summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>2011-12-20 22:54:18 +0100
committerTony Lindgren <tony@atomide.com>2011-12-21 10:47:01 -0800
commitf7519d8c8290765a9408a52db4ba4a368ff72ca5 (patch)
tree2942b23d36d15a87588e1a1660b0f552c02eedae
parentc116abc43df9ce3ebe5fbf2fbd6ae2edd6a9bd87 (diff)
downloadlinux-stable-f7519d8c8290765a9408a52db4ba4a368ff72ca5.tar.gz
linux-stable-f7519d8c8290765a9408a52db4ba4a368ff72ca5.tar.bz2
linux-stable-f7519d8c8290765a9408a52db4ba4a368ff72ca5.zip
ARM: OMAP1: ams-delta: register latch dependent devices later
In preparation to converting Amstrad Delta on-board latches to basic_mmio_gpio devices, registration of platform devices which depend on latches and will require initialization of their GPIO pins first, should be moved out of .machine_init down to late_initcall level, as the gpio-generic driver is not available until device_initcall time. The latch reset operation, which will be replaced with GPIO initialization, must also be moved to late_initcall for the same reason. Since there was already another, separate arch_initcall function for setting up one of those latch dependent devices, the on-board modem device, reuse that function, i.e., rename it to a name that matches the new purpose, extend with other device setup relocated from .machine_init, and move down to the late_initcall level. While being at it, add missing gpio_free() in case the modem platform device registration fails. Thanks to Tony Lindgren <tony@atomide.com> who suggested this approach instead of shifting up the gpio-generic driver initialization. In addition, defer registration of the Amstrad Delta ASoC and serio devices, done from their device driver files, until late_initcall time, as those drivers will depend on their GPIO pins already requested from the board late_init() function until updated to register their GPIO pins themselves. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c28
-rw-r--r--drivers/input/serio/ams_delta_serio.c2
-rw-r--r--sound/soc/omap/ams-delta.c2
3 files changed, 22 insertions, 10 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index b0f15d234a12..50987c91690f 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -275,11 +275,14 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
};
static struct platform_device *ams_delta_devices[] __initdata = {
- &ams_delta_nand_device,
&ams_delta_kp_device,
+ &ams_delta_camera_device,
+};
+
+static struct platform_device *late_devices[] __initdata = {
+ &ams_delta_nand_device,
&ams_delta_lcd_device,
&ams_delta_led_device,
- &ams_delta_camera_device,
};
static void __init ams_delta_init(void)
@@ -307,9 +310,6 @@ static void __init ams_delta_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
- /* Clear latch2 (NAND, LCD, modem enable) */
- ams_delta_latch2_write(~0, 0);
-
omap1_usb_init(&ams_delta_usb_config);
omap1_set_camera_info(&ams_delta_camera_platform_data);
#ifdef CONFIG_LEDS_TRIGGERS
@@ -345,13 +345,18 @@ static struct platform_device ams_delta_modem_device = {
},
};
-static int __init ams_delta_modem_init(void)
+static int __init late_init(void)
{
int err;
if (!machine_is_ams_delta())
return -ENODEV;
+ /* Clear latch2 (NAND, LCD, modem enable) */
+ ams_delta_latch2_write(~0, 0);
+
+ platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
@@ -367,9 +372,16 @@ static int __init ams_delta_modem_init(void)
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
- return platform_device_register(&ams_delta_modem_device);
+ err = platform_device_register(&ams_delta_modem_device);
+ if (err)
+ goto gpio_free;
+ return 0;
+
+gpio_free:
+ gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ return err;
}
-arch_initcall(ams_delta_modem_init);
+late_initcall(late_init);
static void __init ams_delta_map_io(void)
{
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index d4d08bd9205b..835d37abe62a 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -165,7 +165,7 @@ serio:
kfree(ams_delta_serio);
return err;
}
-module_init(ams_delta_serio_init);
+late_initcall(ams_delta_serio_init);
static void __exit ams_delta_serio_exit(void)
{
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index ccb8a6aa1817..be81bc791b11 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -636,7 +636,7 @@ err:
platform_device_put(ams_delta_audio_platform_device);
return ret;
}
-module_init(ams_delta_module_init);
+late_initcall(ams_delta_module_init);
static void __exit ams_delta_module_exit(void)
{