diff options
Diffstat (limited to 'PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c')
-rw-r--r-- | PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c | 245 |
1 files changed, 182 insertions, 63 deletions
diff --git a/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c b/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c index b38963157c..4f165bdc52 100644 --- a/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c +++ b/PcAtChipsetPkg/HpetTimerDxe/HpetTimer.c @@ -183,11 +183,21 @@ EFI_TIMER_NOTIFY mTimerNotifyFunction = NULL; UINT64 mTimerPeriod = 0;
///
-/// Accumulates HPET timer ticks to account for time passed when the
-/// HPET timer is disabled or when there is no timer notification function
-/// registered.
+/// The number of HPET timer ticks required for the current HPET rate specified by mTimerPeriod.
///
-volatile UINT64 mTimerAccumulator = 0;
+UINT64 mTimerCount;
+
+///
+/// Mask used for counter and comparator calculations to adjust for a 32-bit or 64-bit counter.
+///
+UINT64 mCounterMask;
+
+///
+/// The HPET main counter value from the most recent HPET timer interrupt.
+///
+volatile UINT64 mPreviousMainCounter;
+
+volatile UINT64 mPreviousComparator;
///
/// The index of the HPET timer being managed by this driver.
@@ -288,8 +298,11 @@ TimerInterruptHandler ( IN EFI_SYSTEM_CONTEXT SystemContext
)
{
+ UINT64 MainCounter;
+ UINT64 Comparator;
UINT64 TimerPeriod;
-
+ UINT64 Delta;
+
//
// Count number of ticks
//
@@ -306,30 +319,76 @@ TimerInterruptHandler ( SendApicEoi ();
//
- // Accumulate time from the HPET main counter value
+ // Disable HPET timer when adjusting the COMPARATOR value to prevent a missed interrupt
+ //
+ HpetEnable (FALSE);
+
+ //
+ // Capture main counter value
//
- mTimerAccumulator += HpetRead (HPET_MAIN_COUNTER_OFFSET);
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
//
- // Reset HPET main counter to 0
+ // Get the previous comparator counter
//
- HpetWrite (HPET_MAIN_COUNTER_OFFSET, 0);
+ mPreviousComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
//
+ // Set HPET COMPARATOR to the value required for the next timer tick
+ //
+ Comparator = (mPreviousComparator + mTimerCount) & mCounterMask;
+
+ if ((mPreviousMainCounter < MainCounter) && (mPreviousComparator > Comparator)) {
+ //
+ // When comparator overflows
+ //
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
+ } else if ((mPreviousMainCounter > MainCounter) && (mPreviousComparator < Comparator)) {
+ //
+ // When main counter overflows
+ //
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
+ } else {
+ //
+ // When both main counter and comparator do not overflow or both do overflow
+ //
+ if (Comparator > MainCounter) {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, Comparator);
+ } else {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + mTimerCount) & mCounterMask);
+ }
+ }
+
+ //
+ // Enable the HPET counter once the new COMPARATOR value has been set.
+ //
+ HpetEnable (TRUE);
+
+ //
// Check to see if there is a registered notification function
//
if (mTimerNotifyFunction != NULL) {
//
// Compute time since last notification in 100 ns units (10 ^ -7)
//
+ if (MainCounter > mPreviousMainCounter) {
+ //
+ // Main counter does not overflow
+ //
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ //
+ // Main counter overflows, first usb, then add
+ //
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
TimerPeriod = DivU64x32 (
MultU64x32 (
- mTimerAccumulator,
+ Delta & mCounterMask,
mHpetGeneralCapabilities.Bits.CounterClockPeriod
),
100000000
);
- mTimerAccumulator = 0;
//
// Call registered notification function passing in the time since the last
@@ -337,6 +396,11 @@ TimerInterruptHandler ( //
mTimerNotifyFunction (TimerPeriod);
}
+
+ //
+ // Save main counter value
+ //
+ mPreviousMainCounter = MainCounter;
}
/**
@@ -428,14 +492,39 @@ TimerDriverSetTimerPeriod ( IN UINT64 TimerPeriod
)
{
- UINT64 TimerCount;
-
+ UINT64 MainCounter;
+ UINT64 Delta;
+ UINT64 CurrentComparator;
+
//
// Disable HPET timer when adjusting the timer period
//
HpetEnable (FALSE);
if (TimerPeriod == 0) {
+ if (mTimerPeriod != 0) {
+ //
+ // Check if there is possibly a pending interrupt
+ //
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+ if (MainCounter < mPreviousMainCounter) {
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ } else {
+ Delta = MainCounter - mPreviousMainCounter;
+ }
+ if ((Delta & mCounterMask) >= mTimerCount) {
+ //
+ // Interrupt still happens after disable HPET, wait to be processed
+ // Wait until interrupt is processed and comparator is increased
+ //
+ CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ while (CurrentComparator == mPreviousComparator) {
+ CurrentComparator = HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ CpuPause();
+ }
+ }
+ }
+
//
// If TimerPeriod is 0, then mask HPET Timer interrupts
//
@@ -463,36 +552,24 @@ TimerDriverSetTimerPeriod ( // per tick of the HPET counter to determine the number of HPET counter ticks
// in TimerPeriod 100 ns units.
//
- TimerCount = DivU64x32 (
- MultU64x32 (TimerPeriod, 100000000),
- mHpetGeneralCapabilities.Bits.CounterClockPeriod
- );
+ mTimerCount = DivU64x32 (
+ MultU64x32 (TimerPeriod, 100000000),
+ mHpetGeneralCapabilities.Bits.CounterClockPeriod
+ );
//
// Program the HPET Comparator with the number of ticks till the next interrupt
//
- HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, TimerCount);
-
- //
- // Capture the number of ticks since the last HPET Timer interrupt before
- // clearing the main counter. This value will be used in the next HPET
- // timer interrupt handler to compute the total amount of time since the
- // last HPET timer interrupt
- //
- mTimerAccumulator = HpetRead (HPET_MAIN_COUNTER_OFFSET);
-
- //
- // If the number of ticks since the last timer interrupt is greater than the
- // timer period, reduce the number of ticks till the next interrupt to 1, so
- // a timer interrupt will be generated as soon as the HPET counter is enabled.
- //
- if (mTimerAccumulator >= TimerCount) {
- HpetWrite (HPET_MAIN_COUNTER_OFFSET, TimerCount - 1);
- //
- // Adjust the accumulator down by TimerCount ticks because TimerCount
- // ticks will be added to the accumulator on the next interrupt
- //
- mTimerAccumulator -= TimerCount;
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+ if (MainCounter > mPreviousMainCounter) {
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
+ if ((Delta & mCounterMask) >= mTimerCount) {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (MainCounter + 1) & mCounterMask);
+ } else {
+ HpetWrite (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, (mPreviousMainCounter + mTimerCount) & mCounterMask);
}
//
@@ -585,23 +662,20 @@ TimerDriverGenerateSoftInterrupt ( IN EFI_TIMER_ARCH_PROTOCOL *This
)
{
+ UINT64 MainCounter;
EFI_TPL Tpl;
UINT64 TimerPeriod;
+ UINT64 Delta;
//
// Disable interrupts
//
Tpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);
-
- //
- // Read the current HPET main counter value
- //
- mTimerAccumulator += HpetRead (HPET_MAIN_COUNTER_OFFSET);
-
+
//
- // Reset HPET main counter to 0
+ // Capture main counter value
//
- HpetWrite (HPET_MAIN_COUNTER_OFFSET, 0);
+ MainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
//
// Check to see if there is a registered notification function
@@ -610,14 +684,25 @@ TimerDriverGenerateSoftInterrupt ( //
// Compute time since last interrupt in 100 ns units (10 ^ -7)
//
+ if (MainCounter > mPreviousMainCounter) {
+ //
+ // Main counter does not overflow
+ //
+ Delta = MainCounter - mPreviousMainCounter;
+ } else {
+ //
+ // Main counter overflows, first usb, then add
+ //
+ Delta = (mCounterMask - mPreviousMainCounter) + MainCounter;
+ }
+
TimerPeriod = DivU64x32 (
MultU64x32 (
- mTimerAccumulator,
+ Delta & mCounterMask,
mHpetGeneralCapabilities.Bits.CounterClockPeriod
),
100000000
);
- mTimerAccumulator = 0;
//
// Call registered notification function passing in the time since the last
@@ -627,6 +712,11 @@ TimerDriverGenerateSoftInterrupt ( }
//
+ // Save main counter value
+ //
+ mPreviousMainCounter = MainCounter;
+
+ //
// Restore interrupts
//
gBS->RestoreTPL (Tpl);
@@ -696,20 +786,25 @@ TimerDriverInitialize ( // Dump HPET Configuration Information
//
DEBUG_CODE (
- DEBUG ((DEBUG_INFO, "HPET Base Address = %08x\n", PcdGet32 (PcdHpetBaseAddress)));
- DEBUG ((DEBUG_INFO, " HPET_GENERAL_CAPABILITIES_ID = %016lx\n", mHpetGeneralCapabilities));
- DEBUG ((DEBUG_INFO, " HPET_GENERAL_CONFIGURATION = %016lx\n", mHpetGeneralConfiguration.Uint64));
- DEBUG ((DEBUG_INFO, " HPET_GENERAL_INTERRUPT_STATUS = %016lx\n", HpetRead (HPET_GENERAL_INTERRUPT_STATUS_OFFSET)));
- DEBUG ((DEBUG_INFO, " HPET_MAIN_COUNTER = %016lx\n", HpetRead (HPET_MAIN_COUNTER_OFFSET)));
+ DEBUG ((DEBUG_INFO, "HPET Base Address = 0x%08x\n", PcdGet32 (PcdHpetBaseAddress)));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_CAPABILITIES_ID = 0x%016lx\n", mHpetGeneralCapabilities));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_CONFIGURATION = 0x%016lx\n", mHpetGeneralConfiguration.Uint64));
+ DEBUG ((DEBUG_INFO, " HPET_GENERAL_INTERRUPT_STATUS = 0x%016lx\n", HpetRead (HPET_GENERAL_INTERRUPT_STATUS_OFFSET)));
+ DEBUG ((DEBUG_INFO, " HPET_MAIN_COUNTER = 0x%016lx\n", HpetRead (HPET_MAIN_COUNTER_OFFSET)));
DEBUG ((DEBUG_INFO, " HPET Main Counter Period = %d (fs)\n", mHpetGeneralCapabilities.Bits.CounterClockPeriod));
for (TimerIndex = 0; TimerIndex <= mHpetGeneralCapabilities.Bits.NumberOfTimers; TimerIndex++) {
- DEBUG ((DEBUG_INFO, " HPET_TIMER%d_CONFIGURATION = %016lx\n", TimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
- DEBUG ((DEBUG_INFO, " HPET_TIMER%d_COMPARATOR = %016lx\n", TimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
- DEBUG ((DEBUG_INFO, " HPET_TIMER%d_MSI_ROUTE = %016lx\n", TimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_COMPARATOR = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, " HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", TimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + TimerIndex * HPET_TIMER_STRIDE)));
}
);
//
+ // Capture the current HPET main counter value.
+ //
+ mPreviousMainCounter = HpetRead (HPET_MAIN_COUNTER_OFFSET);
+
+ //
// Determine the interrupt mode to use for the HPET Timer.
// Look for MSI first, then unused PIC mode interrupt, then I/O APIC mode interrupt
//
@@ -801,8 +896,29 @@ TimerDriverInitialize ( //
mTimerConfiguration.Bits.InterruptEnable = 0;
mTimerConfiguration.Bits.PeriodicInterruptEnable = 0;
- mTimerConfiguration.Bits.CounterSizeEnable = 0;
+ mTimerConfiguration.Bits.CounterSizeEnable = 1;
HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+
+ //
+ // Read the HPET Timer Capabilities and Configuration register back again.
+ // CounterSizeEnable will be read back as a 0 if it is a 32-bit only timer
+ //
+ mTimerConfiguration.Uint64 = HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE);
+ if ((mTimerConfiguration.Bits.CounterSizeEnable == 1) && (sizeof (UINTN) == sizeof (UINT64))) {
+ DEBUG ((DEBUG_INFO, "Choose 64-bit HPET timer.\n"));
+ //
+ // 64-bit BIOS can use 64-bit HPET timer
+ //
+ mCounterMask = 0xffffffffffffffffULL;
+ //
+ // Set timer back to 64-bit
+ //
+ mTimerConfiguration.Bits.CounterSizeEnable = 0;
+ HpetWrite (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE, mTimerConfiguration.Uint64);
+ } else {
+ DEBUG ((DEBUG_INFO, "Choose 32-bit HPET timer.\n"));
+ mCounterMask = 0x00000000ffffffffULL;
+ }
//
// Install interrupt handler for selected HPET Timer
@@ -832,12 +948,15 @@ TimerDriverInitialize ( DEBUG ((DEBUG_INFO, "HPET Interrupt Mode MSI\n"));
} else {
DEBUG ((DEBUG_INFO, "HPET Interrupt Mode I/O APIC\n"));
- DEBUG ((DEBUG_INFO, "HPET I/O APIC IRQ = %02x\n", mTimerIrq));
+ DEBUG ((DEBUG_INFO, "HPET I/O APIC IRQ = 0x%02x\n", mTimerIrq));
}
- DEBUG ((DEBUG_INFO, "HPET Interrupt Vector = %02x\n", PcdGet8 (PcdHpetLocalApicVector)));
- DEBUG ((DEBUG_INFO, "HPET_TIMER%d_CONFIGURATION = %016lx\n", mTimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
- DEBUG ((DEBUG_INFO, "HPET_TIMER%d_COMPARATOR = %016lx\n", mTimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
- DEBUG ((DEBUG_INFO, "HPET_TIMER%d_MSI_ROUTE = %016lx\n", mTimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, "HPET Interrupt Vector = 0x%02x\n", PcdGet8 (PcdHpetLocalApicVector)));
+ DEBUG ((DEBUG_INFO, "HPET Counter Mask = 0x%016lx\n", mCounterMask));
+ DEBUG ((DEBUG_INFO, "HPET Timer Period = %d\n", mTimerPeriod));
+ DEBUG ((DEBUG_INFO, "HPET Timer Count = 0x%016lx\n", mTimerCount));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_CONFIGURATION = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_CONFIGURATION_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_COMPARATOR = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_COMPARATOR_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
+ DEBUG ((DEBUG_INFO, "HPET_TIMER%d_MSI_ROUTE = 0x%016lx\n", mTimerIndex, HpetRead (HPET_TIMER_MSI_ROUTE_OFFSET + mTimerIndex * HPET_TIMER_STRIDE)));
//
// Wait for a few timer interrupts to fire before continuing
|