diff options
| author | Jacek Naglak <jnaglak@tlen.pl> | 2022-05-18 02:25:13 +0200 |
|---|---|---|
| committer | Thomas Heijligen <src@posteo.de> | 2022-07-18 19:08:44 +0000 |
| commit | 3543bfed84942eea8d4ba398001656f27e367a87 (patch) | |
| tree | 2803795515fed78b903289d9c02e1d1468ea2738 /flashrom.8.tmpl | |
| parent | ed2da0f2bca3bb7316c7e81cfa3cfc068a31aa71 (diff) | |
| download | flashrom-3543bfed84942eea8d4ba398001656f27e367a87.tar.gz flashrom-3543bfed84942eea8d4ba398001656f27e367a87.tar.bz2 flashrom-3543bfed84942eea8d4ba398001656f27e367a87.zip | |
ft2232_spi.c: Add support for kt-link jtag interface
Change tested writing, reading and erasing spi flashes
pinout:
jtag - spi
1 vcc - vcc, wp#, hold#
4 gnd - gnd
5 tdi - si
7 tms - cs#
9 tck - sck
13 tdo - so
Connect pins 9 and 12 in EXT connector for 3.3V power.
Signed-off-by: Jacek Naglak <jnaglak@tlen.pl>
Change-Id: Id58c675bc410ec3ef6d58603d13efc9ca53bb87c
Reviewed-on: https://review.coreboot.org/c/flashrom/+/64440
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'flashrom.8.tmpl')
| -rw-r--r-- | flashrom.8.tmpl | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/flashrom.8.tmpl b/flashrom.8.tmpl index c8a998846..a37b88a03 100644 --- a/flashrom.8.tmpl +++ b/flashrom.8.tmpl @@ -898,8 +898,8 @@ Atmel AT25128, AT25256, Micron (ST) M95128, M95256 and OnSemi (Catalyst) CAT25CS This module supports various programmers based on FTDI FT2232/FT4232H/FT232H chips including the DLP Design DLP-USB1232H, openbiosprog-spi, Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, OpenMoko Neo1973 Debug board (V2+), TIAO/DIYGADGET USB -Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2 and Tin Can Tools -Flyswatter/Flyswatter 2. +Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2, Tin Can Tools +Flyswatter/Flyswatter 2 and Kristech KT-LINK. .sp An optional parameter specifies the controller type, channel/interface/port it should support. For that you have to use the @@ -912,7 +912,7 @@ can be .BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \ arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \ ", " tumpa ", " tumpalite ", " picotap ", " google-servo ", " google-servo-v2 \ -" or " google-servo-v2-legacy +", " google-servo-v2-legacy " or " kt-link .B interface can be .BR A ", " B ", " C ", or " D . |