diff options
Diffstat (limited to 'spi25.c')
-rw-r--r-- | spi25.c | 992 |
1 files changed, 992 insertions, 0 deletions
diff --git a/spi25.c b/spi25.c new file mode 100644 index 000000000..54121b081 --- /dev/null +++ b/spi25.c @@ -0,0 +1,992 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2007, 2008, 2009 Carl-Daniel Hailfinger + * Copyright (C) 2008 coresystems GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* + * Contains the common SPI chip driver functions + */ + +#include <string.h> +#include "flash.h" +#include "flashchips.h" +#include "chipdrivers.h" +#include "spi.h" + +void spi_prettyprint_status_register(struct flashchip *flash); + +static int spi_rdid(unsigned char *readarr, int bytes) +{ + const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID }; + int ret; + int i; + + ret = spi_send_command(sizeof(cmd), bytes, cmd, readarr); + if (ret) + return ret; + printf_debug("RDID returned"); + for (i = 0; i < bytes; i++) + printf_debug(" 0x%02x", readarr[i]); + printf_debug(". "); + return 0; +} + +static int spi_rems(unsigned char *readarr) +{ + unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, 0, 0, 0 }; + uint32_t readaddr; + int ret; + + ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); + if (ret == SPI_INVALID_ADDRESS) { + /* Find the lowest even address allowed for reads. */ + readaddr = (spi_get_valid_read_addr() + 1) & ~1; + cmd[1] = (readaddr >> 16) & 0xff, + cmd[2] = (readaddr >> 8) & 0xff, + cmd[3] = (readaddr >> 0) & 0xff, + ret = spi_send_command(sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr); + } + if (ret) + return ret; + printf_debug("REMS returned %02x %02x. ", readarr[0], readarr[1]); + return 0; +} + +static int spi_res(unsigned char *readarr) +{ + unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, 0, 0, 0 }; + uint32_t readaddr; + int ret; + + ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + if (ret == SPI_INVALID_ADDRESS) { + /* Find the lowest even address allowed for reads. */ + readaddr = (spi_get_valid_read_addr() + 1) & ~1; + cmd[1] = (readaddr >> 16) & 0xff, + cmd[2] = (readaddr >> 8) & 0xff, + cmd[3] = (readaddr >> 0) & 0xff, + ret = spi_send_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr); + } + if (ret) + return ret; + printf_debug("RES returned %02x. ", readarr[0]); + return 0; +} + +int spi_write_enable(void) +{ + const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN }; + int result; + + /* Send WREN (Write Enable) */ + result = spi_send_command(sizeof(cmd), 0, cmd, NULL); + + if (result) + fprintf(stderr, "%s failed\n", __func__); + + return result; +} + +int spi_write_disable(void) +{ + const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI }; + + /* Send WRDI (Write Disable) */ + return spi_send_command(sizeof(cmd), 0, cmd, NULL); +} + +static int probe_spi_rdid_generic(struct flashchip *flash, int bytes) +{ + unsigned char readarr[4]; + uint32_t id1; + uint32_t id2; + + if (spi_rdid(readarr, bytes)) + return 0; + + if (!oddparity(readarr[0])) + printf_debug("RDID byte 0 parity violation. "); + + /* Check if this is a continuation vendor ID */ + if (readarr[0] == 0x7f) { + if (!oddparity(readarr[1])) + printf_debug("RDID byte 1 parity violation. "); + id1 = (readarr[0] << 8) | readarr[1]; + id2 = readarr[2]; + if (bytes > 3) { + id2 <<= 8; + id2 |= readarr[3]; + } + } else { + id1 = readarr[0]; + id2 = (readarr[1] << 8) | readarr[2]; + } + + printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) { + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + + return 1; + } + + /* Test if this is a pure vendor match. */ + if (id1 == flash->manufacture_id && + GENERIC_DEVICE_ID == flash->model_id) + return 1; + + /* Test if there is any vendor ID. */ + if (GENERIC_MANUF_ID == flash->manufacture_id && + id1 != 0xff) + return 1; + + return 0; +} + +int probe_spi_rdid(struct flashchip *flash) +{ + return probe_spi_rdid_generic(flash, 3); +} + +/* support 4 bytes flash ID */ +int probe_spi_rdid4(struct flashchip *flash) +{ + /* only some SPI chipsets support 4 bytes commands */ + switch (spi_controller) { +#if INTERNAL_SUPPORT == 1 + case SPI_CONTROLLER_ICH7: + case SPI_CONTROLLER_ICH9: + case SPI_CONTROLLER_VIA: + case SPI_CONTROLLER_SB600: + case SPI_CONTROLLER_WBSIO: +#endif +#if FT2232_SPI_SUPPORT == 1 + case SPI_CONTROLLER_FT2232: +#endif +#if DUMMY_SUPPORT == 1 + case SPI_CONTROLLER_DUMMY: +#endif +#if BUSPIRATE_SPI_SUPPORT == 1 + case SPI_CONTROLLER_BUSPIRATE: +#endif +#if DEDIPROG_SUPPORT == 1 + case SPI_CONTROLLER_DEDIPROG: +#endif + return probe_spi_rdid_generic(flash, 4); + default: + printf_debug("4b ID not supported on this SPI controller\n"); + } + + return 0; +} + +int probe_spi_rems(struct flashchip *flash) +{ + unsigned char readarr[JEDEC_REMS_INSIZE]; + uint32_t id1, id2; + + if (spi_rems(readarr)) + return 0; + + id1 = readarr[0]; + id2 = readarr[1]; + + printf_debug("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); + + if (id1 == flash->manufacture_id && id2 == flash->model_id) { + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + + return 1; + } + + /* Test if this is a pure vendor match. */ + if (id1 == flash->manufacture_id && + GENERIC_DEVICE_ID == flash->model_id) + return 1; + + /* Test if there is any vendor ID. */ + if (GENERIC_MANUF_ID == flash->manufacture_id && + id1 != 0xff) + return 1; + + return 0; +} + +int probe_spi_res(struct flashchip *flash) +{ + unsigned char readarr[3]; + uint32_t id2; + const unsigned char allff[] = {0xff, 0xff, 0xff}; + const unsigned char all00[] = {0x00, 0x00, 0x00}; + + /* Check if RDID is usable and does not return 0xff 0xff 0xff or + * 0x00 0x00 0x00. In that case, RES is pointless. + */ + if (!spi_rdid(readarr, 3) && memcmp(readarr, allff, 3) && + memcmp(readarr, all00, 3)) { + msg_cdbg("Ignoring RES in favour of RDID.\n"); + return 0; + } + /* Check if REMS is usable and does not return 0xff 0xff or + * 0x00 0x00. In that case, RES is pointless. + */ + if (!spi_rems(readarr) && memcmp(readarr, allff, JEDEC_REMS_INSIZE) && + memcmp(readarr, all00, JEDEC_REMS_INSIZE)) { + msg_cdbg("Ignoring RES in favour of REMS.\n"); + return 0; + } + + if (spi_res(readarr)) + return 0; + + /* FIXME: Handle the case where RES gives a 2-byte response. */ + id2 = readarr[0]; + printf_debug("%s: id 0x%x\n", __func__, id2); + if (id2 != flash->model_id) + return 0; + + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + return 1; +} + +uint8_t spi_read_status_register(void) +{ + const unsigned char cmd[JEDEC_RDSR_OUTSIZE] = { JEDEC_RDSR }; + /* FIXME: No workarounds for driver/hardware bugs in generic code. */ + unsigned char readarr[2]; /* JEDEC_RDSR_INSIZE=1 but wbsio needs 2 */ + int ret; + + /* Read Status Register */ + ret = spi_send_command(sizeof(cmd), sizeof(readarr), cmd, readarr); + if (ret) + fprintf(stderr, "RDSR failed!\n"); + + return readarr[0]; +} + +/* Prettyprint the status register. Common definitions. */ +void spi_prettyprint_status_register_common(uint8_t status) +{ + printf_debug("Chip status register: Bit 5 / Block Protect 3 (BP3) is " + "%sset\n", (status & (1 << 5)) ? "" : "not "); + printf_debug("Chip status register: Bit 4 / Block Protect 2 (BP2) is " + "%sset\n", (status & (1 << 4)) ? "" : "not "); + printf_debug("Chip status register: Bit 3 / Block Protect 1 (BP1) is " + "%sset\n", (status & (1 << 3)) ? "" : "not "); + printf_debug("Chip status register: Bit 2 / Block Protect 0 (BP0) is " + "%sset\n", (status & (1 << 2)) ? "" : "not "); + printf_debug("Chip status register: Write Enable Latch (WEL) is " + "%sset\n", (status & (1 << 1)) ? "" : "not "); + printf_debug("Chip status register: Write In Progress (WIP/BUSY) is " + "%sset\n", (status & (1 << 0)) ? "" : "not "); +} + +/* Prettyprint the status register. Works for + * ST M25P series + * MX MX25L series + */ +void spi_prettyprint_status_register_st_m25p(uint8_t status) +{ + printf_debug("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + printf_debug("Chip status register: Bit 6 is " + "%sset\n", (status & (1 << 6)) ? "" : "not "); + spi_prettyprint_status_register_common(status); +} + +void spi_prettyprint_status_register_sst25(uint8_t status) +{ + printf_debug("Chip status register: Block Protect Write Disable " + "(BPL) is %sset\n", (status & (1 << 7)) ? "" : "not "); + printf_debug("Chip status register: Auto Address Increment Programming " + "(AAI) is %sset\n", (status & (1 << 6)) ? "" : "not "); + spi_prettyprint_status_register_common(status); +} + +/* Prettyprint the status register. Works for + * SST 25VF016 + */ +void spi_prettyprint_status_register_sst25vf016(uint8_t status) +{ + const char *bpt[] = { + "none", + "1F0000H-1FFFFFH", + "1E0000H-1FFFFFH", + "1C0000H-1FFFFFH", + "180000H-1FFFFFH", + "100000H-1FFFFFH", + "all", "all" + }; + spi_prettyprint_status_register_sst25(status); + printf_debug("Resulting block protection : %s\n", + bpt[(status & 0x1c) >> 2]); +} + +void spi_prettyprint_status_register_sst25vf040b(uint8_t status) +{ + const char *bpt[] = { + "none", + "0x70000-0x7ffff", + "0x60000-0x7ffff", + "0x40000-0x7ffff", + "all blocks", "all blocks", "all blocks", "all blocks" + }; + spi_prettyprint_status_register_sst25(status); + printf_debug("Resulting block protection : %s\n", + bpt[(status & 0x1c) >> 2]); +} + +void spi_prettyprint_status_register(struct flashchip *flash) +{ + uint8_t status; + + status = spi_read_status_register(); + printf_debug("Chip status register is %02x\n", status); + switch (flash->manufacture_id) { + case ST_ID: + if (((flash->model_id & 0xff00) == 0x2000) || + ((flash->model_id & 0xff00) == 0x2500)) + spi_prettyprint_status_register_st_m25p(status); + break; + case MX_ID: + if ((flash->model_id & 0xff00) == 0x2000) + spi_prettyprint_status_register_st_m25p(status); + break; + case SST_ID: + switch (flash->model_id) { + case 0x2541: + spi_prettyprint_status_register_sst25vf016(status); + break; + case 0x8d: + case 0x258d: + spi_prettyprint_status_register_sst25vf040b(status); + break; + default: + spi_prettyprint_status_register_sst25(status); + break; + } + break; + } +} + +int spi_chip_erase_60(struct flashchip *flash) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_CE_60_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_CE_60 }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_disable_blockprotect(); + if (result) { + fprintf(stderr, "spi_disable_blockprotect failed\n"); + return result; + } + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution\n", + __func__); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 1-85 s, so wait in 1 s steps. + */ + /* FIXME: We assume spi_read_status_register will never fail. */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(1000 * 1000); + if (check_erased_range(flash, 0, flash->total_size * 1024)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +int spi_chip_erase_c7(struct flashchip *flash) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_CE_C7_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_CE_C7 }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_disable_blockprotect(); + if (result) { + fprintf(stderr, "spi_disable_blockprotect failed\n"); + return result; + } + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution\n", __func__); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 1-85 s, so wait in 1 s steps. + */ + /* FIXME: We assume spi_read_status_register will never fail. */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(1000 * 1000); + if (check_erased_range(flash, 0, flash->total_size * 1024)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +int spi_chip_erase_60_c7(struct flashchip *flash) +{ + int result; + result = spi_chip_erase_60(flash); + if (result) { + printf_debug("spi_chip_erase_60 failed, trying c7\n"); + result = spi_chip_erase_c7(flash); + } + return result; +} + +int spi_block_erase_52(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BE_52_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BE_52, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(100 * 1000); + if (check_erased_range(flash, addr, blocklen)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +/* Block size is usually + * 64k for Macronix + * 32k for SST + * 4-32k non-uniform for EON + */ +int spi_block_erase_d8(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BE_D8_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BE_D8, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(100 * 1000); + if (check_erased_range(flash, addr, blocklen)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +/* Block size is usually + * 4k for PMC + */ +int spi_block_erase_d7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BE_D7_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BE_D7, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 100-4000 ms, so wait in 100 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(100 * 1000); + if (check_erased_range(flash, addr, blocklen)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +int spi_chip_erase_d8(struct flashchip *flash) +{ + int i, rc = 0; + int total_size = flash->total_size * 1024; + int erase_size = 64 * 1024; + + spi_disable_blockprotect(); + + printf("Erasing chip: \n"); + + for (i = 0; i < total_size / erase_size; i++) { + rc = spi_block_erase_d8(flash, i * erase_size, erase_size); + if (rc) { + fprintf(stderr, "Error erasing block at 0x%x\n", i); + break; + } + } + + printf("\n"); + + return rc; +} + +/* Sector size is usually 4k, though Macronix eliteflash has 64k */ +int spi_block_erase_20(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_SE_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_SE, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + return result; + } + /* Wait until the Write-In-Progress bit is cleared. + * This usually takes 15-800 ms, so wait in 10 ms steps. + */ + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(10 * 1000); + if (check_erased_range(flash, addr, blocklen)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + return 0; +} + +int spi_block_erase_60(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + if ((addr != 0) || (blocklen != flash->total_size * 1024)) { + fprintf(stderr, "%s called with incorrect arguments\n", + __func__); + return -1; + } + return spi_chip_erase_60(flash); +} + +int spi_block_erase_c7(struct flashchip *flash, unsigned int addr, unsigned int blocklen) +{ + if ((addr != 0) || (blocklen != flash->total_size * 1024)) { + fprintf(stderr, "%s called with incorrect arguments\n", + __func__); + return -1; + } + return spi_chip_erase_c7(flash); +} + +int spi_write_status_enable(void) +{ + const unsigned char cmd[JEDEC_EWSR_OUTSIZE] = { JEDEC_EWSR }; + int result; + + /* Send EWSR (Enable Write Status Register). */ + result = spi_send_command(sizeof(cmd), JEDEC_EWSR_INSIZE, cmd, NULL); + + if (result) + fprintf(stderr, "%s failed\n", __func__); + + return result; +} + +/* + * This is according the SST25VF016 datasheet, who knows it is more + * generic that this... + */ +int spi_write_status_register(int status) +{ + int result; + struct spi_command cmds[] = { + { + /* FIXME: WRSR requires either EWSR or WREN depending on chip type. */ + .writecnt = JEDEC_EWSR_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_EWSR }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_WRSR_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WRSR, (unsigned char) status }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution\n", + __func__); + } + return result; +} + +int spi_byte_program(int addr, uint8_t databyte) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_BYTE_PROGRAM, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff), + databyte + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + } + return result; +} + +int spi_nbyte_program(int addr, uint8_t *bytes, int len) +{ + int result; + /* FIXME: Switch to malloc based on len unless that kills speed. */ + unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = { + JEDEC_BYTE_PROGRAM, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr >> 0) & 0xff, + }; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + len, + .writearr = cmd, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + }}; + + if (!len) { + fprintf(stderr, "%s called for zero-length write\n", __func__); + return 1; + } + if (len > 256) { + fprintf(stderr, "%s called for too long a write\n", __func__); + return 1; + } + + memcpy(&cmd[4], bytes, len); + + result = spi_send_multicommand(cmds); + if (result) { + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); + } + return result; +} + +int spi_disable_blockprotect(void) +{ + uint8_t status; + int result; + + status = spi_read_status_register(); + /* If there is block protection in effect, unprotect it first. */ + if ((status & 0x3c) != 0) { + printf_debug("Some block protection in effect, disabling\n"); + result = spi_write_status_register(status & ~0x3c); + if (result) { + fprintf(stderr, "spi_write_status_register failed\n"); + return result; + } + } + return 0; +} + +int spi_nbyte_read(int address, uint8_t *bytes, int len) +{ + const unsigned char cmd[JEDEC_READ_OUTSIZE] = { + JEDEC_READ, + (address >> 16) & 0xff, + (address >> 8) & 0xff, + (address >> 0) & 0xff, + }; + + /* Send Read */ + return spi_send_command(sizeof(cmd), len, cmd, bytes); +} + +/* + * Read a complete flash chip. + * Each page is read separately in chunks with a maximum size of chunksize. + */ +int spi_read_chunked(struct flashchip *flash, uint8_t *buf, int start, int len, int chunksize) +{ + int rc = 0; + int i, j, starthere, lenhere; + int page_size = flash->page_size; + int toread; + + /* Warning: This loop has a very unusual condition and body. + * The loop needs to go through each page with at least one affected + * byte. The lowest page number is (start / page_size) since that + * division rounds down. The highest page number we want is the page + * where the last byte of the range lives. That last byte has the + * address (start + len - 1), thus the highest page number is + * (start + len - 1) / page_size. Since we want to include that last + * page as well, the loop condition uses <=. + */ + for (i = start / page_size; i <= (start + len - 1) / page_size; i++) { + /* Byte position of the first byte in the range in this page. */ + /* starthere is an offset to the base address of the chip. */ + starthere = max(start, i * page_size); + /* Length of bytes in the range in this page. */ + lenhere = min(start + len, (i + 1) * page_size) - starthere; + for (j = 0; j < lenhere; j += chunksize) { + toread = min(chunksize, lenhere - j); + rc = spi_nbyte_read(starthere + j, buf + starthere - start + j, toread); + if (rc) + break; + } + if (rc) + break; + } + + return rc; +} + +/* + * Program chip using byte programming. (SLOW!) + * This is for chips which can only handle one byte writes + * and for chips where memory mapped programming is impossible + * (e.g. due to size constraints in IT87* for over 512 kB) + */ +int spi_chip_write_1(struct flashchip *flash, uint8_t *buf) +{ + int total_size = 1024 * flash->total_size; + int i, result = 0; + + spi_disable_blockprotect(); + /* Erase first */ + printf("Erasing flash before programming... "); + if (erase_flash(flash)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + printf("done.\n"); + for (i = 0; i < total_size; i++) { + result = spi_byte_program(i, buf[i]); + if (result) + return 1; + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(10); + } + + return 0; +} + +int spi_aai_write(struct flashchip *flash, uint8_t *buf) +{ + uint32_t pos = 2, size = flash->total_size * 1024; + unsigned char w[6] = {0xad, 0, 0, 0, buf[0], buf[1]}; + int result; + + switch (spi_controller) { +#if INTERNAL_SUPPORT == 1 + case SPI_CONTROLLER_WBSIO: + fprintf(stderr, "%s: impossible with Winbond SPI masters," + " degrading to byte program\n", __func__); + return spi_chip_write_1(flash, buf); +#endif + default: + break; + } + if (erase_flash(flash)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; + } + /* FIXME: This will fail on ICH/VIA SPI. */ + result = spi_write_enable(); + if (result) + return result; + spi_send_command(6, 0, w, NULL); + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(5); /* SST25VF040B Tbp is max 10us */ + while (pos < size) { + w[1] = buf[pos++]; + w[2] = buf[pos++]; + spi_send_command(3, 0, w, NULL); + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) + programmer_delay(5); /* SST25VF040B Tbp is max 10us */ + } + spi_write_disable(); + return 0; +} |