diff options
| author | Shawn Anastasio <shawnanastasio@yahoo.com> | 2017-12-31 00:17:15 -0600 |
|---|---|---|
| committer | Nico Huber <nico.h@gmx.de> | 2018-01-26 15:23:10 +0000 |
| commit | 2b5adfb1b656dd6a6efbf45a7a411c87840c5394 (patch) | |
| tree | cfc4bf09d45d4ad59b645c0cadaec9507ba5c152 /flashrom.8.tmpl | |
| parent | 25fde40f8594b1c13ba7a4c3a605b96b200a4e11 (diff) | |
| download | flashrom-2b5adfb1b656dd6a6efbf45a7a411c87840c5394.tar.gz flashrom-2b5adfb1b656dd6a6efbf45a7a411c87840c5394.tar.bz2 flashrom-2b5adfb1b656dd6a6efbf45a7a411c87840c5394.zip | |
buspirate_spi: Add support for variable serial speeds
This patch sets the default baud rate for communication between
the host device and the Bus Pirate for hardware versions 3.0
and greater to 2M baud.
It also introduces the ability to manually set the baud rate via
the added 'serialspeed' programmer parameter.
This is done in two parts. Firstly, the requested serial speed is looked up
in a table to determine the appropriate clock divisor and the divisor is sent
to the bus pirate. Then, the system's baud rate for the selected serial port
is set using serial.c's 'serialport_config'. This function's prototype had to
be added to programmer.h.
In testing, using the 2M baud rate was able to significantly decrease
flash times (down from 20+ minutes to less than 2 minutes for an 8MB flash).
Change-Id: I3706f17a94fdf056063f2ad4a5f0a219665cdcbf
Signed-off-by: Shawn Anastasio <shawnanastasio@yahoo.com>
Reviewed-on: https://review.coreboot.org/23057
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'flashrom.8.tmpl')
| -rw-r--r-- | flashrom.8.tmpl | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index 143d76c5f..160011374 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -817,6 +817,18 @@ can be .BR 30k ", " 125k ", " 250k ", " 1M ", " 2M ", " 2.6M ", " 4M " or " 8M (in Hz). The default is the maximum frequency of 8 MHz. .sp +The baud rate for communication between the host and the Bus Pirate can be specified with the optional +.B serialspeed +parameter. Syntax is +.sp +.B " flashrom -p buspirate_spi:serialspeed=baud +.sp +where +.B baud +can be +.BR 115200 ", " 230400 ", " 250000 " or " 2000000 " (" 2M ")." +The default is 2M baud for Bus Pirate hardware version 3.0 and greater, and 115200 otherwise. +.sp An optional pullups parameter specifies the use of the Bus Pirate internal pull-up resistors. This may be needed if you are working with a flash ROM chip that you have physically removed from the board. Syntax is .sp |