programmer_table: move array content to an own file

Change-Id: I8e6d704e845ee4152c8676dd19dff0934fff007b
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.de>
Reviewed-on: https://review.coreboot.org/c/flashrom/+/52944
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 493 insertions, 0 deletions

diff --git a/programmer_table.c b/programmer_table.c
new file mode 100644
index 000000000..3c6dd5811
--- /dev/null
+++ b/programmer_table.c
@@ -0,0 +1,493 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "programmer.h"
+
+const struct programmer_entry programmer_table[] = {
+#if CONFIG_INTERNAL == 1
+	{
+		.name			= "internal",
+		.type			= OTHER,
+		.devs.note		= NULL,
+		.init			= internal_init,
+		.map_flash_region	= physmap,
+		.unmap_flash_region	= physunmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_DUMMY == 1
+	{
+		.name			= "dummy",
+		.type			= OTHER,
+					/* FIXME */
+		.devs.note		= "Dummy device, does nothing and logs all accesses\n",
+		.init			= dummy_init,
+		.map_flash_region	= dummy_map,
+		.unmap_flash_region	= dummy_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_MEC1308 == 1
+	{
+		.name			= "mec1308",
+		.type			= OTHER,
+		.devs.note		= "Microchip MEC1308 Embedded Controller.\n",
+		.init			= mec1308_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NIC3COM == 1
+	{
+		.name			= "nic3com",
+		.type			= PCI,
+		.devs.dev		= nics_3com,
+		.init			= nic3com_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NICREALTEK == 1
+	{
+		/* This programmer works for Realtek RTL8139 and SMC 1211. */
+		.name			= "nicrealtek",
+		.type			= PCI,
+		.devs.dev		= nics_realtek,
+		.init			= nicrealtek_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NICNATSEMI == 1
+	{
+		.name			= "nicnatsemi",
+		.type			= PCI,
+		.devs.dev		= nics_natsemi,
+		.init			= nicnatsemi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_GFXNVIDIA == 1
+	{
+		.name			= "gfxnvidia",
+		.type			= PCI,
+		.devs.dev		= gfx_nvidia,
+		.init			= gfxnvidia_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_RAIDEN_DEBUG_SPI == 1
+	{
+		.name			= "raiden_debug_spi",
+		.type			= USB,
+		.devs.dev		= devs_raiden,
+		.init			= raiden_debug_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_DRKAISER == 1
+	{
+		.name			= "drkaiser",
+		.type			= PCI,
+		.devs.dev		= drkaiser_pcidev,
+		.init			= drkaiser_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_SATASII == 1
+	{
+		.name			= "satasii",
+		.type			= PCI,
+		.devs.dev		= satas_sii,
+		.init			= satasii_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_ATAHPT == 1
+	{
+		.name			= "atahpt",
+		.type			= PCI,
+		.devs.dev		= ata_hpt,
+		.init			= atahpt_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_ATAVIA == 1
+	{
+		.name			= "atavia",
+		.type			= PCI,
+		.devs.dev		= ata_via,
+		.init			= atavia_init,
+		.map_flash_region	= atavia_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_ATAPROMISE == 1
+	{
+		.name			= "atapromise",
+		.type			= PCI,
+		.devs.dev		= ata_promise,
+		.init			= atapromise_init,
+		.map_flash_region	= atapromise_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_IT8212 == 1
+	{
+		.name			= "it8212",
+		.type			= PCI,
+		.devs.dev		= devs_it8212,
+		.init			= it8212_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_FT2232_SPI == 1
+	{
+		.name			= "ft2232_spi",
+		.type			= USB,
+		.devs.dev		= devs_ft2232spi,
+		.init			= ft2232_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_SERPROG == 1
+	{
+		.name			= "serprog",
+		.type			= OTHER,
+					/* FIXME */
+		.devs.note		= "All programmer devices speaking the serprog protocol\n",
+		.init			= serprog_init,
+		.map_flash_region	= serprog_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= serprog_delay,
+	},
+#endif
+
+#if CONFIG_BUSPIRATE_SPI == 1
+	{
+		.name			= "buspirate_spi",
+		.type			= OTHER,
+					/* FIXME */
+		.devs.note		= "Dangerous Prototypes Bus Pirate\n",
+		.init			= buspirate_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_DEDIPROG == 1
+	{
+		.name			= "dediprog",
+		.type			= USB,
+		.devs.dev		= devs_dediprog,
+		.init			= dediprog_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_DEVELOPERBOX_SPI == 1
+	{
+		.name			= "developerbox",
+		.type			= USB,
+		.devs.dev		= devs_developerbox_spi,
+		.init			= developerbox_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_ENE_LPC == 1
+	{
+		.name			= "ene_lpc",
+		.type			= OTHER,
+		.devs.note		= "ENE LPC interface keyboard controller\n",
+		.init			= ene_lpc_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_RAYER_SPI == 1
+	{
+		.name			= "rayer_spi",
+		.type			= OTHER,
+					/* FIXME */
+		.devs.note		= "RayeR parallel port programmer\n",
+		.init			= rayer_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_PONY_SPI == 1
+	{
+		.name			= "pony_spi",
+		.type			= OTHER,
+					/* FIXME */
+		.devs.note		= "Programmers compatible with SI-Prog, serbang or AJAWe\n",
+		.init			= pony_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NICINTEL == 1
+	{
+		.name			= "nicintel",
+		.type			= PCI,
+		.devs.dev		= nics_intel,
+		.init			= nicintel_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NICINTEL_SPI == 1
+	{
+		.name			= "nicintel_spi",
+		.type			= PCI,
+		.devs.dev		= nics_intel_spi,
+		.init			= nicintel_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NICINTEL_EEPROM == 1
+	{
+		.name			= "nicintel_eeprom",
+		.type			= PCI,
+		.devs.dev		= nics_intel_ee,
+		.init			= nicintel_ee_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_OGP_SPI == 1
+	{
+		.name			= "ogp_spi",
+		.type			= PCI,
+		.devs.dev		= ogp_spi,
+		.init			= ogp_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_SATAMV == 1
+	{
+		.name			= "satamv",
+		.type			= PCI,
+		.devs.dev		= satas_mv,
+		.init			= satamv_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_LINUX_MTD == 1
+	{
+		.name			= "linux_mtd",
+		.type			= OTHER,
+		.devs.note		= "Device files /dev/mtd*\n",
+		.init			= linux_mtd_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_LINUX_SPI == 1
+	{
+		.name			= "linux_spi",
+		.type			= OTHER,
+		.devs.note		= "Device files /dev/spidev*.*\n",
+		.init			= linux_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_LSPCON_I2C_SPI == 1
+	{
+		.name			= "lspcon_i2c_spi",
+		.type			= OTHER,
+		.devs.note		= "Device files /dev/i2c-*.\n",
+		.init			= lspcon_i2c_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_REALTEK_MST_I2C_SPI == 1
+	{
+		.name			= "realtek_mst_i2c_spi",
+		.type			= OTHER,
+		.devs.note		= "Device files /dev/i2c-*.\n",
+		.init			= realtek_mst_i2c_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_USBBLASTER_SPI == 1
+	{
+		.name			= "usbblaster_spi",
+		.type			= USB,
+		.devs.dev		= devs_usbblasterspi,
+		.init			= usbblaster_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_MSTARDDC_SPI == 1
+	{
+		.name			= "mstarddc_spi",
+		.type			= OTHER,
+		.devs.note		= "MSTAR DDC devices addressable via /dev/i2c-* on Linux.\n",
+		.init			= mstarddc_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_PICKIT2_SPI == 1
+	{
+		.name			= "pickit2_spi",
+		.type			= USB,
+		.devs.dev		= devs_pickit2_spi,
+		.init			= pickit2_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_CH341A_SPI == 1
+	{
+		.name			= "ch341a_spi",
+		.type			= USB,
+		.devs.dev		= devs_ch341a_spi,
+		.init			= ch341a_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= ch341a_spi_delay,
+	},
+#endif
+
+#if CONFIG_DIGILENT_SPI == 1
+	{
+		.name			= "digilent_spi",
+		.type			= USB,
+		.devs.dev		= devs_digilent_spi,
+		.init			= digilent_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_JLINK_SPI == 1
+	{
+		.name			= "jlink_spi",
+		.type			= OTHER,
+		.init			= jlink_spi_init,
+		.devs.note		= "SEGGER J-Link and compatible devices\n",
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_NI845X_SPI == 1
+	{
+		.name			= "ni845x_spi",
+		.type			= OTHER, // choose other because NI-845x uses own USB implementation
+		.devs.note		= "National Instruments USB-845x\n",
+		.init			= ni845x_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+
+#if CONFIG_STLINKV3_SPI == 1
+	{
+		.name			= "stlinkv3_spi",
+		.type			= USB,
+		.devs.dev		= devs_stlinkv3_spi,
+		.init			= stlinkv3_spi_init,
+		.map_flash_region	= fallback_map,
+		.unmap_flash_region	= fallback_unmap,
+		.delay			= internal_delay,
+	},
+#endif
+};
+
+const size_t programmer_table_size = ARRAY_SIZE(programmer_table);
\ No newline at end of file