diff options
Diffstat (limited to 'Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsSata.h')
| -rw-r--r-- | Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsSata.h | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsSata.h b/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsSata.h new file mode 100644 index 0000000000..7b86de3831 --- /dev/null +++ b/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/PchRegs/PchRegsSata.h @@ -0,0 +1,251 @@ +/**
+
+Copyright (c) 2012 - 2014, Intel Corporation. All rights reserved
+
+ This program and the accompanying materials are licensed and made available under
+ the terms and conditions of the BSD License that accompanies this distribution.
+ The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php.
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+
+
+ @file
+ PchRegsSata.h
+
+ @brief
+ Register names for VLV SATA controllers
+
+ Conventions:
+
+ - Prefixes:
+ Definitions beginning with "R_" are registers
+ Definitions beginning with "B_" are bits within registers
+ Definitions beginning with "V_" are meaningful values of bits within the registers
+ Definitions beginning with "S_" are register sizes
+ Definitions beginning with "N_" are the bit position
+ - In general, PCH registers are denoted by "_PCH_" in register names
+ - Registers / bits that are different between PCH generations are denoted by
+ "_PCH_<generation_name>_" in register/bit names. e.g., "_PCH_VLV_"
+ - Registers / bits that are different between SKUs are denoted by "_<SKU_name>"
+ at the end of the register/bit names
+ - Registers / bits of new devices introduced in a PCH generation will be just named
+ as "_PCH_" without <generation_name> inserted.
+
+**/
+#ifndef _PCH_REGS_SATA_H_
+#define _PCH_REGS_SATA_H_
+
+///
+/// VLV SATA Message Bus
+///
+#define PCH_SATA_PHY_PORT_ID 0xA3 // SATA PHY Port ID
+#define PCH_SATA_PHY_MMIO_READ_OPCODE 0x00 // CUnit to SATA PHY MMIO Read Opcode
+#define PCH_SATA_PHY_MMIO_WRITE_OPCODE 0x01 // CUnit to SATA PHY MMIO Write Opcode
+
+///
+/// SATA Controller Registers (D19:F0)
+///
+#define PCI_DEVICE_NUMBER_PCH_SATA 19
+#define PCI_FUNCTION_NUMBER_PCH_SATA 0
+
+#define R_PCH_SATA_ID 0x00 // Identifiers
+#define B_PCH_SATA_ID_DID 0xFFFF0000 // Device ID
+#define B_PCH_SATA_ID_VID 0x0000FFFF // Vendor ID
+#define V_PCH_SATA_VENDOR_ID V_PCH_INTEL_VENDOR_ID
+#define V_PCH_SATA_DEVICE_ID_D_IDE 0x0F20 // Desktop IDE Mode (Ports 0 and 1)
+#define V_PCH_SATA_DEVICE_ID_D_AHCI 0x0F22 // Desktop AHCI Mode (Ports 0 and 1)
+#define V_PCH_SATA_DEVICE_ID_D_RAID 0x2822 // Desktop RAID 0/1/5/10 Mode, based on D19:F0:9Ch[7]
+
+#define V_PCH_SATA_DEVICE_ID_M_IDE 0x0F21 // Mobile IDE Mode (Ports 0 and 1)
+#define V_PCH_SATA_DEVICE_ID_M_AHCI 0x0F23 // Mobile AHCI Mode (Ports 0 and 1)
+#define V_PCH_SATA_DEVICE_ID_M_RAID 0x282A // Mobile RAID 0/1/5/10 Mode, based on D19:F0:9Ch[7]
+
+#define R_PCH_SATA_COMMAND 0x04 // Command
+#define B_PCH_SATA_COMMAND_INT_DIS BIT10 // Interrupt Disable
+#define B_PCH_SATA_COMMAND_FBE BIT9 // Fast Back-to-back Enable
+#define B_PCH_SATA_COMMAND_SERR_EN BIT8 // SERR# Enable
+#define B_PCH_SATA_COMMAND_WCC BIT7 // Wait Cycle Enable
+#define B_PCH_SATA_COMMAND_PER BIT6 // Parity Error Response Enable
+#define B_PCH_SATA_COMMAND_VPS BIT5 // VGA Palette Snooping Enable
+#define B_PCH_SATA_COMMAND_PMWE BIT4 // Memory Write and Invalidate Enable
+#define B_PCH_SATA_COMMAND_SCE BIT3 // Special Cycle Enable
+#define B_PCH_SATA_COMMAND_BME BIT2 // Bus Master Enable
+#define B_PCH_SATA_COMMAND_MSE BIT1 // Memory Space Enable
+#define B_PCH_SATA_COMMAND_IOSE BIT0 // I/O Space Enable
+
+#define R_PCH_SATA_PCISTS 0x06 // Device Status
+#define B_PCH_SATA_PCISTS_DPE BIT15 // Detected Parity Error
+#define B_PCH_SATA_PCISTS_SSE BIT14 // Signaled System Error
+#define B_PCH_SATA_PCISTS_RMA BIT13 // Received Master-Abort Status
+#define B_PCH_SATA_PCISTS_RTA BIT12 // Received Target-Abort Status
+#define B_PCH_SATA_PCISTS_STA BIT11 // Signaled Target-Abort Status
+#define B_PCH_SATA_PCISTS_DEV_STS_MASK (BIT10 | BIT9) // DEVSEL# Timing Status
+#define B_PCH_SATA_PCISTS_DPED BIT8 // Master Data Parity Error Detected
+#define B_PCH_SATA_PCISTS_CAP_LIST BIT4 // Capabilities List
+#define B_PCH_SATA_PCISTS_ITNS BIT3 // Interrupt Status
+
+#define R_PCH_SATA_RID 0x08 // Revision ID (8 bits)
+
+#define R_PCH_SATA_PI_REGISTER 0x09 // Programming Interface (8 bits)
+#define B_PCH_SATA_PI_REGISTER_SNC BIT3 // Secondary Mode Native Capable
+#define B_PCH_SATA_PI_REGISTER_SNE BIT2 // Secondary Mode Native Enable
+#define B_PCH_SATA_PI_REGISTER_PNC BIT1 // Primary Mode Native Capable
+#define B_PCH_SATA_PI_REGISTER_PNE BIT0 // Primary Mode Native Enable
+
+#define R_PCH_SATA_CC 0x0A // Class Code
+#define B_PCH_SATA_CC_BCC 0xFF00 // Base Class Code
+#define B_PCH_SATA_CC_SCC 0x00FF // Sub Class Code
+#define V_PCH_SATA_CC_SCC_IDE 0x01
+#define V_PCH_SATA_CC_SCC_AHCI 0x06
+#define V_PCH_SATA_CC_SCC_RAID 0x04
+
+#define R_PCH_SATA_CLS 0x0C // Cache Line Size (8 bits)
+#define B_PCH_SATA_CLS 0xFF
+
+#define R_PCH_SATA_MLT 0x0D // Master Latency Timer (8 bits)
+#define B_PCH_SATA_MLT 0xFF
+
+#define R_PCH_SATA_HTYPE 0x0E // Header Type
+#define B_PCH_SATA_HTYPE_MFD BIT7 // Multi-function Device
+#define B_PCH_SATA_HTYPE_HL 0x7F // Header Layout
+
+#define R_PCH_SATA_PCMD_BAR 0x10 // Primary Command Block Base Address
+#define B_PCH_SATA_PCMD_BAR_BA 0x0000FFF8 // Base Address
+#define B_PCH_SATA_PCMD_BAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_PCTL_BAR 0x14 // Primary Control Block Base Address
+#define B_PCH_SATA_PCTL_BAR_BA 0x0000FFFC // Base Address
+#define B_PCH_SATA_PCTL_BAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_SCMD_BAR 0x18 // Secondary Command Block Base Address
+#define B_PCH_SATA_SCMD_BAR_BA 0x0000FFF8 // Base Address
+#define B_PCH_SATA_SCMD_BAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_SCTL_BAR 0x1C // Secondary Control Block Base Address
+#define B_PCH_SATA_SCTL_BAR_BA 0x0000FFFC // Base Address
+#define B_PCH_SATA_SCTL_BAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_LBAR 0x20 // Legacy IDE Base Address / AHCI Index Data Pair Base Address
+#define B_PCH_SATA_LBAR_BA 0x0000FFE0 // Base Address
+#define B_PCH_SATA_LBAR_BA4 BIT4 // Base Address 4
+#define B_PCH_SATA_LBAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_SIDPBA 0x24 // Serial ATA Index Data Pair Base Address
+#define R_PCH_SATA_ABAR 0x24 // AHCI Base Address
+#define B_PCH_SATA_ABAR_BA 0xFFFFF800 // AHCI Memory Base Address (When CC.SCC not equal 0x01)
+#define V_PCH_SATA_ABAR_LENGTH 0x800 // AHCI Memory Length (When CC.SCC not equal 0x01)
+#define N_PCH_SATA_ABAR_ALIGNMENT 11 // AHCI Base Address Alignment (When CC.SCC not equal 0x01)
+#define B_PCH_SATA_SIDPBA_BA 0x0000FFF0 // Serial ATA Index Data Pair IO Base Address (When CC.SCC equal 0x01)
+#define V_PCH_SATA_SIDPBA_LENGTH 0x10 // Serial ATA Index Data Pair IO Length (When CC.SCC equal 0x01)
+#define N_PCH_SATA_SIDPBA_ALIGNMENT 4 // Serial ATA Index Data Pair Base Address Alignment (When CC.SCC not equal 0x01)
+#define B_PCH_SATA_ABAR_PF BIT3 // Prefetchable
+#define B_PCH_SATA_ABAR_TP (BIT2 | BIT1) // Type
+#define B_PCH_SATA_ABAR_RTE BIT0 // Resource Type Indicator
+
+#define R_PCH_SATA_SS 0x2C // Sub System Identifiers
+#define B_PCH_SATA_SS_SSID 0xFFFF0000 // Subsystem ID
+#define B_PCH_SATA_SS_SSVID 0x0000FFFF // Subsystem Vendor ID
+
+#define R_PCH_SATA_AHCI_CAP_PTR 0x34 // Capabilities Pointer (8 bits)
+#define B_PCH_SATA_AHCI_CAP_PTR 0xFF
+
+#define R_PCH_SATA_INTR 0x3C // Interrupt Information
+#define B_PCH_SATA_INTR_IPIN 0xFFFF0000 // Interrupt Pin
+#define B_PCH_SATA_INTR_ILINE 0x0000FFFF // Interrupt Line
+
+#define R_PCH_SATA_PMCS 0x74 // PCI Power Management Control and Status
+#define B_PCH_SATA_PMCS_PMES BIT15 // PME Status
+#define B_PCH_SATA_PMCS_PMEE BIT8 // PME Enable
+#define B_PCH_SATA_PMCS_NSFRST BIT3 // No Soft Reset
+#define V_PCH_SATA_PMCS_NSFRST_1 0x01
+#define V_PCH_SATA_PMCS_NSFRST_0 0x00
+#define B_PCH_SATA_PMCS_PS (BIT1 | BIT0) // Power State
+#define V_PCH_SATA_PMCS_PS_3 0x03
+#define V_PCH_SATA_PMCS_PS_0 0x00
+
+#define R_PCH_SATA_MAP 0x90 // Port Mapping Register
+#define B_PCH_SATA_MAP_SPD (BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8) // SATA Port Disable
+#define B_PCH_SATA_PORT6_DISABLED BIT14
+#define B_PCH_SATA_PORT5_DISABLED BIT13
+#define B_PCH_SATA_PORT4_DISABLED BIT12
+#define B_PCH_SATA_PORT3_DISABLED BIT11
+#define B_PCH_SATA_PORT2_DISABLED BIT10
+#define B_PCH_SATA_PORT1_DISABLED BIT9
+#define B_PCH_SATA_PORT0_DISABLED BIT8
+#define B_PCH_SATA_MAP_SMS_MASK (BIT7 | BIT6) // SATA Mode Select
+#define V_PCH_SATA_MAP_SMS_IDE 0x00
+#define V_PCH_SATA_MAP_SMS_AHCI 0x40
+#define V_PCH_SATA_MAP_SMS_RAID 0x80
+#define B_PCH_SATA_PORT_TO_CONTROLLER_CFG BIT5 // SATA Port-to-Controller Configuration
+
+#define R_PCH_SATA_PCS 0x92 // Port Control and Status
+#define S_PCH_SATA_PCS 0x2
+#define B_PCH_SATA_PCS_OOB_RETRY BIT15 // OOB Retry Mode
+#define B_PCH_SATA_PCS_PORT6_DET BIT14 // Port 6 Present
+#define B_PCH_SATA_PCS_PORT5_DET BIT13 // Port 5 Present
+#define B_PCH_SATA_PCS_PORT4_DET BIT12 // Port 4 Present
+#define B_PCH_SATA_PCS_PORT3_DET BIT11 // Port 3 Present
+#define B_PCH_SATA_PCS_PORT2_DET BIT10 // Port 2 Present
+#define B_PCH_SATA_PCS_PORT1_DET BIT9 // Port 1 Present
+#define B_PCH_SATA_PCS_PORT0_DET BIT8 // Port 0 Present
+#define B_PCH_SATA_PCS_PORT5_EN BIT5 // Port 5 Enabled
+#define B_PCH_SATA_PCS_PORT4_EN BIT4 // Port 4 Enabled
+#define B_PCH_SATA_PCS_PORT3_EN BIT3 // Port 3 Enabled
+#define B_PCH_SATA_PCS_PORT2_EN BIT2 // Port 2 Enabled
+#define B_PCH_SATA_PCS_PORT1_EN BIT1 // Port 1 Enabled
+#define B_PCH_SATA_PCS_PORT0_EN BIT0 // Port 0 Enabled
+
+#define R_PCH_SATA_AHCI_PI 0x0C // Ports Implemented
+#define B_PCH_SATA_PORT_MASK 0x3F
+#define B_PCH_SATA_PORT5_IMPLEMENTED BIT5 // Port 5 Implemented
+#define B_PCH_SATA_PORT4_IMPLEMENTED BIT4 // Port 4 Implemented
+#define B_PCH_SATA_PORT3_IMPLEMENTED BIT3 // Port 3 Implemented
+#define B_PCH_SATA_PORT2_IMPLEMENTED BIT2 // Port 2 Implemented
+#define B_PCH_SATA_PORT1_IMPLEMENTED BIT1 // Port 1 Implemented
+#define B_PCH_SATA_PORT0_IMPLEMENTED BIT0 // Port 0 Implemented
+
+#define R_PCH_SATA_AHCI_P0SSTS 0x128 // Port 0 Serial ATA Status
+#define R_PCH_SATA_AHCI_P1SSTS 0x1A8 // Port 1 Serial ATA Status
+#define B_PCH_SATA_AHCI_PXSSTS_IPM 0x00000F00 // Interface Power Management
+#define B_PCH_SATA_AHCI_PXSSTS_IPM_0 0x00000000
+#define B_PCH_SATA_AHCI_PXSSTS_IPM_1 0x00000100
+#define B_PCH_SATA_AHCI_PXSSTS_IPM_2 0x00000200
+#define B_PCH_SATA_AHCI_PXSSTS_IPM_6 0x00000600
+#define B_PCH_SATA_AHCI_PXSSTS_SPD 0x000000F0 // Current Interface Speed
+#define B_PCH_SATA_AHCI_PXSSTS_SPD_0 0x00000000
+#define B_PCH_SATA_AHCI_PXSSTS_SPD_1 0x00000010
+#define B_PCH_SATA_AHCI_PXSSTS_SPD_2 0x00000020
+#define B_PCH_SATA_AHCI_PXSSTS_SPD_3 0x00000030
+#define B_PCH_SATA_AHCI_PXSSTS_DET 0x0000000F // Device Detection
+#define B_PCH_SATA_AHCI_PXSSTS_DET_0 0x00000000
+#define B_PCH_SATA_AHCI_PXSSTS_DET_1 0x00000001
+#define B_PCH_SATA_AHCI_PXSSTS_DET_3 0x00000003
+#define B_PCH_SATA_AHCI_PXSSTS_DET_4 0x00000004
+
+//
+// Macros of VLV capabilities for SATA controller which are used by SATA controller driver
+//
+//
+//
+// Define the individual capabilities of each SATA controller
+//
+#define PCH_SATA_MAX_CONTROLLERS 1 // Max SATA controllers number supported
+#define PCH_SATA_MAX_DEVICES 2 // Max SATA devices number of single SATA channel
+#define PCH_IDE_MAX_CHANNELS 2 // Max IDE channels number of single SATA controller
+#define PCH_IDE_MAX_DEVICES 2 // Max IDE devices number of single SATA channel
+#define PCH_AHCI_MAX_PORTS 2 // Max number of SATA ports in VLV
+#define PCH_IDE_MAX_PORTS 2 // Max number of IDE ports in VLV
+
+//
+// GPIOS_14 SATA0GP is the SATA port 0 reset pin.
+//
+#define PCH_GPIO_SATA_PORT0_RESET 14
+//
+// GPIOS_15 SATA1GP is the SATA port 1 reset pin.
+//
+#define PCH_GPIO_SATA_PORT1_RESET 15
+
+#endif
|