diff options
Diffstat (limited to 'QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/UsbHcMem.c')
-rw-r--r-- | QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/UsbHcMem.c | 566 |
1 files changed, 566 insertions, 0 deletions
diff --git a/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/UsbHcMem.c b/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/UsbHcMem.c new file mode 100644 index 0000000000..dd42938dfd --- /dev/null +++ b/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Dxe/UsbHcMem.c @@ -0,0 +1,566 @@ +/** @file
+Routine procedures for memory allocate/free.
+
+Copyright (c) 2013-2015 Intel Corporation.
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include "Ohci.h"
+
+
+/**
+ Allocate a block of memory to be used by the buffer pool.
+
+ @param Pool The buffer pool to allocate memory for.
+ @param Pages How many pages to allocate.
+
+ @return The allocated memory block or NULL if failed.
+
+**/
+USBHC_MEM_BLOCK *
+UsbHcAllocMemBlock (
+ IN USBHC_MEM_POOL *Pool,
+ IN UINTN Pages
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ VOID *BufHost;
+ VOID *Mapping;
+ EFI_PHYSICAL_ADDRESS MappedAddr;
+ UINTN Bytes;
+ EFI_STATUS Status;
+
+ PciIo = Pool->PciIo;
+
+ Block = AllocateZeroPool (sizeof (USBHC_MEM_BLOCK));
+ if (Block == NULL) {
+ return NULL;
+ }
+
+ //
+ // each bit in the bit array represents USBHC_MEM_UNIT
+ // bytes of memory in the memory block.
+ //
+ ASSERT (USBHC_MEM_UNIT * 8 <= EFI_PAGE_SIZE);
+
+ Block->BufLen = EFI_PAGES_TO_SIZE (Pages);
+ Block->BitsLen = Block->BufLen / (USBHC_MEM_UNIT * 8);
+ Block->Bits = AllocateZeroPool (Block->BitsLen);
+
+ if (Block->Bits == NULL) {
+ gBS->FreePool (Block);
+ return NULL;
+ }
+
+ //
+ // Allocate the number of Pages of memory, then map it for
+ // bus master read and write.
+ //
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ Pages,
+ &BufHost,
+ 0
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto FREE_BITARRAY;
+ }
+
+ Bytes = EFI_PAGES_TO_SIZE (Pages);
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ BufHost,
+ &Bytes,
+ &MappedAddr,
+ &Mapping
+ );
+
+ if (EFI_ERROR (Status) || (Bytes != EFI_PAGES_TO_SIZE (Pages))) {
+ goto FREE_BUFFER;
+ }
+
+ //
+ // Check whether the data structure used by the host controller
+ // should be restricted into the same 4G
+ //
+ if (Pool->Check4G && (Pool->Which4G != USB_HC_HIGH_32BIT (MappedAddr))) {
+ PciIo->Unmap (PciIo, Mapping);
+ goto FREE_BUFFER;
+ }
+
+ Block->BufHost = BufHost;
+ Block->Buf = (UINT8 *) ((UINTN) MappedAddr);
+ Block->Mapping = Mapping;
+
+ return Block;
+
+FREE_BUFFER:
+ PciIo->FreeBuffer (PciIo, Pages, BufHost);
+
+FREE_BITARRAY:
+ gBS->FreePool (Block->Bits);
+ gBS->FreePool (Block);
+ return NULL;
+}
+
+
+/**
+ Free the memory block from the memory pool.
+
+ @param Pool The memory pool to free the block from.
+ @param Block The memory block to free.
+
+**/
+VOID
+UsbHcFreeMemBlock (
+ IN USBHC_MEM_POOL *Pool,
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ ASSERT ((Pool != NULL) && (Block != NULL));
+
+ PciIo = Pool->PciIo;
+
+ //
+ // Unmap the common buffer then free the structures
+ //
+ PciIo->Unmap (PciIo, Block->Mapping);
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (Block->BufLen), Block->BufHost);
+
+ gBS->FreePool (Block->Bits);
+ gBS->FreePool (Block);
+}
+
+
+/**
+ Alloc some memory from the block.
+
+ @param Block The memory block to allocate memory from.
+ @param Units Number of memory units to allocate.
+
+ @return The pointer to the allocated memory. If couldn't allocate the needed memory,
+ the return value is NULL.
+
+**/
+VOID *
+UsbHcAllocMemFromBlock (
+ IN USBHC_MEM_BLOCK *Block,
+ IN UINTN Units
+ )
+{
+ UINTN Byte;
+ UINT8 Bit;
+ UINTN StartByte;
+ UINT8 StartBit;
+ UINTN Available;
+ UINTN Count;
+
+ ASSERT ((Block != 0) && (Units != 0));
+
+ StartByte = 0;
+ StartBit = 0;
+ Available = 0;
+
+ for (Byte = 0, Bit = 0; Byte < Block->BitsLen;) {
+ //
+ // If current bit is zero, the corresponding memory unit is
+ // available, otherwise we need to restart our searching.
+ // Available counts the consective number of zero bit.
+ //
+ if (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit)) {
+ Available++;
+
+ if (Available >= Units) {
+ break;
+ }
+
+ NEXT_BIT (Byte, Bit);
+
+ } else {
+ NEXT_BIT (Byte, Bit);
+
+ Available = 0;
+ StartByte = Byte;
+ StartBit = Bit;
+ }
+ }
+
+ if (Available < Units) {
+ return NULL;
+ }
+
+ //
+ // Mark the memory as allocated
+ //
+ Byte = StartByte;
+ Bit = StartBit;
+
+ for (Count = 0; Count < Units; Count++) {
+ ASSERT (!USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
+
+ Block->Bits[Byte] = (UINT8) (Block->Bits[Byte] | USB_HC_BIT (Bit));
+ NEXT_BIT (Byte, Bit);
+ }
+
+ return Block->BufHost + (StartByte * 8 + StartBit) * USBHC_MEM_UNIT;
+}
+
+/**
+ Calculate the corresponding pci bus address according to the Mem parameter.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The pointer to host memory.
+ @param Size The size of the memory region.
+
+ @return the pci memory address
+**/
+EFI_PHYSICAL_ADDRESS
+UsbHcGetPciAddressForHostMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ UINTN AllocSize;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ UINTN Offset;
+
+ Head = Pool->Head;
+ AllocSize = USBHC_MEM_ROUND (Size);
+
+ if (Mem == NULL) {
+ return 0;
+ }
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ //
+ // scan the memory block list for the memory block that
+ // completely contains the allocated memory.
+ //
+ if ((Block->BufHost <= (UINT8 *) Mem) && (((UINT8 *) Mem + AllocSize) <= (Block->BufHost + Block->BufLen))) {
+ break;
+ }
+ }
+
+ ASSERT ((Block != NULL));
+ //
+ // calculate the pci memory address for host memory address.
+ //
+ Offset = (UINT8 *)Mem - Block->BufHost;
+ PhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN) (Block->Buf + Offset);
+ return PhyAddr;
+}
+
+
+/**
+ Insert the memory block to the pool's list of the blocks.
+
+ @param Head The head of the memory pool's block list.
+ @param Block The memory block to insert.
+
+**/
+VOID
+UsbHcInsertMemBlockToPool (
+ IN USBHC_MEM_BLOCK *Head,
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ ASSERT ((Head != NULL) && (Block != NULL));
+ Block->Next = Head->Next;
+ Head->Next = Block;
+}
+
+
+/**
+ Is the memory block empty?
+
+ @param Block The memory block to check.
+
+ @retval TRUE The memory block is empty.
+ @retval FALSE The memory block isn't empty.
+
+**/
+BOOLEAN
+UsbHcIsMemBlockEmpty (
+ IN USBHC_MEM_BLOCK *Block
+ )
+{
+ UINTN Index;
+
+ for (Index = 0; Index < Block->BitsLen; Index++) {
+ if (Block->Bits[Index] != 0) {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+}
+
+
+/**
+ Unlink the memory block from the pool's list.
+
+ @param Head The block list head of the memory's pool.
+ @param BlockToUnlink The memory block to unlink.
+
+**/
+VOID
+UsbHcUnlinkMemBlock (
+ IN USBHC_MEM_BLOCK *Head,
+ IN USBHC_MEM_BLOCK *BlockToUnlink
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+
+ ASSERT ((Head != NULL) && (BlockToUnlink != NULL));
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ if (Block->Next == BlockToUnlink) {
+ Block->Next = BlockToUnlink->Next;
+ BlockToUnlink->Next = NULL;
+ break;
+ }
+ }
+}
+
+
+/**
+ Initialize the memory management pool for the host controller.
+
+ @param PciIo The PciIo that can be used to access the host controller.
+ @param Check4G Whether the host controller requires allocated memory
+ from one 4G address space.
+ @param Which4G The 4G memory area each memory allocated should be from.
+
+ @retval EFI_SUCCESS The memory pool is initialized.
+ @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool.
+
+**/
+USBHC_MEM_POOL *
+UsbHcInitMemPool (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN BOOLEAN Check4G,
+ IN UINT32 Which4G
+ )
+{
+ USBHC_MEM_POOL *Pool;
+
+ Pool = AllocatePool (sizeof (USBHC_MEM_POOL));
+
+ if (Pool == NULL) {
+ return Pool;
+ }
+
+ Pool->PciIo = PciIo;
+ Pool->Check4G = Check4G;
+ Pool->Which4G = Which4G;
+ Pool->Head = UsbHcAllocMemBlock (Pool, USBHC_MEM_DEFAULT_PAGES);
+
+ if (Pool->Head == NULL) {
+ gBS->FreePool (Pool);
+ Pool = NULL;
+ }
+
+ return Pool;
+}
+
+
+/**
+ Release the memory management pool.
+
+ @param Pool The USB memory pool to free.
+
+ @retval EFI_SUCCESS The memory pool is freed.
+ @retval EFI_DEVICE_ERROR Failed to free the memory pool.
+
+**/
+EFI_STATUS
+UsbHcFreeMemPool (
+ IN USBHC_MEM_POOL *Pool
+ )
+{
+ USBHC_MEM_BLOCK *Block;
+
+ ASSERT (Pool->Head != NULL);
+
+ //
+ // Unlink all the memory blocks from the pool, then free them.
+ // UsbHcUnlinkMemBlock can't be used to unlink and free the
+ // first block.
+ //
+ for (Block = Pool->Head->Next; Block != NULL; Block = Pool->Head->Next) {
+ UsbHcUnlinkMemBlock (Pool->Head, Block);
+ UsbHcFreeMemBlock (Pool, Block);
+ }
+
+ UsbHcFreeMemBlock (Pool, Pool->Head);
+ gBS->FreePool (Pool);
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Allocate some memory from the host controller's memory pool
+ which can be used to communicate with host controller.
+
+ @param Pool The host controller's memory pool.
+ @param Size Size of the memory to allocate.
+
+ @return The allocated memory or NULL.
+
+**/
+VOID *
+UsbHcAllocateMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ USBHC_MEM_BLOCK *NewBlock;
+ VOID *Mem;
+ UINTN AllocSize;
+ UINTN Pages;
+
+ Mem = NULL;
+ AllocSize = USBHC_MEM_ROUND (Size);
+ Head = Pool->Head;
+ ASSERT (Head != NULL);
+
+ //
+ // First check whether current memory blocks can satisfy the allocation.
+ //
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ Mem = UsbHcAllocMemFromBlock (Block, AllocSize / USBHC_MEM_UNIT);
+
+ if (Mem != NULL) {
+ ZeroMem (Mem, Size);
+ break;
+ }
+ }
+
+ if (Mem != NULL) {
+ return Mem;
+ }
+
+ //
+ // Create a new memory block if there is not enough memory
+ // in the pool. If the allocation size is larger than the
+ // default page number, just allocate a large enough memory
+ // block. Otherwise allocate default pages.
+ //
+ if (AllocSize > EFI_PAGES_TO_SIZE (USBHC_MEM_DEFAULT_PAGES)) {
+ Pages = EFI_SIZE_TO_PAGES (AllocSize) + 1;
+ } else {
+ Pages = USBHC_MEM_DEFAULT_PAGES;
+ }
+
+ NewBlock = UsbHcAllocMemBlock (Pool, Pages);
+
+ if (NewBlock == NULL) {
+ DEBUG ((EFI_D_INFO, "UsbHcAllocateMem: failed to allocate block\n"));
+ return NULL;
+ }
+
+ //
+ // Add the new memory block to the pool, then allocate memory from it
+ //
+ UsbHcInsertMemBlockToPool (Head, NewBlock);
+ Mem = UsbHcAllocMemFromBlock (NewBlock, AllocSize / USBHC_MEM_UNIT);
+
+ if (Mem != NULL) {
+ ZeroMem (Mem, Size);
+ }
+
+ return Mem;
+}
+
+
+/**
+ Free the allocated memory back to the memory pool.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The memory to free.
+ @param Size The size of the memory to free.
+
+**/
+VOID
+UsbHcFreeMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ UINT8 *ToFree;
+ UINTN AllocSize;
+ UINTN Byte;
+ UINTN Bit;
+ UINTN Count;
+
+ Head = Pool->Head;
+ AllocSize = USBHC_MEM_ROUND (Size);
+ ToFree = (UINT8 *) Mem;
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ //
+ // scan the memory block list for the memory block that
+ // completely contains the memory to free.
+ //
+ if ((Block->BufHost <= ToFree) && ((ToFree + AllocSize) <= (Block->BufHost + Block->BufLen))) {
+ //
+ // compute the start byte and bit in the bit array
+ //
+ Byte = ((ToFree - Block->BufHost) / USBHC_MEM_UNIT) / 8;
+ Bit = ((ToFree - Block->BufHost) / USBHC_MEM_UNIT) % 8;
+
+ //
+ // reset associated bits in bit arry
+ //
+ for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {
+ ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));
+
+ Block->Bits[Byte] = (UINT8) (Block->Bits[Byte] ^ USB_HC_BIT (Bit));
+ NEXT_BIT (Byte, Bit);
+ }
+
+ break;
+ }
+ }
+
+ //
+ // If Block == NULL, it means that the current memory isn't
+ // in the host controller's pool. This is critical because
+ // the caller has passed in a wrong memory point
+ //
+ ASSERT (Block != NULL);
+
+ //
+ // Release the current memory block if it is empty and not the head
+ //
+ if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
+ UsbHcUnlinkMemBlock (Head, Block);
+ UsbHcFreeMemBlock (Pool, Block);
+ }
+
+ return ;
+}
|