diff options
author | Srinivas Kandagatla <srinivas.kandagatla@st.com> | 2014-02-11 09:59:57 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-02-13 16:25:13 -0500 |
commit | d15891ca1fdd7f1f46cede1dc15bcfbf0445a658 (patch) | |
tree | 7786700665def3cf794e59dfa99b3d1d74e58fa2 | |
parent | c7966b525fc6af6d18a509b33f938312f59b57f5 (diff) | |
download | linux-stable-d15891ca1fdd7f1f46cede1dc15bcfbf0445a658.tar.gz linux-stable-d15891ca1fdd7f1f46cede1dc15bcfbf0445a658.tar.bz2 linux-stable-d15891ca1fdd7f1f46cede1dc15bcfbf0445a658.zip |
net: stmmac:sti: Add STi SOC glue driver.
STi series SOCs have a glue layer on top of the synopsis gmac IP, this
glue layer needs to be configured before the gmac driver starts using
the IP.
This patch adds a support to this glue layer which is configured via
stmmac setup, init, exit callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | Documentation/devicetree/bindings/net/sti-dwmac.txt | 58 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 330 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 |
6 files changed, 408 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt new file mode 100644 index 000000000000..3dd3d0bf112f --- /dev/null +++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt @@ -0,0 +1,58 @@ +STMicroelectronics SoC DWMAC glue layer controller + +The device node has following properties. + +Required properties: + - compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or + "st,stid127-dwmac". + - reg : Offset of the glue configuration register map in system + configuration regmap pointed by st,syscon property and size. + + - reg-names : Should be "sti-ethconf". + + - st,syscon : Should be phandle to system configuration node which + encompases this glue registers. + + - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be + wired up in from different sources. One via TXCLK pin and other via CLK_125 + pin. This wiring is totally board dependent. However the retiming glue + logic should be configured accordingly. Possible values for this property + + "txclk" - if 125Mhz clock is wired up via txclk line. + "clk_125" - if 125Mhz clock is wired up via clk_125 line. + + This property is only valid for Giga bit setup( GMII, RGMII), and it is + un-used for non-giga bit (MII and RMII) setups. Also note that internal + clockgen can not generate stable 125Mhz clock. + + - st,ext-phyclk: This boolean property indicates who is generating the clock + for tx and rx. This property is only valid for RMII case where the clock can + be generated from the MAC or PHY. + + - clock-names: should be "sti-ethclk". + - clocks: Should point to ethernet clockgen which can generate phyclk. + + +Example: + +ethernet0: dwmac@fe810000 { + device_type = "network"; + compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0xfe810000 0x8000>, <0x8bc 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; + interrupts = <0 133 0>, <0 134 0>, <0 135 0>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + phy-mode = "mii"; + + st,syscon = <&syscfg_rear>; + + snps,pbl = <32>; + snps,mixed-burst; + + resets = <&softreset STIH416_ETH0_SOFTRESET>; + reset-names = "stmmaceth"; + pinctrl-0 = <&pinctrl_mii0>; + pinctrl-names = "default"; + clocks = <&CLK_S_GMAC0_PHY>; + clock-names = "stmmaceth"; +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index e2f202e3932f..f2d7c702c77f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -37,6 +37,17 @@ config DWMAC_SUNXI stmmac device driver. This driver is used for A20/A31 GMAC ethernet controller. +config DWMAC_STI + bool "STi GMAC support" + depends on STMMAC_PLATFORM && ARCH_STI + default y + ---help--- + Support for ethernet controller on STi SOCs. + + This selects STi SoC glue layer support for the stmmac + device driver. This driver is used on for the STi series + SOCs GMAC ethernet controller. + config STMMAC_PCI bool "STMMAC PCI bus support" depends on STMMAC_ETH && PCI diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index ecadecea79b2..dcef28775dad 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o +stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c new file mode 100644 index 000000000000..552bbc17863c --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -0,0 +1,330 @@ +/** + * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/stmmac.h> +#include <linux/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_net.h> + +/** + * STi GMAC glue logic. + * -------------------- + * + * _ + * | \ + * --------|0 \ ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * phyclk | |___________________________________________ + * | | | (phyclk-in) + * --------|1 / | + * int-clk |_ / | + * | _ + * | | \ + * |_______|1 \ ETH_SEL_TX_RETIME_CLK + * | |___________________________ + * | | (tx-retime-clk) + * _______|0 / + * | |_ / + * _ | + * | \ | + * --------|0 \ | + * clk_125 | |__| + * | | ETH_SEL_TXCLK_NOT_CLK125 + * --------|1 / + * txclk |_ / + * + * + * ETH_SEL_INTERNAL_NOTEXT_PHYCLK is valid only for RMII where PHY can + * generate 50MHz clock or MAC can generate it. + * This bit is configured by "st,ext-phyclk" property. + * + * ETH_SEL_TXCLK_NOT_CLK125 is only valid for gigabit modes, where the 125Mhz + * clock either comes from clk-125 pin or txclk pin. This configuration is + * totally driven by the board wiring. This bit is configured by + * "st,tx-retime-src" property. + * + * TXCLK configuration is different for different phy interface modes + * and changes according to link speed in modes like RGMII. + * + * Below table summarizes the clock requirement and clock sources for + * supported phy interface modes with link speeds. + * ________________________________________________ + *| PHY_MODE | 1000 Mbit Link | 100 Mbit Link | + * ------------------------------------------------ + *| MII | n/a | 25Mhz | + *| | | txclk | + * ------------------------------------------------ + *| GMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | txclk | + * ------------------------------------------------ + *| RGMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | clkgen | + * ------------------------------------------------ + *| RMII | n/a | 25Mhz | + *| | |clkgen/phyclk-in | + * ------------------------------------------------ + * + * TX lines are always retimed with a clk, which can vary depending + * on the board configuration. Below is the table of these bits + * in eth configuration register depending on source of retime clk. + * + *--------------------------------------------------------------- + * src | tx_rt_clk | int_not_ext_phyclk | txclk_n_clk125| + *--------------------------------------------------------------- + * txclk | 0 | n/a | 1 | + *--------------------------------------------------------------- + * ck_125| 0 | n/a | 0 | + *--------------------------------------------------------------- + * phyclk| 1 | 0 | n/a | + *--------------------------------------------------------------- + * clkgen| 1 | 1 | n/a | + *--------------------------------------------------------------- + */ + + /* Register definition */ + + /* 3 bits [8:6] + * [6:6] ETH_SEL_TXCLK_NOT_CLK125 + * [7:7] ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * [8:8] ETH_SEL_TX_RETIME_CLK + * + */ + +#define TX_RETIME_SRC_MASK GENMASK(8, 6) +#define ETH_SEL_TX_RETIME_CLK BIT(8) +#define ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7) +#define ETH_SEL_TXCLK_NOT_CLK125 BIT(6) + +#define ENMII_MASK GENMASK(5, 5) +#define ENMII BIT(5) + +/** + * 3 bits [4:2] + * 000-GMII/MII + * 001-RGMII + * 010-SGMII + * 100-RMII +*/ +#define MII_PHY_SEL_MASK GENMASK(4, 2) +#define ETH_PHY_SEL_RMII BIT(4) +#define ETH_PHY_SEL_SGMII BIT(3) +#define ETH_PHY_SEL_RGMII BIT(2) +#define ETH_PHY_SEL_GMII 0x0 +#define ETH_PHY_SEL_MII 0x0 + +#define IS_PHY_IF_MODE_RGMII(iface) (iface == PHY_INTERFACE_MODE_RGMII || \ + iface == PHY_INTERFACE_MODE_RGMII_ID || \ + iface == PHY_INTERFACE_MODE_RGMII_RXID || \ + iface == PHY_INTERFACE_MODE_RGMII_TXID) + +#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \ + iface == PHY_INTERFACE_MODE_GMII) + +struct sti_dwmac { + int interface; + bool ext_phyclk; + bool is_tx_retime_src_clk_125; + struct clk *clk; + int reg; + struct device *dev; + struct regmap *regmap; +}; + +static u32 phy_intf_sels[] = { + [PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII, + [PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII, + [PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII, + [PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII, +}; + +enum { + TX_RETIME_SRC_NA = 0, + TX_RETIME_SRC_TXCLK = 1, + TX_RETIME_SRC_CLK_125, + TX_RETIME_SRC_PHYCLK, + TX_RETIME_SRC_CLKGEN, +}; + +static const char *const tx_retime_srcs[] = { + [TX_RETIME_SRC_NA] = "", + [TX_RETIME_SRC_TXCLK] = "txclk", + [TX_RETIME_SRC_CLK_125] = "clk_125", + [TX_RETIME_SRC_PHYCLK] = "phyclk", + [TX_RETIME_SRC_CLKGEN] = "clkgen", +}; + +static u32 tx_retime_val[] = { + [TX_RETIME_SRC_TXCLK] = ETH_SEL_TXCLK_NOT_CLK125, + [TX_RETIME_SRC_CLK_125] = 0x0, + [TX_RETIME_SRC_PHYCLK] = ETH_SEL_TX_RETIME_CLK, + [TX_RETIME_SRC_CLKGEN] = ETH_SEL_TX_RETIME_CLK | + ETH_SEL_INTERNAL_NOTEXT_PHYCLK, +}; + +static void setup_retime_src(struct sti_dwmac *dwmac, u32 spd) +{ + u32 src = 0, freq = 0; + + if (spd == SPEED_100) { + if (dwmac->interface == PHY_INTERFACE_MODE_MII || + dwmac->interface == PHY_INTERFACE_MODE_GMII) { + src = TX_RETIME_SRC_TXCLK; + } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) { + if (dwmac->ext_phyclk) { + src = TX_RETIME_SRC_PHYCLK; + } else { + src = TX_RETIME_SRC_CLKGEN; + freq = 50000000; + } + + } else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) { + src = TX_RETIME_SRC_CLKGEN; + freq = 25000000; + } + + if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk) + clk_set_rate(dwmac->clk, freq); + + } else if (spd == SPEED_1000) { + if (dwmac->is_tx_retime_src_clk_125) + src = TX_RETIME_SRC_CLK_125; + else + src = TX_RETIME_SRC_TXCLK; + } + + regmap_update_bits(dwmac->regmap, dwmac->reg, + TX_RETIME_SRC_MASK, tx_retime_val[src]); +} + +static void sti_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + + if (dwmac->clk) + clk_disable_unprepare(dwmac->clk); +} + +static void sti_fix_mac_speed(void *priv, unsigned int spd) +{ + struct sti_dwmac *dwmac = priv; + + setup_retime_src(dwmac, spd); + + return; +} + +static int sti_dwmac_parse_data(struct sti_dwmac *dwmac, + struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct regmap *regmap; + int err; + + if (!np) + return -EINVAL; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-ethconf"); + if (!res) + return -ENODATA; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + dwmac->dev = dev; + dwmac->interface = of_get_phy_mode(np); + dwmac->regmap = regmap; + dwmac->reg = res->start; + dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk"); + dwmac->is_tx_retime_src_clk_125 = false; + + if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) { + const char *rs; + + err = of_property_read_string(np, "st,tx-retime-src", &rs); + if (err < 0) { + dev_err(dev, "st,tx-retime-src not specified\n"); + return err; + } + + if (!strcasecmp(rs, "clk_125")) + dwmac->is_tx_retime_src_clk_125 = true; + } + + dwmac->clk = devm_clk_get(dev, "sti-ethclk"); + + if (IS_ERR(dwmac->clk)) + dwmac->clk = NULL; + + return 0; +} + +static int sti_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + struct regmap *regmap = dwmac->regmap; + int iface = dwmac->interface; + u32 reg = dwmac->reg; + u32 val, spd; + + if (dwmac->clk) + clk_prepare_enable(dwmac->clk); + + regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]); + + val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII; + regmap_update_bits(regmap, reg, ENMII_MASK, val); + + if (IS_PHY_IF_MODE_GBIT(iface)) + spd = SPEED_1000; + else + spd = SPEED_100; + + setup_retime_src(dwmac, spd); + + return 0; +} + +static void *sti_dwmac_setup(struct platform_device *pdev) +{ + struct sti_dwmac *dwmac; + int ret; + + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); + if (!dwmac) + return ERR_PTR(-ENOMEM); + + ret = sti_dwmac_parse_data(dwmac, pdev); + if (ret) { + dev_err(&pdev->dev, "Unable to parse OF data\n"); + return ERR_PTR(ret); + } + + return dwmac; +} + +const struct stmmac_of_data sti_gmac_data = { + .fix_mac_speed = sti_fix_mac_speed, + .setup = sti_dwmac_setup, + .init = sti_dwmac_init, + .exit = sti_dwmac_exit, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index d9af26ed58ee..f9e60d7918c4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -133,6 +133,9 @@ bool stmmac_eee_init(struct stmmac_priv *priv); #ifdef CONFIG_DWMAC_SUNXI extern const struct stmmac_of_data sun7i_gmac_data; #endif +#ifdef CONFIG_DWMAC_STI +extern const struct stmmac_of_data sti_gmac_data; +#endif extern struct platform_driver stmmac_pltfr_driver; static inline int stmmac_register_platform(void) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 5884a7d2063b..c61bc72b8e90 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -33,6 +33,11 @@ static const struct of_device_id stmmac_dt_ids[] = { #ifdef CONFIG_DWMAC_SUNXI { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, #endif +#ifdef CONFIG_DWMAC_STI + { .compatible = "st,stih415-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stih416-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stih127-dwmac", .data = &sti_gmac_data}, +#endif /* SoC specific glue layers should come before generic bindings */ { .compatible = "st,spear600-gmac"}, { .compatible = "snps,dwmac-3.610"}, |