x86, apic: Remove support for ia32-based Unisys ES7000

There should no longer be any ia32-based Unisys ES7000 systems out in
the wild, so remove support for it.

We've done our due diligence in reaching out to any contact information
listed for this system and no indication was given that it should be
kept around.

Signed-off-by: David Rientjes <rientjes@google.com>

4 files changed, 2 insertions, 761 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0af5250d914f..c6a864748c38 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -351,7 +351,6 @@ config X86_EXTENDED_PLATFORM
 		SGI 320/540 (Visual Workstation)
 		STA2X11-based (e.g. Northville)
 		Summit/EXA (IBM x440)
-		Unisys ES7000 IA32 series
 		Moorestown MID devices
 
 	  If you have one of these systems, or if you want to build a
@@ -489,7 +488,7 @@ config X86_32_NON_STANDARD
 	depends on X86_32 && SMP
 	depends on X86_EXTENDED_PLATFORM
 	---help---
-	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
+	  This option compiles in the NUMAQ, Summit, bigsmp,
 	  STA2X11, default subarchitectures.  It is intended for a generic
 	  binary kernel. If you select them all, kernel will probe it
 	  one by one and will fallback to default.
@@ -555,13 +554,6 @@ config X86_SUMMIT
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
 
-config X86_ES7000
-	bool "Unisys ES7000 IA32 series"
-	depends on X86_32_NON_STANDARD && X86_BIGSMP
-	---help---
-	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
-	  supposed to run on an IA32-based Unisys ES7000 system.
-
 config X86_32_IRIS
 	tristate "Eurobraille/Iris poweroff module"
 	depends on X86_32
@@ -820,7 +812,7 @@ config NR_CPUS
 	range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
 	default "1" if !SMP
 	default "8192" if MAXSMP
-	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
+	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	default "8" if SMP
 	---help---
 	  This allows you to specify the maximum number of CPUs which this
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 1dac94265b59..bcdace45b000 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -907,10 +907,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #ifdef	CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
 
-#ifdef CONFIG_X86_ES7000
-extern int es7000_plat;
-#endif
-
 void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 {
 	int ioapic;
@@ -960,14 +956,6 @@ void __init mp_config_acpi_legacy_irqs(void)
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
 	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
 
-#ifdef CONFIG_X86_ES7000
-	/*
-	 * Older generations of ES7000 have no legacy identity mappings
-	 */
-	if (es7000_plat == 1)
-		return;
-#endif
-
 	/*
 	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overridden by (MADT) interrupt source override entries.
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 0ae0323b1f9c..7b600c68ed20 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -21,7 +21,6 @@ endif
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_SUMMIT)	+= summit_32.o
 obj-$(CONFIG_X86_BIGSMP)	+= bigsmp_32.o
-obj-$(CONFIG_X86_ES7000)	+= es7000_32.o
 
 # For 32bit, probe_32 need to be listed last
 obj-$(CONFIG_X86_LOCAL_APIC)	+= probe_$(BITS).o
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
deleted file mode 100644
index 6f8f8b348a39..000000000000
--- a/arch/x86/kernel/apic/es7000_32.c
+++ /dev/null
@@ -1,738 +0,0 @@
-/*
- * Written by: Garry Forsgren, Unisys Corporation
- *             Natalie Protasevich, Unisys Corporation
- *
- * This file contains the code to configure and interface
- * with Unisys ES7000 series hardware system manager.
- *
- * Copyright (c) 2003 Unisys Corporation.
- * Copyright (C) 2009, Red Hat, Inc., Ingo Molnar
- *
- *   All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Contact information: Unisys Corporation, Township Line & Union Meeting
- * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or:
- *
- * http://www.unisys.com
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/notifier.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/threads.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/nmi.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/apicdef.h>
-#include <linux/atomic.h>
-#include <asm/fixmap.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/ipi.h>
-
-/*
- * ES7000 chipsets
- */
-
-#define NON_UNISYS			0
-#define ES7000_CLASSIC			1
-#define ES7000_ZORRO			2
-
-#define	MIP_REG				1
-#define	MIP_PSAI_REG			4
-
-#define	MIP_BUSY			1
-#define	MIP_SPIN			0xf0000
-#define	MIP_VALID			0x0100000000000000ULL
-#define	MIP_SW_APIC			0x1020b
-
-#define	MIP_PORT(val)			((val >> 32) & 0xffff)
-
-#define	MIP_RD_LO(val)			(val & 0xffffffff)
-
-struct mip_reg {
-	unsigned long long		off_0x00;
-	unsigned long long		off_0x08;
-	unsigned long long		off_0x10;
-	unsigned long long		off_0x18;
-	unsigned long long		off_0x20;
-	unsigned long long		off_0x28;
-	unsigned long long		off_0x30;
-	unsigned long long		off_0x38;
-};
-
-struct mip_reg_info {
-	unsigned long long		mip_info;
-	unsigned long long		delivery_info;
-	unsigned long long		host_reg;
-	unsigned long long		mip_reg;
-};
-
-struct psai {
-	unsigned long long		entry_type;
-	unsigned long long		addr;
-	unsigned long long		bep_addr;
-};
-
-#ifdef CONFIG_ACPI
-
-struct es7000_oem_table {
-	struct acpi_table_header	Header;
-	u32				OEMTableAddr;
-	u32				OEMTableSize;
-};
-
-static unsigned long			oem_addrX;
-static unsigned long			oem_size;
-
-#endif
-
-/*
- * ES7000 Globals
- */
-
-static volatile unsigned long		*psai;
-static struct mip_reg			*mip_reg;
-static struct mip_reg			*host_reg;
-static int 				mip_port;
-static unsigned long			mip_addr;
-static unsigned long			host_addr;
-
-int					es7000_plat;
-
-/*
- * GSI override for ES7000 platforms.
- */
-
-
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
-{
-	unsigned long vect = 0, psaival = 0;
-
-	if (psai == NULL)
-		return -1;
-
-	vect = ((unsigned long)__pa(eip)/0x1000) << 16;
-	psaival = (0x1000000 | vect | cpu);
-
-	while (*psai & 0x1000000)
-		;
-
-	*psai = psaival;
-
-	return 0;
-}
-
-static int es7000_apic_is_cluster(void)
-{
-	/* MPENTIUMIII */
-	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
-		return 1;
-
-	return 0;
-}
-
-static void setup_unisys(void)
-{
-	/*
-	 * Determine the generation of the ES7000 currently running.
-	 *
-	 * es7000_plat = 1 if the machine is a 5xx ES7000 box
-	 * es7000_plat = 2 if the machine is a x86_64 ES7000 box
-	 *
-	 */
-	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = ES7000_ZORRO;
-	else
-		es7000_plat = ES7000_CLASSIC;
-}
-
-/*
- * Parse the OEM Table:
- */
-static int parse_unisys_oem(char *oemptr)
-{
-	int			i;
-	int 			success = 0;
-	unsigned char		type, size;
-	unsigned long		val;
-	char			*tp = NULL;
-	struct psai		*psaip = NULL;
-	struct mip_reg_info 	*mi;
-	struct mip_reg		*host, *mip;
-
-	tp = oemptr;
-
-	tp += 8;
-
-	for (i = 0; i <= 6; i++) {
-		type = *tp++;
-		size = *tp++;
-		tp -= 2;
-		switch (type) {
-		case MIP_REG:
-			mi = (struct mip_reg_info *)tp;
-			val = MIP_RD_LO(mi->host_reg);
-			host_addr = val;
-			host = (struct mip_reg *)val;
-			host_reg = __va(host);
-			val = MIP_RD_LO(mi->mip_reg);
-			mip_port = MIP_PORT(mi->mip_info);
-			mip_addr = val;
-			mip = (struct mip_reg *)val;
-			mip_reg = __va(mip);
-			pr_debug("host_reg = 0x%lx\n",
-				 (unsigned long)host_reg);
-			pr_debug("mip_reg = 0x%lx\n",
-				 (unsigned long)mip_reg);
-			success++;
-			break;
-		case MIP_PSAI_REG:
-			psaip = (struct psai *)tp;
-			if (tp != NULL) {
-				if (psaip->addr)
-					psai = __va(psaip->addr);
-				else
-					psai = NULL;
-				success++;
-			}
-			break;
-		default:
-			break;
-		}
-		tp += size;
-	}
-
-	if (success < 2)
-		es7000_plat = NON_UNISYS;
-	else
-		setup_unisys();
-
-	return es7000_plat;
-}
-
-#ifdef CONFIG_ACPI
-static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
-{
-	struct acpi_table_header *header = NULL;
-	struct es7000_oem_table *table;
-	acpi_size tbl_size;
-	acpi_status ret;
-	int i = 0;
-
-	for (;;) {
-		ret = acpi_get_table_with_size("OEM1", i++, &header, &tbl_size);
-		if (!ACPI_SUCCESS(ret))
-			return -1;
-
-		if (!memcmp((char *) &header->oem_id, "UNISYS", 6))
-			break;
-
-		early_acpi_os_unmap_memory(header, tbl_size);
-	}
-
-	table = (void *)header;
-
-	oem_addrX	= table->OEMTableAddr;
-	oem_size	= table->OEMTableSize;
-
-	early_acpi_os_unmap_memory(header, tbl_size);
-
-	*oem_addr	= (unsigned long)__acpi_map_table(oem_addrX, oem_size);
-
-	return 0;
-}
-
-static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
-{
-	if (!oem_addr)
-		return;
-
-	__acpi_unmap_table((char *)oem_addr, oem_size);
-}
-
-static int es7000_check_dsdt(void)
-{
-	struct acpi_table_header header;
-
-	if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
-	    !strncmp(header.oem_id, "UNISYS", 6))
-		return 1;
-	return 0;
-}
-
-static int es7000_acpi_ret;
-
-/* Hook from generic ACPI tables.c */
-static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	unsigned long oem_addr = 0;
-	int check_dsdt;
-	int ret = 0;
-
-	/* check dsdt at first to avoid clear fix_map for oem_addr */
-	check_dsdt = es7000_check_dsdt();
-
-	if (!find_unisys_acpi_oem_table(&oem_addr)) {
-		if (check_dsdt) {
-			ret = parse_unisys_oem((char *)oem_addr);
-		} else {
-			setup_unisys();
-			ret = 1;
-		}
-		/*
-		 * we need to unmap it
-		 */
-		unmap_unisys_acpi_oem_table(oem_addr);
-	}
-
-	es7000_acpi_ret = ret;
-
-	return ret && !es7000_apic_is_cluster();
-}
-
-static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
-{
-	int ret = es7000_acpi_ret;
-
-	return ret && es7000_apic_is_cluster();
-}
-
-#else /* !CONFIG_ACPI: */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-
-static int es7000_acpi_madt_oem_check_cluster(char *oem_id, char *oem_table_id)
-{
-	return 0;
-}
-#endif /* !CONFIG_ACPI */
-
-static void es7000_spin(int n)
-{
-	int i = 0;
-
-	while (i++ < n)
-		rep_nop();
-}
-
-static int es7000_mip_write(struct mip_reg *mip_reg)
-{
-	int status = 0;
-	int spin;
-
-	spin = MIP_SPIN;
-	while ((host_reg->off_0x38 & MIP_VALID) != 0) {
-		if (--spin <= 0) {
-			WARN(1,	"Timeout waiting for Host Valid Flag\n");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	memcpy(host_reg, mip_reg, sizeof(struct mip_reg));
-	outb(1, mip_port);
-
-	spin = MIP_SPIN;
-
-	while ((mip_reg->off_0x38 & MIP_VALID) == 0) {
-		if (--spin <= 0) {
-			WARN(1,	"Timeout waiting for MIP Valid Flag\n");
-			return -1;
-		}
-		es7000_spin(MIP_SPIN);
-	}
-
-	status = (mip_reg->off_0x00 & 0xffff0000000000ULL) >> 48;
-	mip_reg->off_0x38 &= ~MIP_VALID;
-
-	return status;
-}
-
-static void es7000_enable_apic_mode(void)
-{
-	struct mip_reg es7000_mip_reg;
-	int mip_status;
-
-	if (!es7000_plat)
-		return;
-
-	pr_info("Enabling APIC mode.\n");
-	memset(&es7000_mip_reg, 0, sizeof(struct mip_reg));
-	es7000_mip_reg.off_0x00 = MIP_SW_APIC;
-	es7000_mip_reg.off_0x38 = MIP_VALID;
-
-	while ((mip_status = es7000_mip_write(&es7000_mip_reg)) != 0)
-		WARN(1, "Command failed, status = %x\n", mip_status);
-}
-
-static unsigned int es7000_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-static void es7000_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(mask, vector);
-}
-
-static void es7000_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
-}
-
-static void es7000_send_IPI_all(int vector)
-{
-	es7000_send_IPI_mask(cpu_online_mask, vector);
-}
-
-static int es7000_apic_id_registered(void)
-{
-	return 1;
-}
-
-static const struct cpumask *target_cpus_cluster(void)
-{
-	return cpu_all_mask;
-}
-
-static const struct cpumask *es7000_target_cpus(void)
-{
-	return cpumask_of(smp_processor_id());
-}
-
-static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid)
-{
-	return 0;
-}
-
-static unsigned long es7000_check_apicid_present(int bit)
-{
-	return physid_isset(bit, phys_cpu_present_map);
-}
-
-static int es7000_early_logical_apicid(int cpu)
-{
-	/* on es7000, logical apicid is the same as physical */
-	return early_per_cpu(x86_bios_cpu_apicid, cpu);
-}
-
-static unsigned long calculate_ldr(int cpu)
-{
-	unsigned long id = per_cpu(x86_bios_cpu_apicid, cpu);
-
-	return SET_APIC_LOGICAL_ID(id);
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LdR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static void es7000_init_apic_ldr_cluster(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_CLUSTER);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static void es7000_setup_apic_routing(void)
-{
-	int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
-
-	pr_info("Enabling APIC mode:  %s. Using %d I/O APICs, target cpus %lx\n",
-		(apic_version[apic] == 0x14) ?
-			"Physical Cluster" : "Logical Cluster",
-		nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
-}
-
-static int es7000_cpu_present_to_apicid(int mps_cpu)
-{
-	if (!mps_cpu)
-		return boot_cpu_physical_apicid;
-	else if (mps_cpu < nr_cpu_ids)
-		return per_cpu(x86_bios_cpu_apicid, mps_cpu);
-	else
-		return BAD_APICID;
-}
-
-static int cpu_id;
-
-static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
-{
-	physid_set_mask_of_physid(cpu_id, retmap);
-	++cpu_id;
-}
-
-static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	physids_promote(0xFFL, retmap);
-}
-
-static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
-{
-	boot_cpu_physical_apicid = read_apic_id();
-	return 1;
-}
-
-static inline int
-es7000_cpu_mask_to_apicid(const struct cpumask *cpumask, unsigned int *dest_id)
-{
-	unsigned int round = 0;
-	unsigned int cpu, uninitialized_var(apicid);
-
-	/*
-	 * The cpus in the mask must all be on the apic cluster.
-	 */
-	for_each_cpu_and(cpu, cpumask, cpu_online_mask) {
-		int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
-
-		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-			WARN(1, "Not a valid mask!");
-
-			return -EINVAL;
-		}
-		apicid |= new_apicid;
-		round++;
-	}
-	if (!round)
-		return -EINVAL;
-	*dest_id = apicid;
-	return 0;
-}
-
-static int
-es7000_cpu_mask_to_apicid_and(const struct cpumask *inmask,
-			      const struct cpumask *andmask,
-			      unsigned int *apicid)
-{
-	cpumask_var_t cpumask;
-	*apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
-
-	if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
-		return 0;
-
-	cpumask_and(cpumask, inmask, andmask);
-	es7000_cpu_mask_to_apicid(cpumask, apicid);
-
-	free_cpumask_var(cpumask);
-
-	return 0;
-}
-
-static int es7000_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-static int probe_es7000(void)
-{
-	/* probed later in mptable/ACPI hooks */
-	return 0;
-}
-
-static int es7000_mps_ret;
-static int es7000_mps_oem_check(struct mpc_table *mpc, char *oem,
-		char *productid)
-{
-	int ret = 0;
-
-	if (mpc->oemptr) {
-		struct mpc_oemtable *oem_table =
-			(struct mpc_oemtable *)mpc->oemptr;
-
-		if (!strncmp(oem, "UNISYS", 6))
-			ret = parse_unisys_oem((char *)oem_table);
-	}
-
-	es7000_mps_ret = ret;
-
-	return ret && !es7000_apic_is_cluster();
-}
-
-static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
-		char *productid)
-{
-	int ret = es7000_mps_ret;
-
-	return ret && es7000_apic_is_cluster();
-}
-
-/* We've been warned by a false positive warning.Use __refdata to keep calm. */
-static struct apic __refdata apic_es7000_cluster = {
-
-	.name				= "es7000",
-	.probe				= probe_es7000,
-	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check_cluster,
-	.apic_id_valid			= default_apic_id_valid,
-	.apic_id_registered		= es7000_apic_id_registered,
-
-	.irq_delivery_mode		= dest_LowestPrio,
-	/* logical delivery broadcast to all procs: */
-	.irq_dest_mode			= 1,
-
-	.target_cpus			= target_cpus_cluster,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= es7000_check_apicid_used,
-	.check_apicid_present		= es7000_check_apicid_present,
-
-	.vector_allocation_domain	= flat_vector_allocation_domain,
-	.init_apic_ldr			= es7000_init_apic_ldr_cluster,
-
-	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
-	.setup_apic_routing		= es7000_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
-	.enable_apic_mode		= es7000_enable_apic_mode,
-	.phys_pkg_id			= es7000_phys_pkg_id,
-	.mps_oem_check			= es7000_mps_oem_check_cluster,
-
-	.get_apic_id			= es7000_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= es7000_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
-	.send_IPI_all			= es7000_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.wakeup_secondary_cpu		= wakeup_secondary_cpu_via_mip,
-
-	.trampoline_phys_low		= 0x467,
-	.trampoline_phys_high		= 0x469,
-
-	.wait_for_init_deassert		= false,
-	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.eoi_write			= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-
-	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
-};
-
-static struct apic __refdata apic_es7000 = {
-
-	.name				= "es7000",
-	.probe				= probe_es7000,
-	.acpi_madt_oem_check		= es7000_acpi_madt_oem_check,
-	.apic_id_valid			= default_apic_id_valid,
-	.apic_id_registered		= es7000_apic_id_registered,
-
-	.irq_delivery_mode		= dest_Fixed,
-	/* phys delivery to target CPUs: */
-	.irq_dest_mode			= 0,
-
-	.target_cpus			= es7000_target_cpus,
-	.disable_esr			= 1,
-	.dest_logical			= 0,
-	.check_apicid_used		= es7000_check_apicid_used,
-	.check_apicid_present		= es7000_check_apicid_present,
-
-	.vector_allocation_domain	= flat_vector_allocation_domain,
-	.init_apic_ldr			= es7000_init_apic_ldr,
-
-	.ioapic_phys_id_map		= es7000_ioapic_phys_id_map,
-	.setup_apic_routing		= es7000_setup_apic_routing,
-	.multi_timer_check		= NULL,
-	.cpu_present_to_apicid		= es7000_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= es7000_apicid_to_cpu_present,
-	.setup_portio_remap		= NULL,
-	.check_phys_apicid_present	= es7000_check_phys_apicid_present,
-	.enable_apic_mode		= es7000_enable_apic_mode,
-	.phys_pkg_id			= es7000_phys_pkg_id,
-	.mps_oem_check			= es7000_mps_oem_check,
-
-	.get_apic_id			= es7000_get_apic_id,
-	.set_apic_id			= NULL,
-	.apic_id_mask			= 0xFF << 24,
-
-	.cpu_mask_to_apicid_and		= es7000_cpu_mask_to_apicid_and,
-
-	.send_IPI_mask			= es7000_send_IPI_mask,
-	.send_IPI_mask_allbutself	= NULL,
-	.send_IPI_allbutself		= es7000_send_IPI_allbutself,
-	.send_IPI_all			= es7000_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-
-	.trampoline_phys_low		= 0x467,
-	.trampoline_phys_high		= 0x469,
-
-	.wait_for_init_deassert		= true,
-	/* Nothing to do for most platforms, since cleared by the INIT cycle: */
-	.smp_callin_clear_local_apic	= NULL,
-	.inquire_remote_apic		= default_inquire_remote_apic,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.eoi_write			= native_apic_mem_write,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= native_apic_wait_icr_idle,
-	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
-
-	.x86_32_early_logical_apicid	= es7000_early_logical_apicid,
-};
-
-/*
- * Need to check for es7000 followed by es7000_cluster, so this order
- * in apic_drivers is important.
- */
-apic_drivers(apic_es7000, apic_es7000_cluster);