diff options
author | Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> | 2008-07-23 21:31:46 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-07-24 10:47:41 -0700 |
commit | 4a25e41831ee851c1365d8b41decc22493b18e6d (patch) | |
tree | 0612f52c1588f314df12a26059418a462ac69acc | |
parent | c6b044d6bab5e2878d408666469362fc200a889a (diff) | |
download | linux-stable-4a25e41831ee851c1365d8b41decc22493b18e6d.tar.gz linux-stable-4a25e41831ee851c1365d8b41decc22493b18e6d.tar.bz2 linux-stable-4a25e41831ee851c1365d8b41decc22493b18e6d.zip |
video: sh7760fb: SH7760/SH7763 LCDC framebuffer driver
Framebuffer driver for the SH7760/SH7763 integrated LCD controller.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Siegfried Schaefer <s.schaefer@schaefer-edv.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r-- | Documentation/fb/sh7760fb.txt | 131 | ||||
-rw-r--r-- | drivers/video/Kconfig | 13 | ||||
-rw-r--r-- | drivers/video/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/sh7760fb.c | 658 | ||||
-rw-r--r-- | include/asm-sh/sh7760fb.h | 197 |
5 files changed, 1000 insertions, 0 deletions
diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt new file mode 100644 index 000000000000..c87bfe5c630a --- /dev/null +++ b/Documentation/fb/sh7760fb.txt @@ -0,0 +1,131 @@ +SH7760/SH7763 integrated LCDC Framebuffer driver +================================================ + +0. Overwiew +----------- +The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which +supports (in theory) resolutions ranging from 1x1 to 1024x1024, +with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels. + +Caveats: +* Framebuffer memory must be a large chunk allocated at the top + of Area3 (HW requirement). Because of this requirement you should NOT + make the driver a module since at runtime it may become impossible to + get a large enough contiguous chunk of memory. + +* The driver does not support changing resolution while loaded + (displays aren't hotpluggable anyway) + +* Heavy flickering may be observed + a) if you're using 15/16bit color modes at >= 640x480 px resolutions, + b) during PCMCIA (or any other slow bus) activity. + +* Rotation works only 90degress clockwise, and only if horizontal + resolution is <= 320 pixels. + +files: drivers/video/sh7760fb.c + include/asm-sh/sh7760fb.h + Documentation/fb/sh7760fb.txt + +1. Platform setup +----------------- +SH7760: + Video data is fetched via the DMABRG DMA engine, so you have to + configure the SH DMAC for DMABRG mode (write 0x94808080 to the + DMARSRA register somewhere at boot). + + PFC registers PCCR and PCDR must be set to peripheral mode. + (write zeros to both). + +The driver does NOT do the above for you since board setup is, well, job +of the board setup code. + +2. Panel definitions +-------------------- +The LCDC must explicitly be told about the type of LCD panel +attached. Data must be wrapped in a "struct sh7760fb_platdata" and +passed to the driver as platform_data. + +Suggest you take a closer look at the SH7760 Manual, Section 30. +(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf) + +The following code illustrates what needs to be done to +get the framebuffer working on a 640x480 TFT: + +====================== cut here ====================================== + +#include <linux/fb.h> +#include <asm/sh7760fb.h> + +/* + * NEC NL6440bc26-01 640x480 TFT + * dotclock 25175 kHz + * Xres 640 Yres 480 + * Htotal 800 Vtotal 525 + * HsynStart 656 VsynStart 490 + * HsynLenn 30 VsynLenn 2 + * + * The linux framebuffer layer does not use the syncstart/synclen + * values but right/left/upper/lower margin values. The comments + * for the x_margin explain how to calculate those from given + * panel sync timings. + */ +static struct fb_videomode nl6448bc26 = { + .name = "NL6448BC26", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39683, /* in picoseconds! */ + .hsync_len = 30, + .vsync_len = 2, + .left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */ + .right_margin = 16, /* HSYNSTART - XRES */ + .upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */ + .lower_margin = 10, /* VSYNSTART - YRES */ + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct sh7760fb_platdata sh7760fb_nl6448 = { + .def_mode = &nl6448bc26, + .ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */ + .lddfr = LDDFR_8BPP, /* we want 8bit output */ + .ldpmmr = 0x0070, + .ldpspr = 0x0500, + .ldaclnr = 0, + .ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) | + LDICKR_CLKDIV(1), + .rotate = 0, + .novsync = 1, + .blank = NULL, +}; + +/* SH7760: + * 0xFE300800: 256 * 4byte xRGB palette ram + * 0xFE300C00: 42 bytes ctrl registers + */ +static struct resource sh7760_lcdc_res[] = { + [0] = { + .start = 0xFE300800, + .end = 0xFE300CFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7760_lcdc_dev = { + .dev = { + .platform_data = &sh7760fb_nl6448, + }, + .name = "sh7760-lcdc", + .id = -1, + .resource = sh7760_lcdc_res, + .num_resources = ARRAY_SIZE(sh7760_lcdc_res), +}; + +====================== cut here ====================================== diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c1b7db843411..70d135e0cc47 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1991,6 +1991,19 @@ config FB_COBALT tristate "Cobalt server LCD frame buffer support" depends on FB && MIPS_COBALT +config FB_SH7760 + bool "SH7760/SH7763 LCDC support" + depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller. + Supports display resolutions up to 1024x1024 pixel, grayscale and + color operation, with depths ranging from 1 bpp to 8 bpp monochrome + and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for + panels <= 320 pixel horizontal resolution. + config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 358032597757..0ebc1bfd2514 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o obj-$(CONFIG_FB_MAXINE) += maxinefb.o obj-$(CONFIG_FB_METRONOME) += metronomefb.o obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o +obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o diff --git a/drivers/video/sh7760fb.c b/drivers/video/sh7760fb.c new file mode 100644 index 000000000000..4d0e28c5790b --- /dev/null +++ b/drivers/video/sh7760fb.c @@ -0,0 +1,658 @@ +/* + * SH7760/SH7763 LCDC Framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss <mano@roarinelk.homelinux.net> + * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.txt! + * + * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de> + * for his original source and testing! + */ + +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/fb.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/sh7760fb.h> + +struct sh7760fb_par { + void __iomem *base; + int irq; + + struct sh7760fb_platdata *pd; /* display information */ + + dma_addr_t fbdma; /* physical address */ + + int rot; /* rotation enabled? */ + + u32 pseudo_palette[16]; + + struct platform_device *dev; + struct resource *ioarea; + struct completion vsync; /* vsync irq event */ +}; + +static irqreturn_t sh7760fb_irq(int irq, void *data) +{ + struct completion *c = data; + + complete(c); + + return IRQ_HANDLED; +} + +static void sh7760fb_wait_vsync(struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + + if (par->pd->novsync) + return; + + iowrite16(ioread16(par->base + LDINTR) & ~VINT_CHECK, + par->base + LDINTR); + + if (par->irq < 0) { + /* poll for vert. retrace: status bit is sticky */ + while (!(ioread16(par->base + LDINTR) & VINT_CHECK)) + cpu_relax(); + } else { + /* a "wait_for_irq_event(par->irq)" would be extremely nice */ + init_completion(&par->vsync); + enable_irq(par->irq); + wait_for_completion(&par->vsync); + disable_irq_nosync(par->irq); + } +} + +/* wait_for_lps - wait until power supply has reached a certain state. */ +static int wait_for_lps(struct sh7760fb_par *par, int val) +{ + int i = 100; + while (--i && ((ioread16(par->base + LDPMMR) & 3) != val)) + msleep(1); + + if (i <= 0) + return -ETIMEDOUT; + + return 0; +} + +/* en/disable the LCDC */ +static int sh7760fb_blank(int blank, struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + struct sh7760fb_platdata *pd = par->pd; + unsigned short cntr = ioread16(par->base + LDCNTR); + unsigned short intr = ioread16(par->base + LDINTR); + int lps; + + if (blank == FB_BLANK_UNBLANK) { + intr |= VINT_START; + cntr = LDCNTR_DON2 | LDCNTR_DON; + lps = 3; + } else { + intr &= ~VINT_START; + cntr = LDCNTR_DON2; + lps = 0; + } + + if (pd->blank) + pd->blank(blank); + + iowrite16(intr, par->base + LDINTR); + iowrite16(cntr, par->base + LDCNTR); + + return wait_for_lps(par, lps); +} + +/* set color registers */ +static int sh7760fb_setcmap(struct fb_cmap *cmap, struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + u32 s = cmap->start; + u32 l = cmap->len; + u16 *r = cmap->red; + u16 *g = cmap->green; + u16 *b = cmap->blue; + u32 col, tmo; + int ret; + + ret = 0; + + sh7760fb_wait_vsync(info); + + /* request palette access */ + iowrite16(LDPALCR_PALEN, par->base + LDPALCR); + + /* poll for access grant */ + tmo = 100; + while (!(ioread16(par->base + LDPALCR) & LDPALCR_PALS) && (--tmo)) + cpu_relax(); + + if (!tmo) { + ret = 1; + dev_dbg(info->dev, "no palette access!\n"); + goto out; + } + + while (l && (s < 256)) { + col = ((*r) & 0xff) << 16; + col |= ((*g) & 0xff) << 8; + col |= ((*b) & 0xff); + col &= SH7760FB_PALETTE_MASK; + + if (s < 16) + ((u32 *) (info->pseudo_palette))[s] = s; + + s++; + l--; + r++; + g++; + b++; + } +out: + iowrite16(0, par->base + LDPALCR); + return ret; +} + +static void encode_fix(struct fb_fix_screeninfo *fix, struct fb_info *info, + unsigned long stride) +{ + memset(fix, 0, sizeof(struct fb_fix_screeninfo)); + strcpy(fix->id, "sh7760-lcdc"); + + fix->smem_start = (unsigned long)info->screen_base; + fix->smem_len = info->screen_size; + + fix->line_length = stride; +} + +static int sh7760fb_get_color_info(struct device *dev, + u16 lddfr, int *bpp, int *gray) +{ + int lbpp, lgray; + + lgray = lbpp = 0; + + switch (lddfr & LDDFR_COLOR_MASK) { + case LDDFR_1BPP_MONO: + lgray = 1; + lbpp = 1; + break; + case LDDFR_2BPP_MONO: + lgray = 1; + lbpp = 2; + break; + case LDDFR_4BPP_MONO: + lgray = 1; + case LDDFR_4BPP: + lbpp = 4; + break; + case LDDFR_6BPP_MONO: + lgray = 1; + case LDDFR_8BPP: + lbpp = 8; + break; + case LDDFR_16BPP_RGB555: + case LDDFR_16BPP_RGB565: + lbpp = 16; + lgray = 0; + break; + default: + dev_dbg(dev, "unsupported LDDFR bit depth.\n"); + return -EINVAL; + } + + if (bpp) + *bpp = lbpp; + if (gray) + *gray = lgray; + + return 0; +} + +static int sh7760fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct fb_fix_screeninfo *fix = &info->fix; + struct sh7760fb_par *par = info->par; + int ret, bpp; + + /* get color info from register value */ + ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL); + if (ret) + return ret; + + var->bits_per_pixel = bpp; + + if ((var->grayscale) && (var->bits_per_pixel == 1)) + fix->visual = FB_VISUAL_MONO10; + else if (var->bits_per_pixel >= 15) + fix->visual = FB_VISUAL_TRUECOLOR; + else + fix->visual = FB_VISUAL_PSEUDOCOLOR; + + /* TODO: add some more validation here */ + return 0; +} + +/* + * sh7760fb_set_par - set videomode. + * + * NOTE: The rotation, grayscale and DSTN codepaths are + * totally untested! + */ +static int sh7760fb_set_par(struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + struct fb_videomode *vm = par->pd->def_mode; + unsigned long sbase, dstn_off, ldsarl, stride; + unsigned short hsynp, hsynw, htcn, hdcn; + unsigned short vsynp, vsynw, vtln, vdln; + unsigned short lddfr, ldmtr; + int ret, bpp, gray; + + par->rot = par->pd->rotate; + + /* rotate only works with xres <= 320 */ + if (par->rot && (vm->xres > 320)) { + dev_dbg(info->dev, "rotation disabled due to display size\n"); + par->rot = 0; + } + + /* calculate LCDC reg vals from display parameters */ + hsynp = vm->right_margin + vm->xres; + hsynw = vm->hsync_len; + htcn = vm->left_margin + hsynp + hsynw; + hdcn = vm->xres; + vsynp = vm->lower_margin + vm->yres; + vsynw = vm->vsync_len; + vtln = vm->upper_margin + vsynp + vsynw; + vdln = vm->yres; + + /* get color info from register value */ + ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, &gray); + if (ret) + return ret; + + dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn, + vdln, bpp, gray ? "grayscale" : "color", + par->rot ? "rotated" : "normal"); + +#ifdef CONFIG_CPU_LITTLE_ENDIAN + lddfr = par->pd->lddfr | (1 << 8); +#else + lddfr = par->pd->lddfr & ~(1 << 8); +#endif + + ldmtr = par->pd->ldmtr; + + if (!(vm->sync & FB_SYNC_HOR_HIGH_ACT)) + ldmtr |= LDMTR_CL1POL; + if (!(vm->sync & FB_SYNC_VERT_HIGH_ACT)) + ldmtr |= LDMTR_FLMPOL; + + /* shut down LCDC before changing display parameters */ + sh7760fb_blank(FB_BLANK_POWERDOWN, info); + + iowrite16(par->pd->ldickr, par->base + LDICKR); /* pixclock */ + iowrite16(ldmtr, par->base + LDMTR); /* polarities */ + iowrite16(lddfr, par->base + LDDFR); /* color/depth */ + iowrite16((par->rot ? 1 << 13 : 0), par->base + LDSMR); /* rotate */ + iowrite16(par->pd->ldpmmr, par->base + LDPMMR); /* Power Management */ + iowrite16(par->pd->ldpspr, par->base + LDPSPR); /* Power Supply Ctrl */ + + /* display resolution */ + iowrite16(((htcn >> 3) - 1) | (((hdcn >> 3) - 1) << 8), + par->base + LDHCNR); + iowrite16(vdln - 1, par->base + LDVDLNR); + iowrite16(vtln - 1, par->base + LDVTLNR); + /* h/v sync signals */ + iowrite16((vsynp - 1) | ((vsynw - 1) << 12), par->base + LDVSYNR); + iowrite16(((hsynp >> 3) - 1) | (((hsynw >> 3) - 1) << 12), + par->base + LDHSYNR); + /* AC modulation sig */ + iowrite16(par->pd->ldaclnr, par->base + LDACLNR); + + stride = (par->rot) ? vtln : hdcn; + if (!gray) + stride *= (bpp + 7) >> 3; + else { + if (bpp == 1) + stride >>= 3; + else if (bpp == 2) + stride >>= 2; + else if (bpp == 4) + stride >>= 1; + /* 6 bpp == 8 bpp */ + } + + /* if rotated, stride must be power of 2 */ + if (par->rot) { + unsigned long bit = 1 << 31; + while (bit) { + if (stride & bit) + break; + bit >>= 1; + } + if (stride & ~bit) + stride = bit << 1; /* not P-o-2, round up */ + } + iowrite16(stride, par->base + LDLAOR); + + /* set display mem start address */ + sbase = (unsigned long)par->fbdma; + if (par->rot) + sbase += (hdcn - 1) * stride; + + iowrite32(sbase, par->base + LDSARU); + + /* + * for DSTN need to set address for lower half. + * I (mlau) don't know which address to set it to, + * so I guessed at (stride * yres/2). + */ + if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) && + ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) { + + dev_dbg(info->dev, " ***** DSTN untested! *****\n"); + + dstn_off = stride; + if (par->rot) + dstn_off *= hdcn >> 1; + else + dstn_off *= vdln >> 1; + + ldsarl = sbase + dstn_off; + } else + ldsarl = 0; + + iowrite32(ldsarl, par->base + LDSARL); /* mem for lower half of DSTN */ + + encode_fix(&info->fix, info, stride); + sh7760fb_check_var(&info->var, info); + + sh7760fb_blank(FB_BLANK_UNBLANK, info); /* panel on! */ + + dev_dbg(info->dev, "hdcn : %6d htcn : %6d\n", hdcn, htcn); + dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp); + dev_dbg(info->dev, "vdln : %6d vtln : %6d\n", vdln, vtln); + dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp); + dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n", + (par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f); + dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr, + par->pd->ldpspr); + dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr); + dev_dbg(info->dev, "ldlaor: %ld\n", stride); + dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl); + + return 0; +} + +static struct fb_ops sh7760fb_ops = { + .owner = THIS_MODULE, + .fb_blank = sh7760fb_blank, + .fb_check_var = sh7760fb_check_var, + .fb_setcmap = sh7760fb_setcmap, + .fb_set_par = sh7760fb_set_par, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static void sh7760fb_free_mem(struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + + if (!info->screen_base) + return; + + dma_free_coherent(info->dev, info->screen_size, + info->screen_base, par->fbdma); + + par->fbdma = 0; + info->screen_base = NULL; + info->screen_size = 0; +} + +/* allocate the framebuffer memory. This memory must be in Area3, + * (dictated by the DMA engine) and contiguous, at a 512 byte boundary. + */ +static int sh7760fb_alloc_mem(struct fb_info *info) +{ + struct sh7760fb_par *par = info->par; + void *fbmem; + unsigned long vram; + int ret, bpp; + + if (info->screen_base) + return 0; + + /* get color info from register value */ + ret = sh7760fb_get_color_info(info->dev, par->pd->lddfr, &bpp, NULL); + if (ret) { + printk(KERN_ERR "colinfo\n"); + return ret; + } + + /* min VRAM: xres_min = 16, yres_min = 1, bpp = 1: 2byte -> 1 page + max VRAM: xres_max = 1024, yres_max = 1024, bpp = 16: 2MB */ + + vram = info->var.xres * info->var.yres; + if (info->var.grayscale) { + if (bpp == 1) + vram >>= 3; + else if (bpp == 2) + vram >>= 2; + else if (bpp == 4) + vram >>= 1; + } else if (bpp > 8) + vram *= 2; + if ((vram < 1) || (vram > 1024 * 2048)) { + dev_dbg(info->dev, "too much VRAM required. Check settings\n"); + return -ENODEV; + } + + if (vram < PAGE_SIZE) + vram = PAGE_SIZE; + + fbmem = dma_alloc_coherent(info->dev, vram, &par->fbdma, GFP_KERNEL); + + if (!fbmem) + return -ENOMEM; + + if ((par->fbdma & SH7760FB_DMA_MASK) != SH7760FB_DMA_MASK) { + sh7760fb_free_mem(info); + dev_err(info->dev, "kernel gave me memory at 0x%08lx, which is" + "unusable for the LCDC\n", (unsigned long)par->fbdma); + return -ENOMEM; + } + + info->screen_base = fbmem; + info->screen_size = vram; + + return 0; +} + +static int __devinit sh7760fb_probe(struct platform_device *pdev) +{ + struct fb_info *info; + struct resource *res; + struct sh7760fb_par *par; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + info = framebuffer_alloc(sizeof(struct sh7760fb_par), &pdev->dev); + if (!info) + return -ENOMEM; + + par = info->par; + par->dev = pdev; + + par->pd = pdev->dev.platform_data; + if (!par->pd) { + dev_dbg(info->dev, "no display setup data!\n"); + ret = -ENODEV; + goto out_fb; + } + + par->ioarea = request_mem_region(res->start, + (res->end - res->start), pdev->name); + if (!par->ioarea) { + dev_err(&pdev->dev, "mmio area busy\n"); + ret = -EBUSY; + goto out_fb; + } + + par->base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!par->base) { + dev_err(&pdev->dev, "cannot remap\n"); + ret = -ENODEV; + goto out_res; + } + + iowrite16(0, par->base + LDINTR); /* disable vsync irq */ + par->irq = platform_get_irq(pdev, 0); + if (par->irq >= 0) { + ret = request_irq(par->irq, sh7760fb_irq, 0, + "sh7760-lcdc", &par->vsync); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + par->irq = -ENXIO; + } else + disable_irq_nosync(par->irq); + } + + fb_videomode_to_var(&info->var, par->pd->def_mode); + + ret = sh7760fb_alloc_mem(info); + if (ret) { + dev_dbg(info->dev, "framebuffer memory allocation failed!\n"); + goto out_unmap; + } + + info->pseudo_palette = par->pseudo_palette; + + /* fixup color register bitpositions. These are fixed by hardware */ + info->var.red.offset = 11; + info->var.red.length = 5; + info->var.red.msb_right = 0; + + info->var.green.offset = 5; + info->var.green.length = 6; + info->var.green.msb_right = 0; + + info->var.blue.offset = 0; + info->var.blue.length = 5; + info->var.blue.msb_right = 0; + + info->var.transp.offset = 0; + info->var.transp.length = 0; + info->var.transp.msb_right = 0; + + /* set the DON2 bit now, before cmap allocation, as it will randomize + * palette memory. + */ + iowrite16(LDCNTR_DON2, par->base + LDCNTR); + info->fbops = &sh7760fb_ops; + + ret = fb_alloc_cmap(&info->cmap, 256, 0); + if (ret) { + dev_dbg(info->dev, "Unable to allocate cmap memory\n"); + goto out_mem; + } + + ret = register_framebuffer(info); + if (ret < 0) { + dev_dbg(info->dev, "cannot register fb!\n"); + goto out_cmap; + } + platform_set_drvdata(pdev, info); + + printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n", + pdev->name, + (unsigned long)par->fbdma, + (unsigned long)(par->fbdma + info->screen_size - 1), + info->screen_size >> 10); + + return 0; + +out_cmap: + sh7760fb_blank(FB_BLANK_POWERDOWN, info); + fb_dealloc_cmap(&info->cmap); +out_mem: + sh7760fb_free_mem(info); +out_unmap: + if (par->irq >= 0) + free_irq(par->irq, &par->vsync); + iounmap(par->base); +out_res: + release_resource(par->ioarea); + kfree(par->ioarea); +out_fb: + framebuffer_release(info); + return ret; +} + +static int __devexit sh7760fb_remove(struct platform_device *dev) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct sh7760fb_par *par = info->par; + + sh7760fb_blank(FB_BLANK_POWERDOWN, info); + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + sh7760fb_free_mem(info); + if (par->irq >= 0) + free_irq(par->irq, par); + iounmap(par->base); + release_resource(par->ioarea); + kfree(par->ioarea); + framebuffer_release(info); + platform_set_drvdata(dev, NULL); + + return 0; +} + +static struct platform_driver sh7760_lcdc_driver = { + .driver = { + .name = "sh7760-lcdc", + .owner = THIS_MODULE, + }, + .probe = sh7760fb_probe, + .remove = __devexit_p(sh7760fb_remove), +}; + +static int __init sh7760fb_init(void) +{ + return platform_driver_register(&sh7760_lcdc_driver); +} + +static void __exit sh7760fb_exit(void) +{ + platform_driver_unregister(&sh7760_lcdc_driver); +} + +module_init(sh7760fb_init); +module_exit(sh7760fb_exit); + +MODULE_AUTHOR("Nobuhiro Iwamatsu, Manuel Lauss"); +MODULE_DESCRIPTION("FBdev for SH7760/63 integrated LCD Controller"); +MODULE_LICENSE("GPL"); diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h new file mode 100644 index 000000000000..8767f61aceca --- /dev/null +++ b/include/asm-sh/sh7760fb.h @@ -0,0 +1,197 @@ +/* + * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss <mano@roarinelk.homelinux.net> + * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + */ + +#ifndef _ASM_SH_SH7760FB_H +#define _ASM_SH_SH7760FB_H + +/* + * some bits of the colormap registers should be written as zero. + * create a mask for that. + */ +#define SH7760FB_PALETTE_MASK 0x00f8fcf8 + +/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ +#define SH7760FB_DMA_MASK 0x0C000000 + +/* palette */ +#define LDPR(x) (((x) << 2)) + +/* framebuffer registers and bits */ +#define LDICKR 0x400 +#define LDMTR 0x402 +/* see sh7760fb.h for LDMTR bits */ +#define LDDFR 0x404 +#define LDDFR_PABD (1 << 8) +#define LDDFR_COLOR_MASK 0x7F +#define LDSMR 0x406 +#define LDSMR_ROT (1 << 13) +#define LDSARU 0x408 +#define LDSARL 0x40c +#define LDLAOR 0x410 +#define LDPALCR 0x412 +#define LDPALCR_PALS (1 << 4) +#define LDPALCR_PALEN (1 << 0) +#define LDHCNR 0x414 +#define LDHSYNR 0x416 +#define LDVDLNR 0x418 +#define LDVTLNR 0x41a +#define LDVSYNR 0x41c +#define LDACLNR 0x41e +#define LDINTR 0x420 +#define LDPMMR 0x424 +#define LDPSPR 0x426 +#define LDCNTR 0x428 +#define LDCNTR_DON (1 << 0) +#define LDCNTR_DON2 (1 << 4) + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define LDLIRNR 0x440 +/* LDINTR bit */ +# define LDINTR_MINTEN (1 << 15) +# define LDINTR_FINTEN (1 << 14) +# define LDINTR_VSINTEN (1 << 13) +# define LDINTR_VEINTEN (1 << 12) +# define LDINTR_MINTS (1 << 11) +# define LDINTR_FINTS (1 << 10) +# define LDINTR_VSINTS (1 << 9) +# define LDINTR_VEINTS (1 << 8) +# define VINT_START (LDINTR_VSINTEN) +# define VINT_CHECK (LDINTR_VSINTS) +#else +/* LDINTR bit */ +# define LDINTR_VINTSEL (1 << 12) +# define LDINTR_VINTE (1 << 8) +# define LDINTR_VINTS (1 << 0) +# define VINT_START (LDINTR_VINTSEL) +# define VINT_CHECK (LDINTR_VINTS) +#endif + +/* HSYNC polarity inversion */ +#define LDMTR_FLMPOL (1 << 15) + +/* VSYNC polarity inversion */ +#define LDMTR_CL1POL (1 << 14) + +/* DISPLAY-ENABLE polarity inversion */ +#define LDMTR_DISPEN_LOWACT (1 << 13) + +/* DISPLAY DATA BUS polarity inversion */ +#define LDMTR_DPOL_LOWACT (1 << 12) + +/* AC modulation signal enable */ +#define LDMTR_MCNT (1 << 10) + +/* Disable output of HSYNC during VSYNC period */ +#define LDMTR_CL1CNT (1 << 9) + +/* Disable output of VSYNC during VSYNC period */ +#define LDMTR_CL2CNT (1 << 8) + +/* Display types supported by the LCDC */ +#define LDMTR_STN_MONO_4 0x00 +#define LDMTR_STN_MONO_8 0x01 +#define LDMTR_STN_COLOR_4 0x08 +#define LDMTR_STN_COLOR_8 0x09 +#define LDMTR_STN_COLOR_12 0x0A +#define LDMTR_STN_COLOR_16 0x0B +#define LDMTR_DSTN_MONO_8 0x11 +#define LDMTR_DSTN_MONO_16 0x13 +#define LDMTR_DSTN_COLOR_8 0x19 +#define LDMTR_DSTN_COLOR_12 0x1A +#define LDMTR_DSTN_COLOR_16 0x1B +#define LDMTR_TFT_COLOR_16 0x2B + +/* framebuffer color layout */ +#define LDDFR_1BPP_MONO 0x00 +#define LDDFR_2BPP_MONO 0x01 +#define LDDFR_4BPP_MONO 0x02 +#define LDDFR_6BPP_MONO 0x04 +#define LDDFR_4BPP 0x0A +#define LDDFR_8BPP 0x0C +#define LDDFR_16BPP_RGB555 0x1D +#define LDDFR_16BPP_RGB565 0x2D + +/* LCDC Pixclock sources */ +#define LCDC_CLKSRC_BUSCLOCK 0 +#define LCDC_CLKSRC_PERIPHERAL 1 +#define LCDC_CLKSRC_EXTERNAL 2 + +#define LDICKR_CLKSRC(x) \ + (((x) & 3) << 12) + +/* LCDC pixclock input divider. Set to 1 at a minimum! */ +#define LDICKR_CLKDIV(x) \ + ((x) & 0x1f) + +struct sh7760fb_platdata { + + /* Set this member to a valid fb_videmode for the display you + * wish to use. The following members must be initialized: + * xres, yres, hsync_len, vsync_len, sync, + * {left,right,upper,lower}_margin. + * The driver uses the above members to calculate register values + * and memory requirements. Other members are ignored but may + * be used by other framebuffer layer components. + */ + struct fb_videomode *def_mode; + + /* LDMTR includes display type and signal polarity. The + * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo + * data above; however the polarities of the following signals + * must be encoded in the ldmtr member: + * Display Enable signal (default high-active) DISPEN_LOWACT + * Display Data signals (default high-active) DPOL_LOWACT + * AC Modulation signal (default off) MCNT + * Hsync-During-Vsync suppression (default off) CL1CNT + * Vsync-during-vsync suppression (default off) CL2CNT + * NOTE: also set a display type! + * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) + */ + u16 ldmtr; + + /* LDDFR controls framebuffer image format (depth, organization) + * Use ONE of the LDDFR_?BPP_* macros! + */ + u16 lddfr; + + /* LDPMMR and LDPSPR control the timing of the power signals + * for the display. Please read the SH7760 Hardware Manual, + * Chapters 30.3.17, 30.3.18 and 30.4.6! + */ + u16 ldpmmr; + u16 ldpspr; + + /* LDACLNR contains the line numbers after which the AC modulation + * signal is to toggle. Set to ZERO for TFTs or displays which + * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). + */ + u16 ldaclnr; + + /* LDICKR contains information on pixelclock source and config. + * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. + * minimal value for CLKDIV() must be 1!. + */ + u16 ldickr; + + /* set this member to 1 if you wish to use the LCDC's hardware + * rotation function. This is limited to displays <= 320x200 + * pixels resolution! + */ + int rotate; /* set to 1 to rotate 90 CCW */ + + /* set this to 1 to suppress vsync irq use. */ + int novsync; + + /* blanking hook for platform. Set this if your platform can do + * more than the LCDC in terms of blanking (e.g. disable clock + * generator / backlight power supply / etc. + */ + void (*blank) (int); +}; + +#endif /* _ASM_SH_SH7760FB_H */ |