diff options
Diffstat (limited to 'OvmfPkg/SataControllerDxe/SataController.h')
| -rw-r--r-- | OvmfPkg/SataControllerDxe/SataController.h | 544 |
1 files changed, 0 insertions, 544 deletions
diff --git a/OvmfPkg/SataControllerDxe/SataController.h b/OvmfPkg/SataControllerDxe/SataController.h deleted file mode 100644 index cb1abacfdc..0000000000 --- a/OvmfPkg/SataControllerDxe/SataController.h +++ /dev/null @@ -1,544 +0,0 @@ -/** @file
- Header file for Sata Controller driver.
-
- Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-#ifndef _SATA_CONTROLLER_H_
-#define _SATA_CONTROLLER_H_
-
-#include <Uefi.h>
-#include <Protocol/ComponentName.h>
-#include <Protocol/DriverBinding.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/IdeControllerInit.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/DebugLib.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <IndustryStandard/Pci.h>
-
-//
-// Global Variables definitions
-//
-extern EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2;
-
-#define AHCI_BAR_INDEX 0x05
-#define R_AHCI_CAP 0x0
-#define B_AHCI_CAP_NPS (BIT4 | BIT3 | BIT2 | BIT1 | BIT0) // Number of Ports
-#define B_AHCI_CAP_SPM BIT17 // Supports Port Multiplier
-
-///
-/// AHCI each channel can have up to 1 device
-///
-#define AHCI_MAX_DEVICES 0x01
-
-///
-/// AHCI each channel can have 15 devices in the presence of a multiplier
-///
-#define AHCI_MULTI_MAX_DEVICES 0x0F
-
-///
-/// IDE supports 2 channel max
-///
-#define IDE_MAX_CHANNEL 0x02
-
-///
-/// IDE supports 2 devices max
-///
-#define IDE_MAX_DEVICES 0x02
-
-#define SATA_ENUMER_ALL FALSE
-
-//
-// Sata Controller driver private data structure
-//
-
-#define SATA_CONTROLLER_SIGNATURE SIGNATURE_32('S','A','T','A')
-
-typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {
- //
- // Standard signature used to identify Sata Controller private data
- //
- UINT32 Signature;
-
- //
- // Protocol instance of IDE_CONTROLLER_INIT produced by this driver
- //
- EFI_IDE_CONTROLLER_INIT_PROTOCOL IdeInit;
-
- //
- // Copy of protocol pointers used by this driver
- //
- EFI_PCI_IO_PROTOCOL *PciIo;
-
- //
- // Original PCI attributes
- //
- UINT64 OriginalPciAttributes;
-
- //
- // The number of devices that are supported by this channel
- //
- UINT8 DeviceCount;
-
- //
- // The highest disqulified mode for each attached device,
- // From ATA/ATAPI spec, if a mode is not supported,
- // the modes higher than it is also not supported
- //
- EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;
-
- //
- // A copy of EFI_IDENTIFY_DATA data for each attached SATA device and its flag
- //
- EFI_IDENTIFY_DATA *IdentifyData;
- BOOLEAN *IdentifyValid;
-} EFI_SATA_CONTROLLER_PRIVATE_DATA;
-
-#define SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS(a) CR(a, EFI_SATA_CONTROLLER_PRIVATE_DATA, IdeInit, SATA_CONTROLLER_SIGNATURE)
-
-//
-// Driver binding functions declaration
-//
-
-/**
- Supported function of Driver Binding protocol for this driver.
- Test to see if this driver supports ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to test.
- @param RemainingDevicePath A pointer to the device path. Should be ignored by
- device driver.
-
- @retval EFI_SUCCESS This driver supports this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-;
-
-/**
- This routine is called right after the .Supported() called and
- Start this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to bind driver to.
- @param RemainingDevicePath A pointer to the device path. Should be ignored by
- device driver.
-
- @retval EFI_SUCCESS This driver is added to this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other Some error occurs when binding this driver to this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- )
-;
-
-/**
- Stop this driver on ControllerHandle.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on.
- @param NumberOfChildren Not used.
- @param ChildHandleBuffer Not used.
-
- @retval EFI_SUCCESS This driver is removed from this device.
- @retval other Some error occurs when removing this driver from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-SataControllerStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- )
-;
-
-//
-// IDE controller init functions declaration
-//
-
-/**
- Returns the information about the specified IDE channel.
-
- This function can be used to obtain information about a particular IDE channel.
- The driver entity uses this information during the enumeration process.
-
- If Enabled is set to FALSE, the driver entity will not scan the channel. Note
- that it will not prevent an operating system driver from scanning the channel.
-
- For most of today's controllers, MaxDevices will either be 1 or 2. For SATA
- controllers, this value will always be 1. SATA configurations can contain SATA
- port multipliers. SATA port multipliers behave like SATA bridges and can support
- up to 16 devices on the other side. If a SATA port out of the IDE controller
- is connected to a port multiplier, MaxDevices will be set to the number of SATA
- devices that the port multiplier supports. Because today's port multipliers
- support up to fifteen SATA devices, this number can be as large as fifteen. The IDE
- bus driver is required to scan for the presence of port multipliers behind an SATA
- controller and enumerate up to MaxDevices number of devices behind the port
- multiplier.
-
- In this context, the devices behind a port multiplier constitute a channel.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[out] Enabled TRUE if this channel is enabled. Disabled channels
- are not scanned to see if any devices are present.
- @param[out] MaxDevices The maximum number of IDE devices that the bus driver
- can expect on this channel. For the ATA/ATAPI
- specification, version 6, this number will either be
- one or two. For Serial ATA (SATA) configurations with a
- port multiplier, this number can be as large as fifteen.
-
- @retval EFI_SUCCESS Information was returned without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitGetChannelInfo (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- OUT BOOLEAN *Enabled,
- OUT UINT8 *MaxDevices
- )
-;
-
-/**
- The notifications from the driver entity that it is about to enter a certain
- phase of the IDE channel enumeration process.
-
- This function can be used to notify the IDE controller driver to perform
- specific actions, including any chipset-specific initialization, so that the
- chipset is ready to enter the next phase. Seven notification points are defined
- at this time.
-
- More synchronization points may be added as required in the future.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Phase The phase during enumeration.
- @param[in] Channel Zero-based channel number.
-
- @retval EFI_SUCCESS The notification was accepted without any errors.
- @retval EFI_UNSUPPORTED Phase is not supported.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_NOT_READY This phase cannot be entered at this time; for
- example, an attempt was made to enter a Phase
- without having entered one or more previous
- Phase.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitNotifyPhase (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,
- IN UINT8 Channel
- )
-;
-
-/**
- Submits the device information to the IDE controller driver.
-
- This function is used by the driver entity to pass detailed information about
- a particular device to the IDE controller driver. The driver entity obtains
- this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData
- is the pointer to the response data buffer. The IdentifyData buffer is owned
- by the driver entity, and the IDE controller driver must make a local copy
- of the entire buffer or parts of the buffer as needed. The original IdentifyData
- buffer pointer may not be valid when
-
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or
- - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.
-
- The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to
- compute the optimum mode for the device. These fields are not limited to the
- timing information. For example, an implementation of the IDE controller driver
- may examine the vendor and type/mode field to match known bad drives.
-
- The driver entity may submit drive information in any order, as long as it
- submits information for all the devices belonging to the enumeration group
- before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device
- in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- should be called with IdentifyData set to NULL. The IDE controller driver may
- not have any other mechanism to know whether a device is present or not. Therefore,
- setting IdentifyData to NULL does not constitute an error condition.
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a
- given (Channel, Device) pair.
-
- @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.
-
- @retval EFI_SUCCESS The information was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSubmitData (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_IDENTIFY_DATA *IdentifyData
- )
-;
-
-/**
- Disqualifies specific modes for an IDE device.
-
- This function allows the driver entity or other drivers (such as platform
- drivers) to reject certain timing modes and request the IDE controller driver
- to recalculate modes. This function allows the driver entity and the IDE
- controller driver to negotiate the timings on a per-device basis. This function
- is useful in the case of drives that lie about their capabilities. An example
- is when the IDE device fails to accept the timing modes that are calculated
- by the IDE controller driver based on the response to the Identify Drive command.
-
- If the driver entity does not want to limit the ATA timing modes and leave that
- decision to the IDE controller driver, it can either not call this function for
- the given device or call this function and set the Valid flag to FALSE for all
- modes that are listed in EFI_ATA_COLLECTIVE_MODE.
-
- The driver entity may disqualify modes for a device in any order and any number
- of times.
-
- This function can be called multiple times to invalidate multiple modes of the
- same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI
- specification for more information on PIO modes.
-
- For Serial ATA (SATA) controllers, this member function can be used to disqualify
- a higher transfer rate mode on a given channel. For example, a platform driver
- may inform the IDE controller driver to not use second-generation (Gen2) speeds
- for a certain SATA drive.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel The zero-based channel number.
- @param[in] Device The zero-based device number on the Channel.
- @param[in] BadModes The modes that the device does not support and that
- should be disqualified.
-
- @retval EFI_SUCCESS The modes were accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER IdentifyData is NULL.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitDisqualifyMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *BadModes
- )
-;
-
-/**
- Returns the information about the optimum modes for the specified IDE device.
-
- This function is used by the driver entity to obtain the optimum ATA modes for
- a specific device. The IDE controller driver takes into account the following
- while calculating the mode:
- - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()
-
- The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- for all the devices that belong to an enumeration group before calling
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group.
-
- The IDE controller driver will use controller- and possibly platform-specific
- algorithms to arrive at SupportedModes. The IDE controller may base its
- decision on user preferences and other considerations as well. This function
- may be called multiple times because the driver entity may renegotiate the mode
- with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().
-
- The driver entity may collect timing information for various devices in any
- order. The driver entity is responsible for making sure that all the dependencies
- are satisfied. For example, the SupportedModes information for device A that
- was previously returned may become stale after a call to
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.
-
- The buffer SupportedModes is allocated by the callee because the caller does
- not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE
- is defined in a way that allows for future extensibility and can be of variable
- length. This memory pool should be deallocated by the caller when it is no
- longer necessary.
-
- The IDE controller driver for a Serial ATA (SATA) controller can use this
- member function to force a lower speed (first-generation [Gen1] speeds on a
- second-generation [Gen2]-capable hardware). The IDE controller driver can
- also allow the driver entity to stay with the speed that has been negotiated
- by the physical layer.
-
- @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel A zero-based channel number.
- @param[in] Device A zero-based device number on the Channel.
- @param[out] SupportedModes The optimum modes for the device.
-
- @retval EFI_SUCCESS SupportedModes was returned.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_INVALID_PARAMETER SupportedModes is NULL.
- @retval EFI_NOT_READY Modes cannot be calculated due to a lack of
- data. This error may happen if
- EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()
- and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData()
- were not called for at least one drive in the
- same enumeration group.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitCalculateMode (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes
- )
-;
-
-/**
- Commands the IDE controller driver to program the IDE controller hardware
- so that the specified device can operate at the specified mode.
-
- This function is used by the driver entity to instruct the IDE controller
- driver to program the IDE controller hardware to the specified modes. This
- function can be called only once for a particular device. For a Serial ATA
- (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-
- specific programming may be required.
-
- @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.
- @param[in] Channel Zero-based channel number.
- @param[in] Device Zero-based device number on the Channel.
- @param[in] Modes The modes to set.
-
- @retval EFI_SUCCESS The command was accepted without any errors.
- @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).
- @retval EFI_INVALID_PARAMETER Device is invalid.
- @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.
- @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.
- The driver entity should not use this device.
-
-**/
-EFI_STATUS
-EFIAPI
-IdeInitSetTiming (
- IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN EFI_ATA_COLLECTIVE_MODE *Modes
- )
-;
-
-//
-// Forward reference declaration
-//
-
-/**
- Retrieves a Unicode string that is the user readable name of the UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param Language A pointer to a three character ISO 639-2 language identifier.
- This is the language of the driver name that the caller
- is requesting, and it must match one of the languages specified
- in SupportedLanguages. The number of languages supported by a
- driver is up to the driver writer.
- @param DriverName A pointer to the Unicode string to return. This Unicode string
- is the name of the driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by This
- and the language specified by Language was returned
- in DriverName.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetDriverName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN CHAR8 *Language,
- OUT CHAR16 **DriverName
- )
-;
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by an UEFI Driver.
-
- @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.
- @param ControllerHandle The handle of a controller that the driver specified by
- This is managing. This handle specifies the controller
- whose name is to be returned.
- @param OPTIONAL ChildHandle The handle of the child controller to retrieve the name
- of. This is an optional parameter that may be NULL. It
- will be NULL for device drivers. It will also be NULL
- for a bus drivers that wish to retrieve the name of the
- bus controller. It will not be NULL for a bus driver
- that wishes to retrieve the name of a child controller.
- @param Language A pointer to a three character ISO 639-2 language
- identifier. This is the language of the controller name
- that the caller is requesting, and it must match one
- of the languages specified in SupportedLanguages. The
- number of languages supported by a driver is up to the
- driver writer.
- @param ControllerName A pointer to the Unicode string to return. This Unicode
- string is the name of the controller specified by
- ControllerHandle and ChildHandle in the language
- specified by Language from the point of view of the
- driver specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in the
- language specified by Language for the driver
- specified by This was returned in DriverName.
- @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
- @retval EFI_INVALID_PARAMETER Language is NULL.
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
- @retval EFI_UNSUPPORTED The driver specified by This does not support the
- language specified by Language.
-**/
-EFI_STATUS
-EFIAPI
-SataControllerComponentNameGetControllerName (
- IN EFI_COMPONENT_NAME_PROTOCOL *This,
- IN EFI_HANDLE ControllerHandle,
- IN EFI_HANDLE ChildHandle OPTIONAL,
- IN CHAR8 *Language,
- OUT CHAR16 **ControllerName
- )
-;
-
-#endif
|