platform/x86: drop deprecated asus_acpi driver

asus_acpi only support old models, it has been deprecated since
2009 in favor of asus-laptop, it's not built by any (sane) distro,
so it is time to say good bye.

Thanks to Julien Lerouge and Karol Kozimor for the work they have
done on it, I would never have wrote asus-laptop and other asus
related drivers without asus_acpi.

Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

5 files changed, 6 insertions, 1555 deletions

diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 803e51f6768b..a1e04d679289 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -45,7 +45,7 @@ Status
 Usage
 -----
 
-  Try "modprobe asus_acpi". Check your dmesg (simply type dmesg). You should
+  Try "modprobe asus-laptop". Check your dmesg (simply type dmesg). You should
   see some lines like this :
 
       Asus Laptop Extras version 0.42
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index f3f0fe7e255a..45d8097ef4cf 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -23,7 +23,7 @@
  * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
  * are available, video.ko should be used to handle the device.
  *
- * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
+ * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
  * sony_acpi,... can take care about backlight brightness.
  *
  * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 912ffef0f148..0b5519cda194 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -54,7 +54,6 @@ config ACERHDF
 config ASUS_LAPTOP
 	tristate "Asus Laptop Extras"
 	depends on ACPI
-	depends on !ACPI_ASUS
 	select LEDS_CLASS
 	select NEW_LEDS
 	select BACKLIGHT_CLASS_DEVICE
@@ -460,10 +459,9 @@ config INTEL_MENLOW
 	  If unsure, say N.
 
 config EEEPC_LAPTOP
-	tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
+	tristate "Eee PC Hotkey Driver"
 	depends on ACPI
 	depends on INPUT
-	depends on EXPERIMENTAL
 	depends on RFKILL || RFKILL = n
 	depends on HOTPLUG_PCI
 	select BACKLIGHT_CLASS_DEVICE
@@ -482,11 +480,10 @@ config EEEPC_LAPTOP
 	  doesn't work on your Eee PC, try eeepc-wmi instead.
 
 config ASUS_WMI
-	tristate "ASUS WMI Driver (EXPERIMENTAL)"
+	tristate "ASUS WMI Driver"
 	depends on ACPI_WMI
 	depends on INPUT
 	depends on HWMON
-	depends on EXPERIMENTAL
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on RFKILL || RFKILL = n
 	depends on HOTPLUG_PCI
@@ -501,7 +498,7 @@ config ASUS_WMI
 	  be called asus-wmi.
 
 config ASUS_NB_WMI
-	tristate "Asus Notebook WMI Driver (EXPERIMENTAL)"
+	tristate "Asus Notebook WMI Driver"
 	depends on ASUS_WMI
 	---help---
 	  This is a driver for newer Asus notebooks. It adds extra features
@@ -514,7 +511,7 @@ config ASUS_NB_WMI
 	  here.
 
 config EEEPC_WMI
-	tristate "Eee PC WMI Driver (EXPERIMENTAL)"
+	tristate "Eee PC WMI Driver"
 	depends on ASUS_WMI
 	---help---
 	  This is a driver for newer Eee PC laptops. It adds extra features
@@ -559,38 +556,6 @@ config MSI_WMI
 	 To compile this driver as a module, choose M here: the module will
 	 be called msi-wmi.
 
-config ACPI_ASUS
-	tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
-	depends on ACPI
-	select BACKLIGHT_CLASS_DEVICE
-	---help---
-	  This driver provides support for extra features of ACPI-compatible
-	  ASUS laptops. As some of Medion laptops are made by ASUS, it may also
-	  support some Medion laptops (such as 9675 for example).  It makes all
-	  the extra buttons generate standard ACPI events that go through
-	  /proc/acpi/events, and (on some models) adds support for changing the
-	  display brightness and output, switching the LCD backlight on and off,
-	  and most importantly, allows you to blink those fancy LEDs intended
-	  for reporting mail and wireless status.
-
-	  Note: display switching code is currently considered EXPERIMENTAL,
-	  toying with these values may even lock your machine.
-
-	  All settings are changed via /proc/acpi/asus directory entries. Owner
-	  and group for these entries can be set with asus_uid and asus_gid
-	  parameters.
-
-	  More information and a userspace daemon for handling the extra buttons
-	  at <http://acpi4asus.sf.net>.
-
-	  If you have an ACPI-compatible ASUS laptop, say Y or M here. This
-	  driver is still under development, so if your laptop is unsupported or
-	  something works not quite as expected, please use the mailing list
-	  available on the above page (acpi4asus-user@lists.sourceforge.net).
-
-	  NOTE: This driver is deprecated and will probably be removed soon,
-	  use asus-laptop instead.
-
 config TOPSTAR_LAPTOP
 	tristate "Topstar Laptop Extras"
 	depends on ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index d328f21e9fdd..3c07f8bfd42c 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PANASONIC_LAPTOP)	+= panasonic-laptop.o
 obj-$(CONFIG_INTEL_MENLOW)	+= intel_menlow.o
 obj-$(CONFIG_ACPI_WMI)		+= wmi.o
 obj-$(CONFIG_MSI_WMI)		+= msi-wmi.o
-obj-$(CONFIG_ACPI_ASUS)		+= asus_acpi.o
 obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)	+= toshiba_bluetooth.o
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
deleted file mode 100644
index 6f966d6c062b..000000000000
--- a/drivers/platform/x86/asus_acpi.c
+++ /dev/null
@@ -1,1513 +0,0 @@
-/*
- *  asus_acpi.c - Asus Laptop ACPI Extras
- *
- *
- *  Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- *  The development page for this driver is located at
- *  http://sourceforge.net/projects/acpi4asus/
- *
- *  Credits:
- *  Pontus Fuchs   - Helper functions, cleanup
- *  Johann Wiesner - Small compile fixes
- *  John Belmonte  - ACPI code for Toshiba laptop was a good starting point.
- *  �ic Burghard  - LED display support for W1N
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/backlight.h>
-#include <acpi/acpi_drivers.h>
-#include <acpi/acpi_bus.h>
-#include <asm/uaccess.h>
-
-#define ASUS_ACPI_VERSION "0.30"
-
-#define PROC_ASUS       "asus"	/* The directory */
-#define PROC_MLED       "mled"
-#define PROC_WLED       "wled"
-#define PROC_TLED       "tled"
-#define PROC_BT         "bluetooth"
-#define PROC_LEDD       "ledd"
-#define PROC_INFO       "info"
-#define PROC_LCD        "lcd"
-#define PROC_BRN        "brn"
-#define PROC_DISP       "disp"
-
-#define ACPI_HOTK_NAME          "Asus Laptop ACPI Extras Driver"
-#define ACPI_HOTK_CLASS         "hotkey"
-#define ACPI_HOTK_DEVICE_NAME   "Hotkey"
-
-/*
- * Some events we use, same for all Asus
- */
-#define BR_UP       0x10
-#define BR_DOWN     0x20
-
-/*
- * Flags for hotk status
- */
-#define MLED_ON     0x01	/* Mail LED */
-#define WLED_ON     0x02	/* Wireless LED */
-#define TLED_ON     0x04	/* Touchpad LED */
-#define BT_ON       0x08	/* Internal Bluetooth */
-
-MODULE_AUTHOR("Julien Lerouge, Karol Kozimor");
-MODULE_DESCRIPTION(ACPI_HOTK_NAME);
-MODULE_LICENSE("GPL");
-
-static uid_t asus_uid;
-static gid_t asus_gid;
-module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
-module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
-
-/* For each model, all features implemented,
- * those marked with R are relative to HOTK, A for absolute */
-struct model_data {
-	char *name;		/* name of the laptop________________A */
-	char *mt_mled;		/* method to handle mled_____________R */
-	char *mled_status;	/* node to handle mled reading_______A */
-	char *mt_wled;		/* method to handle wled_____________R */
-	char *wled_status;	/* node to handle wled reading_______A */
-	char *mt_tled;		/* method to handle tled_____________R */
-	char *tled_status;	/* node to handle tled reading_______A */
-	char *mt_ledd;		/* method to handle LED display______R */
-	char *mt_bt_switch;	/* method to switch Bluetooth on/off_R */
-	char *bt_status;	/* no model currently supports this__? */
-	char *mt_lcd_switch;	/* method to turn LCD on/off_________A */
-	char *lcd_status;	/* node to read LCD panel state______A */
-	char *brightness_up;	/* method to set brightness up_______A */
-	char *brightness_down;	/* method to set brightness down ____A */
-	char *brightness_set;	/* method to set absolute brightness_R */
-	char *brightness_get;	/* method to get absolute brightness_R */
-	char *brightness_status;/* node to get brightness____________A */
-	char *display_set;	/* method to set video output________R */
-	char *display_get;	/* method to get video output________R */
-};
-
-/*
- * This is the main structure, we can use it to store anything interesting
- * about the hotk device
- */
-struct asus_hotk {
-	struct acpi_device *device;	/* the device we are in */
-	acpi_handle handle;		/* the handle of the hotk device */
-	char status;			/* status of the hotk, for LEDs */
-	u32 ledd_status;		/* status of the LED display */
-	struct model_data *methods;	/* methods available on the laptop */
-	u8 brightness;			/* brightness level */
-	enum {
-		A1x = 0,	/* A1340D, A1300F */
-		A2x,		/* A2500H */
-		A4G,		/* A4700G */
-		D1x,		/* D1 */
-		L2D,		/* L2000D */
-		L3C,		/* L3800C */
-		L3D,		/* L3400D */
-		L3H,		/* L3H, L2000E, L5D */
-		L4R,		/* L4500R */
-		L5x,		/* L5800C */
-		L8L,		/* L8400L */
-		M1A,		/* M1300A */
-		M2E,		/* M2400E, L4400L */
-		M6N,		/* M6800N, W3400N */
-		M6R,		/* M6700R, A3000G */
-		P30,		/* Samsung P30 */
-		S1x,		/* S1300A, but also L1400B and M2400A (L84F) */
-		S2x,		/* S200 (J1 reported), Victor MP-XP7210 */
-		W1N,		/* W1000N */
-		W5A,		/* W5A */
-		W3V,            /* W3030V */
-		xxN,		/* M2400N, M3700N, M5200N, M6800N,
-							 S1300N, S5200N*/
-		A4S,            /* Z81sp */
-		F3Sa,		/* (Centrino) */
-		R1F,
-		END_MODEL
-	} model;		/* Models currently supported */
-	u16 event_count[128];	/* Count for each event TODO make this better */
-};
-
-/* Here we go */
-#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0."
-#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0."
-#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0."
-#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0."
-#define S1x_PREFIX "\\_SB.PCI0.PX40."
-#define S2x_PREFIX A1x_PREFIX
-#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0."
-
-static struct model_data model_conf[END_MODEL] = {
-	/*
-	 * TODO I have seen a SWBX and AIBX method on some models, like L1400B,
-	 * it seems to be a kind of switch, but what for ?
-	 */
-
-	{
-	 .name = "A1x",
-	 .mt_mled = "MLED",
-	 .mled_status = "\\MAIL",
-	 .mt_lcd_switch = A1x_PREFIX "_Q10",
-	 .lcd_status = "\\BKLI",
-	 .brightness_up = A1x_PREFIX "_Q0E",
-	 .brightness_down = A1x_PREFIX "_Q0F"},
-
-	{
-	 .name = "A2x",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .wled_status = "\\SG66",
-	 .mt_lcd_switch = "\\Q10",
-	 .lcd_status = "\\BAOF",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "A4G",
-	 .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\ADVG"},
-
-	{
-	 .name = "D1x",
-	 .mt_mled = "MLED",
-	 .mt_lcd_switch = "\\Q0D",
-	 .lcd_status = "\\GP11",
-	 .brightness_up = "\\Q0C",
-	 .brightness_down = "\\Q0B",
-	 .brightness_status = "\\BLVL",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "L2D",
-	 .mt_mled = "MLED",
-	 .mled_status = "\\SGP6",
-	 .mt_wled = "WLED",
-	 .wled_status = "\\RCP3",
-	 .mt_lcd_switch = "\\Q10",
-	 .lcd_status = "\\SGP0",
-	 .brightness_up = "\\Q0E",
-	 .brightness_down = "\\Q0F",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "L3C",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = L3C_PREFIX "_Q10",
-	 .lcd_status = "\\GL32",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"},
-
-	{
-	 .name = "L3D",
-	 .mt_mled = "MLED",
-	 .mled_status = "\\MALD",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = "\\Q10",
-	 .lcd_status = "\\BKLG",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "L3H",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = "EHK",
-	 .lcd_status = "\\_SB.PCI0.PM.PBC",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "L4R",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .wled_status = "\\_SB.PCI0.SBRG.SG13",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\_SB.PCI0.SBSM.SEO4",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
-
-	{
-	 .name = "L5x",
-	 .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
-	 .mt_tled = "TLED",
-	 .mt_lcd_switch = "\\Q0D",
-	 .lcd_status = "\\BAOF",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "L8L"
-/* No features, but at least support the hotkeys */
-	 },
-
-	{
-	 .name = "M1A",
-	 .mt_mled = "MLED",
-	 .mt_lcd_switch = M1A_PREFIX "Q10",
-	 .lcd_status = "\\PNOF",
-	 .brightness_up = M1A_PREFIX "Q0E",
-	 .brightness_down = M1A_PREFIX "Q0F",
-	 .brightness_status = "\\BRIT",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "M2E",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = "\\Q10",
-	 .lcd_status = "\\GP06",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-	{
-	 .name = "M6N",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .wled_status = "\\_SB.PCI0.SBRG.SG13",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\_SB.BKLT",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\SSTE"},
-
-	{
-	 .name = "M6R",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\_SB.PCI0.SBSM.SEO4",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
-
-	{
-	 .name = "P30",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = P30_PREFIX "_Q0E",
-	 .lcd_status = "\\BKLT",
-	 .brightness_up = P30_PREFIX "_Q68",
-	 .brightness_down = P30_PREFIX "_Q69",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\DNXT"},
-
-	{
-	 .name = "S1x",
-	 .mt_mled = "MLED",
-	 .mled_status = "\\EMLE",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = S1x_PREFIX "Q10",
-	 .lcd_status = "\\PNOF",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV"},
-
-	{
-	 .name = "S2x",
-	 .mt_mled = "MLED",
-	 .mled_status = "\\MAIL",
-	 .mt_lcd_switch = S2x_PREFIX "_Q10",
-	 .lcd_status = "\\BKLI",
-	 .brightness_up = S2x_PREFIX "_Q0B",
-	 .brightness_down = S2x_PREFIX "_Q0A"},
-
-	{
-	 .name = "W1N",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_ledd = "SLCM",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\BKLT",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\ADVG"},
-
-	{
-	 .name = "W5A",
-	 .mt_bt_switch = "BLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\ADVG"},
-
-	{
-	 .name = "W3V",
-	 .mt_mled = "MLED",
-	 .mt_wled = "WLED",
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\BKLT",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	 .display_get = "\\INFB"},
-
-       {
-	 .name = "xxN",
-	 .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
-	 .mt_lcd_switch = xxN_PREFIX "_Q10",
-	 .lcd_status = "\\BKLT",
-	 .brightness_set = "SPLV",
-	 .brightness_get = "GPLV",
-	 .display_set = "SDSP",
-	.display_get = "\\ADVG"},
-
-	{
-		.name              = "A4S",
-		.brightness_set    = "SPLV",
-		.brightness_get    = "GPLV",
-		.mt_bt_switch      = "BLED",
-		.mt_wled           = "WLED"
-	},
-
-	{
-		.name		= "F3Sa",
-		.mt_bt_switch	= "BLED",
-		.mt_wled	= "WLED",
-		.mt_mled	= "MLED",
-		.brightness_get	= "GPLV",
-		.brightness_set	= "SPLV",
-		.mt_lcd_switch	= "\\_SB.PCI0.SBRG.EC0._Q10",
-		.lcd_status	= "\\_SB.PCI0.SBRG.EC0.RPIN",
-		.display_get	= "\\ADVG",
-		.display_set	= "SDSP",
-	},
-	{
-		.name = "R1F",
-		.mt_bt_switch = "BLED",
-		.mt_mled = "MLED",
-		.mt_wled = "WLED",
-		.mt_lcd_switch = "\\Q10",
-		.lcd_status = "\\GP06",
-		.brightness_set = "SPLV",
-		.brightness_get = "GPLV",
-		.display_set = "SDSP",
-		.display_get = "\\INFB"
-	}
-};
-
-/* procdir we use */
-static struct proc_dir_entry *asus_proc_dir;
-
-static struct backlight_device *asus_backlight_device;
-
-/*
- * This header is made available to allow proper configuration given model,
- * revision number , ... this info cannot go in struct asus_hotk because it is
- * available before the hotk
- */
-static struct acpi_table_header *asus_info;
-
-/* The actual device the driver binds to */
-static struct asus_hotk *hotk;
-
-/*
- * The hotkey driver and autoloading declaration
- */
-static int asus_hotk_add(struct acpi_device *device);
-static int asus_hotk_remove(struct acpi_device *device, int type);
-static void asus_hotk_notify(struct acpi_device *device, u32 event);
-
-static const struct acpi_device_id asus_device_ids[] = {
-	{"ATK0100", 0},
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, asus_device_ids);
-
-static struct acpi_driver asus_hotk_driver = {
-	.name = "asus_acpi",
-	.class = ACPI_HOTK_CLASS,
-	.owner = THIS_MODULE,
-	.ids = asus_device_ids,
-	.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
-	.ops = {
-		.add = asus_hotk_add,
-		.remove = asus_hotk_remove,
-		.notify = asus_hotk_notify,
-		},
-};
-
-/*
- * This function evaluates an ACPI method, given an int as parameter, the
- * method is searched within the scope of the handle, can be NULL. The output
- * of the method is written is output, which can also be NULL
- *
- * returns 1 if write is successful, 0 else.
- */
-static int write_acpi_int(acpi_handle handle, const char *method, int val,
-			  struct acpi_buffer *output)
-{
-	struct acpi_object_list params;	/* list of input parameters (int) */
-	union acpi_object in_obj;	/* the only param we use */
-	acpi_status status;
-
-	params.count = 1;
-	params.pointer = &in_obj;
-	in_obj.type = ACPI_TYPE_INTEGER;
-	in_obj.integer.value = val;
-
-	status = acpi_evaluate_object(handle, (char *)method, &params, output);
-	return (status == AE_OK);
-}
-
-static int read_acpi_int(acpi_handle handle, const char *method, int *val)
-{
-	struct acpi_buffer output;
-	union acpi_object out_obj;
-	acpi_status status;
-
-	output.length = sizeof(out_obj);
-	output.pointer = &out_obj;
-
-	status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
-	*val = out_obj.integer.value;
-	return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
-}
-
-static int asus_info_proc_show(struct seq_file *m, void *v)
-{
-	int temp;
-
-	seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
-	seq_printf(m, "Model reference    : %s\n", hotk->methods->name);
-	/*
-	 * The SFUN method probably allows the original driver to get the list
-	 * of features supported by a given model. For now, 0x0100 or 0x0800
-	 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
-	 * The significance of others is yet to be found.
-	 */
-	if (read_acpi_int(hotk->handle, "SFUN", &temp))
-		seq_printf(m, "SFUN value         : 0x%04x\n", temp);
-	/*
-	 * Another value for userspace: the ASYM method returns 0x02 for
-	 * battery low and 0x04 for battery critical, its readings tend to be
-	 * more accurate than those provided by _BST.
-	 * Note: since not all the laptops provide this method, errors are
-	 * silently ignored.
-	 */
-	if (read_acpi_int(hotk->handle, "ASYM", &temp))
-		seq_printf(m, "ASYM value         : 0x%04x\n", temp);
-	if (asus_info) {
-		seq_printf(m, "DSDT length        : %d\n", asus_info->length);
-		seq_printf(m, "DSDT checksum      : %d\n", asus_info->checksum);
-		seq_printf(m, "DSDT revision      : %d\n", asus_info->revision);
-		seq_printf(m, "OEM id             : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id);
-		seq_printf(m, "OEM table id       : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id);
-		seq_printf(m, "OEM revision       : 0x%x\n", asus_info->oem_revision);
-		seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id);
-		seq_printf(m, "ASL comp revision  : 0x%x\n", asus_info->asl_compiler_revision);
-	}
-
-	return 0;
-}
-
-static int asus_info_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, asus_info_proc_show, NULL);
-}
-
-static const struct file_operations asus_info_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= asus_info_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * /proc handlers
- * We write our info in page, we begin at offset off and cannot write more
- * than count bytes. We set eof to 1 if we handle those 2 values. We return the
- * number of bytes written in page
- */
-
-/* Generic LED functions */
-static int read_led(const char *ledname, int ledmask)
-{
-	if (ledname) {
-		int led_status;
-
-		if (read_acpi_int(NULL, ledname, &led_status))
-			return led_status;
-		else
-			pr_warn("Error reading LED status\n");
-	}
-	return (hotk->status & ledmask) ? 1 : 0;
-}
-
-static int parse_arg(const char __user *buf, unsigned long count, int *val)
-{
-	char s[32];
-	if (!count)
-		return 0;
-	if (count > 31)
-		return -EINVAL;
-	if (copy_from_user(s, buf, count))
-		return -EFAULT;
-	s[count] = 0;
-	if (sscanf(s, "%i", val) != 1)
-		return -EINVAL;
-	return count;
-}
-
-/* FIXME: kill extraneous args so it can be called independently */
-static int
-write_led(const char __user *buffer, unsigned long count,
-	  char *ledname, int ledmask, int invert)
-{
-	int rv, value;
-	int led_out = 0;
-
-	rv = parse_arg(buffer, count, &value);
-	if (rv > 0)
-		led_out = value ? 1 : 0;
-
-	hotk->status =
-	    (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
-
-	if (invert)		/* invert target value */
-		led_out = !led_out;
-
-	if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
-		pr_warn("LED (%s) write failed\n", ledname);
-
-	return rv;
-}
-
-/*
- * Proc handlers for MLED
- */
-static int mled_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON));
-	return 0;
-}
-
-static int mled_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mled_proc_show, NULL);
-}
-
-static ssize_t mled_proc_write(struct file *file, const char __user *buffer,
-		size_t count, loff_t *pos)
-{
-	return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
-}
-
-static const struct file_operations mled_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= mled_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= mled_proc_write,
-};
-
-/*
- * Proc handlers for LED display
- */
-static int ledd_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "0x%08x\n", hotk->ledd_status);
-	return 0;
-}
-
-static int ledd_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ledd_proc_show, NULL);
-}
-
-static ssize_t ledd_proc_write(struct file *file, const char __user *buffer,
-		size_t count, loff_t *pos)
-{
-	int rv, value;
-
-	rv = parse_arg(buffer, count, &value);
-	if (rv > 0) {
-		if (!write_acpi_int
-		    (hotk->handle, hotk->methods->mt_ledd, value, NULL))
-			pr_warn("LED display write failed\n");
-		else
-			hotk->ledd_status = (u32) value;
-	}
-	return rv;
-}
-
-static const struct file_operations ledd_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ledd_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= ledd_proc_write,
-};
-
-/*
- * Proc handlers for WLED
- */
-static int wled_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON));
-	return 0;
-}
-
-static int wled_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, wled_proc_show, NULL);
-}
-
-static ssize_t wled_proc_write(struct file *file, const char __user *buffer,
-		size_t count, loff_t *pos)
-{
-	return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
-}
-
-static const struct file_operations wled_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= wled_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= wled_proc_write,
-};
-
-/*
- * Proc handlers for Bluetooth
- */
-static int bluetooth_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
-	return 0;
-}
-
-static int bluetooth_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, bluetooth_proc_show, NULL);
-}
-
-static ssize_t bluetooth_proc_write(struct file *file,
-		const char __user *buffer, size_t count, loff_t *pos)
-{
-	/* Note: mt_bt_switch controls both internal Bluetooth adapter's
-	   presence and its LED */
-	return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
-}
-
-static const struct file_operations bluetooth_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= bluetooth_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= bluetooth_proc_write,
-};
-
-/*
- * Proc handlers for TLED
- */
-static int tled_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON));
-	return 0;
-}
-
-static int tled_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, tled_proc_show, NULL);
-}
-
-static ssize_t tled_proc_write(struct file *file, const char __user *buffer,
-		size_t count, loff_t *pos)
-{
-	return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
-}
-
-static const struct file_operations tled_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= tled_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= tled_proc_write,
-};
-
-static int get_lcd_state(void)
-{
-	int lcd = 0;
-
-	if (hotk->model == L3H) {
-		/* L3H and the like have to be handled differently */
-		acpi_status status = 0;
-		struct acpi_object_list input;
-		union acpi_object mt_params[2];
-		struct acpi_buffer output;
-		union acpi_object out_obj;
-
-		input.count = 2;
-		input.pointer = mt_params;
-		/* Note: the following values are partly guessed up, but
-		   otherwise they seem to work */
-		mt_params[0].type = ACPI_TYPE_INTEGER;
-		mt_params[0].integer.value = 0x02;
-		mt_params[1].type = ACPI_TYPE_INTEGER;
-		mt_params[1].integer.value = 0x02;
-
-		output.length = sizeof(out_obj);
-		output.pointer = &out_obj;
-
-		status =
-		    acpi_evaluate_object(NULL, hotk->methods->lcd_status,
-					 &input, &output);
-		if (status != AE_OK)
-			return -1;
-		if (out_obj.type == ACPI_TYPE_INTEGER)
-			/* That's what the AML code does */
-			lcd = out_obj.integer.value >> 8;
-	} else if (hotk->model == F3Sa) {
-		unsigned long long tmp;
-		union acpi_object param;
-		struct acpi_object_list input;
-		acpi_status status;
-
-		/* Read pin 11 */
-		param.type = ACPI_TYPE_INTEGER;
-		param.integer.value = 0x11;
-		input.count = 1;
-		input.pointer = &param;
-
-		status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
-						&input, &tmp);
-		if (status != AE_OK)
-			return -1;
-
-		lcd = tmp;
-	} else {
-		/* We don't have to check anything if we are here */
-		if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
-			pr_warn("Error reading LCD status\n");
-
-		if (hotk->model == L2D)
-			lcd = ~lcd;
-	}
-
-	return (lcd & 1);
-}
-
-static int set_lcd_state(int value)
-{
-	int lcd = 0;
-	acpi_status status = 0;
-
-	lcd = value ? 1 : 0;
-	if (lcd != get_lcd_state()) {
-		/* switch */
-		if (hotk->model != L3H) {
-			status =
-			    acpi_evaluate_object(NULL,
-						 hotk->methods->mt_lcd_switch,
-						 NULL, NULL);
-		} else {
-			/* L3H and the like must be handled differently */
-			if (!write_acpi_int
-			    (hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
-			     NULL))
-				status = AE_ERROR;
-			/* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
-			   the exact behaviour is simulated here */
-		}
-		if (ACPI_FAILURE(status))
-			pr_warn("Error switching LCD\n");
-	}
-	return 0;
-
-}
-
-static int lcd_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", get_lcd_state());
-	return 0;
-}
-
-static int lcd_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, lcd_proc_show, NULL);
-}
-
-static ssize_t lcd_proc_write(struct file *file, const char __user *buffer,
-	       size_t count, loff_t *pos)
-{
-	int rv, value;
-
-	rv = parse_arg(buffer, count, &value);
-	if (rv > 0)
-		set_lcd_state(value);
-	return rv;
-}
-
-static const struct file_operations lcd_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= lcd_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= lcd_proc_write,
-};
-
-static int read_brightness(struct backlight_device *bd)
-{
-	int value;
-
-	if (hotk->methods->brightness_get) {	/* SPLV/GPLV laptop */
-		if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
-				   &value))
-			pr_warn("Error reading brightness\n");
-	} else if (hotk->methods->brightness_status) {	/* For D1 for example */
-		if (!read_acpi_int(NULL, hotk->methods->brightness_status,
-				   &value))
-			pr_warn("Error reading brightness\n");
-	} else			/* No GPLV method */
-		value = hotk->brightness;
-	return value;
-}
-
-/*
- * Change the brightness level
- */
-static int set_brightness(int value)
-{
-	acpi_status status = 0;
-	int ret = 0;
-
-	/* SPLV laptop */
-	if (hotk->methods->brightness_set) {
-		if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
-				    value, NULL)) {
-			pr_warn("Error changing brightness\n");
-			ret = -EIO;
-		}
-		goto out;
-	}
-
-	/* No SPLV method if we are here, act as appropriate */
-	value -= read_brightness(NULL);
-	while (value != 0) {
-		status = acpi_evaluate_object(NULL, (value > 0) ?
-					      hotk->methods->brightness_up :
-					      hotk->methods->brightness_down,
-					      NULL, NULL);
-		(value > 0) ? value-- : value++;
-		if (ACPI_FAILURE(status)) {
-			pr_warn("Error changing brightness\n");
-			ret = -EIO;
-		}
-	}
-out:
-	return ret;
-}
-
-static int set_brightness_status(struct backlight_device *bd)
-{
-	return set_brightness(bd->props.brightness);
-}
-
-static int brn_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%d\n", read_brightness(NULL));
-	return 0;
-}
-
-static int brn_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, brn_proc_show, NULL);
-}
-
-static ssize_t brn_proc_write(struct file *file, const char __user *buffer,
-	       size_t count, loff_t *pos)
-{
-	int rv, value;
-
-	rv = parse_arg(buffer, count, &value);
-	if (rv > 0) {
-		value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
-		/* 0 <= value <= 15 */
-		set_brightness(value);
-	}
-	return rv;
-}
-
-static const struct file_operations brn_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= brn_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= brn_proc_write,
-};
-
-static void set_display(int value)
-{
-	/* no sanity check needed for now */
-	if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
-			    value, NULL))
-		pr_warn("Error setting display\n");
-	return;
-}
-
-/*
- * Now, *this* one could be more user-friendly, but so far, no-one has
- * complained. The significance of bits is the same as in proc_write_disp()
- */
-static int disp_proc_show(struct seq_file *m, void *v)
-{
-	int value = 0;
-
-	if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
-		pr_warn("Error reading display status\n");
-	value &= 0x07;	/* needed for some models, shouldn't hurt others */
-	seq_printf(m, "%d\n", value);
-	return 0;
-}
-
-static int disp_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, disp_proc_show, NULL);
-}
-
-/*
- * Experimental support for display switching. As of now: 1 should activate
- * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
- * (bitwise) of these will suffice. I never actually tested 3 displays hooked
- * up simultaneously, so be warned. See the acpi4asus README for more info.
- */
-static ssize_t disp_proc_write(struct file *file, const char __user *buffer,
-		size_t count, loff_t *pos)
-{
-	int rv, value;
-
-	rv = parse_arg(buffer, count, &value);
-	if (rv > 0)
-		set_display(value);
-	return rv;
-}
-
-static const struct file_operations disp_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= disp_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= disp_proc_write,
-};
-
-static int
-asus_proc_add(char *name, const struct file_operations *proc_fops, umode_t mode,
-		     struct acpi_device *device)
-{
-	struct proc_dir_entry *proc;
-
-	proc = proc_create_data(name, mode, acpi_device_dir(device),
-				proc_fops, acpi_driver_data(device));
-	if (!proc) {
-		pr_warn("  Unable to create %s fs entry\n", name);
-		return -1;
-	}
-	proc->uid = asus_uid;
-	proc->gid = asus_gid;
-	return 0;
-}
-
-static int asus_hotk_add_fs(struct acpi_device *device)
-{
-	struct proc_dir_entry *proc;
-	umode_t mode;
-
-	if ((asus_uid == 0) && (asus_gid == 0)) {
-		mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
-	} else {
-		mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
-		pr_warn("  asus_uid and asus_gid parameters are "
-			"deprecated, use chown and chmod instead!\n");
-	}
-
-	acpi_device_dir(device) = asus_proc_dir;
-	if (!acpi_device_dir(device))
-		return -ENODEV;
-
-	proc = proc_create(PROC_INFO, mode, acpi_device_dir(device),
-			   &asus_info_proc_fops);
-	if (proc) {
-		proc->uid = asus_uid;
-		proc->gid = asus_gid;
-	} else {
-		pr_warn("  Unable to create " PROC_INFO " fs entry\n");
-	}
-
-	if (hotk->methods->mt_wled) {
-		asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device);
-	}
-
-	if (hotk->methods->mt_ledd) {
-		asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device);
-	}
-
-	if (hotk->methods->mt_mled) {
-		asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device);
-	}
-
-	if (hotk->methods->mt_tled) {
-		asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device);
-	}
-
-	if (hotk->methods->mt_bt_switch) {
-		asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device);
-	}
-
-	/*
-	 * We need both read node and write method as LCD switch is also
-	 * accessible from the keyboard
-	 */
-	if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
-		asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device);
-	}
-
-	if ((hotk->methods->brightness_up && hotk->methods->brightness_down) ||
-	    (hotk->methods->brightness_get && hotk->methods->brightness_set)) {
-		asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device);
-	}
-
-	if (hotk->methods->display_set) {
-		asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device);
-	}
-
-	return 0;
-}
-
-static int asus_hotk_remove_fs(struct acpi_device *device)
-{
-	if (acpi_device_dir(device)) {
-		remove_proc_entry(PROC_INFO, acpi_device_dir(device));
-		if (hotk->methods->mt_wled)
-			remove_proc_entry(PROC_WLED, acpi_device_dir(device));
-		if (hotk->methods->mt_mled)
-			remove_proc_entry(PROC_MLED, acpi_device_dir(device));
-		if (hotk->methods->mt_tled)
-			remove_proc_entry(PROC_TLED, acpi_device_dir(device));
-		if (hotk->methods->mt_ledd)
-			remove_proc_entry(PROC_LEDD, acpi_device_dir(device));
-		if (hotk->methods->mt_bt_switch)
-			remove_proc_entry(PROC_BT, acpi_device_dir(device));
-		if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status)
-			remove_proc_entry(PROC_LCD, acpi_device_dir(device));
-		if ((hotk->methods->brightness_up
-		     && hotk->methods->brightness_down)
-		    || (hotk->methods->brightness_get
-			&& hotk->methods->brightness_set))
-			remove_proc_entry(PROC_BRN, acpi_device_dir(device));
-		if (hotk->methods->display_set)
-			remove_proc_entry(PROC_DISP, acpi_device_dir(device));
-	}
-	return 0;
-}
-
-static void asus_hotk_notify(struct acpi_device *device, u32 event)
-{
-	/* TODO Find a better way to handle events count. */
-	if (!hotk)
-		return;
-
-	/*
-	 * The BIOS *should* be sending us device events, but apparently
-	 * Asus uses system events instead, so just ignore any device
-	 * events we get.
-	 */
-	if (event > ACPI_MAX_SYS_NOTIFY)
-		return;
-
-	if ((event & ~((u32) BR_UP)) < 16)
-		hotk->brightness = (event & ~((u32) BR_UP));
-	else if ((event & ~((u32) BR_DOWN)) < 16)
-		hotk->brightness = (event & ~((u32) BR_DOWN));
-
-	acpi_bus_generate_proc_event(hotk->device, event,
-				hotk->event_count[event % 128]++);
-
-	return;
-}
-
-/*
- * Match the model string to the list of supported models. Return END_MODEL if
- * no match or model is NULL.
- */
-static int asus_model_match(char *model)
-{
-	if (model == NULL)
-		return END_MODEL;
-
-	if (strncmp(model, "L3D", 3) == 0)
-		return L3D;
-	else if (strncmp(model, "L2E", 3) == 0 ||
-		 strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0)
-		return L3H;
-	else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0)
-		return L3C;
-	else if (strncmp(model, "L8L", 3) == 0)
-		return L8L;
-	else if (strncmp(model, "L4R", 3) == 0)
-		return L4R;
-	else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0)
-		return M6N;
-	else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0)
-		return M6R;
-	else if (strncmp(model, "M2N", 3) == 0 ||
-		 strncmp(model, "M3N", 3) == 0 ||
-		 strncmp(model, "M5N", 3) == 0 ||
-		 strncmp(model, "S1N", 3) == 0 ||
-		 strncmp(model, "S5N", 3) == 0)
-		return xxN;
-	else if (strncmp(model, "M1", 2) == 0)
-		return M1A;
-	else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0)
-		return M2E;
-	else if (strncmp(model, "L2", 2) == 0)
-		return L2D;
-	else if (strncmp(model, "L8", 2) == 0)
-		return S1x;
-	else if (strncmp(model, "D1", 2) == 0)
-		return D1x;
-	else if (strncmp(model, "A1", 2) == 0)
-		return A1x;
-	else if (strncmp(model, "A2", 2) == 0)
-		return A2x;
-	else if (strncmp(model, "J1", 2) == 0)
-		return S2x;
-	else if (strncmp(model, "L5", 2) == 0)
-		return L5x;
-	else if (strncmp(model, "A4G", 3) == 0)
-		return A4G;
-	else if (strncmp(model, "W1N", 3) == 0)
-		return W1N;
-	else if (strncmp(model, "W3V", 3) == 0)
-		return W3V;
-	else if (strncmp(model, "W5A", 3) == 0)
-		return W5A;
-	else if (strncmp(model, "R1F", 3) == 0)
-		return R1F;
-	else if (strncmp(model, "A4S", 3) == 0)
-		return A4S;
-	else if (strncmp(model, "F3Sa", 4) == 0)
-		return F3Sa;
-	else
-		return END_MODEL;
-}
-
-/*
- * This function is used to initialize the hotk with right values. In this
- * method, we can make all the detection we want, and modify the hotk struct
- */
-static int asus_hotk_get_info(void)
-{
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *model = NULL;
-	int bsts_result;
-	char *string = NULL;
-	acpi_status status;
-
-	/*
-	 * Get DSDT headers early enough to allow for differentiating between
-	 * models, but late enough to allow acpi_bus_register_driver() to fail
-	 * before doing anything ACPI-specific. Should we encounter a machine,
-	 * which needs special handling (i.e. its hotkey device has a different
-	 * HID), this bit will be moved. A global variable asus_info contains
-	 * the DSDT header.
-	 */
-	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
-	if (ACPI_FAILURE(status))
-		pr_warn("  Couldn't get the DSDT table header\n");
-
-	/* We have to write 0 on init this far for all ASUS models */
-	if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
-		pr_err("  Hotkey initialization failed\n");
-		return -ENODEV;
-	}
-
-	/* This needs to be called for some laptops to init properly */
-	if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
-		pr_warn("  Error calling BSTS\n");
-	else if (bsts_result)
-		pr_notice("  BSTS called, 0x%02x returned\n", bsts_result);
-
-	/*
-	 * Try to match the object returned by INIT to the specific model.
-	 * Handle every possible object (or the lack of thereof) the DSDT
-	 * writers might throw at us. When in trouble, we pass NULL to
-	 * asus_model_match() and try something completely different.
-	 */
-	if (buffer.pointer) {
-		model = buffer.pointer;
-		switch (model->type) {
-		case ACPI_TYPE_STRING:
-			string = model->string.pointer;
-			break;
-		case ACPI_TYPE_BUFFER:
-			string = model->buffer.pointer;
-			break;
-		default:
-			kfree(model);
-			model = NULL;
-			break;
-		}
-	}
-	hotk->model = asus_model_match(string);
-	if (hotk->model == END_MODEL) {	/* match failed */
-		if (asus_info &&
-		    strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
-			hotk->model = P30;
-			pr_notice("  Samsung P30 detected, supported\n");
-			hotk->methods = &model_conf[hotk->model];
-			kfree(model);
-			return 0;
-		} else {
-			hotk->model = M2E;
-			pr_notice("  unsupported model %s, trying default values\n",
-				  string);
-			pr_notice("  send /proc/acpi/dsdt to the developers\n");
-			kfree(model);
-			return -ENODEV;
-		}
-	}
-	hotk->methods = &model_conf[hotk->model];
-	pr_notice("  %s model detected, supported\n", string);
-
-	/* Sort of per-model blacklist */
-	if (strncmp(string, "L2B", 3) == 0)
-		hotk->methods->lcd_status = NULL;
-	/* L2B is similar enough to L3C to use its settings, with this only
-	   exception */
-	else if (strncmp(string, "A3G", 3) == 0)
-		hotk->methods->lcd_status = "\\BLFG";
-	/* A3G is like M6R */
-	else if (strncmp(string, "S5N", 3) == 0 ||
-		 strncmp(string, "M5N", 3) == 0 ||
-		 strncmp(string, "W3N", 3) == 0)
-		hotk->methods->mt_mled = NULL;
-	/* S5N, M5N and W3N have no MLED */
-	else if (strncmp(string, "L5D", 3) == 0)
-		hotk->methods->mt_wled = NULL;
-	/* L5D's WLED is not controlled by ACPI */
-	else if (strncmp(string, "M2N", 3) == 0 ||
-		 strncmp(string, "W3V", 3) == 0 ||
-		 strncmp(string, "S1N", 3) == 0)
-		hotk->methods->mt_wled = "WLED";
-	/* M2N, S1N and W3V have a usable WLED */
-	else if (asus_info) {
-		if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
-			hotk->methods->mled_status = NULL;
-		/* S1300A reports L84F, but L1400B too, account for that */
-	}
-
-	kfree(model);
-
-	return 0;
-}
-
-static int asus_hotk_check(void)
-{
-	int result = 0;
-
-	result = acpi_bus_get_status(hotk->device);
-	if (result)
-		return result;
-
-	if (hotk->device->status.present) {
-		result = asus_hotk_get_info();
-	} else {
-		pr_err("  Hotkey device not present, aborting\n");
-		return -EINVAL;
-	}
-
-	return result;
-}
-
-static int asus_hotk_found;
-
-static int asus_hotk_add(struct acpi_device *device)
-{
-	acpi_status status = AE_OK;
-	int result;
-
-	pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION);
-
-	hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
-	if (!hotk)
-		return -ENOMEM;
-
-	hotk->handle = device->handle;
-	strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
-	strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
-	device->driver_data = hotk;
-	hotk->device = device;
-
-	result = asus_hotk_check();
-	if (result)
-		goto end;
-
-	result = asus_hotk_add_fs(device);
-	if (result)
-		goto end;
-
-	/* For laptops without GPLV: init the hotk->brightness value */
-	if ((!hotk->methods->brightness_get)
-	    && (!hotk->methods->brightness_status)
-	    && (hotk->methods->brightness_up && hotk->methods->brightness_down)) {
-		status =
-		    acpi_evaluate_object(NULL, hotk->methods->brightness_down,
-					 NULL, NULL);
-		if (ACPI_FAILURE(status))
-			pr_warn("  Error changing brightness\n");
-		else {
-			status =
-			    acpi_evaluate_object(NULL,
-						 hotk->methods->brightness_up,
-						 NULL, NULL);
-			if (ACPI_FAILURE(status))
-				pr_warn("  Strange, error changing brightness\n");
-		}
-	}
-
-	asus_hotk_found = 1;
-
-	/* LED display is off by default */
-	hotk->ledd_status = 0xFFF;
-
-end:
-	if (result)
-		kfree(hotk);
-
-	return result;
-}
-
-static int asus_hotk_remove(struct acpi_device *device, int type)
-{
-	asus_hotk_remove_fs(device);
-
-	kfree(hotk);
-
-	return 0;
-}
-
-static const struct backlight_ops asus_backlight_data = {
-	.get_brightness = read_brightness,
-	.update_status  = set_brightness_status,
-};
-
-static void asus_acpi_exit(void)
-{
-	if (asus_backlight_device)
-		backlight_device_unregister(asus_backlight_device);
-
-	acpi_bus_unregister_driver(&asus_hotk_driver);
-	remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
-	return;
-}
-
-static int __init asus_acpi_init(void)
-{
-	struct backlight_properties props;
-	int result;
-
-	result = acpi_bus_register_driver(&asus_hotk_driver);
-	if (result < 0)
-		return result;
-
-	asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
-	if (!asus_proc_dir) {
-		pr_err("Unable to create /proc entry\n");
-		acpi_bus_unregister_driver(&asus_hotk_driver);
-		return -ENODEV;
-	}
-
-	/*
-	 * This is a bit of a kludge.  We only want this module loaded
-	 * for ASUS systems, but there's currently no way to probe the
-	 * ACPI namespace for ASUS HIDs.  So we just return failure if
-	 * we didn't find one, which will cause the module to be
-	 * unloaded.
-	 */
-	if (!asus_hotk_found) {
-		acpi_bus_unregister_driver(&asus_hotk_driver);
-		remove_proc_entry(PROC_ASUS, acpi_root_dir);
-		return -ENODEV;
-	}
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_PLATFORM;
-	props.max_brightness = 15;
-	asus_backlight_device = backlight_device_register("asus", NULL, NULL,
-							  &asus_backlight_data,
-							  &props);
-	if (IS_ERR(asus_backlight_device)) {
-		pr_err("Could not register asus backlight device\n");
-		asus_backlight_device = NULL;
-		asus_acpi_exit();
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-module_init(asus_acpi_init);
-module_exit(asus_acpi_exit);