diff options
author | Matthew Wilcox <matthew@wil.cx> | 2005-12-15 16:22:01 -0500 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-12-15 18:41:13 -0800 |
commit | 410ca5c7c6ed08bda165e8137bff26c3fbee5a1b (patch) | |
tree | 079d028ecb7ea645f0948e3a90a919c7c4f35eee | |
parent | 7b16318dea8d9840dac567a2ae8c50ecdea36aea (diff) | |
download | linux-stable-410ca5c7c6ed08bda165e8137bff26c3fbee5a1b.tar.gz linux-stable-410ca5c7c6ed08bda165e8137bff26c3fbee5a1b.tar.bz2 linux-stable-410ca5c7c6ed08bda165e8137bff26c3fbee5a1b.zip |
[SCSI] Move scsi_print_msg to SPI class
scsi_print_msg() is an SPI-specific concept. This patch moves it from
constants.c to scsi_transport_spi.c and updates the Kconfig to link in
the SPI class for the drivers which use scsi_print_msg().
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-rw-r--r-- | drivers/scsi/Kconfig | 13 | ||||
-rw-r--r-- | drivers/scsi/arm/Kconfig | 1 | ||||
-rw-r--r-- | drivers/scsi/constants.c | 108 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_spi.c | 109 |
4 files changed, 123 insertions, 108 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 20dd85a77813..4c42065dea88 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -336,6 +336,7 @@ config SCSI_ACARD config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT + select SCSI_SPI_ATTRS ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI + select SCSI_SPI_ATTRS help This is support for Domex DMX3191D SCSI Host Adapters. @@ -632,6 +634,7 @@ config SCSI_DMX3191D config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -752,6 +755,7 @@ config SCSI_GDTH config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using PIO. Most boards such as the Trantor T130 fit this @@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380 config SCSI_GENERIC_NCR5380_MMIO tristate "Generic NCR5380/53c400 SCSI MMIO support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is a driver for the old NCR 53c80 series of SCSI controllers on boards using memory mapped I/O. @@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.10 of the SCSI-HOWTO, available from @@ -1423,6 +1429,7 @@ config SCSI_DC390T config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI + select SCSI_SPI_ATTRS ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1681,6 +1688,7 @@ config OKTAGON_SCSI config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI && BROKEN + select SCSI_SPI_ATTRS ---help--- If you have an Atari with built-in NCR5380 SCSI controller (TT, Falcon, ...) say Y to get it supported. Of course also, if you have @@ -1722,6 +1730,7 @@ config TT_DMA_EMUL config MAC_SCSI bool "Macintosh NCR5380 SCSI" depends on MAC && SCSI=y + select SCSI_SPI_ATTRS help This is the NCR 5380 SCSI controller included on most of the 68030 based Macintoshes. If you have one of these say Y and read the @@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" depends on MVME147 && SCSI=y + select SCSI_SPI_ATTRS help Support for the on-board SCSI controller on the Motorola MVME147 single-board computer. @@ -1750,6 +1760,7 @@ config MVME147_SCSI config MVME16x_SCSI bool "NCR53C710 SCSI driver for MVME16x" depends on MVME16x && SCSI && BROKEN + select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1758,6 +1769,7 @@ config MVME16x_SCSI config BVME6000_SCSI bool "NCR53C710 SCSI driver for BVME6000" depends on BVME6000 && SCSI && BROKEN + select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards @@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI && BROKEN + select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 SCSI controller found in the Sun 3/50 and 3/60, as well as for diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 13f23043c8a3..06d7601cdf56 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -4,6 +4,7 @@ config SCSI_ACORNSCSI_3 tristate "Acorn SCSI card (aka30) support" depends on ARCH_ACORN && SCSI && BROKEN + select SCSI_SPI_ATTRS help This enables support for the Acorn SCSI card (aka30). If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c index a972c1e89e36..30a335349cee 100644 --- a/drivers/scsi/constants.c +++ b/drivers/scsi/constants.c @@ -1278,114 +1278,6 @@ void scsi_print_req_sense(const char *devclass, struct scsi_request *sreq) } EXPORT_SYMBOL(scsi_print_req_sense); -#ifdef CONFIG_SCSI_CONSTANTS -static const char * const one_byte_msgs[] = { -/* 0x00 */ "Command Complete", NULL, "Save Pointers", -/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", -/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", -/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag", -/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", -/* 0x0f */ "Initiate Recovery", "Release Recovery" -}; -#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) - -static const char * const two_byte_msgs[] = { -/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" -/* 0x23 */ "Ignore Wide Residue" -}; -#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) - -static const char * const extended_msgs[] = { -/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", -/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" -}; -#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) - - -int scsi_print_msg (const unsigned char *msg) -{ - int len = 0, i; - if (msg[0] == EXTENDED_MESSAGE) { - len = 3 + msg[1]; - if (msg[2] < NO_EXTENDED_MSGS) - printk ("%s ", extended_msgs[msg[2]]); - else - printk ("Extended Message, reserved code (0x%02x) ", - (int) msg[2]); - switch (msg[2]) { - case EXTENDED_MODIFY_DATA_POINTER: - printk("pointer = %d", (int) (msg[3] << 24) | - (msg[4] << 16) | (msg[5] << 8) | msg[6]); - break; - case EXTENDED_SDTR: - printk("period = %d ns, offset = %d", - (int) msg[3] * 4, (int) msg[4]); - break; - case EXTENDED_WDTR: - printk("width = 2^%d bytes", msg[3]); - break; - default: - for (i = 2; i < len; ++i) - printk("%02x ", msg[i]); - } - /* Identify */ - } else if (msg[0] & 0x80) { - printk("Identify disconnect %sallowed %s %d ", - (msg[0] & 0x40) ? "" : "not ", - (msg[0] & 0x20) ? "target routine" : "lun", - msg[0] & 0x7); - len = 1; - /* Normal One byte */ - } else if (msg[0] < 0x1f) { - if (msg[0] < NO_ONE_BYTE_MSGS) - printk(one_byte_msgs[msg[0]]); - else - printk("reserved (%02x) ", msg[0]); - len = 1; - /* Two byte */ - } else if (msg[0] <= 0x2f) { - if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) - printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], - msg[1]); - else - printk("reserved two byte (%02x %02x) ", - msg[0], msg[1]); - len = 2; - } else - printk("reserved"); - return len; -} -EXPORT_SYMBOL(scsi_print_msg); - -#else /* ifndef CONFIG_SCSI_CONSTANTS */ - -int scsi_print_msg (const unsigned char *msg) -{ - int len = 0, i; - - if (msg[0] == EXTENDED_MESSAGE) { - len = 3 + msg[1]; - for (i = 0; i < len; ++i) - printk("%02x ", msg[i]); - /* Identify */ - } else if (msg[0] & 0x80) { - printk("%02x ", msg[0]); - len = 1; - /* Normal One byte */ - } else if (msg[0] < 0x1f) { - printk("%02x ", msg[0]); - len = 1; - /* Two byte */ - } else if (msg[0] <= 0x2f) { - printk("%02x %02x", msg[0], msg[1]); - len = 2; - } else - printk("%02x ", msg[0]); - return len; -} -EXPORT_SYMBOL(scsi_print_msg); -#endif /* ! CONFIG_SCSI_CONSTANTS */ - void scsi_print_command(struct scsi_cmnd *cmd) { /* Assume appended output (i.e. not at start of line) */ diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 4002a98ab16f..00a73fc23fcc 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -18,6 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/config.h> #include <linux/ctype.h> #include <linux/init.h> #include <linux/module.h> @@ -1047,6 +1048,114 @@ void spi_display_xfer_agreement(struct scsi_target *starget) } EXPORT_SYMBOL(spi_display_xfer_agreement); +#ifdef CONFIG_SCSI_CONSTANTS +static const char * const one_byte_msgs[] = { +/* 0x00 */ "Command Complete", NULL, "Save Pointers", +/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error", +/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error", +/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag", +/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue", +/* 0x0f */ "Initiate Recovery", "Release Recovery" +}; +#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *)) + +static const char * const two_byte_msgs[] = { +/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag" +/* 0x23 */ "Ignore Wide Residue" +}; +#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) + +static const char * const extended_msgs[] = { +/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request", +/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request" +}; +#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *)) + + +int scsi_print_msg (const unsigned char *msg) +{ + int len = 0, i; + if (msg[0] == EXTENDED_MESSAGE) { + len = 3 + msg[1]; + if (msg[2] < NO_EXTENDED_MSGS) + printk ("%s ", extended_msgs[msg[2]]); + else + printk ("Extended Message, reserved code (0x%02x) ", + (int) msg[2]); + switch (msg[2]) { + case EXTENDED_MODIFY_DATA_POINTER: + printk("pointer = %d", (int) (msg[3] << 24) | + (msg[4] << 16) | (msg[5] << 8) | msg[6]); + break; + case EXTENDED_SDTR: + printk("period = %d ns, offset = %d", + (int) msg[3] * 4, (int) msg[4]); + break; + case EXTENDED_WDTR: + printk("width = 2^%d bytes", msg[3]); + break; + default: + for (i = 2; i < len; ++i) + printk("%02x ", msg[i]); + } + /* Identify */ + } else if (msg[0] & 0x80) { + printk("Identify disconnect %sallowed %s %d ", + (msg[0] & 0x40) ? "" : "not ", + (msg[0] & 0x20) ? "target routine" : "lun", + msg[0] & 0x7); + len = 1; + /* Normal One byte */ + } else if (msg[0] < 0x1f) { + if (msg[0] < NO_ONE_BYTE_MSGS) + printk(one_byte_msgs[msg[0]]); + else + printk("reserved (%02x) ", msg[0]); + len = 1; + /* Two byte */ + } else if (msg[0] <= 0x2f) { + if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS) + printk("%s %02x ", two_byte_msgs[msg[0] - 0x20], + msg[1]); + else + printk("reserved two byte (%02x %02x) ", + msg[0], msg[1]); + len = 2; + } else + printk("reserved"); + return len; +} +EXPORT_SYMBOL(scsi_print_msg); + +#else /* ifndef CONFIG_SCSI_CONSTANTS */ + +int scsi_print_msg (const unsigned char *msg) +{ + int len = 0, i; + + if (msg[0] == EXTENDED_MESSAGE) { + len = 3 + msg[1]; + for (i = 0; i < len; ++i) + printk("%02x ", msg[i]); + /* Identify */ + } else if (msg[0] & 0x80) { + printk("%02x ", msg[0]); + len = 1; + /* Normal One byte */ + } else if (msg[0] < 0x1f) { + printk("%02x ", msg[0]); + len = 1; + /* Two byte */ + } else if (msg[0] <= 0x2f) { + printk("%02x %02x", msg[0], msg[1]); + len = 2; + } else + printk("%02x ", msg[0]); + return len; +} +EXPORT_SYMBOL(scsi_print_msg); +#endif /* ! CONFIG_SCSI_CONSTANTS */ + #define SETUP_ATTRIBUTE(field) \ i->private_attrs[count] = class_device_attr_##field; \ if (!i->f->set_##field) { \ |