diff options
Diffstat (limited to 'SecurityPkg')
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c | 1282 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h | 412 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c | 414 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h | 4 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c | 1823 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h | 327 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h | 815 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h | 45 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf | 6 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c | 702 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h | 97 | ||||
-rw-r--r-- | SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf | 12 |
12 files changed, 274 insertions, 5665 deletions
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c deleted file mode 100644 index 0c4edd5346..0000000000 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c +++ /dev/null @@ -1,1282 +0,0 @@ -/** @file
- This driver is used for Opal Password Feature support at AHCI mode.
-
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include "OpalPasswordPei.h"
-
-/**
- Start command for give slot on specific port.
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param CommandSlot The number of CommandSlot.
- @param Timeout The timeout Value of start.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- );
-
-/**
- Stop command running for giving port
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param Timeout The timeout Value of stop.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT64 Timeout
- );
-
-/**
- Read AHCI Operation register.
-
- @param AhciBar AHCI bar address.
- @param Offset The operation register offset.
-
- @return The register content read.
-
-**/
-UINT32
-EFIAPI
-AhciReadReg (
- IN UINT32 AhciBar,
- IN UINT32 Offset
- )
-{
- UINT32 Data;
-
- Data = 0;
-
- Data = MmioRead32 (AhciBar + Offset);
-
- return Data;
-}
-
-/**
- Write AHCI Operation register.
-
- @param AhciBar AHCI bar address.
- @param Offset The operation register offset.
- @param Data The Data used to write down.
-
-**/
-VOID
-EFIAPI
-AhciWriteReg (
- IN UINT32 AhciBar,
- IN UINT32 Offset,
- IN UINT32 Data
- )
-{
- MmioWrite32 (AhciBar + Offset, Data);
-
- return ;
-}
-
-/**
- Do AND operation with the Value of AHCI Operation register.
-
- @param AhciBar AHCI bar address.
- @param Offset The operation register offset.
- @param AndData The Data used to do AND operation.
-
-**/
-VOID
-EFIAPI
-AhciAndReg (
- IN UINT32 AhciBar,
- IN UINT32 Offset,
- IN UINT32 AndData
- )
-{
- UINT32 Data;
-
- Data = AhciReadReg (AhciBar, Offset);
-
- Data &= AndData;
-
- AhciWriteReg (AhciBar, Offset, Data);
-}
-
-/**
- Do OR operation with the Value of AHCI Operation register.
-
- @param AhciBar AHCI bar address.
- @param Offset The operation register offset.
- @param OrData The Data used to do OR operation.
-
-**/
-VOID
-EFIAPI
-AhciOrReg (
- IN UINT32 AhciBar,
- IN UINT32 Offset,
- IN UINT32 OrData
- )
-{
- UINT32 Data;
-
- Data = AhciReadReg (AhciBar, Offset);
-
- Data |= OrData;
-
- AhciWriteReg (AhciBar, Offset, Data);
-}
-
-/**
- Wait for memory set to the test Value.
-
- @param AhciBar AHCI bar address.
- @param Offset The memory offset to test.
- @param MaskValue The mask Value of memory.
- @param TestValue The test Value of memory.
- @param Timeout The time out Value for wait memory set.
-
- @retval EFI_DEVICE_ERROR The memory is not set.
- @retval EFI_TIMEOUT The memory setting is time out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMmioSet (
- IN UINT32 AhciBar,
- IN UINT32 Offset,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT32 Delay;
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
-
- do {
- Value = AhciReadReg (AhciBar, Offset) & MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-/**
- Wait for the Value of the specified system memory set to the test Value.
-
- @param Address The system memory address to test.
- @param MaskValue The mask Value of memory.
- @param TestValue The test Value of memory.
- @param Timeout The time out Value for wait memory set, uses 100ns as a unit.
-
- @retval EFI_TIMEOUT The system memory setting is time out.
- @retval EFI_SUCCESS The system memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMemSet (
- IN EFI_PHYSICAL_ADDRESS Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT32 Delay;
-
- Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
-
- do {
- //
- // Access sytem memory to see if the Value is the tested one.
- //
- // The system memory pointed by Address will be updated by the
- // SATA Host Controller, "volatile" is introduced to prevent
- // compiler from optimizing the access to the memory address
- // to only read once.
- //
- Value = *(volatile UINT32 *) (UINTN) Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-
-/**
- Check the memory status to the test Value.
-
- @param[in] Address The memory address to test.
- @param[in] MaskValue The mask Value of memory.
- @param[in] TestValue The test Value of memory.
- @param[in, out] RetryTimes The retry times Value for waitting memory set. If 0, then just try once.
-
- @retval EFI_NOTREADY The memory is not set.
- @retval EFI_TIMEOUT The memory setting retry times out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciCheckMemSet (
- IN UINTN Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN OUT UINTN *RetryTimes OPTIONAL
- )
-{
- UINT32 Value;
-
- if (RetryTimes != NULL) {
- (*RetryTimes)--;
- }
-
- Value = *(volatile UINT32 *) Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- if ((RetryTimes != NULL) && (*RetryTimes == 0)) {
- return EFI_TIMEOUT;
- } else {
- return EFI_NOT_READY;
- }
-}
-
-/**
- Clear the port interrupt and error status. It will also clear
- HBA interrupt status.
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
-
-**/
-VOID
-EFIAPI
-AhciClearPortStatus (
- IN UINT32 AhciBar,
- IN UINT8 Port
- )
-{
- UINT32 Offset;
-
- //
- // Clear any error status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
-
- //
- // Clear any port interrupt status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
-
- //
- // Clear any HBA interrupt status
- //
- AhciWriteReg (AhciBar, EFI_AHCI_IS_OFFSET, AhciReadReg (AhciBar, EFI_AHCI_IS_OFFSET));
-}
-
-/**
- Enable the FIS running for giving port.
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param Timeout The timeout Value of enabling FIS.
-
- @retval EFI_DEVICE_ERROR The FIS enable setting fails.
- @retval EFI_TIMEOUT The FIS enable setting is time out.
- @retval EFI_SUCCESS The FIS enable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciEnableFisReceive (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_FRE);
-
- return AhciWaitMmioSet (
- AhciBar,
- Offset,
- EFI_AHCI_PORT_CMD_FR,
- EFI_AHCI_PORT_CMD_FR,
- Timeout
- );
-}
-
-/**
- Disable the FIS running for giving port.
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param Timeout The timeout Value of disabling FIS.
-
- @retval EFI_DEVICE_ERROR The FIS disable setting fails.
- @retval EFI_TIMEOUT The FIS disable setting is time out.
- @retval EFI_UNSUPPORTED The port is in running state.
- @retval EFI_SUCCESS The FIS disable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDisableFisReceive (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (AhciBar, Offset);
-
- //
- // Before disabling Fis receive, the DMA engine of the port should NOT be in running status.
- //
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Check if the Fis receive DMA engine for the port is running.
- //
- if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
- return EFI_SUCCESS;
- }
-
- AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
-
- return AhciWaitMmioSet (
- AhciBar,
- Offset,
- EFI_AHCI_PORT_CMD_FR,
- 0,
- Timeout
- );
-}
-
-/**
- Build the command list, command table and prepare the fis receiver.
-
- @param AhciContext The pointer to the AHCI_CONTEXT.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param CommandFis The control fis will be used for the transfer.
- @param CommandList The command list will be used for the transfer.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param CommandSlotNumber The command slot will be used for the transfer.
- @param DataPhysicalAddr The pointer to the Data Buffer pci bus master address.
- @param DataLength The Data count to be transferred.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommand (
- IN AHCI_CONTEXT *AhciContext,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_COMMAND_FIS *CommandFis,
- IN EFI_AHCI_COMMAND_LIST *CommandList,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN UINT8 CommandSlotNumber,
- IN OUT VOID *DataPhysicalAddr,
- IN UINT64 DataLength
- )
-{
- EFI_AHCI_REGISTERS *AhciRegisters;
- UINT32 AhciBar;
- UINT64 BaseAddr;
- UINT64 PrdtNumber;
- UINTN RemainedData;
- UINTN MemAddr;
- DATA_64 Data64;
- UINT32 Offset;
-
- AhciRegisters = &AhciContext->AhciRegisters;
- AhciBar = AhciContext->AhciBar;
-
- //
- // Filling the PRDT
- //
- PrdtNumber = DivU64x32 (DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1, EFI_AHCI_MAX_DATA_PER_PRDT);
-
- //
- // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB Data block.
- // It also limits that the maximum amount of the PRDT entry in the command table
- // is 65535.
- //
- ASSERT (PrdtNumber <= 1);
-
- Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis);
-
- BaseAddr = Data64.Uint64;
-
- ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
-
- ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE));
-
- CommandFis->AhciCFisPmNum = PortMultiplier;
-
- CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- if (AtapiCommand != NULL) {
- CopyMem (
- &AhciRegisters->AhciCommandTable->AtapiCmd,
- AtapiCommand,
- AtapiCommandLength
- );
-
- CommandList->AhciCmdA = 1;
- CommandList->AhciCmdP = 1;
-
- AhciOrReg (AhciBar, Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- } else {
- AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- }
-
- RemainedData = (UINTN) DataLength;
- MemAddr = (UINTN) DataPhysicalAddr;
- CommandList->AhciCmdPrdtl = (UINT32)PrdtNumber;
-
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbc = (UINT32)RemainedData - 1;
-
- Data64.Uint64 = (UINT64)MemAddr;
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbau = Data64.Uint32.Upper32;
-
- //
- // Set the last PRDT to Interrupt On Complete
- //
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtIoc = 1;
-
- CopyMem (
- (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN) CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
- CommandList,
- sizeof (EFI_AHCI_COMMAND_LIST)
- );
-
- Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTable;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier;
-
-}
-
-/**
- Buid a command FIS.
-
- @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS Data structure.
- @param AtaCommandBlock A pointer to the AhciBuildCommandFis Data structure.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommandFis (
- IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
- )
-{
- ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
- //
- // Indicator it's a command
- //
- CmdFis->AhciCFisCmdInd = 0x1;
- CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
-
- CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
- CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
-
- CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
- CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp;
-
- CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
- CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
-
- CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
- CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
-
- CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
- CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
-
- CmdFis->AhciCFisDevHead = (UINT8) (AtaCommandBlock->AtaDeviceHead | 0xE0);
-}
-
-/**
- Start a PIO Data transfer on specific port.
-
- @param AhciContext The pointer to the AHCI_CONTEXT.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param Read The transfer direction.
- @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
- @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
- @param MemoryAddr The pointer to the Data Buffer.
- @param DataCount The Data count to be transferred.
- @param Timeout The timeout Value of non Data transfer.
-
- @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO Data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN AHCI_CONTEXT *AhciContext,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- EFI_AHCI_REGISTERS *AhciRegisters;
- UINT32 AhciBar;
- UINT32 FisBaseAddr;
- UINT32 Offset;
- UINT32 Delay;
- EFI_AHCI_COMMAND_FIS CFis;
- EFI_AHCI_COMMAND_LIST CmdList;
- UINT32 PortTfd;
- UINT32 PrdCount;
- UINT32 OldRfisLo;
- UINT32 OldRfisHi;
- UINT32 OldCmdListLo;
- UINT32 OldCmdListHi;
-
- AhciRegisters = &AhciContext->AhciRegisters;
- AhciBar = AhciContext->AhciBar;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- OldRfisLo = AhciReadReg (AhciBar, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- OldRfisHi = AhciReadReg (AhciBar, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- AhciWriteReg (AhciBar, Offset, 0);
-
- //
- // Single task envrionment, we only use one command table for all port
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- OldCmdListLo = AhciReadReg (AhciBar, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- OldCmdListHi = AhciReadReg (AhciBar, Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- AhciWriteReg (AhciBar, Offset, 0);
-
- //
- // Package read needed
- //
- AhciBuildCommandFis (&CFis, AtaCommandBlock);
-
- ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
-
- CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
- CmdList.AhciCmdW = Read ? 0 : 1;
-
- AhciBuildCommand (
- AhciContext,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- MemoryAddr,
- DataCount
- );
-
- Status = AhciStartCommand (
- AhciBar,
- Port,
- 0,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
-
- //
- // Checking the status and wait the driver sending Data
- //
- FisBaseAddr = (UINT32)(UINTN)AhciRegisters->AhciRFis;
- if (Read && (AtapiCommand == 0)) {
- //
- // Wait device sends the PIO setup fis before Data transfer
- //
- Status = EFI_TIMEOUT;
- Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
- do {
- Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
-
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_PIO_SETUP, 0);
- if (!EFI_ERROR (Status)) {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
- //
- // PxTFD will be updated if there is a D2H or SetupFIS received.
- // For PIO IN transfer, D2H means a device error. Therefore we only need to check the TFD after receiving a SetupFIS.
- //
- if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- PrdCount = *(volatile UINT32 *) (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
- if (PrdCount == DataCount) {
- break;
- }
- }
-
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, 0);
- if (!EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay(100);
-
- Delay--;
- } while (Delay > 0);
- } else {
- //
- // Wait for D2H Fis is received
- //
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
- Status = AhciWaitMemSet (
- Offset,
- EFI_AHCI_FIS_TYPE_MASK,
- EFI_AHCI_FIS_REGISTER_D2H,
- Timeout
- );
-
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
- if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
- Status = EFI_DEVICE_ERROR;
- }
- }
-
-Exit:
- AhciStopCommand (
- AhciBar,
- Port,
- Timeout
- );
-
- AhciDisableFisReceive (
- AhciBar,
- Port,
- Timeout
- );
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (AhciBar, Offset, OldRfisLo);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- AhciWriteReg (AhciBar, Offset, OldRfisHi);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (AhciBar, Offset, OldCmdListLo);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- AhciWriteReg (AhciBar, Offset, OldCmdListHi);
-
- return Status;
-}
-
-/**
- Stop command running for giving port
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param Timeout The timeout Value of stop.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (AhciBar, Offset);
-
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
- return EFI_SUCCESS;
- }
-
- if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
- AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
- }
-
- return AhciWaitMmioSet (
- AhciBar,
- Offset,
- EFI_AHCI_PORT_CMD_CR,
- 0,
- Timeout
- );
-}
-
-/**
- Start command for give slot on specific port.
-
- @param AhciBar AHCI bar address.
- @param Port The number of port.
- @param CommandSlot The number of CommandSlot.
- @param Timeout The timeout Value of start.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN UINT32 AhciBar,
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- )
-{
- UINT32 CmdSlotBit;
- EFI_STATUS Status;
- UINT32 PortStatus;
- UINT32 StartCmd;
- UINT32 PortTfd;
- UINT32 Offset;
- UINT32 Capability;
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg(AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
-
- CmdSlotBit = (UINT32) (1 << CommandSlot);
-
- AhciClearPortStatus (
- AhciBar,
- Port
- );
-
- Status = AhciEnableFisReceive (
- AhciBar,
- Port,
- Timeout
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- PortStatus = AhciReadReg (AhciBar, Offset);
-
- StartCmd = 0;
- if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
- StartCmd = AhciReadReg (AhciBar, Offset);
- StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
- StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (AhciBar, Offset);
-
- if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
- if ((Capability & BIT24) != 0) {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_COL);
-
- AhciWaitMmioSet (
- AhciBar,
- Offset,
- EFI_AHCI_PORT_CMD_COL,
- 0,
- Timeout
- );
- }
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
-
- //
- // Setting the command
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SACT;
- AhciAndReg (AhciBar, Offset, 0);
- AhciOrReg (AhciBar, Offset, CmdSlotBit);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI;
- AhciAndReg (AhciBar, Offset, 0);
- AhciOrReg (AhciBar, Offset, CmdSlotBit);
- return EFI_SUCCESS;
-}
-
-
-/**
- Do AHCI HBA reset.
-
- @param[in] AhciBar AHCI bar address.
- @param[in] Timeout The timeout Value of reset.
-
- @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset.
- @retval EFI_TIMEOUT The reset operation is time out.
- @retval EFI_SUCCESS AHCI controller is reset successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciReset (
- IN UINT32 AhciBar,
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT32 Value;
- UINT32 Capability;
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
-
- //
- // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
- //
- if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
- AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
-
- do {
- Value = AhciReadReg(AhciBar, EFI_AHCI_GHC_OFFSET);
- if ((Value & EFI_AHCI_GHC_RESET) == 0) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay(100);
-
- Delay--;
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-
-
-}
-
-/**
- Allocate transfer-related data struct which is used at AHCI mode.
-
- @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
-
- @retval EFI_OUT_OF_RESOURCE No enough resource.
- @retval EFI_SUCCESS Successful to allocate resource.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciAllocateResource (
- IN OUT AHCI_CONTEXT *AhciContext
- )
-{
- EFI_STATUS Status;
- EFI_AHCI_REGISTERS *AhciRegisters;
- EFI_PHYSICAL_ADDRESS DeviceAddress;
- VOID *Base;
- VOID *Mapping;
-
- AhciRegisters = &AhciContext->AhciRegisters;
-
- //
- // Allocate resources required by AHCI host controller.
- //
- Status = IoMmuAllocateBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- &Base,
- &DeviceAddress,
- &Mapping
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
- AhciRegisters->AhciRFisMapping = Mapping;
- AhciRegisters->AhciRFis = Base;
- ZeroMem (AhciRegisters->AhciRFis, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
-
- Status = IoMmuAllocateBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
- &Base,
- &DeviceAddress,
- &Mapping
- );
- if (EFI_ERROR (Status)) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- AhciRegisters->AhciRFis,
- AhciRegisters->AhciRFisMapping
- );
- AhciRegisters->AhciRFis = NULL;
- return EFI_OUT_OF_RESOURCES;
- }
- ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
- AhciRegisters->AhciCmdListMapping = Mapping;
- AhciRegisters->AhciCmdList = Base;
- ZeroMem (AhciRegisters->AhciCmdList, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
-
- Status = IoMmuAllocateBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
- &Base,
- &DeviceAddress,
- &Mapping
- );
- if (EFI_ERROR (Status)) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
- AhciRegisters->AhciCmdList,
- AhciRegisters->AhciCmdListMapping
- );
- AhciRegisters->AhciCmdList = NULL;
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- AhciRegisters->AhciRFis,
- AhciRegisters->AhciRFisMapping
- );
- AhciRegisters->AhciRFis = NULL;
- return EFI_OUT_OF_RESOURCES;
- }
- ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
- AhciRegisters->AhciCommandTableMapping = Mapping;
- AhciRegisters->AhciCommandTable = Base;
- ZeroMem (AhciRegisters->AhciCommandTable, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
-
- //
- // Allocate resources for data transfer.
- //
- Status = IoMmuAllocateBuffer (
- EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
- &Base,
- &DeviceAddress,
- &Mapping
- );
- if (EFI_ERROR (Status)) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- AhciRegisters->AhciCommandTable,
- AhciRegisters->AhciCommandTableMapping
- );
- AhciRegisters->AhciCommandTable = NULL;
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
- AhciRegisters->AhciCmdList,
- AhciRegisters->AhciCmdListMapping
- );
- AhciRegisters->AhciCmdList = NULL;
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- AhciRegisters->AhciRFis,
- AhciRegisters->AhciRFisMapping
- );
- AhciRegisters->AhciRFis = NULL;
- return EFI_OUT_OF_RESOURCES;
- }
- ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
- AhciContext->BufferMapping = Mapping;
- AhciContext->Buffer = Base;
- ZeroMem (AhciContext->Buffer, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (HDD_PAYLOAD));
-
- DEBUG ((
- DEBUG_INFO,
- "%a() AhciContext 0x%x 0x%x 0x%x 0x%x\n",
- __FUNCTION__,
- AhciContext->Buffer,
- AhciRegisters->AhciRFis,
- AhciRegisters->AhciCmdList,
- AhciRegisters->AhciCommandTable
- ));
- return EFI_SUCCESS;
-}
-
-/**
- Free allocated transfer-related data struct which is used at AHCI mode.
-
- @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
-
-**/
-VOID
-EFIAPI
-AhciFreeResource (
- IN OUT AHCI_CONTEXT *AhciContext
- )
-{
- EFI_AHCI_REGISTERS *AhciRegisters;
-
- AhciRegisters = &AhciContext->AhciRegisters;
-
- if (AhciContext->Buffer != NULL) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
- AhciContext->Buffer,
- AhciContext->BufferMapping
- );
- AhciContext->Buffer = NULL;
- }
-
- if (AhciRegisters->AhciCommandTable != NULL) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
- AhciRegisters->AhciCommandTable,
- AhciRegisters->AhciCommandTableMapping
- );
- AhciRegisters->AhciCommandTable = NULL;
- }
-
- if (AhciRegisters->AhciCmdList != NULL) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
- AhciRegisters->AhciCmdList,
- AhciRegisters->AhciCmdListMapping
- );
- AhciRegisters->AhciCmdList = NULL;
- }
-
- if (AhciRegisters->AhciRFis != NULL) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- AhciRegisters->AhciRFis,
- AhciRegisters->AhciRFisMapping
- );
- AhciRegisters->AhciRFis = NULL;
- }
-}
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] AhciContext The pointer to the AHCI_CONTEXT.
- @param[in] Port The port number to do initialization.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialize (
- IN AHCI_CONTEXT *AhciContext,
- IN UINT8 Port
- )
-{
- EFI_STATUS Status;
- EFI_AHCI_REGISTERS *AhciRegisters;
- UINT32 AhciBar;
- UINT32 Capability;
- UINT32 Offset;
- UINT32 Data;
- UINT32 PhyDetectDelay;
-
- AhciRegisters = &AhciContext->AhciRegisters;
- AhciBar = AhciContext->AhciBar;
-
- Status = AhciReset (AhciBar, ATA_TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
-
- //
- // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
- //
- if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
- AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
-
- //
- // Single task envrionment, we only use one command table for all port
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (AhciBar, Offset);
- if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_POD);
- }
-
- if ((Capability & BIT27) != 0) {
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_SUD);
- }
-
- //
- // Disable aggressive power management.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
- AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
- //
- // Disable the reporting of the corresponding interrupt to system software.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE;
- AhciAndReg (AhciBar, Offset, 0);
-
- Status = AhciEnableFisReceive (
- AhciBar,
- Port,
- 5000000
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ
- // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec.
- //
- PhyDetectDelay = 16 * 1000;
- do {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- if (AhciReadReg(AhciBar, Offset) != 0) {
- AhciWriteReg (AhciBar, Offset, AhciReadReg(AhciBar, Offset));
- }
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
-
- Data = AhciReadReg (AhciBar, Offset) & EFI_AHCI_PORT_TFD_MASK;
- if (Data == 0) {
- break;
- }
-
- MicroSecondDelay (1000);
- PhyDetectDelay--;
- } while (PhyDetectDelay > 0);
-
- if (PhyDetectDelay == 0) {
- return EFI_NOT_FOUND;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG;
- Status = AhciWaitMmioSet (
- AhciBar,
- Offset,
- 0x0000FFFF,
- 0x00000101,
- 160000000
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return Status;
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h deleted file mode 100644 index 2076b0411b..0000000000 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h +++ /dev/null @@ -1,412 +0,0 @@ -/** @file
- Header file for AHCI mode of ATA host controller.
-
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#ifndef __OPAL_PASSWORD_AHCI_MODE_H__
-#define __OPAL_PASSWORD_AHCI_MODE_H__
-
-//
-// OPAL LIBRARY CALLBACKS
-//
-#define ATA_COMMAND_TRUSTED_RECEIVE 0x5C
-#define ATA_COMMAND_TRUSTED_SEND 0x5E
-
-//
-// ATA TRUSTED commands express transfer Length in 512 byte multiple
-//
-#define ATA_TRUSTED_TRANSFER_LENGTH_MULTIPLE 512
-#define ATA_DEVICE_LBA 0x40 ///< Set for commands with LBA (rather than CHS) addresses
-
-
-#define EFI_AHCI_BAR_INDEX 0x05
-
-#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
-#define EFI_AHCI_CAP_SAM BIT18
-#define EFI_AHCI_GHC_OFFSET 0x0004
-#define EFI_AHCI_GHC_RESET BIT0
-#define EFI_AHCI_GHC_IE BIT1
-#define EFI_AHCI_GHC_ENABLE BIT31
-#define EFI_AHCI_IS_OFFSET 0x0008
-#define EFI_AHCI_PI_OFFSET 0x000C
-
-typedef struct {
- UINT32 Lower32;
- UINT32 Upper32;
-} DATA_32;
-
-typedef union {
- DATA_32 Uint32;
- UINT64 Uint64;
-} DATA_64;
-
-//
-// Each PRDT entry can point to a memory block up to 4M byte
-//
-#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
-
-#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
-#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
-#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
-#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
-#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
-#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
-#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA Setup FIS - Bi-directional
-#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
-#define EFI_AHCI_FIS_DATA 0x46 //Data FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST 0x58 //BIST Activate FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST_LENGTH 12
-#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup FIS - Device to Host
-#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
-#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device Bits FIS - Device to Host
-#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
-
-#define EFI_AHCI_D2H_FIS_OFFSET 0x40
-#define EFI_AHCI_DMA_FIS_OFFSET 0x00
-#define EFI_AHCI_PIO_FIS_OFFSET 0x20
-#define EFI_AHCI_SDB_FIS_OFFSET 0x58
-#define EFI_AHCI_FIS_TYPE_MASK 0xFF
-#define EFI_AHCI_U_FIS_OFFSET 0x60
-
-//
-// Port register
-//
-#define EFI_AHCI_PORT_START 0x0100
-#define EFI_AHCI_PORT_REG_WIDTH 0x0080
-#define EFI_AHCI_PORT_CLB 0x0000
-#define EFI_AHCI_PORT_CLBU 0x0004
-#define EFI_AHCI_PORT_FB 0x0008
-#define EFI_AHCI_PORT_FBU 0x000C
-#define EFI_AHCI_PORT_IS 0x0010
-#define EFI_AHCI_PORT_IS_DHRS BIT0
-#define EFI_AHCI_PORT_IS_PSS BIT1
-#define EFI_AHCI_PORT_IS_SSS BIT2
-#define EFI_AHCI_PORT_IS_SDBS BIT3
-#define EFI_AHCI_PORT_IS_UFS BIT4
-#define EFI_AHCI_PORT_IS_DPS BIT5
-#define EFI_AHCI_PORT_IS_PCS BIT6
-#define EFI_AHCI_PORT_IS_DIS BIT7
-#define EFI_AHCI_PORT_IS_PRCS BIT22
-#define EFI_AHCI_PORT_IS_IPMS BIT23
-#define EFI_AHCI_PORT_IS_OFS BIT24
-#define EFI_AHCI_PORT_IS_INFS BIT26
-#define EFI_AHCI_PORT_IS_IFS BIT27
-#define EFI_AHCI_PORT_IS_HBDS BIT28
-#define EFI_AHCI_PORT_IS_HBFS BIT29
-#define EFI_AHCI_PORT_IS_TFES BIT30
-#define EFI_AHCI_PORT_IS_CPDS BIT31
-#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
-
-#define EFI_AHCI_PORT_IE 0x0014
-#define EFI_AHCI_PORT_CMD 0x0018
-#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
-#define EFI_AHCI_PORT_CMD_ST BIT0
-#define EFI_AHCI_PORT_CMD_SUD BIT1
-#define EFI_AHCI_PORT_CMD_POD BIT2
-#define EFI_AHCI_PORT_CMD_COL BIT3
-#define EFI_AHCI_PORT_CMD_CR BIT15
-#define EFI_AHCI_PORT_CMD_FRE BIT4
-#define EFI_AHCI_PORT_CMD_FR BIT14
-#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
-#define EFI_AHCI_PORT_CMD_PMA BIT17
-#define EFI_AHCI_PORT_CMD_HPCP BIT18
-#define EFI_AHCI_PORT_CMD_MPSP BIT19
-#define EFI_AHCI_PORT_CMD_CPD BIT20
-#define EFI_AHCI_PORT_CMD_ESP BIT21
-#define EFI_AHCI_PORT_CMD_ATAPI BIT24
-#define EFI_AHCI_PORT_CMD_DLAE BIT25
-#define EFI_AHCI_PORT_CMD_ALPE BIT26
-#define EFI_AHCI_PORT_CMD_ASP BIT27
-#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
-#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
-#define EFI_AHCI_PORT_TFD 0x0020
-#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
-#define EFI_AHCI_PORT_TFD_BSY BIT7
-#define EFI_AHCI_PORT_TFD_DRQ BIT3
-#define EFI_AHCI_PORT_TFD_ERR BIT0
-#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
-#define EFI_AHCI_PORT_SIG 0x0024
-#define EFI_AHCI_PORT_SSTS 0x0028
-#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SSTS_DET 0x0001
-#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
-#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL 0x002C
-#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
-#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
-#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
-#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
-#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
-#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
-#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
-#define EFI_AHCI_PORT_SERR 0x0030
-#define EFI_AHCI_PORT_SERR_RDIE BIT0
-#define EFI_AHCI_PORT_SERR_RCE BIT1
-#define EFI_AHCI_PORT_SERR_TDIE BIT8
-#define EFI_AHCI_PORT_SERR_PCDIE BIT9
-#define EFI_AHCI_PORT_SERR_PE BIT10
-#define EFI_AHCI_PORT_SERR_IE BIT11
-#define EFI_AHCI_PORT_SERR_PRC BIT16
-#define EFI_AHCI_PORT_SERR_PIE BIT17
-#define EFI_AHCI_PORT_SERR_CW BIT18
-#define EFI_AHCI_PORT_SERR_BDE BIT19
-#define EFI_AHCI_PORT_SERR_DE BIT20
-#define EFI_AHCI_PORT_SERR_CRCE BIT21
-#define EFI_AHCI_PORT_SERR_HE BIT22
-#define EFI_AHCI_PORT_SERR_LSE BIT23
-#define EFI_AHCI_PORT_SERR_TSTE BIT24
-#define EFI_AHCI_PORT_SERR_UFT BIT25
-#define EFI_AHCI_PORT_SERR_EX BIT26
-#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_SACT 0x0034
-#define EFI_AHCI_PORT_CI 0x0038
-#define EFI_AHCI_PORT_SNTF 0x003C
-
-
-#pragma pack(1)
-//
-// Command List structure includes total 32 entries.
-// The entry Data structure is listed at the following.
-//
-typedef struct {
- UINT32 AhciCmdCfl:5; //Command FIS Length
- UINT32 AhciCmdA:1; //ATAPI
- UINT32 AhciCmdW:1; //Write
- UINT32 AhciCmdP:1; //Prefetchable
- UINT32 AhciCmdR:1; //Reset
- UINT32 AhciCmdB:1; //BIST
- UINT32 AhciCmdC:1; //Clear Busy upon R_OK
- UINT32 AhciCmdRsvd:1;
- UINT32 AhciCmdPmp:4; //Port Multiplier Port
- UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
- UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
- UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
- UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
- UINT32 AhciCmdRsvd1[4];
-} EFI_AHCI_COMMAND_LIST;
-
-//
-// This is a software constructed FIS.
-// For Data transfer operations, this is the H2D Register FIS format as
-// specified in the Serial ATA Revision 2.6 specification.
-//
-typedef struct {
- UINT8 AhciCFisType;
- UINT8 AhciCFisPmNum:4;
- UINT8 AhciCFisRsvd:1;
- UINT8 AhciCFisRsvd1:1;
- UINT8 AhciCFisRsvd2:1;
- UINT8 AhciCFisCmdInd:1;
- UINT8 AhciCFisCmd;
- UINT8 AhciCFisFeature;
- UINT8 AhciCFisSecNum;
- UINT8 AhciCFisClyLow;
- UINT8 AhciCFisClyHigh;
- UINT8 AhciCFisDevHead;
- UINT8 AhciCFisSecNumExp;
- UINT8 AhciCFisClyLowExp;
- UINT8 AhciCFisClyHighExp;
- UINT8 AhciCFisFeatureExp;
- UINT8 AhciCFisSecCount;
- UINT8 AhciCFisSecCountExp;
- UINT8 AhciCFisRsvd3;
- UINT8 AhciCFisControl;
- UINT8 AhciCFisRsvd4[4];
- UINT8 AhciCFisRsvd5[44];
-} EFI_AHCI_COMMAND_FIS;
-
-//
-// ACMD: ATAPI command (12 or 16 bytes)
-//
-typedef struct {
- UINT8 AtapiCmd[0x10];
-} EFI_AHCI_ATAPI_COMMAND;
-
-//
-// Physical Region Descriptor Table includes up to 65535 entries
-// The entry Data structure is listed at the following.
-// the actual entry number comes from the PRDTL field in the command
-// list entry for this command slot.
-//
-typedef struct {
- UINT32 AhciPrdtDba; //Data Base Address
- UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
- UINT32 AhciPrdtRsvd;
- UINT32 AhciPrdtDbc:22; //Data Byte Count
- UINT32 AhciPrdtRsvd1:9;
- UINT32 AhciPrdtIoc:1; //Interrupt on Completion
-} EFI_AHCI_COMMAND_PRDT;
-
-//
-// Command table Data strucute which is pointed to by the entry in the command list
-//
-typedef struct {
- EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
- EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
- UINT8 Reserved[0x30];
- EFI_AHCI_COMMAND_PRDT PrdtTable; // The scatter/gather list for Data transfer
-} EFI_AHCI_COMMAND_TABLE;
-
-//
-// Received FIS structure
-//
-typedef struct {
- UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
- UINT8 AhciDmaSetupFisRsvd[0x04];
- UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
- UINT8 AhciPioSetupFisRsvd[0x0C];
- UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
- UINT8 AhciD2HRegisterFisRsvd[0x04];
- UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
- UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
- UINT8 AhciUnknownFisRsvd[0x60];
-} EFI_AHCI_RECEIVED_FIS;
-
-#pragma pack()
-
-typedef struct {
- EFI_AHCI_RECEIVED_FIS *AhciRFis;
- VOID *AhciRFisMapping;
- EFI_AHCI_COMMAND_LIST *AhciCmdList;
- VOID *AhciCmdListMapping;
- EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
- VOID *AhciCommandTableMapping;
-} EFI_AHCI_REGISTERS;
-
-typedef struct {
- VOID *Buffer;
- VOID *BufferMapping;
- EFI_AHCI_REGISTERS AhciRegisters;
- UINT32 AhciBar;
-} AHCI_CONTEXT;
-
-/**
- Allocate transfer-related data struct which is used at AHCI mode.
-
- @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
-
- @retval EFI_OUT_OF_RESOURCE No enough resource.
- @retval EFI_SUCCESS Successful to allocate resource.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciAllocateResource (
- IN OUT AHCI_CONTEXT *AhciContext
- );
-
-/**
- Free allocated transfer-related data struct which is used at AHCI mode.
-
- @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
-
-**/
-VOID
-EFIAPI
-AhciFreeResource (
- IN OUT AHCI_CONTEXT *AhciContext
- );
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] AhciContext The pointer to the AHCI_CONTEXT.
- @param[in] Port The port number to do initialization.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialize (
- IN AHCI_CONTEXT *AhciContext,
- IN UINT8 Port
- );
-
-typedef struct _EFI_ATA_COMMAND_BLOCK {
- UINT8 Reserved1[2];
- UINT8 AtaCommand;
- UINT8 AtaFeatures;
- UINT8 AtaSectorNumber;
- UINT8 AtaCylinderLow;
- UINT8 AtaCylinderHigh;
- UINT8 AtaDeviceHead;
- UINT8 AtaSectorNumberExp;
- UINT8 AtaCylinderLowExp;
- UINT8 AtaCylinderHighExp;
- UINT8 AtaFeaturesExp;
- UINT8 AtaSectorCount;
- UINT8 AtaSectorCountExp;
- UINT8 Reserved2[6];
-} EFI_ATA_COMMAND_BLOCK;
-
-typedef struct _EFI_ATA_STATUS_BLOCK {
- UINT8 Reserved1[2];
- UINT8 AtaStatus;
- UINT8 AtaError;
- UINT8 AtaSectorNumber;
- UINT8 AtaCylinderLow;
- UINT8 AtaCylinderHigh;
- UINT8 AtaDeviceHead;
- UINT8 AtaSectorNumberExp;
- UINT8 AtaCylinderLowExp;
- UINT8 AtaCylinderHighExp;
- UINT8 Reserved2;
- UINT8 AtaSectorCount;
- UINT8 AtaSectorCountExp;
- UINT8 Reserved3[6];
-} EFI_ATA_STATUS_BLOCK;
-
-/**
- Start a PIO Data transfer on specific port.
-
- @param AhciContext The pointer to the AHCI_CONTEXT.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param Read The transfer direction.
- @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
- @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
- @param MemoryAddr The pointer to the Data Buffer.
- @param DataCount The Data count to be transferred.
- @param Timeout The timeout Value of non Data transfer.
-
- @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO Data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN AHCI_CONTEXT *AhciContext,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout
- );
-
-
-#endif
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c index b5317d82b8..c1b3c7930d 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c @@ -21,40 +21,13 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "OpalDriver.h"
#include "OpalHii.h"
-EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
-EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
+EFI_GUID mOpalDeviceLockBoxGuid = OPAL_DEVICE_LOCKBOX_GUID;
BOOLEAN mOpalEndOfDxe = FALSE;
OPAL_REQUEST_VARIABLE *mOpalRequestVariable = NULL;
UINTN mOpalRequestVariableSize = 0;
CHAR16 mPopUpString[100];
-typedef struct {
- UINT32 Address;
- S3_BOOT_SCRIPT_LIB_WIDTH Width;
-} OPAL_HC_PCI_REGISTER_SAVE;
-
-//
-// To unlock the Intel SATA controller at S3 Resume, restored the following registers.
-//
-const OPAL_HC_PCI_REGISTER_SAVE mSataHcRegisterSaveTemplate[] = {
- {0x9, S3BootScriptWidthUint8},
- {0x10, S3BootScriptWidthUint32},
- {0x14, S3BootScriptWidthUint32},
- {0x18, S3BootScriptWidthUint32},
- {0x1C, S3BootScriptWidthUint32},
- {0x20, S3BootScriptWidthUint32},
- {0x24, S3BootScriptWidthUint32},
- {0x3c, S3BootScriptWidthUint8},
- {0x3d, S3BootScriptWidthUint8},
- {0x40, S3BootScriptWidthUint16},
- {0x42, S3BootScriptWidthUint16},
- {0x92, S3BootScriptWidthUint16},
- {0x94, S3BootScriptWidthUint32},
- {0x9C, S3BootScriptWidthUint32},
- {0x4, S3BootScriptWidthUint16},
-};
-
OPAL_DRIVER mOpalDriver;
//
@@ -233,14 +206,12 @@ OpalSupportUpdatePassword ( @param[out] DevInfoLength Device information length needed.
@param[out] DevInfo Device information extracted.
- @return Device type.
-
**/
-UINT8
+VOID
ExtractDeviceInfoFromDevicePath (
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- OUT UINT16 *DevInfoLength,
- OUT OPAL_DEVICE_COMMON *DevInfo OPTIONAL
+ OUT UINT32 *DevInfoLength,
+ OUT OPAL_DEVICE_LOCKBOX_DATA *DevInfo OPTIONAL
)
{
EFI_DEVICE_PATH_PROTOCOL *TmpDevPath;
@@ -249,10 +220,6 @@ ExtractDeviceInfoFromDevicePath ( UINT8 DeviceType;
UINT8 BusNum;
OPAL_PCI_DEVICE *PciDevice;
- OPAL_DEVICE_ATA *DevInfoAta;
- OPAL_DEVICE_NVME *DevInfoNvme;
- SATA_DEVICE_PATH *SataDevPath;
- NVME_NAMESPACE_DEVICE_PATH *NvmeDevPath;
ASSERT (DevicePath != NULL);
ASSERT (DevInfoLength != NULL);
@@ -266,30 +233,15 @@ ExtractDeviceInfoFromDevicePath ( // Get device type.
//
while (!IsDevicePathEnd (TmpDevPath)) {
- if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_SATA_DP) {
- //
- // SATA
- //
- if (DevInfo != NULL) {
- SataDevPath = (SATA_DEVICE_PATH *) TmpDevPath;
- DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
- DevInfoAta->Port = SataDevPath->HBAPortNumber;
- DevInfoAta->PortMultiplierPort = SataDevPath->PortMultiplierPortNumber;
- }
- DeviceType = OPAL_DEVICE_TYPE_ATA;
- *DevInfoLength = sizeof (OPAL_DEVICE_ATA);
- break;
- } else if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP) {
- //
- // NVMe
- //
+ if ((TmpDevPath->Type == MESSAGING_DEVICE_PATH) &&
+ (TmpDevPath->SubType == MSG_SATA_DP || TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP)) {
if (DevInfo != NULL) {
- NvmeDevPath = (NVME_NAMESPACE_DEVICE_PATH *) TmpDevPath;
- DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
- DevInfoNvme->NvmeNamespaceId = NvmeDevPath->NamespaceId;
+ DevInfo->DevicePathLength = (UINT32) GetDevicePathSize (DevicePath);
+ CopyMem (DevInfo->DevicePath, DevicePath, DevInfo->DevicePathLength);
}
- DeviceType = OPAL_DEVICE_TYPE_NVME;
- *DevInfoLength = sizeof (OPAL_DEVICE_NVME);
+
+ DeviceType = (TmpDevPath->SubType == MSG_SATA_DP) ? OPAL_DEVICE_TYPE_ATA : OPAL_DEVICE_TYPE_NVME;
+ *DevInfoLength = sizeof (OPAL_DEVICE_LOCKBOX_DATA) + (UINT32) GetDevicePathSize (DevicePath);
break;
}
TmpDevPath = NextDevicePathNode (TmpDevPath);
@@ -304,8 +256,8 @@ ExtractDeviceInfoFromDevicePath ( while (!IsDevicePathEnd (TmpDevPath2)) {
if (TmpDevPath->Type == HARDWARE_DEVICE_PATH && TmpDevPath->SubType == HW_PCI_DP) {
PciDevPath = (PCI_DEVICE_PATH *) TmpDevPath;
- if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)||
- (TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_SATA_DP)) {
+ if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH) &&
+ (TmpDevPath2->SubType == MSG_SATA_DP || TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)) {
if (DevInfo != NULL) {
PciDevice = &DevInfo->Device;
PciDevice->Segment = 0;
@@ -314,14 +266,6 @@ ExtractDeviceInfoFromDevicePath ( PciDevice->Function = PciDevPath->Function;
}
} else {
- if (DevInfo != NULL) {
- PciDevice = (OPAL_PCI_DEVICE *) ((UINTN) DevInfo + *DevInfoLength);
- PciDevice->Segment = 0;
- PciDevice->Bus = BusNum;
- PciDevice->Device = PciDevPath->Device;
- PciDevice->Function = PciDevPath->Function;
- }
- *DevInfoLength += sizeof (OPAL_PCI_DEVICE);
if (TmpDevPath2->Type == HARDWARE_DEVICE_PATH && TmpDevPath2->SubType == HW_PCI_DP) {
BusNum = PciRead8 (PCI_LIB_ADDRESS (BusNum, PciDevPath->Device, PciDevPath->Function, PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET));
}
@@ -333,251 +277,157 @@ ExtractDeviceInfoFromDevicePath ( }
ASSERT (DeviceType != OPAL_DEVICE_TYPE_UNKNOWN);
- return DeviceType;
-}
-
-/**
- Save boot script for ATA OPAL device.
-
- @param[in] DevInfo Pointer to ATA Opal device information.
-
- **/
-VOID
-OpalDeviceAtaSaveBootScript (
- IN OPAL_DEVICE_ATA *DevInfo
- )
-{
- UINTN Bus;
- UINTN Device;
- UINTN Function;
- UINTN Index;
- EFI_STATUS Status;
- UINTN Offset;
- UINT64 Address;
- S3_BOOT_SCRIPT_LIB_WIDTH Width;
- UINT32 Data;
- OPAL_HC_PCI_REGISTER_SAVE *HcRegisterSaveListPtr;
- UINTN Count;
-
- Data = 0;
-
- Bus = DevInfo->Device.Bus;
- Device = DevInfo->Device.Device;
- Function = DevInfo->Device.Function;
-
- HcRegisterSaveListPtr = (OPAL_HC_PCI_REGISTER_SAVE *) mSataHcRegisterSaveTemplate;
- Count = sizeof (mSataHcRegisterSaveTemplate) / sizeof (OPAL_HC_PCI_REGISTER_SAVE);
-
- for (Index = 0; Index < Count; Index++) {
- Offset = HcRegisterSaveListPtr[Index].Address;
- Width = HcRegisterSaveListPtr[Index].Width;
-
- switch (Width) {
- case S3BootScriptWidthUint8:
- Data = (UINT32)PciRead8 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- case S3BootScriptWidthUint16:
- Data = (UINT32)PciRead16 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- case S3BootScriptWidthUint32:
- Data = PciRead32 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- default:
- ASSERT (FALSE);
- break;
- }
-
- Address = S3_BOOT_SCRIPT_LIB_PCI_ADDRESS (Bus, Device, Function, Offset);
- Status = S3BootScriptSavePciCfgWrite (Width, Address, 1, &Data);
- ASSERT_EFI_ERROR (Status);
- }
+ return;
}
/**
- Build ATA OPAL device info and save them to LockBox.
-
- @param[in] BarAddr Bar address allocated.
+ Build OPAL device info and save them to LockBox.
**/
VOID
-BuildOpalDeviceInfoAta (
- IN UINT32 BarAddr
+BuildOpalDeviceInfo (
+ VOID
)
{
- EFI_STATUS Status;
- UINT8 DeviceType;
- OPAL_DEVICE_ATA *DevInfoAta;
- OPAL_DEVICE_ATA *TempDevInfoAta;
- UINTN DevInfoLengthAta;
- UINT16 DevInfoLength;
- OPAL_DRIVER_DEVICE *TmpDev;
+ EFI_STATUS Status;
+ OPAL_DEVICE_LOCKBOX_DATA *DevInfo;
+ OPAL_DEVICE_LOCKBOX_DATA *TempDevInfo;
+ UINTN TotalDevInfoLength;
+ UINT32 DevInfoLength;
+ OPAL_DRIVER_DEVICE *TmpDev;
+ UINT8 DummyData;
+ BOOLEAN S3InitDevicesExist;
+ UINTN S3InitDevicesLength;
+ EFI_DEVICE_PATH_PROTOCOL *S3InitDevices;
+ EFI_DEVICE_PATH_PROTOCOL *S3InitDevicesBak;
//
- // Build ATA OPAL device info and save them to LockBox.
+ // Build OPAL device info and save them to LockBox.
//
- DevInfoLengthAta = 0;
+ TotalDevInfoLength = 0;
TmpDev = mOpalDriver.DeviceList;
while (TmpDev != NULL) {
- DeviceType = ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- NULL
- );
- if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
- DevInfoLengthAta += DevInfoLength;
- }
-
+ ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ NULL
+ );
+ TotalDevInfoLength += DevInfoLength;
TmpDev = TmpDev->Next;
}
- if (DevInfoLengthAta == 0) {
+ if (TotalDevInfoLength == 0) {
return;
}
- DevInfoAta = AllocateZeroPool (DevInfoLengthAta);
- ASSERT (DevInfoAta != NULL);
- if (DevInfoAta == NULL) {
- return;
- }
-
- TempDevInfoAta = DevInfoAta;
- TmpDev = mOpalDriver.DeviceList;
- while (TmpDev != NULL) {
- DeviceType = ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- NULL
- );
- if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
- ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- (OPAL_DEVICE_COMMON *) TempDevInfoAta
- );
- TempDevInfoAta->Length = DevInfoLength;
- TempDevInfoAta->OpalBaseComId = TmpDev->OpalDisk.OpalBaseComId;
- TempDevInfoAta->BarAddr = BarAddr;
- CopyMem (
- TempDevInfoAta->Password,
- TmpDev->OpalDisk.Password,
- TmpDev->OpalDisk.PasswordLength
- );
- TempDevInfoAta->PasswordLength = TmpDev->OpalDisk.PasswordLength;
- OpalDeviceAtaSaveBootScript (TempDevInfoAta);
- TempDevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) TempDevInfoAta + DevInfoLength);
- }
-
- TmpDev = TmpDev->Next;
- }
-
- Status = SaveLockBox (
- &mOpalDeviceAtaGuid,
- DevInfoAta,
- DevInfoLengthAta
+ S3InitDevicesLength = sizeof (DummyData);
+ Status = RestoreLockBox (
+ &gS3StorageDeviceInitListGuid,
+ &DummyData,
+ &S3InitDevicesLength
);
- ASSERT_EFI_ERROR (Status);
-
- Status = SetLockBoxAttributes (
- &mOpalDeviceAtaGuid,
- LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
- );
- ASSERT_EFI_ERROR (Status);
-
- ZeroMem (DevInfoAta, DevInfoLengthAta);
- FreePool (DevInfoAta);
-}
-
-/**
- Build NVMe OPAL device info and save them to LockBox.
-
- @param[in] BarAddr Bar address allocated.
-
- **/
-VOID
-BuildOpalDeviceInfoNvme (
- IN UINT32 BarAddr
- )
-{
- EFI_STATUS Status;
- UINT8 DeviceType;
- OPAL_DEVICE_NVME *DevInfoNvme;
- OPAL_DEVICE_NVME *TempDevInfoNvme;
- UINTN DevInfoLengthNvme;
- UINT16 DevInfoLength;
- OPAL_DRIVER_DEVICE *TmpDev;
-
- //
- // Build NVMe OPAL device info and save them to LockBox.
- //
- DevInfoLengthNvme = 0;
- TmpDev = mOpalDriver.DeviceList;
- while (TmpDev != NULL) {
- DeviceType = ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- NULL
- );
- if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
- DevInfoLengthNvme += DevInfoLength;
+ ASSERT ((Status == EFI_NOT_FOUND) || (Status == EFI_BUFFER_TOO_SMALL));
+ if (Status == EFI_NOT_FOUND) {
+ S3InitDevices = NULL;
+ S3InitDevicesExist = FALSE;
+ } else if (Status == EFI_BUFFER_TOO_SMALL) {
+ S3InitDevices = AllocatePool (S3InitDevicesLength);
+ ASSERT (S3InitDevices != NULL);
+ if (S3InitDevices == NULL) {
+ return;
}
- TmpDev = TmpDev->Next;
- }
-
- if (DevInfoLengthNvme == 0) {
+ Status = RestoreLockBox (
+ &gS3StorageDeviceInitListGuid,
+ S3InitDevices,
+ &S3InitDevicesLength
+ );
+ ASSERT_EFI_ERROR (Status);
+ S3InitDevicesExist = TRUE;
+ } else {
return;
}
- DevInfoNvme = AllocateZeroPool (DevInfoLengthNvme);
- ASSERT (DevInfoNvme != NULL);
- if (DevInfoNvme == NULL) {
+ DevInfo = AllocateZeroPool (TotalDevInfoLength);
+ ASSERT (DevInfo != NULL);
+ if (DevInfo == NULL) {
return;
}
- TempDevInfoNvme = DevInfoNvme;
- TmpDev = mOpalDriver.DeviceList;
+ TempDevInfo = DevInfo;
+ TmpDev = mOpalDriver.DeviceList;
while (TmpDev != NULL) {
- DeviceType = ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- NULL
- );
- if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
- ExtractDeviceInfoFromDevicePath (
- TmpDev->OpalDisk.OpalDevicePath,
- &DevInfoLength,
- (OPAL_DEVICE_COMMON *) TempDevInfoNvme
- );
- TempDevInfoNvme->Length = DevInfoLength;
- TempDevInfoNvme->OpalBaseComId = TmpDev->OpalDisk.OpalBaseComId;
- TempDevInfoNvme->BarAddr = BarAddr;
- CopyMem (
- TempDevInfoNvme->Password,
- TmpDev->OpalDisk.Password,
- TmpDev->OpalDisk.PasswordLength
- );
- TempDevInfoNvme->PasswordLength = TmpDev->OpalDisk.PasswordLength;
- TempDevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) TempDevInfoNvme + DevInfoLength);
+ ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ TempDevInfo
+ );
+ TempDevInfo->Length = DevInfoLength;
+ TempDevInfo->OpalBaseComId = TmpDev->OpalDisk.OpalBaseComId;
+ CopyMem (
+ TempDevInfo->Password,
+ TmpDev->OpalDisk.Password,
+ TmpDev->OpalDisk.PasswordLength
+ );
+ TempDevInfo->PasswordLength = TmpDev->OpalDisk.PasswordLength;
+
+ S3InitDevicesBak = S3InitDevices;
+ S3InitDevices = AppendDevicePathInstance (
+ S3InitDevicesBak,
+ TmpDev->OpalDisk.OpalDevicePath
+ );
+ if (S3InitDevicesBak != NULL) {
+ FreePool (S3InitDevicesBak);
+ }
+ ASSERT (S3InitDevices != NULL);
+ if (S3InitDevices == NULL) {
+ return;
}
+ TempDevInfo = (OPAL_DEVICE_LOCKBOX_DATA *) ((UINTN) TempDevInfo + DevInfoLength);
TmpDev = TmpDev->Next;
}
Status = SaveLockBox (
- &mOpalDeviceNvmeGuid,
- DevInfoNvme,
- DevInfoLengthNvme
+ &mOpalDeviceLockBoxGuid,
+ DevInfo,
+ TotalDevInfoLength
);
ASSERT_EFI_ERROR (Status);
Status = SetLockBoxAttributes (
- &mOpalDeviceNvmeGuid,
+ &mOpalDeviceLockBoxGuid,
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
);
ASSERT_EFI_ERROR (Status);
- ZeroMem (DevInfoNvme, DevInfoLengthNvme);
- FreePool (DevInfoNvme);
+ S3InitDevicesLength = GetDevicePathSize (S3InitDevices);
+ if (S3InitDevicesExist) {
+ Status = UpdateLockBox (
+ &gS3StorageDeviceInitListGuid,
+ 0,
+ S3InitDevices,
+ S3InitDevicesLength
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else {
+ Status = SaveLockBox (
+ &gS3StorageDeviceInitListGuid,
+ S3InitDevices,
+ S3InitDevicesLength
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = SetLockBoxAttributes (
+ &gS3StorageDeviceInitListGuid,
+ LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ ZeroMem (DevInfo, TotalDevInfoLength);
+ FreePool (DevInfo);
+ FreePool (S3InitDevices);
}
/**
@@ -596,9 +446,6 @@ OpalEndOfDxeEventNotify ( VOID *Context
)
{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS Address;
- UINT64 Length;
OPAL_DRIVER_DEVICE *TmpDev;
DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
@@ -623,24 +470,7 @@ OpalEndOfDxeEventNotify ( return;
}
- //
- // Assume 64K size and alignment are enough.
- //
- Length = 0x10000;
- Address = 0xFFFFFFFF;
- Status = gDS->AllocateMemorySpace (
- EfiGcdAllocateMaxAddressSearchBottomUp,
- EfiGcdMemoryTypeMemoryMappedIo,
- 16, // 2^16: 64K Alignment
- Length,
- &Address,
- gImageHandle,
- NULL
- );
- ASSERT_EFI_ERROR (Status);
-
- BuildOpalDeviceInfoAta ((UINT32) Address);
- BuildOpalDeviceInfoNvme ((UINT32) Address);
+ BuildOpalDeviceInfo ();
//
// Zero passsword.
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h index 2bca770620..1baa483e72 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h @@ -1,7 +1,7 @@ /** @file
Values defined and used by the Opal UEFI Driver.
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -28,6 +28,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Protocol/StorageSecurityCommand.h>
#include <Guid/EventGroup.h>
+#include <Guid/S3StorageDeviceInitList.h>
#include <Library/UefiLib.h>
#include <Library/UefiBootServicesTableLib.h>
@@ -42,7 +43,6 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Library/HiiLib.h>
#include <Library/UefiHiiServicesLib.h>
#include <Library/PciLib.h>
-#include <Library/S3BootScriptLib.h>
#include <Library/LockBoxLib.h>
#include <Library/TcgStorageOpalLib.h>
#include <Library/Tcg2PhysicalPresenceLib.h>
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c deleted file mode 100644 index 01c316d597..0000000000 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c +++ /dev/null @@ -1,1823 +0,0 @@ -/** @file
- Provide functions to initialize NVME controller and perform NVME commands
-
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalPasswordPei.h"
-
-
-#define ALIGN(v, a) (UINTN)((((v) - 1) | ((a) - 1)) + 1)
-
-///
-/// NVME Host controller registers operation
-///
-#define NVME_GET_CAP(Nvme, Cap) NvmeMmioRead (Cap, Nvme->Nbar + NVME_CAP_OFFSET, sizeof (NVME_CAP))
-#define NVME_GET_CC(Nvme, Cc) NvmeMmioRead (Cc, Nvme->Nbar + NVME_CC_OFFSET, sizeof (NVME_CC))
-#define NVME_SET_CC(Nvme, Cc) NvmeMmioWrite (Nvme->Nbar + NVME_CC_OFFSET, Cc, sizeof (NVME_CC))
-#define NVME_GET_CSTS(Nvme, Csts) NvmeMmioRead (Csts, Nvme->Nbar + NVME_CSTS_OFFSET, sizeof (NVME_CSTS))
-#define NVME_GET_AQA(Nvme, Aqa) NvmeMmioRead (Aqa, Nvme->Nbar + NVME_AQA_OFFSET, sizeof (NVME_AQA))
-#define NVME_SET_AQA(Nvme, Aqa) NvmeMmioWrite (Nvme->Nbar + NVME_AQA_OFFSET, Aqa, sizeof (NVME_AQA))
-#define NVME_GET_ASQ(Nvme, Asq) NvmeMmioRead (Asq, Nvme->Nbar + NVME_ASQ_OFFSET, sizeof (NVME_ASQ))
-#define NVME_SET_ASQ(Nvme, Asq) NvmeMmioWrite (Nvme->Nbar + NVME_ASQ_OFFSET, Asq, sizeof (NVME_ASQ))
-#define NVME_GET_ACQ(Nvme, Acq) NvmeMmioRead (Acq, Nvme->Nbar + NVME_ACQ_OFFSET, sizeof (NVME_ACQ))
-#define NVME_SET_ACQ(Nvme, Acq) NvmeMmioWrite (Nvme->Nbar + NVME_ACQ_OFFSET, Acq, sizeof (NVME_ACQ))
-#define NVME_GET_VER(Nvme, Ver) NvmeMmioRead (Ver, Nvme->Nbar + NVME_VER_OFFSET, sizeof (NVME_VER))
-#define NVME_SET_SQTDBL(Nvme, Qid, Sqtdbl) NvmeMmioWrite (Nvme->Nbar + NVME_SQTDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Sqtdbl, sizeof (NVME_SQTDBL))
-#define NVME_SET_CQHDBL(Nvme, Qid, Cqhdbl) NvmeMmioWrite (Nvme->Nbar + NVME_CQHDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Cqhdbl, sizeof (NVME_CQHDBL))
-
-///
-/// Base memory address
-///
-enum {
- BASEMEM_CONTROLLER_DATA,
- BASEMEM_IDENTIFY_DATA,
- BASEMEM_ASQ,
- BASEMEM_ACQ,
- BASEMEM_SQ,
- BASEMEM_CQ,
- BASEMEM_PRP,
- BASEMEM_SECURITY,
- MAX_BASEMEM_COUNT
-};
-
-///
-/// All of base memories are 4K(0x1000) alignment
-///
-#define NVME_MEM_BASE(Nvme) ((UINTN)(Nvme->BaseMem))
-#define NVME_CONTROL_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CONTROLLER_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_NAMESPACE_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_IDENTIFY_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_ASQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ASQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_ACQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ACQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_SQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_CQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_PRP_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_PRP) + ((index)*NVME_PRP_SIZE)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_SEC_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SECURITY)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-
-/**
- Transfer MMIO Data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-NvmeMmioRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- *((UINT32 *)MemBuffer) = MmioRead32 (MmioAddr);
- break;
-
- case 8:
- *((UINT64 *)MemBuffer) = MmioRead64 (MmioAddr);
- break;
-
- case 2:
- *((UINT16 *)MemBuffer) = MmioRead16 (MmioAddr);
- break;
-
- case 1:
- *((UINT8 *)MemBuffer) = MmioRead8 (MmioAddr);
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = MmioRead8 (MmioAddr + Offset);
- Ptr[Offset] = Data;
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-NvmeMmioWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- MmioWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
- break;
-
- case 8:
- MmioWrite64 (MmioAddr, *((UINT64 *)MemBuffer));
- break;
-
- case 2:
- MmioWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
- break;
-
- case 1:
- MmioWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = Ptr[Offset];
- MmioWrite8 (MmioAddr + Offset, Data);
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer MMIO data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-OpalPciRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- *((UINT32 *)MemBuffer) = PciRead32 (MmioAddr);
- break;
-
- case 2:
- *((UINT16 *)MemBuffer) = PciRead16 (MmioAddr);
- break;
-
- case 1:
- *((UINT8 *)MemBuffer) = PciRead8 (MmioAddr);
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = PciRead8 (MmioAddr + Offset);
- Ptr[Offset] = Data;
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-OpalPciWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- PciWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
- break;
-
- case 2:
- PciWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
- break;
-
- case 1:
- PciWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = Ptr[Offset];
- PciWrite8 (MmioAddr + Offset, Data);
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Get total pages for specific NVME based memory.
-
- @param[in] BaseMemIndex - The Index of BaseMem (0-based).
-
- @retval - The page count for specific BaseMem Index
-
-**/
-UINT32
-NvmeGetBaseMemPages (
- IN UINTN BaseMemIndex
- )
-{
- UINT32 Pages;
- UINTN Index;
- UINT32 PageSizeList[8];
-
- PageSizeList[0] = 1; /* Controller Data */
- PageSizeList[1] = 1; /* Identify Data */
- PageSizeList[2] = 1; /* ASQ */
- PageSizeList[3] = 1; /* ACQ */
- PageSizeList[4] = 1; /* SQs */
- PageSizeList[5] = 1; /* CQs */
- PageSizeList[6] = NVME_PRP_SIZE * NVME_CSQ_DEPTH; /* PRPs */
- PageSizeList[7] = 1; /* Security Commands */
-
- if (BaseMemIndex > MAX_BASEMEM_COUNT) {
- ASSERT (FALSE);
- return 0;
- }
-
- Pages = 0;
- for (Index = 0; Index < BaseMemIndex; Index++) {
- Pages += PageSizeList[Index];
- }
-
- return Pages;
-}
-
-/**
- Wait for NVME controller status to be ready or not.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] WaitReady - Flag for waitting status ready or not
-
- @return EFI_SUCCESS - Successfully to wait specific status.
- @return others - Fail to wait for specific controller status.
-
-**/
-STATIC
-EFI_STATUS
-NvmeWaitController (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN WaitReady
- )
-{
- NVME_CSTS Csts;
- EFI_STATUS Status;
- UINT32 Index;
- UINT8 Timeout;
-
- //
- // Cap.To specifies max delay time in 500ms increments for Csts.Rdy to set after
- // Cc.Enable. Loop produces a 1 millisecond delay per itteration, up to 500 * Cap.To.
- //
- if (Nvme->Cap.To == 0) {
- Timeout = 1;
- } else {
- Timeout = Nvme->Cap.To;
- }
-
- Status = EFI_SUCCESS;
- for(Index = (Timeout * 500); Index != 0; --Index) {
- MicroSecondDelay (1000);
-
- //
- // Check if the controller is initialized
- //
- Status = NVME_GET_CSTS (Nvme, &Csts);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
- return Status;
- }
-
- if ((BOOLEAN) Csts.Rdy == WaitReady) {
- break;
- }
- }
-
- if (Index == 0) {
- Status = EFI_TIMEOUT;
- }
-
- return Status;
-}
-
-/**
- Disable the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully disable the controller.
- @return others - Fail to disable the controller.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDisableController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- NVME_CSTS Csts;
- EFI_STATUS Status;
-
- Status = NVME_GET_CSTS (Nvme, &Csts);
-
- ///
- /// Read Controller Configuration Register.
- ///
- Status = NVME_GET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
- goto Done;
- }
-
- if (Cc.En == 1) {
- Cc.En = 0;
- ///
- /// Disable the controller.
- ///
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- goto Done;
- }
- }
-
- Status = NvmeWaitController (Nvme, FALSE);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
- goto Done;
- }
-
- return EFI_SUCCESS;
-
-Done:
- DEBUG ((DEBUG_INFO, "NvmeDisableController fail, Status: %r\n", Status));
- return Status;
-}
-
-/**
- Enable the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully enable the controller.
- @return EFI_DEVICE_ERROR - Fail to enable the controller.
- @return EFI_TIMEOUT - Fail to enable the controller in given time slot.
-
-**/
-STATIC
-EFI_STATUS
-NvmeEnableController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- EFI_STATUS Status;
-
- //
- // Enable the controller
- //
- ZeroMem (&Cc, sizeof (NVME_CC));
- Cc.En = 1;
- Cc.Iosqes = 6;
- Cc.Iocqes = 4;
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- goto Done;
- }
-
- Status = NvmeWaitController (Nvme, TRUE);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
- goto Done;
- }
-
- return EFI_SUCCESS;
-
-Done:
- DEBUG ((DEBUG_INFO, "NvmeEnableController fail, Status: %r\n", Status));
- return Status;
-}
-
-/**
- Shutdown the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully shutdown the controller.
- @return EFI_DEVICE_ERROR - Fail to shutdown the controller.
- @return EFI_TIMEOUT - Fail to shutdown the controller in given time slot.
-
-**/
-STATIC
-EFI_STATUS
-NvmeShutdownController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- NVME_CSTS Csts;
- EFI_STATUS Status;
- UINT32 Index;
- UINTN Timeout;
-
- Status = NVME_GET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
- return Status;
- }
-
- Cc.Shn = 1; // Normal shutdown
-
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- return Status;
- }
-
- Timeout = NVME_GENERIC_TIMEOUT/1000; // ms
- for(Index = (UINT32)(Timeout); Index != 0; --Index) {
- MicroSecondDelay (1000);
-
- Status = NVME_GET_CSTS (Nvme, &Csts);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
- return Status;
- }
-
- if (Csts.Shst == 2) { // Shutdown processing complete
- break;
- }
- }
-
- if (Index == 0) {
- Status = EFI_TIMEOUT;
- }
-
- return Status;
-}
-
-/**
- Check the execution status from a given completion queue entry.
-
- @param[in] Cq - A pointer to the NVME_CQ item.
-
-**/
-EFI_STATUS
-NvmeCheckCqStatus (
- IN NVME_CQ *Cq
- )
-{
- if (Cq->Sct == 0x0 && Cq->Sc == 0x0) {
- return EFI_SUCCESS;
- }
-
- DEBUG ((DEBUG_INFO, "Dump NVMe Completion Entry Status from [0x%x]:\n", (UINTN)Cq));
- DEBUG ((DEBUG_INFO, " SQ Identifier : [0x%x], Phase Tag : [%d], Cmd Identifier : [0x%x]\n", Cq->Sqid, Cq->Pt, Cq->Cid));
- DEBUG ((DEBUG_INFO, " NVMe Cmd Execution Result - "));
-
- switch (Cq->Sct) {
- case 0x0:
- switch (Cq->Sc) {
- case 0x0:
- DEBUG ((DEBUG_INFO, "Successful Completion\n"));
- return EFI_SUCCESS;
- case 0x1:
- DEBUG ((DEBUG_INFO, "Invalid Command Opcode\n"));
- break;
- case 0x2:
- DEBUG ((DEBUG_INFO, "Invalid Field in Command\n"));
- break;
- case 0x3:
- DEBUG ((DEBUG_INFO, "Command ID Conflict\n"));
- break;
- case 0x4:
- DEBUG ((DEBUG_INFO, "Data Transfer Error\n"));
- break;
- case 0x5:
- DEBUG ((DEBUG_INFO, "Commands Aborted due to Power Loss Notification\n"));
- break;
- case 0x6:
- DEBUG ((DEBUG_INFO, "Internal Device Error\n"));
- break;
- case 0x7:
- DEBUG ((DEBUG_INFO, "Command Abort Requested\n"));
- break;
- case 0x8:
- DEBUG ((DEBUG_INFO, "Command Aborted due to SQ Deletion\n"));
- break;
- case 0x9:
- DEBUG ((DEBUG_INFO, "Command Aborted due to Failed Fused Command\n"));
- break;
- case 0xA:
- DEBUG ((DEBUG_INFO, "Command Aborted due to Missing Fused Command\n"));
- break;
- case 0xB:
- DEBUG ((DEBUG_INFO, "Invalid Namespace or Format\n"));
- break;
- case 0xC:
- DEBUG ((DEBUG_INFO, "Command Sequence Error\n"));
- break;
- case 0xD:
- DEBUG ((DEBUG_INFO, "Invalid SGL Last Segment Descriptor\n"));
- break;
- case 0xE:
- DEBUG ((DEBUG_INFO, "Invalid Number of SGL Descriptors\n"));
- break;
- case 0xF:
- DEBUG ((DEBUG_INFO, "Data SGL Length Invalid\n"));
- break;
- case 0x10:
- DEBUG ((DEBUG_INFO, "Metadata SGL Length Invalid\n"));
- break;
- case 0x11:
- DEBUG ((DEBUG_INFO, "SGL Descriptor Type Invalid\n"));
- break;
- case 0x80:
- DEBUG ((DEBUG_INFO, "LBA Out of Range\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Capacity Exceeded\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "Namespace Not Ready\n"));
- break;
- case 0x83:
- DEBUG ((DEBUG_INFO, "Reservation Conflict\n"));
- break;
- }
- break;
-
- case 0x1:
- switch (Cq->Sc) {
- case 0x0:
- DEBUG ((DEBUG_INFO, "Completion Queue Invalid\n"));
- break;
- case 0x1:
- DEBUG ((DEBUG_INFO, "Invalid Queue Identifier\n"));
- break;
- case 0x2:
- DEBUG ((DEBUG_INFO, "Maximum Queue Size Exceeded\n"));
- break;
- case 0x3:
- DEBUG ((DEBUG_INFO, "Abort Command Limit Exceeded\n"));
- break;
- case 0x5:
- DEBUG ((DEBUG_INFO, "Asynchronous Event Request Limit Exceeded\n"));
- break;
- case 0x6:
- DEBUG ((DEBUG_INFO, "Invalid Firmware Slot\n"));
- break;
- case 0x7:
- DEBUG ((DEBUG_INFO, "Invalid Firmware Image\n"));
- break;
- case 0x8:
- DEBUG ((DEBUG_INFO, "Invalid Interrupt Vector\n"));
- break;
- case 0x9:
- DEBUG ((DEBUG_INFO, "Invalid Log Page\n"));
- break;
- case 0xA:
- DEBUG ((DEBUG_INFO, "Invalid Format\n"));
- break;
- case 0xB:
- DEBUG ((DEBUG_INFO, "Firmware Application Requires Conventional Reset\n"));
- break;
- case 0xC:
- DEBUG ((DEBUG_INFO, "Invalid Queue Deletion\n"));
- break;
- case 0xD:
- DEBUG ((DEBUG_INFO, "Feature Identifier Not Saveable\n"));
- break;
- case 0xE:
- DEBUG ((DEBUG_INFO, "Feature Not Changeable\n"));
- break;
- case 0xF:
- DEBUG ((DEBUG_INFO, "Feature Not Namespace Specific\n"));
- break;
- case 0x10:
- DEBUG ((DEBUG_INFO, "Firmware Application Requires NVM Subsystem Reset\n"));
- break;
- case 0x80:
- DEBUG ((DEBUG_INFO, "Conflicting Attributes\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Invalid Protection Information\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "Attempted Write to Read Only Range\n"));
- break;
- }
- break;
-
- case 0x2:
- switch (Cq->Sc) {
- case 0x80:
- DEBUG ((DEBUG_INFO, "Write Fault\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Unrecovered Read Error\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "End-to-end Guard Check Error\n"));
- break;
- case 0x83:
- DEBUG ((DEBUG_INFO, "End-to-end Application Tag Check Error\n"));
- break;
- case 0x84:
- DEBUG ((DEBUG_INFO, "End-to-end Reference Tag Check Error\n"));
- break;
- case 0x85:
- DEBUG ((DEBUG_INFO, "Compare Failure\n"));
- break;
- case 0x86:
- DEBUG ((DEBUG_INFO, "Access Denied\n"));
- break;
- }
- break;
-
- default:
- DEBUG ((DEBUG_INFO, "Unknown error\n"));
- break;
- }
-
- return EFI_DEVICE_ERROR;
-}
-
-/**
- Create PRP lists for Data transfer which is larger than 2 memory pages.
- Note here we calcuate the number of required PRP lists and allocate them at one time.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SqId - The SQ index for this PRP
- @param[in] PhysicalAddr - The physical base address of Data Buffer.
- @param[in] Pages - The number of pages to be transfered.
- @param[out] PrpListHost - The host base address of PRP lists.
- @param[in,out] PrpListNo - The number of PRP List.
-
- @retval The pointer Value to the first PRP List of the PRP lists.
-
-**/
-STATIC
-UINT64
-NvmeCreatePrpList (
- IN NVME_CONTEXT *Nvme,
- IN UINT16 SqId,
- IN EFI_PHYSICAL_ADDRESS PhysicalAddr,
- IN UINTN Pages,
- OUT VOID **PrpListHost,
- IN OUT UINTN *PrpListNo
- )
-{
- UINTN PrpEntryNo;
- UINT64 PrpListBase;
- UINTN PrpListIndex;
- UINTN PrpEntryIndex;
- UINT64 Remainder;
- EFI_PHYSICAL_ADDRESS PrpListPhyAddr;
- UINTN Bytes;
- UINT8 *PrpEntry;
- EFI_PHYSICAL_ADDRESS NewPhyAddr;
-
- ///
- /// The number of Prp Entry in a memory page.
- ///
- PrpEntryNo = EFI_PAGE_SIZE / sizeof (UINT64);
-
- ///
- /// Calculate total PrpList number.
- ///
- *PrpListNo = (UINTN) DivU64x64Remainder ((UINT64)Pages, (UINT64)PrpEntryNo, &Remainder);
- if (Remainder != 0) {
- *PrpListNo += 1;
- }
-
- if (*PrpListNo > NVME_PRP_SIZE) {
- DEBUG ((DEBUG_INFO, "NvmeCreatePrpList (PhysicalAddr: %lx, Pages: %x) PrpEntryNo: %x\n",
- PhysicalAddr, Pages, PrpEntryNo));
- DEBUG ((DEBUG_INFO, "*PrpListNo: %x, Remainder: %lx", *PrpListNo, Remainder));
- ASSERT (FALSE);
- }
- *PrpListHost = (VOID *)(UINTN) NVME_PRP_BASE (Nvme, SqId);
-
- Bytes = EFI_PAGES_TO_SIZE (*PrpListNo);
- PrpListPhyAddr = (UINT64)(UINTN)(*PrpListHost);
-
- ///
- /// Fill all PRP lists except of last one.
- ///
- ZeroMem (*PrpListHost, Bytes);
- for (PrpListIndex = 0; PrpListIndex < *PrpListNo - 1; ++PrpListIndex) {
- PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
-
- for (PrpEntryIndex = 0; PrpEntryIndex < PrpEntryNo; ++PrpEntryIndex) {
- PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
- if (PrpEntryIndex != PrpEntryNo - 1) {
- ///
- /// Fill all PRP entries except of last one.
- ///
- CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
- PhysicalAddr += EFI_PAGE_SIZE;
- } else {
- ///
- /// Fill last PRP entries with next PRP List pointer.
- ///
- NewPhyAddr = (PrpListPhyAddr + (PrpListIndex + 1) * EFI_PAGE_SIZE);
- CopyMem (PrpEntry, (VOID *)(UINTN) (&NewPhyAddr), sizeof (UINT64));
- }
- }
- }
-
- ///
- /// Fill last PRP list.
- ///
- PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
- for (PrpEntryIndex = 0; PrpEntryIndex < ((Remainder != 0) ? Remainder : PrpEntryNo); ++PrpEntryIndex) {
- PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
- CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
-
- PhysicalAddr += EFI_PAGE_SIZE;
- }
-
- return PrpListPhyAddr;
-}
-
-/**
- Waits until all NVME commands completed.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All NVME commands have completed
- @retval EFI_TIMEOUT - Timeout occured
- @retval EFI_NOT_READY - Not all NVME commands have completed
- @retval others - Error occurred on device side.
-**/
-EFI_STATUS
-NvmeWaitAllComplete (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- )
-{
- return EFI_SUCCESS;
-}
-
-/**
- Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
- both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
- I/O functionality is optional.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- ID specifies that the command packet should be sent to all valid namespaces.
- @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- UUID specifies that the command packet should be sent to all valid namespaces.
- @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
- by NamespaceId.
-
- @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
- to, or from DataBuffer.
- @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
- may retry again later.
- @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
- @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
- Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
- The NVM Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
-
-**/
-EFI_STATUS
-NvmePassThru (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN UINT64 NamespaceUuid,
- IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
- )
-{
- EFI_STATUS Status;
- NVME_SQ *Sq;
- NVME_CQ *Cq;
- UINT8 Qid;
- UINT32 Bytes;
- UINT32 Offset;
- EFI_PHYSICAL_ADDRESS PhyAddr;
- VOID *PrpListHost;
- UINTN PrpListNo;
- UINT32 Timer;
- UINTN SqSize;
- UINTN CqSize;
-
- ///
- /// check the Data fields in Packet parameter.
- ///
- if ((Nvme == NULL) || (Packet == NULL)) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: Nvme(%x)/Packet(%x)\n",
- (UINTN)Nvme, (UINTN)Packet));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Packet->NvmeCmd == NULL) || (Packet->NvmeResponse == NULL)) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: NvmeCmd(%x)/NvmeResponse(%x)\n",
- (UINTN)Packet->NvmeCmd, (UINTN)Packet->NvmeResponse));
- return EFI_INVALID_PARAMETER;
- }
-
- if (Packet->QueueId != NVME_ADMIN_QUEUE && Packet->QueueId != NVME_IO_QUEUE) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: QueueId(%x)\n",
- Packet->QueueId));
- return EFI_INVALID_PARAMETER;
- }
-
- PrpListHost = NULL;
- PrpListNo = 0;
- Status = EFI_SUCCESS;
-
- Qid = Packet->QueueId;
- Sq = Nvme->SqBuffer[Qid] + Nvme->SqTdbl[Qid].Sqt;
- Cq = Nvme->CqBuffer[Qid] + Nvme->CqHdbl[Qid].Cqh;
- if (Qid == NVME_ADMIN_QUEUE) {
- SqSize = NVME_ASQ_SIZE + 1;
- CqSize = NVME_ACQ_SIZE + 1;
- } else {
- SqSize = NVME_CSQ_DEPTH;
- CqSize = NVME_CCQ_DEPTH;
- }
-
- if (Packet->NvmeCmd->Nsid != NamespaceId) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru: Nsid mismatch (%x, %x)\n",
- Packet->NvmeCmd->Nsid, NamespaceId));
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (Sq, sizeof (NVME_SQ));
- Sq->Opc = Packet->NvmeCmd->Cdw0.Opcode;
- Sq->Fuse = Packet->NvmeCmd->Cdw0.FusedOperation;
- Sq->Cid = Packet->NvmeCmd->Cdw0.Cid;
- Sq->Nsid = Packet->NvmeCmd->Nsid;
-
- ///
- /// Currently we only support PRP for Data transfer, SGL is NOT supported.
- ///
- ASSERT (Sq->Psdt == 0);
- if (Sq->Psdt != 0) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru: doesn't support SGL mechanism\n"));
- return EFI_UNSUPPORTED;
- }
-
- Sq->Prp[0] = Packet->TransferBuffer;
- Sq->Prp[1] = 0;
-
- if(Packet->MetadataBuffer != (UINT64)(UINTN)NULL) {
- Sq->Mptr = Packet->MetadataBuffer;
- }
-
- ///
- /// If the Buffer Size spans more than two memory pages (page Size as defined in CC.Mps),
- /// then build a PRP list in the second PRP submission queue entry.
- ///
- Offset = ((UINT32)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
- Bytes = Packet->TransferLength;
-
- if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
- ///
- /// Create PrpList for remaining Data Buffer.
- ///
- PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
- Sq->Prp[1] = NvmeCreatePrpList (Nvme, Nvme->SqTdbl[Qid].Sqt, PhyAddr, EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo);
- if (Sq->Prp[1] == 0) {
- Status = EFI_OUT_OF_RESOURCES;
- DEBUG ((DEBUG_ERROR, "NvmeCreatePrpList fail, Status: %r\n", Status));
- goto EXIT;
- }
-
- } else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
- Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
- }
-
- if(Packet->NvmeCmd->Flags & CDW10_VALID) {
- Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
- }
- if(Packet->NvmeCmd->Flags & CDW11_VALID) {
- Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
- }
- if(Packet->NvmeCmd->Flags & CDW12_VALID) {
- Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
- }
- if(Packet->NvmeCmd->Flags & CDW13_VALID) {
- Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
- }
- if(Packet->NvmeCmd->Flags & CDW14_VALID) {
- Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
- }
- if(Packet->NvmeCmd->Flags & CDW15_VALID) {
- Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
- }
-
- ///
- /// Ring the submission queue doorbell.
- ///
- Nvme->SqTdbl[Qid].Sqt++;
- if(Nvme->SqTdbl[Qid].Sqt == SqSize) {
- Nvme->SqTdbl[Qid].Sqt = 0;
- }
- Status = NVME_SET_SQTDBL (Nvme, Qid, &Nvme->SqTdbl[Qid]);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_SQTDBL fail, Status: %r\n", Status));
- goto EXIT;
- }
-
- ///
- /// Wait for completion queue to get filled in.
- ///
- Status = EFI_TIMEOUT;
- Timer = 0;
- while (Timer < NVME_CMD_TIMEOUT) {
- //DEBUG ((DEBUG_VERBOSE, "Timer: %x, Cq:\n", Timer));
- //DumpMem (Cq, sizeof (NVME_CQ));
- if (Cq->Pt != Nvme->Pt[Qid]) {
- Status = EFI_SUCCESS;
- break;
- }
-
- MicroSecondDelay (NVME_CMD_WAIT);
- Timer += NVME_CMD_WAIT;
- }
-
- Nvme->CqHdbl[Qid].Cqh++;
- if (Nvme->CqHdbl[Qid].Cqh == CqSize) {
- Nvme->CqHdbl[Qid].Cqh = 0;
- Nvme->Pt[Qid] ^= 1;
- }
-
- ///
- /// Copy the Respose Queue entry for this command to the callers response Buffer
- ///
- CopyMem (Packet->NvmeResponse, Cq, sizeof(NVM_EXPRESS_RESPONSE));
-
- if (!EFI_ERROR(Status)) { // We still need to check CQ status if no timeout error occured
- Status = NvmeCheckCqStatus (Cq);
- }
- NVME_SET_CQHDBL (Nvme, Qid, &Nvme->CqHdbl[Qid]);
-
-EXIT:
- return Status;
-}
-
-/**
- Get identify controller Data.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer used to store the identify controller Data.
-
- @return EFI_SUCCESS - Successfully get the identify controller Data.
- @return others - Fail to get the identify controller Data.
-
-**/
-STATIC
-EFI_STATUS
-NvmeIdentifyController (
- IN NVME_CONTEXT *Nvme,
- IN VOID *Buffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- //
- // According to Nvm Express 1.1 spec Figure 38, When not used, the field shall be cleared to 0h.
- // For the Identify command, the Namespace Identifier is only used for the Namespace Data structure.
- //
- Command.Nsid = 0;
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
- CommandPacket.TransferLength = sizeof (NVME_ADMIN_CONTROLLER_DATA);
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
- //
- // Set bit 0 (Cns bit) to 1 to identify a controller
- //
- Command.Cdw10 = 1;
- Command.Flags = CDW10_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Get specified identify namespace Data.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - The specified namespace identifier.
- @param[in] Buffer - The Buffer used to store the identify namespace Data.
-
- @return EFI_SUCCESS - Successfully get the identify namespace Data.
- @return others - Fail to get the identify namespace Data.
-
-**/
-STATIC
-EFI_STATUS
-NvmeIdentifyNamespace (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN VOID *Buffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- Command.Nsid = NamespaceId;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
- CommandPacket.TransferLength = sizeof (NVME_ADMIN_NAMESPACE_DATA);
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
- //
- // Set bit 0 (Cns bit) to 1 to identify a namespace
- //
- CommandPacket.NvmeCmd->Cdw10 = 0;
- CommandPacket.NvmeCmd->Flags = CDW10_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NamespaceId,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Get Block Size for specific namespace of NVME.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return - Block Size in bytes
-
-**/
-STATIC
-UINT32
-NvmeGetBlockSize (
- IN NVME_CONTEXT *Nvme
- )
-{
- UINT32 BlockSize;
- UINT32 Lbads;
- UINT32 Flbas;
- UINT32 LbaFmtIdx;
-
- Flbas = Nvme->NamespaceData->Flbas;
- LbaFmtIdx = Flbas & 3;
- Lbads = Nvme->NamespaceData->LbaFormat[LbaFmtIdx].Lbads;
-
- BlockSize = (UINT32)1 << Lbads;
- return BlockSize;
-}
-
-/**
- Get last LBA for specific namespace of NVME.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return - Last LBA address
-
-**/
-STATIC
-EFI_LBA
-NvmeGetLastLba (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_LBA LastBlock;
- LastBlock = Nvme->NamespaceData->Nsze - 1;
- return LastBlock;
-}
-
-/**
- Create io completion queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully create io completion queue.
- @return others - Fail to create io completion queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeCreateIoCompletionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_CRIOCQ CrIoCq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&CrIoCq, sizeof(NVME_ADMIN_CRIOCQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_CRIOCQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- CrIoCq.Qid = NVME_IO_QUEUE;
- CrIoCq.Qsize = NVME_CCQ_SIZE;
- CrIoCq.Pc = 1;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoCq, sizeof (NVME_ADMIN_CRIOCQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Create io submission queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to create io submission queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeCreateIoSubmissionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_CRIOSQ CrIoSq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&CrIoSq, sizeof(NVME_ADMIN_CRIOSQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_CRIOSQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- CrIoSq.Qid = NVME_IO_QUEUE;
- CrIoSq.Qsize = NVME_CSQ_SIZE;
- CrIoSq.Pc = 1;
- CrIoSq.Cqid = NVME_IO_QUEUE;
- CrIoSq.Qprio = 0;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoSq, sizeof (NVME_ADMIN_CRIOSQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Security send and receive commands.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
- @param[in] SecurityProtocol - Security Protocol
- @param[in] SpSpecific - Security Protocol Specific
- @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in,out] TransferBuffer - Address of Data to transfer
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to send/receive commands.
-
-**/
-EFI_STATUS
-NvmeSecuritySendReceive (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN SendCommand,
- IN UINT8 SecurityProtocol,
- IN UINT16 SpSpecific,
- IN UINTN TransferLength,
- IN OUT VOID *TransferBuffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_SECSEND SecSend;
- OACS *Oacs;
- UINT8 Opcode;
- VOID* *SecBuff;
-
- Oacs = (OACS *)&Nvme->ControllerData->Oacs;
-
- //
- // Verify security bit for Security Send/Receive commands
- //
- if (Oacs->Security == 0) {
- DEBUG ((DEBUG_ERROR, "Security command doesn't support.\n"));
- return EFI_NOT_READY;
- }
-
- SecBuff = (VOID *)(UINTN) NVME_SEC_BASE (Nvme);
-
- //
- // Actions for sending security command
- //
- if (SendCommand) {
- CopyMem (SecBuff, TransferBuffer, TransferLength);
- }
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&SecSend, sizeof(NVME_ADMIN_SECSEND));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Opcode = (UINT8)(SendCommand ? NVME_ADMIN_SECURITY_SEND_OPC : NVME_ADMIN_SECURITY_RECV_OPC);
- Command.Cdw0.Opcode = Opcode;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)SecBuff;
- CommandPacket.TransferLength = (UINT32)TransferLength;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- SecSend.Spsp = SpSpecific;
- SecSend.Secp = SecurityProtocol;
- SecSend.Tl = (UINT32)TransferLength;
-
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &SecSend, sizeof (NVME_ADMIN_SECSEND));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- //
- // Actions for receiving security command
- //
- if (!SendCommand) {
- CopyMem (TransferBuffer, SecBuff, TransferLength);
- }
-
- return Status;
-}
-
-/**
- Destroy io completion queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully destroy io completion queue.
- @return others - Fail to destroy io completion queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDestroyIoCompletionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_DEIOCQ DelIoCq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&DelIoCq, sizeof(NVME_ADMIN_DEIOCQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_DELIOCQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- DelIoCq.Qid = NVME_IO_QUEUE;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoCq, sizeof (NVME_ADMIN_DEIOCQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Destroy io submission queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully destroy io submission queue.
- @return others - Fail to destroy io submission queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDestroyIoSubmissionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_DEIOSQ DelIoSq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&DelIoSq, sizeof(NVME_ADMIN_DEIOSQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_DELIOSQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- DelIoSq.Qid = NVME_IO_QUEUE;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoSq, sizeof (NVME_ADMIN_DEIOSQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Allocate transfer-related Data struct which is used at Nvme.
-
- @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_OUT_OF_RESOURCE No enough resource.
- @retval EFI_SUCCESS Successful to allocate resource.
-
-**/
-EFI_STATUS
-EFIAPI
-NvmeAllocateResource (
- IN OUT NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS DeviceAddress;
- VOID *Base;
- VOID *Mapping;
-
- //
- // Allocate resources for DMA.
- //
- Status = IoMmuAllocateBuffer (
- EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
- &Base,
- &DeviceAddress,
- &Mapping
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
- Nvme->BaseMemMapping = Mapping;
- Nvme->BaseMem = Base;
- ZeroMem (Nvme->BaseMem, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE));
-
- DEBUG ((
- DEBUG_INFO,
- "%a() NvmeContext 0x%x\n",
- __FUNCTION__,
- Nvme->BaseMem
- ));
-
- return EFI_SUCCESS;
-}
-
-/**
- Free allocated transfer-related Data struct which is used at NVMe.
-
- @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
-
-**/
-VOID
-EFIAPI
-NvmeFreeResource (
- IN OUT NVME_CONTEXT *Nvme
- )
-{
- if (Nvme->BaseMem != NULL) {
- IoMmuFreeBuffer (
- EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
- Nvme->BaseMem,
- Nvme->BaseMemMapping
- );
- Nvme->BaseMem = NULL;
- }
-}
-
-/**
- Initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
- @retval Others - A device error occurred while initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerInit (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
- NVME_AQA Aqa;
- NVME_ASQ Asq;
- NVME_ACQ Acq;
- NVME_VER Ver;
-
- UINT32 MlBAR;
- UINT32 MuBAR;
-
- ///
- /// Update PCIE BAR0/1 for NVME device
- ///
- MlBAR = Nvme->Nbar;
- MuBAR = 0;
- PciWrite32 (Nvme->PciBase + 0x10, MlBAR); // MLBAR (BAR0)
- PciWrite32 (Nvme->PciBase + 0x14, MuBAR); // MUBAR (BAR1)
-
- ///
- /// Enable PCIE decode
- ///
- PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x6);
-
- // Version
- NVME_GET_VER (Nvme, &Ver);
- if (!(Ver.Mjr == 0x0001) && (Ver.Mnr == 0x0000)) {
- DEBUG ((DEBUG_INFO, "\n!!!\n!!! NVME Version mismatch for the implementation !!!\n!!!\n"));
- }
-
- ///
- /// Read the Controller Capabilities register and verify that the NVM command set is supported
- ///
- Status = NVME_GET_CAP (Nvme, &Nvme->Cap);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CAP fail, Status: %r\n", Status));
- goto Done;
- }
-
- if (Nvme->Cap.Css != 0x01) {
- DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: the controller doesn't support NVMe command set\n"));
- Status = EFI_UNSUPPORTED;
- goto Done;
- }
-
- ///
- /// Currently the driver only supports 4k page Size.
- ///
- if ((Nvme->Cap.Mpsmin + 12) > EFI_PAGE_SHIFT) {
- DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: only supports 4k page Size\n"));
- ASSERT (FALSE);
- Status = EFI_UNSUPPORTED;
- goto Done;
- }
-
- Nvme->Cid[0] = 0;
- Nvme->Cid[1] = 0;
-
- Nvme->Pt[0] = 0;
- Nvme->Pt[1] = 0;
-
- ZeroMem ((VOID *)(UINTN)(&(Nvme->SqTdbl[0])), sizeof (NVME_SQTDBL) * NVME_MAX_IO_QUEUES);
- ZeroMem ((VOID *)(UINTN)(&(Nvme->CqHdbl[0])), sizeof (NVME_CQHDBL) * NVME_MAX_IO_QUEUES);
-
- ZeroMem (Nvme->BaseMem, NVME_MEM_MAX_SIZE);
-
- Status = NvmeDisableController (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDisableController fail, Status: %r\n", Status));
- goto Done;
- }
-
- ///
- /// set number of entries admin submission & completion queues.
- ///
- Aqa.Asqs = NVME_ASQ_SIZE;
- Aqa.Rsvd1 = 0;
- Aqa.Acqs = NVME_ACQ_SIZE;
- Aqa.Rsvd2 = 0;
-
- ///
- /// Address of admin submission queue.
- ///
- Asq = (UINT64)(UINTN)(NVME_ASQ_BASE (Nvme) & ~0xFFF);
-
- ///
- /// Address of admin completion queue.
- ///
- Acq = (UINT64)(UINTN)(NVME_ACQ_BASE (Nvme) & ~0xFFF);
-
- ///
- /// Address of I/O submission & completion queue.
- ///
- Nvme->SqBuffer[0] = (NVME_SQ *)(UINTN)NVME_ASQ_BASE (Nvme); // NVME_ADMIN_QUEUE
- Nvme->CqBuffer[0] = (NVME_CQ *)(UINTN)NVME_ACQ_BASE (Nvme); // NVME_ADMIN_QUEUE
- Nvme->SqBuffer[1] = (NVME_SQ *)(UINTN)NVME_SQ_BASE (Nvme, 0); // NVME_IO_QUEUE
- Nvme->CqBuffer[1] = (NVME_CQ *)(UINTN)NVME_CQ_BASE (Nvme, 0); // NVME_IO_QUEUE
-
- DEBUG ((DEBUG_INFO, "Admin Submission Queue Size (Aqa.Asqs) = [%08X]\n", Aqa.Asqs));
- DEBUG ((DEBUG_INFO, "Admin Completion Queue Size (Aqa.Acqs) = [%08X]\n", Aqa.Acqs));
- DEBUG ((DEBUG_INFO, "Admin Submission Queue (SqBuffer[0]) = [%08X]\n", Nvme->SqBuffer[0]));
- DEBUG ((DEBUG_INFO, "Admin Completion Queue (CqBuffer[0]) = [%08X]\n", Nvme->CqBuffer[0]));
- DEBUG ((DEBUG_INFO, "I/O Submission Queue (SqBuffer[1]) = [%08X]\n", Nvme->SqBuffer[1]));
- DEBUG ((DEBUG_INFO, "I/O Completion Queue (CqBuffer[1]) = [%08X]\n", Nvme->CqBuffer[1]));
-
- ///
- /// Program admin queue attributes.
- ///
- Status = NVME_SET_AQA (Nvme, &Aqa);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Program admin submission queue address.
- ///
- Status = NVME_SET_ASQ (Nvme, &Asq);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Program admin completion queue address.
- ///
- Status = NVME_SET_ACQ (Nvme, &Acq);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- Status = NvmeEnableController (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Create one I/O completion queue.
- ///
- Status = NvmeCreateIoCompletionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Create one I/O Submission queue.
- ///
- Status = NvmeCreateIoSubmissionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Get current Identify Controller Data
- ///
- Nvme->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)(UINTN) NVME_CONTROL_DATA_BASE (Nvme);
- Status = NvmeIdentifyController (Nvme, Nvme->ControllerData);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Dump NvmExpress Identify Controller Data
- ///
- Nvme->ControllerData->Sn[19] = 0;
- Nvme->ControllerData->Mn[39] = 0;
- //NvmeDumpIdentifyController (Nvme->ControllerData);
-
- ///
- /// Get current Identify Namespace Data
- ///
- Nvme->NamespaceData = (NVME_ADMIN_NAMESPACE_DATA *)NVME_NAMESPACE_DATA_BASE (Nvme);
- Status = NvmeIdentifyNamespace (Nvme, Nvme->Nsid, Nvme->NamespaceData);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeIdentifyNamespace fail, Status = %r\n", Status));
- goto Done;
- }
-
- ///
- /// Dump NvmExpress Identify Namespace Data
- ///
- if (Nvme->NamespaceData->Ncap == 0) {
- DEBUG ((DEBUG_ERROR, "Invalid Namespace, Ncap: %lx\n", Nvme->NamespaceData->Ncap));
- Status = EFI_DEVICE_ERROR;
- goto Done;
- }
-
- Nvme->BlockSize = NvmeGetBlockSize (Nvme);
- Nvme->LastBlock = NvmeGetLastLba (Nvme);
-
- Nvme->State = NvmeStatusInit;
-
- return EFI_SUCCESS;
-
-Done:
- return Status;
-}
-
-/**
- Un-initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
- @retval Others - A device error occurred while un-initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerExit (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
-
- Status = EFI_SUCCESS;
- if (Nvme->State == NvmeStatusInit || Nvme->State == NvmeStatusMax) {
- ///
- /// Destroy I/O Submission queue.
- ///
- Status = NvmeDestroyIoSubmissionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDestroyIoSubmissionQueue fail, Status = %r\n", Status));
- return Status;
- }
-
- ///
- /// Destroy I/O completion queue.
- ///
- Status = NvmeDestroyIoCompletionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDestroyIoCompletionQueue fail, Status = %r\n", Status));
- return Status;
- }
-
- Status = NvmeShutdownController (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeShutdownController fail, Status: %r\n", Status));
- }
- }
-
- ///
- /// Disable PCIE decode
- ///
- PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x0);
- PciWrite32 (Nvme->PciBase + 0x10, 0); // MLBAR (BAR0)
- PciWrite32 (Nvme->PciBase + 0x14, 0); // MUBAR (BAR1)
-
- Nvme->State = NvmeStatusUnknown;
- return Status;
-}
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h deleted file mode 100644 index bd2bd5239d..0000000000 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h +++ /dev/null @@ -1,327 +0,0 @@ -/** @file
- Header file for NVMe function definitions
-
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __OPAL_PASSWORD_NVME_MODE_H__
-#define __OPAL_PASSWORD_NVME_MODE_H__
-
-
-#include "OpalNvmeReg.h"
-
-#define NVME_MAX_SECTORS 0x10000
-//
-// QueueId
-//
-#define NVME_ADMIN_QUEUE 0x00
-#define NVME_IO_QUEUE 0x01
-
-typedef struct {
- UINT8 Opcode;
- UINT8 FusedOperation;
- #define NORMAL_CMD 0x00
- #define FUSED_FIRST_CMD 0x01
- #define FUSED_SECOND_CMD 0x02
- UINT16 Cid;
-} NVME_CDW0;
-
-typedef struct {
- NVME_CDW0 Cdw0;
- UINT8 Flags;
- #define CDW10_VALID 0x01
- #define CDW11_VALID 0x02
- #define CDW12_VALID 0x04
- #define CDW13_VALID 0x08
- #define CDW14_VALID 0x10
- #define CDW15_VALID 0x20
- UINT32 Nsid;
- UINT32 Cdw10;
- UINT32 Cdw11;
- UINT32 Cdw12;
- UINT32 Cdw13;
- UINT32 Cdw14;
- UINT32 Cdw15;
-} NVM_EXPRESS_COMMAND;
-
-typedef struct {
- UINT32 Cdw0;
- UINT32 Cdw1;
- UINT32 Cdw2;
- UINT32 Cdw3;
-} NVM_EXPRESS_RESPONSE;
-
-typedef struct {
- UINT64 CommandTimeout;
- UINT64 TransferBuffer;
- UINT32 TransferLength;
- UINT64 MetadataBuffer;
- UINT32 MetadataLength;
- UINT8 QueueId;
- NVM_EXPRESS_COMMAND *NvmeCmd;
- NVM_EXPRESS_RESPONSE *NvmeResponse;
-} NVM_EXPRESS_PASS_THRU_COMMAND_PACKET;
-
-
-#pragma pack(1)
-
-// Internal fields
-typedef enum {
- NvmeStatusUnknown,
- NvmeStatusInit,
- NvmeStatusInuse,
- NvmeStatusMax,
-} NVME_STATUS;
-
-typedef struct {
- UINT32 Nbar;
- VOID *BaseMem;
- VOID *BaseMemMapping;
- BOOLEAN PollCancellation;
- UINT16 NvmeInitWaitTime;
-
- NVME_STATUS State;
- UINT8 BusID;
- UINT8 DeviceID;
- UINT8 FuncID;
- UINTN PciBase;
-
- UINT32 Nsid;
- UINT64 Nsuuid;
- UINT32 BlockSize;
- EFI_LBA LastBlock;
-
- //
- // Pointers to 4kB aligned submission & completion queues.
- //
- NVME_SQ *SqBuffer[NVME_MAX_IO_QUEUES];
- NVME_CQ *CqBuffer[NVME_MAX_IO_QUEUES];
- UINT16 Cid[NVME_MAX_IO_QUEUES];
-
- //
- // Submission and completion queue indices.
- //
- NVME_SQTDBL SqTdbl[NVME_MAX_IO_QUEUES];
- NVME_CQHDBL CqHdbl[NVME_MAX_IO_QUEUES];
- UINT8 Pt[NVME_MAX_IO_QUEUES];
-
- UINTN SqeCount[NVME_MAX_IO_QUEUES];
-
- //
- // Nvme controller capabilities
- //
- NVME_CAP Cap;
-
- //
- // pointer to identify controller Data
- //
- NVME_ADMIN_CONTROLLER_DATA *ControllerData;
- NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
-} NVME_CONTEXT;
-
-#pragma pack()
-
-/**
- Transfer MMIO Data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-NvmeMmioRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- );
-
-/**
- Transfer memory Data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-NvmeMmioWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- );
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-OpalPciWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- );
-
-/**
- Transfer MMIO data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-OpalPciRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- );
-
-/**
- Allocate transfer-related Data struct which is used at Nvme.
-
- @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_OUT_OF_RESOURCE No enough resource.
- @retval EFI_SUCCESS Successful to allocate resource.
-
-**/
-EFI_STATUS
-EFIAPI
-NvmeAllocateResource (
- IN OUT NVME_CONTEXT *Nvme
- );
-
-/**
- Free allocated transfer-related Data struct which is used at NVMe.
-
- @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
-
-**/
-VOID
-EFIAPI
-NvmeFreeResource (
- IN OUT NVME_CONTEXT *Nvme
- );
-
-/**
- Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
- both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
- I/O functionality is optional.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- ID specifies that the command packet should be sent to all valid namespaces.
- @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- UUID specifies that the command packet should be sent to all valid namespaces.
- @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
- by NamespaceId.
-
- @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
- to, or from DataBuffer.
- @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
- may retry again later.
- @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
- @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
- Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
- The NVM Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
-
-**/
-EFI_STATUS
-NvmePassThru (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN UINT64 NamespaceUuid,
- IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
- );
-
-/**
- Waits until all NVME commands completed.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All NVME commands have completed
- @retval EFI_TIMEOUT - Timeout occured
- @retval EFI_NOT_READY - Not all NVME commands have completed
- @retval others - Error occurred on device side.
-**/
-EFI_STATUS
-NvmeWaitAllComplete (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- );
-
-/**
- Initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
- @retval Others - A device error occurred while initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerInit (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Un-initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
- @retval Others - A device error occurred while un-initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerExit (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Security send and receive commands.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
- @param[in] SecurityProtocol - Security Protocol
- @param[in] SpSpecific - Security Protocol Specific
- @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in,out] TransferBuffer - Address of Data to transfer
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to send/receive commands.
-
-**/
-EFI_STATUS
-NvmeSecuritySendReceive (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN SendCommand,
- IN UINT8 SecurityProtocol,
- IN UINT16 SpSpecific,
- IN UINTN TransferLength,
- IN OUT VOID *TransferBuffer
- );
-
-#endif
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h deleted file mode 100644 index 03376b9e6c..0000000000 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h +++ /dev/null @@ -1,815 +0,0 @@ -/** @file
- Header file for Registers and Structure definitions
-
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-#ifndef __OPAL_PASSWORD_NVME_REG_H__
-#define __OPAL_PASSWORD_NVME_REG_H__
-
-//
-// PCI Header for PCIe root port configuration
-//
-#define NVME_PCIE_PCICMD 0x04
-#define NVME_PCIE_BNUM 0x18
-#define NVME_PCIE_SEC_BNUM 0x19
-#define NVME_PCIE_IOBL 0x1C
-#define NVME_PCIE_MBL 0x20
-#define NVME_PCIE_PMBL 0x24
-#define NVME_PCIE_PMBU32 0x28
-#define NVME_PCIE_PMLU32 0x2C
-#define NVME_PCIE_INTR 0x3C
-
-//
-// NVMe related definitions
-//
-#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass storage sub-class non-volatile memory.
-#define PCI_IF_NVMHCI 0x02 // mass storage programming interface NVMHCI.
-
-#define NVME_ASQ_SIZE 1 // Number of admin submission queue entries, which is 0-based
-#define NVME_ACQ_SIZE 1 // Number of admin completion queue entries, which is 0-based
-
-#define NVME_CSQ_SIZE 63 // Number of I/O submission queue entries, which is 0-based
-#define NVME_CCQ_SIZE 63 // Number of I/O completion queue entries, which is 0-based
-
-#define NVME_MAX_IO_QUEUES 2 // Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
-
-#define NVME_CSQ_DEPTH (NVME_CSQ_SIZE+1)
-#define NVME_CCQ_DEPTH (NVME_CCQ_SIZE+1)
-#define NVME_PRP_SIZE (4) // Pages of PRP list
-
-#define NVME_CONTROLLER_ID 0
-
-//
-// Time out Value for Nvme transaction execution
-//
-#define NVME_GENERIC_TIMEOUT 5000000 ///< us
-#define NVME_CMD_WAIT 100 ///< us
-#define NVME_CMD_TIMEOUT 20000000 ///< us
-
-
-
-#define NVME_MEM_MAX_SIZE \
- (( \
- 1 /* Controller Data */ + \
- 1 /* Identify Data */ + \
- 1 /* ASQ */ + \
- 1 /* ACQ */ + \
- 1 /* SQs */ + \
- 1 /* CQs */ + \
- NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */ + \
- 1 /* SECURITY */ \
- ) * EFI_PAGE_SIZE)
-
-
-//
-// controller register offsets
-//
-#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
-#define NVME_VER_OFFSET 0x0008 // Version
-#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
-#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
-#define NVME_CC_OFFSET 0x0014 // Controller Configuration
-#define NVME_CSTS_OFFSET 0x001c // Controller Status
-#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
-#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
-#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
-#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
-#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
-
-//
-// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
-// Get the doorbell stride bit shift Value from the controller capabilities.
-//
-#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4 << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
-#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1) * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
-
-
-#pragma pack(1)
-
-//
-// 3.1.1 Offset 00h: CAP - Controller Capabilities
-//
-typedef struct {
- UINT16 Mqes; // Maximum Queue Entries Supported
- UINT8 Cqr:1; // Contiguous Queues Required
- UINT8 Ams:2; // Arbitration Mechanism Supported
- UINT8 Rsvd1:5;
- UINT8 To; // Timeout
- UINT16 Dstrd:4;
- UINT16 Rsvd2:1;
- UINT16 Css:4; // Command Sets Supported
- UINT16 Rsvd3:7;
- UINT8 Mpsmin:4;
- UINT8 Mpsmax:4;
- UINT8 Rsvd4;
-} NVME_CAP;
-
-//
-// 3.1.2 Offset 08h: VS - Version
-//
-typedef struct {
- UINT16 Mnr; // Minor version number
- UINT16 Mjr; // Major version number
-} NVME_VER;
-
-//
-// 3.1.5 Offset 14h: CC - Controller Configuration
-//
-typedef struct {
- UINT16 En:1; // Enable
- UINT16 Rsvd1:3;
- UINT16 Css:3; // Command Set Selected
- UINT16 Mps:4; // Memory Page Size
- UINT16 Ams:3; // Arbitration Mechanism Selected
- UINT16 Shn:2; // Shutdown Notification
- UINT8 Iosqes:4; // I/O Submission Queue Entry Size
- UINT8 Iocqes:4; // I/O Completion Queue Entry Size
- UINT8 Rsvd2;
-} NVME_CC;
-
-//
-// 3.1.6 Offset 1Ch: CSTS - Controller Status
-//
-typedef struct {
- UINT32 Rdy:1; // Ready
- UINT32 Cfs:1; // Controller Fatal Status
- UINT32 Shst:2; // Shutdown Status
- UINT32 Nssro:1; // NVM Subsystem Reset Occurred
- UINT32 Rsvd1:27;
-} NVME_CSTS;
-
-//
-// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
-//
-typedef struct {
- UINT16 Asqs:12; // Submission Queue Size
- UINT16 Rsvd1:4;
- UINT16 Acqs:12; // Completion Queue Size
- UINT16 Rsvd2:4;
-} NVME_AQA;
-
-//
-// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
-//
-#define NVME_ASQ UINT64
-
-//
-// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
-//
-#define NVME_ACQ UINT64
-
-//
-// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
-//
-typedef struct {
- UINT16 Sqt;
- UINT16 Rsvd1;
-} NVME_SQTDBL;
-
-//
-// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL - Completion Queue y Head Doorbell
-//
-typedef struct {
- UINT16 Cqh;
- UINT16 Rsvd1;
-} NVME_CQHDBL;
-
-//
-// NVM command set structures
-//
-// Read Command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting Sector Address */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Sectors */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Af:4; /* Access Frequency */
- UINT32 Al:2; /* Access Latency */
- UINT32 Sr:1; /* Sequential Request */
- UINT32 In:1; /* Incompressible */
- UINT32 Rsvd2:24;
- //
- // CDW 14
- //
- UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Elbat; /* Expected Logical Block Application Tag */
- UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
-} NVME_READ;
-
-//
-// Write Command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting Sector Address */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Sectors */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Af:4; /* Access Frequency */
- UINT32 Al:2; /* Access Latency */
- UINT32 Sr:1; /* Sequential Request */
- UINT32 In:1; /* Incompressible */
- UINT32 Rsvd2:24;
- //
- // CDW 14
- //
- UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Lbat; /* Logical Block Application Tag */
- UINT16 Lbatm; /* Logical Block Application Tag Mask */
-} NVME_WRITE;
-
-//
-// Flush
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Flush; /* Flush */
-} NVME_FLUSH;
-
-//
-// Write Uncorrectable command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT32 Nlb:16; /* Number of Logical Blocks */
- UINT32 Rsvd1:16;
-} NVME_WRITE_UNCORRECTABLE;
-
-//
-// Write Zeroes command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Logical Blocks */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Rsvd2;
- //
- // CDW 14
- //
- UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Lbat; /* Logical Block Application Tag */
- UINT16 Lbatm; /* Logical Block Application Tag Mask */
-} NVME_WRITE_ZEROES;
-
-//
-// Compare command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Logical Blocks */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Rsvd2;
- //
- // CDW 14
- //
- UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Elbat; /* Expected Logical Block Application Tag */
- UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
-} NVME_COMPARE;
-
-typedef union {
- NVME_READ Read;
- NVME_WRITE Write;
- NVME_FLUSH Flush;
- NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
- NVME_WRITE_ZEROES WriteZeros;
- NVME_COMPARE Compare;
-} NVME_CMD;
-
-typedef struct {
- UINT16 Mp; /* Maximum Power */
- UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Mps:1; /* Max Power Scale */
- UINT8 Nops:1; /* Non-Operational State */
- UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Enlat; /* Entry Latency */
- UINT32 Exlat; /* Exit Latency */
- UINT8 Rrt:5; /* Relative Read Throughput */
- UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rrl:5; /* Relative Read Leatency */
- UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rwt:5; /* Relative Write Throughput */
- UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rwl:5; /* Relative Write Leatency */
- UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_PSDESCRIPTOR;
-
-//
-// Identify Controller Data
-//
-typedef struct {
- //
- // Controller Capabilities and Features 0-255
- //
- UINT16 Vid; /* PCI Vendor ID */
- UINT16 Ssvid; /* PCI sub-system vendor ID */
- UINT8 Sn[20]; /* Produce serial number */
-
- UINT8 Mn[40]; /* Proeduct model number */
- UINT8 Fr[8]; /* Firmware Revision */
- UINT8 Rab; /* Recommended Arbitration Burst */
- UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
- UINT8 Cmic; /* Multi-interface Capabilities */
- UINT8 Mdts; /* Maximum Data Transfer Size */
- UINT8 Cntlid[2]; /* Controller ID */
- UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // Admin Command Set Attributes
- //
- UINT16 Oacs; /* Optional Admin Command Support */
- UINT8 Acl; /* Abort Command Limit */
- UINT8 Aerl; /* Async Event Request Limit */
- UINT8 Frmw; /* Firmware updates */
- UINT8 Lpa; /* Log Page Attributes */
- UINT8 Elpe; /* Error Log Page Entries */
- UINT8 Npss; /* Number of Power States Support */
- UINT8 Avscc; /* Admin Vendor Specific Command Configuration */
- UINT8 Apsta; /* Autonomous Power State Transition Attributes */
- UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // NVM Command Set Attributes
- //
- UINT8 Sqes; /* Submission Queue Entry Size */
- UINT8 Cqes; /* Completion Queue Entry Size */
- UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Nn; /* Number of Namespaces */
- UINT16 Oncs; /* Optional NVM Command Support */
- UINT16 Fuses; /* Fused Operation Support */
- UINT8 Fna; /* Format NVM Attributes */
- UINT8 Vwc; /* Volatile Write Cache */
- UINT16 Awun; /* Atomic Write Unit Normal */
- UINT16 Awupf; /* Atomic Write Unit Power Fail */
- UINT8 Nvscc; /* NVM Vendor Specific Command Configuration */
- UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
- UINT16 Acwu; /* Atomic Compare & Write Unit */
- UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Sgls; /* SGL Support */
- UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // I/O Command set Attributes
- //
- UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // Power State Descriptors
- //
- NVME_PSDESCRIPTOR PsDescriptor[32];
-
- UINT8 VendorData[1024]; /* Vendor specific Data */
-} NVME_ADMIN_CONTROLLER_DATA;
-
-typedef struct {
- UINT16 Security : 1; /* supports security send/receive commands */
- UINT16 Format : 1; /* supports format nvm command */
- UINT16 Firmware : 1; /* supports firmware activate/download commands */
- UINT16 Oacs_rsvd : 13;
- } OACS; // optional admin command support: NVME_ADMIN_CONTROLLER_DATA.Oacs
-
-typedef struct {
- UINT16 Ms; /* Metadata Size */
- UINT8 Lbads; /* LBA Data Size */
- UINT8 Rp:2; /* Relative Performance */
- #define LBAF_RP_BEST 00b
- #define LBAF_RP_BETTER 01b
- #define LBAF_RP_GOOD 10b
- #define LBAF_RP_DEGRADED 11b
- UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_LBAFORMAT;
-
-//
-// Identify Namespace Data
-//
-typedef struct {
- //
- // NVM Command Set Specific
- //
- UINT64 Nsze; /* Namespace Size (total number of blocks in formatted namespace) */
- UINT64 Ncap; /* Namespace Capacity (max number of logical blocks) */
- UINT64 Nuse; /* Namespace Utilization */
- UINT8 Nsfeat; /* Namespace Features */
- UINT8 Nlbaf; /* Number of LBA Formats */
- UINT8 Flbas; /* Formatted LBA Size */
- UINT8 Mc; /* Metadata Capabilities */
- UINT8 Dpc; /* End-to-end Data Protection capabilities */
- UINT8 Dps; /* End-to-end Data Protection Type Settings */
- UINT8 Nmic; /* Namespace Multi-path I/O and Namespace Sharing Capabilities */
- UINT8 Rescap; /* Reservation Capabilities */
- UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
- UINT64 Eui64; /* IEEE Extended Unique Identifier */
- //
- // LBA Format
- //
- NVME_LBAFORMAT LbaFormat[16];
-
- UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 VendorData[3712]; /* Vendor specific Data */
-} NVME_ADMIN_NAMESPACE_DATA;
-
-//
-// NvmExpress Admin Identify Cmd
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Cns:2;
- UINT32 Rsvd1:30;
-} NVME_ADMIN_IDENTIFY;
-
-//
-// NvmExpress Admin Create I/O Completion Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Qid:16; /* Queue Identifier */
- UINT32 Qsize:16; /* Queue Size */
-
- //
- // CDW 11
- //
- UINT32 Pc:1; /* Physically Contiguous */
- UINT32 Ien:1; /* Interrupts Enabled */
- UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
- UINT32 Iv:16; /* Interrupt Vector */
-} NVME_ADMIN_CRIOCQ;
-
-//
-// NvmExpress Admin Create I/O Submission Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Qid:16; /* Queue Identifier */
- UINT32 Qsize:16; /* Queue Size */
-
- //
- // CDW 11
- //
- UINT32 Pc:1; /* Physically Contiguous */
- UINT32 Qprio:2; /* Queue Priority */
- UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Cqid:16; /* Completion Queue ID */
-} NVME_ADMIN_CRIOSQ;
-
-//
-// NvmExpress Admin Delete I/O Completion Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT16 Qid;
- UINT16 Rsvd1;
-} NVME_ADMIN_DEIOCQ;
-
-//
-// NvmExpress Admin Delete I/O Submission Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT16 Qid;
- UINT16 Rsvd1;
-} NVME_ADMIN_DEIOSQ;
-
-//
-// NvmExpress Admin Security Send
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Resv:8; /* Reserve */
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
-
- //
- // CDW 11
- //
- UINT32 Tl; /* Transfer Length */
-} NVME_ADMIN_SECSEND;
-
-//
-// NvmExpress Admin Abort Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Sqid:16; /* Submission Queue identifier */
- UINT32 Cid:16; /* Command Identifier */
-} NVME_ADMIN_ABORT;
-
-//
-// NvmExpress Admin Firmware Activate Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fs:3; /* Submission Queue identifier */
- UINT32 Aa:2; /* Command Identifier */
- UINT32 Rsvd1:27;
-} NVME_ADMIN_FIRMWARE_ACTIVATE;
-
-//
-// NvmExpress Admin Firmware Image Download Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Numd; /* Number of Dwords */
- //
- // CDW 11
- //
- UINT32 Ofst; /* Offset */
-} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
-
-//
-// NvmExpress Admin Get Features Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fid:8; /* Feature Identifier */
- UINT32 Sel:3; /* Select */
- UINT32 Rsvd1:21;
-} NVME_ADMIN_GET_FEATURES;
-
-//
-// NvmExpress Admin Get Log Page Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Lid:8; /* Log Page Identifier */
- #define LID_ERROR_INFO
- #define LID_SMART_INFO
- #define LID_FW_SLOT_INFO
- UINT32 Rsvd1:8;
- UINT32 Numd:12; /* Number of Dwords */
- UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_ADMIN_GET_LOG_PAGE;
-
-//
-// NvmExpress Admin Set Features Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fid:8; /* Feature Identifier */
- UINT32 Rsvd1:23;
- UINT32 Sv:1; /* Save */
-} NVME_ADMIN_SET_FEATURES;
-
-//
-// NvmExpress Admin Format NVM Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Lbaf:4; /* LBA Format */
- UINT32 Ms:1; /* Metadata Settings */
- UINT32 Pi:3; /* Protection Information */
- UINT32 Pil:1; /* Protection Information Location */
- UINT32 Ses:3; /* Secure Erase Settings */
- UINT32 Rsvd1:20;
-} NVME_ADMIN_FORMAT_NVM;
-
-//
-// NvmExpress Admin Security Receive Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Rsvd1:8;
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
- //
- // CDW 11
- //
- UINT32 Al; /* Allocation Length */
-} NVME_ADMIN_SECURITY_RECEIVE;
-
-//
-// NvmExpress Admin Security Send Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Rsvd1:8;
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
- //
- // CDW 11
- //
- UINT32 Tl; /* Transfer Length */
-} NVME_ADMIN_SECURITY_SEND;
-
-typedef union {
- NVME_ADMIN_IDENTIFY Identify;
- NVME_ADMIN_CRIOCQ CrIoCq;
- NVME_ADMIN_CRIOSQ CrIoSq;
- NVME_ADMIN_DEIOCQ DeIoCq;
- NVME_ADMIN_DEIOSQ DeIoSq;
- NVME_ADMIN_ABORT Abort;
- NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
- NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD FirmwareImageDownload;
- NVME_ADMIN_GET_FEATURES GetFeatures;
- NVME_ADMIN_GET_LOG_PAGE GetLogPage;
- NVME_ADMIN_SET_FEATURES SetFeatures;
- NVME_ADMIN_FORMAT_NVM FormatNvm;
- NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
- NVME_ADMIN_SECURITY_SEND SecuritySend;
-} NVME_ADMIN_CMD;
-
-typedef struct {
- UINT32 Cdw10;
- UINT32 Cdw11;
- UINT32 Cdw12;
- UINT32 Cdw13;
- UINT32 Cdw14;
- UINT32 Cdw15;
-} NVME_RAW;
-
-typedef union {
- NVME_ADMIN_CMD Admin; // Union of Admin commands
- NVME_CMD Nvm; // Union of Nvm commands
- NVME_RAW Raw;
-} NVME_PAYLOAD;
-
-//
-// Submission Queue
-//
-typedef struct {
- //
- // CDW 0, Common to all comnmands
- //
- UINT8 Opc; // Opcode
- UINT8 Fuse:2; // Fused Operation
- UINT8 Rsvd1:5;
- UINT8 Psdt:1; // PRP or SGL for Data Transfer
- UINT16 Cid; // Command Identifier
-
- //
- // CDW 1
- //
- UINT32 Nsid; // Namespace Identifier
-
- //
- // CDW 2,3
- //
- UINT64 Rsvd2;
-
- //
- // CDW 4,5
- //
- UINT64 Mptr; // Metadata Pointer
-
- //
- // CDW 6-9
- //
- UINT64 Prp[2]; // First and second PRP entries
-
- NVME_PAYLOAD Payload;
-
-} NVME_SQ;
-
-//
-// Completion Queue
-//
-typedef struct {
- //
- // CDW 0
- //
- UINT32 Dword0;
- //
- // CDW 1
- //
- UINT32 Rsvd1;
- //
- // CDW 2
- //
- UINT16 Sqhd; // Submission Queue Head Pointer
- UINT16 Sqid; // Submission Queue Identifier
- //
- // CDW 3
- //
- UINT16 Cid; // Command Identifier
- UINT16 Pt:1; // Phase Tag
- UINT16 Sc:8; // Status Code
- UINT16 Sct:3; // Status Code Type
- UINT16 Rsvd2:2;
- UINT16 Mo:1; // More
- UINT16 Dnr:1; // Retry
-} NVME_CQ;
-
-//
-// Nvm Express Admin cmd opcodes
-//
-#define NVME_ADMIN_DELIOSQ_OPC 0
-#define NVME_ADMIN_CRIOSQ_OPC 1
-#define NVME_ADMIN_DELIOCQ_OPC 4
-#define NVME_ADMIN_CRIOCQ_OPC 5
-#define NVME_ADMIN_IDENTIFY_OPC 6
-#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
-#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
-
-#define NVME_IO_FLUSH_OPC 0
-#define NVME_IO_WRITE_OPC 1
-#define NVME_IO_READ_OPC 2
-
-//
-// Offset from the beginning of private Data queue Buffer
-//
-#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
-
-#pragma pack()
-
-#endif
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h index e10146e466..f9fdb64137 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h @@ -1,7 +1,7 @@ /** @file
Opal Password common header file.
-Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2018 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -30,38 +30,15 @@ typedef struct { } OPAL_PCI_DEVICE;
typedef struct {
- UINT16 Length;
- OPAL_PCI_DEVICE Device;
- UINT8 PasswordLength;
- UINT8 Password[OPAL_MAX_PASSWORD_SIZE];
- UINT16 OpalBaseComId;
- UINT32 BarAddr;
-} OPAL_DEVICE_COMMON;
-
-#define OPAL_DEVICE_ATA_GUID { 0xcb934fe1, 0xb8cd, 0x46b1, { 0xa0, 0x58, 0xdd, 0xcb, 0x7, 0xb7, 0xb4, 0x17 } }
-
-typedef struct {
- UINT16 Length;
- OPAL_PCI_DEVICE Device;
- UINT8 PasswordLength;
- UINT8 Password[OPAL_MAX_PASSWORD_SIZE];
- UINT16 OpalBaseComId;
- UINT32 BarAddr;
- UINT16 Port;
- UINT16 PortMultiplierPort;
-} OPAL_DEVICE_ATA;
-
-#define OPAL_DEVICE_NVME_GUID { 0xde116925, 0xaf7f, 0x42d9, { 0x83, 0xc0, 0x7e, 0xd6, 0x26, 0x59, 0x0, 0xfb } }
-
-typedef struct {
- UINT16 Length;
- OPAL_PCI_DEVICE Device;
- UINT8 PasswordLength;
- UINT8 Password[OPAL_MAX_PASSWORD_SIZE];
- UINT16 OpalBaseComId;
- UINT32 BarAddr;
- UINT32 NvmeNamespaceId;
- OPAL_PCI_DEVICE PciBridgeNode[0];
-} OPAL_DEVICE_NVME;
+ UINT32 Length;
+ OPAL_PCI_DEVICE Device;
+ UINT8 PasswordLength;
+ UINT8 Password[OPAL_MAX_PASSWORD_SIZE];
+ UINT16 OpalBaseComId;
+ UINT32 DevicePathLength;
+ EFI_DEVICE_PATH_PROTOCOL DevicePath[];
+} OPAL_DEVICE_LOCKBOX_DATA;
+
+#define OPAL_DEVICE_LOCKBOX_GUID { 0x56a77f0d, 0x6f05, 0x4d47, { 0xb9, 0x11, 0x4f, 0xd, 0xec, 0x5c, 0x58, 0x61 } }
#endif // _OPAL_PASSWORD_COMMON_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf index 11e58b95cd..2e343a4707 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf @@ -4,7 +4,7 @@ # This module is used to Management the Opal feature
# for Opal supported devices.
#
-# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -62,7 +62,6 @@ TcgStorageOpalLib
Tcg2PhysicalPresenceLib
PciLib
- S3BootScriptLib
LockBoxLib
[Protocols]
@@ -73,7 +72,8 @@ gEfiBlockIoProtocolGuid ## CONSUMES
[Guids]
- gEfiEndOfDxeEventGroupGuid ## CONSUMES ## Event
+ gEfiEndOfDxeEventGroupGuid ## CONSUMES ## Event
+ gS3StorageDeviceInitListGuid ## SOMETIMES_PRODUCES ## UNDEFINED
[Pcd]
gEfiSecurityPkgTokenSpaceGuid.PcdSkipOpalDxeUnlock ## CONSUMES
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c index edb47ca8bc..934c65bcee 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c @@ -1,7 +1,7 @@ /** @file
Opal Password PEI driver which is used to unlock Opal Password for S3.
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -14,250 +14,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "OpalPasswordPei.h"
-EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
-EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
+EFI_GUID mOpalDeviceLockBoxGuid = OPAL_DEVICE_LOCKBOX_GUID;
-#define OPAL_PCIE_ROOTPORT_SAVESIZE (0x40)
-#define STORE_INVALID_ROOTPORT_INDEX ((UINT8) -1)
-
-/**
- Get IOMMU PPI.
-
- @return Pointer to IOMMU PPI.
-
-**/
-EDKII_IOMMU_PPI *
-GetIoMmu (
- VOID
- )
-{
- EFI_STATUS Status;
- EDKII_IOMMU_PPI *IoMmu;
-
- IoMmu = NULL;
- Status = PeiServicesLocatePpi (
- &gEdkiiIoMmuPpiGuid,
- 0,
- NULL,
- (VOID **) &IoMmu
- );
- if (!EFI_ERROR (Status) && (IoMmu != NULL)) {
- return IoMmu;
- }
-
- return NULL;
-}
-
-/**
- Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
- OperationBusMasterCommonBuffer64 mapping.
-
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the
- allocated range.
- @param DeviceAddress The resulting map address for the bus master PCI controller to use to
- access the hosts HostAddress.
- @param Mapping A resulting value to pass to Unmap().
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE and MEMORY_CACHED.
- @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-IoMmuAllocateBuffer (
- IN UINTN Pages,
- OUT VOID **HostAddress,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- )
-{
- EFI_STATUS Status;
- UINTN NumberOfBytes;
- EFI_PHYSICAL_ADDRESS HostPhyAddress;
- EDKII_IOMMU_PPI *IoMmu;
-
- *HostAddress = NULL;
- *DeviceAddress = 0;
- *Mapping = NULL;
-
- IoMmu = GetIoMmu ();
-
- if (IoMmu != NULL) {
- Status = IoMmu->AllocateBuffer (
- IoMmu,
- EfiBootServicesData,
- Pages,
- HostAddress,
- 0
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
- Status = IoMmu->Map (
- IoMmu,
- EdkiiIoMmuOperationBusMasterCommonBuffer,
- *HostAddress,
- &NumberOfBytes,
- DeviceAddress,
- Mapping
- );
- if (EFI_ERROR (Status)) {
- IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
- *HostAddress = NULL;
- return EFI_OUT_OF_RESOURCES;
- }
- Status = IoMmu->SetAttribute (
- IoMmu,
- *Mapping,
- EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
- );
- if (EFI_ERROR (Status)) {
- IoMmu->Unmap (IoMmu, *Mapping);
- IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
- *Mapping = NULL;
- *HostAddress = NULL;
- return Status;
- }
- } else {
- Status = PeiServicesAllocatePages (
- EfiBootServicesData,
- Pages,
- &HostPhyAddress
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- *HostAddress = (VOID *) (UINTN) HostPhyAddress;
- *DeviceAddress = HostPhyAddress;
- *Mapping = NULL;
- }
- return Status;
-}
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
- @param Mapping The mapping value returned from Map().
-
-**/
-VOID
-IoMmuFreeBuffer (
- IN UINTN Pages,
- IN VOID *HostAddress,
- IN VOID *Mapping
- )
-{
- EDKII_IOMMU_PPI *IoMmu;
-
- IoMmu = GetIoMmu ();
-
- if (IoMmu != NULL) {
- IoMmu->SetAttribute (IoMmu, Mapping, 0);
- IoMmu->Unmap (IoMmu, Mapping);
- IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
- } else {
- PeiServicesFreePages (
- (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress,
- Pages
- );
- }
-}
-
-/**
- Provide IO action support.
-
- @param[in] PeiDev The opal device need to perform trusted IO.
- @param[in] IoType OPAL_IO_TYPE indicating whether to perform a Trusted Send or Trusted Receive.
- @param[in] SecurityProtocol Security Protocol
- @param[in] SpSpecific Security Protocol Specific
- @param[in] TransferLength Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in] Buffer Address of Data to transfer
-
- @retval EFI_SUCCESS Perform the IO action success.
- @retval Others Perform the IO action failed.
-
-**/
-EFI_STATUS
-PerformTrustedIo (
- OPAL_PEI_DEVICE *PeiDev,
- OPAL_IO_TYPE IoType,
- UINT8 SecurityProtocol,
- UINT16 SpSpecific,
- UINTN TransferLength,
- VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINTN BufferSizeBlocks;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
- OPAL_DEVICE_ATA *DevInfoAta;
- AHCI_CONTEXT *AhciContext;
- NVME_CONTEXT *NvmeContext;
-
- Status = EFI_DEVICE_ERROR;
- if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_ATA) {
- DevInfoAta = (OPAL_DEVICE_ATA *) PeiDev->Device;
- AhciContext = (AHCI_CONTEXT *) PeiDev->Context;
-
- BufferSizeBlocks = TransferLength / 512;
-
- ZeroMem( &AtaCommandBlock, sizeof( EFI_ATA_COMMAND_BLOCK ) );
- AtaCommandBlock.AtaCommand = ( IoType == OpalSend ) ? ATA_COMMAND_TRUSTED_SEND : ATA_COMMAND_TRUSTED_RECEIVE;
- AtaCommandBlock.AtaSectorCount = ( UINT8 )BufferSizeBlocks;
- AtaCommandBlock.AtaSectorNumber = ( UINT8 )( BufferSizeBlocks >> 8 );
- AtaCommandBlock.AtaFeatures = SecurityProtocol;
- AtaCommandBlock.AtaCylinderLow = ( UINT8 )( SpSpecific >> 8 );
- AtaCommandBlock.AtaCylinderHigh = ( UINT8 )( SpSpecific );
- AtaCommandBlock.AtaDeviceHead = ATA_DEVICE_LBA;
-
-
- ZeroMem( AhciContext->Buffer, HDD_PAYLOAD );
- ASSERT( TransferLength <= HDD_PAYLOAD );
-
- if (IoType == OpalSend) {
- CopyMem( AhciContext->Buffer, Buffer, TransferLength );
- }
-
- Status = AhciPioTransfer(
- AhciContext,
- (UINT8) DevInfoAta->Port,
- (UINT8) DevInfoAta->PortMultiplierPort,
- NULL,
- 0,
- ( IoType == OpalSend ) ? FALSE : TRUE, // i/o direction
- &AtaCommandBlock,
- NULL,
- AhciContext->Buffer,
- (UINT32)TransferLength,
- ATA_TIMEOUT
- );
-
- if (IoType == OpalRecv) {
- CopyMem( Buffer, AhciContext->Buffer, TransferLength );
- }
- } else if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- NvmeContext = (NVME_CONTEXT *) PeiDev->Context;
- Status = NvmeSecuritySendReceive (
- NvmeContext,
- IoType == OpalSend,
- SecurityProtocol,
- SwapBytes16(SpSpecific),
- TransferLength,
- Buffer
- );
- } else {
- DEBUG((DEBUG_ERROR, "DeviceType(%x) not support.\n", PeiDev->DeviceType));
- }
-
- return Status;
-}
/**
Send a security protocol command to a device that receives data and/or the result
@@ -351,14 +109,16 @@ SecurityReceiveData ( return EFI_DEVICE_ERROR;
}
- return PerformTrustedIo (
- PeiDev,
- OpalRecv,
- SecurityProtocolId,
- SecurityProtocolSpecificData,
- PayloadBufferSize,
- PayloadBuffer
- );
+ return PeiDev->SscPpi->ReceiveData (
+ PeiDev->SscPpi,
+ PeiDev->DeviceIndex,
+ SSC_PPI_GENERIC_TIMEOUT,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ PayloadBufferSize,
+ PayloadBuffer,
+ PayloadTransferSize
+ );
}
/**
@@ -441,111 +201,15 @@ SecuritySendData ( return EFI_DEVICE_ERROR;
}
- return PerformTrustedIo (
- PeiDev,
- OpalSend,
- SecurityProtocolId,
- SecurityProtocolSpecificData,
- PayloadBufferSize,
- PayloadBuffer
- );
-
-}
-
-/**
- Save/Restore RootPort configuration space.
-
- @param[in] DevInfoNvme Pointer to NVMe device info.
- @param[in] SaveAction TRUE: Save, FALSE: Restore
- @param[in,out] PcieConfBufferList Configuration space data buffer for save/restore
-
- @return PCIE base address of this RootPort
-**/
-UINTN
-SaveRestoreRootportConfSpace (
- IN OPAL_DEVICE_NVME *DevInfoNvme,
- IN BOOLEAN SaveAction,
- IN OUT UINT8 **PcieConfBufferList
- )
-{
- UINTN RpBase;
- UINTN Length;
- OPAL_PCI_DEVICE *DevNode;
- UINT8 *StorePcieConfData;
- UINTN Index;
-
- Length = 0;
- Index = 0;
- RpBase = 0;
-
- while (sizeof (OPAL_DEVICE_NVME) + Length < DevInfoNvme->Length) {
- DevNode = (OPAL_PCI_DEVICE *)((UINT8*)DevInfoNvme->PciBridgeNode + Length);
- RpBase = PCI_LIB_ADDRESS (DevNode->Bus, DevNode->Device, DevNode->Function, 0x0);
-
- if (PcieConfBufferList != NULL) {
- if (SaveAction) {
- StorePcieConfData = (UINT8 *) AllocateZeroPool (OPAL_PCIE_ROOTPORT_SAVESIZE);
- ASSERT (StorePcieConfData != NULL);
- OpalPciRead (StorePcieConfData, RpBase, OPAL_PCIE_ROOTPORT_SAVESIZE);
- PcieConfBufferList[Index] = StorePcieConfData;
- } else {
- // Skip PCIe Command & Status registers
- StorePcieConfData = PcieConfBufferList[Index];
- OpalPciWrite (RpBase, StorePcieConfData, 4);
- OpalPciWrite (RpBase + 8, StorePcieConfData + 8, OPAL_PCIE_ROOTPORT_SAVESIZE - 8);
-
- FreePool (StorePcieConfData);
- }
- }
-
- Length += sizeof (OPAL_PCI_DEVICE);
- Index ++;
- }
-
- return RpBase;
-}
-
-/**
- Configure RootPort for downstream PCIe NAND devices.
-
- @param[in] RpBase - PCIe configuration space address of this RootPort
- @param[in] BusNumber - Bus number
- @param[in] MemoryBase - Memory base address
- @param[in] MemoryLength - Memory size
-
-**/
-VOID
-ConfigureRootPortForPcieNand (
- IN UINTN RpBase,
- IN UINTN BusNumber,
- IN UINT32 MemoryBase,
- IN UINT32 MemoryLength
- )
-{
- UINT32 MemoryLimit;
-
- DEBUG ((DEBUG_INFO, "ConfigureRootPortForPcieNand, BusNumber: %x, MemoryBase: %x, MemoryLength: %x\n",
- BusNumber, MemoryBase, MemoryLength));
-
- if (MemoryLength == 0) {
- MemoryLimit = MemoryBase;
- } else {
- MemoryLimit = MemoryBase + MemoryLength + 0xFFFFF; // 1M
- }
-
- ///
- /// Configue PCIE configuration space for RootPort
- ///
- PciWrite8 (RpBase + NVME_PCIE_BNUM + 1, (UINT8) BusNumber); // Secondary Bus Number registers
- PciWrite8 (RpBase + NVME_PCIE_BNUM + 2, (UINT8) BusNumber); // Subordinate Bus Number registers
- PciWrite8 (RpBase + NVME_PCIE_IOBL, 0xFF); // I/O Base registers
- PciWrite8 (RpBase + NVME_PCIE_IOBL + 1, 0x00); // I/O Limit registers
- PciWrite16 (RpBase + NVME_PCIE_MBL, (UINT16) RShiftU64 ((UINTN)MemoryBase, 16)); // Memory Base register
- PciWrite16 (RpBase + NVME_PCIE_MBL + 2, (UINT16) RShiftU64 ((UINTN)MemoryLimit, 16)); // Memory Limit register
- PciWrite16 (RpBase + NVME_PCIE_PMBL, 0xFFFF); // Prefetchable Memory Base registers
- PciWrite16 (RpBase + NVME_PCIE_PMBL + 2, 0x0000); // Prefetchable Memory Limit registers
- PciWrite32 (RpBase + NVME_PCIE_PMBU32, 0xFFFFFFFF); // Prefetchable Memory Upper Base registers
- PciWrite32 (RpBase + NVME_PCIE_PMLU32, 0x00000000); // Prefetchable Memory Upper Limit registers
+ return PeiDev->SscPpi->SendData (
+ PeiDev->SscPpi,
+ PeiDev->DeviceIndex,
+ SSC_PPI_GENERIC_TIMEOUT,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ PayloadBufferSize,
+ PayloadBuffer
+ );
}
/**
@@ -651,274 +315,137 @@ UnlockOpalPassword ( }
/**
- Unlock ATA OPAL password for S3.
+ Unlock the OPAL NVM Express and ATA devices for S3.
+
+ @param[in] SscPpi Pointer to the EDKII_PEI_STORAGE_SECURITY_CMD_PPI instance.
**/
VOID
-UnlockOpalPasswordAta (
- VOID
+UnlockOpalPasswordDevices (
+ IN EDKII_PEI_STORAGE_SECURITY_CMD_PPI *SscPpi
)
{
- EFI_STATUS Status;
- UINT8 *DevInfo;
- OPAL_DEVICE_ATA TempDevInfoAta;
- OPAL_DEVICE_ATA *DevInfoAta;
- UINTN DevInfoLengthAta;
- UINT8 Bus;
- UINT8 Device;
- UINT8 Function;
- OPAL_PEI_DEVICE OpalDev;
- UINT8 BaseClassCode;
- UINT8 SubClassCode;
- UINT8 SataCmdSt;
- AHCI_CONTEXT AhciContext;
- UINT32 AhciBar;
-
- DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+ EFI_STATUS Status;
+ UINT8 *DevInfoBuffer;
+ UINT8 DummyData;
+ OPAL_DEVICE_LOCKBOX_DATA *DevInfo;
+ UINTN DevInfoLength;
+ EFI_DEVICE_PATH_PROTOCOL *SscDevicePath;
+ UINTN SscDevicePathLength;
+ UINTN SscDeviceNum;
+ UINTN SscDeviceIndex;
+ OPAL_PEI_DEVICE OpalDev;
//
- // Get ATA OPAL device info from LockBox.
+ // Get OPAL devices info from LockBox.
//
- DevInfo = (UINT8 *) &TempDevInfoAta;
- DevInfoLengthAta = sizeof (OPAL_DEVICE_ATA);
- Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo, &DevInfoLengthAta);
+ DevInfoBuffer = &DummyData;
+ DevInfoLength = sizeof (DummyData);
+ Status = RestoreLockBox (&mOpalDeviceLockBoxGuid, DevInfoBuffer, &DevInfoLength);
if (Status == EFI_BUFFER_TOO_SMALL) {
- DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthAta));
- if (DevInfo != NULL) {
- Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo, &DevInfoLengthAta);
+ DevInfoBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLength));
+ if (DevInfoBuffer != NULL) {
+ Status = RestoreLockBox (&mOpalDeviceLockBoxGuid, DevInfoBuffer, &DevInfoLength);
}
}
- if (EFI_ERROR (Status) || (DevInfo == NULL)) {
+ if (DevInfoBuffer == NULL || DevInfoBuffer == &DummyData) {
+ return;
+ } else if (EFI_ERROR (Status)) {
+ FreePages (DevInfoBuffer, EFI_SIZE_TO_PAGES (DevInfoLength));
return;
}
- for (DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
- (UINTN) DevInfoAta < ((UINTN) DevInfo + DevInfoLengthAta);
- DevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) DevInfoAta + DevInfoAta->Length)) {
- Bus = DevInfoAta->Device.Bus;
- Device = DevInfoAta->Device.Device;
- Function = DevInfoAta->Device.Function;
-
- SataCmdSt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET));
- PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET), 0x6);
-
- BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0B));
- SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0A));
- if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
- ((SubClassCode != PCI_CLASS_MASS_STORAGE_SATADPA) && (SubClassCode != PCI_CLASS_MASS_STORAGE_RAID))) {
- DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode are not supported\n", __FUNCTION__));
- } else {
- AhciBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
- PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), DevInfoAta->BarAddr);
-
- ZeroMem (&AhciContext, sizeof (AHCI_CONTEXT));
- AhciContext.AhciBar = DevInfoAta->BarAddr;
- AhciAllocateResource (&AhciContext);
- Status = AhciModeInitialize (&AhciContext, (UINT8)DevInfoAta->Port);
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a() AhciModeInitialize() error, Status: %r\n", __FUNCTION__, Status));
- } else {
- OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
- OpalDev.Sscp.ReceiveData = SecurityReceiveData;
- OpalDev.Sscp.SendData = SecuritySendData;
- OpalDev.DeviceType = OPAL_DEVICE_TYPE_ATA;
- OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoAta;
- OpalDev.Context = &AhciContext;
-
- UnlockOpalPassword (&OpalDev);
- }
- AhciFreeResource (&AhciContext);
- PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), AhciBar);
- }
- PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET), SataCmdSt);
- }
-
- ZeroMem (DevInfo, DevInfoLengthAta);
- if ((UINTN) DevInfo != (UINTN) &TempDevInfoAta) {
- FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthAta));
- }
-
- DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
-}
-
-/**
- Unlock NVMe OPAL password for S3.
-
-**/
-VOID
-UnlockOpalPasswordNvme (
- VOID
- )
-{
- EFI_STATUS Status;
- UINT8 *DevInfo;
- OPAL_DEVICE_NVME TempDevInfoNvme;
- OPAL_DEVICE_NVME *DevInfoNvme;
- UINTN DevInfoLengthNvme;
- UINT8 Bus;
- UINT8 Device;
- UINT8 Function;
- OPAL_PEI_DEVICE OpalDev;
- UINT8 BaseClassCode;
- UINT8 SubClassCode;
- UINT8 ProgInt;
- UINT8 NvmeCmdSt;
- UINT8 *StorePcieConfDataList[16];
- UINTN RpBase;
- UINTN MemoryBase;
- UINTN MemoryLength;
- NVME_CONTEXT NvmeContext;
-
- DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
-
//
- // Get NVMe OPAL device info from LockBox.
+ // Go through all the devices managed by the SSC PPI instance.
//
- DevInfo = (UINT8 *) &TempDevInfoNvme;
- DevInfoLengthNvme = sizeof (OPAL_DEVICE_NVME);
- Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo, &DevInfoLengthNvme);
- if (Status == EFI_BUFFER_TOO_SMALL) {
- DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
- if (DevInfo != NULL) {
- Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo, &DevInfoLengthNvme);
- }
+ Status = SscPpi->GetNumberofDevices (SscPpi, &SscDeviceNum);
+ if (EFI_ERROR (Status)) {
+ goto Exit;
}
- if (EFI_ERROR (Status) || (DevInfo == NULL)) {
- return;
- }
-
- for (DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
- (UINTN) DevInfoNvme < ((UINTN) DevInfo + DevInfoLengthNvme);
- DevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) DevInfoNvme + DevInfoNvme->Length)) {
- Bus = DevInfoNvme->Device.Bus;
- Device = DevInfoNvme->Device.Device;
- Function = DevInfoNvme->Device.Function;
-
- RpBase = 0;
- NvmeCmdSt = 0;
-
- ///
- /// Save original RootPort configuration space to heap
- ///
- RpBase = SaveRestoreRootportConfSpace (
- DevInfoNvme,
- TRUE, // save
- StorePcieConfDataList
- );
- MemoryBase = DevInfoNvme->BarAddr;
- MemoryLength = 0;
- ConfigureRootPortForPcieNand (RpBase, Bus, (UINT32) MemoryBase, (UINT32) MemoryLength);
-
- ///
- /// Enable PCIE decode for RootPort
- ///
- NvmeCmdSt = PciRead8 (RpBase + NVME_PCIE_PCICMD);
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0x6);
-
- BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0B));
- SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0A));
- ProgInt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x09));
- if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
- (SubClassCode != PCI_CLASS_MASS_STORAGE_NVM) ||
- (ProgInt != PCI_IF_NVMHCI)) {
- DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode/PI are not supported\n", __FUNCTION__));
- } else {
- ZeroMem (&NvmeContext, sizeof (NVME_CONTEXT));
- NvmeContext.Nbar = DevInfoNvme->BarAddr;
- NvmeContext.PciBase = PCI_LIB_ADDRESS (Bus, Device, Function, 0x0);
- NvmeContext.NvmeInitWaitTime = 0;
- NvmeContext.Nsid = DevInfoNvme->NvmeNamespaceId;
- NvmeAllocateResource (&NvmeContext);
- Status = NvmeControllerInit (&NvmeContext);
-
- OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
- OpalDev.Sscp.ReceiveData = SecurityReceiveData;
- OpalDev.Sscp.SendData = SecuritySendData;
- OpalDev.DeviceType = OPAL_DEVICE_TYPE_NVME;
- OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoNvme;
- OpalDev.Context = &NvmeContext;
-
- UnlockOpalPassword (&OpalDev);
-
- Status = NvmeControllerExit (&NvmeContext);
- NvmeFreeResource (&NvmeContext);
+ for (SscDeviceIndex = 1; SscDeviceIndex <= SscDeviceNum; SscDeviceIndex++) {
+ Status = SscPpi->GetDevicePath (
+ SscPpi,
+ SscDeviceIndex,
+ &SscDevicePathLength,
+ &SscDevicePath
+ );
+ if (SscDevicePathLength <= sizeof (EFI_DEVICE_PATH_PROTOCOL)) {
+ //
+ // Device path validity check.
+ //
+ continue;
}
- ASSERT (RpBase != 0);
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0);
- RpBase = SaveRestoreRootportConfSpace (
- DevInfoNvme,
- FALSE, // restore
- StorePcieConfDataList
- );
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, NvmeCmdSt);
- }
-
- ZeroMem (DevInfo, DevInfoLengthNvme);
- if ((UINTN) DevInfo != (UINTN) &TempDevInfoNvme) {
- FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
+ //
+ // Search the device in the restored LockBox.
+ //
+ for (DevInfo = (OPAL_DEVICE_LOCKBOX_DATA *) DevInfoBuffer;
+ (UINTN) DevInfo < ((UINTN) DevInfoBuffer + DevInfoLength);
+ DevInfo = (OPAL_DEVICE_LOCKBOX_DATA *) ((UINTN) DevInfo + DevInfo->Length)) {
+ //
+ // Find the matching device.
+ //
+ if ((DevInfo->DevicePathLength >= SscDevicePathLength) &&
+ (CompareMem (
+ DevInfo->DevicePath,
+ SscDevicePath,
+ SscDevicePathLength - sizeof (EFI_DEVICE_PATH_PROTOCOL)) == 0)) {
+ OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
+ OpalDev.Sscp.ReceiveData = SecurityReceiveData;
+ OpalDev.Sscp.SendData = SecuritySendData;
+ OpalDev.Device = DevInfo;
+ OpalDev.Context = NULL;
+ OpalDev.SscPpi = SscPpi;
+ OpalDev.DeviceIndex = SscDeviceIndex;
+ UnlockOpalPassword (&OpalDev);
+ break;
+ }
+ }
}
- DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
-}
-
-/**
- Unlock OPAL password for S3.
+Exit:
+ ZeroMem (DevInfoBuffer, DevInfoLength);
+ FreePages (DevInfoBuffer, EFI_SIZE_TO_PAGES (DevInfoLength));
-**/
-VOID
-OpalPasswordS3 (
- VOID
- )
-{
- UnlockOpalPasswordAta ();
- UnlockOpalPasswordNvme ();
}
/**
- Entry point of the notification callback function itself within the PEIM.
+ One notified function at the installation of EDKII_PEI_STORAGE_SECURITY_CMD_PPI.
It is to unlock OPAL password for S3.
- @param PeiServices Indirect reference to the PEI Services Table.
- @param NotifyDescriptor Address of the notification descriptor data structure.
- @param Ppi Address of the PPI that was installed.
+ @param[in] PeiServices Indirect reference to the PEI Services Table.
+ @param[in] NotifyDescriptor Address of the notification descriptor data structure.
+ @param[in] Ppi Address of the PPI that was installed.
@return Status of the notification.
The status code returned from this function is ignored.
+
**/
EFI_STATUS
EFIAPI
-OpalPasswordEndOfPeiNotify(
- IN EFI_PEI_SERVICES **PeiServices,
- IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
- IN VOID *Ppi
+OpalPasswordStorageSecurityPpiNotify (
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
+ IN VOID *Ppi
)
{
- EFI_STATUS Status;
- EFI_BOOT_MODE BootMode;
-
- Status = PeiServicesGetBootMode (&BootMode);
- ASSERT_EFI_ERROR (Status);
- if (BootMode != BOOT_ON_S3_RESUME) {
- return EFI_UNSUPPORTED;
- }
-
- DEBUG ((DEBUG_INFO, "%a() - enter at S3 resume\n", __FUNCTION__));
+ DEBUG ((DEBUG_INFO, "%a entered at S3 resume!\n", __FUNCTION__));
- OpalPasswordS3 ();
+ UnlockOpalPasswordDevices ((EDKII_PEI_STORAGE_SECURITY_CMD_PPI *) Ppi);
- DEBUG ((DEBUG_INFO, "%a() - exit at S3 resume\n", __FUNCTION__));
+ DEBUG ((DEBUG_INFO, "%a exit at S3 resume!\n", __FUNCTION__));
return EFI_SUCCESS;
}
-EFI_PEI_NOTIFY_DESCRIPTOR mOpalPasswordEndOfPeiNotifyDesc = {
+
+EFI_PEI_NOTIFY_DESCRIPTOR mOpalPasswordStorageSecurityPpiNotifyDesc = {
(EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
- &gEfiEndOfPeiSignalPpiGuid,
- OpalPasswordEndOfPeiNotify
+ &gEdkiiPeiStorageSecurityCommandPpiGuid,
+ OpalPasswordStorageSecurityPpiNotify
};
+
/**
Main entry for this module.
@@ -935,10 +462,17 @@ OpalPasswordPeiInit ( IN CONST EFI_PEI_SERVICES **PeiServices
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
+ EFI_BOOT_MODE BootMode;
+
+ Status = PeiServicesGetBootMode (&BootMode);
+ if ((EFI_ERROR (Status)) || (BootMode != BOOT_ON_S3_RESUME)) {
+ return EFI_UNSUPPORTED;
+ }
- Status = PeiServicesNotifyPpi (&mOpalPasswordEndOfPeiNotifyDesc);
+ DEBUG ((DEBUG_INFO, "%a: Enters in S3 path.\n", __FUNCTION__));
+
+ Status = PeiServicesNotifyPpi (&mOpalPasswordStorageSecurityPpiNotifyDesc);
ASSERT_EFI_ERROR (Status);
return Status;
}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h index 31aab37f5d..5c1719b9b7 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h @@ -1,7 +1,7 @@ /** @file
Opal Password PEI driver which is used to unlock Opal Password for S3.
-Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -16,8 +16,6 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #define _OPAL_PASSWORD_PEI_H_
#include <PiPei.h>
-#include <IndustryStandard/Atapi.h>
-#include <IndustryStandard/Pci.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
@@ -27,107 +25,42 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include <Library/MemoryAllocationLib.h>
#include <Library/PeimEntryPoint.h>
#include <Library/PeiServicesLib.h>
-#include <Library/HobLib.h>
-#include <Library/TimerLib.h>
#include <Library/LockBoxLib.h>
#include <Library/TcgStorageOpalLib.h>
#include <Library/Tcg2PhysicalPresenceLib.h>
+#include <Library/PeiServicesTablePointerLib.h>
#include <Protocol/StorageSecurityCommand.h>
#include <Ppi/IoMmu.h>
+#include <Ppi/StorageSecurityCommand.h>
#include "OpalPasswordCommon.h"
-#include "OpalAhciMode.h"
-#include "OpalNvmeMode.h"
-//
-// Time out Value for ATA pass through protocol
-//
-#define ATA_TIMEOUT 30000000
//
-// The payload Length of HDD related ATA commands
-//
-#define HDD_PAYLOAD 512
-//
-// According to ATA spec, the max Length of hdd password is 32 bytes
+// The generic command timeout value (unit in us) for Storage Security Command
+// PPI ReceiveData/SendData services
//
-#define OPAL_PASSWORD_MAX_LENGTH 32
+#define SSC_PPI_GENERIC_TIMEOUT 30000000
#pragma pack(1)
-/**
-* Opal I/O Type utilized by the Trusted IO callback
-*
-* The type indicates if the I/O is a send or receive
-*/
-typedef enum {
- //
- // I/O is a TCG Trusted Send command
- //
- OpalSend,
-
- //
- // I/O is a TCG Trusted Receive command
- //
- OpalRecv
-} OPAL_IO_TYPE;
-
-#define OPAL_PEI_DEVICE_SIGNATURE SIGNATURE_32 ('o', 'p', 'd', 's')
+#define OPAL_PEI_DEVICE_SIGNATURE SIGNATURE_32 ('o', 'p', 'd', 's')
typedef struct {
- UINTN Signature;
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
- UINT8 DeviceType;
- OPAL_DEVICE_COMMON *Device;
- VOID *Context;
+ UINTN Signature;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
+ OPAL_DEVICE_LOCKBOX_DATA *Device;
+ VOID *Context;
+ EDKII_PEI_STORAGE_SECURITY_CMD_PPI *SscPpi;
+ UINTN DeviceIndex;
} OPAL_PEI_DEVICE;
-#define OPAL_PEI_DEVICE_FROM_THIS(a) CR (a, OPAL_PEI_DEVICE, Sscp, OPAL_PEI_DEVICE_SIGNATURE)
+#define OPAL_PEI_DEVICE_FROM_THIS(a) \
+ CR (a, OPAL_PEI_DEVICE, Sscp, OPAL_PEI_DEVICE_SIGNATURE)
#pragma pack()
-/**
- Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
- OperationBusMasterCommonBuffer64 mapping.
-
- @param Pages The number of pages to allocate.
- @param HostAddress A pointer to store the base system memory address of the
- allocated range.
- @param DeviceAddress The resulting map address for the bus master PCI controller to use to
- access the hosts HostAddress.
- @param Mapping A resulting value to pass to Unmap().
-
- @retval EFI_SUCCESS The requested memory pages were allocated.
- @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
- MEMORY_WRITE_COMBINE and MEMORY_CACHED.
- @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
- @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
-
-**/
-EFI_STATUS
-IoMmuAllocateBuffer (
- IN UINTN Pages,
- OUT VOID **HostAddress,
- OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
- OUT VOID **Mapping
- );
-
-/**
- Frees memory that was allocated with AllocateBuffer().
-
- @param Pages The number of pages to free.
- @param HostAddress The base system memory address of the allocated range.
- @param Mapping The mapping value returned from Map().
-
-**/
-VOID
-IoMmuFreeBuffer (
- IN UINTN Pages,
- IN VOID *HostAddress,
- IN VOID *Mapping
- );
-
#endif // _OPAL_PASSWORD_PEI_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf index 482b7c25af..5abfc69e80 100644 --- a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf @@ -1,7 +1,7 @@ ## @file
# This is a Opal Password PEI driver.
#
-# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2019, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -29,11 +29,6 @@ OpalPasswordPei.c
OpalPasswordPei.h
OpalPasswordCommon.h
- OpalAhciMode.c
- OpalAhciMode.h
- OpalNvmeMode.c
- OpalNvmeMode.h
- OpalNvmeReg.h
[Packages]
MdePkg/MdePkg.dec
@@ -49,14 +44,13 @@ BaseLib
BaseMemoryLib
MemoryAllocationLib
- TimerLib
LockBoxLib
TcgStorageOpalLib
Tcg2PhysicalPresenceLib
+ PeiServicesTablePointerLib
[Ppis]
- gEdkiiIoMmuPpiGuid ## SOMETIMES_CONSUMES
- gEfiEndOfPeiSignalPpiGuid ## NOTIFY
+ gEdkiiPeiStorageSecurityCommandPpiGuid ## NOTIFY
[Depex]
gEfiPeiMasterBootModePpiGuid
|