diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2021-04-22 11:19:49 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2021-04-22 11:19:49 +0200 |
commit | 7e25c20df40c88958dde73d79ba99e94ad99573e (patch) | |
tree | 55bb96c55bbacfc61958bd480c5c09400165cf30 | |
parent | 3232a3ce55edfc0d7f8904543b4088a5339c2b2b (diff) | |
parent | 039b81d50a4822edfc07a7c2e6963823e993b2f0 (diff) | |
download | linux-stable-7e25c20df40c88958dde73d79ba99e94ad99573e.tar.gz linux-stable-7e25c20df40c88958dde73d79ba99e94ad99573e.tar.bz2 linux-stable-7e25c20df40c88958dde73d79ba99e94ad99573e.zip |
Merge tag 'usb-serial-5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.13-rc1
Here are the USB-serial updates for 5.13-rc1, including:
- better type detection for pl2303
- support for more line speeds for pl2303 (TA/TB)
- fixed CSIZE handling for the new xr driver
- core support for multi-interface functions
- TIOCGSERIAL and TIOCSSERIAL fixes
- generic TIOCSSERIAL support (e.g. for closing_wait)
- fixed return value for unsupported ioctls
- support for gpio valid masks in cp210x
- drain-delay fixes and improvements
- support for multi-port devices for xr
- generalisation of the xr driver to support three new device classes
(XR21B142X, XR21B1411 and XR2280X)
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (72 commits)
USB: cdc-acm: add more Maxlinear/Exar models to ignore list
USB: serial: xr: add copyright notice
USB: serial: xr: reset FIFOs on open
USB: serial: xr: add support for XR22801, XR22802, XR22804
USB: serial: xr: add support for XR21B1411
USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424
USB: serial: xr: add type abstraction
USB: serial: xr: drop type prefix from shared defines
USB: serial: xr: move pin configuration to probe
USB: serial: xr: rename GPIO-pin defines
USB: serial: xr: rename GPIO-mode defines
USB: serial: xr: add support for XR21V1412 and XR21V1414
USB: serial: ti_usb_3410_5052: clean up termios CSIZE handling
USB: serial: ti_usb_3410_5052: use kernel types consistently
USB: serial: ti_usb_3410_5052: add port-command helpers
USB: serial: ti_usb_3410_5052: clean up vendor-request helpers
USB: serial: ti_usb_3410_5052: drop unnecessary packed attributes
USB: serial: io_ti: drop unnecessary packed attributes
USB: serial: io_ti: use kernel types consistently
USB: serial: io_ti: add read-port-command helper
...
28 files changed, 1158 insertions, 922 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index c103961c3fae..ca7a61190dd9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1913,9 +1913,17 @@ static const struct usb_device_id acm_ids[] = { #endif #if IS_ENABLED(CONFIG_USB_SERIAL_XR) - { USB_DEVICE(0x04e2, 0x1410), /* Ignore XR21V141X USB to Serial converter */ - .driver_info = IGNORE_DEVICE, - }, + { USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE }, #endif /*Samsung phone in firmware update mode */ diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index b9bedfe9bd09..5dd710e9fe7d 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -385,18 +385,6 @@ err_free: return result; } -static int ark3116_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - ss->type = PORT_16654; - ss->line = port->minor; - ss->port = port->port_number; - ss->baud_base = 460800; - return 0; -} - static int ark3116_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -633,7 +621,6 @@ static struct usb_serial_driver ark3116_device = { .port_probe = ark3116_port_probe, .port_remove = ark3116_port_remove, .set_termios = ark3116_set_termios, - .get_serial = ark3116_get_serial_info, .tiocmget = ark3116_tiocmget, .tiocmset = ark3116_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index a373cd63b3a4..ee595d1bea0a 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -1410,17 +1410,6 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state) } #ifdef CONFIG_GPIOLIB -static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset) -{ - struct usb_serial *serial = gpiochip_get_data(gc); - struct cp210x_serial_private *priv = usb_get_serial_data(serial); - - if (priv->gpio_altfunc & BIT(offset)) - return -ENODEV; - - return 0; -} - static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio) { struct usb_serial *serial = gpiochip_get_data(gc); @@ -1549,6 +1538,24 @@ static int cp210x_gpio_set_config(struct gpio_chip *gc, unsigned int gpio, return -ENOTSUPP; } +static int cp210x_gpio_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, unsigned int ngpios) +{ + struct usb_serial *serial = gpiochip_get_data(gc); + struct cp210x_serial_private *priv = usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + unsigned long altfunc_mask = priv->gpio_altfunc; + + bitmap_complement(valid_mask, &altfunc_mask, ngpios); + + if (bitmap_empty(valid_mask, ngpios)) + dev_dbg(dev, "no pin configured for GPIO\n"); + else + dev_dbg(dev, "GPIO.%*pbl configured for GPIO\n", ngpios, + valid_mask); + return 0; +} + /* * This function is for configuring GPIO using shared pins, where other signals * are made unavailable by configuring the use of GPIO. This is believed to be @@ -1786,13 +1793,13 @@ static int cp210x_gpio_init(struct usb_serial *serial) return result; priv->gc.label = "cp210x"; - priv->gc.request = cp210x_gpio_request; priv->gc.get_direction = cp210x_gpio_direction_get; priv->gc.direction_input = cp210x_gpio_direction_input; priv->gc.direction_output = cp210x_gpio_direction_output; priv->gc.get = cp210x_gpio_get; priv->gc.set = cp210x_gpio_set; priv->gc.set_config = cp210x_gpio_set_config; + priv->gc.init_valid_mask = cp210x_gpio_init_valid_mask; priv->gc.owner = THIS_MODULE; priv->gc.parent = &serial->interface->dev; priv->gc.base = -1; diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 6a8f39147d8e..a7a7af8d05bf 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -820,17 +820,12 @@ static int f81232_carrier_raised(struct usb_serial_port *port) return 0; } -static int f81232_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) +static void f81232_get_serial(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct f81232_private *priv = usb_get_serial_port_data(port); - ss->type = PORT_16550A; - ss->line = port->minor; - ss->port = port->port_number; ss->baud_base = priv->baud_base; - return 0; } static void f81232_interrupt_work(struct work_struct *work) @@ -953,7 +948,6 @@ static int f81232_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); - port->port.drain_delay = 256; priv->port = port; return 0; @@ -1021,7 +1015,7 @@ static struct usb_serial_driver f81232_device = { .close = f81232_close, .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, - .get_serial = f81232_get_serial_info, + .get_serial = f81232_get_serial, .break_ctl = f81232_break_ctl, .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, @@ -1046,7 +1040,7 @@ static struct usb_serial_driver f81534a_device = { .close = f81232_close, .dtr_rts = f81232_dtr_rts, .carrier_raised = f81232_carrier_raised, - .get_serial = f81232_get_serial_info, + .get_serial = f81232_get_serial, .break_ctl = f81232_break_ctl, .set_termios = f81232_set_termios, .tiocmget = f81232_tiocmget, diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c index a763b362f081..c0bca52ef92a 100644 --- a/drivers/usb/serial/f81534.c +++ b/drivers/usb/serial/f81534.c @@ -1140,19 +1140,14 @@ static void f81534_close(struct usb_serial_port *port) mutex_unlock(&serial_priv->urb_mutex); } -static int f81534_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) +static void f81534_get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct f81534_port_private *port_priv; port_priv = usb_get_serial_port_data(port); - ss->type = PORT_16550A; - ss->port = port->port_number; - ss->line = port->minor; ss->baud_base = port_priv->baud_base; - return 0; } static void f81534_process_per_serial_block(struct usb_serial_port *port, diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c867592477c9..6f2659e59b2e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1082,8 +1082,7 @@ static int ftdi_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); static int ftdi_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg); -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss); +static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss); static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss); static void ftdi_break_ctl(struct tty_struct *tty, int break_state); @@ -1477,8 +1476,7 @@ static int read_latency_timer(struct usb_serial_port *port) return 0; } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) +static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1486,49 +1484,34 @@ static int get_serial_info(struct tty_struct *tty, ss->flags = priv->flags; ss->baud_base = priv->baud_base; ss->custom_divisor = priv->custom_divisor; - return 0; } -static int set_serial_info(struct tty_struct *tty, - struct serial_struct *ss) +static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct ftdi_private *priv = usb_get_serial_port_data(port); - struct ftdi_private old_priv; + int old_flags, old_divisor; mutex_lock(&priv->cfg_lock); - old_priv = *priv; - - /* Do error checking and permission checking */ if (!capable(CAP_SYS_ADMIN)) { if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) { mutex_unlock(&priv->cfg_lock); return -EPERM; } - priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | - (ss->flags & ASYNC_USR_MASK)); - priv->custom_divisor = ss->custom_divisor; - goto check_and_exit; - } - - if (ss->baud_base != priv->baud_base) { - mutex_unlock(&priv->cfg_lock); - return -EINVAL; } - /* Make the changes - these are privileged changes! */ + old_flags = priv->flags; + old_divisor = priv->custom_divisor; - priv->flags = ((priv->flags & ~ASYNC_FLAGS) | - (ss->flags & ASYNC_FLAGS)); + priv->flags = ss->flags & ASYNC_FLAGS; priv->custom_divisor = ss->custom_divisor; -check_and_exit: write_latency_timer(port); - if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || + if ((priv->flags ^ old_flags) & ASYNC_SPD_MASK || ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && - priv->custom_divisor != old_priv.custom_divisor)) { + priv->custom_divisor != old_divisor)) { /* warn about deprecation unless clearing */ if (priv->flags & ASYNC_SPD_MASK) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 68401adcffde..e6fe3882bf69 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -263,39 +263,9 @@ static const struct divisor_table_entry divisor_table[] = { static atomic_t CmdUrbs = ATOMIC_INIT(0); -/* local function prototypes */ +/* function prototypes */ -/* function prototypes for all URB callbacks */ -static void edge_interrupt_callback(struct urb *urb); -static void edge_bulk_in_callback(struct urb *urb); -static void edge_bulk_out_data_callback(struct urb *urb); -static void edge_bulk_out_cmd_callback(struct urb *urb); - -/* function prototypes for the usbserial callbacks */ -static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); static void edge_close(struct usb_serial_port *port); -static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); -static int edge_write_room(struct tty_struct *tty); -static int edge_chars_in_buffer(struct tty_struct *tty); -static void edge_throttle(struct tty_struct *tty); -static void edge_unthrottle(struct tty_struct *tty); -static void edge_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios); -static int edge_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void edge_break(struct tty_struct *tty, int break_state); -static int edge_tiocmget(struct tty_struct *tty); -static int edge_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int edge_startup(struct usb_serial *serial); -static void edge_disconnect(struct usb_serial *serial); -static void edge_release(struct usb_serial *serial); -static int edge_port_probe(struct usb_serial_port *port); -static void edge_port_remove(struct usb_serial_port *port); - -/* function prototypes for all of our local functions */ static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength); @@ -309,8 +279,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, __u8 param); static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); -static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, - int baudRate); static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios); @@ -321,19 +289,8 @@ static int write_cmd_usb(struct edgeport_port *edge_port, static void send_more_port_data(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port); -static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, - __u16 length, const __u8 *data); -static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, - __u16 length, __u8 *data); static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); -static void get_manufacturing_desc(struct edgeport_serial *edge_serial); -static void get_boot_desc(struct edgeport_serial *edge_serial); -static void load_application_firmware(struct edgeport_serial *edge_serial); - -static void unicode_to_ascii(char *string, int buflen, - __le16 *unicode, int unicode_size); - /* ************************************************************************ */ /* ************************************************************************ */ @@ -1637,24 +1594,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - - ss->type = PORT_16550A; - ss->line = edge_port->port->minor; - ss->port = edge_port->port->port_number; - ss->irq = 0; - ss->xmit_fifo_size = edge_port->maxTxCredits; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = 30*HZ; - return 0; -} - - /***************************************************************************** * SerialIoctl * this function handles any ioctl calls to the driver @@ -3116,7 +3055,6 @@ static struct usb_serial_driver edgeport_2port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_serial = get_serial_info, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, .write = edge_write, @@ -3152,7 +3090,6 @@ static struct usb_serial_driver edgeport_4port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_serial = get_serial_info, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, .write = edge_write, @@ -3188,7 +3125,6 @@ static struct usb_serial_driver edgeport_8port_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_serial = get_serial_info, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, .write = edge_write, @@ -3224,7 +3160,6 @@ static struct usb_serial_driver epic_device = { .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, - .get_serial = get_serial_info, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, .write = edge_write, diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index 43ba53a3a6fa..7c9f62af5ed6 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -10,7 +10,6 @@ #if !defined(_IO_EDGEPORT_H_) #define _IO_EDGEPORT_H_ - #define MAX_RS232_PORTS 8 /* Max # of RS-232 ports per device */ /* typedefs that the insideout headers need */ @@ -21,57 +20,8 @@ #define HIGH8(a) ((unsigned char)((a & 0xff00) >> 8)) #endif -#ifndef __KERNEL__ -#define __KERNEL__ -#endif - #include "io_usbvend.h" - - -/* The following table is used to map the USBx port number to - * the device serial number (or physical USB path), */ -#define MAX_EDGEPORTS 64 - -struct comMapper { - char SerialNumber[MAX_SERIALNUMBER_LEN+1]; /* Serial number/usb path */ - int numPorts; /* Number of ports */ - int Original[MAX_RS232_PORTS]; /* Port numbers set by IOCTL */ - int Port[MAX_RS232_PORTS]; /* Actual used port numbers */ -}; - - -#define EDGEPORT_CONFIG_DEVICE "/proc/edgeport" - -/* /proc/edgeport Interface - * This interface uses read/write/lseek interface to talk to the edgeport driver - * the following read functions are supported: */ -#define PROC_GET_MAPPING_TO_PATH 1 -#define PROC_GET_COM_ENTRY 2 -#define PROC_GET_EDGE_MANUF_DESCRIPTOR 3 -#define PROC_GET_BOOT_DESCRIPTOR 4 -#define PROC_GET_PRODUCT_INFO 5 -#define PROC_GET_STRINGS 6 -#define PROC_GET_CURRENT_COM_MAPPING 7 - -/* The parameters to the lseek() for the read is: */ -#define PROC_READ_SETUP(Command, Argument) ((Command) + ((Argument)<<8)) - - -/* the following write functions are supported: */ -#define PROC_SET_COM_MAPPING 1 -#define PROC_SET_COM_ENTRY 2 - - -/* The following structure is passed to the write */ -struct procWrite { - int Command; - union { - struct comMapper Entry; - int ComMappingBasedOnUSBPort; /* Boolean value */ - } u; -}; - /* * Product information read from the Edgeport */ @@ -108,22 +58,4 @@ struct edgeport_product_info { struct edge_compatibility_bits Epic; }; -/* - * Edgeport Stringblock String locations - */ -#define EDGESTRING_MANUFNAME 1 /* Manufacture Name */ -#define EDGESTRING_PRODNAME 2 /* Product Name */ -#define EDGESTRING_SERIALNUM 3 /* Serial Number */ -#define EDGESTRING_ASSEMNUM 4 /* Assembly Number */ -#define EDGESTRING_OEMASSEMNUM 5 /* OEM Assembly Number */ -#define EDGESTRING_MANUFDATE 6 /* Manufacture Date */ -#define EDGESTRING_ORIGSERIALNUM 7 /* Serial Number */ - -struct string_block { - __u16 NumStrings; /* Number of strings in block */ - __u16 Strings[1]; /* Start of string block */ -}; - - - #endif diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index e800547be9e0..39503fdccebf 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -60,14 +60,12 @@ #define EDGE_READ_URB_STOPPING 1 #define EDGE_READ_URB_STOPPED 2 -#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */ - /* Product information read from the Edgeport */ struct product_info { int TiMode; /* Current TI Mode */ - __u8 hardware_type; /* Type of hardware */ -} __attribute__((packed)); + u8 hardware_type; /* Type of hardware */ +} __packed; /* * Edgeport firmware header @@ -89,13 +87,13 @@ struct edgeport_fw_hdr { } __packed; struct edgeport_port { - __u16 uart_base; - __u16 dma_address; - __u8 shadow_msr; - __u8 shadow_mcr; - __u8 shadow_lsr; - __u8 lsr_mask; - __u32 ump_read_timeout; /* + u16 uart_base; + u16 dma_address; + u8 shadow_msr; + u8 shadow_mcr; + u8 shadow_lsr; + u8 lsr_mask; + u32 ump_read_timeout; /* * Number of milliseconds the UMP will * wait without data before completing * a read short @@ -106,7 +104,7 @@ struct edgeport_port { struct edgeport_serial *edge_serial; struct usb_serial_port *port; - __u8 bUartMode; /* Port type, 0: RS232, etc. */ + u8 bUartMode; /* Port type, 0: RS232, etc. */ spinlock_t ep_lock; int ep_read_urb_state; int ep_write_urb_in_use; @@ -211,7 +209,6 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); -static int closing_wait = EDGE_CLOSING_WAIT; static bool ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -255,8 +252,8 @@ static int edge_remove_sysfs_attrs(struct usb_serial_port *port); #define TI_VSEND_TIMEOUT_DEFAULT 1000 #define TI_VSEND_TIMEOUT_FW_DOWNLOAD 10000 -static int ti_vread_sync(struct usb_device *dev, __u8 request, - __u16 value, __u16 index, u8 *data, int size) +static int ti_vread_sync(struct usb_device *dev, u8 request, u16 value, + u16 index, void *data, int size) { int status; @@ -274,7 +271,7 @@ static int ti_vread_sync(struct usb_device *dev, __u8 request, } static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value, - u16 index, u8 *data, int size, int timeout) + u16 index, void *data, int size, int timeout) { int status; @@ -287,27 +284,30 @@ static int ti_vsend_sync(struct usb_device *dev, u8 request, u16 value, return 0; } -static int send_cmd(struct usb_device *dev, __u8 command, - __u8 moduleid, __u16 value, u8 *data, - int size) +static int read_port_cmd(struct usb_serial_port *port, u8 command, u16 value, + void *data, int size) +{ + return ti_vread_sync(port->serial->dev, command, value, + UMPM_UART1_PORT + port->port_number, + data, size); +} + +static int send_port_cmd(struct usb_serial_port *port, u8 command, u16 value, + void *data, int size) { - return ti_vsend_sync(dev, command, value, moduleid, data, size, - TI_VSEND_TIMEOUT_DEFAULT); + return ti_vsend_sync(port->serial->dev, command, value, + UMPM_UART1_PORT + port->port_number, + data, size, TI_VSEND_TIMEOUT_DEFAULT); } /* clear tx/rx buffers and fifo in TI UMP */ -static int purge_port(struct usb_serial_port *port, __u16 mask) +static int purge_port(struct usb_serial_port *port, u16 mask) { int port_number = port->port_number; dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); - return send_cmd(port->serial->dev, - UMPC_PURGE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), - mask, - NULL, - 0); + return send_port_cmd(port, UMPC_PURGE_PORT, mask, NULL, 0); } /** @@ -319,10 +319,10 @@ static int purge_port(struct usb_serial_port *port, __u16 mask) * @buffer: pointer to input data buffer */ static int read_download_mem(struct usb_device *dev, int start_address, - int length, __u8 address_type, __u8 *buffer) + int length, u8 address_type, u8 *buffer) { int status = 0; - __u8 read_length; + u8 read_length; u16 be_start_address; dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); @@ -335,7 +335,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, if (length > 64) read_length = 64; else - read_length = (__u8)length; + read_length = (u8)length; if (read_length > 1) { dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); @@ -346,7 +346,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, */ be_start_address = swab16((u16)start_address); status = ti_vread_sync(dev, UMPC_MEMORY_READ, - (__u16)address_type, + (u16)address_type, be_start_address, buffer, read_length); @@ -368,7 +368,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, } static int read_ram(struct usb_device *dev, int start_address, - int length, __u8 *buffer) + int length, u8 *buffer) { return read_download_mem(dev, start_address, length, DTK_ADDR_SPACE_XDATA, buffer); @@ -376,7 +376,7 @@ static int read_ram(struct usb_device *dev, int start_address, /* Read edgeport memory to a given block */ static int read_boot_mem(struct edgeport_serial *serial, - int start_address, int length, __u8 *buffer) + int start_address, int length, u8 *buffer) { int status = 0; int i; @@ -384,7 +384,7 @@ static int read_boot_mem(struct edgeport_serial *serial, for (i = 0; i < length; i++) { status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, serial->TI_I2C_Type, - (__u16)(start_address+i), &buffer[i], 0x01); + (u16)(start_address+i), &buffer[i], 0x01); if (status) { dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); return status; @@ -402,7 +402,7 @@ static int read_boot_mem(struct edgeport_serial *serial, /* Write given block to TI EPROM memory */ static int write_boot_mem(struct edgeport_serial *serial, - int start_address, int length, __u8 *buffer) + int start_address, int length, u8 *buffer) { int status = 0; int i; @@ -436,7 +436,7 @@ static int write_boot_mem(struct edgeport_serial *serial, /* Write edgeport I2C memory to TI chip */ static int write_i2c_mem(struct edgeport_serial *serial, - int start_address, int length, __u8 address_type, __u8 *buffer) + int start_address, int length, u8 address_type, u8 *buffer) { struct device *dev = &serial->serial->dev->dev; int status = 0; @@ -522,7 +522,7 @@ static int tx_active(struct edgeport_port *port) { int status; struct out_endpoint_desc_block *oedb; - __u8 *lsr; + u8 *lsr; int bytes_left = 0; oedb = kmalloc(sizeof(*oedb), GFP_KERNEL); @@ -593,7 +593,7 @@ static int choose_config(struct usb_device *dev) } static int read_rom(struct edgeport_serial *serial, - int start_address, int length, __u8 *buffer) + int start_address, int length, u8 *buffer) { int status; @@ -611,7 +611,7 @@ static int read_rom(struct edgeport_serial *serial, } static int write_rom(struct edgeport_serial *serial, int start_address, - int length, __u8 *buffer) + int length, u8 *buffer) { if (serial->product_info.TiMode == TI_MODE_BOOT) return write_boot_mem(serial, start_address, length, @@ -636,7 +636,7 @@ static int get_descriptor_addr(struct edgeport_serial *serial, status = read_rom(serial, start_address, sizeof(struct ti_i2c_desc), - (__u8 *)rom_desc); + (u8 *)rom_desc); if (status) return 0; @@ -652,13 +652,13 @@ static int get_descriptor_addr(struct edgeport_serial *serial, } /* Validate descriptor checksum */ -static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) +static int valid_csum(struct ti_i2c_desc *rom_desc, u8 *buffer) { - __u16 i; - __u8 cs = 0; + u16 i; + u8 cs = 0; for (i = 0; i < le16_to_cpu(rom_desc->Size); i++) - cs = (__u8)(cs + buffer[i]); + cs = (u8)(cs + buffer[i]); if (cs != rom_desc->CheckSum) { pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); @@ -674,8 +674,8 @@ static int check_i2c_image(struct edgeport_serial *serial) int status = 0; struct ti_i2c_desc *rom_desc; int start_address = 2; - __u8 *buffer; - __u16 ttype; + u8 *buffer; + u16 ttype; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) @@ -703,7 +703,7 @@ static int check_i2c_image(struct edgeport_serial *serial) status = read_rom(serial, start_address, sizeof(struct ti_i2c_desc), - (__u8 *)rom_desc); + (u8 *)rom_desc); if (status) break; @@ -748,7 +748,7 @@ out: return status; } -static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) +static int get_manuf_info(struct edgeport_serial *serial, u8 *buffer) { int status; int start_address; @@ -793,10 +793,10 @@ exit: /* Build firmware header used for firmware update */ static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw) { - __u8 *buffer; + u8 *buffer; int buffer_size; int i; - __u8 cs = 0; + u8 cs = 0; struct ti_i2c_desc *i2c_header; struct ti_i2c_image_header *img_header; struct ti_i2c_firmware_rec *firmware_rec; @@ -840,7 +840,7 @@ static int build_i2c_fw_hdr(u8 *header, const struct firmware *fw) le16_to_cpu(img_header->Length)); for (i=0; i < buffer_size; i++) { - cs = (__u8)(cs + buffer[i]); + cs = (u8)(cs + buffer[i]); } kfree(buffer); @@ -916,7 +916,7 @@ static int bulk_xfer(struct usb_serial *serial, void *buffer, } /* Download given firmware image to the device (IN BOOT MODE) */ -static int download_code(struct edgeport_serial *serial, __u8 *image, +static int download_code(struct edgeport_serial *serial, u8 *image, int image_length) { int status = 0; @@ -1090,7 +1090,7 @@ static int do_download_mode(struct edgeport_serial *serial, if (!ti_manuf_desc) return -ENOMEM; - status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + status = get_manuf_info(serial, (u8 *)ti_manuf_desc); if (status) { kfree(ti_manuf_desc); return status; @@ -1135,7 +1135,7 @@ static int do_download_mode(struct edgeport_serial *serial, status = read_rom(serial, start_address + sizeof(struct ti_i2c_desc), sizeof(struct ti_i2c_firmware_rec), - (__u8 *)firmware_version); + (u8 *)firmware_version); if (status) { kfree(firmware_version); kfree(rom_desc); @@ -1261,8 +1261,8 @@ static int do_download_mode(struct edgeport_serial *serial, if (start_address != 0) { #define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \ sizeof(struct ti_i2c_firmware_rec)) - __u8 *header; - __u8 *vheader; + u8 *header; + u8 *vheader; header = kmalloc(HEADER_SIZE, GFP_KERNEL); if (!header) { @@ -1408,8 +1408,8 @@ static int do_boot_mode(struct edgeport_serial *serial, if (!check_i2c_image(serial)) { struct ti_i2c_image_header *header; int i; - __u8 cs = 0; - __u8 *buffer; + u8 cs = 0; + u8 *buffer; int buffer_size; /* @@ -1420,7 +1420,7 @@ static int do_boot_mode(struct edgeport_serial *serial, if (!ti_manuf_desc) return -ENOMEM; - status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + status = get_manuf_info(serial, (u8 *)ti_manuf_desc); if (status) { kfree(ti_manuf_desc); goto stayinbootmode; @@ -1463,13 +1463,13 @@ static int do_boot_mode(struct edgeport_serial *serial, for (i = sizeof(struct ti_i2c_image_header); i < buffer_size; i++) { - cs = (__u8)(cs + buffer[i]); + cs = (u8)(cs + buffer[i]); } header = (struct ti_i2c_image_header *)buffer; /* update length and checksum after padding */ - header->Length = cpu_to_le16((__u16)(buffer_size - + header->Length = cpu_to_le16((u16)(buffer_size - sizeof(struct ti_i2c_image_header))); header->CheckSum = cs; @@ -1504,15 +1504,12 @@ stayinbootmode: static int ti_do_config(struct edgeport_port *port, int feature, int on) { - int port_number = port->port->port_number; - on = !!on; /* 1 or 0 not bitmask */ - return send_cmd(port->port->serial->dev, - feature, (__u8)(UMPM_UART1_PORT + port_number), - on, NULL, 0); + + return send_port_cmd(port->port, feature, on, NULL, 0); } -static int restore_mcr(struct edgeport_port *port, __u8 mcr) +static int restore_mcr(struct edgeport_port *port, u8 mcr) { int status = 0; @@ -1528,9 +1525,9 @@ static int restore_mcr(struct edgeport_port *port, __u8 mcr) } /* Convert TI LSR to standard UART flags */ -static __u8 map_line_status(__u8 ti_lsr) +static u8 map_line_status(u8 ti_lsr) { - __u8 lsr = 0; + u8 lsr = 0; #define MAP_FLAG(flagUmp, flagUart) \ if (ti_lsr & flagUmp) \ @@ -1548,7 +1545,7 @@ static __u8 map_line_status(__u8 ti_lsr) return lsr; } -static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) +static void handle_new_msr(struct edgeport_port *edge_port, u8 msr) { struct async_icount *icount; struct tty_struct *tty; @@ -1584,10 +1581,10 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) } static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, - __u8 lsr, __u8 data) + u8 lsr, u8 data) { struct async_icount *icount; - __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | + u8 new_lsr = (u8)(lsr & (u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); @@ -1599,7 +1596,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, * Parity and Framing errors only count if they * occur exclusive of a break being received. */ - new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); + new_lsr &= (u8)(LSR_OVER_ERR | LSR_BREAK); /* Place LSR data byte into Rx buffer */ if (lsr_data) @@ -1628,8 +1625,8 @@ static void edge_interrupt_callback(struct urb *urb) int port_number; int function; int retval; - __u8 lsr; - __u8 msr; + u8 lsr; + u8 msr; int status = urb->status; switch (status) { @@ -1837,7 +1834,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) struct edgeport_serial *edge_serial; struct usb_device *dev; struct urb *urb; - int port_number; int status; u16 open_settings; u8 transaction_timeout; @@ -1845,8 +1841,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) if (edge_port == NULL) return -ENODEV; - port_number = port->port_number; - dev = port->serial->dev; /* turn off loopback */ @@ -1878,8 +1872,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); /* Tell TI to open and start the port */ - status = send_cmd(dev, UMPC_OPEN_PORT, - (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0); + status = send_port_cmd(port, UMPC_OPEN_PORT, open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status); @@ -1887,8 +1880,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) } /* Start the DMA? */ - status = send_cmd(dev, UMPC_START_PORT, - (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); + status = send_port_cmd(port, UMPC_START_PORT, 0, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send start DMA command, %d\n", __func__, status); @@ -1905,9 +1897,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) } /* Read Initial MSR */ - status = ti_vread_sync(dev, UMPC_READ_MSR, 0, - (__u16)(UMPM_UART1_PORT + port_number), - &edge_port->shadow_msr, 1); + status = read_port_cmd(port, UMPC_READ_MSR, 0, &edge_port->shadow_msr, 1); if (status) { dev_err(&port->dev, "%s - cannot send read MSR command, %d\n", __func__, status); @@ -1971,9 +1961,7 @@ static void edge_close(struct usb_serial_port *port) { struct edgeport_serial *edge_serial; struct edgeport_port *edge_port; - struct usb_serial *serial = port->serial; unsigned long flags; - int port_number; edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); @@ -1994,9 +1982,7 @@ static void edge_close(struct usb_serial_port *port) spin_unlock_irqrestore(&edge_port->ep_lock, flags); dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); - port_number = port->port_number; - send_cmd(serial->dev, UMPC_CLOSE_PORT, - (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); + send_port_cmd(port, UMPC_CLOSE_PORT, 0, NULL, 0); mutex_lock(&edge_serial->es_lock); --edge_port->edge_serial->num_ports_open; @@ -2229,7 +2215,6 @@ static void change_port_settings(struct tty_struct *tty, int baud; unsigned cflag; int status; - int port_number = edge_port->port->port_number; config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { @@ -2244,7 +2229,7 @@ static void change_port_settings(struct tty_struct *tty, /* These flags must be set */ config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT; config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR; - config->bUartMode = (__u8)(edge_port->bUartMode); + config->bUartMode = (u8)(edge_port->bUartMode); switch (cflag & CSIZE) { case CS5: @@ -2336,7 +2321,7 @@ static void change_port_settings(struct tty_struct *tty, } edge_port->baud_rate = baud; - config->wBaudRate = (__u16)((461550L + baud/2) / baud); + config->wBaudRate = (u16)((461550L + baud/2) / baud); /* FIXME: Recompute actual baud from divisor here */ @@ -2355,9 +2340,8 @@ static void change_port_settings(struct tty_struct *tty, cpu_to_be16s(&config->wFlags); cpu_to_be16s(&config->wBaudRate); - status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG, - (__u8)(UMPM_UART1_PORT + port_number), - 0, (__u8 *)config, sizeof(*config)); + status = send_port_cmd(edge_port->port, UMPC_SET_CONFIG, 0, config, + sizeof(*config)); if (status) dev_dbg(dev, "%s - error %d when trying to write config to device\n", __func__, status); @@ -2433,28 +2417,6 @@ static int edge_tiocmget(struct tty_struct *tty) return result; } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - struct edgeport_port *edge_port = usb_get_serial_port_data(port); - unsigned cwait; - - cwait = edge_port->port->port.closing_wait; - if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = jiffies_to_msecs(cwait) / 10; - - ss->type = PORT_16550A; - ss->line = edge_port->port->minor; - ss->port = edge_port->port->port_number; - ss->irq = 0; - ss->xmit_fifo_size = edge_port->port->bulk_out_size; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = cwait; - return 0; -} - static void edge_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; @@ -2615,7 +2577,10 @@ static int edge_port_probe(struct usb_serial_port *port) if (ret) goto err; - port->port.closing_wait = msecs_to_jiffies(closing_wait * 10); + /* + * The LSR does not tell when the transmitter shift register has + * emptied so add a one-character drain delay. + */ port->port.drain_delay = 1; return 0; @@ -2713,7 +2678,6 @@ static struct usb_serial_driver edgeport_1port_device = { .release = edge_release, .port_probe = edge_port_probe, .port_remove = edge_port_remove, - .get_serial = get_serial_info, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, @@ -2752,7 +2716,6 @@ static struct usb_serial_driver edgeport_2port_device = { .release = edge_release, .port_probe = edge_port_probe, .port_remove = edge_port_remove, - .get_serial = get_serial_info, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, .tiocmset = edge_tiocmset, @@ -2783,9 +2746,6 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_FIRMWARE("edgeport/down3.bin"); -module_param(closing_wait, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); - module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ignore_cpu_rev, "Ignore the cpu revision when connecting to a device"); diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h index 50b899d55ed0..24fe1312c84d 100644 --- a/drivers/usb/serial/io_ti.h +++ b/drivers/usb/serial/io_ti.h @@ -133,15 +133,15 @@ #define UMPD_OEDB2_ADDRESS 0xFF10 struct out_endpoint_desc_block { - __u8 Configuration; - __u8 XBufAddr; - __u8 XByteCount; - __u8 Unused1; - __u8 Unused2; - __u8 YBufAddr; - __u8 YByteCount; - __u8 BufferSize; -} __attribute__((packed)); + u8 Configuration; + u8 XBufAddr; + u8 XByteCount; + u8 Unused1; + u8 Unused2; + u8 YBufAddr; + u8 YByteCount; + u8 BufferSize; +}; /* @@ -150,16 +150,16 @@ struct out_endpoint_desc_block { */ /* UART settings */ struct ump_uart_config { - __u16 wBaudRate; /* Baud rate */ - __u16 wFlags; /* Bitmap mask of flags */ - __u8 bDataBits; /* 5..8 - data bits per character */ - __u8 bParity; /* Parity settings */ - __u8 bStopBits; /* Stop bits settings */ + u16 wBaudRate; /* Baud rate */ + u16 wFlags; /* Bitmap mask of flags */ + u8 bDataBits; /* 5..8 - data bits per character */ + u8 bParity; /* Parity settings */ + u8 bStopBits; /* Stop bits settings */ char cXon; /* XON character */ char cXoff; /* XOFF character */ - __u8 bUartMode; /* Will be updated when a user */ + u8 bUartMode; /* Will be updated when a user */ /* interface is defined */ -} __attribute__((packed)); +}; /* @@ -168,9 +168,9 @@ struct ump_uart_config { */ /* Interrupt packet structure */ struct ump_interrupt { - __u8 bICode; /* Interrupt code (interrupt num) */ - __u8 bIInfo; /* Interrupt information */ -} __attribute__((packed)); + u8 bICode; /* Interrupt code (interrupt num) */ + u8 bIInfo; /* Interrupt information */ +}; #define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 6) & 0x01) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 093afd67a664..19753611e7b0 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -643,7 +643,6 @@ static void iuu_uart_read_callback(struct urb *urb) struct iuu_private *priv = usb_get_serial_port_data(port); unsigned long flags; int status = urb->status; - int error = 0; int len = 0; unsigned char *data = urb->transfer_buffer; priv->poll++; @@ -660,12 +659,11 @@ static void iuu_uart_read_callback(struct urb *urb) if (urb->actual_length > 1) { dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__, urb->actual_length); - error = 1; return; } /* if len > 0 call readbuf */ - if (len > 0 && error == 0) { + if (len > 0) { dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n", __func__, len); status = iuu_read_buf(port, len); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 622077dcc344..b04a029e3657 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -41,27 +41,7 @@ #define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" #define DRIVER_DESC "Keyspan USB to Serial Converter Driver" -/* Function prototypes for Keyspan serial converter */ -static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port); -static void keyspan_close(struct usb_serial_port *port); -static void keyspan_dtr_rts(struct usb_serial_port *port, int on); -static int keyspan_startup(struct usb_serial *serial); -static void keyspan_disconnect(struct usb_serial *serial); -static void keyspan_release(struct usb_serial *serial); -static int keyspan_port_probe(struct usb_serial_port *port); -static void keyspan_port_remove(struct usb_serial_port *port); -static int keyspan_write_room(struct tty_struct *tty); -static int keyspan_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count); static void keyspan_send_setup(struct usb_serial_port *port, int reset_port); -static void keyspan_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old); -static void keyspan_break_ctl(struct tty_struct *tty, int break_state); -static int keyspan_tiocmget(struct tty_struct *tty); -static int keyspan_tiocmset(struct tty_struct *tty, unsigned int set, - unsigned int clear); -static int keyspan_fake_startup(struct usb_serial *serial); static int keyspan_usa19_calc_baud(struct usb_serial_port *port, u32 baud_rate, u32 baudclk, diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c index 0bfe4459c37f..f9ce9e7b9b80 100644 --- a/drivers/usb/serial/metro-usb.c +++ b/drivers/usb/serial/metro-usb.c @@ -299,7 +299,7 @@ static int metrousb_tiocmset(struct tty_struct *tty, unsigned long flags = 0; unsigned long control_state = 0; - dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear); + dev_dbg(&port->dev, "%s - set=%d, clear=%d\n", __func__, set, clear); spin_lock_irqsave(&metro_priv->lock, flags); control_state = metro_priv->control_state; @@ -334,7 +334,7 @@ static void metrousb_unthrottle(struct tty_struct *tty) /* Submit the urb to read from the port. */ result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); if (result) - dev_err(tty->dev, + dev_err(&port->dev, "failed submitting interrupt in urb error code=%d\n", result); } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 701dfb32b129..d3f1bdb26fd4 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1634,23 +1634,6 @@ static int mos7720_tiocmset(struct tty_struct *tty, return 0; } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7720_port = usb_get_serial_port_data(port); - - ss->type = PORT_16550A; - ss->line = mos7720_port->port->minor; - ss->port = mos7720_port->port->port_number; - ss->irq = 0; - ss->xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = 30*HZ; - return 0; -} - static int mos7720_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { @@ -1790,7 +1773,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .ioctl = mos7720_ioctl, .tiocmget = mos7720_tiocmget, .tiocmset = mos7720_tiocmset, - .get_serial = get_serial_info, .set_termios = mos7720_set_termios, .write = mos7720_write, .write_room = mos7720_write_room, diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 1bf0d066f55a..28e4093794e0 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1384,28 +1384,6 @@ static int mos7840_get_lsr_info(struct tty_struct *tty, } /***************************************************************************** - * mos7840_get_serial_info - * function to get information about serial port - *****************************************************************************/ - -static int mos7840_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - struct moschip_port *mos7840_port = usb_get_serial_port_data(port); - - ss->type = PORT_16550A; - ss->line = mos7840_port->port->minor; - ss->port = mos7840_port->port->port_number; - ss->irq = 0; - ss->xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; - ss->baud_base = 9600; - ss->close_delay = 5 * HZ; - ss->closing_wait = 30 * HZ; - return 0; -} - -/***************************************************************************** * SerialIoctl * this function handles any ioctl calls to the driver *****************************************************************************/ @@ -1783,7 +1761,6 @@ static struct usb_serial_driver moschip7840_4port_device = { .probe = mos7840_probe, .attach = mos7840_attach, .ioctl = mos7840_ioctl, - .get_serial = mos7840_get_serial_info, .set_termios = mos7840_set_termios, .break_ctl = mos7840_break, .tiocmget = mos7840_tiocmget, diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index eecb72aef83e..40c713fae0c3 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -352,23 +352,6 @@ static int opticon_tiocmset(struct tty_struct *tty, return 0; } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - /* fake emulate a 16550 uart to make userspace code happy */ - ss->type = PORT_16550A; - ss->line = port->minor; - ss->port = 0; - ss->irq = 0; - ss->xmit_fifo_size = 1024; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = 30*HZ; - return 0; -} - static int opticon_port_probe(struct usb_serial_port *port) { struct opticon_private *priv; @@ -410,7 +393,6 @@ static struct usb_serial_driver opticon_device = { .chars_in_buffer = opticon_chars_in_buffer, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, - .get_serial = get_serial_info, .tiocmget = opticon_tiocmget, .tiocmset = opticon_tiocmset, .process_read_urb = opticon_process_read_urb, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c6969ca72839..3e79a543d3e7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2095,8 +2095,6 @@ static struct usb_serial_driver option_1port_device = { .chars_in_buffer = usb_wwan_chars_in_buffer, .tiocmget = usb_wwan_tiocmget, .tiocmset = usb_wwan_tiocmset, - .get_serial = usb_wwan_get_serial_info, - .set_serial = usb_wwan_set_serial_info, .attach = option_attach, .release = option_release, .port_probe = usb_wwan_port_probe, diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index eed9acd1ae08..fd773d252691 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -173,17 +173,22 @@ MODULE_DEVICE_TABLE(usb, id_table); static void pl2303_set_break(struct usb_serial_port *port, bool enable); enum pl2303_type { - TYPE_01, /* Type 0 and 1 (difference unknown) */ - TYPE_HX, /* HX version of the pl2303 chip */ - TYPE_HXN, /* HXN version of the pl2303 chip */ + TYPE_H, + TYPE_HX, + TYPE_TA, + TYPE_TB, + TYPE_HXD, + TYPE_HXN, TYPE_COUNT }; struct pl2303_type_data { + const char *name; speed_t max_baud_rate; unsigned long quirks; unsigned int no_autoxonxoff:1; unsigned int no_divisors:1; + unsigned int alt_divisors:1; }; struct pl2303_serial_private { @@ -200,15 +205,32 @@ struct pl2303_private { }; static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = { - [TYPE_01] = { + [TYPE_H] = { + .name = "H", .max_baud_rate = 1228800, .quirks = PL2303_QUIRK_LEGACY, .no_autoxonxoff = true, }, [TYPE_HX] = { + .name = "HX", + .max_baud_rate = 6000000, + }, + [TYPE_TA] = { + .name = "TA", + .max_baud_rate = 6000000, + .alt_divisors = true, + }, + [TYPE_TB] = { + .name = "TB", + .max_baud_rate = 12000000, + .alt_divisors = true, + }, + [TYPE_HXD] = { + .name = "HXD", .max_baud_rate = 12000000, }, [TYPE_HXN] = { + .name = "G", .max_baud_rate = 12000000, .no_divisors = true, }, @@ -362,42 +384,82 @@ static int pl2303_calc_num_ports(struct usb_serial *serial, return 1; } +static bool pl2303_supports_hx_status(struct usb_serial *serial) +{ + int ret; + u8 buf; + + ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST, + VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS, + 0, &buf, 1, 100, GFP_KERNEL); + + return ret == 0; +} + +static int pl2303_detect_type(struct usb_serial *serial) +{ + struct usb_device_descriptor *desc = &serial->dev->descriptor; + u16 bcdDevice, bcdUSB; + + /* + * Legacy PL2303H, variants 0 and 1 (difference unknown). + */ + if (desc->bDeviceClass == 0x02) + return TYPE_H; /* variant 0 */ + + if (desc->bMaxPacketSize0 != 0x40) { + if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff) + return TYPE_H; /* variant 1 */ + + return TYPE_H; /* variant 0 */ + } + + bcdDevice = le16_to_cpu(desc->bcdDevice); + bcdUSB = le16_to_cpu(desc->bcdUSB); + + switch (bcdDevice) { + case 0x100: + /* + * Assume it's an HXN-type if the device doesn't support the old read + * request value. + */ + if (bcdUSB == 0x200 && !pl2303_supports_hx_status(serial)) + return TYPE_HXN; + break; + case 0x300: + if (bcdUSB == 0x200) + return TYPE_TA; + + return TYPE_HX; + case 0x400: + return TYPE_HXD; + case 0x500: + return TYPE_TB; + } + + dev_err(&serial->interface->dev, + "unknown device type, please report to linux-usb@vger.kernel.org\n"); + return -ENODEV; +} + static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; - enum pl2303_type type = TYPE_01; + enum pl2303_type type; unsigned char *buf; - int res; + int ret; + + ret = pl2303_detect_type(serial); + if (ret < 0) + return ret; + + type = ret; + dev_dbg(&serial->interface->dev, "device type: %s\n", pl2303_type_data[type].name); spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; - buf = kmalloc(1, GFP_KERNEL); - if (!buf) { - kfree(spriv); - return -ENOMEM; - } - - if (serial->dev->descriptor.bDeviceClass == 0x02) - type = TYPE_01; /* type 0 */ - else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) - type = TYPE_HX; - else if (serial->dev->descriptor.bDeviceClass == 0x00) - type = TYPE_01; /* type 1 */ - else if (serial->dev->descriptor.bDeviceClass == 0xFF) - type = TYPE_01; /* type 1 */ - dev_dbg(&serial->interface->dev, "device type: %d\n", type); - - if (type == TYPE_HX) { - res = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, - PL2303_READ_TYPE_HX_STATUS, 0, buf, 1, 100); - if (res != 1) - type = TYPE_HXN; - } - spriv->type = &pl2303_type_data[type]; spriv->quirks = (unsigned long)usb_get_serial_data(serial); spriv->quirks |= spriv->type->quirks; @@ -405,6 +467,12 @@ static int pl2303_startup(struct usb_serial *serial) usb_set_serial_data(serial, spriv); if (type != TYPE_HXN) { + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + kfree(spriv); + return -ENOMEM; + } + pl2303_vendor_read(serial, 0x8484, buf); pl2303_vendor_write(serial, 0x0404, 0); pl2303_vendor_read(serial, 0x8484, buf); @@ -419,9 +487,9 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_write(serial, 2, 0x24); else pl2303_vendor_write(serial, 2, 0x44); - } - kfree(buf); + kfree(buf); + } return 0; } @@ -553,6 +621,45 @@ static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4], return baud; } +static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4], + speed_t baud) +{ + unsigned int baseline, mantissa, exponent; + + /* + * Apparently, for the TA version the formula is: + * baudrate = 12M * 32 / (mantissa * 2^exponent) + * where + * mantissa = buf[10:0] + * exponent = buf[15:13 16] + */ + baseline = 12000000 * 32; + mantissa = baseline / baud; + if (mantissa == 0) + mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */ + exponent = 0; + while (mantissa >= 2048) { + if (exponent < 15) { + mantissa >>= 1; /* divide by 2 */ + exponent++; + } else { + /* Exponent is maxed. Trim mantissa and leave. */ + mantissa = 2047; + break; + } + } + + buf[3] = 0x80; + buf[2] = exponent & 0x01; + buf[1] = (exponent & ~0x01) << 4 | mantissa >> 8; + buf[0] = mantissa & 0xff; + + /* Calculate and return the exact baud rate. */ + baud = (baseline / mantissa) >> exponent; + + return baud; +} + static void pl2303_encode_baud_rate(struct tty_struct *tty, struct usb_serial_port *port, u8 buf[4]) @@ -580,6 +687,8 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty, if (baud == baud_sup) baud = pl2303_encode_baud_rate_direct(buf, baud); + else if (spriv->type->alt_divisors) + baud = pl2303_encode_baud_rate_divisor_alt(buf, baud); else baud = pl2303_encode_baud_rate_divisor(buf, baud); @@ -939,18 +1048,6 @@ static int pl2303_carrier_raised(struct usb_serial_port *port) return 0; } -static int pl2303_get_serial(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - ss->type = PORT_16654; - ss->line = port->minor; - ss->port = port->port_number; - ss->baud_base = 460800; - return 0; -} - static void pl2303_set_break(struct usb_serial_port *port, bool enable) { struct usb_serial *serial = port->serial; @@ -1134,7 +1231,6 @@ static struct usb_serial_driver pl2303_device = { .close = pl2303_close, .dtr_rts = pl2303_dtr_rts, .carrier_raised = pl2303_carrier_raised, - .get_serial = pl2303_get_serial, .break_ctl = pl2303_break_ctl, .set_termios = pl2303_set_termios, .tiocmget = pl2303_tiocmget, diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 599dcb2e374d..5f2e7f668e68 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -453,21 +453,6 @@ static void qt2_disconnect(struct usb_serial *serial) usb_kill_urb(serial_priv->read_urb); } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - ss->line = port->minor; - ss->port = 0; - ss->irq = 0; - ss->xmit_fifo_size = port->bulk_out_size; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = 30*HZ; - return 0; -} - static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch) { switch (*ch) { @@ -978,7 +963,6 @@ static struct usb_serial_driver qt2_device = { .tiocmset = qt2_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, - .get_serial = get_serial_info, .set_termios = qt2_set_termios, }; diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 89fdc5c19285..3baf7c0f5a98 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -331,21 +331,6 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) return usb_serial_generic_open(tty, port); } -static int get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - ss->line = port->minor; - ss->port = 0; - ss->irq = 0; - ss->xmit_fifo_size = port->bulk_out_size; - ss->baud_base = 9600; - ss->close_delay = 5*HZ; - ss->closing_wait = 30*HZ; - return 0; -} - static int ssu100_attach(struct usb_serial *serial) { return ssu100_initdevice(serial->dev); @@ -545,7 +530,6 @@ static struct usb_serial_driver ssu100_device = { .tiocmset = ssu100_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, - .get_serial = get_serial_info, .set_termios = ssu100_set_termios, }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 7252b0ce75a6..caa46ac23db9 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -121,6 +121,7 @@ #define TI_LSR_ERROR 0x0F #define TI_LSR_RX_FULL 0x10 #define TI_LSR_TX_EMPTY 0x20 +#define TI_LSR_TX_EMPTY_BOTH 0x40 /* Line control */ #define TI_LCR_BREAK 0x40 @@ -183,7 +184,7 @@ struct ti_uart_config { char cXon; char cXoff; u8 bUartMode; -} __packed; +}; /* Get port status */ struct ti_port_status { @@ -192,7 +193,7 @@ struct ti_port_status { u8 bErrorCode; u8 bMSR; u8 bLSR; -} __packed; +}; /* Purge modes */ #define TI_PURGE_OUTPUT 0x00 @@ -223,25 +224,25 @@ struct ti_write_data_bytes { } __packed; struct ti_read_data_request { - __u8 bAddrType; - __u8 bDataType; - __u8 bDataCounter; + u8 bAddrType; + u8 bDataType; + u8 bDataCounter; __be16 wBaseAddrHi; __be16 wBaseAddrLo; } __packed; struct ti_read_data_bytes { - __u8 bCmdCode; - __u8 bModuleId; - __u8 bErrorCode; - __u8 bData[]; -} __packed; + u8 bCmdCode; + u8 bModuleId; + u8 bErrorCode; + u8 bData[]; +}; /* Interrupt struct */ struct ti_interrupt { - __u8 bICode; - __u8 bIInfo; -} __packed; + u8 bICode; + u8 bIInfo; +}; /* Interrupt codes */ #define TI_CODE_HARDWARE_ERROR 0xFF @@ -270,8 +271,6 @@ struct ti_firmware_header { #define TI_TRANSFER_TIMEOUT 2 -#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ - /* read urb states */ #define TI_READ_URB_RUNNING 0 #define TI_READ_URB_STOPPING 1 @@ -328,27 +327,26 @@ static void ti_recv(struct usb_serial_port *port, unsigned char *data, static void ti_send(struct ti_port *tport); static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); static int ti_get_lsr(struct ti_port *tport, u8 *lsr); -static int ti_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss); -static int ti_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss); +static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss); static void ti_handle_new_msr(struct ti_port *tport, u8 msr); static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); -static int ti_command_out_sync(struct ti_device *tdev, __u8 command, - __u16 moduleid, __u16 value, __u8 *data, int size); -static int ti_command_in_sync(struct ti_device *tdev, __u8 command, - __u16 moduleid, __u16 value, __u8 *data, int size); +static int ti_command_out_sync(struct usb_device *udev, u8 command, + u16 moduleid, u16 value, void *data, int size); +static int ti_command_in_sync(struct usb_device *udev, u8 command, + u16 moduleid, u16 value, void *data, int size); +static int ti_port_cmd_out(struct usb_serial_port *port, u8 command, + u16 value, void *data, int size); +static int ti_port_cmd_in(struct usb_serial_port *port, u8 command, + u16 value, void *data, int size); static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, unsigned long addr, u8 mask, u8 byte); static int ti_download_firmware(struct ti_device *tdev); -static int closing_wait = TI_DEFAULT_CLOSING_WAIT; - static const struct usb_device_id ti_id_table_3410[] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, @@ -435,7 +433,6 @@ static struct usb_serial_driver ti_1port_device = { .throttle = ti_throttle, .unthrottle = ti_unthrottle, .get_serial = ti_get_serial_info, - .set_serial = ti_set_serial_info, .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, @@ -469,7 +466,6 @@ static struct usb_serial_driver ti_2port_device = { .throttle = ti_throttle, .unthrottle = ti_unthrottle, .get_serial = ti_get_serial_info, - .set_serial = ti_set_serial_info, .set_termios = ti_set_termios, .tiocmget = ti_tiocmget, .tiocmset = ti_tiocmset, @@ -502,10 +498,6 @@ MODULE_FIRMWARE("moxa/moxa-1131.fw"); MODULE_FIRMWARE("moxa/moxa-1150.fw"); MODULE_FIRMWARE("moxa/moxa-1151.fw"); -module_param(closing_wait, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(closing_wait, - "Maximum wait for data to drain in close, in .01 secs, default is 4000"); - MODULE_DEVICE_TABLE(usb, ti_id_table_combined); module_usb_serial_driver(serial_drivers, ti_id_table_combined); @@ -613,7 +605,6 @@ static int ti_port_probe(struct usb_serial_port *port) tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; else tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; - port->port.closing_wait = msecs_to_jiffies(10 * closing_wait); tport->tp_port = port; tport->tp_tdev = usb_get_serial_data(port->serial); @@ -624,7 +615,12 @@ static int ti_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, tport); - port->port.drain_delay = 3; + /* + * The TUSB5052 LSR does not tell when the transmitter shift register + * has emptied so add a one-character drain delay. + */ + if (!tport->tp_tdev->td_is_3410) + port->port.drain_delay = 1; return 0; } @@ -643,7 +639,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) struct ti_device *tdev; struct usb_device *dev; struct urb *urb; - int port_number; int status; u16 open_settings; @@ -658,8 +653,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - port_number = port->port_number; - tport->tp_msr = 0; tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); @@ -683,31 +676,27 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - status = ti_command_out_sync(tdev, TI_OPEN_PORT, - (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); + status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command, %d\n", __func__, status); goto unlink_int_urb; } - status = ti_command_out_sync(tdev, TI_START_PORT, - (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send start command, %d\n", __func__, status); goto unlink_int_urb; } - status = ti_command_out_sync(tdev, TI_PURGE_PORT, - (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); + status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __func__, status); goto unlink_int_urb; } - status = ti_command_out_sync(tdev, TI_PURGE_PORT, - (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); + status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __func__, status); @@ -722,16 +711,14 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) if (tty) ti_set_termios(tty, port, &tty->termios); - status = ti_command_out_sync(tdev, TI_OPEN_PORT, - (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); + status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __func__, status); goto unlink_int_urb; } - status = ti_command_out_sync(tdev, TI_START_PORT, - (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0); if (status) { dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __func__, status); @@ -772,7 +759,6 @@ static void ti_close(struct usb_serial_port *port) { struct ti_device *tdev; struct ti_port *tport; - int port_number; int status; unsigned long flags; @@ -788,10 +774,7 @@ static void ti_close(struct usb_serial_port *port) kfifo_reset_out(&port->write_fifo); spin_unlock_irqrestore(&tport->tp_lock, flags); - port_number = port->port_number; - - status = ti_command_out_sync(tdev, TI_CLOSE_PORT, - (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0); if (status) dev_err(&port->dev, "%s - cannot send close port command, %d\n" @@ -861,11 +844,20 @@ static int ti_chars_in_buffer(struct tty_struct *tty) static bool ti_tx_empty(struct usb_serial_port *port) { struct ti_port *tport = usb_get_serial_port_data(port); + u8 lsr, mask; int ret; - u8 lsr; + + /* + * TUSB5052 does not have the TEMT bit to tell if the shift register + * is empty. + */ + if (tport->tp_tdev->td_is_3410) + mask = TI_LSR_TX_EMPTY_BOTH; + else + mask = TI_LSR_TX_EMPTY; ret = ti_get_lsr(tport, &lsr); - if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + if (!ret && !(lsr & mask)) return false; return true; @@ -903,7 +895,6 @@ static void ti_set_termios(struct tty_struct *tty, struct ti_uart_config *config; int baud; int status; - int port_number = port->port_number; unsigned int mcr; u16 wbaudrate; u16 wflags = 0; @@ -919,18 +910,18 @@ static void ti_set_termios(struct tty_struct *tty, switch (C_CSIZE(tty)) { case CS5: - config->bDataBits = TI_UART_5_DATA_BITS; - break; + config->bDataBits = TI_UART_5_DATA_BITS; + break; case CS6: - config->bDataBits = TI_UART_6_DATA_BITS; - break; + config->bDataBits = TI_UART_6_DATA_BITS; + break; case CS7: - config->bDataBits = TI_UART_7_DATA_BITS; - break; + config->bDataBits = TI_UART_7_DATA_BITS; + break; default: case CS8: - config->bDataBits = TI_UART_8_DATA_BITS; - break; + config->bDataBits = TI_UART_8_DATA_BITS; + break; } /* CMSPAR isn't supported by this driver */ @@ -997,12 +988,11 @@ static void ti_set_termios(struct tty_struct *tty, config->wBaudRate = cpu_to_be16(wbaudrate); config->wFlags = cpu_to_be16(wflags); - status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, - (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, - sizeof(*config)); + status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config, + sizeof(*config)); if (status) dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", - __func__, port_number, status); + __func__, port->port_number, status); /* SET_CONFIG asserts RTS and DTR, reset them correctly */ mcr = tport->tp_shadow_mcr; @@ -1011,9 +1001,8 @@ static void ti_set_termios(struct tty_struct *tty, mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); status = ti_set_mcr(tport, mcr); if (status) - dev_err(&port->dev, - "%s - cannot set modem control on port %d, %d\n", - __func__, port_number, status); + dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", + __func__, port->port_number, status); kfree(config); } @@ -1364,9 +1353,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) static int ti_get_lsr(struct ti_port *tport, u8 *lsr) { int size, status; - struct ti_device *tdev = tport->tp_tdev; struct usb_serial_port *port = tport->tp_port; - int port_number = port->port_number; struct ti_port_status *data; size = sizeof(struct ti_port_status); @@ -1374,8 +1361,7 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr) if (!data) return -ENOMEM; - status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, - (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); + status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size); if (status) { dev_err(&port->dev, "%s - get port status command failed, %d\n", @@ -1393,41 +1379,12 @@ free_data: } -static int ti_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) +static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; struct ti_port *tport = usb_get_serial_port_data(port); - unsigned cwait; - - cwait = port->port.closing_wait; - if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = jiffies_to_msecs(cwait) / 10; - ss->type = PORT_16550A; - ss->line = port->minor; - ss->port = port->port_number; - ss->xmit_fifo_size = kfifo_size(&port->write_fifo); ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; - ss->closing_wait = cwait; - return 0; -} - - -static int ti_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - struct ti_port *tport = usb_get_serial_port_data(port); - unsigned cwait; - - cwait = ss->closing_wait; - if (cwait != ASYNC_CLOSING_WAIT_NONE) - cwait = msecs_to_jiffies(10 * ss->closing_wait); - - tport->tp_port->port.closing_wait = cwait; - - return 0; } @@ -1501,34 +1458,28 @@ static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty) return status; } - -static int ti_command_out_sync(struct ti_device *tdev, __u8 command, - __u16 moduleid, __u16 value, __u8 *data, int size) +static int ti_command_out_sync(struct usb_device *udev, u8 command, + u16 moduleid, u16 value, void *data, int size) { int status; - status = usb_control_msg(tdev->td_serial->dev, - usb_sndctrlpipe(tdev->td_serial->dev, 0), command, - (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), - value, moduleid, data, size, 1000); - + status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + value, moduleid, data, size, 1000); if (status < 0) return status; return 0; } - -static int ti_command_in_sync(struct ti_device *tdev, __u8 command, - __u16 moduleid, __u16 value, __u8 *data, int size) +static int ti_command_in_sync(struct usb_device *udev, u8 command, + u16 moduleid, u16 value, void *data, int size) { int status; - status = usb_control_msg(tdev->td_serial->dev, - usb_rcvctrlpipe(tdev->td_serial->dev, 0), command, - (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), - value, moduleid, data, size, 1000); - + status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + value, moduleid, data, size, 1000); if (status == size) status = 0; else if (status >= 0) @@ -1537,6 +1488,21 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command, return status; } +static int ti_port_cmd_out(struct usb_serial_port *port, u8 command, + u16 value, void *data, int size) +{ + return ti_command_out_sync(port->serial->dev, command, + TI_UART1_PORT + port->port_number, + value, data, size); +} + +static int ti_port_cmd_in(struct usb_serial_port *port, u8 command, + u16 value, void *data, int size) +{ + return ti_command_in_sync(port->serial->dev, command, + TI_UART1_PORT + port->port_number, + value, data, size); +} static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, unsigned long addr, @@ -1562,9 +1528,8 @@ static int ti_write_byte(struct usb_serial_port *port, data->bData[0] = mask; data->bData[1] = byte; - status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0, - (__u8 *)data, size); - + status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA, + TI_RAM_PORT, 0, data, size); if (status < 0) dev_err(&port->dev, "%s - failed, %d\n", __func__, status); diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c index 26d7b003b7e3..63d4a784ae45 100644 --- a/drivers/usb/serial/upd78f0730.c +++ b/drivers/usb/serial/upd78f0730.c @@ -182,7 +182,6 @@ static void upd78f0730_port_remove(struct usb_serial_port *port) static int upd78f0730_tiocmget(struct tty_struct *tty) { - struct device *dev = tty->dev; struct upd78f0730_port_private *private; struct usb_serial_port *port = tty->driver_data; int signals; @@ -197,7 +196,7 @@ static int upd78f0730_tiocmget(struct tty_struct *tty) res = ((signals & UPD78F0730_DTR) ? TIOCM_DTR : 0) | ((signals & UPD78F0730_RTS) ? TIOCM_RTS : 0); - dev_dbg(dev, "%s - res = %x\n", __func__, res); + dev_dbg(&port->dev, "%s - res = %x\n", __func__, res); return res; } @@ -205,10 +204,10 @@ static int upd78f0730_tiocmget(struct tty_struct *tty) static int upd78f0730_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { - struct device *dev = tty->dev; struct usb_serial_port *port = tty->driver_data; struct upd78f0730_port_private *private; struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; int res; private = usb_get_serial_port_data(port); @@ -241,10 +240,10 @@ static int upd78f0730_tiocmset(struct tty_struct *tty, static void upd78f0730_break_ctl(struct tty_struct *tty, int break_state) { - struct device *dev = tty->dev; struct upd78f0730_port_private *private; struct usb_serial_port *port = tty->driver_data; struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; private = usb_get_serial_port_data(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 27e3bb58c872..98b33b1b5357 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -121,6 +121,44 @@ static void release_minors(struct usb_serial *serial) serial->minors_reserved = 0; } +int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf) +{ + struct usb_driver *driver = serial->type->usb_driver; + int ret; + + if (serial->sibling) + return -EBUSY; + + ret = usb_driver_claim_interface(driver, intf, serial); + if (ret) { + dev_err(&serial->interface->dev, + "failed to claim sibling interface: %d\n", ret); + return ret; + } + + serial->sibling = intf; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_serial_claim_interface); + +static void release_sibling(struct usb_serial *serial, struct usb_interface *intf) +{ + struct usb_driver *driver = serial->type->usb_driver; + struct usb_interface *sibling; + + if (!serial->sibling) + return; + + if (intf == serial->sibling) + sibling = serial->interface; + else + sibling = serial->sibling; + + usb_set_intfdata(sibling, NULL); + usb_driver_release_interface(driver, sibling); +} + static void destroy_serial(struct kref *kref) { struct usb_serial *serial; @@ -243,7 +281,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); return tty_port_open(&port->port, tty, filp); } @@ -272,7 +310,7 @@ static void serial_hangup(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); tty_port_hangup(&port->port); } @@ -281,7 +319,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); tty_port_close(&port->port, tty, filp); } @@ -301,7 +339,7 @@ static void serial_cleanup(struct tty_struct *tty) struct usb_serial *serial; struct module *owner; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); /* The console is magical. Do not hang up the console hardware * or there will be tears. @@ -329,7 +367,7 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf, if (port->serial->dev->state == USB_STATE_NOTATTACHED) goto exit; - dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count); + dev_dbg(&port->dev, "%s - %d byte(s)\n", __func__, count); retval = port->serial->type->write(tty, port, buf, count); if (retval < 0) @@ -342,7 +380,7 @@ static int serial_write_room(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); return port->serial->type->write_room(tty); } @@ -352,7 +390,7 @@ static int serial_chars_in_buffer(struct tty_struct *tty) struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (serial->disconnected) return 0; @@ -365,7 +403,7 @@ static void serial_wait_until_sent(struct tty_struct *tty, int timeout) struct usb_serial_port *port = tty->driver_data; struct usb_serial *serial = port->serial; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (!port->serial->type->wait_until_sent) return; @@ -380,7 +418,7 @@ static void serial_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->throttle) port->serial->type->throttle(tty); @@ -390,7 +428,7 @@ static void serial_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->unthrottle) port->serial->type->unthrottle(tty); @@ -399,19 +437,62 @@ static void serial_unthrottle(struct tty_struct *tty) static int serial_get_serial(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; + struct tty_port *tport = &port->port; + unsigned int close_delay, closing_wait; + + mutex_lock(&tport->mutex); + + close_delay = jiffies_to_msecs(tport->close_delay) / 10; + closing_wait = tport->closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = jiffies_to_msecs(closing_wait) / 10; + + ss->line = port->minor; + ss->close_delay = close_delay; + ss->closing_wait = closing_wait; if (port->serial->type->get_serial) - return port->serial->type->get_serial(tty, ss); - return -ENOTTY; + port->serial->type->get_serial(tty, ss); + + mutex_unlock(&tport->mutex); + + return 0; } static int serial_set_serial(struct tty_struct *tty, struct serial_struct *ss) { struct usb_serial_port *port = tty->driver_data; + struct tty_port *tport = &port->port; + unsigned int close_delay, closing_wait; + int ret = 0; + + close_delay = msecs_to_jiffies(ss->close_delay * 10); + closing_wait = ss->closing_wait; + if (closing_wait != ASYNC_CLOSING_WAIT_NONE) + closing_wait = msecs_to_jiffies(closing_wait * 10); + + mutex_lock(&tport->mutex); + + if (!capable(CAP_SYS_ADMIN)) { + if (close_delay != tport->close_delay || + closing_wait != tport->closing_wait) { + ret = -EPERM; + goto out_unlock; + } + } - if (port->serial->type->set_serial) - return port->serial->type->set_serial(tty, ss); - return -ENOTTY; + if (port->serial->type->set_serial) { + ret = port->serial->type->set_serial(tty, ss); + if (ret) + goto out_unlock; + } + + tport->close_delay = close_delay; + tport->closing_wait = closing_wait; +out_unlock: + mutex_unlock(&tport->mutex); + + return ret; } static int serial_ioctl(struct tty_struct *tty, @@ -420,7 +501,7 @@ static int serial_ioctl(struct tty_struct *tty, struct usb_serial_port *port = tty->driver_data; int retval = -ENOIOCTLCMD; - dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd); + dev_dbg(&port->dev, "%s - cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCMIWAIT: @@ -439,7 +520,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->set_termios) port->serial->type->set_termios(tty, port, old); @@ -451,7 +532,7 @@ static int serial_break(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->break_ctl) port->serial->type->break_ctl(tty, break_state); @@ -498,11 +579,11 @@ static int serial_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->tiocmget) return port->serial->type->tiocmget(tty); - return -EINVAL; + return -ENOTTY; } static int serial_tiocmset(struct tty_struct *tty, @@ -510,11 +591,11 @@ static int serial_tiocmset(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->tiocmset) return port->serial->type->tiocmset(tty, set, clear); - return -EINVAL; + return -ENOTTY; } static int serial_get_icount(struct tty_struct *tty, @@ -522,11 +603,11 @@ static int serial_get_icount(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dev_dbg(tty->dev, "%s\n", __func__); + dev_dbg(&port->dev, "%s\n", __func__); if (port->serial->type->get_icount) return port->serial->type->get_icount(tty, icount); - return -EINVAL; + return -ENOTTY; } /* @@ -711,36 +792,48 @@ static const struct tty_port_operations serial_port_ops = { .shutdown = serial_port_shutdown, }; -static void find_endpoints(struct usb_serial *serial, - struct usb_serial_endpoints *epds) +static void store_endpoint(struct usb_serial *serial, + struct usb_serial_endpoints *epds, + struct usb_endpoint_descriptor *epd) { struct device *dev = &serial->interface->dev; + u8 addr = epd->bEndpointAddress; + + if (usb_endpoint_is_bulk_in(epd)) { + if (epds->num_bulk_in == ARRAY_SIZE(epds->bulk_in)) + return; + dev_dbg(dev, "found bulk in endpoint %02x\n", addr); + epds->bulk_in[epds->num_bulk_in++] = epd; + } else if (usb_endpoint_is_bulk_out(epd)) { + if (epds->num_bulk_out == ARRAY_SIZE(epds->bulk_out)) + return; + dev_dbg(dev, "found bulk out endpoint %02x\n", addr); + epds->bulk_out[epds->num_bulk_out++] = epd; + } else if (usb_endpoint_is_int_in(epd)) { + if (epds->num_interrupt_in == ARRAY_SIZE(epds->interrupt_in)) + return; + dev_dbg(dev, "found interrupt in endpoint %02x\n", addr); + epds->interrupt_in[epds->num_interrupt_in++] = epd; + } else if (usb_endpoint_is_int_out(epd)) { + if (epds->num_interrupt_out == ARRAY_SIZE(epds->interrupt_out)) + return; + dev_dbg(dev, "found interrupt out endpoint %02x\n", addr); + epds->interrupt_out[epds->num_interrupt_out++] = epd; + } +} + +static void find_endpoints(struct usb_serial *serial, + struct usb_serial_endpoints *epds, + struct usb_interface *intf) +{ struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *epd; unsigned int i; - BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_in) < USB_MAXENDPOINTS / 2); - BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < USB_MAXENDPOINTS / 2); - BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_in) < USB_MAXENDPOINTS / 2); - BUILD_BUG_ON(ARRAY_SIZE(epds->interrupt_out) < USB_MAXENDPOINTS / 2); - - iface_desc = serial->interface->cur_altsetting; + iface_desc = intf->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { epd = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_bulk_in(epd)) { - dev_dbg(dev, "found bulk in on endpoint %u\n", i); - epds->bulk_in[epds->num_bulk_in++] = epd; - } else if (usb_endpoint_is_bulk_out(epd)) { - dev_dbg(dev, "found bulk out on endpoint %u\n", i); - epds->bulk_out[epds->num_bulk_out++] = epd; - } else if (usb_endpoint_is_int_in(epd)) { - dev_dbg(dev, "found interrupt in on endpoint %u\n", i); - epds->interrupt_in[epds->num_interrupt_in++] = epd; - } else if (usb_endpoint_is_int_out(epd)) { - dev_dbg(dev, "found interrupt out on endpoint %u\n", i); - epds->interrupt_out[epds->num_interrupt_out++] = epd; - } + store_endpoint(serial, epds, epd); } } @@ -906,7 +999,7 @@ static int usb_serial_probe(struct usb_interface *interface, if (retval) { dev_dbg(ddev, "sub driver rejected device\n"); - goto err_put_serial; + goto err_release_sibling; } } @@ -914,10 +1007,12 @@ static int usb_serial_probe(struct usb_interface *interface, epds = kzalloc(sizeof(*epds), GFP_KERNEL); if (!epds) { retval = -ENOMEM; - goto err_put_serial; + goto err_release_sibling; } - find_endpoints(serial, epds); + find_endpoints(serial, epds, interface); + if (serial->sibling) + find_endpoints(serial, epds, serial->sibling); if (epds->num_bulk_in < type->num_bulk_in || epds->num_bulk_out < type->num_bulk_out || @@ -1065,7 +1160,8 @@ exit: err_free_epds: kfree(epds); -err_put_serial: +err_release_sibling: + release_sibling(serial, interface); usb_serial_put(serial); err_put_module: module_put(type->driver.owner); @@ -1081,6 +1177,10 @@ static void usb_serial_disconnect(struct usb_interface *interface) struct usb_serial_port *port; struct tty_struct *tty; + /* sibling interface is cleaning up */ + if (!serial) + return; + usb_serial_console_disconnect(serial); mutex_lock(&serial->disc_mutex); @@ -1104,6 +1204,8 @@ static void usb_serial_disconnect(struct usb_interface *interface) if (serial->type->disconnect) serial->type->disconnect(serial); + release_sibling(serial, interface); + /* let the last holder of this object cause it to be cleaned up */ usb_serial_put(serial); dev_info(dev, "device disconnected\n"); @@ -1112,9 +1214,11 @@ static void usb_serial_disconnect(struct usb_interface *interface) int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) { struct usb_serial *serial = usb_get_intfdata(intf); - int i, r = 0; + int i, r; - serial->suspending = 1; + /* suspend when called for first sibling interface */ + if (serial->suspend_count++) + return 0; /* * serial->type->suspend() MUST return 0 in system sleep context, @@ -1124,15 +1228,15 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) if (serial->type->suspend) { r = serial->type->suspend(serial, message); if (r < 0) { - serial->suspending = 0; - goto err_out; + serial->suspend_count--; + return r; } } for (i = 0; i < serial->num_ports; ++i) usb_serial_port_poison_urbs(serial->port[i]); -err_out: - return r; + + return 0; } EXPORT_SYMBOL(usb_serial_suspend); @@ -1149,9 +1253,12 @@ int usb_serial_resume(struct usb_interface *intf) struct usb_serial *serial = usb_get_intfdata(intf); int rv; + /* resume when called for last sibling interface */ + if (--serial->suspend_count) + return 0; + usb_serial_unpoison_port_urbs(serial); - serial->suspending = 0; if (serial->type->resume) rv = serial->type->resume(serial); else @@ -1166,9 +1273,12 @@ static int usb_serial_reset_resume(struct usb_interface *intf) struct usb_serial *serial = usb_get_intfdata(intf); int rv; + /* resume when called for last sibling interface */ + if (--serial->suspend_count) + return 0; + usb_serial_unpoison_port_urbs(serial); - serial->suspending = 0; if (serial->type->reset_resume) { rv = serial->type->reset_resume(serial); } else { diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h index 79dafd98e0a1..b5331d03092f 100644 --- a/drivers/usb/serial/usb-wwan.h +++ b/drivers/usb/serial/usb-wwan.h @@ -15,10 +15,6 @@ extern int usb_wwan_write_room(struct tty_struct *tty); extern int usb_wwan_tiocmget(struct tty_struct *tty); extern int usb_wwan_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -extern int usb_wwan_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss); -extern int usb_wwan_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss); extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); extern int usb_wwan_chars_in_buffer(struct tty_struct *tty); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 46d46a4f99c9..3eb72c59ede6 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -132,51 +132,6 @@ int usb_wwan_tiocmset(struct tty_struct *tty, } EXPORT_SYMBOL(usb_wwan_tiocmset); -int usb_wwan_get_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - - ss->line = port->minor; - ss->port = port->port_number; - ss->baud_base = tty_get_baud_rate(port->port.tty); - ss->close_delay = port->port.close_delay / 10; - ss->closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : - port->port.closing_wait / 10; - return 0; -} -EXPORT_SYMBOL(usb_wwan_get_serial_info); - -int usb_wwan_set_serial_info(struct tty_struct *tty, - struct serial_struct *ss) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned int closing_wait, close_delay; - int retval = 0; - - close_delay = ss->close_delay * 10; - closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10; - - mutex_lock(&port->port.mutex); - - if (!capable(CAP_SYS_ADMIN)) { - if ((close_delay != port->port.close_delay) || - (closing_wait != port->port.closing_wait)) - retval = -EPERM; - else - retval = -EOPNOTSUPP; - } else { - port->port.close_delay = close_delay; - port->port.closing_wait = closing_wait; - } - - mutex_unlock(&port->port.mutex); - return retval; -} -EXPORT_SYMBOL(usb_wwan_set_serial_info); - int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count) { diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index ccfd5ed652cd..5116ed9db3eb 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -83,7 +83,7 @@ static void whiteheat_port_remove(struct usb_serial_port *port); static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port); static void whiteheat_close(struct usb_serial_port *port); -static int whiteheat_get_serial(struct tty_struct *tty, +static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss); static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -170,7 +170,6 @@ static int firm_report_tx_done(struct usb_serial_port *port); #define COMMAND_PORT 4 #define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ #define COMMAND_TIMEOUT_MS 2000 -#define CLOSING_DELAY (30 * HZ) /***************************************************************************** @@ -440,21 +439,9 @@ static int whiteheat_tiocmset(struct tty_struct *tty, } -static int whiteheat_get_serial(struct tty_struct *tty, - struct serial_struct *ss) +static void whiteheat_get_serial(struct tty_struct *tty, struct serial_struct *ss) { - struct usb_serial_port *port = tty->driver_data; - - ss->type = PORT_16654; - ss->line = port->minor; - ss->port = port->port_number; - ss->xmit_fifo_size = kfifo_size(&port->write_fifo); - ss->custom_divisor = 0; ss->baud_base = 460800; - ss->close_delay = CLOSING_DELAY; - ss->closing_wait = CLOSING_DELAY; - - return 0; } diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c index 0ca04906da4b..6853cd56d8dc 100644 --- a/drivers/usb/serial/xr_serial.c +++ b/drivers/usb/serial/xr_serial.c @@ -3,6 +3,7 @@ * MaxLinear/Exar USB to Serial driver * * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org> + * Copyright (c) 2021 Johan Hovold <johan@kernel.org> * * Based on the initial driver written by Patong Yang: * @@ -16,6 +17,7 @@ #include <linux/slab.h> #include <linux/tty.h> #include <linux/usb.h> +#include <linux/usb/cdc.h> #include <linux/usb/serial.h> struct xr_txrx_clk_mask { @@ -28,10 +30,12 @@ struct xr_txrx_clk_mask { #define XR21V141X_MIN_SPEED 46U #define XR21V141X_MAX_SPEED XR_INT_OSC_HZ -/* USB Requests */ -#define XR21V141X_SET_REQ 0 -#define XR21V141X_GET_REQ 1 +/* XR21V141X register blocks */ +#define XR21V141X_UART_REG_BLOCK 0 +#define XR21V141X_UM_REG_BLOCK 4 +#define XR21V141X_UART_CUSTOM_BLOCK 0x66 +/* XR21V141X UART registers */ #define XR21V141X_CLOCK_DIVISOR_0 0x04 #define XR21V141X_CLOCK_DIVISOR_1 0x05 #define XR21V141X_CLOCK_DIVISOR_2 0x06 @@ -39,13 +43,9 @@ struct xr_txrx_clk_mask { #define XR21V141X_TX_CLOCK_MASK_1 0x08 #define XR21V141X_RX_CLOCK_MASK_0 0x09 #define XR21V141X_RX_CLOCK_MASK_1 0x0a +#define XR21V141X_REG_FORMAT 0x0b -/* XR21V141X register blocks */ -#define XR21V141X_UART_REG_BLOCK 0 -#define XR21V141X_UM_REG_BLOCK 4 -#define XR21V141X_UART_CUSTOM_BLOCK 0x66 - -/* XR21V141X UART Manager Registers */ +/* XR21V141X UART Manager registers */ #define XR21V141X_UM_FIFO_ENABLE_REG 0x10 #define XR21V141X_UM_ENABLE_TX_FIFO 0x01 #define XR21V141X_UM_ENABLE_RX_FIFO 0x02 @@ -53,72 +53,203 @@ struct xr_txrx_clk_mask { #define XR21V141X_UM_RX_FIFO_RESET 0x18 #define XR21V141X_UM_TX_FIFO_RESET 0x1c -#define XR21V141X_UART_ENABLE_TX 0x1 -#define XR21V141X_UART_ENABLE_RX 0x2 - -#define XR21V141X_UART_MODE_RI BIT(0) -#define XR21V141X_UART_MODE_CD BIT(1) -#define XR21V141X_UART_MODE_DSR BIT(2) -#define XR21V141X_UART_MODE_DTR BIT(3) -#define XR21V141X_UART_MODE_CTS BIT(4) -#define XR21V141X_UART_MODE_RTS BIT(5) - -#define XR21V141X_UART_BREAK_ON 0xff -#define XR21V141X_UART_BREAK_OFF 0 - -#define XR21V141X_UART_DATA_MASK GENMASK(3, 0) -#define XR21V141X_UART_DATA_7 0x7 -#define XR21V141X_UART_DATA_8 0x8 - -#define XR21V141X_UART_PARITY_MASK GENMASK(6, 4) -#define XR21V141X_UART_PARITY_SHIFT 4 -#define XR21V141X_UART_PARITY_NONE (0x0 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_ODD (0x1 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_EVEN (0x2 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_MARK (0x3 << XR21V141X_UART_PARITY_SHIFT) -#define XR21V141X_UART_PARITY_SPACE (0x4 << XR21V141X_UART_PARITY_SHIFT) - -#define XR21V141X_UART_STOP_MASK BIT(7) -#define XR21V141X_UART_STOP_SHIFT 7 -#define XR21V141X_UART_STOP_1 (0x0 << XR21V141X_UART_STOP_SHIFT) -#define XR21V141X_UART_STOP_2 (0x1 << XR21V141X_UART_STOP_SHIFT) - -#define XR21V141X_UART_FLOW_MODE_NONE 0x0 -#define XR21V141X_UART_FLOW_MODE_HW 0x1 -#define XR21V141X_UART_FLOW_MODE_SW 0x2 - -#define XR21V141X_UART_MODE_GPIO_MASK GENMASK(2, 0) -#define XR21V141X_UART_MODE_RTS_CTS 0x1 -#define XR21V141X_UART_MODE_DTR_DSR 0x2 -#define XR21V141X_UART_MODE_RS485 0x3 -#define XR21V141X_UART_MODE_RS485_ADDR 0x4 - -#define XR21V141X_REG_ENABLE 0x03 -#define XR21V141X_REG_FORMAT 0x0b -#define XR21V141X_REG_FLOW_CTRL 0x0c -#define XR21V141X_REG_XON_CHAR 0x10 -#define XR21V141X_REG_XOFF_CHAR 0x11 -#define XR21V141X_REG_LOOPBACK 0x12 -#define XR21V141X_REG_TX_BREAK 0x14 -#define XR21V141X_REG_RS845_DELAY 0x15 -#define XR21V141X_REG_GPIO_MODE 0x1a -#define XR21V141X_REG_GPIO_DIR 0x1b -#define XR21V141X_REG_GPIO_INT_MASK 0x1c -#define XR21V141X_REG_GPIO_SET 0x1d -#define XR21V141X_REG_GPIO_CLR 0x1e -#define XR21V141X_REG_GPIO_STATUS 0x1f - -static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val) +#define XR_UART_ENABLE_TX 0x1 +#define XR_UART_ENABLE_RX 0x2 + +#define XR_GPIO_RI BIT(0) +#define XR_GPIO_CD BIT(1) +#define XR_GPIO_DSR BIT(2) +#define XR_GPIO_DTR BIT(3) +#define XR_GPIO_CTS BIT(4) +#define XR_GPIO_RTS BIT(5) +#define XR_GPIO_CLK BIT(6) +#define XR_GPIO_XEN BIT(7) +#define XR_GPIO_TXT BIT(8) +#define XR_GPIO_RXT BIT(9) + +#define XR_UART_DATA_MASK GENMASK(3, 0) +#define XR_UART_DATA_7 0x7 +#define XR_UART_DATA_8 0x8 + +#define XR_UART_PARITY_MASK GENMASK(6, 4) +#define XR_UART_PARITY_SHIFT 4 +#define XR_UART_PARITY_NONE (0x0 << XR_UART_PARITY_SHIFT) +#define XR_UART_PARITY_ODD (0x1 << XR_UART_PARITY_SHIFT) +#define XR_UART_PARITY_EVEN (0x2 << XR_UART_PARITY_SHIFT) +#define XR_UART_PARITY_MARK (0x3 << XR_UART_PARITY_SHIFT) +#define XR_UART_PARITY_SPACE (0x4 << XR_UART_PARITY_SHIFT) + +#define XR_UART_STOP_MASK BIT(7) +#define XR_UART_STOP_SHIFT 7 +#define XR_UART_STOP_1 (0x0 << XR_UART_STOP_SHIFT) +#define XR_UART_STOP_2 (0x1 << XR_UART_STOP_SHIFT) + +#define XR_UART_FLOW_MODE_NONE 0x0 +#define XR_UART_FLOW_MODE_HW 0x1 +#define XR_UART_FLOW_MODE_SW 0x2 + +#define XR_GPIO_MODE_SEL_MASK GENMASK(2, 0) +#define XR_GPIO_MODE_SEL_RTS_CTS 0x1 +#define XR_GPIO_MODE_SEL_DTR_DSR 0x2 +#define XR_GPIO_MODE_SEL_RS485 0x3 +#define XR_GPIO_MODE_SEL_RS485_ADDR 0x4 +#define XR_GPIO_MODE_TX_TOGGLE 0x100 +#define XR_GPIO_MODE_RX_TOGGLE 0x200 + +#define XR_FIFO_RESET 0x1 + +#define XR_CUSTOM_DRIVER_ACTIVE 0x1 + +static int xr21v141x_uart_enable(struct usb_serial_port *port); +static int xr21v141x_uart_disable(struct usb_serial_port *port); +static int xr21v141x_fifo_reset(struct usb_serial_port *port); +static void xr21v141x_set_line_settings(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); + +struct xr_type { + int reg_width; + u8 reg_recipient; + u8 set_reg; + u8 get_reg; + + u16 uart_enable; + u16 flow_control; + u16 xon_char; + u16 xoff_char; + u16 tx_break; + u16 gpio_mode; + u16 gpio_direction; + u16 gpio_set; + u16 gpio_clear; + u16 gpio_status; + u16 tx_fifo_reset; + u16 rx_fifo_reset; + u16 custom_driver; + + bool have_5_6_bit_mode; + bool have_xmit_toggle; + + int (*enable)(struct usb_serial_port *port); + int (*disable)(struct usb_serial_port *port); + int (*fifo_reset)(struct usb_serial_port *port); + void (*set_line_settings)(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); +}; + +enum xr_type_id { + XR21V141X, + XR21B142X, + XR21B1411, + XR2280X, + XR_TYPE_COUNT, +}; + +static const struct xr_type xr_types[] = { + [XR21V141X] = { + .reg_width = 8, + .reg_recipient = USB_RECIP_DEVICE, + .set_reg = 0x00, + .get_reg = 0x01, + + .uart_enable = 0x03, + .flow_control = 0x0c, + .xon_char = 0x10, + .xoff_char = 0x11, + .tx_break = 0x14, + .gpio_mode = 0x1a, + .gpio_direction = 0x1b, + .gpio_set = 0x1d, + .gpio_clear = 0x1e, + .gpio_status = 0x1f, + + .enable = xr21v141x_uart_enable, + .disable = xr21v141x_uart_disable, + .fifo_reset = xr21v141x_fifo_reset, + .set_line_settings = xr21v141x_set_line_settings, + }, + [XR21B142X] = { + .reg_width = 16, + .reg_recipient = USB_RECIP_INTERFACE, + .set_reg = 0x00, + .get_reg = 0x00, + + .uart_enable = 0x00, + .flow_control = 0x06, + .xon_char = 0x07, + .xoff_char = 0x08, + .tx_break = 0x0a, + .gpio_mode = 0x0c, + .gpio_direction = 0x0d, + .gpio_set = 0x0e, + .gpio_clear = 0x0f, + .gpio_status = 0x10, + .tx_fifo_reset = 0x40, + .rx_fifo_reset = 0x43, + .custom_driver = 0x60, + + .have_5_6_bit_mode = true, + .have_xmit_toggle = true, + }, + [XR21B1411] = { + .reg_width = 12, + .reg_recipient = USB_RECIP_DEVICE, + .set_reg = 0x00, + .get_reg = 0x01, + + .uart_enable = 0xc00, + .flow_control = 0xc06, + .xon_char = 0xc07, + .xoff_char = 0xc08, + .tx_break = 0xc0a, + .gpio_mode = 0xc0c, + .gpio_direction = 0xc0d, + .gpio_set = 0xc0e, + .gpio_clear = 0xc0f, + .gpio_status = 0xc10, + .tx_fifo_reset = 0xc80, + .rx_fifo_reset = 0xcc0, + .custom_driver = 0x20d, + }, + [XR2280X] = { + .reg_width = 16, + .reg_recipient = USB_RECIP_DEVICE, + .set_reg = 0x05, + .get_reg = 0x05, + + .uart_enable = 0x40, + .flow_control = 0x46, + .xon_char = 0x47, + .xoff_char = 0x48, + .tx_break = 0x4a, + .gpio_mode = 0x4c, + .gpio_direction = 0x4d, + .gpio_set = 0x4e, + .gpio_clear = 0x4f, + .gpio_status = 0x50, + .tx_fifo_reset = 0x60, + .rx_fifo_reset = 0x63, + .custom_driver = 0x81, + }, +}; + +struct xr_data { + const struct xr_type *type; + u8 channel; /* zero-based index or interface number */ +}; + +static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val) { + struct xr_data *data = usb_get_serial_port_data(port); + const struct xr_type *type = data->type; struct usb_serial *serial = port->serial; int ret; - ret = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - XR21V141X_SET_REQ, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - val, reg | (block << 8), NULL, 0, - USB_CTRL_SET_TIMEOUT); + ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + type->set_reg, + USB_DIR_OUT | USB_TYPE_VENDOR | type->reg_recipient, + val, (channel << 8) | reg, NULL, 0, + USB_CTRL_SET_TIMEOUT); if (ret < 0) { dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret); return ret; @@ -127,24 +258,33 @@ static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val) return 0; } -static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val) +static int xr_get_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 *val) { + struct xr_data *data = usb_get_serial_port_data(port); + const struct xr_type *type = data->type; struct usb_serial *serial = port->serial; u8 *dmabuf; - int ret; + int ret, len; + + if (type->reg_width == 8) + len = 1; + else + len = 2; - dmabuf = kmalloc(1, GFP_KERNEL); + dmabuf = kmalloc(len, GFP_KERNEL); if (!dmabuf) return -ENOMEM; - ret = usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - XR21V141X_GET_REQ, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, reg | (block << 8), dmabuf, 1, - USB_CTRL_GET_TIMEOUT); - if (ret == 1) { - *val = *dmabuf; + ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + type->get_reg, + USB_DIR_IN | USB_TYPE_VENDOR | type->reg_recipient, + 0, (channel << 8) | reg, dmabuf, len, + USB_CTRL_GET_TIMEOUT); + if (ret == len) { + if (len == 2) + *val = le16_to_cpup((__le16 *)dmabuf); + else + *val = *dmabuf; ret = 0; } else { dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret); @@ -157,21 +297,45 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val) return ret; } -static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val) +static int xr_set_reg_uart(struct usb_serial_port *port, u16 reg, u16 val) { - return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val); + struct xr_data *data = usb_get_serial_port_data(port); + + return xr_set_reg(port, data->channel, reg, val); } -static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val) +static int xr_get_reg_uart(struct usb_serial_port *port, u16 reg, u16 *val) { - return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val); + struct xr_data *data = usb_get_serial_port_data(port); + + return xr_get_reg(port, data->channel, reg, val); } -static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val) +static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val) { + struct xr_data *data = usb_get_serial_port_data(port); + u8 reg; + + reg = reg_base + data->channel; + return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val); } +static int __xr_uart_enable(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + return xr_set_reg_uart(port, data->type->uart_enable, + XR_UART_ENABLE_TX | XR_UART_ENABLE_RX); +} + +static int __xr_uart_disable(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + return xr_set_reg_uart(port, data->type->uart_enable, 0); +} + /* * According to datasheet, below is the recommended sequence for enabling UART * module in XR21V141X: @@ -180,7 +344,7 @@ static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val) * Enable Tx and Rx * Enable Rx FIFO */ -static int xr_uart_enable(struct usb_serial_port *port) +static int xr21v141x_uart_enable(struct usb_serial_port *port) { int ret; @@ -189,25 +353,23 @@ static int xr_uart_enable(struct usb_serial_port *port) if (ret) return ret; - ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE, - XR21V141X_UART_ENABLE_TX | XR21V141X_UART_ENABLE_RX); + ret = __xr_uart_enable(port); if (ret) return ret; ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO); - if (ret) - xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0); + __xr_uart_disable(port); return ret; } -static int xr_uart_disable(struct usb_serial_port *port) +static int xr21v141x_uart_disable(struct usb_serial_port *port) { int ret; - ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0); + ret = __xr_uart_disable(port); if (ret) return ret; @@ -216,13 +378,68 @@ static int xr_uart_disable(struct usb_serial_port *port) return ret; } +static int xr_uart_enable(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + if (data->type->enable) + return data->type->enable(port); + + return __xr_uart_enable(port); +} + +static int xr_uart_disable(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + if (data->type->disable) + return data->type->disable(port); + + return __xr_uart_disable(port); +} + +static int xr21v141x_fifo_reset(struct usb_serial_port *port) +{ + int ret; + + ret = xr_set_reg_um(port, XR21V141X_UM_TX_FIFO_RESET, XR_FIFO_RESET); + if (ret) + return ret; + + ret = xr_set_reg_um(port, XR21V141X_UM_RX_FIFO_RESET, XR_FIFO_RESET); + if (ret) + return ret; + + return 0; +} + +static int xr_fifo_reset(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + int ret; + + if (data->type->fifo_reset) + return data->type->fifo_reset(port); + + ret = xr_set_reg_uart(port, data->type->tx_fifo_reset, XR_FIFO_RESET); + if (ret) + return ret; + + ret = xr_set_reg_uart(port, data->type->rx_fifo_reset, XR_FIFO_RESET); + if (ret) + return ret; + + return 0; +} + static int xr_tiocmget(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; - u8 status; + struct xr_data *data = usb_get_serial_port_data(port); + u16 status; int ret; - ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_STATUS, &status); + ret = xr_get_reg_uart(port, data->type->gpio_status, &status); if (ret) return ret; @@ -230,12 +447,12 @@ static int xr_tiocmget(struct tty_struct *tty) * Modem control pins are active low, so reading '0' means it is active * and '1' means not active. */ - ret = ((status & XR21V141X_UART_MODE_DTR) ? 0 : TIOCM_DTR) | - ((status & XR21V141X_UART_MODE_RTS) ? 0 : TIOCM_RTS) | - ((status & XR21V141X_UART_MODE_CTS) ? 0 : TIOCM_CTS) | - ((status & XR21V141X_UART_MODE_DSR) ? 0 : TIOCM_DSR) | - ((status & XR21V141X_UART_MODE_RI) ? 0 : TIOCM_RI) | - ((status & XR21V141X_UART_MODE_CD) ? 0 : TIOCM_CD); + ret = ((status & XR_GPIO_DTR) ? 0 : TIOCM_DTR) | + ((status & XR_GPIO_RTS) ? 0 : TIOCM_RTS) | + ((status & XR_GPIO_CTS) ? 0 : TIOCM_CTS) | + ((status & XR_GPIO_DSR) ? 0 : TIOCM_DSR) | + ((status & XR_GPIO_RI) ? 0 : TIOCM_RI) | + ((status & XR_GPIO_CD) ? 0 : TIOCM_CD); return ret; } @@ -243,26 +460,28 @@ static int xr_tiocmget(struct tty_struct *tty) static int xr_tiocmset_port(struct usb_serial_port *port, unsigned int set, unsigned int clear) { - u8 gpio_set = 0; - u8 gpio_clr = 0; + struct xr_data *data = usb_get_serial_port_data(port); + const struct xr_type *type = data->type; + u16 gpio_set = 0; + u16 gpio_clr = 0; int ret = 0; /* Modem control pins are active low, so set & clr are swapped */ if (set & TIOCM_RTS) - gpio_clr |= XR21V141X_UART_MODE_RTS; + gpio_clr |= XR_GPIO_RTS; if (set & TIOCM_DTR) - gpio_clr |= XR21V141X_UART_MODE_DTR; + gpio_clr |= XR_GPIO_DTR; if (clear & TIOCM_RTS) - gpio_set |= XR21V141X_UART_MODE_RTS; + gpio_set |= XR_GPIO_RTS; if (clear & TIOCM_DTR) - gpio_set |= XR21V141X_UART_MODE_DTR; + gpio_set |= XR_GPIO_DTR; /* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */ if (gpio_clr) - ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_CLR, gpio_clr); + ret = xr_set_reg_uart(port, type->gpio_clear, gpio_clr); if (gpio_set) - ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_SET, gpio_set); + ret = xr_set_reg_uart(port, type->gpio_set, gpio_set); return ret; } @@ -286,16 +505,18 @@ static void xr_dtr_rts(struct usb_serial_port *port, int on) static void xr_break_ctl(struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; - u8 state; + struct xr_data *data = usb_get_serial_port_data(port); + const struct xr_type *type = data->type; + u16 state; if (break_state == 0) - state = XR21V141X_UART_BREAK_OFF; + state = 0; else - state = XR21V141X_UART_BREAK_ON; + state = GENMASK(type->reg_width - 1, 0); + + dev_dbg(&port->dev, "Turning break %s\n", state == 0 ? "off" : "on"); - dev_dbg(&port->dev, "Turning break %s\n", - state == XR21V141X_UART_BREAK_OFF ? "off" : "on"); - xr_set_reg_uart(port, XR21V141X_REG_TX_BREAK, state); + xr_set_reg_uart(port, type->tx_break, state); } /* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */ @@ -334,8 +555,7 @@ static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = { { 0xfff, 0xffe, 0xffd }, }; -static int xr_set_baudrate(struct tty_struct *tty, - struct usb_serial_port *port) +static int xr21v141x_set_baudrate(struct tty_struct *tty, struct usb_serial_port *port) { u32 divisor, baud, idx; u16 tx_mask, rx_mask; @@ -405,43 +625,47 @@ static void xr_set_flow_mode(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { - u8 flow, gpio_mode; + struct xr_data *data = usb_get_serial_port_data(port); + const struct xr_type *type = data->type; + u16 flow, gpio_mode; int ret; - ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_MODE, &gpio_mode); + ret = xr_get_reg_uart(port, type->gpio_mode, &gpio_mode); if (ret) return; + /* + * According to the datasheets, the UART needs to be disabled while + * writing to the FLOW_CONTROL register (XR21V141X), or any register + * but GPIO_SET, GPIO_CLEAR, TX_BREAK and ERROR_STATUS (XR21B142X). + */ + xr_uart_disable(port); + /* Set GPIO mode for controlling the pins manually by default. */ - gpio_mode &= ~XR21V141X_UART_MODE_GPIO_MASK; + gpio_mode &= ~XR_GPIO_MODE_SEL_MASK; if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) { dev_dbg(&port->dev, "Enabling hardware flow ctrl\n"); - gpio_mode |= XR21V141X_UART_MODE_RTS_CTS; - flow = XR21V141X_UART_FLOW_MODE_HW; + gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS; + flow = XR_UART_FLOW_MODE_HW; } else if (I_IXON(tty)) { u8 start_char = START_CHAR(tty); u8 stop_char = STOP_CHAR(tty); dev_dbg(&port->dev, "Enabling sw flow ctrl\n"); - flow = XR21V141X_UART_FLOW_MODE_SW; + flow = XR_UART_FLOW_MODE_SW; - xr_set_reg_uart(port, XR21V141X_REG_XON_CHAR, start_char); - xr_set_reg_uart(port, XR21V141X_REG_XOFF_CHAR, stop_char); + xr_set_reg_uart(port, type->xon_char, start_char); + xr_set_reg_uart(port, type->xoff_char, stop_char); } else { dev_dbg(&port->dev, "Disabling flow ctrl\n"); - flow = XR21V141X_UART_FLOW_MODE_NONE; + flow = XR_UART_FLOW_MODE_NONE; } - /* - * As per the datasheet, UART needs to be disabled while writing to - * FLOW_CONTROL register. - */ - xr_uart_disable(port); - xr_set_reg_uart(port, XR21V141X_REG_FLOW_CTRL, flow); - xr_uart_enable(port); + xr_set_reg_uart(port, type->flow_control, flow); + xr_set_reg_uart(port, type->gpio_mode, gpio_mode); - xr_set_reg_uart(port, XR21V141X_REG_GPIO_MODE, gpio_mode); + xr_uart_enable(port); if (C_BAUD(tty) == B0) xr_dtr_rts(port, 0); @@ -449,16 +673,15 @@ static void xr_set_flow_mode(struct tty_struct *tty, xr_dtr_rts(port, 1); } -static void xr_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old_termios) +static void xr21v141x_set_line_settings(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) { struct ktermios *termios = &tty->termios; u8 bits = 0; int ret; if (!old_termios || (tty->termios.c_ospeed != old_termios->c_ospeed)) - xr_set_baudrate(tty, port); + xr21v141x_set_baudrate(tty, port); switch (C_CSIZE(tty)) { case CS5: @@ -468,61 +691,154 @@ static void xr_set_termios(struct tty_struct *tty, if (old_termios) termios->c_cflag |= old_termios->c_cflag & CSIZE; else - bits |= XR21V141X_UART_DATA_8; + termios->c_cflag |= CS8; + + if (C_CSIZE(tty) == CS7) + bits |= XR_UART_DATA_7; + else + bits |= XR_UART_DATA_8; break; case CS7: - bits |= XR21V141X_UART_DATA_7; + bits |= XR_UART_DATA_7; break; case CS8: default: - bits |= XR21V141X_UART_DATA_8; + bits |= XR_UART_DATA_8; break; } if (C_PARENB(tty)) { if (C_CMSPAR(tty)) { if (C_PARODD(tty)) - bits |= XR21V141X_UART_PARITY_MARK; + bits |= XR_UART_PARITY_MARK; else - bits |= XR21V141X_UART_PARITY_SPACE; + bits |= XR_UART_PARITY_SPACE; } else { if (C_PARODD(tty)) - bits |= XR21V141X_UART_PARITY_ODD; + bits |= XR_UART_PARITY_ODD; else - bits |= XR21V141X_UART_PARITY_EVEN; + bits |= XR_UART_PARITY_EVEN; } } if (C_CSTOPB(tty)) - bits |= XR21V141X_UART_STOP_2; + bits |= XR_UART_STOP_2; else - bits |= XR21V141X_UART_STOP_1; + bits |= XR_UART_STOP_1; ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits); if (ret) return; +} + +static void xr_cdc_set_line_coding(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct xr_data *data = usb_get_serial_port_data(port); + struct usb_host_interface *alt = port->serial->interface->cur_altsetting; + struct usb_device *udev = port->serial->dev; + struct usb_cdc_line_coding *lc; + int ret; + + lc = kzalloc(sizeof(*lc), GFP_KERNEL); + if (!lc) + return; + + if (tty->termios.c_ospeed) + lc->dwDTERate = cpu_to_le32(tty->termios.c_ospeed); + else if (old_termios) + lc->dwDTERate = cpu_to_le32(old_termios->c_ospeed); + else + lc->dwDTERate = cpu_to_le32(9600); + + if (C_CSTOPB(tty)) + lc->bCharFormat = USB_CDC_2_STOP_BITS; + else + lc->bCharFormat = USB_CDC_1_STOP_BITS; + + if (C_PARENB(tty)) { + if (C_CMSPAR(tty)) { + if (C_PARODD(tty)) + lc->bParityType = USB_CDC_MARK_PARITY; + else + lc->bParityType = USB_CDC_SPACE_PARITY; + } else { + if (C_PARODD(tty)) + lc->bParityType = USB_CDC_ODD_PARITY; + else + lc->bParityType = USB_CDC_EVEN_PARITY; + } + } else { + lc->bParityType = USB_CDC_NO_PARITY; + } + + if (!data->type->have_5_6_bit_mode && + (C_CSIZE(tty) == CS5 || C_CSIZE(tty) == CS6)) { + tty->termios.c_cflag &= ~CSIZE; + if (old_termios) + tty->termios.c_cflag |= old_termios->c_cflag & CSIZE; + else + tty->termios.c_cflag |= CS8; + } + + switch (C_CSIZE(tty)) { + case CS5: + lc->bDataBits = 5; + break; + case CS6: + lc->bDataBits = 6; + break; + case CS7: + lc->bDataBits = 7; + break; + case CS8: + default: + lc->bDataBits = 8; + break; + } + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_CDC_REQ_SET_LINE_CODING, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, alt->desc.bInterfaceNumber, + lc, sizeof(*lc), USB_CTRL_SET_TIMEOUT); + if (ret < 0) + dev_err(&port->dev, "Failed to set line coding: %d\n", ret); + + kfree(lc); +} + +static void xr_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + /* + * XR21V141X does not have a CUSTOM_DRIVER flag and always enters CDC + * mode upon receiving CDC requests. + */ + if (data->type->set_line_settings) + data->type->set_line_settings(tty, port, old_termios); + else + xr_cdc_set_line_coding(tty, port, old_termios); xr_set_flow_mode(tty, port, old_termios); } static int xr_open(struct tty_struct *tty, struct usb_serial_port *port) { - u8 gpio_dir; int ret; + ret = xr_fifo_reset(port); + if (ret) + return ret; + ret = xr_uart_enable(port); if (ret) { dev_err(&port->dev, "Failed to enable UART\n"); return ret; } - /* - * Configure DTR and RTS as outputs and RI, CD, DSR and CTS as - * inputs. - */ - gpio_dir = XR21V141X_UART_MODE_DTR | XR21V141X_UART_MODE_RTS; - xr_set_reg_uart(port, XR21V141X_REG_GPIO_DIR, gpio_dir); - /* Setup termios */ if (tty) xr_set_termios(tty, port, NULL); @@ -545,15 +861,133 @@ static void xr_close(struct usb_serial_port *port) static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id) { - /* Don't bind to control interface */ - if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0) + struct usb_interface *control = serial->interface; + struct usb_host_interface *alt = control->cur_altsetting; + struct usb_cdc_parsed_header hdrs; + struct usb_cdc_union_desc *desc; + struct usb_interface *data; + int ret; + + ret = cdc_parse_cdc_header(&hdrs, control, alt->extra, alt->extralen); + if (ret < 0) + return -ENODEV; + + desc = hdrs.usb_cdc_union_desc; + if (!desc) + return -ENODEV; + + data = usb_ifnum_to_if(serial->dev, desc->bSlaveInterface0); + if (!data) return -ENODEV; + ret = usb_serial_claim_interface(serial, data); + if (ret) + return ret; + + usb_set_serial_data(serial, (void *)id->driver_info); + + return 0; +} + +static int xr_gpio_init(struct usb_serial_port *port, const struct xr_type *type) +{ + u16 mask, mode; + int ret; + + /* + * Configure all pins as GPIO except for Receive and Transmit Toggle. + */ + mode = 0; + if (type->have_xmit_toggle) + mode |= XR_GPIO_MODE_RX_TOGGLE | XR_GPIO_MODE_TX_TOGGLE; + + ret = xr_set_reg_uart(port, type->gpio_mode, mode); + if (ret) + return ret; + + /* + * Configure DTR and RTS as outputs and make sure they are deasserted + * (active low), and configure RI, CD, DSR and CTS as inputs. + */ + mask = XR_GPIO_DTR | XR_GPIO_RTS; + ret = xr_set_reg_uart(port, type->gpio_direction, mask); + if (ret) + return ret; + + ret = xr_set_reg_uart(port, type->gpio_set, mask); + if (ret) + return ret; + return 0; } +static int xr_port_probe(struct usb_serial_port *port) +{ + struct usb_interface_descriptor *desc; + const struct xr_type *type; + struct xr_data *data; + enum xr_type_id type_id; + int ret; + + type_id = (int)(unsigned long)usb_get_serial_data(port->serial); + type = &xr_types[type_id]; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->type = type; + + desc = &port->serial->interface->cur_altsetting->desc; + if (type_id == XR21V141X) + data->channel = desc->bInterfaceNumber / 2; + else + data->channel = desc->bInterfaceNumber; + + usb_set_serial_port_data(port, data); + + if (type->custom_driver) { + ret = xr_set_reg_uart(port, type->custom_driver, + XR_CUSTOM_DRIVER_ACTIVE); + if (ret) + goto err_free; + } + + ret = xr_gpio_init(port, type); + if (ret) + goto err_free; + + return 0; + +err_free: + kfree(data); + + return ret; +} + +static void xr_port_remove(struct usb_serial_port *port) +{ + struct xr_data *data = usb_get_serial_port_data(port); + + kfree(data); +} + +#define XR_DEVICE(vid, pid, type) \ + USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_COMM), \ + .driver_info = (type) + static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */ + { XR_DEVICE(0x04e2, 0x1400, XR2280X) }, + { XR_DEVICE(0x04e2, 0x1401, XR2280X) }, + { XR_DEVICE(0x04e2, 0x1402, XR2280X) }, + { XR_DEVICE(0x04e2, 0x1403, XR2280X) }, + { XR_DEVICE(0x04e2, 0x1410, XR21V141X) }, + { XR_DEVICE(0x04e2, 0x1411, XR21B1411) }, + { XR_DEVICE(0x04e2, 0x1412, XR21V141X) }, + { XR_DEVICE(0x04e2, 0x1414, XR21V141X) }, + { XR_DEVICE(0x04e2, 0x1420, XR21B142X) }, + { XR_DEVICE(0x04e2, 0x1422, XR21B142X) }, + { XR_DEVICE(0x04e2, 0x1424, XR21B142X) }, { } }; MODULE_DEVICE_TABLE(usb, id_table); @@ -566,6 +1000,8 @@ static struct usb_serial_driver xr_device = { .id_table = id_table, .num_ports = 1, .probe = xr_probe, + .port_probe = xr_port_probe, + .port_remove = xr_port_remove, .open = xr_open, .close = xr_close, .break_ctl = xr_break_ctl, diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 952272002e48..8c63fa9bfc74 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -130,6 +130,8 @@ static inline void usb_set_serial_port_data(struct usb_serial_port *port, * @dev: pointer to the struct usb_device for this device * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device + * @sibling: pointer to the struct usb_interface of any sibling interface + * @suspend_count: number of suspended (sibling) interfaces * @num_ports: the number of ports this device has * @num_interrupt_in: number of interrupt in endpoints we have * @num_interrupt_out: number of interrupt out endpoints we have @@ -145,8 +147,9 @@ struct usb_serial { struct usb_device *dev; struct usb_serial_driver *type; struct usb_interface *interface; + struct usb_interface *sibling; + unsigned int suspend_count; unsigned char disconnected:1; - unsigned char suspending:1; unsigned char attached:1; unsigned char minors_reserved:1; unsigned char num_ports; @@ -276,7 +279,7 @@ struct usb_serial_driver { int (*write_room)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); - int (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); + void (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); int (*set_serial)(struct tty_struct *tty, struct serial_struct *ss); void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); @@ -335,6 +338,9 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} /* Functions needed by other parts of the usbserial core */ struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); void usb_serial_put(struct usb_serial *serial); + +int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf); + int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); int usb_serial_generic_write_start(struct usb_serial_port *port, gfp_t mem_flags); int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, |