Documentation/oops-tracing.txt: convert to ReST markup

- Add a document title;
- use .. note:: markup;
- use quote blocks where needed;
- use monotonic fonts for config options and file names;
- adjust whitespaces and blank lines;
- replace _foo_ by **foo**;
- while here, remove whitespaces at the end of paragraph;
- add it to the user's book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 138 insertions, 117 deletions

diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index f3ac05cc23e4..3e25ea7349ee 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -1,7 +1,13 @@
-NOTE: ksymoops is useless on 2.6.  Please use the Oops in its original format
-(from dmesg, etc).  Ignore any references in this or other docs to "decoding
-the Oops" or "running it through ksymoops".  If you post an Oops from 2.6 that
-has been run through ksymoops, people will just tell you to repost it.
+OOPS tracing
+============
+
+.. note::
+
+  ``ksymoops`` is useless on 2.6 or upper.  Please use the Oops in its original
+  format (from ``dmesg``, etc).  Ignore any references in this or other docs to
+  "decoding the Oops" or "running it through ksymoops".
+  If you post an Oops from 2.6+ that has been run through ``ksymoops``,
+  people will just tell you to repost it.
 
 Quick Summary
 -------------
@@ -12,7 +18,7 @@ If you are unsure send it to the person responsible for the code relevant to
 what you were doing.  If it occurs repeatably try and describe how to recreate
 it.  That's worth even more than the oops.
 
-If you are totally stumped as to whom to send the report, send it to 
+If you are totally stumped as to whom to send the report, send it to
 linux-kernel@vger.kernel.org. Thanks for your help in making Linux as
 stable as humanly possible.
 
@@ -20,24 +26,25 @@ Where is the Oops?
 ----------------------
 
 Normally the Oops text is read from the kernel buffers by klogd and
-handed to syslogd which writes it to a syslog file, typically
-/var/log/messages (depends on /etc/syslog.conf).  Sometimes klogd dies,
-in which case you can run dmesg > file to read the data from the kernel
-buffers and save it.  Or you can cat /proc/kmsg > file, however you
-have to break in to stop the transfer, kmsg is a "never ending file".
+handed to ``syslogd`` which writes it to a syslog file, typically
+``/var/log/messages`` (depends on ``/etc/syslog.conf``).  Sometimes ``klogd``
+dies, in which case you can run ``dmesg > file`` to read the data from the
+kernel buffers and save it.  Or you can ``cat /proc/kmsg > file``, however you
+have to break in to stop the transfer, ``kmsg`` is a "never ending file".
 If the machine has crashed so badly that you cannot enter commands or
-the disk is not available then you have three options :-
+the disk is not available then you have three options :
 
 (1) Hand copy the text from the screen and type it in after the machine
     has restarted.  Messy but it is the only option if you have not
     planned for a crash. Alternatively, you can take a picture of
     the screen with a digital camera - not nice, but better than
     nothing.  If the messages scroll off the top of the console, you
-    may find that booting with a higher resolution (eg, vga=791)
-    will allow you to read more of the text. (Caveat: This needs vesafb,
+    may find that booting with a higher resolution (eg, ``vga=791``)
+    will allow you to read more of the text. (Caveat: This needs ``vesafb``,
     so won't help for 'early' oopses)
 
-(2) Boot with a serial console (see Documentation/serial-console.txt),
+(2) Boot with a serial console (see
+    :ref:`Documentation/serial-console.txt <serial_console>`),
     run a null modem to a second machine and capture the output there
     using your favourite communication program.  Minicom works well.
 
@@ -49,117 +56,126 @@ the disk is not available then you have three options :-
 Full Information
 ----------------
 
-NOTE: the message from Linus below applies to 2.4 kernel.  I have preserved it
-for historical reasons, and because some of the information in it still
-applies.  Especially, please ignore any references to ksymoops. 
+.. note::
+
+  the message from Linus below applies to 2.4 kernel.  I have preserved it
+  for historical reasons, and because some of the information in it still
+  applies.  Especially, please ignore any references to ksymoops.
 
-From: Linus Torvalds <torvalds@osdl.org>
+  ::
 
-How to track down an Oops.. [originally a mail to linux-kernel]
+	From: Linus Torvalds <torvalds@osdl.org>
 
-The main trick is having 5 years of experience with those pesky oops 
-messages ;-)
+	How to track down an Oops.. [originally a mail to linux-kernel]
 
-Actually, there are things you can do that make this easier. I have two 
-separate approaches:
+	The main trick is having 5 years of experience with those pesky oops
+	messages ;-)
+
+Actually, there are things you can do that make this easier. I have two
+separate approaches::
 
 	gdb /usr/src/linux/vmlinux
 	gdb> disassemble <offending_function>
 
-That's the easy way to find the problem, at least if the bug-report is 
-well made (like this one was - run through ksymoops to get the 
-information of which function and the offset in the function that it 
+That's the easy way to find the problem, at least if the bug-report is
+well made (like this one was - run through ``ksymoops`` to get the
+information of which function and the offset in the function that it
 happened in).
 
-Oh, it helps if the report happens on a kernel that is compiled with the 
+Oh, it helps if the report happens on a kernel that is compiled with the
 same compiler and similar setups.
 
-The other thing to do is disassemble the "Code:" part of the bug report: 
+The other thing to do is disassemble the "Code:" part of the bug report:
 ksymoops will do this too with the correct tools, but if you don't have
-the tools you can just do a silly program:
+the tools you can just do a silly program::
 
 	char str[] = "\xXX\xXX\xXX...";
 	main(){}
 
-and compile it with gcc -g and then do "disassemble str" (where the "XX" 
-stuff are the values reported by the Oops - you can just cut-and-paste 
-and do a replace of spaces to "\x" - that's what I do, as I'm too lazy 
+and compile it with ``gcc -g`` and then do ``disassemble str`` (where the ``XX``
+stuff are the values reported by the Oops - you can just cut-and-paste
+and do a replace of spaces to ``\x`` - that's what I do, as I'm too lazy
 to write a program to automate this all).
 
-Alternatively, you can use the shell script in scripts/decodecode.
-Its usage is:  decodecode < oops.txt
+Alternatively, you can use the shell script in ``scripts/decodecode``.
+Its usage is::
+
+	decodecode < oops.txt
 
 The hex bytes that follow "Code:" may (in some architectures) have a series
 of bytes that precede the current instruction pointer as well as bytes at and
 following the current instruction pointer.  In some cases, one instruction
-byte or word is surrounded by <> or (), as in "<86>" or "(f00d)".  These
-<> or () markings indicate the current instruction pointer.  Example from
-i386, split into multiple lines for readability:
+byte or word is surrounded by ``<>`` or ``()``, as in ``<86>`` or ``(f00d)``.
+These ``<>`` or ``()`` markings indicate the current instruction pointer.
+
+Example from i386, split into multiple lines for readability::
 
-Code: f9 0f 8d f9 00 00 00 8d 42 0c e8 dd 26 11 c7 a1 60 ea 2b f9 8b 50 08 a1
-64 ea 2b f9 8d 34 82 8b 1e 85 db 74 6d 8b 15 60 ea 2b f9 <8b> 43 04 39 42 54
-7e 04 40 89 42 54 8b 43 04 3b 05 00 f6 52 c0
+	Code: f9 0f 8d f9 00 00 00 8d 42 0c e8 dd 26 11 c7 a1 60 ea 2b f9 8b 50 08 a1
+	64 ea 2b f9 8d 34 82 8b 1e 85 db 74 6d 8b 15 60 ea 2b f9 <8b> 43 04 39 42 54
+	7e 04 40 89 42 54 8b 43 04 3b 05 00 f6 52 c0
 
-Finally, if you want to see where the code comes from, you can do
+Finally, if you want to see where the code comes from, you can do::
 
 	cd /usr/src/linux
 	make fs/buffer.s 	# or whatever file the bug happened in
 
-and then you get a better idea of what happens than with the gdb 
+and then you get a better idea of what happens than with the gdb
 disassembly.
 
-Now, the trick is just then to combine all the data you have: the C 
-sources (and general knowledge of what it _should_ do), the assembly 
-listing and the code disassembly (and additionally the register dump you 
-also get from the "oops" message - that can be useful to see _what_ the 
-corrupted pointers were, and when you have the assembler listing you can 
-also match the other registers to whatever C expressions they were used 
+Now, the trick is just then to combine all the data you have: the C
+sources (and general knowledge of what it **should** do), the assembly
+listing and the code disassembly (and additionally the register dump you
+also get from the "oops" message - that can be useful to see **what** the
+corrupted pointers were, and when you have the assembler listing you can
+also match the other registers to whatever C expressions they were used
 for).
 
-Essentially, you just look at what doesn't match (in this case it was the 
-"Code" disassembly that didn't match with what the compiler generated). 
-Then you need to find out _why_ they don't match. Often it's simple - you 
-see that the code uses a NULL pointer and then you look at the code and 
-wonder how the NULL pointer got there, and if it's a valid thing to do 
+Essentially, you just look at what doesn't match (in this case it was the
+"Code" disassembly that didn't match with what the compiler generated).
+Then you need to find out **why** they don't match. Often it's simple - you
+see that the code uses a NULL pointer and then you look at the code and
+wonder how the NULL pointer got there, and if it's a valid thing to do
 you just check against it..
 
-Now, if somebody gets the idea that this is time-consuming and requires 
-some small amount of concentration, you're right. Which is why I will 
-mostly just ignore any panic reports that don't have the symbol table 
-info etc looked up: it simply gets too hard to look it up (I have some 
-programs to search for specific patterns in the kernel code segment, and 
-sometimes I have been able to look up those kinds of panics too, but 
-that really requires pretty good knowledge of the kernel just to be able 
+Now, if somebody gets the idea that this is time-consuming and requires
+some small amount of concentration, you're right. Which is why I will
+mostly just ignore any panic reports that don't have the symbol table
+info etc looked up: it simply gets too hard to look it up (I have some
+programs to search for specific patterns in the kernel code segment, and
+sometimes I have been able to look up those kinds of panics too, but
+that really requires pretty good knowledge of the kernel just to be able
 to pick out the right sequences etc..)
 
-_Sometimes_ it happens that I just see the disassembled code sequence 
-from the panic, and I know immediately where it's coming from. That's when 
+**Sometimes** it happens that I just see the disassembled code sequence
+from the panic, and I know immediately where it's coming from. That's when
 I get worried that I've been doing this for too long ;-)
 
 		Linus
 
 
 ---------------------------------------------------------------------------
-Notes on Oops tracing with klogd:
+
+Notes on Oops tracing with ``klogd``
+------------------------------------
 
 In order to help Linus and the other kernel developers there has been
-substantial support incorporated into klogd for processing protection
+substantial support incorporated into ``klogd`` for processing protection
 faults.  In order to have full support for address resolution at least
-version 1.3-pl3 of the sysklogd package should be used.
+version 1.3-pl3 of the ``sysklogd`` package should be used.
 
-When a protection fault occurs the klogd daemon automatically
+When a protection fault occurs the ``klogd`` daemon automatically
 translates important addresses in the kernel log messages to their
 symbolic equivalents.  This translated kernel message is then
-forwarded through whatever reporting mechanism klogd is using.  The
+forwarded through whatever reporting mechanism ``klogd`` is using.  The
 protection fault message can be simply cut out of the message files
 and forwarded to the kernel developers.
 
-Two types of address resolution are performed by klogd.  The first is
+Two types of address resolution are performed by ``klogd``.  The first is
 static translation and the second is dynamic translation.  Static
 translation uses the System.map file in much the same manner that
-ksymoops does.  In order to do static translation the klogd daemon
+ksymoops does.  In order to do static translation the ``klogd`` daemon
 must be able to find a system map file at daemon initialization time.
-See the klogd man page for information on how klogd searches for map
+See the klogd man page for information on how ``klogd`` searches for map
 files.
 
 Dynamic address translation is important when kernel loadable modules
@@ -178,101 +194,106 @@ information available if the developer of the loadable module chose to
 export symbol information from the module.
 
 Since the kernel module environment can be dynamic there must be a
-mechanism for notifying the klogd daemon when a change in module
+mechanism for notifying the ``klogd`` daemon when a change in module
 environment occurs.  There are command line options available which
 allow klogd to signal the currently executing daemon that symbol
-information should be refreshed.  See the klogd manual page for more
+information should be refreshed.  See the ``klogd`` manual page for more
 information.
 
 A patch is included with the sysklogd distribution which modifies the
-modules-2.0.0 package to automatically signal klogd whenever a module
+``modules-2.0.0`` package to automatically signal klogd whenever a module
 is loaded or unloaded.  Applying this patch provides essentially
 seamless support for debugging protection faults which occur with
 kernel loadable modules.
 
 The following is an example of a protection fault in a loadable module
-processed by klogd:
----------------------------------------------------------------------------
-Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc
-Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000
-Aug 29 09:51:01 blizard kernel: *pde = 00000000
-Aug 29 09:51:01 blizard kernel: Oops: 0002
-Aug 29 09:51:01 blizard kernel: CPU:    0
-Aug 29 09:51:01 blizard kernel: EIP:    0010:[oops:_oops+16/3868]
-Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212
-Aug 29 09:51:01 blizard kernel: eax: 315e97cc   ebx: 003a6f80   ecx: 001be77b   edx: 00237c0c
-Aug 29 09:51:01 blizard kernel: esi: 00000000   edi: bffffdb3   ebp: 00589f90   esp: 00589f8c
-Aug 29 09:51:01 blizard kernel: ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
-Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000)
-Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001 
-Aug 29 09:51:01 blizard kernel:        00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00 
-Aug 29 09:51:01 blizard kernel:        bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036 
-Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128] 
-Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3 
+processed by ``klogd``::
+
+	Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc
+	Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000
+	Aug 29 09:51:01 blizard kernel: *pde = 00000000
+	Aug 29 09:51:01 blizard kernel: Oops: 0002
+	Aug 29 09:51:01 blizard kernel: CPU:    0
+	Aug 29 09:51:01 blizard kernel: EIP:    0010:[oops:_oops+16/3868]
+	Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212
+	Aug 29 09:51:01 blizard kernel: eax: 315e97cc   ebx: 003a6f80   ecx: 001be77b   edx: 00237c0c
+	Aug 29 09:51:01 blizard kernel: esi: 00000000   edi: bffffdb3   ebp: 00589f90   esp: 00589f8c
+	Aug 29 09:51:01 blizard kernel: ds: 0018   es: 0018   fs: 002b   gs: 002b   ss: 0018
+	Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000)
+	Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001
+	Aug 29 09:51:01 blizard kernel:        00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00
+	Aug 29 09:51:01 blizard kernel:        bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036
+	Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128]
+	Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3
+
 ---------------------------------------------------------------------------
 
-Dr. G.W. Wettstein           Oncology Research Div. Computing Facility
-Roger Maris Cancer Center    INTERNET: greg@wind.rmcc.com
-820 4th St. N.
-Fargo, ND  58122
-Phone: 701-234-7556
+::
+
+  Dr. G.W. Wettstein           Oncology Research Div. Computing Facility
+  Roger Maris Cancer Center    INTERNET: greg@wind.rmcc.com
+  820 4th St. N.
+  Fargo, ND  58122
+  Phone: 701-234-7556
 
 
 ---------------------------------------------------------------------------
-Tainted kernels:
 
-Some oops reports contain the string 'Tainted: ' after the program
+Tainted kernels
+---------------
+
+Some oops reports contain the string **'Tainted: '** after the program
 counter. This indicates that the kernel has been tainted by some
 mechanism.  The string is followed by a series of position-sensitive
 characters, each representing a particular tainted value.
 
-  1: 'G' if all modules loaded have a GPL or compatible license, 'P' if
+  1) 'G' if all modules loaded have a GPL or compatible license, 'P' if
      any proprietary module has been loaded.  Modules without a
      MODULE_LICENSE or with a MODULE_LICENSE that is not recognised by
      insmod as GPL compatible are assumed to be proprietary.
 
-  2: 'F' if any module was force loaded by "insmod -f", ' ' if all
+  2) ``F`` if any module was force loaded by ``insmod -f``, ``' '`` if all
      modules were loaded normally.
 
-  3: 'S' if the oops occurred on an SMP kernel running on hardware that
+  3) ``S`` if the oops occurred on an SMP kernel running on hardware that
      hasn't been certified as safe to run multiprocessor.
      Currently this occurs only on various Athlons that are not
      SMP capable.
 
-  4: 'R' if a module was force unloaded by "rmmod -f", ' ' if all
+  4) ``R`` if a module was force unloaded by ``rmmod -f``, ``' '`` if all
      modules were unloaded normally.
 
-  5: 'M' if any processor has reported a Machine Check Exception,
-     ' ' if no Machine Check Exceptions have occurred.
+  5) ``M`` if any processor has reported a Machine Check Exception,
+     ``' '`` if no Machine Check Exceptions have occurred.
 
-  6: 'B' if a page-release function has found a bad page reference or
+  6) ``B`` if a page-release function has found a bad page reference or
      some unexpected page flags.
 
-  7: 'U' if a user or user application specifically requested that the
-     Tainted flag be set, ' ' otherwise.
+  7) ``U`` if a user or user application specifically requested that the
+     Tainted flag be set, ``' '`` otherwise.
 
-  8: 'D' if the kernel has died recently, i.e. there was an OOPS or BUG.
+  8) ``D`` if the kernel has died recently, i.e. there was an OOPS or BUG.
 
-  9: 'A' if the ACPI table has been overridden.
+  9) ``A`` if the ACPI table has been overridden.
 
- 10: 'W' if a warning has previously been issued by the kernel.
+ 10) ``W`` if a warning has previously been issued by the kernel.
      (Though some warnings may set more specific taint flags.)
 
- 11: 'C' if a staging driver has been loaded.
+ 11) ``C`` if a staging driver has been loaded.
 
- 12: 'I' if the kernel is working around a severe bug in the platform
+ 12) ``I`` if the kernel is working around a severe bug in the platform
      firmware (BIOS or similar).
 
- 13: 'O' if an externally-built ("out-of-tree") module has been loaded.
+ 13) ``O`` if an externally-built ("out-of-tree") module has been loaded.
 
- 14: 'E' if an unsigned module has been loaded in a kernel supporting
+ 14) ``E`` if an unsigned module has been loaded in a kernel supporting
      module signature.
 
- 15: 'L' if a soft lockup has previously occurred on the system.
+ 15) ``L`` if a soft lockup has previously occurred on the system.
 
- 16: 'K' if the kernel has been live patched.
+ 16) ``K`` if the kernel has been live patched.
 
-The primary reason for the 'Tainted: ' string is to tell kernel
+The primary reason for the **'Tainted: '** string is to tell kernel
 debuggers if this is a clean kernel or if anything unusual has
 occurred.  Tainting is permanent: even if an offending module is
 unloaded, the tainted value remains to indicate that the kernel is not