summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2015-03-01 22:04:38 +0000
committerStefan Tauner <stefan.tauner@alumni.tuwien.ac.at>2015-03-01 22:04:38 +0000
commit74dc73f6907ea159c0d5d221309e266528ea6134 (patch)
tree15dba04ff8d31e6a4dce586a520311cc9e58f1d7
parentadadca66f2ce2cb03ece016ab07fef604283c667 (diff)
downloadflashrom-74dc73f6907ea159c0d5d221309e266528ea6134.tar.gz
flashrom-74dc73f6907ea159c0d5d221309e266528ea6134.tar.bz2
flashrom-74dc73f6907ea159c0d5d221309e266528ea6134.zip
Add a bunch of new/tested stuff and various small changes 23
Tested mainboards: OK: - Elitegroup GF7050VT-M Reported by Alex - Fujitsu D2724-A1x (used in ESPRIMO E5625) Reported by Rainer Spillmann - Teclast X98 Air 3G Reported by Antonio Ospite Flash chips: - Fix MX25L6405(D) definition by splitting it. Reported by Reggie McMurtrey - Add Macronix MX25L..08E family and rearrange MX25L6436E. - Pm49FL004 to PREW (+EW) Reported by Georg Sauthoff Miscellaneous: - Add board enable for abit KN9 Ultra. - Mark ARM-USB-OCD as working OK. - Use "mobile devices" instead of "laptops" in output. - Tiny other stuff. Corresponding to flashrom svn r1886. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
-rw-r--r--Makefile2
-rw-r--r--board_enable.c2
-rw-r--r--flashchips.c80
-rw-r--r--flashchips.h8
-rw-r--r--ft2232_spi.c2
-rw-r--r--print.c10
-rw-r--r--print_wiki.c10
7 files changed, 81 insertions, 33 deletions
diff --git a/Makefile b/Makefile
index 5c5c02727..e74d051b0 100644
--- a/Makefile
+++ b/Makefile
@@ -1081,6 +1081,6 @@ djgpp-dos: clean
libpayload: clean
make CC="CC=i386-elf-gcc lpgcc" AR=i386-elf-ar RANLIB=i386-elf-ranlib
-.PHONY: all install clean distclean compiler hwlibs features export tarball dos featuresavailable
+.PHONY: all install clean distclean compiler hwlibs features export tarball djgpp-dos featuresavailable libpayload
-include $(OBJS:.o=.d)
diff --git a/board_enable.c b/board_enable.c
index 81dcfec88..31984e356 100644
--- a/board_enable.c
+++ b/board_enable.c
@@ -1099,6 +1099,7 @@ static int nvidia_mcp_gpio0_raise(void)
/*
* Suited for:
* - abit KN8 Ultra: NVIDIA CK804
+ * - abit KN9 Ultra: NVIDIA MCP55
*/
static int nvidia_mcp_gpio2_lower(void)
{
@@ -2314,6 +2315,7 @@ const struct board_match board_matches[] = {
{0x8086, 0x2930, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, P3, "abit", "IP35", 0, OK, intel_ich_gpio16_raise},
{0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, P3, "abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise},
{0x10de, 0x0050, 0x147b, 0x1c1a, 0x10de, 0x0052, 0x147b, 0x1c1a, NULL, NULL, NULL, P3, "abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower},
+ {0x10de, 0x0369, 0x147b, 0x1c20, 0x10de, 0x0360, 0x147b, 0x1c20, "^KN9(NF-MCP55 series)$", NULL, NULL, P3, "abit", "KN9 Ultra", 0, OK, nvidia_mcp_gpio2_lower},
{0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, P3, "abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise},
{0x10de, 0x02f0, 0x147b, 0x1c26, 0x10de, 0x0260, 0x147b, 0x1c26, NULL, NULL, NULL, P3, "abit", "NF-M2 nView", 0, OK, nvidia_mcp_gpio4_lower},
{0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, "(VA6)$", NULL, NULL, P3, "abit", "VA6", 0, OK, via_apollo_gpo4_lower},
diff --git a/flashchips.c b/flashchips.c
index 4f36e95a6..8b5d1ecdc 100644
--- a/flashchips.c
+++ b/flashchips.c
@@ -6803,12 +6803,14 @@ const struct flashchip flashchips[] = {
{
.vendor = "Macronix",
- .name = "MX25L8005/MX25L8006E/MX25V8005",
+ .name = "MX25L8005/MX25L8006E/MX25L8008E/MX25V8005",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L8005,
.total_size = 1024,
.page_size = 256,
+ /* MX25L8006E, MX25L8008E support SFDP */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L8006E, MX25L8008E only) */
.feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -6876,13 +6878,13 @@ const struct flashchip flashchips[] = {
{
.vendor = "Macronix",
- .name = "MX25L1605A/MX25L1606E",
+ .name = "MX25L1605A/MX25L1606E/MX25L1608E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L1605,
.total_size = 2048,
.page_size = 256,
- /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E and MX25L1608E only) */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -6909,7 +6911,7 @@ const struct flashchip flashchips[] = {
.printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read, /* Fast read (0x0B) supported */
+ .read = spi_chip_read, /* Fast read (0x0B) supported (MX25L1608E supports dual-I/O read) */
.voltage = {2700, 3600},
},
@@ -6941,7 +6943,7 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
},
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode, for 73E is quad enable */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */
@@ -7084,7 +7086,7 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
},
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
.read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */
@@ -7093,7 +7095,7 @@ const struct flashchip flashchips[] = {
{
.vendor = "Macronix",
- .name = "MX25L3206E",
+ .name = "MX25L3206E/MX25L3208E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L3205,
@@ -7207,14 +7209,14 @@ const struct flashchip flashchips[] = {
{
.vendor = "Macronix",
- .name = "MX25L6405(D)",
+ .name = "MX25L6405",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
- /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */
- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ /* Has an additional 512B EEPROM sector */
+ .feature_bits = FEATURE_WRSR_WREN,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
.probe_timing = TIMING_ZERO,
@@ -7234,22 +7236,22 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: error flag */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
- .name = "MX25L6406E/MX25L6436E",
+ .name = "MX25L6405D",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
.total_size = 8192,
.page_size = 256,
- /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */
+ /* OTP: 64B total; enter 0xB1, exit 0xC1 */
.feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
.tested = TEST_OK_PREW,
.probe = probe_spi_rdid,
@@ -7270,16 +7272,56 @@ const struct flashchip flashchips[] = {
.block_erase = spi_block_erase_c7,
}
},
- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */
+ .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: continuously program mode */
.unlock = spi_disable_blockprotect_bp3_srwd,
.write = spi_chip_write_256,
- .read = spi_chip_read,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0xBB) supported */
.voltage = {2700, 3600},
},
{
.vendor = "Macronix",
- .name = "MX25L6445E/MX25L6465E/MX25L6473E",
+ .name = "MX25L6406E/MX25L6408E",
+ .bustype = BUS_SPI,
+ .manufacture_id = MACRONIX_ID,
+ .model_id = MACRONIX_MX25L6405,
+ .total_size = 8192,
+ .page_size = 256,
+ /* MX25L6406E supports SFDP */
+ /* OTP: 06E 64B total; enter 0xB1, exit 0xC1 */
+ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP,
+ .tested = TEST_OK_PREW,
+ .probe = probe_spi_rdid,
+ .probe_timing = TIMING_ZERO,
+ .block_erasers =
+ {
+ {
+ .eraseblocks = { {4 * 1024, 2048} },
+ .block_erase = spi_block_erase_20,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_52,
+ }, {
+ .eraseblocks = { {64 * 1024, 128} },
+ .block_erase = spi_block_erase_d8,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_60,
+ }, {
+ .eraseblocks = { {8 * 1024 * 1024, 1} },
+ .block_erase = spi_block_erase_c7,
+ }
+ },
+ .printlock = spi_prettyprint_status_register_bp3_srwd,
+ .unlock = spi_disable_blockprotect_bp3_srwd,
+ .write = spi_chip_write_256,
+ .read = spi_chip_read, /* Fast read (0x0B), dual I/O read supported */
+ .voltage = {2700, 3600},
+ },
+
+ {
+ .vendor = "Macronix",
+ .name = "MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E",
.bustype = BUS_SPI,
.manufacture_id = MACRONIX_ID,
.model_id = MACRONIX_MX25L6405,
@@ -10126,9 +10168,9 @@ const struct flashchip flashchips[] = {
.total_size = 512,
.page_size = 64 * 1024,
.feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET,
- .tested = TEST_OK_PR,
+ .tested = TEST_OK_PREW,
.probe = probe_jedec,
- .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */
+ .probe_timing = TIMING_ZERO,
.block_erasers =
{
{
diff --git a/flashchips.h b/flashchips.h
index 1bf811a1c..07ae49d0a 100644
--- a/flashchips.h
+++ b/flashchips.h
@@ -470,10 +470,10 @@
#define MACRONIX_MX25L1005 0x2011 /* Same as MX25L1005C, MX25L1006E */
#define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C, MX25L2006E */
#define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C, MX25L4006E */
-#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005, MX25L8006E, FIXME: MX25L8073E (4k 0x20) */
-#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */
-#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52); MX25L3273E (4k 0x20, 32k 0x52) */
-#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k 0x52) */
+#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005, MX25L8006E, MX25L8008E, FIXME: MX25L8073E (4k 0x20) */
+#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E/MX25L1608E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */
+#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E/MX25L3208E (4k 0x20, 64k 0x52); MX25L3273E (4k 0x20, 32k 0x52) */
+#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6408E (4k 0x20); MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E (4k 0x20, 32k 0x52) */
#define MACRONIX_MX25L12805D 0x2018 /* MX25L12805D (no 32k); MX25L12865E, MX25L12835F, MX25L12845E (32k 0x52) */
#define MACRONIX_MX25L25635F 0x2019 /* Same as MX25L25639F, but the latter seems to not support REMS */
#define MACRONIX_MX25L1635D 0x2415
diff --git a/ft2232_spi.c b/ft2232_spi.c
index 4e23797bd..08742ecf4 100644
--- a/ft2232_spi.c
+++ b/ft2232_spi.c
@@ -67,7 +67,7 @@ const struct dev_entry devs_ft2232spi[] = {
{FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"},
{GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"},
{FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"},
- {OLIMEX_VID, OLIMEX_ARM_OCD_PID, NT, "Olimex", "ARM-USB-OCD"},
+ {OLIMEX_VID, OLIMEX_ARM_OCD_PID, OK, "Olimex", "ARM-USB-OCD"},
{OLIMEX_VID, OLIMEX_ARM_TINY_PID, OK, "Olimex", "ARM-USB-TINY"},
{OLIMEX_VID, OLIMEX_ARM_OCD_H_PID, OK, "Olimex", "ARM-USB-OCD-H"},
{OLIMEX_VID, OLIMEX_ARM_TINY_H_PID, OK, "Olimex", "ARM-USB-TINY-H"},
diff --git a/print.c b/print.c
index 59bc455e1..a6bc26574 100644
--- a/print.c
+++ b/print.c
@@ -480,9 +480,9 @@ int print_supported(void)
programmer_table[PROGRAMMER_INTERNAL].name);
print_supported_chipsets();
msg_ginfo("\n");
- print_supported_boards_helper(boards_known, "boards");
+ print_supported_boards_helper(boards_known, "mainboards");
msg_ginfo("\n");
- print_supported_boards_helper(laptops_known, "laptops");
+ print_supported_boards_helper(laptops_known, "mobile devices");
#endif
for (i = 0; i < PROGRAMMER_INVALID; i++) {
const struct programmer_entry prog = programmer_table[i];
@@ -535,6 +535,7 @@ const struct board_info boards_known[] = {
B("abit", "IP35 Pro", OK, NULL, NULL),
B("abit", "IS-10", BAD, NULL, "Reported by deejkuba@aol.com to flashrom@coreboot.org, no public archive. Missing board enable and/or M50FW040 unlocking. May work now."),
B("abit", "KN8 Ultra", OK, NULL, NULL),
+ B("abit", "KN9 Ultra", OK, NULL, NULL),
B("abit", "NF-M2 nView", OK, NULL, NULL),
B("abit", "NF-M2S", OK, NULL, NULL),
B("abit", "NF7-S", OK, NULL, NULL),
@@ -774,6 +775,7 @@ const struct board_info boards_known[] = {
B("Elitegroup", "GeForce6100PM-M2 (V3.0)", OK, NULL, NULL),
B("Elitegroup", "GeForce6100SM-M", OK, NULL, NULL),
B("Elitegroup", "GeForce7050M-M (V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=865&MenuID=20&LanID=0", NULL),
+ B("Elitegroup", "GF7050VT-M", OK, NULL, NULL),
B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, NULL, NULL),
B("Elitegroup", "GF8200A", OK, NULL, NULL),
B("Elitegroup", "K7S5A", OK, NULL, NULL),
@@ -803,7 +805,8 @@ const struct board_info boards_known[] = {
B("Foxconn", "P55MX", OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000474", "Needs the MFG jumper to be set correctly before flashing to enable the Flash Descriptor Override Strap."),
B("Foxconn", "Q45M", BAD, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000587", "Probing works (Hardware sequencing, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F91i.html", NULL),
- B("Fujitsu", "D3041-A1", OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."),
+ B("Fujitsu", "D2724-A1x", OK, NULL, "Used in ESPRIMO E5625."),
+ B("Fujitsu", "D3041-A1x", OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."),
B("Fujitsu-Siemens", "CELSIUS W410", BAD, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Industrial&ExtendedLifetime/D3061&D3062/", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."),
B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRIMO/P/EsprimoP5915-6.htm", "Mainboard model is D2312-A2."),
B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gigabyte_dtx-mainboard/", NULL),
@@ -1144,6 +1147,7 @@ const struct board_info laptops_known[] = {
B("IBM/Lenovo", "ThinkPad 240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."),
B("IBM/Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3000Notebook&series=Lenovo+3000+V+Series#viewallmodelstop", NULL),
//B("MSI", "GT60-2OD", OK, "http://www.msi.com/product/nb/GT60_2OD.html", NULL), requires layout patches
+ B("Teclast", "X98 Air 3G", OK, NULL, NULL),
#endif
{0},
diff --git a/print_wiki.c b/print_wiki.c
index 2936dbf86..d2fb5e28d 100644
--- a/print_wiki.c
+++ b/print_wiki.c
@@ -133,15 +133,15 @@ static const char *test_state_to_template(enum test_state test_state)
}
#if CONFIG_INTERNAL == 1
-static const char laptop_intro[] = "\n== Supported laptops/notebooks ==\n\n\
-In general, flashing laptops is more difficult because laptops\n\n\
+static const char laptop_intro[] = "\n== Supported mobile devices (laptops, tablets etc.) ==\n\n\
+In general, flashing mobile devices is more difficult because they\n\n\
* often use the flash chip for stuff besides the BIOS,\n\
* often have special protection stuff which has to be handled by flashrom,\n\
* often use flash translation circuits which need drivers in flashrom.\n\n\
<div style=\"margin-top:0.5em; padding:0.5em 0.5em 0.5em 0.5em; \
background-color:#ff6666; align:right; border:1px solid #000000;\">\n\
'''IMPORTANT:''' At this point we recommend to '''not''' use flashrom on \
-untested laptops unless you have a means to recover from a flashing that goes \
+untested mobile devices unless you have a means to recover from a flashing that goes \
wrong (a working backup flash chip and/or good soldering skills).\n</div>\n";
static void print_supported_chipsets_wiki(int cols)
@@ -275,10 +275,10 @@ static void print_supported_boards_wiki_helper(const char *devicetype, int cols,
static void print_supported_boards_wiki(void)
{
printf("%s", board_intro);
- print_supported_boards_wiki_helper("boards", 2, boards_known);
+ print_supported_boards_wiki_helper("mainboards", 2, boards_known);
printf("%s", laptop_intro);
- print_supported_boards_wiki_helper("laptops", 1, laptops_known);
+ print_supported_boards_wiki_helper("mobile devices", 1, laptops_known);
}
#endif