path: root/spi25.c

/*
 * This file is part of the flashrom project.
 *
 * Copyright (C) 2007, 2008, 2009, 2010 Carl-Daniel Hailfinger
 * Copyright (C) 2008 coresystems GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/*
 * Contains the common SPI chip driver functions
 */

#include <stddef.h>
#include <string.h>
#include <stdbool.h>
#include "flash.h"
#include "flashchips.h"
#include "chipdrivers.h"
#include "programmer.h"
#include "hwaccess.h"
#include "spi.h"

static int spi_rdid(struct flashctx *flash, unsigned char *readarr, int bytes)
{
	static const unsigned char cmd[JEDEC_RDID_OUTSIZE] = { JEDEC_RDID };
	int ret;
	int i;

	ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
	if (ret)
		return ret;
	msg_cspew("RDID returned");
	for (i = 0; i < bytes; i++)
		msg_cspew(" 0x%02x", readarr[i]);
	msg_cspew(". ");
	return 0;
}

static int spi_rems(struct flashctx *flash, unsigned char *readarr)
{
	static const unsigned char cmd[JEDEC_REMS_OUTSIZE] = { JEDEC_REMS, };
	int ret;

	ret = spi_send_command(flash, sizeof(cmd), JEDEC_REMS_INSIZE, cmd, readarr);
	if (ret)
		return ret;
	msg_cspew("REMS returned 0x%02x 0x%02x. ", readarr[0], readarr[1]);
	return 0;
}

static int spi_res(struct flashctx *flash, unsigned char *readarr, int bytes)
{
	static const unsigned char cmd[JEDEC_RES_OUTSIZE] = { JEDEC_RES, };
	int ret;
	int i;

	ret = spi_send_command(flash, sizeof(cmd), bytes, cmd, readarr);
	if (ret)
		return ret;
	msg_cspew("RES returned");
	for (i = 0; i < bytes; i++)
		msg_cspew(" 0x%02x", readarr[i]);
	msg_cspew(". ");
	return 0;
}

int spi_write_enable(struct flashctx *flash)
{
	static const unsigned char cmd[JEDEC_WREN_OUTSIZE] = { JEDEC_WREN };
	int result;

	/* Send WREN (Write Enable) */
	result = spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);

	if (result)
		msg_cerr("%s failed\n", __func__);

	return result;
}

int spi_write_disable(struct flashctx *flash)
{
	static const unsigned char cmd[JEDEC_WRDI_OUTSIZE] = { JEDEC_WRDI };

	/* Send WRDI (Write Disable) */
	return spi_send_command(flash, sizeof(cmd), 0, cmd, NULL);
}

static int probe_spi_rdid_generic(struct flashctx *flash, int bytes)
{
	const struct flashchip *chip = flash->chip;
	unsigned char readarr[4];
	uint32_t id1;
	uint32_t id2;

	const int ret = spi_rdid(flash, readarr, bytes);
	if (ret == SPI_INVALID_LENGTH)
		msg_cinfo("%d byte RDID not supported on this SPI controller\n", bytes);
	if (ret)
		return 0;

	if (!oddparity(readarr[0]))
		msg_cdbg("RDID byte 0 parity violation. ");

	/* Check if this is a continuation vendor ID.
	 * FIXME: Handle continuation device IDs.
	 */
	if (readarr[0] == 0x7f) {
		if (!oddparity(readarr[1]))
			msg_cdbg("RDID byte 1 parity violation. ");
		id1 = (readarr[0] << 8) | readarr[1];
		id2 = readarr[2];
		if (bytes > 3) {
			id2 <<= 8;
			id2 |= readarr[3];
		}
	} else {
		id1 = readarr[0];
		id2 = (readarr[1] << 8) | readarr[2];
	}

	msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);

	if (id1 == chip->manufacture_id && id2 == chip->model_id)
		return 1;

	/* Test if this is a pure vendor match. */
	if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
		return 1;

	/* Test if there is any vendor ID. */
	if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff && id1 != 0x00)
		return 1;

	return 0;
}

int probe_spi_rdid(struct flashctx *flash)
{
	return probe_spi_rdid_generic(flash, 3);
}

int probe_spi_rdid4(struct flashctx *flash)
{
	return probe_spi_rdid_generic(flash, 4);
}

int probe_spi_rems(struct flashctx *flash)
{
	const struct flashchip *chip = flash->chip;
	unsigned char readarr[JEDEC_REMS_INSIZE];
	uint32_t id1, id2;

	if (spi_rems(flash, readarr)) {
		return 0;
	}

	id1 = readarr[0];
	id2 = readarr[1];

	msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);

	if (id1 == chip->manufacture_id && id2 == chip->model_id)
		return 1;

	/* Test if this is a pure vendor match. */
	if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id)
		return 1;

	/* Test if there is any vendor ID. */
	if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff && id1 != 0x00)
		return 1;

	return 0;
}

int probe_spi_res1(struct flashctx *flash)
{
	static const unsigned char allff[] = {0xff, 0xff, 0xff};
	static const unsigned char all00[] = {0x00, 0x00, 0x00};
	unsigned char readarr[3];
	uint32_t id2;

	/* We only want one-byte RES if RDID and REMS are unusable. */

	/* Check if RDID is usable and does not return 0xff 0xff 0xff or
	 * 0x00 0x00 0x00. In that case, RES is pointless.
	 */
	if (!spi_rdid(flash, readarr, 3) && memcmp(readarr, allff, 3) &&
	    memcmp(readarr, all00, 3)) {
		msg_cdbg("Ignoring RES in favour of RDID.\n");
		return 0;
	}
	/* Check if REMS is usable and does not return 0xff 0xff or
	 * 0x00 0x00. In that case, RES is pointless.
	 */
	if (!spi_rems(flash, readarr) &&
	    memcmp(readarr, allff, JEDEC_REMS_INSIZE) &&
	    memcmp(readarr, all00, JEDEC_REMS_INSIZE)) {
		msg_cdbg("Ignoring RES in favour of REMS.\n");
		return 0;
	}

	if (spi_res(flash, readarr, 1)) {
		return 0;
	}

	id2 = readarr[0];

	msg_cdbg("%s: id 0x%x\n", __func__, id2);

	if (id2 != flash->chip->model_id)
		return 0;

	return 1;
}

int probe_spi_res2(struct flashctx *flash)
{
	unsigned char readarr[2];
	uint32_t id1, id2;

	if (spi_res(flash, readarr, 2)) {
		return 0;
	}

	id1 = readarr[0];
	id2 = readarr[1];

	msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);

	if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id)
		return 0;

	return 1;
}

int probe_spi_res3(struct flashctx *flash)
{
	unsigned char readarr[3];
	uint32_t id1, id2;

	if (spi_res(flash, readarr, 3)) {
		return 0;
	}

	id1 = (readarr[0] << 8) | readarr[1];
	id2 = readarr[2];

	msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2);

	if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id)
		return 0;

	return 1;
}

/* Only used for some Atmel chips. */
int probe_spi_at25f(struct flashctx *flash)
{
	static const unsigned char cmd[AT25F_RDID_OUTSIZE] = { AT25F_RDID };
	unsigned char readarr[AT25F_RDID_INSIZE];
	uint32_t id1;
	uint32_t id2;

	if (spi_send_command(flash, sizeof(cmd), sizeof(readarr), cmd, readarr))
		return 0;

	id1 = readarr[0];
	id2 = readarr[1];

	msg_cdbg("%s: id1 0x%02x, id2 0x%02x\n", __func__, id1, id2);

	if (id1 == flash->chip->manufacture_id && id2 == flash->chip->model_id)
		return 1;

	return 0;
}

/* Used for probing 'big' Spansion/Cypress S25FS chips */
int probe_spi_big_spansion(struct flashctx *flash)
{
	static const unsigned char cmd = JEDEC_RDID;
	int ret;
	unsigned char dev_id[6]; /* We care only about 6 first bytes */

	ret = spi_send_command(flash, sizeof(cmd), sizeof(dev_id), &cmd, dev_id);

	if (!ret) {
		unsigned long i;

		for (i = 0; i < sizeof(dev_id); i++)
			msg_gdbg(" 0x%02x", dev_id[i]);
		msg_gdbg(".\n");

		if (dev_id[0] == flash->chip->manufacture_id) {
			union {
				uint8_t array[4];
				uint32_t whole;
			} model_id;

	/*
	 * The structure of the RDID output is as follows:
	 *
	 *     offset   value              meaning
	 *       00h     01h      Manufacturer ID for Spansion
	 *       01h     20h           128 Mb capacity
	 *       01h     02h           256 Mb capacity
	 *       02h     18h           128 Mb capacity
	 *       02h     19h           256 Mb capacity
	 *       03h     4Dh       Full size of the RDID output (ignored)
	 *       04h     00h       FS: 256-kB physical sectors
	 *       04h     01h       FS: 64-kB physical sectors
	 *       04h     00h       FL: 256-kB physical sectors
	 *       04h     01h       FL: Mix of 64-kB and 4KB overlayed sectors
	 *       05h     80h       FL family
	 *       05h     81h       FS family
	 *
	 * Need to use bytes 1, 2, 4, and 5 to properly identify one of eight
	 * possible chips:
	 *
	 * 2 types * 2 possible sizes * 2 possible sector layouts
	 *
	 */
			memcpy(model_id.array, dev_id + 1, 2);
			memcpy(model_id.array + 2, dev_id + 4, 2);
			if (be_to_cpu32(model_id.whole) == flash->chip->model_id)
				return 1;
		}
	}

	return 0;
}

/* Used for Spansion/Cypress S25F chips */
static int s25f_legacy_software_reset(struct flashctx *flash)
{
	int result;
	struct spi_command cmds[] = {
	{
		.writecnt	= 1,
		.writearr	= (const unsigned char[]){ CMD_RSTEN },
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= 1,
		.writearr	= (const unsigned char[]){ 0xf0 },
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= 0,
		.writearr	= NULL,
		.readcnt	= 0,
		.readarr	= NULL,
	}};

	result = spi_send_multicommand(flash, cmds);
	if (result) {
		msg_cerr("%s failed during command execution\n", __func__);
		return result;
	}
	/* Reset takes 35us according to data-sheet, double that for safety */
	programmer_delay(T_RPH * 2);

	return 0;
}

/* Only for Spansion S25FS chips, where legacy reset is disabled by default */
int s25fs_software_reset(struct flashctx *flash)
{
	int result;
	struct spi_command cmds[] = {
	{
		.writecnt	= 1,
		.writearr	= (const unsigned char[]){ CMD_RSTEN },
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= 1,
		.writearr	= (const unsigned char[]){ CMD_RST },
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= 0,
		.writearr	= NULL,
		.readcnt	= 0,
		.readarr	= NULL,
	}};

	msg_cdbg("Force resetting SPI chip.\n");
	result = spi_send_multicommand(flash, cmds);
	if (result) {
		msg_cerr("%s failed during command execution\n", __func__);
		return result;
	}

	programmer_delay(T_RPH * 2);

	return 0;
}

int spi_poll_wip(struct flashctx *const flash, const unsigned int poll_delay)
{
	uint8_t status_reg = spi_read_status_register(flash);

	/* FIXME: We don't time out. */
	while (status_reg & SPI_SR_WIP) {
		/*
		 * The WIP bit on S25F chips remains set to 1 if erase or
		 * programming errors occur, so we must check for those
		 * errors here. If an error is encountered, do a software
		 * reset to clear WIP and other volatile bits, otherwise
		 * the chip will be unresponsive to further commands.
		 */
		if (status_reg & SPI_SR_ERA_ERR) {
			msg_cerr("Erase error occurred\n");
			s25f_legacy_software_reset(flash);
			return -1;
		}
		if (status_reg & (1 << 6)) {
			msg_cerr("Programming error occurred\n");
			s25f_legacy_software_reset(flash);
			return -1;
		}
		programmer_delay(poll_delay);
		status_reg = spi_read_status_register(flash);
	}

	return 0;
}

/**
 * Execute WREN plus another one byte `op`, optionally poll WIP afterwards.
 *
 * @param flash       the flash chip's context
 * @param op          the operation to execute
 * @param poll_delay  interval in us for polling WIP, don't poll if zero
 * @return 0 on success, non-zero otherwise
 */
static int spi_simple_write_cmd(struct flashctx *const flash, const uint8_t op, const unsigned int poll_delay)
{
	struct spi_command cmds[] = {
	{
		.readarr = 0,
		.writecnt = 1,
		.writearr = (const unsigned char[]){ JEDEC_WREN },
	}, {
		.readarr = 0,
		.writecnt = 1,
		.writearr = (const unsigned char[]){ op },
	},
		NULL_SPI_CMD,
	};

	const int result = spi_send_multicommand(flash, cmds);
	if (result)
		msg_cerr("%s failed during command execution\n", __func__);

	const int status = poll_delay ? spi_poll_wip(flash, poll_delay) : 0;

	return result ? result : status;
}

static int spi_write_extended_address_register(struct flashctx *const flash, const uint8_t regdata)
{
	const uint8_t op = flash->chip->wrea_override ? : JEDEC_WRITE_EXT_ADDR_REG;
	struct spi_command cmds[] = {
	{
		.readarr = 0,
		.writecnt = 1,
		.writearr = (const unsigned char[]){ JEDEC_WREN },
	}, {
		.readarr = 0,
		.writecnt = 2,
		.writearr = (const unsigned char[]){ op, regdata },
	},
		NULL_SPI_CMD,
	};

	const int result = spi_send_multicommand(flash, cmds);
	if (result)
		msg_cerr("%s failed during command execution\n", __func__);
	return result;
}

int spi_set_extended_address(struct flashctx *const flash, const uint8_t addr_high)
{
	if (flash->address_high_byte != addr_high &&
	    spi_write_extended_address_register(flash, addr_high))
		return -1;
	flash->address_high_byte = addr_high;
	return 0;
}

static int spi_prepare_address(struct flashctx *const flash, uint8_t cmd_buf[],
			       const bool native_4ba, const unsigned int addr)
{
	if (native_4ba || flash->in_4ba_mode) {
		if (!spi_master_4ba(flash)) {
			msg_cwarn("4-byte address requested but master can't handle 4-byte addresses.\n");
			return -1;
		}
		cmd_buf[1] = (addr >> 24) & 0xff;
		cmd_buf[2] = (addr >> 16) & 0xff;
		cmd_buf[3] = (addr >>  8) & 0xff;
		cmd_buf[4] = (addr >>  0) & 0xff;
		return 4;
	} else {
		if (flash->chip->feature_bits & FEATURE_4BA_EXT_ADDR) {
			if (spi_set_extended_address(flash, addr >> 24))
				return -1;
		} else if (addr >> 24) {
			msg_cerr("Can't handle 4-byte address for opcode '0x%02x'\n"
				 "with this chip/programmer combination.\n", cmd_buf[0]);
			return -1;
		}
		cmd_buf[1] = (addr >> 16) & 0xff;
		cmd_buf[2] = (addr >>  8) & 0xff;
		cmd_buf[3] = (addr >>  0) & 0xff;
		return 3;
	}
}

/**
 * Execute WREN plus another `op` that takes an address and
 * optional data, poll WIP afterwards.
 *
 * @param flash       the flash chip's context
 * @param op          the operation to execute
 * @param native_4ba  whether `op` always takes a 4-byte address
 * @param addr        the address parameter to `op`
 * @param out_bytes   bytes to send after the address,
 *                    may be NULL if and only if `out_bytes` is 0
 * @param out_bytes   number of bytes to send, 256 at most, may be zero
 * @param poll_delay  interval in us for polling WIP
 * @return 0 on success, non-zero otherwise
 */
static int spi_write_cmd(struct flashctx *const flash, const uint8_t op,
			 const bool native_4ba, const unsigned int addr,
			 const uint8_t *const out_bytes, const size_t out_len,
			 const unsigned int poll_delay)
{
	uint8_t cmd[1 + JEDEC_MAX_ADDR_LEN + 256];
	struct spi_command cmds[] = {
	{
		.readarr = 0,
		.writecnt = 1,
		.writearr = (const unsigned char[]){ JEDEC_WREN },
	}, {
		.readarr = 0,
		.writearr = cmd,
	},
		NULL_SPI_CMD,
	};

	cmd[0] = op;
	const int addr_len = spi_prepare_address(flash, cmd, native_4ba, addr);
	if (addr_len < 0)
		return 1;

	if (1 + addr_len + out_len > sizeof(cmd)) {
		msg_cerr("%s called for too long a write\n", __func__);
		return 1;
	}
	if (!out_bytes && out_len > 0)
		return 1;

	memcpy(cmd + 1 + addr_len, out_bytes, out_len);
	cmds[1].writecnt = 1 + addr_len + out_len;

	const int result = spi_send_multicommand(flash, cmds);
	if (result)
		msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr);

	const int status = spi_poll_wip(flash, poll_delay);

	return result ? result : status;
}

static int spi_chip_erase_60(struct flashctx *flash)
{
	/* This usually takes 1-85s, so wait in 1s steps. */
	return spi_simple_write_cmd(flash, 0x60, 1000 * 1000);
}

static int spi_chip_erase_62(struct flashctx *flash)
{
	/* This usually takes 2-5s, so wait in 100ms steps. */
	return spi_simple_write_cmd(flash, 0x62, 100 * 1000);
}

static int spi_chip_erase_c7(struct flashctx *flash)
{
	/* This usually takes 1-85s, so wait in 1s steps. */
	return spi_simple_write_cmd(flash, 0xc7, 1000 * 1000);
}

int spi_block_erase_52(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	/* This usually takes 100-4000ms, so wait in 100ms steps. */
	return spi_write_cmd(flash, 0x52, false, addr, NULL, 0, 100 * 1000);
}

/* Block size is usually
 * 32M (one die) for Micron
 */
int spi_block_erase_c4(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 240-480s, so wait in 500ms steps. */
	return spi_write_cmd(flash, 0xc4, false, addr, NULL, 0, 500 * 1000);
}

/* Block size is usually
 * 64k for Macronix
 * 32k for SST
 * 4-32k non-uniform for EON
 */
int spi_block_erase_d8(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	/* This usually takes 100-4000ms, so wait in 100ms steps. */
	return spi_write_cmd(flash, 0xd8, false, addr, NULL, 0, 100 * 1000);
}

/* Used on Spansion/Cypress S25FS chips */
int s25fs_block_erase_d8(struct flashctx *flash,
		unsigned int addr, unsigned int blocklen)
{
	unsigned char cfg;
	int result;
	static int cr3nv_checked = 0;

	struct spi_command erase_cmds[] = {
	{
		.writecnt	= JEDEC_WREN_OUTSIZE,
		.writearr	= (const unsigned char[]){ JEDEC_WREN },
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= JEDEC_BE_D8_OUTSIZE,
		.writearr	= (const unsigned char[]){
					JEDEC_BE_D8,
					(addr >> 16) & 0xff,
					(addr >> 8) & 0xff,
					(addr & 0xff)
				},
		.readcnt	= 0,
		.readarr	= NULL,
	}, {
		.writecnt	= 0,
		.writearr	= NULL,
		.readcnt	= 0,
		.readarr	= NULL,
	}};

	/* Check if hybrid sector architecture is in use and, if so,
	 * switch to uniform sectors. */
	if (!cr3nv_checked) {
		cfg = s25fs_read_cr(flash, CR3NV_ADDR);
		if (!(cfg & CR3NV_20H_NV)) {
			s25fs_write_cr(flash, CR3NV_ADDR, cfg | CR3NV_20H_NV);
			s25fs_software_reset(flash);

			cfg = s25fs_read_cr(flash, CR3NV_ADDR);
			if (!(cfg & CR3NV_20H_NV)) {
				msg_cerr("%s: Unable to enable uniform "
					"block sizes.\n", __func__);
				return 1;
			}

			msg_cdbg("\n%s: CR3NV updated (0x%02x -> 0x%02x)\n",
					__func__, cfg,
					s25fs_read_cr(flash, CR3NV_ADDR));
			/* Restore CR3V when flashrom exits */
			register_chip_restore(s25fs_restore_cr3nv, flash, cfg);
		}

		cr3nv_checked = 1;
	}

	result = spi_send_multicommand(flash, erase_cmds);
	if (result) {
		msg_cerr("%s failed during command execution at address 0x%x\n",
			__func__, addr);
		return result;
	}

	programmer_delay(T_SE);
	return spi_poll_wip(flash, 1000 * 10);
}

/* Block size is usually
 * 4k for PMC
 */
int spi_block_erase_d7(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	/* This usually takes 100-4000ms, so wait in 100ms steps. */
	return spi_write_cmd(flash, 0xd7, false, addr, NULL, 0, 100 * 1000);
}

/* Page erase (usually 256B blocks) */
int spi_block_erase_db(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This takes up to 20ms usually (on worn out devices
	   up to the 0.5s range), so wait in 1ms steps. */
	return spi_write_cmd(flash, 0xdb, false, addr, NULL, 0, 1 * 1000);
}

/* Sector size is usually 4k, though Macronix eliteflash has 64k */
int spi_block_erase_20(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	/* This usually takes 15-800ms, so wait in 10ms steps. */
	return spi_write_cmd(flash, 0x20, false, addr, NULL, 0, 10 * 1000);
}

int spi_block_erase_50(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 10ms, so wait in 1ms steps. */
	return spi_write_cmd(flash, 0x50, false, addr, NULL, 0, 1 * 1000);
}

int spi_block_erase_81(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 8ms, so wait in 1ms steps. */
	return spi_write_cmd(flash, 0x81, false, addr, NULL, 0, 1 * 1000);
}

int spi_block_erase_60(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
		msg_cerr("%s called with incorrect arguments\n",
			__func__);
		return -1;
	}
	return spi_chip_erase_60(flash);
}

int spi_block_erase_62(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
		msg_cerr("%s called with incorrect arguments\n",
			__func__);
		return -1;
	}
	return spi_chip_erase_62(flash);
}

int spi_block_erase_c7(struct flashctx *flash, unsigned int addr,
		       unsigned int blocklen)
{
	if ((addr != 0) || (blocklen != flash->chip->total_size * 1024)) {
		msg_cerr("%s called with incorrect arguments\n",
			__func__);
		return -1;
	}
	return spi_chip_erase_c7(flash);
}

/* Erase 4 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes) */
int spi_block_erase_21(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 15-800ms, so wait in 10ms steps. */
	return spi_write_cmd(flash, 0x21, true, addr, NULL, 0, 10 * 1000);
}

/* Erase 32 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes) */
int spi_block_erase_5c(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 100-4000ms, so wait in 100ms steps. */
	return spi_write_cmd(flash, 0x5c, true, addr, NULL, 0, 100 * 1000);
}

/* Erase 64 KB of flash with 4-bytes address from ANY mode (3-bytes or 4-bytes) */
int spi_block_erase_dc(struct flashctx *flash, unsigned int addr, unsigned int blocklen)
{
	/* This usually takes 100-4000ms, so wait in 100ms steps. */
	return spi_write_cmd(flash, 0xdc, true, addr, NULL, 0, 100 * 1000);
}

erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode)
{
	switch(opcode){
	case 0xff:
	case 0x00:
		/* Not specified, assuming "not supported". */
		return NULL;
	case 0x20:
		return &spi_block_erase_20;
	case 0x21:
		return &spi_block_erase_21;
	case 0x50:
		return &spi_block_erase_50;
	case 0x52:
		return &spi_block_erase_52;
	case 0x5c:
		return &spi_block_erase_5c;
	case 0x60:
		return &spi_block_erase_60;
	case 0x62:
		return &spi_block_erase_62;
	case 0x81:
		return &spi_block_erase_81;
	case 0xc4:
		return &spi_block_erase_c4;
	case 0xc7:
		return &spi_block_erase_c7;
	case 0xd7:
		return &spi_block_erase_d7;
	case 0xd8:
		return &spi_block_erase_d8;
	case 0xdb:
		return &spi_block_erase_db;
	case 0xdc:
		return &spi_block_erase_dc;
	default:
		msg_cinfo("%s: unknown erase opcode (0x%02x). Please report "
			  "this at flashrom@flashrom.org\n", __func__, opcode);
		return NULL;
	}
}

static int spi_nbyte_program(struct flashctx *flash, unsigned int addr, const uint8_t *bytes, unsigned int len)
{
	const bool native_4ba = flash->chip->feature_bits & FEATURE_4BA_WRITE && spi_master_4ba(flash);
	const uint8_t op = native_4ba ? JEDEC_BYTE_PROGRAM_4BA : JEDEC_BYTE_PROGRAM;
	return spi_write_cmd(flash, op, native_4ba, addr, bytes, len, 10);
}

int spi_nbyte_read(struct flashctx *flash, unsigned int address, uint8_t *bytes,
		   unsigned int len)
{
	const bool native_4ba =	flash->chip->feature_bits & FEATURE_4BA_READ && spi_master_4ba(flash);
	uint8_t cmd[1 + JEDEC_MAX_ADDR_LEN] = { native_4ba ? JEDEC_READ_4BA : JEDEC_READ, };

	const int addr_len = spi_prepare_address(flash, cmd, native_4ba, address);
	if (addr_len < 0)
		return 1;

	/* Send Read */
	return spi_send_command(flash, 1 + addr_len, len, cmd, bytes);
}

/*
 * Read a part of the flash chip.
 * Data is read in chunks with a maximum size of chunksize.
 */
int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start,
		     unsigned int len, unsigned int chunksize)
{
	int ret;
	size_t to_read;
	for (; len; len -= to_read, buf += to_read, start += to_read) {
		to_read = min(chunksize, len);
		ret = spi_nbyte_read(flash, start, buf, to_read);
		if (ret)
			return ret;
	}
	return 0;
}

/*
 * Write a part of the flash chip.
 * FIXME: Use the chunk code from Michael Karcher instead.
 * Each page is written separately in chunks with a maximum size of chunksize.
 */
int spi_write_chunked(struct flashctx *flash, const uint8_t *buf, unsigned int start,
		      unsigned int len, unsigned int chunksize)
{
	unsigned int i, j, starthere, lenhere, towrite;
	/* FIXME: page_size is the wrong variable. We need max_writechunk_size
	 * in struct flashctx to do this properly. All chips using
	 * spi_chip_write_256 have page_size set to max_writechunk_size, so
	 * we're OK for now.
	 */
	unsigned int page_size = flash->chip->page_size;

	/* Warning: This loop has a very unusual condition and body.
	 * The loop needs to go through each page with at least one affected
	 * byte. The lowest page number is (start / page_size) since that
	 * division rounds down. The highest page number we want is the page
	 * where the last byte of the range lives. That last byte has the
	 * address (start + len - 1), thus the highest page number is
	 * (start + len - 1) / page_size. Since we want to include that last
	 * page as well, the loop condition uses <=.
	 */
	for (i = start / page_size; i <= (start + len - 1) / page_size; i++) {
		/* Byte position of the first byte in the range in this page. */
		/* starthere is an offset to the base address of the chip. */
		starthere = max(start, i * page_size);
		/* Length of bytes in the range in this page. */
		lenhere = min(start + len, (i + 1) * page_size) - starthere;
		for (j = 0; j < lenhere; j += chunksize) {
			int rc;

			towrite = min(chunksize, lenhere - j);
			rc = spi_nbyte_program(flash, starthere + j, buf + starthere - start + j, towrite);
			if (rc)
				return rc;
		}
	}

	return 0;
}

/*
 * Program chip using byte programming. (SLOW!)
 * This is for chips which can only handle one byte writes
 * and for chips where memory mapped programming is impossible
 * (e.g. due to size constraints in IT87* for over 512 kB)
 */
/* real chunksize is 1, logical chunksize is 1 */
int spi_chip_write_1(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len)
{
	unsigned int i;

	for (i = start; i < start + len; i++) {
		if (spi_nbyte_program(flash, i, buf + i - start, 1))
			return 1;
	}
	return 0;
}

int default_spi_write_aai(struct flashctx *flash, const uint8_t *buf, unsigned int start, unsigned int len)
{
	uint32_t pos = start;
	int result;
	unsigned char cmd[JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE] = {
		JEDEC_AAI_WORD_PROGRAM,
	};

	/* The even start address and even length requirements can be either
	 * honored outside this function, or we can call spi_byte_program
	 * for the first and/or last byte and use AAI for the rest.
	 * FIXME: Move this to generic code.
	 */
	/* The data sheet requires a start address with the low bit cleared. */
	if (start % 2) {
		msg_cerr("%s: start address not even! Please report a bug at "
			 "flashrom@flashrom.org\n", __func__);
		if (spi_chip_write_1(flash, buf, start, start % 2))
			return SPI_GENERIC_ERROR;
		pos += start % 2;
		/* Do not return an error for now. */
		//return SPI_GENERIC_ERROR;
	}
	/* The data sheet requires total AAI write length to be even. */
	if (len % 2) {
		msg_cerr("%s: total write length not even! Please report a "
			 "bug at flashrom@flashrom.org\n", __func__);
		/* Do not return an error for now. */
		//return SPI_GENERIC_ERROR;
	}

	result = spi_write_cmd(flash, JEDEC_AAI_WORD_PROGRAM, false, start, buf + pos - start, 2, 10);
	if (result)
		goto bailout;

	/* We already wrote 2 bytes in the multicommand step. */
	pos += 2;

	/* Are there at least two more bytes to write? */
	while (pos < start + len - 1) {
		cmd[1] = buf[pos++ - start];
		cmd[2] = buf[pos++ - start];
		result = spi_send_command(flash, JEDEC_AAI_WORD_PROGRAM_CONT_OUTSIZE, 0, cmd, NULL);
		if (result != 0) {
			msg_cerr("%s failed during followup AAI command execution: %d\n", __func__, result);
			goto bailout;
		}
		if (spi_poll_wip(flash, 10))
			goto bailout;
	}

	/* Use WRDI to exit AAI mode. This needs to be done before issuing any other non-AAI command. */
	result = spi_write_disable(flash);
	if (result != 0) {
		msg_cerr("%s failed to disable AAI mode.\n", __func__);
		return SPI_GENERIC_ERROR;
	}

	/* Write remaining byte (if any). */
	if (pos < start + len) {
		if (spi_chip_write_1(flash, buf + pos - start, pos, pos % 2))
			return SPI_GENERIC_ERROR;
	}

	return 0;

bailout:
	result = spi_write_disable(flash);
	if (result != 0)
		msg_cerr("%s failed to disable AAI mode.\n", __func__);
	return SPI_GENERIC_ERROR;
}

static int spi_enter_exit_4ba(struct flashctx *const flash, const bool enter)
{
	const unsigned char cmd = enter ? JEDEC_ENTER_4_BYTE_ADDR_MODE : JEDEC_EXIT_4_BYTE_ADDR_MODE;
	int ret = 1;

	if (flash->chip->feature_bits & FEATURE_4BA_ENTER)
		ret = spi_send_command(flash, sizeof(cmd), 0, &cmd, NULL);
	else if (flash->chip->feature_bits & FEATURE_4BA_ENTER_WREN)
		ret = spi_simple_write_cmd(flash, cmd, 0);
	else if (flash->chip->feature_bits & FEATURE_4BA_ENTER_EAR7)
		ret = spi_set_extended_address(flash, enter ? 0x80 : 0x00);

	if (!ret)
		flash->in_4ba_mode = enter;
	return ret;
}

int spi_enter_4ba(struct flashctx *const flash)
{
	return spi_enter_exit_4ba(flash, true);
}

int spi_exit_4ba(struct flashctx *flash)
{
	return spi_enter_exit_4ba(flash, false);
}