diff options
Diffstat (limited to 'QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/Ohci.h')
| -rw-r--r-- | QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/Ohci.h | 663 |
1 files changed, 0 insertions, 663 deletions
diff --git a/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/Ohci.h b/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/Ohci.h deleted file mode 100644 index 4c374ab9e2..0000000000 --- a/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/Ohci.h +++ /dev/null @@ -1,663 +0,0 @@ -/** @file
-Provides the definition of Usb Hc Protocol and OHCI controller
-private data structure.
-
-Copyright (c) 2013-2016 Intel Corporation.
-
-SPDX-License-Identifier: BSD-2-Clause-Patent
-
-**/
-
-
-
-#ifndef _OHCI_H
-#define _OHCI_H
-
-
-#include <Uefi.h>
-
-#include <Protocol/UsbHostController.h>
-#include <Protocol/PciIo.h>
-
-#include <Guid/EventGroup.h>
-
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/BaseLib.h>
-#include <Library/MemoryAllocationLib.h>
-
-#include <IndustryStandard/Pci.h>
-
-
-typedef struct _USB_OHCI_HC_DEV USB_OHCI_HC_DEV;
-
-#include "UsbHcMem.h"
-#include "OhciReg.h"
-#include "OhciSched.h"
-#include "OhciUrb.h"
-#include "Descriptor.h"
-#include "ComponentName.h"
-#include "OhciDebug.h"
-
-extern EFI_DRIVER_BINDING_PROTOCOL gOhciDriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gOhciComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gOhciComponentName2;
-
-#define USB_OHCI_HC_DEV_SIGNATURE SIGNATURE_32('o','h','c','i')
-
-typedef struct _HCCA_MEMORY_BLOCK{
- UINT32 HccaInterruptTable[32]; // 32-bit Physical Address to ED_DESCRIPTOR
- UINT16 HccaFrameNumber;
- UINT16 HccaPad;
- UINT32 HccaDoneHead; // 32-bit Physical Address to TD_DESCRIPTOR
- UINT8 Reserved[116];
-} HCCA_MEMORY_BLOCK;
-
-
-struct _USB_OHCI_HC_DEV {
- UINTN Signature;
- EFI_USB_HC_PROTOCOL UsbHc;
- EFI_USB2_HC_PROTOCOL Usb2Hc;
- EFI_PCI_IO_PROTOCOL *PciIo;
- UINT64 OriginalPciAttributes;
-
- HCCA_MEMORY_BLOCK *HccaMemoryBlock;
- VOID *HccaMemoryBuf;
- VOID *HccaMemoryMapping;
- UINTN HccaMemoryPages;
-
- ED_DESCRIPTOR *IntervalList[6][32];
- INTERRUPT_CONTEXT_ENTRY *InterruptContextList;
- VOID *MemPool;
-
- UINT32 ToggleFlag;
-
- EFI_EVENT HouseKeeperTimer;
- //
- // ExitBootServicesEvent is used to stop the OHC DMA operation
- // after exit boot service.
- //
- EFI_EVENT ExitBootServiceEvent;
-
- EFI_UNICODE_STRING_TABLE *ControllerNameTable;
-};
-
-#define USB_OHCI_HC_DEV_FROM_THIS(a) CR(a, USB_OHCI_HC_DEV, UsbHc, USB_OHCI_HC_DEV_SIGNATURE)
-#define USB2_OHCI_HC_DEV_FROM_THIS(a) CR(a, USB_OHCI_HC_DEV, Usb2Hc, USB_OHCI_HC_DEV_SIGNATURE)
-
-//
-// Func List
-//
-
-/**
- Provides software reset for the USB host controller.
-
- @param This This EFI_USB_HC_PROTOCOL instance.
- @param Attributes A bit mask of the reset operation to perform.
-
- @retval EFI_SUCCESS The reset operation succeeded.
- @retval EFI_INVALID_PARAMETER Attributes is not valid.
- @retval EFI_UNSUPPOURTED The type of reset specified by Attributes is
- not currently supported by the host controller.
- @retval EFI_DEVICE_ERROR Host controller isn't halted to reset.
-
-**/
-EFI_STATUS
-EFIAPI
-OhciReset (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT16 Attributes
- );
-/**
- Retrieve the current state of the USB host controller.
-
- @param This This EFI_USB_HC_PROTOCOL instance.
- @param State Variable to return the current host controller
- state.
-
- @retval EFI_SUCCESS Host controller state was returned in State.
- @retval EFI_INVALID_PARAMETER State is NULL.
- @retval EFI_DEVICE_ERROR An error was encountered while attempting to
- retrieve the host controller's current state.
-
-**/
-
-EFI_STATUS
-EFIAPI
-OhciGetState (
- IN EFI_USB_HC_PROTOCOL *This,
- OUT EFI_USB_HC_STATE *State
- );
-/**
- Sets the USB host controller to a specific state.
-
- @param This This EFI_USB_HC_PROTOCOL instance.
- @param State The state of the host controller that will be set.
-
- @retval EFI_SUCCESS The USB host controller was successfully placed
- in the state specified by State.
- @retval EFI_INVALID_PARAMETER State is invalid.
- @retval EFI_DEVICE_ERROR Failed to set the state due to device error.
-
-**/
-
-EFI_STATUS
-EFIAPI
-OhciSetState(
- IN EFI_USB_HC_PROTOCOL *This,
- IN EFI_USB_HC_STATE State
- );
-/**
-
- Submits control transfer to a target USB device.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param IsSlowDevice Indicates whether the target device is slow device
- or full-speed device.
- @param MaxPaketLength Indicates the maximum packet size that the
- default control transfer endpoint is capable of
- sending or receiving.
- @param Request A pointer to the USB device request that will be sent
- to the USB device.
- @param TransferDirection Specifies the data direction for the transfer.
- There are three values available, DataIn, DataOut
- and NoData.
- @param Data A pointer to the buffer of data that will be transmitted
- to USB device or received from USB device.
- @param DataLength Indicates the size, in bytes, of the data buffer
- specified by Data.
- @param TimeOut Indicates the maximum time, in microseconds,
- which the transfer is allowed to complete.
- @param TransferResult A pointer to the detailed result information generated
- by this control transfer.
-
- @retval EFI_SUCCESS The control transfer was completed successfully.
- @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
- @retval EFI_INVALID_PARAMETER Some parameters are invalid.
- @retval EFI_TIMEOUT The control transfer failed due to timeout.
- @retval EFI_DEVICE_ERROR The control transfer failed due to host controller or device error.
- Caller should check TranferResult for detailed error information.
-
---*/
-
-
-EFI_STATUS
-EFIAPI
-OhciControlTransfer (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN BOOLEAN IsSlowDevice,
- IN UINT8 MaxPacketLength,
- IN EFI_USB_DEVICE_REQUEST *Request,
- IN EFI_USB_DATA_DIRECTION TransferDirection,
- IN OUT VOID *Data OPTIONAL,
- IN OUT UINTN *DataLength OPTIONAL,
- IN UINTN TimeOut,
- OUT UINT32 *TransferResult
- );
-/**
-
- Submits bulk transfer to a bulk endpoint of a USB device.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress The combination of an endpoint number and an
- endpoint direction of the target USB device.
- Each endpoint address supports data transfer in
- one direction except the control endpoint
- (whose default endpoint address is 0).
- It is the caller's responsibility to make sure that
- the EndPointAddress represents a bulk endpoint.
- @param MaximumPacketLength Indicates the maximum packet size the target endpoint
- is capable of sending or receiving.
- @param Data A pointer to the buffer of data that will be transmitted
- to USB device or received from USB device.
- @param DataLength When input, indicates the size, in bytes, of the data buffer
- specified by Data. When output, indicates the actually
- transferred data size.
- @param DataToggle A pointer to the data toggle value. On input, it indicates
- the initial data toggle value the bulk transfer should adopt;
- on output, it is updated to indicate the data toggle value
- of the subsequent bulk transfer.
- @param TimeOut Indicates the maximum time, in microseconds, which the
- transfer is allowed to complete.
- TransferResult A pointer to the detailed result information of the
- bulk transfer.
-
- @retval EFI_SUCCESS The bulk transfer was completed successfully.
- @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be submitted due to lack of resource.
- @retval EFI_INVALID_PARAMETER Some parameters are invalid.
- @retval EFI_TIMEOUT The bulk transfer failed due to timeout.
- @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
- Caller should check TranferResult for detailed error information.
-
-**/
-
-
-EFI_STATUS
-EFIAPI
-OhciBulkTransfer(
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN UINT8 MaxPacketLength,
- IN OUT VOID *Data,
- IN OUT UINTN *DataLength,
- IN OUT UINT8 *DataToggle,
- IN UINTN TimeOut,
- OUT UINT32 *TransferResult
- );
-/**
-
- Submits an interrupt transfer to an interrupt endpoint of a USB device.
-
- @param Ohc Device private data
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress The combination of an endpoint number and an endpoint
- direction of the target USB device. Each endpoint address
- supports data transfer in one direction except the
- control endpoint (whose default endpoint address is 0).
- It is the caller's responsibility to make sure that
- the EndPointAddress represents an interrupt endpoint.
- @param IsSlowDevice Indicates whether the target device is slow device
- or full-speed device.
- @param MaxPacketLength Indicates the maximum packet size the target endpoint
- is capable of sending or receiving.
- @param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between
- the host and the target interrupt endpoint.
- If FALSE, the specified asynchronous interrupt pipe
- is canceled.
- @param DataToggle A pointer to the data toggle value. On input, it is valid
- when IsNewTransfer is TRUE, and it indicates the initial
- data toggle value the asynchronous interrupt transfer
- should adopt.
- On output, it is valid when IsNewTransfer is FALSE,
- and it is updated to indicate the data toggle value of
- the subsequent asynchronous interrupt transfer.
- @param PollingInterval Indicates the interval, in milliseconds, that the
- asynchronous interrupt transfer is polled.
- This parameter is required when IsNewTransfer is TRUE.
- @param UCBuffer Uncacheable buffer
- @param DataLength Indicates the length of data to be received at the
- rate specified by PollingInterval from the target
- asynchronous interrupt endpoint. This parameter
- is only required when IsNewTransfer is TRUE.
- @param CallBackFunction The Callback function.This function is called at the
- rate specified by PollingInterval.This parameter is
- only required when IsNewTransfer is TRUE.
- @param Context The context that is passed to the CallBackFunction.
- This is an optional parameter and may be NULL.
- @param IsPeriodic Periodic interrupt or not
- @param OutputED The correspoding ED carried out
- @param OutputTD The correspoding TD carried out
-
-
- @retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully
- submitted or canceled.
- @retval EFI_INVALID_PARAMETER Some parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-
-EFI_STATUS
-OhciInterruptTransfer (
- IN USB_OHCI_HC_DEV *Ohc,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN BOOLEAN IsSlowDevice,
- IN UINT8 MaxPacketLength,
- IN BOOLEAN IsNewTransfer,
- IN OUT UINT8 *DataToggle OPTIONAL,
- IN UINTN PollingInterval OPTIONAL,
- IN VOID *UCBuffer OPTIONAL,
- IN UINTN DataLength OPTIONAL,
- IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL,
- IN VOID *Context OPTIONAL,
- IN BOOLEAN IsPeriodic OPTIONAL,
- OUT ED_DESCRIPTOR **OutputED OPTIONAL,
- OUT TD_DESCRIPTOR **OutputTD OPTIONAL
- );
-/**
-
- Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress The combination of an endpoint number and an endpoint
- direction of the target USB device. Each endpoint address
- supports data transfer in one direction except the
- control endpoint (whose default endpoint address is 0).
- It is the caller's responsibility to make sure that
- the EndPointAddress represents an interrupt endpoint.
- @param IsSlowDevice Indicates whether the target device is slow device
- or full-speed device.
- @param MaxiumPacketLength Indicates the maximum packet size the target endpoint
- is capable of sending or receiving.
- @param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between
- the host and the target interrupt endpoint.
- If FALSE, the specified asynchronous interrupt pipe
- is canceled.
- @param DataToggle A pointer to the data toggle value. On input, it is valid
- when IsNewTransfer is TRUE, and it indicates the initial
- data toggle value the asynchronous interrupt transfer
- should adopt.
- On output, it is valid when IsNewTransfer is FALSE,
- and it is updated to indicate the data toggle value of
- the subsequent asynchronous interrupt transfer.
- @param PollingInterval Indicates the interval, in milliseconds, that the
- asynchronous interrupt transfer is polled.
- This parameter is required when IsNewTransfer is TRUE.
- @param DataLength Indicates the length of data to be received at the
- rate specified by PollingInterval from the target
- asynchronous interrupt endpoint. This parameter
- is only required when IsNewTransfer is TRUE.
- @param CallBackFunction The Callback function.This function is called at the
- rate specified by PollingInterval.This parameter is
- only required when IsNewTransfer is TRUE.
- @param Context The context that is passed to the CallBackFunction.
- This is an optional parameter and may be NULL.
-
- @retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully
- submitted or canceled.
- @retval EFI_INVALID_PARAMETER Some parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
-
-**/
-
-
-EFI_STATUS
-EFIAPI
-OhciAsyncInterruptTransfer (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN BOOLEAN IsSlowDevice,
- IN UINT8 MaxPacketLength,
- IN BOOLEAN IsNewTransfer,
- IN OUT UINT8 *DataToggle OPTIONAL,
- IN UINTN PollingInterval OPTIONAL,
- IN UINTN DataLength OPTIONAL,
- IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL,
- IN VOID *Context OPTIONAL
- );
-/**
-
- Submits synchronous interrupt transfer to an interrupt endpoint
- of a USB device.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress The combination of an endpoint number and an endpoint
- direction of the target USB device. Each endpoint
- address supports data transfer in one direction
- except the control endpoint (whose default
- endpoint address is 0). It is the caller's responsibility
- to make sure that the EndPointAddress represents
- an interrupt endpoint.
- @param IsSlowDevice Indicates whether the target device is slow device
- or full-speed device.
- @param MaxPacketLength Indicates the maximum packet size the target endpoint
- is capable of sending or receiving.
- @param Data A pointer to the buffer of data that will be transmitted
- to USB device or received from USB device.
- @param DataLength On input, the size, in bytes, of the data buffer specified
- by Data. On output, the number of bytes transferred.
- @param DataToggle A pointer to the data toggle value. On input, it indicates
- the initial data toggle value the synchronous interrupt
- transfer should adopt;
- on output, it is updated to indicate the data toggle value
- of the subsequent synchronous interrupt transfer.
- @param TimeOut Indicates the maximum time, in microseconds, which the
- transfer is allowed to complete.
- @param TransferResult A pointer to the detailed result information from
- the synchronous interrupt transfer.
-
- @retval EFI_UNSUPPORTED This interface not available.
- @retval EFI_INVALID_PARAMETER Parameters not follow spec
-
-**/
-
-
-EFI_STATUS
-EFIAPI
-OhciSyncInterruptTransfer (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN BOOLEAN IsSlowDevice,
- IN UINT8 MaxPacketLength,
- IN OUT VOID *Data,
- IN OUT UINTN *DataLength,
- IN OUT UINT8 *DataToggle,
- IN UINTN TimeOut,
- OUT UINT32 *TransferResult
- );
-/**
-
- Submits isochronous transfer to a target USB device.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress End point address
- @param MaximumPacketLength Indicates the maximum packet size that the
- default control transfer endpoint is capable of
- sending or receiving.
- @param Data A pointer to the buffer of data that will be transmitted
- to USB device or received from USB device.
- @param DataLength Indicates the size, in bytes, of the data buffer
- specified by Data.
- @param TransferResult A pointer to the detailed result information generated
- by this control transfer.
-
- @retval EFI_UNSUPPORTED This interface not available
- @retval EFI_INVALID_PARAMETER Data is NULL or DataLength is 0 or TransferResult is NULL
-
-**/
-
-
-EFI_STATUS
-EFIAPI
-OhciIsochronousTransfer (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN UINT8 MaximumPacketLength,
- IN OUT VOID *Data,
- IN OUT UINTN DataLength,
- OUT UINT32 *TransferResult
- );
-/**
-
- Submits Async isochronous transfer to a target USB device.
-
- @param his A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param DeviceAddress Represents the address of the target device on the USB,
- which is assigned during USB enumeration.
- @param EndPointAddress End point address
- @param MaximumPacketLength Indicates the maximum packet size that the
- default control transfer endpoint is capable of
- sending or receiving.
- @param Data A pointer to the buffer of data that will be transmitted
- to USB device or received from USB device.
- @param IsochronousCallBack When the transfer complete, the call back function will be called
- @param Context Pass to the call back function as parameter
-
- @retval EFI_UNSUPPORTED This interface not available
- @retval EFI_INVALID_PARAMETER Data is NULL or Datalength is 0
-
-**/
-
-EFI_STATUS
-EFIAPI
-OhciAsyncIsochronousTransfer (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 DeviceAddress,
- IN UINT8 EndPointAddress,
- IN UINT8 MaximumPacketLength,
- IN OUT VOID *Data,
- IN OUT UINTN DataLength,
- IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,
- IN VOID *Context OPTIONAL
- );
-
-/**
-
- Retrieves the number of root hub ports.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param NumOfPorts A pointer to the number of the root hub ports.
-
- @retval EFI_SUCCESS The port number was retrieved successfully.
-**/
-EFI_STATUS
-EFIAPI
-OhciGetRootHubNumOfPorts (
- IN EFI_USB_HC_PROTOCOL *This,
- OUT UINT8 *NumOfPorts
- );
-/**
-
- Retrieves the current status of a USB root hub port.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL.
- @param PortNumber Specifies the root hub port from which the status
- is to be retrieved. This value is zero-based. For example,
- if a root hub has two ports, then the first port is numbered 0,
- and the second port is numbered 1.
- @param PortStatus A pointer to the current port status bits and
- port status change bits.
-
- @retval EFI_SUCCESS The status of the USB root hub port specified by PortNumber
- was returned in PortStatus.
- @retval EFI_INVALID_PARAMETER Port number not valid
-**/
-
-
-EFI_STATUS
-EFIAPI
-OhciGetRootHubPortStatus (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 PortNumber,
- OUT EFI_USB_PORT_STATUS *PortStatus
- );
-
-/**
-
- Sets a feature for the specified root hub port.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL.
- @param PortNumber Specifies the root hub port whose feature
- is requested to be set.
- @param PortFeature Indicates the feature selector associated
- with the feature set request.
-
- @retval EFI_SUCCESS The feature specified by PortFeature was set for the
- USB root hub port specified by PortNumber.
- @retval EFI_DEVICE_ERROR Set feature failed because of hardware issue
- @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
-**/
-EFI_STATUS
-EFIAPI
-OhciSetRootHubPortFeature (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 PortNumber,
- IN EFI_USB_PORT_FEATURE PortFeature
- );
-/**
-
- Clears a feature for the specified root hub port.
-
- @param This A pointer to the EFI_USB_HC_PROTOCOL instance.
- @param PortNumber Specifies the root hub port whose feature
- is requested to be cleared.
- @param PortFeature Indicates the feature selector associated with the
- feature clear request.
-
- @retval EFI_SUCCESS The feature specified by PortFeature was cleared for the
- USB root hub port specified by PortNumber.
- @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.
- @retval EFI_DEVICE_ERROR Some error happened when clearing feature
-**/
-EFI_STATUS
-EFIAPI
-OhciClearRootHubPortFeature (
- IN EFI_USB_HC_PROTOCOL *This,
- IN UINT8 PortNumber,
- IN EFI_USB_PORT_FEATURE PortFeature
- );
-
-
-/**
- Test to see if this driver supports ControllerHandle. Any
- ControllerHandle that has UsbHcProtocol installed will be supported.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to test.
- @param RemainingDevicePath Not used.
-
- @return EFI_SUCCESS This driver supports this device.
- @return EFI_UNSUPPORTED This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-
-OHCIDriverBindingSupported (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Starting the Usb OHCI Driver.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to test.
- @param RemainingDevicePath Not used.
-
- @retval EFI_SUCCESS This driver supports this device.
- @retval EFI_UNSUPPORTED This driver does not support this device.
- @retval EFI_DEVICE_ERROR This driver cannot be started due to device Error.
- EFI_OUT_OF_RESOURCES- Failed due to resource shortage.
-
-**/
-EFI_STATUS
-EFIAPI
-OHCIDriverBindingStart (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
- );
-
-/**
- Stop this driver on ControllerHandle. Support stopping any child handles
- created by this driver.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on.
- @param NumberOfChildren Number of Children in the ChildHandleBuffer.
- @param ChildHandleBuffer List of handles for the children we need to stop.
-
- @return EFI_SUCCESS
- @return others
-
-**/
-EFI_STATUS
-EFIAPI
-OHCIDriverBindingStop (
- IN EFI_DRIVER_BINDING_PROTOCOL *This,
- IN EFI_HANDLE Controller,
- IN UINTN NumberOfChildren,
- IN EFI_HANDLE *ChildHandleBuffer
- );
-
-#endif
|