summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAbhilash Kesavan <a.kesavan@samsung.com>2014-11-01 09:30:43 +0530
committerJonathan Cameron <jic23@kernel.org>2014-11-05 15:38:25 +0000
commitc1b501564c98a94b48f4ed936737403108dc7300 (patch)
treef099f3c59337f23e1012954e5187b00d86d35a84
parentdb9bf4d6577f23b9a9ee4f70c07a51946ed111a7 (diff)
downloadlinux-stable-c1b501564c98a94b48f4ed936737403108dc7300.tar.gz
linux-stable-c1b501564c98a94b48f4ed936737403108dc7300.tar.bz2
linux-stable-c1b501564c98a94b48f4ed936737403108dc7300.zip
iio: adc: exynos_adc: Add support for exynos7
The ADC on exynos7 is quite similar to ADCv2. The differences are as follows: - exynos7-adc has 8 input channels (as against 10 in ADCv2). - exynos7 does not include an ADC PHY control register. - Some ADC_CON2 register bits being used in ADCv2 are listed as reserved in exynos7-adc. This results in a different init_hw function for exynos7. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt2
-rw-r--r--drivers/iio/adc/exynos_adc.c32
2 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index c36821095393..f46ca9a316a2 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -16,6 +16,8 @@ Required properties:
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
+ Must be "samsung,exynos7-adc" for
+ the ADC in Exynos7 and compatibles
Must be "samsung,s3c2410-adc" for
the ADC in s3c2410 and compatibles
Must be "samsung,s3c2416-adc" for
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index fe0317745436..3a2dbb3b4926 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -390,6 +390,35 @@ static const struct exynos_adc_data exynos3250_adc_data = {
.start_conv = exynos_adc_v2_start_conv,
};
+static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->data->needs_adc_phy)
+ regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = readl(ADC_V2_CON2(info->regs));
+ con2 &= ~ADC_V2_CON2_C_TIME(7);
+ con2 |= ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data exynos7_adc_data = {
+ .num_channels = MAX_ADC_V1_CHANNELS,
+ .mask = ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+ .init_hw = exynos_adc_exynos7_init_hw,
+ .exit_hw = exynos_adc_v2_exit_hw,
+ .clear_irq = exynos_adc_v2_clear_irq,
+ .start_conv = exynos_adc_v2_start_conv,
+};
+
static const struct of_device_id exynos_adc_match[] = {
{
.compatible = "samsung,s3c2410-adc",
@@ -415,6 +444,9 @@ static const struct of_device_id exynos_adc_match[] = {
}, {
.compatible = "samsung,exynos3250-adc",
.data = &exynos3250_adc_data,
+ }, {
+ .compatible = "samsung,exynos7-adc",
+ .data = &exynos7_adc_data,
},
{},
};