diff options
| -rw-r--r-- | nicintel_spi.c | 94 |
1 files changed, 71 insertions, 23 deletions
diff --git a/nicintel_spi.c b/nicintel_spi.c index 9195c79e5..bbe0afb6d 100644 --- a/nicintel_spi.c +++ b/nicintel_spi.c @@ -70,6 +70,9 @@ #define FL_SO 3 #define FL_REQ 4 #define FL_GNT 5 +#define FL_LOCKED 6 +#define FL_ABORT 7 +#define FL_CLR_ERR 8 /* Currently unused */ // #define FL_BUSY 30 // #define FL_ER 31 @@ -95,6 +98,14 @@ const struct dev_entry nics_intel_spi[] = { {PCI_VENDOR_ID_INTEL, 0x152a, NT, "Intel", "82599 10 Gigabit Dual Port Backplane Controller with FCoE"}, {PCI_VENDOR_ID_INTEL, 0x1557, NT, "Intel", "82599 10 Gigabit SFI Network Controller"}, + {PCI_VENDOR_ID_INTEL, 0x1531, OK, "Intel", "I210 Gigabit Network Connection Unprogrammed"}, + {PCI_VENDOR_ID_INTEL, 0x1532, NT, "Intel", "I211 Gigabit Network Connection Unprogrammed"}, + {PCI_VENDOR_ID_INTEL, 0x1533, NT, "Intel", "I210 Gigabit Network Connection"}, + {PCI_VENDOR_ID_INTEL, 0x1536, NT, "Intel", "I210 Gigabit Network Connection SERDES Fiber"}, + {PCI_VENDOR_ID_INTEL, 0x1537, NT, "Intel", "I210 Gigabit Network Connection SERDES Backplane"}, + {PCI_VENDOR_ID_INTEL, 0x1538, NT, "Intel", "I210 Gigabit Network Connection SGMII"}, + {PCI_VENDOR_ID_INTEL, 0x1539, NT, "Intel", "I211 Gigabit Network Connection"}, + {0}, }; @@ -182,32 +193,10 @@ static int nicintel_spi_shutdown(void *data) return 0; } -int nicintel_spi_init(void) +static int nicintel_spi_82599_enable_flash(void) { - struct pci_dev *dev = NULL; uint32_t tmp; - if (rget_io_perms()) - return 1; - - dev = pcidev_init(nics_intel_spi, PCI_BASE_ADDRESS_0); - if (!dev) - return 1; - - uint32_t io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0); - if (!io_base_addr) - return 1; - - if (dev->device_id < 0x10d8) { - nicintel_spibar = rphysmap("Intel Gigabit NIC w/ SPI flash", io_base_addr, - MEMMAP_SIZE); - } else { - nicintel_spibar = rphysmap("Intel 10 Gigabit NIC w/ SPI flash", io_base_addr + 0x10000, - MEMMAP_SIZE); - } - if (nicintel_spibar == ERROR_PTR) - return 1; - /* Automatic restore of EECD on shutdown is not possible because EECD * does not only contain FLASH_WRITES_DISABLED|FLASH_WRITES_ENABLED, * but other bits with side effects as well. Those other bits must be @@ -228,6 +217,65 @@ int nicintel_spi_init(void) if (register_shutdown(nicintel_spi_shutdown, NULL)) return 1; + return 0; +} + +static int nicintel_spi_i210_enable_flash() +{ + uint32_t tmp; + + tmp = pci_mmio_readl(nicintel_spibar + FLA); + if (tmp & (1 << FL_LOCKED)) { + msg_perr("Flash is in Secure Mode. Abort.\n"); + return 1; + } + + if (!(tmp & (1 << FL_ABORT))) + return 0; + + tmp |= (1 << FL_CLR_ERR); + pci_mmio_writel(tmp, nicintel_spibar + FLA); + tmp = pci_mmio_readl(nicintel_spibar + FLA); + if (!(tmp & (1 << FL_ABORT))) { + msg_perr("Unable to clear Flash Access Error. Abort\n"); + return 1; + } + + return 0; +} + +int nicintel_spi_init(void) +{ + struct pci_dev *dev = NULL; + + if (rget_io_perms()) + return 1; + + dev = pcidev_init(nics_intel_spi, PCI_BASE_ADDRESS_0); + if (!dev) + return 1; + + uint32_t io_base_addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0); + if (!io_base_addr) + return 1; + + if ((dev->device_id & 0xfff0) == 0x1530) { + nicintel_spibar = rphysmap("Intel I210 Gigabit w/ SPI flash", io_base_addr + 0x12000, + MEMMAP_SIZE); + if (!nicintel_spibar || nicintel_spi_i210_enable_flash()) + return 1; + } else if (dev->device_id < 0x10d8) { + nicintel_spibar = rphysmap("Intel Gigabit NIC w/ SPI flash", io_base_addr, + MEMMAP_SIZE); + if (!nicintel_spibar || nicintel_spi_82599_enable_flash()) + return 1; + } else { + nicintel_spibar = rphysmap("Intel 10 Gigabit NIC w/ SPI flash", io_base_addr + 0x10000, + MEMMAP_SIZE); + if (!nicintel_spibar || nicintel_spi_82599_enable_flash()) + return 1; + } + if (register_spi_bitbang_master(&bitbang_spi_master_nicintel)) return 1; |