1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
|
/*
* This file is part of the flashrom project.
*
* Copyright (C) 2021 The Chromium OS Authors
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/i2c-dev.h>
#include <linux/i2c.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include "flash.h"
#include "i2c_helper.h"
#include "programmer.h"
#include "spi.h"
#define ISP_PORT (0x92 >> 1)
#define DEBUG_PORT (0xb2 >> 1)
#define MTK_CMD_WRITE 0x10
#define MTK_CMD_READ 0x11
#define MTK_CMD_END 0x12
struct mediatek_data {
int fd;
unsigned long funcs;
};
// Returns null pointer on error.
static const struct mediatek_data *get_data_from_context(
const struct flashctx *flash)
{
if (!flash || !flash->mst || !flash->mst->spi.data) {
msg_pdbg("Unable to extract data from flash context\n");
return NULL;
}
return (const struct mediatek_data *)flash->mst->spi.data;
}
// Returns bytes read, negative value on error.
static int read_raw(const struct mediatek_data *port, uint16_t addr,
uint8_t *buf, size_t len)
{
int ret;
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
msg_pdbg("Invalid length for read command: %zu\n", len);
return SPI_INVALID_LENGTH;
}
ret = ioctl(port->fd, I2C_SLAVE, addr);
if (ret) {
msg_pdbg("Failed to set slave address 0x%02x (%d)\n", addr, ret);
return ret;
}
if (port->funcs & I2C_FUNC_I2C) {
// Use raw I2C read.
uint8_t command = MTK_CMD_READ;
if (write(port->fd, &command, 1) != 1) {
return SPI_GENERIC_ERROR;
}
if (read(port->fd, buf, len) != (int)len) {
return SPI_GENERIC_ERROR;
}
return len;
}
union i2c_smbus_data data = {
.block[0] = len,
};
struct i2c_smbus_ioctl_data args = {
.read_write = I2C_SMBUS_READ,
.command = MTK_CMD_READ,
.size = I2C_SMBUS_I2C_BLOCK_DATA,
.data = &data,
};
ret = ioctl(port->fd, I2C_SMBUS, &args);
if (ret) {
msg_pdbg("Failed to read SMBus I2C block data\n");
return ret;
}
memcpy(buf, args.data->block + 1, len);
return args.data->block[0];
}
// Returns non-zero value on error.
static int write_command(const struct mediatek_data *port, uint16_t addr,
uint8_t command, const uint8_t *buf, size_t len)
{
int ret;
if (len > I2C_SMBUS_BLOCK_MAX) {
msg_pdbg("Invalid length for write command: %zu\n", len);
return SPI_INVALID_LENGTH;
}
ret = ioctl(port->fd, I2C_SLAVE, addr);
if (ret) {
msg_pdbg("Failed to set slave address: 0x%02x\n", addr);
return ret;
}
if (port->funcs & I2C_FUNC_I2C) {
// Use raw I2C write.
uint8_t raw_buffer[I2C_SMBUS_BLOCK_MAX + 1];
raw_buffer[0] = command;
if (len > 0) {
memcpy(raw_buffer + 1, buf, len);
}
if (write(port->fd, raw_buffer, len + 1) != (int)(len + 1)) {
return SPI_GENERIC_ERROR;
}
return 0;
}
union i2c_smbus_data data = {0};
struct i2c_smbus_ioctl_data args = {
.read_write = I2C_SMBUS_WRITE,
.command = command,
.data = &data,
};
// Special case single byte commands, as empty I2C block data commands
// failed on this component in practice.
if (len == 0) {
args.size = I2C_SMBUS_BYTE;
ret = ioctl(port->fd, I2C_SMBUS, &args);
if (ret) {
msg_pdbg("Failed to write SMBus byte: 0x%02x\n", command);
}
return ret;
}
args.size = I2C_SMBUS_I2C_BLOCK_DATA;
data.block[0] = len;
if (buf && len) {
memcpy(data.block + 1, buf, len);
}
ret = ioctl(port->fd, I2C_SMBUS, &args);
if (ret) {
msg_pdbg("Failed to write SMBus I2C block data: 0x%02x\n", command);
}
return ret;
}
// Returns non-zero value on error.
static int write_raw(const struct mediatek_data *port, uint16_t addr,
const uint8_t *buf, size_t len)
{
if (len < 1) {
msg_pdbg("Invalid write length: %zu\n", len);
return SPI_INVALID_LENGTH;
}
return write_command(port, addr, buf[0], buf + 1, len - 1);
}
// Read from a GPIO register via debug port. Returns non-zero value on error.
static int mediatek_read_gpio(const struct mediatek_data *port,
uint16_t gpio_addr, uint8_t *value)
{
int ret;
uint8_t data[2];
data[0] = gpio_addr >> 8;
data[1] = gpio_addr & 0xff;
ret = write_command(port, DEBUG_PORT, MTK_CMD_WRITE, data, ARRAY_SIZE(data));
if (ret) {
msg_pdbg("Failed to issue read GPIO command at address 0x%04x\n", gpio_addr);
return ret;
}
size_t len = 1;
ret = read_raw(port, DEBUG_PORT, value, len);
if (ret < 0) {
msg_pdbg("Failed to read GPIO register at address 0x%04x\n", gpio_addr);
return ret;
}
if (ret != 1) {
msg_pdbg("GPIO read returned improper length: %d\n", ret);
return SPI_INVALID_LENGTH;
}
return 0;
}
// Write to a GPIO register via the debug port. Returns non-zero value on error.
static int mediatek_write_gpio(const struct mediatek_data *port,
uint16_t gpio_addr, uint8_t value)
{
uint8_t data[3];
data[0] = gpio_addr >> 8;
data[1] = gpio_addr & 0xff;
data[2] = value;
return write_command(port, DEBUG_PORT, MTK_CMD_WRITE, data, ARRAY_SIZE(data));
}
// Write a single bit value to a GPIO register via the debug port. Returns
// non-zero value on error.
static int mediatek_set_gpio_bit(const struct mediatek_data *port,
uint16_t gpio_addr, int bit, int value)
{
int ret;
uint8_t data;
ret = mediatek_read_gpio(port, gpio_addr, &data);
if (ret) {
msg_pdbg("Failed to read GPIO 0x%04x\n", gpio_addr);
return ret;
}
if (value) {
data |= (1 << bit);
} else {
data &= ~(1 << bit);
}
ret = mediatek_write_gpio(port, gpio_addr, data);
if (ret) {
msg_pdbg("Failed to set GPIO 0x%04x to 0x%02x\n", gpio_addr, data);
return ret;
}
return ret;
}
// Poke the GPIO line that goes to SPI WP# using the MST9U GPIO register
// addresses. Returns non-zero value on error.
static int mediatek_set_write_protect(const struct mediatek_data *port,
int protected)
{
int ret;
ret = mediatek_set_gpio_bit(port, 0x426, 7, (protected == 0));
if (ret) {
msg_perr("Failed to set GPIO out value: %d\n", protected == 0);
return ret;
}
ret = mediatek_set_gpio_bit(port, 0x428, 7, (protected != 0));
if (ret) {
msg_perr("Failed to set GPIO enable value: %d\n", protected != 0);
return ret;
}
return 0;
}
// Enter serial debug mode using "Option 1" for MST9U and select I2C channel 0
// to configure write protect GPIOs. Returns non-zero value on error.
static int mediatek_enter_serial_debug_mode(const struct mediatek_data *port)
{
int ret;
uint8_t enter_serial_debug[] = { 'S', 'E', 'R', 'D', 'B' };
ret = write_raw(port, DEBUG_PORT, enter_serial_debug,
ARRAY_SIZE(enter_serial_debug));
if (ret) {
msg_perr("Failed to send enter serial debug mode command\n");
return ret;
}
uint8_t enter_single_step_1[] = { 0xc0, 0xc1, 0x53 };
ret = write_command(port, DEBUG_PORT, MTK_CMD_WRITE,
enter_single_step_1, ARRAY_SIZE(enter_single_step_1));
if (ret) {
msg_perr("Failed to enter serial single step mode (part 1)\n");
return ret;
}
uint8_t enter_single_step_2[] = { 0x1f, 0xc1, 0x53 };
ret = write_command(port, DEBUG_PORT, MTK_CMD_WRITE, enter_single_step_2,
ARRAY_SIZE(enter_single_step_2));
if (ret) {
msg_perr("Failed to enter serial single step mode (part 2)\n");
return ret;
}
// Send each I2C channel 0 configuration byte individually.
uint8_t i2c_channel_0_config[] =
{ 0x80, 0x82, 0x84, 0x51, 0x7f, 0x37, 0x61 };
for (size_t i = 0; i < ARRAY_SIZE(i2c_channel_0_config); ++i) {
ret = write_command(
port, DEBUG_PORT, i2c_channel_0_config[i], NULL, 0);
if (ret) {
msg_perr("Failed to configure i2c channel 0: 0x%02x\n",
i2c_channel_0_config[i]);
return ret;
}
}
uint8_t enter_single_step_3[] = { 0x00, 0x00, 0x00 };
ret = write_command(port, DEBUG_PORT, MTK_CMD_WRITE, enter_single_step_3,
ARRAY_SIZE(enter_single_step_3));
if (ret) {
msg_perr("Failed to enter serial single step mode (part 3)\n");
return ret;
}
ret = write_command(port, DEBUG_PORT, 0x35, NULL, 0);
if (ret) {
msg_perr("Failed to send serial debug command (part 1)\n");
return ret;
}
ret = write_command(port, DEBUG_PORT, 0x71, NULL, 0);
if (ret) {
msg_perr("Failed to send serial debug command (part 2)\n");
return ret;
}
return 0;
}
// Returns non-zero value on error.
static int mediatek_enter_isp(const struct mediatek_data *port)
{
int ret;
ret = mediatek_enter_serial_debug_mode(port);
if (ret) {
msg_perr("Failed to enter serial debug mode\n");
return ret;
}
// MediaTek documentation says to do this twice just in case.
uint8_t enter_isp[] = { 'M', 'S', 'T', 'A', 'R' };
ret = write_raw(port, ISP_PORT, enter_isp, ARRAY_SIZE(enter_isp));
if (ret) {
msg_gwarn("Failed to enter ISP mode, trying again\n");
}
ret = write_raw(port, ISP_PORT, enter_isp, ARRAY_SIZE(enter_isp));
if (ret) {
msg_gwarn("Might already be in ISP mode, ignoring\n");
}
ret = mediatek_set_write_protect(port, 0);
if (ret) {
msg_perr("Failed to disable write protection\n");
return ret;
}
return 0;
}
// Returns non-zero value on error.
static int mediatek_exit_isp(const struct mediatek_data *port)
{
int ret;
ret = mediatek_set_write_protect(port, 1);
if (ret) {
msg_perr("Failed to re-enable write protect\n");
return ret;
}
uint8_t exit_single_step[] = { 0xc0, 0xc1, 0xff };
ret = write_command(port, DEBUG_PORT, MTK_CMD_WRITE, exit_single_step,
ARRAY_SIZE(exit_single_step));
if (ret) {
msg_perr("Failed to exit single step mode\n");
return ret;
}
ret = write_command(port, DEBUG_PORT, 0x34, NULL, 0);
if (ret) {
msg_perr("Failed to exit serial debug mode (1), ignoring\n");
}
ret = write_command(port, DEBUG_PORT, 0x45, NULL, 0);
if (ret) {
msg_perr("Failed to exit serial debug mode (2), ignoring\n");
}
ret = write_command(port, ISP_PORT, 0x24, NULL, 0);
if (ret) {
msg_perr("Failed to exit ISP mode command, ignoring\n");
}
return 0;
}
static int mediatek_send_command(const struct flashctx *flash,
unsigned int writecnt, unsigned int readcnt,
const uint8_t *writearr, uint8_t *readarr)
{
const struct mediatek_data *port = get_data_from_context(flash);
if (!port) {
msg_perr("Failed to extract chip data for ISP command\n");
return SPI_GENERIC_ERROR;
}
int ret;
if (writecnt) {
ret = write_command(port, ISP_PORT, MTK_CMD_WRITE,
writearr, writecnt);
if (ret) {
msg_perr("Failed to issue ISP write command\n");
return ret;
}
}
if (readcnt) {
size_t len = readcnt;
ret = read_raw(port, ISP_PORT, readarr, len);
if (ret < 0) {
msg_perr("Failed to read ISP command result\n");
return ret;
}
if (ret != (int)readcnt) {
msg_perr("Read length mismatched: expected %u got %d\n", readcnt, ret);
return SPI_INVALID_LENGTH;
}
}
// End the current command.
ret = write_command(port, ISP_PORT, MTK_CMD_END, NULL, 0);
if (ret) {
msg_perr("Failed to end ISP command\n");
return ret;
}
return 0;
}
static int mediatek_shutdown(void *data)
{
int ret = 0;
struct mediatek_data *port = (struct mediatek_data *)data;
ret |= mediatek_exit_isp(port);
i2c_close(port->fd);
free(data);
return ret;
}
static const struct spi_master spi_master_i2c_mediatek = {
.max_data_read = I2C_SMBUS_BLOCK_MAX,
// Leave room for 1-byte command and up to a 4-byte address.
.max_data_write = I2C_SMBUS_BLOCK_MAX - 5,
.command = mediatek_send_command,
.multicommand = default_spi_send_multicommand,
.read = default_spi_read,
.write_256 = default_spi_write_256,
.write_aai = default_spi_write_aai,
.shutdown = mediatek_shutdown,
.probe_opcode = default_spi_probe_opcode,
};
static int get_params(const struct programmer_cfg *cfg, bool *allow_brick)
{
char *brick_str = NULL;
int ret = 0;
*allow_brick = false; /* Default behaviour is to bail. */
brick_str = extract_programmer_param_str(cfg, "allow_brick");
if (brick_str) {
if (!strcmp(brick_str, "yes")) {
*allow_brick = true;
} else {
msg_perr("%s: Incorrect param format, allow_brick=yes.\n", __func__);
ret = SPI_GENERIC_ERROR;
}
}
free(brick_str);
return ret;
}
static int mediatek_init(const struct programmer_cfg *cfg)
{
int ret;
bool allow_brick;
if (get_params(cfg, &allow_brick))
return SPI_GENERIC_ERROR;
/*
* TODO: Once board_enable can facilitate safe i2c allow listing
* then this can be removed.
*/
if (!allow_brick) {
msg_perr("%s: For i2c drivers you must explicitly 'allow_brick=yes'. ", __func__);
msg_perr("There is currently no way to determine if the programmer works on a board "
"as i2c device address space can be overloaded. Set 'allow_brick=yes' if "
"you are sure you know what you are doing.\n");
return SPI_GENERIC_ERROR;
}
int fd = i2c_open_from_programmer_params(cfg, ISP_PORT, 0);
if (fd < 0) {
msg_perr("Failed to open i2c\n");
return fd;
}
struct mediatek_data *port = calloc(1, sizeof(*port));
if (!port) {
msg_perr("Unable to allocate space for SPI master data\n");
i2c_close(fd);
return SPI_GENERIC_ERROR;
}
port->fd = fd;
ret = ioctl(fd, I2C_FUNCS, &(port->funcs));
if (ret) {
msg_perr("Failed to fetch I2C bus functionality\n");
free(port);
i2c_close(fd);
return ret;
}
ret = mediatek_enter_isp(port);
if (ret) {
msg_perr("Failed to enter ISP mode\n");
free(port);
i2c_close(fd);
return ret;
}
return register_spi_master(&spi_master_i2c_mediatek, port);
}
const struct programmer_entry programmer_mediatek_i2c_spi = {
.name = "mediatek_i2c_spi",
.type = OTHER,
.devs.note = "Device files /dev/i2c-*\n",
.init = mediatek_init,
.map_flash_region = fallback_map,
.unmap_flash_region = fallback_unmap,
.delay = internal_delay,
};
|