Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...

64 files changed, 2795 insertions, 251 deletions

diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
index 667c9bde8699..80152cb567d9 100644
--- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -1,18 +1,19 @@
-CFI or JEDEC memory-mapped NOR flash
+CFI or JEDEC memory-mapped NOR flash, MTD-RAM (NVRAM...)
 
 Flash chips (Memory Technology Devices) are often used for solid state
 file systems on embedded devices.
 
- - compatible : should contain the specific model of flash chip(s)
-   used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range(s) of the flash chip(s)
+ - compatible : should contain the specific model of mtd chip(s)
+   used, if known, followed by either "cfi-flash", "jedec-flash"
+   or "mtd-ram".
+ - reg : Address range(s) of the mtd chip(s)
    It's possible to (optionally) define multiple "reg" tuples so that
-   non-identical NOR chips can be described in one flash node.
- - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   non-identical chips can be described in one node.
+ - bank-width : Width (in bytes) of the bank.  Equal to the
    device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip.  If
+ - device-width : (optional) Width of a single mtd chip.  If
    omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
+ - #address-cells, #size-cells : Must be present if the device has
    sub-nodes representing partitions (see below).  In this case
    both #address-cells and #size-cells must be equal to 1.
 
@@ -22,24 +23,24 @@ are defined:
  - vendor-id : Contains the flash chip's vendor id (1 byte).
  - device-id : Contains the flash chip's device id (1 byte).
 
-In addition to the information on the flash bank itself, the
+In addition to the information on the mtd bank itself, the
 device tree may optionally contain additional information
-describing partitions of the flash address space.  This can be
+describing partitions of the address space.  This can be
 used on platforms which have strong conventions about which
-portions of the flash are used for what purposes, but which don't
+portions of a flash are used for what purposes, but which don't
 use an on-flash partition table such as RedBoot.
 
-Each partition is represented as a sub-node of the flash device.
+Each partition is represented as a sub-node of the mtd device.
 Each node's name represents the name of the corresponding
-partition of the flash device.
+partition of the mtd device.
 
 Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
+ - reg : The partition's offset and size within the mtd bank.
+ - label : (optional) The label / name for this partition.
    If omitted, the label is taken from the node name (excluding
    the unit address).
  - read-only : (optional) This parameter, if present, is a hint to
-   Linux that this flash partition should only be mounted
+   Linux that this partition should only be mounted
    read-only.  This is usually used for flash partitions
    containing early-boot firmware images or data which should not
    be clobbered.
@@ -78,3 +79,12 @@ Here an example with multiple "reg" tuples:
 			reg = <0 0x04000000>;
 		};
 	};
+
+An example using SRAM:
+
+	sram@2,0 {
+		compatible = "samsung,k6f1616u6a", "mtd-ram";
+		reg = <2 0 0x00200000>;
+		bank-width = <2>;
+	};
+
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 9bb45b932f04..600cb270f2bf 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_ECC_SMC=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 79bdea943eb4..6bfd537d5afb 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,12 +16,164 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 #include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
 #include "clock.h"
 
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+	{
+		.name = "nand_addr",
+		.start = NAND_IO_ADDR,
+		.end = NAND_IO_ADDR + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = NAND_IO_CMD,
+		.end = NAND_IO_CMD + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_data",
+		.start = NAND_IO_DATA,
+		.end = NAND_IO_DATA + 0xfff,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static int nhk8815_nand_init(void)
+{
+	/* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+	writel(0x0000000E, FSMC_PCR(0));
+	writel(0x000D0A00, FSMC_PMEM(0));
+	writel(0x00100A00, FSMC_PATT(0));
+
+	/* enable access to the chip select area */
+	writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+	return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+	{
+		.name	= "X-Loader(NAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M,
+	}, {
+		.name	= "Kernel zImage(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 3 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(NAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+	.parts		= nhk8815_partitions,
+	.nparts		= ARRAY_SIZE(nhk8815_partitions),
+	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+	.init		= nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+	.name		= "nomadik_nand",
+	.dev		= {
+		.platform_data = &nhk8815_nand_data,
+	},
+	.resource	= nhk8815_nand_resources,
+	.num_resources	= ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+/* These are the partitions for the OneNand device, different from above */
+static struct mtd_partition nhk8815_onenand_partitions[] = {
+	{
+		.name	= "X-Loader(OneNAND)",
+		.offset = 0,
+		.size	= SZ_256K,
+	}, {
+		.name	= "MemInit(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	}, {
+		.name	= "BootLoader(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_2M-SZ_256K,
+	}, {
+		.name	= "SysImage(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "Root Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 22 * SZ_1M,
+	}, {
+		.name	= "User Filesystem(OneNAND)",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct flash_platform_data nhk8815_onenand_data = {
+	.parts		= nhk8815_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
+};
+
+static struct resource nhk8815_onenand_resource[] = {
+	{
+		.start		= 0x30000000,
+		.end		= 0x30000000 + SZ_128K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nhk8815_onenand_device = {
+	.name		= "onenand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &nhk8815_onenand_data,
+	},
+	.resource	= nhk8815_onenand_resource,
+	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
+};
+
+static void __init nhk8815_onenand_init(void)
+{
+#ifdef CONFIG_ONENAND
+       /* Set up SMCS0 for OneNand */
+       writel(0x000030db, FSMC_BCR0);
+       writel(0x02100551, FSMC_BTR0);
+#endif
+}
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -81,6 +233,8 @@ static int __init nhk8815_eth_init(void)
 device_initcall(nhk8815_eth_init);
 
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	&nhk8815_nand_device,
+	&nhk8815_onenand_device,
 	&nhk8815_eth_device,
 	/* will add more devices */
 };
@@ -90,6 +244,7 @@ static void __init nhk8815_platform_init(void)
 	int i;
 
 	cpu8815_platform_init();
+	nhk8815_onenand_init();
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
new file mode 100644
index 000000000000..8c2c05183685
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/fsmc.h
@@ -0,0 +1,29 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)     (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)     (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
+/* PC-card and NAND:
+ * PCR = control register
+ * PMEM = memory timing
+ * PATT = attribute timing
+ * PIO = I/O timing
+ * PECCR = ECC result
+ */
+#define FSMC_PCR(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
+#define FSMC_PMEM(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
+#define FSMC_PATT(x)    (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
+#define FSMC_PIO(x)     (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
+#define FSMC_PECCR(x)   (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
+
+#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
new file mode 100644
index 000000000000..c3c8254c22a5
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/nand.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+	struct mtd_partition *parts;
+	int nparts;
+	int options;
+	int (*init) (void);
+	int (*exit) (void);
+};
+
+#define NAND_IO_DATA	0x40000000
+#define NAND_IO_CMD	0x40800000
+#define NAND_IO_ADDR	0x41000000
+
+#endif				/* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7a2b54c7291a..a1132288c701 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -87,7 +87,7 @@ static struct mtd_partition apollon_partitions[] = {
 	},
 };
 
-static struct flash_platform_data apollon_flash_data = {
+static struct onenand_platform_data apollon_flash_data = {
 	.parts		= apollon_partitions,
 	.nr_parts	= ARRAY_SIZE(apollon_partitions),
 };
@@ -99,7 +99,7 @@ static struct resource apollon_flash_resource[] = {
 };
 
 static struct platform_device apollon_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &apollon_flash_data,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f91934b2b092..15876828db23 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -57,6 +57,11 @@
 #define GPMC_CHUNK_SHIFT	24		/* 16 MB */
 #define GPMC_SECTION_SHIFT	28		/* 128 MB */
 
+#define PREFETCH_FIFOTHRESHOLD	(0x40 << 8)
+#define CS_NUM_SHIFT		24
+#define ENABLE_PREFETCH		(0x1 << 7)
+#define DMA_MPU_MODE		2
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -386,6 +391,63 @@ void gpmc_cs_free(int cs)
 }
 EXPORT_SYMBOL(gpmc_cs_free);
 
+/**
+ * gpmc_prefetch_enable - configures and starts prefetch transfer
+ * @cs: nand cs (chip select) number
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+int gpmc_prefetch_enable(int cs, int dma_mode,
+				unsigned int u32_count, int is_write)
+{
+	uint32_t prefetch_config1;
+
+	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
+		/* Set the amount of bytes to be prefetched */
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
+
+		/* Set dma/mpu mode, the prefetch read / post write and
+		 * enable the engine. Set which cs is has requested for.
+		 */
+		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+					PREFETCH_FIFOTHRESHOLD |
+					ENABLE_PREFETCH |
+					(dma_mode << DMA_MPU_MODE) |
+					(0x1 & is_write));
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+	} else {
+		return -EBUSY;
+	}
+	/*  Start the prefetch engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
+
+	return 0;
+}
+EXPORT_SYMBOL(gpmc_prefetch_enable);
+
+/**
+ * gpmc_prefetch_reset - disables and stops the prefetch engine
+ */
+void gpmc_prefetch_reset(void)
+{
+	/* Stop the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
+
+	/* Reset/disable the PFPW engine */
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
+}
+EXPORT_SYMBOL(gpmc_prefetch_reset);
+
+/**
+ * gpmc_prefetch_status - reads prefetch status of engine
+ */
+int  gpmc_prefetch_status(void)
+{
+	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+}
+EXPORT_SYMBOL(gpmc_prefetch_status);
+
 static void __init gpmc_mem_init(void)
 {
 	int cs;
@@ -452,6 +514,5 @@ void __init gpmc_init(void)
 	l &= 0x03 << 3;
 	l |= (0x02 << 3) | (1 << 0);
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
-
 	gpmc_mem_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 921b16532ff5..9c99cda77ba6 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -103,6 +103,10 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int dma_mode,
+					unsigned int u32_count, int is_write);
+extern void gpmc_prefetch_reset(void);
+extern int gpmc_prefetch_status(void);
 extern void __init gpmc_init(void);
 
 #endif
diff --git a/drivers/Makefile b/drivers/Makefile
index ccfa259fa848..6ee53c7a57a1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -43,6 +43,8 @@ obj-y				+= macintosh/
 obj-$(CONFIG_IDE)		+= ide/
 obj-$(CONFIG_SCSI)		+= scsi/
 obj-$(CONFIG_ATA)		+= ata/
+obj-$(CONFIG_MTD)		+= mtd/
+obj-$(CONFIG_SPI)		+= spi/
 obj-y				+= net/
 obj-$(CONFIG_ATM)		+= atm/
 obj-$(CONFIG_FUSION)		+= message/
@@ -51,8 +53,6 @@ obj-y				+= ieee1394/
 obj-$(CONFIG_UIO)		+= uio/
 obj-y				+= cdrom/
 obj-y				+= auxdisplay/
-obj-$(CONFIG_MTD)		+= mtd/
-obj-$(CONFIG_SPI)		+= spi/
 obj-$(CONFIG_PCCARD)		+= pcmcia/
 obj-$(CONFIG_DIO)		+= dio/
 obj-$(CONFIG_SBUS)		+= sbus/
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index b8e35a0b4d72..e4ec3659759a 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -25,6 +25,14 @@ config MTD_DEBUG_VERBOSE
 	help
 	  Determines the verbosity level of the MTD debugging messages.
 
+config MTD_TESTS
+	tristate "MTD tests support"
+	depends on m
+	help
+	  This option includes various MTD tests into compilation. The tests
+	  should normally be compiled as kernel modules. The modules perform
+	  various checks and verifications when loaded.
+
 config MTD_CONCAT
 	tristate "MTD concatenating support"
 	help
@@ -45,14 +53,6 @@ config MTD_PARTITIONS
 	  devices. Partitioning on NFTL 'devices' is a different - that's the
 	  'normal' form of partitioning used on a block device.
 
-config MTD_TESTS
-	tristate "MTD tests support"
-	depends on m
-	help
-	  This option includes various MTD tests into compilation. The tests
-	  should normally be compiled as kernel modules. The modules perform
-	  various checks and verifications when loaded.
-
 config MTD_REDBOOT_PARTS
 	tristate "RedBoot partition table parsing"
 	depends on MTD_PARTITIONS
diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c
index d072ca5be689..cec7ab98b2a9 100644
--- a/drivers/mtd/afs.c
+++ b/drivers/mtd/afs.c
@@ -239,7 +239,7 @@ static int parse_afs_partitions(struct mtd_info *mtd,
 		parts[idx].offset	= img_ptr;
 		parts[idx].mask_flags	= 0;
 
-		printk("  mtd%d: at 0x%08x, %5dKB, %8u, %s\n",
+		printk("  mtd%d: at 0x%08x, %5lluKiB, %8u, %s\n",
 			idx, img_ptr, parts[idx].size / 1024,
 			iis.imageNumber, str);
 
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index 61ea833e0908..94bb61e19047 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -282,16 +282,6 @@ static void fixup_s29gl032n_sectors(struct mtd_info *mtd, void *param)
 	}
 }
 
-static void fixup_M29W128G_write_buffer(struct mtd_info *mtd, void *param)
-{
-	struct map_info *map = mtd->priv;
-	struct cfi_private *cfi = map->fldrv_priv;
-	if (cfi->cfiq->BufWriteTimeoutTyp) {
-		pr_warning("Don't use write buffer on ST flash M29W128G\n");
-		cfi->cfiq->BufWriteTimeoutTyp = 0;
-	}
-}
-
 static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
 #ifdef AMD_BOOTLOC_BUG
@@ -308,7 +298,6 @@ static struct cfi_fixup cfi_fixup_table[] = {
 	{ CFI_MFR_AMD, 0x1301, fixup_s29gl064n_sectors, NULL, },
 	{ CFI_MFR_AMD, 0x1a00, fixup_s29gl032n_sectors, NULL, },
 	{ CFI_MFR_AMD, 0x1a01, fixup_s29gl032n_sectors, NULL, },
-	{ CFI_MFR_ST,  0x227E, fixup_M29W128G_write_buffer, NULL, },
 #if !FORCE_WORD_WRITE
 	{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
 #endif
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 34d40e25d312..c5a84fda5410 100644..100755
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -81,6 +81,10 @@ void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
 {
 	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 	cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
+	/* M29W128G flashes require an additional reset command
+	   when exit qry mode */
+	if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
+		cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
 }
 EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
 
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index ccc4cfc7e4b5..736a3be265f2 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -111,6 +111,11 @@
 #define I28F320B3B	0x8897
 #define I28F640B3T	0x8898
 #define I28F640B3B	0x8899
+#define I28F640C3B	0x88CD
+#define I28F160F3T	0x88F3
+#define I28F160F3B	0x88F4
+#define I28F160C3T	0x88C2
+#define I28F160C3B	0x88C3
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
 
@@ -150,6 +155,7 @@
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080
 #define M50FLW080B	0x0081
+#define PSD4256G6V	0x00e9
 
 /* SST */
 #define SST29EE020	0x0010
@@ -201,6 +207,7 @@ enum uaddr {
 	MTD_UADDR_0x0555_0x02AA,
 	MTD_UADDR_0x0555_0x0AAA,
 	MTD_UADDR_0x5555_0x2AAA,
+	MTD_UADDR_0x0AAA_0x0554,
 	MTD_UADDR_0x0AAA_0x0555,
 	MTD_UADDR_0xAAAA_0x5555,
 	MTD_UADDR_DONT_CARE,		/* Requires an arbitrary address */
@@ -245,6 +252,11 @@ static const struct unlock_addr  unlock_addrs[] = {
 		.addr2 = 0x2aaa
 	},
 
+	[MTD_UADDR_0x0AAA_0x0554] = {
+		.addr1 = 0x0AAA,
+		.addr2 = 0x0554
+	},
+
 	[MTD_UADDR_0x0AAA_0x0555] = {
 		.addr1 = 0x0AAA,
 		.addr2 = 0x0555
@@ -1103,6 +1115,19 @@ static const struct amd_flash_info jedec_table[] = {
 		}
 	}, {
 		.mfr_id		= MANUFACTURER_INTEL,
+		.dev_id		= I28F640C3B,
+		.name		= "Intel 28F640C3B",
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_UNNECESSARY,
+		.dev_size	= SIZE_8MiB,
+		.cmd_set	= P_ID_INTEL_STD,
+		.nr_regions	= 2,
+		.regions	= {
+			ERASEINFO(0x02000, 8),
+			ERASEINFO(0x10000, 127),
+		}
+	}, {
+		.mfr_id		= MANUFACTURER_INTEL,
 		.dev_id		= I82802AB,
 		.name		= "Intel 82802AB",
 		.devtypes	= CFI_DEVICETYPE_X8,
@@ -1156,8 +1181,8 @@ static const struct amd_flash_info jedec_table[] = {
 		.mfr_id		= MANUFACTURER_NEC,
 		.dev_id		= UPD29F064115,
 		.name		= "NEC uPD29F064115",
-		.devtypes	= CFI_DEVICETYPE_X16|CFI_DEVICETYPE_X8,
-		.uaddr		= MTD_UADDR_0x0555_0x02AA,	/* ???? */
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0xAAAA_0x5555,
 		.dev_size	= SIZE_8MiB,
 		.cmd_set	= P_ID_AMD_STD,
 		.nr_regions	= 3,
@@ -1726,6 +1751,18 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x1000,16),
 		}
 	}, {
+		.mfr_id		= 0xff00 | MANUFACTURER_ST,
+		.dev_id		= 0xff00 | PSD4256G6V,
+		.name		= "ST PSD4256G6V",
+		.devtypes	= CFI_DEVICETYPE_X16,
+		.uaddr		= MTD_UADDR_0x0AAA_0x0554,
+		.dev_size	= SIZE_1MiB,
+		.cmd_set	= P_ID_AMD_STD,
+		.nr_regions	= 1,
+		.regions	= {
+			ERASEINFO(0x10000,16),
+		}
+	}, {
 		.mfr_id		= MANUFACTURER_TOSHIBA,
 		.dev_id		= TC58FVT160,
 		.name		= "Toshiba TC58FVT160",
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 325fab92a62c..c222514bb70d 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -104,6 +104,16 @@ config M25PXX_USE_FAST_READ
 	help
 	  This option enables FAST_READ access supported by ST M25Pxx.
 
+config MTD_SST25L
+	tristate "Support SST25L (non JEDEC) SPI Flash chips"
+	depends on SPI_MASTER
+	help
+	  This enables access to the non JEDEC SST25L SPI flash chips, used
+	  for program and data storage.
+
+	  Set up your spi devices with the right board-specific platform data,
+	  if you want to specify device partitioning.
+
 config MTD_SLRAM
 	tristate "Uncached system RAM"
 	help
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0993d5cf3923..ab5c9b92ac82 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
+obj-$(CONFIG_MTD_SST25L)	+= sst25l.o
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 578de1c67bfe..f4359fe7150f 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -393,7 +393,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
 	* erase range is aligned with the erase size which is in
 	* effect here.
 	*/
-   if (instr->addr & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+   if (i < 0 || (instr->addr & (mtd->eraseregions[i].erasesize - 1)))
+      return -EINVAL;
 
    /* Remember the erase region we start on */
    first = i;
@@ -409,7 +410,8 @@ static int flash_erase (struct mtd_info *mtd,struct erase_info *instr)
    i--;
 
    /* is the end aligned on a block boundary? */
-   if ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)) return (-EINVAL);
+   if (i < 0 || ((instr->addr + instr->len) & (mtd->eraseregions[i].erasesize - 1)))
+      return -EINVAL;
 
    addr = instr->addr;
    len = instr->len;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index eb495d83064f..379c316f329e 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -44,6 +44,11 @@
 #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
 
+/* Used for SST flashes only. */
+#define	OPCODE_BP		0x02	/* Byte program */
+#define	OPCODE_WRDI		0x04	/* Write disable */
+#define	OPCODE_AAI_WP		0xad	/* Auto address increment word program */
+
 /* Status Register bits. */
 #define	SR_WIP			1	/* Write in progress */
 #define	SR_WEL			2	/* Write enable latch */
@@ -132,6 +137,15 @@ static inline int write_enable(struct m25p *flash)
 	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
 }
 
+/*
+ * Send write disble instruction to the chip.
+ */
+static inline int write_disable(struct m25p *flash)
+{
+	u8	code = OPCODE_WRDI;
+
+	return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
+}
 
 /*
  * Service routine to read status register until ready, or timeout occurs.
@@ -454,6 +468,111 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return 0;
 }
 
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+		size_t *retlen, const u_char *buf)
+{
+	struct m25p *flash = mtd_to_m25p(mtd);
+	struct spi_transfer t[2];
+	struct spi_message m;
+	size_t actual;
+	int cmd_sz, ret;
+
+	if (retlen)
+		*retlen = 0;
+
+	/* sanity checks */
+	if (!len)
+		return 0;
+
+	if (to + len > flash->mtd.size)
+		return -EINVAL;
+
+	spi_message_init(&m);
+	memset(t, 0, (sizeof t));
+
+	t[0].tx_buf = flash->command;
+	t[0].len = CMD_SIZE;
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	spi_message_add_tail(&t[1], &m);
+
+	mutex_lock(&flash->lock);
+
+	/* Wait until finished previous write command. */
+	ret = wait_till_ready(flash);
+	if (ret)
+		goto time_out;
+
+	write_enable(flash);
+
+	actual = to % 2;
+	/* Start write from odd address. */
+	if (actual) {
+		flash->command[0] = OPCODE_BP;
+		flash->command[1] = to >> 16;
+		flash->command[2] = to >> 8;
+		flash->command[3] = to;
+
+		/* write one byte. */
+		t[1].len = 1;
+		spi_sync(flash->spi, &m);
+		ret = wait_till_ready(flash);
+		if (ret)
+			goto time_out;
+		*retlen += m.actual_length - CMD_SIZE;
+	}
+	to += actual;
+
+	flash->command[0] = OPCODE_AAI_WP;
+	flash->command[1] = to >> 16;
+	flash->command[2] = to >> 8;
+	flash->command[3] = to;
+
+	/* Write out most of the data here. */
+	cmd_sz = CMD_SIZE;
+	for (; actual < len - 1; actual += 2) {
+		t[0].len = cmd_sz;
+		/* write two bytes. */
+		t[1].len = 2;
+		t[1].tx_buf = buf + actual;
+
+		spi_sync(flash->spi, &m);
+		ret = wait_till_ready(flash);
+		if (ret)
+			goto time_out;
+		*retlen += m.actual_length - cmd_sz;
+		cmd_sz = 1;
+		to += 2;
+	}
+	write_disable(flash);
+	ret = wait_till_ready(flash);
+	if (ret)
+		goto time_out;
+
+	/* Write out trailing byte if it exists. */
+	if (actual != len) {
+		write_enable(flash);
+		flash->command[0] = OPCODE_BP;
+		flash->command[1] = to >> 16;
+		flash->command[2] = to >> 8;
+		flash->command[3] = to;
+		t[0].len = CMD_SIZE;
+		t[1].len = 1;
+		t[1].tx_buf = buf + actual;
+
+		spi_sync(flash->spi, &m);
+		ret = wait_till_ready(flash);
+		if (ret)
+			goto time_out;
+		*retlen += m.actual_length - CMD_SIZE;
+		write_disable(flash);
+	}
+
+time_out:
+	mutex_unlock(&flash->lock);
+	return ret;
+}
 
 /****************************************************************************/
 
@@ -501,7 +620,10 @@ static struct flash_info __devinitdata m25p_data [] = {
 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
 
 	/* Macronix */
+	{ "mx25l3205d", 0xc22016, 0, 64 * 1024, 64, },
+	{ "mx25l6405d", 0xc22017, 0, 64 * 1024, 128, },
 	{ "mx25l12805d", 0xc22018, 0, 64 * 1024, 256, },
+	{ "mx25l12855e", 0xc22618, 0, 64 * 1024, 256, },
 
 	/* Spansion -- single (large) sector size only, at least
 	 * for the chips listed here (without boot sectors).
@@ -511,14 +633,20 @@ static struct flash_info __devinitdata m25p_data [] = {
 	{ "s25sl016a", 0x010214, 0, 64 * 1024, 32, },
 	{ "s25sl032a", 0x010215, 0, 64 * 1024, 64, },
 	{ "s25sl064a", 0x010216, 0, 64 * 1024, 128, },
-        { "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
+	{ "s25sl12800", 0x012018, 0x0300, 256 * 1024, 64, },
 	{ "s25sl12801", 0x012018, 0x0301, 64 * 1024, 256, },
+	{ "s25fl129p0", 0x012018, 0x4d00, 256 * 1024, 64, },
+	{ "s25fl129p1", 0x012018, 0x4d01, 64 * 1024, 256, },
 
 	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
 	{ "sst25vf040b", 0xbf258d, 0, 64 * 1024, 8, SECT_4K, },
 	{ "sst25vf080b", 0xbf258e, 0, 64 * 1024, 16, SECT_4K, },
 	{ "sst25vf016b", 0xbf2541, 0, 64 * 1024, 32, SECT_4K, },
 	{ "sst25vf032b", 0xbf254a, 0, 64 * 1024, 64, SECT_4K, },
+	{ "sst25wf512",  0xbf2501, 0, 64 * 1024, 1, SECT_4K, },
+	{ "sst25wf010",  0xbf2502, 0, 64 * 1024, 2, SECT_4K, },
+	{ "sst25wf020",  0xbf2503, 0, 64 * 1024, 4, SECT_4K, },
+	{ "sst25wf040",  0xbf2504, 0, 64 * 1024, 8, SECT_4K, },
 
 	/* ST Microelectronics -- newer production may have feature updates */
 	{ "m25p05",  0x202010,  0, 32 * 1024, 2, },
@@ -667,7 +795,12 @@ static int __devinit m25p_probe(struct spi_device *spi)
 	flash->mtd.size = info->sector_size * info->n_sectors;
 	flash->mtd.erase = m25p80_erase;
 	flash->mtd.read = m25p80_read;
-	flash->mtd.write = m25p80_write;
+
+	/* sst flash chips use AAI word program */
+	if (info->jedec_id >> 16 == 0xbf)
+		flash->mtd.write = sst_write;
+	else
+		flash->mtd.write = m25p80_write;
 
 	/* prefer "small sector" erase if possible */
 	if (info->flags & SECT_4K) {
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 211c27acd01e..93e3627be74c 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -401,7 +401,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		(void) dataflash_waitready(priv->spi);
 
 
-#ifdef CONFIG_MTD_DATAFLASH_VERIFY_WRITE
+#ifdef CONFIG_MTD_DATAFLASH_WRITE_VERIFY
 
 		/* (3) Compare to Buffer1 */
 		addr = pageaddr << priv->page_offset;
@@ -430,7 +430,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		} else
 			status = 0;
 
-#endif	/* CONFIG_MTD_DATAFLASH_VERIFY_WRITE */
+#endif	/* CONFIG_MTD_DATAFLASH_WRITE_VERIFY */
 
 		remaining = remaining - writelen;
 		pageaddr++;
diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c
index 088fbb7595b5..1696bbecaa7e 100644
--- a/drivers/mtd/devices/phram.c
+++ b/drivers/mtd/devices/phram.c
@@ -14,6 +14,9 @@
  * Example:
  *	phram=swap,64Mi,128Mi phram=test,900Mi,1Mi
  */
+
+#define pr_fmt(fmt) "phram: " fmt
+
 #include <asm/io.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -23,8 +26,6 @@
 #include <linux/slab.h>
 #include <linux/mtd/mtd.h>
 
-#define ERROR(fmt, args...) printk(KERN_ERR "phram: " fmt , ## args)
-
 struct phram_mtd_list {
 	struct mtd_info mtd;
 	struct list_head list;
@@ -132,7 +133,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 	ret = -EIO;
 	new->mtd.priv = ioremap(start, len);
 	if (!new->mtd.priv) {
-		ERROR("ioremap failed\n");
+		pr_err("ioremap failed\n");
 		goto out1;
 	}
 
@@ -152,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len)
 
 	ret = -EAGAIN;
 	if (add_mtd_device(&new->mtd)) {
-		ERROR("Failed to register new device\n");
+		pr_err("Failed to register new device\n");
 		goto out2;
 	}
 
@@ -227,8 +228,8 @@ static inline void kill_final_newline(char *str)
 
 
 #define parse_err(fmt, args...) do {	\
-	ERROR(fmt , ## args);	\
-	return 0;		\
+	pr_err(fmt , ## args);	\
+	return 1;		\
 } while (0)
 
 static int phram_setup(const char *val, struct kernel_param *kp)
@@ -256,12 +257,8 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 		parse_err("not enough arguments\n");
 
 	ret = parse_name(&name, token[0]);
-	if (ret == -ENOMEM)
-		parse_err("out of memory\n");
-	if (ret == -ENOSPC)
-		parse_err("name too long\n");
 	if (ret)
-		return 0;
+		return ret;
 
 	ret = parse_num32(&start, token[1]);
 	if (ret) {
@@ -275,9 +272,11 @@ static int phram_setup(const char *val, struct kernel_param *kp)
 		parse_err("illegal device length\n");
 	}
 
-	register_device(name, start, len);
+	ret = register_device(name, start, len);
+	if (!ret)
+		pr_info("%s device: %#x at %#x\n", name, len, start);
 
-	return 0;
+	return ret;
 }
 
 module_param_call(phram, phram_setup, NULL, NULL, 000);
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 7d846e9173da..3aa05cd18ea1 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -341,7 +341,7 @@ static int __init init_slram(void)
 #else
 	int count;
 
-	for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS);
+	for (count = 0; count < SLRAM_MAX_DEVICES_PARAMS && map[count];
 			count++) {
 	}
 
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
new file mode 100644
index 000000000000..c2baf3353f84
--- /dev/null
+++ b/drivers/mtd/devices/sst25l.c
@@ -0,0 +1,512 @@
+/*
+ * sst25l.c
+ *
+ * Driver for SST25L SPI Flash chips
+ *
+ * Copyright © 2009 Bluewater Systems Ltd
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on m25p80.c
+ *
+ * This code is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+/* Erases can take up to 3 seconds! */
+#define MAX_READY_WAIT_JIFFIES	msecs_to_jiffies(3000)
+
+#define SST25L_CMD_WRSR		0x01	/* Write status register */
+#define SST25L_CMD_WRDI		0x04	/* Write disable */
+#define SST25L_CMD_RDSR		0x05	/* Read status register */
+#define SST25L_CMD_WREN		0x06	/* Write enable */
+#define SST25L_CMD_READ		0x03	/* High speed read */
+
+#define SST25L_CMD_EWSR		0x50	/* Enable write status register */
+#define SST25L_CMD_SECTOR_ERASE	0x20	/* Erase sector */
+#define SST25L_CMD_READ_ID	0x90	/* Read device ID */
+#define SST25L_CMD_AAI_PROGRAM	0xaf	/* Auto address increment */
+
+#define SST25L_STATUS_BUSY	(1 << 0)	/* Chip is busy */
+#define SST25L_STATUS_WREN	(1 << 1)	/* Write enabled */
+#define SST25L_STATUS_BP0	(1 << 2)	/* Block protection 0 */
+#define SST25L_STATUS_BP1	(1 << 3)	/* Block protection 1 */
+
+struct sst25l_flash {
+	struct spi_device	*spi;
+	struct mutex		lock;
+	struct mtd_info		mtd;
+
+	int 			partitioned;
+};
+
+struct flash_info {
+	const char		*name;
+	uint16_t		device_id;
+	unsigned		page_size;
+	unsigned		nr_pages;
+	unsigned		erase_size;
+};
+
+#define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
+
+static struct flash_info __initdata sst25l_flash_info[] = {
+	{"sst25lf020a", 0xbf43, 256, 1024, 4096},
+	{"sst25lf040a",	0xbf44,	256, 2048, 4096},
+};
+
+static int sst25l_status(struct sst25l_flash *flash, int *status)
+{
+	unsigned char command, response;
+	int err;
+
+	command = SST25L_CMD_RDSR;
+	err = spi_write_then_read(flash->spi, &command, 1, &response, 1);
+	if (err < 0)
+		return err;
+
+	*status = response;
+	return 0;
+}
+
+static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
+{
+	unsigned char command[2];
+	int status, err;
+
+	command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
+	err = spi_write(flash->spi, command, 1);
+	if (err)
+		return err;
+
+	command[0] = SST25L_CMD_EWSR;
+	err = spi_write(flash->spi, command, 1);
+	if (err)
+		return err;
+
+	command[0] = SST25L_CMD_WRSR;
+	command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
+	err = spi_write(flash->spi, command, 2);
+	if (err)
+		return err;
+
+	if (enable) {
+		err = sst25l_status(flash, &status);
+		if (err)
+			return err;
+		if (!(status & SST25L_STATUS_WREN))
+			return -EROFS;
+	}
+
+	return 0;
+}
+
+static int sst25l_wait_till_ready(struct sst25l_flash *flash)
+{
+	unsigned long deadline;
+	int status, err;
+
+	deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+	do {
+		err = sst25l_status(flash, &status);
+		if (err)
+			return err;
+		if (!(status & SST25L_STATUS_BUSY))
+			return 0;
+
+		cond_resched();
+	} while (!time_after_eq(jiffies, deadline));
+
+	return -ETIMEDOUT;
+}
+
+static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
+{
+	unsigned char command[4];
+	int err;
+
+	err = sst25l_write_enable(flash, 1);
+	if (err)
+		return err;
+
+	command[0] = SST25L_CMD_SECTOR_ERASE;
+	command[1] = offset >> 16;
+	command[2] = offset >> 8;
+	command[3] = offset;
+	err = spi_write(flash->spi, command, 4);
+	if (err)
+		return err;
+
+	err = sst25l_wait_till_ready(flash);
+	if (err)
+		return err;
+
+	return sst25l_write_enable(flash, 0);
+}
+
+static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+	struct sst25l_flash *flash = to_sst25l_flash(mtd);
+	uint32_t addr, end;
+	int err;
+
+	/* Sanity checks */
+	if (instr->addr + instr->len > flash->mtd.size)
+		return -EINVAL;
+
+	if ((uint32_t)instr->len % mtd->erasesize)
+		return -EINVAL;
+
+	if ((uint32_t)instr->addr % mtd->erasesize)
+		return -EINVAL;
+
+	addr = instr->addr;
+	end = addr + instr->len;
+
+	mutex_lock(&flash->lock);
+
+	err = sst25l_wait_till_ready(flash);
+	if (err) {
+		mutex_unlock(&flash->lock);
+		return err;
+	}
+
+	while (addr < end) {
+		err = sst25l_erase_sector(flash, addr);
+		if (err) {
+			mutex_unlock(&flash->lock);
+			instr->state = MTD_ERASE_FAILED;
+			dev_err(&flash->spi->dev, "Erase failed\n");
+			return err;
+		}
+
+		addr += mtd->erasesize;
+	}
+
+	mutex_unlock(&flash->lock);
+
+	instr->state = MTD_ERASE_DONE;
+	mtd_erase_callback(instr);
+	return 0;
+}
+
+static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
+		       size_t *retlen, unsigned char *buf)
+{
+	struct sst25l_flash *flash = to_sst25l_flash(mtd);
+	struct spi_transfer transfer[2];
+	struct spi_message message;
+	unsigned char command[4];
+	int ret;
+
+	/* Sanity checking */
+	if (len == 0)
+		return 0;
+
+	if (from + len > flash->mtd.size)
+		return -EINVAL;
+
+	if (retlen)
+		*retlen = 0;
+
+	spi_message_init(&message);
+	memset(&transfer, 0, sizeof(transfer));
+
+	command[0] = SST25L_CMD_READ;
+	command[1] = from >> 16;
+	command[2] = from >> 8;
+	command[3] = from;
+
+	transfer[0].tx_buf = command;
+	transfer[0].len = sizeof(command);
+	spi_message_add_tail(&transfer[0], &message);
+
+	transfer[1].rx_buf = buf;
+	transfer[1].len = len;
+	spi_message_add_tail(&transfer[1], &message);
+
+	mutex_lock(&flash->lock);
+
+	/* Wait for previous write/erase to complete */
+	ret = sst25l_wait_till_ready(flash);
+	if (ret) {
+		mutex_unlock(&flash->lock);
+		return ret;
+	}
+
+	spi_sync(flash->spi, &message);
+
+	if (retlen && message.actual_length > sizeof(command))
+		*retlen += message.actual_length - sizeof(command);
+
+	mutex_unlock(&flash->lock);
+	return 0;
+}
+
+static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
+			size_t *retlen, const unsigned char *buf)
+{
+	struct sst25l_flash *flash = to_sst25l_flash(mtd);
+	int i, j, ret, bytes, copied = 0;
+	unsigned char command[5];
+
+	/* Sanity checks */
+	if (!len)
+		return 0;
+
+	if (to + len > flash->mtd.size)
+		return -EINVAL;
+
+	if ((uint32_t)to % mtd->writesize)
+		return -EINVAL;
+
+	mutex_lock(&flash->lock);
+
+	ret = sst25l_write_enable(flash, 1);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < len; i += mtd->writesize) {
+		ret = sst25l_wait_till_ready(flash);
+		if (ret)
+			goto out;
+
+		/* Write the first byte of the page */
+		command[0] = SST25L_CMD_AAI_PROGRAM;
+		command[1] = (to + i) >> 16;
+		command[2] = (to + i) >> 8;
+		command[3] = (to + i);
+		command[4] = buf[i];
+		ret = spi_write(flash->spi, command, 5);
+		if (ret < 0)
+			goto out;
+		copied++;
+
+		/*
+		 * Write the remaining bytes using auto address
+		 * increment mode
+		 */
+		bytes = min_t(uint32_t, mtd->writesize, len - i);
+		for (j = 1; j < bytes; j++, copied++) {
+			ret = sst25l_wait_till_ready(flash);
+			if (ret)
+				goto out;
+
+			command[1] = buf[i + j];
+			ret = spi_write(flash->spi, command, 2);
+			if (ret)
+				goto out;
+		}
+	}
+
+out:
+	ret = sst25l_write_enable(flash, 0);
+
+	if (retlen)
+		*retlen = copied;
+
+	mutex_unlock(&flash->lock);
+	return ret;
+}
+
+static struct flash_info *__init sst25l_match_device(struct spi_device *spi)
+{
+	struct flash_info *flash_info = NULL;
+	unsigned char command[4], response;
+	int i, err;
+	uint16_t id;
+
+	command[0] = SST25L_CMD_READ_ID;
+	command[1] = 0;
+	command[2] = 0;
+	command[3] = 0;
+	err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+	if (err < 0) {
+		dev_err(&spi->dev, "error reading device id msb\n");
+		return NULL;
+	}
+
+	id = response << 8;
+
+	command[0] = SST25L_CMD_READ_ID;
+	command[1] = 0;
+	command[2] = 0;
+	command[3] = 1;
+	err = spi_write_then_read(spi, command, sizeof(command), &response, 1);
+	if (err < 0) {
+		dev_err(&spi->dev, "error reading device id lsb\n");
+		return NULL;
+	}
+
+	id |= response;
+
+	for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
+		if (sst25l_flash_info[i].device_id == id)
+			flash_info = &sst25l_flash_info[i];
+
+	if (!flash_info)
+		dev_err(&spi->dev, "unknown id %.4x\n", id);
+
+	return flash_info;
+}
+
+static int __init sst25l_probe(struct spi_device *spi)
+{
+	struct flash_info *flash_info;
+	struct sst25l_flash *flash;
+	struct flash_platform_data *data;
+	int ret, i;
+
+	flash_info = sst25l_match_device(spi);
+	if (!flash_info)
+		return -ENODEV;
+
+	flash = kzalloc(sizeof(struct sst25l_flash), GFP_KERNEL);
+	if (!flash)
+		return -ENOMEM;
+
+	flash->spi = spi;
+	mutex_init(&flash->lock);
+	dev_set_drvdata(&spi->dev, flash);
+
+	data = spi->dev.platform_data;
+	if (data && data->name)
+		flash->mtd.name = data->name;
+	else
+		flash->mtd.name = dev_name(&spi->dev);
+
+	flash->mtd.type		= MTD_NORFLASH;
+	flash->mtd.flags	= MTD_CAP_NORFLASH;
+	flash->mtd.erasesize	= flash_info->erase_size;
+	flash->mtd.writesize	= flash_info->page_size;
+	flash->mtd.size		= flash_info->page_size * flash_info->nr_pages;
+	flash->mtd.erase	= sst25l_erase;
+	flash->mtd.read		= sst25l_read;
+	flash->mtd.write 	= sst25l_write;
+
+	dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
+		 (long long)flash->mtd.size >> 10);
+
+	DEBUG(MTD_DEBUG_LEVEL2,
+	      "mtd .name = %s, .size = 0x%llx (%lldMiB) "
+	      ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+	      flash->mtd.name,
+	      (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
+	      flash->mtd.erasesize, flash->mtd.erasesize / 1024,
+	      flash->mtd.numeraseregions);
+
+	if (flash->mtd.numeraseregions)
+		for (i = 0; i < flash->mtd.numeraseregions; i++)
+			DEBUG(MTD_DEBUG_LEVEL2,
+			      "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+			      ".erasesize = 0x%.8x (%uKiB), "
+			      ".numblocks = %d }\n",
+			      i, (long long)flash->mtd.eraseregions[i].offset,
+			      flash->mtd.eraseregions[i].erasesize,
+			      flash->mtd.eraseregions[i].erasesize / 1024,
+			      flash->mtd.eraseregions[i].numblocks);
+
+	if (mtd_has_partitions()) {
+		struct mtd_partition *parts = NULL;
+		int nr_parts = 0;
+
+		if (mtd_has_cmdlinepart()) {
+			static const char *part_probes[] =
+				{"cmdlinepart", NULL};
+
+			nr_parts = parse_mtd_partitions(&flash->mtd,
+							part_probes,
+							&parts, 0);
+		}
+
+		if (nr_parts <= 0 && data && data->parts) {
+			parts = data->parts;
+			nr_parts = data->nr_parts;
+		}
+
+		if (nr_parts > 0) {
+			for (i = 0; i < nr_parts; i++) {
+				DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = "
+				      "{.name = %s, .offset = 0x%llx, "
+				      ".size = 0x%llx (%lldKiB) }\n",
+				      i, parts[i].name,
+				      (long long)parts[i].offset,
+				      (long long)parts[i].size,
+				      (long long)(parts[i].size >> 10));
+			}
+
+			flash->partitioned = 1;
+			return add_mtd_partitions(&flash->mtd,
+						  parts, nr_parts);
+		}
+
+	} else if (data->nr_parts) {
+		dev_warn(&spi->dev, "ignoring %d default partitions on %s\n",
+			 data->nr_parts, data->name);
+	}
+
+	ret = add_mtd_device(&flash->mtd);
+	if (ret == 1) {
+		kfree(flash);
+		dev_set_drvdata(&spi->dev, NULL);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int __exit sst25l_remove(struct spi_device *spi)
+{
+	struct sst25l_flash *flash = dev_get_drvdata(&spi->dev);
+	int ret;
+
+	if (mtd_has_partitions() && flash->partitioned)
+		ret = del_mtd_partitions(&flash->mtd);
+	else
+		ret = del_mtd_device(&flash->mtd);
+	if (ret == 0)
+		kfree(flash);
+	return ret;
+}
+
+static struct spi_driver sst25l_driver = {
+	.driver = {
+		.name	= "sst25l",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= sst25l_probe,
+	.remove		= __exit_p(sst25l_remove),
+};
+
+static int __init sst25l_init(void)
+{
+	return spi_register_driver(&sst25l_driver);
+}
+
+static void __exit sst25l_exit(void)
+{
+	spi_unregister_driver(&sst25l_driver);
+}
+
+module_init(sst25l_init);
+module_exit(sst25l_exit);
+
+MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
+MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
+	      "Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c
index d8cf29c01cc4..8aca5523a337 100644..100755
--- a/drivers/mtd/inftlcore.c
+++ b/drivers/mtd/inftlcore.c
@@ -550,7 +550,7 @@ hitused:
 			 * waiting to be picked up. We're going to have to fold
 			 * a chain to make room.
 			 */
-			thisEUN = INFTL_makefreeblock(inftl, BLOCK_NIL);
+			thisEUN = INFTL_makefreeblock(inftl, block);
 
 			/*
 			 * Hopefully we free something, lets try again.
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 7a58bd5522fd..3a9a960644b6 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -484,9 +484,19 @@ config MTD_BFIN_ASYNC
 
 	  If compiled as a module, it will be called bfin-async-flash.
 
+config MTD_GPIO_ADDR
+	tristate "GPIO-assisted Flash Chip Support"
+	depends on MTD_COMPLEX_MAPPINGS
+	select MTD_PARTITIONS
+	help
+	  Map driver which allows flashes to be partially physically addressed
+	  and assisted by GPIOs.
+
+	  If compiled as a module, it will be called gpio-addr-flash.
+
 config MTD_UCLINUX
 	bool "Generic uClinux RAM/ROM filesystem support"
-	depends on MTD_PARTITIONS && MTD_RAM && !MMU
+	depends on MTD_PARTITIONS && MTD_RAM=y && !MMU
 	help
 	  Map driver to support image based filesystems for uClinux.
 
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 5beb0662d724..1d5cf8636723 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -58,5 +58,4 @@ obj-$(CONFIG_MTD_PLATRAM)	+= plat-ram.o
 obj-$(CONFIG_MTD_OMAP_NOR)	+= omap_nor.o
 obj-$(CONFIG_MTD_INTEL_VR_NOR)	+= intel_vr_nor.o
 obj-$(CONFIG_MTD_BFIN_ASYNC)	+= bfin-async-flash.o
-obj-$(CONFIG_MTD_RBTX4939)	+= rbtx4939-flash.o
-obj-$(CONFIG_MTD_VMU)		+= vmu-flash.o
+obj-$(CONFIG_MTD_GPIO_ADDR)	+= gpio-addr-flash.o
diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
new file mode 100644
index 000000000000..44ef9a49a860
--- /dev/null
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -0,0 +1,311 @@
+/*
+ * drivers/mtd/maps/gpio-addr-flash.c
+ *
+ * Handle the case where a flash device is mostly addressed using physical
+ * line and supplemented by GPIOs.  This way you can hook up say a 8MiB flash
+ * to a 2MiB memory range and use the GPIOs to select a particular range.
+ *
+ * Copyright © 2000 Nicolas Pitre <nico@cam.org>
+ * Copyright © 2005-2009 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+
+#define DRIVER_NAME "gpio-addr-flash"
+#define PFX DRIVER_NAME ": "
+
+/**
+ * struct async_state - keep GPIO flash state
+ *	@mtd:         MTD state for this mapping
+ *	@map:         MTD map state for this flash
+ *	@gpio_count:  number of GPIOs used to address
+ *	@gpio_addrs:  array of GPIOs to twiddle
+ *	@gpio_values: cached GPIO values
+ *	@win_size:    dedicated memory size (if no GPIOs)
+ */
+struct async_state {
+	struct mtd_info *mtd;
+	struct map_info map;
+	size_t gpio_count;
+	unsigned *gpio_addrs;
+	int *gpio_values;
+	unsigned long win_size;
+};
+#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
+
+/**
+ * gf_set_gpios() - set GPIO address lines to access specified flash offset
+ *	@state: GPIO flash state
+ *	@ofs:   desired offset to access
+ *
+ * Rather than call the GPIO framework every time, cache the last-programmed
+ * value.  This speeds up sequential accesses (which are by far the most common
+ * type).  We rely on the GPIO framework to treat non-zero value as high so
+ * that we don't have to normalize the bits.
+ */
+static void gf_set_gpios(struct async_state *state, unsigned long ofs)
+{
+	size_t i = 0;
+	int value;
+	ofs /= state->win_size;
+	do {
+		value = ofs & (1 << i);
+		if (state->gpio_values[i] != value) {
+			gpio_set_value(state->gpio_addrs[i], value);
+			state->gpio_values[i] = value;
+		}
+	} while (++i < state->gpio_count);
+}
+
+/**
+ * gf_read() - read a word at the specified offset
+ *	@map: MTD map state
+ *	@ofs: desired offset to read
+ */
+static map_word gf_read(struct map_info *map, unsigned long ofs)
+{
+	struct async_state *state = gf_map_info_to_state(map);
+	uint16_t word;
+	map_word test;
+
+	gf_set_gpios(state, ofs);
+
+	word = readw(map->virt + (ofs % state->win_size));
+	test.x[0] = word;
+	return test;
+}
+
+/**
+ * gf_copy_from() - copy a chunk of data from the flash
+ *	@map:  MTD map state
+ *	@to:   memory to copy to
+ *	@from: flash offset to copy from
+ *	@len:  how much to copy
+ *
+ * We rely on the MTD layer to chunk up copies such that a single request here
+ * will not cross a window size.  This allows us to only wiggle the GPIOs once
+ * before falling back to a normal memcpy.  Reading the higher layer code shows
+ * that this is indeed the case, but add a BUG_ON() to future proof.
+ */
+static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+	struct async_state *state = gf_map_info_to_state(map);
+
+	gf_set_gpios(state, from);
+
+	/* BUG if operation crosses the win_size */
+	BUG_ON(!((from + len) % state->win_size <= (from + len)));
+
+	/* operation does not cross the win_size, so one shot it */
+	memcpy_fromio(to, map->virt + (from % state->win_size), len);
+}
+
+/**
+ * gf_write() - write a word at the specified offset
+ *	@map: MTD map state
+ *	@ofs: desired offset to write
+ */
+static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
+{
+	struct async_state *state = gf_map_info_to_state(map);
+	uint16_t d;
+
+	gf_set_gpios(state, ofs);
+
+	d = d1.x[0];
+	writew(d, map->virt + (ofs % state->win_size));
+}
+
+/**
+ * gf_copy_to() - copy a chunk of data to the flash
+ *	@map:  MTD map state
+ *	@to:   flash offset to copy to
+ *	@from: memory to copy from
+ *	@len:  how much to copy
+ *
+ * See gf_copy_from() caveat.
+ */
+static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+	struct async_state *state = gf_map_info_to_state(map);
+
+	gf_set_gpios(state, to);
+
+	/* BUG if operation crosses the win_size */
+	BUG_ON(!((to + len) % state->win_size <= (to + len)));
+
+	/* operation does not cross the win_size, so one shot it */
+	memcpy_toio(map->virt + (to % state->win_size), from, len);
+}
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
+#endif
+
+/**
+ * gpio_flash_probe() - setup a mapping for a GPIO assisted flash
+ *	@pdev: platform device
+ *
+ * The platform resource layout expected looks something like:
+ * struct mtd_partition partitions[] = { ... };
+ * struct physmap_flash_data flash_data = { ... };
+ * unsigned flash_gpios[] = { GPIO_XX, GPIO_XX, ... };
+ * struct resource flash_resource[] = {
+ *	{
+ *		.name  = "cfi_probe",
+ *		.start = 0x20000000,
+ *		.end   = 0x201fffff,
+ *		.flags = IORESOURCE_MEM,
+ *	}, {
+ *		.start = (unsigned long)flash_gpios,
+ *		.end   = ARRAY_SIZE(flash_gpios),
+ *		.flags = IORESOURCE_IRQ,
+ *	}
+ * };
+ * struct platform_device flash_device = {
+ *	.name          = "gpio-addr-flash",
+ *	.dev           = { .platform_data = &flash_data, },
+ *	.num_resources = ARRAY_SIZE(flash_resource),
+ *	.resource      = flash_resource,
+ *	...
+ * };
+ */
+static int __devinit gpio_flash_probe(struct platform_device *pdev)
+{
+	int ret;
+	size_t i, arr_size;
+	struct physmap_flash_data *pdata;
+	struct resource *memory;
+	struct resource *gpios;
+	struct async_state *state;
+
+	pdata = pdev->dev.platform_data;
+	memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	gpios = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (!memory || !gpios || !gpios->end)
+		return -EINVAL;
+
+	arr_size = sizeof(int) * gpios->end;
+	state = kzalloc(sizeof(*state) + arr_size, GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	state->gpio_count     = gpios->end;
+	state->gpio_addrs     = (void *)gpios->start;
+	state->gpio_values    = (void *)(state + 1);
+	state->win_size       = memory->end - memory->start + 1;
+	memset(state->gpio_values, 0xff, arr_size);
+
+	state->map.name       = DRIVER_NAME;
+	state->map.read       = gf_read;
+	state->map.copy_from  = gf_copy_from;
+	state->map.write      = gf_write;
+	state->map.copy_to    = gf_copy_to;
+	state->map.bankwidth  = pdata->width;
+	state->map.size       = state->win_size * (1 << state->gpio_count);
+	state->map.virt       = (void __iomem *)memory->start;
+	state->map.phys       = NO_XIP;
+	state->map.map_priv_1 = (unsigned long)state;
+
+	platform_set_drvdata(pdev, state);
+
+	i = 0;
+	do {
+		if (gpio_request(state->gpio_addrs[i], DRIVER_NAME)) {
+			pr_devinit(KERN_ERR PFX "failed to request gpio %d\n",
+				state->gpio_addrs[i]);
+			while (i--)
+				gpio_free(state->gpio_addrs[i]);
+			kfree(state);
+			return -EBUSY;
+		}
+		gpio_direction_output(state->gpio_addrs[i], 0);
+	} while (++i < state->gpio_count);
+
+	pr_devinit(KERN_NOTICE PFX "probing %d-bit flash bus\n",
+		state->map.bankwidth * 8);
+	state->mtd = do_map_probe(memory->name, &state->map);
+	if (!state->mtd) {
+		for (i = 0; i < state->gpio_count; ++i)
+			gpio_free(state->gpio_addrs[i]);
+		kfree(state);
+		return -ENXIO;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
+	if (ret > 0) {
+		pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, ret);
+		kfree(pdata->parts);
+
+	} else if (pdata->nr_parts) {
+		pr_devinit(KERN_NOTICE PFX "Using board partition definition\n");
+		add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts);
+
+	} else
+#endif
+	{
+		pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n");
+		add_mtd_device(state->mtd);
+	}
+
+	return 0;
+}
+
+static int __devexit gpio_flash_remove(struct platform_device *pdev)
+{
+	struct async_state *state = platform_get_drvdata(pdev);
+	size_t i = 0;
+	do {
+		gpio_free(state->gpio_addrs[i]);
+	} while (++i < state->gpio_count);
+#ifdef CONFIG_MTD_PARTITIONS
+	del_mtd_partitions(state->mtd);
+#endif
+	map_destroy(state->mtd);
+	kfree(state);
+	return 0;
+}
+
+static struct platform_driver gpio_flash_driver = {
+	.probe		= gpio_flash_probe,
+	.remove		= __devexit_p(gpio_flash_remove),
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init gpio_flash_init(void)
+{
+	return platform_driver_register(&gpio_flash_driver);
+}
+module_init(gpio_flash_init);
+
+static void __exit gpio_flash_exit(void)
+{
+	platform_driver_unregister(&gpio_flash_driver);
+}
+module_exit(gpio_flash_exit);
+
+MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
+MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 39d357b2eb47..61e4eb48bb2d 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -190,6 +190,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	const u32 *p;
 	int reg_tuple_size;
 	struct mtd_info **mtd_list = NULL;
+	resource_size_t res_size;
 
 	reg_tuple_size = (of_n_addr_cells(dp) + of_n_size_cells(dp)) * sizeof(u32);
 
@@ -204,7 +205,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 		dev_err(&dev->dev, "Malformed reg property on %s\n",
 				dev->node->full_name);
 		err = -EINVAL;
-		goto err_out;
+		goto err_flash_remove;
 	}
 	count /= reg_tuple_size;
 
@@ -212,14 +213,14 @@ static int __devinit of_flash_probe(struct of_device *dev,
 	info = kzalloc(sizeof(struct of_flash) +
 		       sizeof(struct of_flash_list) * count, GFP_KERNEL);
 	if (!info)
-		goto err_out;
-
-	mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
-	if (!info)
-		goto err_out;
+		goto err_flash_remove;
 
 	dev_set_drvdata(&dev->dev, info);
 
+	mtd_list = kzalloc(sizeof(struct mtd_info) * count, GFP_KERNEL);
+	if (!mtd_list)
+		goto err_flash_remove;
+
 	for (i = 0; i < count; i++) {
 		err = -ENXIO;
 		if (of_address_to_resource(dp, i, &res)) {
@@ -233,8 +234,8 @@ static int __devinit of_flash_probe(struct of_device *dev,
 			(unsigned long long)res.end);
 
 		err = -EBUSY;
-		info->list[i].res = request_mem_region(res.start, res.end -
-						       res.start + 1,
+		res_size = resource_size(&res);
+		info->list[i].res = request_mem_region(res.start, res_size,
 						       dev_name(&dev->dev));
 		if (!info->list[i].res)
 			goto err_out;
@@ -249,7 +250,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
 		info->list[i].map.name = dev_name(&dev->dev);
 		info->list[i].map.phys = res.start;
-		info->list[i].map.size = res.end - res.start + 1;
+		info->list[i].map.size = res_size;
 		info->list[i].map.bankwidth = *width;
 
 		err = -ENOMEM;
@@ -338,6 +339,7 @@ static int __devinit of_flash_probe(struct of_device *dev,
 
 err_out:
 	kfree(mtd_list);
+err_flash_remove:
 	of_flash_remove(dev);
 
 	return err;
@@ -360,6 +362,10 @@ static struct of_device_id of_flash_match[] = {
 		.data		= (void *)"jedec_probe",
 	},
 	{
+		.compatible     = "mtd-ram",
+		.data           = (void *)"map_ram",
+	},
+	{
 		.type		= "rom",
 		.compatible	= "direct-mapped"
 	},
diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c
index 49c9ece76477..dafb91944e70 100644
--- a/drivers/mtd/maps/plat-ram.c
+++ b/drivers/mtd/maps/plat-ram.c
@@ -175,7 +175,7 @@ static int platram_probe(struct platform_device *pdev)
 	/* setup map parameters */
 
 	info->map.phys = res->start;
-	info->map.size = (res->end - res->start) + 1;
+	info->map.size = resource_size(res);
 	info->map.name = pdata->mapname != NULL ?
 			(char *)pdata->mapname : (char *)pdev->name;
 	info->map.bankwidth = pdata->bankwidth;
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index 4768bd5459d6..c8fd8da4bc87 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -50,7 +50,7 @@ static int fcnt;
 
 static int __init init_msp_flash(void)
 {
-	int i, j;
+	int i, j, ret = -ENOMEM;
 	int offset, coff;
 	char *env;
 	int pcnt;
@@ -75,14 +75,16 @@ static int __init init_msp_flash(void)
 	printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
 
 	msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+	if (!msp_flash)
+		return -ENOMEM;
+
 	msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+	if (!msp_parts)
+		goto free_msp_flash;
+
 	msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
-	if (!msp_flash || !msp_parts || !msp_maps) {
-		kfree(msp_maps);
-		kfree(msp_parts);
-		kfree(msp_flash);
-		return -ENOMEM;
-	}
+	if (!msp_maps)
+		goto free_msp_parts;
 
 	/* loop over the flash devices, initializing each */
 	for (i = 0; i < fcnt; i++) {
@@ -100,13 +102,18 @@ static int __init init_msp_flash(void)
 
 		msp_parts[i] = kcalloc(pcnt, sizeof(struct mtd_partition),
 				       GFP_KERNEL);
+		if (!msp_parts[i])
+			goto cleanup_loop;
 
 		/* now initialize the devices proper */
 		flash_name[5] = '0' + i;
 		env = prom_getenv(flash_name);
 
-		if (sscanf(env, "%x:%x", &addr, &size) < 2)
-			return -ENXIO;
+		if (sscanf(env, "%x:%x", &addr, &size) < 2) {
+			ret = -ENXIO;
+			kfree(msp_parts[i]);
+			goto cleanup_loop;
+		}
 		addr = CPHYSADDR(addr);
 
 		printk(KERN_NOTICE
@@ -122,13 +129,23 @@ static int __init init_msp_flash(void)
 		 */
 		if (size > CONFIG_MSP_FLASH_MAP_LIMIT)
 			size = CONFIG_MSP_FLASH_MAP_LIMIT;
+
 		msp_maps[i].virt = ioremap(addr, size);
+		if (msp_maps[i].virt == NULL) {
+			ret = -ENXIO;
+			kfree(msp_parts[i]);
+			goto cleanup_loop;
+		}
+
 		msp_maps[i].bankwidth = 1;
-		msp_maps[i].name = strncpy(kmalloc(7, GFP_KERNEL),
-					flash_name, 7);
+		msp_maps[i].name = kmalloc(7, GFP_KERNEL);
+		if (!msp_maps[i].name) {
+			iounmap(msp_maps[i].virt);
+			kfree(msp_parts[i]);
+			goto cleanup_loop;
+		}
 
-		if (msp_maps[i].virt == NULL)
-			return -ENXIO;
+		msp_maps[i].name = strncpy(msp_maps[i].name, flash_name, 7);
 
 		for (j = 0; j < pcnt; j++) {
 			part_name[5] = '0' + i;
@@ -136,8 +153,14 @@ static int __init init_msp_flash(void)
 
 			env = prom_getenv(part_name);
 
-			if (sscanf(env, "%x:%x:%n", &offset, &size, &coff) < 2)
-				return -ENXIO;
+			if (sscanf(env, "%x:%x:%n", &offset, &size,
+						&coff) < 2) {
+				ret = -ENXIO;
+				kfree(msp_maps[i].name);
+				iounmap(msp_maps[i].virt);
+				kfree(msp_parts[i]);
+				goto cleanup_loop;
+			}
 
 			msp_parts[i][j].size = size;
 			msp_parts[i][j].offset = offset;
@@ -152,18 +175,37 @@ static int __init init_msp_flash(void)
 			add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt);
 		} else {
 			printk(KERN_ERR "map probe failed for flash\n");
-			return -ENXIO;
+			ret = -ENXIO;
+			kfree(msp_maps[i].name);
+			iounmap(msp_maps[i].virt);
+			kfree(msp_parts[i]);
+			goto cleanup_loop;
 		}
 	}
 
 	return 0;
+
+cleanup_loop:
+	while (i--) {
+		del_mtd_partitions(msp_flash[i]);
+		map_destroy(msp_flash[i]);
+		kfree(msp_maps[i].name);
+		iounmap(msp_maps[i].virt);
+		kfree(msp_parts[i]);
+	}
+	kfree(msp_maps);
+free_msp_parts:
+	kfree(msp_parts);
+free_msp_flash:
+	kfree(msp_flash);
+	return ret;
 }
 
 static void __exit cleanup_msp_flash(void)
 {
 	int i;
 
-	for (i = 0; i < sizeof(msp_flash) / sizeof(struct mtd_info **); i++) {
+	for (i = 0; i < fcnt; i++) {
 		del_mtd_partitions(msp_flash[i]);
 		map_destroy(msp_flash[i]);
 		iounmap((void *)msp_maps[i].virt);
diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c
index d4314fb88212..35009294b435 100644
--- a/drivers/mtd/maps/uclinux.c
+++ b/drivers/mtd/maps/uclinux.c
@@ -89,7 +89,11 @@ static int __init uclinux_mtd_init(void)
 	mtd->priv = mapp;
 
 	uclinux_ram_mtdinfo = mtd;
+#ifdef CONFIG_MTD_PARTITIONS
 	add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS);
+#else
+	add_mtd_device(mtd);
+#endif
 
 	return(0);
 }
@@ -99,7 +103,11 @@ static int __init uclinux_mtd_init(void)
 static void __exit uclinux_mtd_cleanup(void)
 {
 	if (uclinux_ram_mtdinfo) {
+#ifdef CONFIG_MTD_PARTITIONS
 		del_mtd_partitions(uclinux_ram_mtdinfo);
+#else
+		del_mtd_device(uclinux_ram_mtdinfo);
+#endif
 		map_destroy(uclinux_ram_mtdinfo);
 		uclinux_ram_mtdinfo = NULL;
 	}
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 2d70295a5fa3..9f41b1a853c1 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -84,7 +84,7 @@ static int erase_write (struct mtd_info *mtd, unsigned long pos,
 	remove_wait_queue(&wait_q, &wait);
 
 	/*
-	 * Next, writhe data to flash.
+	 * Next, write the data to flash.
 	 */
 
 	ret = mtd->write(mtd, pos, len, &retlen, buf);
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 792b547786b8..db6de74082ad 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -427,7 +427,7 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		 * to-be-erased area begins. Verify that the starting
 		 * offset is aligned to this region's erase size:
 		 */
-		if (instr->addr & (erase_regions[i].erasesize - 1))
+		if (i < 0 || instr->addr & (erase_regions[i].erasesize - 1))
 			return -EINVAL;
 
 		/*
@@ -440,8 +440,8 @@ static int concat_erase(struct mtd_info *mtd, struct erase_info *instr)
 		/*
 		 * check if the ending offset is aligned to this region's erase size
 		 */
-		if ((instr->addr + instr->len) & (erase_regions[i].erasesize -
-						  1))
+		if (i < 0 || ((instr->addr + instr->len) &
+					(erase_regions[i].erasesize - 1)))
 			return -EINVAL;
 	}
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 69007a6eff50..467a4f177bfb 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -213,11 +213,11 @@ static struct attribute *mtd_attrs[] = {
 	NULL,
 };
 
-struct attribute_group mtd_group = {
+static struct attribute_group mtd_group = {
 	.attrs		= mtd_attrs,
 };
 
-const struct attribute_group *mtd_groups[] = {
+static const struct attribute_group *mtd_groups[] = {
 	&mtd_group,
 	NULL,
 };
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 742504ea96f5..b8043a9ba32d 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -453,7 +453,8 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
 		for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
 			;
 		/* The loop searched for the region _behind_ the first one */
-		i--;
+		if (i > 0)
+			i--;
 
 		/* Pick biggest erasesize */
 		for (; i < max && regions[i].offset < end; i++) {
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ce96c091f01b..2fda0b615246 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -80,6 +80,23 @@ config MTD_NAND_OMAP2
 	help
           Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
 
+config MTD_NAND_OMAP_PREFETCH
+	bool "GPMC prefetch support for NAND Flash device"
+	depends on MTD_NAND && MTD_NAND_OMAP2
+	default y
+	help
+	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
+	 to improve the performance.
+
+config MTD_NAND_OMAP_PREFETCH_DMA
+	depends on MTD_NAND_OMAP_PREFETCH
+	bool "DMA mode"
+	default n
+	help
+	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+	 or in DMA interrupt mode.
+	 Say y for DMA mode or MPU mode will be used
+
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX
@@ -426,6 +443,12 @@ config MTD_NAND_MXC
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
 
+config MTD_NAND_NOMADIK
+	tristate "ST Nomadik 8815 NAND support"
+	depends on ARCH_NOMADIK
+	help
+	  Driver for the NAND flash controller on the Nomadik, with ECC.
+
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
 	depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
@@ -452,4 +475,11 @@ config MTD_NAND_SOCRATES
 	help
 	  Enables support for NAND Flash chips wired onto Socrates board.
 
+config MTD_NAND_W90P910
+	tristate "Support for NAND on w90p910 evaluation board."
+	depends on ARCH_W90X900 && MTD_PARTITIONS
+	help
+	  This enables the driver for the NAND Flash on evaluation board based
+	  on w90p910.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index f3a786b3cff3..6950d3dabf10 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,5 +40,7 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
 obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
 obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_W90P910)		+= w90p910_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 20c828ba9405..f8e9975c86e5 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -218,7 +218,7 @@ static int atmel_nand_calculate(struct mtd_info *mtd,
  * buf:        buffer to store read data
  */
 static int atmel_nand_read_page(struct mtd_info *mtd,
-		struct nand_chip *chip, uint8_t *buf)
+		struct nand_chip *chip, uint8_t *buf, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 1b4690bdfdb3..c828d9ac7bd7 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -381,7 +381,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
  * we need a special oob layout and handling.
  */
 static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-			       uint8_t *buf)
+			       uint8_t *buf, int page)
 {
 	struct cafe_priv *cafe = mtd->priv;
 
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 0fad6487e6f4..f13f5b9afaf7 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -348,6 +348,12 @@ compare:
 	if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
 		return 0;
 
+	/*
+	 * Clear any previous address calculation by doing a dummy read of an
+	 * error address register.
+	 */
+	davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
+
 	/* Start address calculation, and wait for it to complete.
 	 * We _could_ start reading more data while this is working,
 	 * to speed up the overall page read.
@@ -359,8 +365,10 @@ compare:
 
 		switch ((fsr >> 8) & 0x0f) {
 		case 0:		/* no error, should not happen */
+			davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
 			return 0;
 		case 1:		/* five or more errors detected */
+			davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
 			return -EIO;
 		case 2:		/* error addresses computed */
 		case 3:
@@ -500,6 +508,26 @@ static struct nand_ecclayout hwecc4_small __initconst = {
 	},
 };
 
+/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_2048 __initconst = {
+	.eccbytes = 40,
+	.eccpos = {
+		/* at the end of spare sector */
+		24, 25, 26, 27, 28, 29,	30, 31, 32, 33,
+		34, 35, 36, 37, 38, 39,	40, 41, 42, 43,
+		44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+		54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+		},
+	.oobfree = {
+		/* 2 bytes at offset 0 hold manufacturer badblock markers */
+		{.offset = 2, .length = 22, },
+		/* 5 bytes at offset 8 hold BBT markers */
+		/* 8 bytes at offset 16 hold JFFS2 clean markers */
+	},
+};
 
 static int __init nand_davinci_probe(struct platform_device *pdev)
 {
@@ -690,15 +718,20 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 				info->mtd.oobsize - 16;
 			goto syndrome_done;
 		}
+		if (chunks == 4) {
+			info->ecclayout = hwecc4_2048;
+			info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+			goto syndrome_done;
+		}
 
-		/* For large page chips we'll be wanting to use a
-		 * not-yet-implemented mode that reads OOB data
-		 * before reading the body of the page, to avoid
-		 * the "infix OOB" model of NAND_ECC_HW_SYNDROME
-		 * (and preserve manufacturer badblock markings).
+		/* 4KiB page chips are not yet supported. The eccpos from
+		 * nand_ecclayout cannot hold 80 bytes and change to eccpos[]
+		 * breaks userspace ioctl interface with mtd-utils. Once we
+		 * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used
+		 * for the 4KiB page chips.
 		 */
 		dev_warn(&pdev->dev, "no 4-bit ECC support yet "
-				"for large page NAND\n");
+				"for 4KiB-page NAND\n");
 		ret = -EIO;
 		goto err_scan;
 
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 1f6eb2578717..ddd37d2554ed 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -739,7 +739,8 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
 
 static int fsl_elbc_read_page(struct mtd_info *mtd,
                               struct nand_chip *chip,
-                              uint8_t *buf)
+			      uint8_t *buf,
+			      int page)
 {
 	fsl_elbc_read_buf(mtd, buf, mtd->writesize);
 	fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 76beea40d2cf..65b26d5a5c0d 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -857,6 +857,17 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	}
 }
 
+/* Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks. */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr smallpage_memorybased = {
+	.options = NAND_BBT_SCAN2NDPAGE,
+	.offs = 5,
+	.len = 1,
+	.pattern = scan_ff_pattern
+};
+
 static int __init mxcnd_probe(struct platform_device *pdev)
 {
 	struct nand_chip *this;
@@ -973,7 +984,10 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 		goto escan;
 	}
 
-	host->pagesize_2k = (mtd->writesize == 2048) ? 1 : 0;
+	if (mtd->writesize == 2048) {
+		host->pagesize_2k = 1;
+		this->badblock_pattern = &smallpage_memorybased;
+	}
 
 	if (this->ecc.mode == NAND_ECC_HW) {
 		switch (mtd->oobsize) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8c21b89d2d0c..22113865438b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -688,8 +688,7 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
  retry:
 	spin_lock(lock);
 
-	/* Hardware controller shared among independend devices */
-	/* Hardware controller shared among independend devices */
+	/* Hardware controller shared among independent devices */
 	if (!chip->controller->active)
 		chip->controller->active = chip;
 
@@ -766,7 +765,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
  * Not for syndrome calculating ecc controllers, which use a special oob layout
  */
 static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf)
+			      uint8_t *buf, int page)
 {
 	chip->read_buf(mtd, buf, mtd->writesize);
 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -782,7 +781,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
  * We need a special oob layout and handling even when OOB isn't used.
  */
 static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-			      uint8_t *buf)
+			      uint8_t *buf, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -821,7 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c
  * @buf:	buffer to store read data
  */
 static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf)
+				uint8_t *buf, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -831,7 +830,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
 	uint8_t *ecc_code = chip->buffers->ecccode;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 
-	chip->ecc.read_page_raw(mtd, chip, buf);
+	chip->ecc.read_page_raw(mtd, chip, buf, page);
 
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -944,7 +943,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
  * Not for syndrome calculating ecc controllers which need a special oob layout
  */
 static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf)
+				uint8_t *buf, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -980,6 +979,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /**
+ * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @buf:	buffer to store read data
+ *
+ * Hardware ECC for large page chips, require OOB to be read first.
+ * For this ECC mode, the write_page method is re-used from ECC_HW.
+ * These methods read/write ECC from the OOB area, unlike the
+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
+ * "infix ECC" scheme and reads/writes ECC from the data area, by
+ * overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *ecc_code = chip->buffers->ecccode;
+	uint32_t *eccpos = chip->ecc.layout->eccpos;
+	uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+	/* Read the OOB area first */
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	for (i = 0; i < chip->ecc.total; i++)
+		ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/**
  * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
  * @mtd:	mtd info structure
  * @chip:	nand chip info structure
@@ -989,7 +1036,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
  * we need a special oob layout and handling.
  */
 static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				   uint8_t *buf)
+				   uint8_t *buf, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -1131,11 +1178,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 
 			/* Now read the page into the buffer */
 			if (unlikely(ops->mode == MTD_OOB_RAW))
-				ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+				ret = chip->ecc.read_page_raw(mtd, chip,
+							      bufpoi, page);
 			else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
 				ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
 			else
-				ret = chip->ecc.read_page(mtd, chip, bufpoi);
+				ret = chip->ecc.read_page(mtd, chip, bufpoi,
+							  page);
 			if (ret < 0)
 				break;
 
@@ -1413,8 +1462,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	int len;
 	uint8_t *buf = ops->oobbuf;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08Lx, len = %i\n",
-	      (unsigned long long)from, readlen);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08Lx, len = %i\n",
+			__func__, (unsigned long long)from, readlen);
 
 	if (ops->mode == MTD_OOB_AUTO)
 		len = chip->ecc.layout->oobavail;
@@ -1422,8 +1471,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 		len = mtd->oobsize;
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-			"Attempt to start read outside oob\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start read "
+					"outside oob\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1431,8 +1480,8 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 	if (unlikely(from >= mtd->size ||
 		     ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
 					(from >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-			"Attempt read beyond end of device\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read beyond end "
+					"of device\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1506,8 +1555,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 
 	/* Do not allow reads past end of device */
 	if (ops->datbuf && (from + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_read_oob: "
-		      "Attempt read beyond end of device\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt read "
+				"beyond end of device\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1816,8 +1865,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 
 	/* reject writes, which are not page aligned */
 	if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
-		printk(KERN_NOTICE "nand_write: "
-		       "Attempt to write not page aligned data\n");
+		printk(KERN_NOTICE "%s: Attempt to write not "
+				"page aligned data\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1944,8 +1993,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 	int chipnr, page, status, len;
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n",
-	      (unsigned int)to, (int)ops->ooblen);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
+			 __func__, (unsigned int)to, (int)ops->ooblen);
 
 	if (ops->mode == MTD_OOB_AUTO)
 		len = chip->ecc.layout->oobavail;
@@ -1954,14 +2003,14 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 
 	/* Do not allow write past end of page */
 	if ((ops->ooboffs + ops->ooblen) > len) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
-		      "Attempt to write past end of page\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to write "
+				"past end of page\n", __func__);
 		return -EINVAL;
 	}
 
 	if (unlikely(ops->ooboffs >= len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
-			"Attempt to start write outside oob\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt to start "
+				"write outside oob\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1970,8 +2019,8 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
 		     ops->ooboffs + ops->ooblen >
 			((mtd->size >> chip->page_shift) -
 			 (to >> chip->page_shift)) * len)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_do_write_oob: "
-			"Attempt write beyond end of device\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+				"end of device\n", __func__);
 		return -EINVAL;
 	}
 
@@ -2026,8 +2075,8 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 
 	/* Do not allow writes past end of device */
 	if (ops->datbuf && (to + ops->len) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_write_oob: "
-		      "Attempt write beyond end of device\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Attempt write beyond "
+				"end of device\n", __func__);
 		return -EINVAL;
 	}
 
@@ -2117,26 +2166,27 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 	unsigned int bbt_masked_page = 0xffffffff;
 	loff_t len;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, len = %llu\n",
-	      (unsigned long long)instr->addr, (unsigned long long)instr->len);
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+				__func__, (unsigned long long)instr->addr,
+				(unsigned long long)instr->len);
 
 	/* Start address must align on block boundary */
 	if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
 		return -EINVAL;
 	}
 
 	/* Length must align on block boundary */
 	if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-		      "Length not block aligned\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+					__func__);
 		return -EINVAL;
 	}
 
 	/* Do not allow erase past end of device */
 	if ((instr->len + instr->addr) > mtd->size) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-		      "Erase past end of device\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n",
+					__func__);
 		return -EINVAL;
 	}
 
@@ -2157,8 +2207,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd)) {
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-		      "Device is write protected!!!\n");
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+					__func__);
 		instr->state = MTD_ERASE_FAILED;
 		goto erase_exit;
 	}
@@ -2183,8 +2233,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		 */
 		if (nand_block_checkbad(mtd, ((loff_t) page) <<
 					chip->page_shift, 0, allowbbt)) {
-			printk(KERN_WARNING "nand_erase: attempt to erase a "
-			       "bad block at page 0x%08x\n", page);
+			printk(KERN_WARNING "%s: attempt to erase a bad block "
+					"at page 0x%08x\n", __func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			goto erase_exit;
 		}
@@ -2211,8 +2261,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 
 		/* See if block erase succeeded */
 		if (status & NAND_STATUS_FAIL) {
-			DEBUG(MTD_DEBUG_LEVEL0, "nand_erase: "
-			      "Failed erase, page 0x%08x\n", page);
+			DEBUG(MTD_DEBUG_LEVEL0, "%s: Failed erase, "
+					"page 0x%08x\n", __func__, page);
 			instr->state = MTD_ERASE_FAILED;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
@@ -2272,9 +2322,9 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		if (!rewrite_bbt[chipnr])
 			continue;
 		/* update the BBT for chip */
-		DEBUG(MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt "
-		      "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr],
-		      chip->bbt_td->pages[chipnr]);
+		DEBUG(MTD_DEBUG_LEVEL0, "%s: nand_update_bbt "
+			"(%d:0x%0llx 0x%0x)\n", __func__, chipnr,
+			rewrite_bbt[chipnr], chip->bbt_td->pages[chipnr]);
 		nand_update_bbt(mtd, rewrite_bbt[chipnr]);
 	}
 
@@ -2292,7 +2342,7 @@ static void nand_sync(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd->priv;
 
-	DEBUG(MTD_DEBUG_LEVEL3, "nand_sync: called\n");
+	DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
 	nand_get_device(chip, mtd, FL_SYNCING);
@@ -2356,8 +2406,8 @@ static void nand_resume(struct mtd_info *mtd)
 	if (chip->state == FL_PM_SUSPENDED)
 		nand_release_device(mtd);
 	else
-		printk(KERN_ERR "nand_resume() called for a chip which is not "
-		       "in suspended state\n");
+		printk(KERN_ERR "%s called for a chip which is not "
+		       "in suspended state\n", __func__);
 }
 
 /*
@@ -2671,6 +2721,17 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 */
 
 	switch (chip->ecc.mode) {
+	case NAND_ECC_HW_OOB_FIRST:
+		/* Similar to NAND_ECC_HW, but a separate read_page handle */
+		if (!chip->ecc.calculate || !chip->ecc.correct ||
+		     !chip->ecc.hwctl) {
+			printk(KERN_WARNING "No ECC functions supplied; "
+			       "Hardware ECC not possible\n");
+			BUG();
+		}
+		if (!chip->ecc.read_page)
+			chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
 	case NAND_ECC_HW:
 		/* Use standard hwecc read page function ? */
 		if (!chip->ecc.read_page)
@@ -2693,7 +2754,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 		     chip->ecc.read_page == nand_read_page_hwecc ||
 		     !chip->ecc.write_page ||
 		     chip->ecc.write_page == nand_write_page_hwecc)) {
-			printk(KERN_WARNING "No ECC functions supplied, "
+			printk(KERN_WARNING "No ECC functions supplied; "
 			       "Hardware ECC not possible\n");
 			BUG();
 		}
@@ -2728,7 +2789,8 @@ int nand_scan_tail(struct mtd_info *mtd)
 		chip->ecc.write_page_raw = nand_write_page_raw;
 		chip->ecc.read_oob = nand_read_oob_std;
 		chip->ecc.write_oob = nand_write_oob_std;
-		chip->ecc.size = 256;
+		if (!chip->ecc.size)
+			chip->ecc.size = 256;
 		chip->ecc.bytes = 3;
 		break;
 
@@ -2858,7 +2920,8 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
 
 	/* Many callers got this wrong, so check for it for a while... */
 	if (!mtd->owner && caller_is_module()) {
-		printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+		printk(KERN_CRIT "%s called with NULL mtd->owner!\n",
+				__func__);
 		BUG();
 	}
 
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index c0cb87d6d16e..db7ae9d6a296 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -417,22 +417,22 @@ int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
 EXPORT_SYMBOL(nand_calculate_ecc);
 
 /**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd:	MTD block structure
+ * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
  * @buf:	raw data read from the chip
  * @read_ecc:	ECC from the chip
  * @calc_ecc:	the ECC calculated from raw data
+ * @eccsize:	data bytes per ecc step (256 or 512)
  *
- * Detect and correct a 1 bit error for 256/512 byte block
+ * Detect and correct a 1 bit error for eccsize byte block
  */
-int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
-		      unsigned char *read_ecc, unsigned char *calc_ecc)
+int __nand_correct_data(unsigned char *buf,
+			unsigned char *read_ecc, unsigned char *calc_ecc,
+			unsigned int eccsize)
 {
 	unsigned char b0, b1, b2, bit_addr;
 	unsigned int byte_addr;
 	/* 256 or 512 bytes/ecc  */
-	const uint32_t eccsize_mult =
-			(((struct nand_chip *)mtd->priv)->ecc.size) >> 8;
+	const uint32_t eccsize_mult = eccsize >> 8;
 
 	/*
 	 * b0 to b2 indicate which bit is faulty (if any)
@@ -495,6 +495,23 @@ int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
 	printk(KERN_ERR "uncorrectable error : ");
 	return -1;
 }
+EXPORT_SYMBOL(__nand_correct_data);
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:	MTD block structure
+ * @buf:	raw data read from the chip
+ * @read_ecc:	ECC from the chip
+ * @calc_ecc:	the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		      unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+	return __nand_correct_data(buf, read_ecc, calc_ecc,
+				   ((struct nand_chip *)mtd->priv)->ecc.size);
+}
 EXPORT_SYMBOL(nand_correct_data);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 89bf85af642c..40b5658bdbe6 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -102,8 +102,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd,
 	wmb();
 	ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
 	/* The NDFC uses Smart Media (SMC) bytes order */
-	ecc_code[0] = p[2];
-	ecc_code[1] = p[1];
+	ecc_code[0] = p[1];
+	ecc_code[1] = p[2];
 	ecc_code[2] = p[3];
 
 	return 0;
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
new file mode 100644
index 000000000000..7c302d55910e
--- /dev/null
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -0,0 +1,250 @@
+/*
+ *  drivers/mtd/nand/nomadik_nand.c
+ *
+ *  Overview:
+ *  	Driver for on-board NAND flash on Nomadik Platforms
+ *
+ * Copyright © 2007 STMicroelectronics Pvt. Ltd.
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * Copyright © 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+#include <mtd/mtd-abi.h>
+
+struct nomadik_nand_host {
+	struct mtd_info		mtd;
+	struct nand_chip	nand;
+	void __iomem *data_va;
+	void __iomem *cmd_va;
+	void __iomem *addr_va;
+	struct nand_bbt_descr *bbt_desc;
+};
+
+static struct nand_ecclayout nomadik_ecc_layout = {
+	.eccbytes = 3 * 4,
+	.eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
+		0x02, 0x03, 0x04,
+		0x12, 0x13, 0x14,
+		0x22, 0x23, 0x24,
+		0x32, 0x33, 0x34},
+	/* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
+	.oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
+};
+
+static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
+{
+	/* No need to enable hw ecc, it's on by default */
+}
+
+static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *nand = mtd->priv;
+	struct nomadik_nand_host *host = nand->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, host->cmd_va);
+	else
+		writeb(cmd, host->addr_va);
+}
+
+static int nomadik_nand_probe(struct platform_device *pdev)
+{
+	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+	struct nomadik_nand_host *host;
+	struct mtd_info *mtd;
+	struct nand_chip *nand;
+	struct resource *res;
+	int ret = 0;
+
+	/* Allocate memory for the device structure (and zero it) */
+	host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
+	if (!host) {
+		dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Call the client's init function, if any */
+	if (pdata->init)
+		ret = pdata->init();
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Init function failed\n");
+		goto err;
+	}
+
+	/* ioremap three regions */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+	if (!res) {
+		ret = -EIO;
+		goto err_unmap;
+	}
+	host->addr_va = ioremap(res->start, res->end - res->start + 1);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+	if (!res) {
+		ret = -EIO;
+		goto err_unmap;
+	}
+	host->data_va = ioremap(res->start, res->end - res->start + 1);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+	if (!res) {
+		ret = -EIO;
+		goto err_unmap;
+	}
+	host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+
+	if (!host->addr_va || !host->data_va || !host->cmd_va) {
+		ret = -ENOMEM;
+		goto err_unmap;
+	}
+
+	/* Link all private pointers */
+	mtd = &host->mtd;
+	nand = &host->nand;
+	mtd->priv = nand;
+	nand->priv = host;
+
+	host->mtd.owner = THIS_MODULE;
+	nand->IO_ADDR_R = host->data_va;
+	nand->IO_ADDR_W = host->data_va;
+	nand->cmd_ctrl = nomadik_cmd_ctrl;
+
+	/*
+	 * This stanza declares ECC_HW but uses soft routines. It's because
+	 * HW claims to make the calculation but not the correction. However,
+	 * I haven't managed to get the desired data out of it until now.
+	 */
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->ecc.layout = &nomadik_ecc_layout;
+	nand->ecc.hwctl = nomadik_ecc_control;
+	nand->ecc.size = 512;
+	nand->ecc.bytes = 3;
+
+	nand->options = pdata->options;
+
+	/*
+	 * Scan to find existance of the device
+	 */
+	if (nand_scan(&host->mtd, 1)) {
+		ret = -ENXIO;
+		goto err_unmap;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
+#else
+	pr_info("Registering %s as whole device\n", mtd->name);
+	add_mtd_device(mtd);
+#endif
+
+	platform_set_drvdata(pdev, host);
+	return 0;
+
+ err_unmap:
+	if (host->cmd_va)
+		iounmap(host->cmd_va);
+	if (host->data_va)
+		iounmap(host->data_va);
+	if (host->addr_va)
+		iounmap(host->addr_va);
+ err:
+	kfree(host);
+	return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int nomadik_nand_remove(struct platform_device *pdev)
+{
+	struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+
+	if (pdata->exit)
+		pdata->exit();
+
+	if (host) {
+		iounmap(host->cmd_va);
+		iounmap(host->data_va);
+		iounmap(host->addr_va);
+		kfree(host);
+	}
+	return 0;
+}
+
+static int nomadik_nand_suspend(struct device *dev)
+{
+	struct nomadik_nand_host *host = dev_get_drvdata(dev);
+	int ret = 0;
+	if (host)
+		ret = host->mtd.suspend(&host->mtd);
+	return ret;
+}
+
+static int nomadik_nand_resume(struct device *dev)
+{
+	struct nomadik_nand_host *host = dev_get_drvdata(dev);
+	if (host)
+		host->mtd.resume(&host->mtd);
+	return 0;
+}
+
+static struct dev_pm_ops nomadik_nand_pm_ops = {
+	.suspend = nomadik_nand_suspend,
+	.resume = nomadik_nand_resume,
+};
+
+static struct platform_driver nomadik_nand_driver = {
+	.probe = nomadik_nand_probe,
+	.remove = nomadik_nand_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "nomadik_nand",
+		.pm = &nomadik_nand_pm_ops,
+	},
+};
+
+static int __init nand_nomadik_init(void)
+{
+	pr_info("Nomadik NAND driver\n");
+	return platform_driver_register(&nomadik_nand_driver);
+}
+
+static void __exit nand_nomadik_exit(void)
+{
+	platform_driver_unregister(&nomadik_nand_driver);
+}
+
+module_init(nand_nomadik_init);
+module_exit(nand_nomadik_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
+MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ebd07e95b814..090ab87086b5 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -18,8 +18,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
-
+#include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 
@@ -112,6 +111,27 @@
 static const char *part_probes[] = { "cmdlinepart", NULL };
 #endif
 
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
+static int use_prefetch = 1;
+
+/* "modprobe ... use_prefetch=0" etc */
+module_param(use_prefetch, bool, 0);
+MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+static int use_dma = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+#else
+const int use_dma;
+#endif
+#else
+const int use_prefetch;
+const int use_dma;
+#endif
+
 struct omap_nand_info {
 	struct nand_hw_control		controller;
 	struct omap_nand_platform_data	*pdata;
@@ -124,6 +144,9 @@ struct omap_nand_info {
 	unsigned long			phys_base;
 	void __iomem			*gpmc_cs_baseaddr;
 	void __iomem			*gpmc_baseaddr;
+	void __iomem			*nand_pref_fifo_add;
+	struct completion		comp;
+	int				dma_ch;
 };
 
 /**
@@ -189,6 +212,38 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 }
 
 /**
+ * omap_read_buf8 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct nand_chip *nand = mtd->priv;
+
+	ioread8_rep(nand->IO_ADDR_R, buf, len);
+}
+
+/**
+ * omap_write_buf8 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	u_char *p = (u_char *)buf;
+
+	while (len--) {
+		iowrite8(*p++, info->nand.IO_ADDR_W);
+		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
+						GPMC_STATUS) & GPMC_BUF_FULL));
+	}
+}
+
+/**
  * omap_read_buf16 - read data from NAND controller into buffer
  * @mtd: MTD device structure
  * @buf: buffer to store date
@@ -198,7 +253,7 @@ static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct nand_chip *nand = mtd->priv;
 
-	__raw_readsw(nand->IO_ADDR_R, buf, len / 2);
+	ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
 }
 
 /**
@@ -217,13 +272,242 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 	len >>= 1;
 
 	while (len--) {
-		writew(*p++, info->nand.IO_ADDR_W);
+		iowrite16(*p++, info->nand.IO_ADDR_W);
 
 		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
 						GPMC_STATUS) & GPMC_BUF_FULL))
 			;
 	}
 }
+
+/**
+ * omap_read_buf_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	uint32_t pfpw_status = 0, r_count = 0;
+	int ret = 0;
+	u32 *p = (u32 *)buf;
+
+	/* take care of subpage reads */
+	for (; len % 4 != 0; ) {
+		*buf++ = __raw_readb(info->nand.IO_ADDR_R);
+		len--;
+	}
+	p = (u32 *) buf;
+
+	/* configure and start prefetch transfer */
+	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	if (ret) {
+		/* PFPW engine is busy, use cpu copy method */
+		if (info->nand.options & NAND_BUSWIDTH_16)
+			omap_read_buf16(mtd, buf, len);
+		else
+			omap_read_buf8(mtd, buf, len);
+	} else {
+		do {
+			pfpw_status = gpmc_prefetch_status();
+			r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
+			ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+			p += r_count;
+			len -= r_count << 2;
+		} while (len);
+
+		/* disable and stop the PFPW engine */
+		gpmc_prefetch_reset();
+	}
+}
+
+/**
+ * omap_write_buf_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_pref(struct mtd_info *mtd,
+					const u_char *buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	uint32_t pfpw_status = 0, w_count = 0;
+	int i = 0, ret = 0;
+	u16 *p = (u16 *) buf;
+
+	/* take care of subpage writes */
+	if (len % 2 != 0) {
+		writeb(*buf, info->nand.IO_ADDR_R);
+		p = (u16 *)(buf + 1);
+		len--;
+	}
+
+	/*  configure and start prefetch transfer */
+	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	if (ret) {
+		/* PFPW engine is busy, use cpu copy method */
+		if (info->nand.options & NAND_BUSWIDTH_16)
+			omap_write_buf16(mtd, buf, len);
+		else
+			omap_write_buf8(mtd, buf, len);
+	} else {
+		pfpw_status = gpmc_prefetch_status();
+		while (pfpw_status & 0x3FFF) {
+			w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+			for (i = 0; (i < w_count) && len; i++, len -= 2)
+				iowrite16(*p++, info->nand_pref_fifo_add);
+			pfpw_status = gpmc_prefetch_status();
+		}
+
+		/* disable and stop the PFPW engine */
+		gpmc_prefetch_reset();
+	}
+}
+
+#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+/*
+ * omap_nand_dma_cb: callback on the completion of dma transfer
+ * @lch: logical channel
+ * @ch_satuts: channel status
+ * @data: pointer to completion data structure
+ */
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data)
+{
+	complete((struct completion *) data);
+}
+
+/*
+ * omap_nand_dma_transfer: configer and start dma transfer
+ * @mtd: MTD device structure
+ * @addr: virtual address in RAM of source/destination
+ * @len: number of data bytes to be transferred
+ * @is_write: flag for read/write operation
+ */
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+					unsigned int len, int is_write)
+{
+	struct omap_nand_info *info = container_of(mtd,
+					struct omap_nand_info, mtd);
+	uint32_t prefetch_status = 0;
+	enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
+							DMA_FROM_DEVICE;
+	dma_addr_t dma_addr;
+	int ret;
+
+	/* The fifo depth is 64 bytes. We have a sync at each frame and frame
+	 * length is 64 bytes.
+	 */
+	int buf_len = len >> 6;
+
+	if (addr >= high_memory) {
+		struct page *p1;
+
+		if (((size_t)addr & PAGE_MASK) !=
+			((size_t)(addr + len - 1) & PAGE_MASK))
+			goto out_copy;
+		p1 = vmalloc_to_page(addr);
+		if (!p1)
+			goto out_copy;
+		addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
+	}
+
+	dma_addr = dma_map_single(&info->pdev->dev, addr, len, dir);
+	if (dma_mapping_error(&info->pdev->dev, dma_addr)) {
+		dev_err(&info->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n", len);
+		goto out_copy;
+	}
+
+	if (is_write) {
+	    omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+						info->phys_base, 0, 0);
+	    omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+							dma_addr, 0, 0);
+	    omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+					0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+					OMAP24XX_DMA_GPMC, OMAP_DMA_DST_SYNC);
+	} else {
+	    omap_set_dma_src_params(info->dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
+						info->phys_base, 0, 0);
+	    omap_set_dma_dest_params(info->dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
+							dma_addr, 0, 0);
+	    omap_set_dma_transfer_params(info->dma_ch, OMAP_DMA_DATA_TYPE_S32,
+					0x10, buf_len, OMAP_DMA_SYNC_FRAME,
+					OMAP24XX_DMA_GPMC, OMAP_DMA_SRC_SYNC);
+	}
+	/*  configure and start prefetch transfer */
+	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
+	if (ret)
+		/* PFPW engine is busy, use cpu copy methode */
+		goto out_copy;
+
+	init_completion(&info->comp);
+
+	omap_start_dma(info->dma_ch);
+
+	/* setup and start DMA using dma_addr */
+	wait_for_completion(&info->comp);
+
+	while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
+		;
+	/* disable and stop the PFPW engine */
+	gpmc_prefetch_reset();
+
+	dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
+	return 0;
+
+out_copy:
+	if (info->nand.options & NAND_BUSWIDTH_16)
+		is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
+			: omap_write_buf16(mtd, (u_char *) addr, len);
+	else
+		is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
+			: omap_write_buf8(mtd, (u_char *) addr, len);
+	return 0;
+}
+#else
+static void omap_nand_dma_cb(int lch, u16 ch_status, void *data) {}
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+					unsigned int len, int is_write)
+{
+	return 0;
+}
+#endif
+
+/**
+ * omap_read_buf_dma_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+	if (len <= mtd->oobsize)
+		omap_read_buf_pref(mtd, buf, len);
+	else
+		/* start transfer in DMA mode */
+		omap_nand_dma_transfer(mtd, buf, len, 0x0);
+}
+
+/**
+ * omap_write_buf_dma_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_dma_pref(struct mtd_info *mtd,
+					const u_char *buf, int len)
+{
+	if (len <= mtd->oobsize)
+		omap_write_buf_pref(mtd, buf, len);
+	else
+		/* start transfer in DMA mode */
+		omap_nand_dma_transfer(mtd, buf, len, 0x1);
+}
+
 /**
  * omap_verify_buf - Verify chip data against buffer
  * @mtd: MTD device structure
@@ -658,17 +942,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 		err = -ENOMEM;
 		goto out_release_mem_region;
 	}
+
 	info->nand.controller = &info->controller;
 
 	info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
 	info->nand.cmd_ctrl  = omap_hwcontrol;
 
-	/* REVISIT:  only supports 16-bit NAND flash */
-
-	info->nand.read_buf   = omap_read_buf16;
-	info->nand.write_buf  = omap_write_buf16;
-	info->nand.verify_buf = omap_verify_buf;
-
 	/*
 	 * If RDY/BSY line is connected to OMAP then use the omap ready
 	 * funcrtion and the generic nand_wait function which reads the status
@@ -689,6 +968,40 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 								== 0x1000)
 		info->nand.options  |= NAND_BUSWIDTH_16;
 
+	if (use_prefetch) {
+		/* copy the virtual address of nand base for fifo access */
+		info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
+
+		info->nand.read_buf   = omap_read_buf_pref;
+		info->nand.write_buf  = omap_write_buf_pref;
+		if (use_dma) {
+			err = omap_request_dma(OMAP24XX_DMA_GPMC, "NAND",
+				omap_nand_dma_cb, &info->comp, &info->dma_ch);
+			if (err < 0) {
+				info->dma_ch = -1;
+				printk(KERN_WARNING "DMA request failed."
+					" Non-dma data transfer mode\n");
+			} else {
+				omap_set_dma_dest_burst_mode(info->dma_ch,
+						OMAP_DMA_DATA_BURST_16);
+				omap_set_dma_src_burst_mode(info->dma_ch,
+						OMAP_DMA_DATA_BURST_16);
+
+				info->nand.read_buf   = omap_read_buf_dma_pref;
+				info->nand.write_buf  = omap_write_buf_dma_pref;
+			}
+		}
+	} else {
+		if (info->nand.options & NAND_BUSWIDTH_16) {
+			info->nand.read_buf   = omap_read_buf16;
+			info->nand.write_buf  = omap_write_buf16;
+		} else {
+			info->nand.read_buf   = omap_read_buf8;
+			info->nand.write_buf  = omap_write_buf8;
+		}
+	}
+	info->nand.verify_buf = omap_verify_buf;
+
 #ifdef CONFIG_MTD_NAND_OMAP_HWECC
 	info->nand.ecc.bytes		= 3;
 	info->nand.ecc.size		= 512;
@@ -744,9 +1057,12 @@ static int omap_nand_remove(struct platform_device *pdev)
 	struct omap_nand_info *info = mtd->priv;
 
 	platform_set_drvdata(pdev, NULL);
+	if (use_dma)
+		omap_free_dma(info->dma_ch);
+
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
-	iounmap(info->nand.IO_ADDR_R);
+	iounmap(info->nand_pref_fifo_add);
 	kfree(&info->mtd);
 	return 0;
 }
@@ -763,6 +1079,15 @@ static struct platform_driver omap_nand_driver = {
 static int __init omap_nand_init(void)
 {
 	printk(KERN_INFO "%s driver initializing\n", DRIVER_NAME);
+
+	/* This check is required if driver is being
+	 * loaded run time as a module
+	 */
+	if ((1 == use_dma) && (0 == use_prefetch)) {
+		printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
+				"without use_prefetch'. Prefetch will not be"
+				" used in either mode (mpu or dma)\n");
+	}
 	return platform_driver_register(&omap_nand_driver);
 }
 
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 0d9d4bc9c762..f59c07427af3 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -171,7 +171,6 @@ static int __devexit orion_nand_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver orion_nand_driver = {
-	.probe		= orion_nand_probe,
 	.remove		= __devexit_p(orion_nand_remove),
 	.driver		= {
 		.name	= "orion_nand",
@@ -181,7 +180,7 @@ static struct platform_driver orion_nand_driver = {
 
 static int __init orion_nand_init(void)
 {
-	return platform_driver_register(&orion_nand_driver);
+	return platform_driver_probe(&orion_nand_driver, orion_nand_probe);
 }
 
 static void __exit orion_nand_exit(void)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 30a8ce6d3e69..6ea520ae2410 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -102,6 +102,7 @@ enum {
 	ERR_SENDCMD	= -2,
 	ERR_DBERR	= -3,
 	ERR_BBERR	= -4,
+	ERR_SBERR	= -5,
 };
 
 enum {
@@ -564,11 +565,13 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 
 	status = nand_readl(info, NDSR);
 
-	if (status & (NDSR_RDDREQ | NDSR_DBERR)) {
+	if (status & (NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR)) {
 		if (status & NDSR_DBERR)
 			info->retcode = ERR_DBERR;
+		else if (status & NDSR_SBERR)
+			info->retcode = ERR_SBERR;
 
-		disable_int(info, NDSR_RDDREQ | NDSR_DBERR);
+		disable_int(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
 		if (info->use_dma) {
 			info->state = STATE_DMA_READING;
@@ -670,7 +673,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
 			break;
 
-		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
 		/* We only are OOB, so if the data has error, does not matter */
 		if (info->retcode == ERR_DBERR)
@@ -687,7 +690,7 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
 		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
 			break;
 
-		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR);
+		pxa3xx_nand_do_cmd(info, NDSR_RDDREQ | NDSR_DBERR | NDSR_SBERR);
 
 		if (info->retcode == ERR_DBERR) {
 			/* for blank page (all 0xff), HW will calculate its ECC as
@@ -861,8 +864,12 @@ static int pxa3xx_nand_ecc_correct(struct mtd_info *mtd,
 	 * consider it as a ecc error which will tell the caller the
 	 * read fail We have distinguish all the errors, but the
 	 * nand_read_ecc only check this function return value
+	 *
+	 * Corrected (single-bit) errors must also be noted.
 	 */
-	if (info->retcode != ERR_NONE)
+	if (info->retcode == ERR_SBERR)
+		return 1;
+	else if (info->retcode != ERR_NONE)
 		return -1;
 
 	return 0;
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 2bc896623e2d..02bef21f2e4b 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -329,7 +329,7 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va
 }
 
 static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf)
+				uint8_t *buf, int page)
 {
 	int i, eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
@@ -857,7 +857,6 @@ static int __exit flctl_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver flctl_driver = {
-	.probe		= flctl_probe,
 	.remove		= flctl_remove,
 	.driver = {
 		.name	= "sh_flctl",
@@ -867,7 +866,7 @@ static struct platform_driver flctl_driver = {
 
 static int __init flctl_nand_init(void)
 {
-	return platform_driver_register(&flctl_driver);
+	return platform_driver_probe(&flctl_driver, flctl_probe);
 }
 
 static void __exit flctl_nand_cleanup(void)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index daa6a4c3b8ce..92c73344a669 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -301,6 +301,21 @@ static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	return 0;
 }
 
+static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+	int r0, r1;
+
+	/* assume ecc.size = 512 and ecc.bytes = 6 */
+	r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+	if (r0 < 0)
+		return r0;
+	r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256);
+	if (r1 < 0)
+		return r1;
+	return r0 + r1;
+}
+
 static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
 {
 	struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
@@ -424,7 +439,7 @@ static int tmio_probe(struct platform_device *dev)
 	nand_chip->ecc.bytes = 6;
 	nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
 	nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
-	nand_chip->ecc.correct = nand_correct_data;
+	nand_chip->ecc.correct = tmio_nand_correct_data;
 
 	if (data)
 		nand_chip->badblock_pattern = data->badblock_pattern;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 488088eff2ca..73af8324d0d0 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -189,18 +189,43 @@ static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
 				   uint8_t *ecc_code)
 {
 	struct platform_device *dev = mtd_to_platdev(mtd);
+	struct nand_chip *chip = mtd->priv;
+	int eccbytes;
 	u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
 
 	mcr &= ~TXX9_NDFMCR_ECC_ALL;
 	txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
 	txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR);
-	ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
-	ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
-	ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+	for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) {
+		ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+		ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+		ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+		ecc_code += 3;
+	}
 	txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
 	return 0;
 }
 
+static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf,
+		unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+	struct nand_chip *chip = mtd->priv;
+	int eccsize;
+	int corrected = 0;
+	int stat;
+
+	for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
+		stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+		if (stat < 0)
+			return stat;
+		corrected += stat;
+		buf += 256;
+		read_ecc += 3;
+		calc_ecc += 3;
+	}
+	return corrected;
+}
+
 static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct platform_device *dev = mtd_to_platdev(mtd);
@@ -244,6 +269,22 @@ static void txx9ndfmc_initialize(struct platform_device *dev)
 #define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
 	DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
 
+static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	ret = nand_scan_ident(mtd, 1);
+	if (!ret) {
+		if (mtd->writesize >= 512) {
+			chip->ecc.size = mtd->writesize;
+			chip->ecc.bytes = 3 * (mtd->writesize / 256);
+		}
+		ret = nand_scan_tail(mtd);
+	}
+	return ret;
+}
+
 static int __init txx9ndfmc_probe(struct platform_device *dev)
 {
 	struct txx9ndfmc_platform_data *plat = dev->dev.platform_data;
@@ -321,9 +362,10 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
 		chip->dev_ready = txx9ndfmc_dev_ready;
 		chip->ecc.calculate = txx9ndfmc_calculate_ecc;
-		chip->ecc.correct = nand_correct_data;
+		chip->ecc.correct = txx9ndfmc_correct_data;
 		chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
 		chip->ecc.mode = NAND_ECC_HW;
+		/* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
 		chip->ecc.size = 256;
 		chip->ecc.bytes = 3;
 		chip->chip_delay = 100;
@@ -349,7 +391,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		if (plat->wide_mask & (1 << i))
 			chip->options |= NAND_BUSWIDTH_16;
 
-		if (nand_scan(mtd, 1)) {
+		if (txx9ndfmc_nand_scan(mtd)) {
 			kfree(txx9_priv->mtdname);
 			kfree(txx9_priv);
 			continue;
diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/w90p910_nand.c
new file mode 100644
index 000000000000..7680e731348a
--- /dev/null
+++ b/drivers/mtd/nand/w90p910_nand.c
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#define REG_FMICSR   	0x00
+#define REG_SMCSR    	0xa0
+#define REG_SMISR    	0xac
+#define REG_SMCMD    	0xb0
+#define REG_SMADDR   	0xb4
+#define REG_SMDATA   	0xb8
+
+#define RESET_FMI	0x01
+#define NAND_EN		0x08
+#define READYBUSY	(0x01 << 18)
+
+#define SWRST		0x01
+#define PSIZE		(0x01 << 3)
+#define DMARWEN		(0x03 << 1)
+#define BUSWID		(0x01 << 4)
+#define ECC4EN		(0x01 << 5)
+#define WP		(0x01 << 24)
+#define NANDCS		(0x01 << 25)
+#define ENDADDR		(0x01 << 31)
+
+#define read_data_reg(dev)		\
+	__raw_readl((dev)->reg + REG_SMDATA)
+
+#define write_data_reg(dev, val)	\
+	__raw_writel((val), (dev)->reg + REG_SMDATA)
+
+#define write_cmd_reg(dev, val)		\
+	__raw_writel((val), (dev)->reg + REG_SMCMD)
+
+#define write_addr_reg(dev, val)	\
+	__raw_writel((val), (dev)->reg + REG_SMADDR)
+
+struct w90p910_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	void __iomem *reg;
+	struct clk *clk;
+	spinlock_t lock;
+};
+
+static const struct mtd_partition partitions[] = {
+	{
+	 .name = "NAND FS 0",
+	 .offset = 0,
+	 .size = 8 * 1024 * 1024
+	},
+	{
+	 .name = "NAND FS 1",
+	 .offset = MTDPART_OFS_APPEND,
+	 .size = MTDPART_SIZ_FULL
+	}
+};
+
+static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd)
+{
+	unsigned char ret;
+	struct w90p910_nand *nand;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	ret = (unsigned char)read_data_reg(nand);
+
+	return ret;
+}
+
+static void w90p910_nand_read_buf(struct mtd_info *mtd,
+						unsigned char *buf, int len)
+{
+	int i;
+	struct w90p910_nand *nand;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	for (i = 0; i < len; i++)
+		buf[i] = (unsigned char)read_data_reg(nand);
+}
+
+static void w90p910_nand_write_buf(struct mtd_info *mtd,
+					const unsigned char *buf, int len)
+{
+	int i;
+	struct w90p910_nand *nand;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	for (i = 0; i < len; i++)
+		write_data_reg(nand, buf[i]);
+}
+
+static int w90p910_verify_buf(struct mtd_info *mtd,
+					const unsigned char *buf, int len)
+{
+	int i;
+	struct w90p910_nand *nand;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	for (i = 0; i < len; i++) {
+		if (buf[i] != (unsigned char)read_data_reg(nand))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int w90p910_check_rb(struct w90p910_nand *nand)
+{
+	unsigned int val;
+	spin_lock(&nand->lock);
+	val = __raw_readl(REG_SMISR);
+	val &= READYBUSY;
+	spin_unlock(&nand->lock);
+
+	return val;
+}
+
+static int w90p910_nand_devready(struct mtd_info *mtd)
+{
+	struct w90p910_nand *nand;
+	int ready;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	ready = (w90p910_check_rb(nand)) ? 1 : 0;
+	return ready;
+}
+
+static void w90p910_nand_command_lp(struct mtd_info *mtd,
+			unsigned int command, int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+	struct w90p910_nand *nand;
+
+	nand = container_of(mtd, struct w90p910_nand, mtd);
+
+	if (command == NAND_CMD_READOOB) {
+		column += mtd->writesize;
+		command = NAND_CMD_READ0;
+	}
+
+	write_cmd_reg(nand, command & 0xff);
+
+	if (column != -1 || page_addr != -1) {
+
+		if (column != -1) {
+			if (chip->options & NAND_BUSWIDTH_16)
+				column >>= 1;
+			write_addr_reg(nand, column);
+			write_addr_reg(nand, column >> 8 | ENDADDR);
+		}
+		if (page_addr != -1) {
+			write_addr_reg(nand, page_addr);
+
+			if (chip->chipsize > (128 << 20)) {
+				write_addr_reg(nand, page_addr >> 8);
+				write_addr_reg(nand, page_addr >> 16 | ENDADDR);
+			} else {
+				write_addr_reg(nand, page_addr >> 8 | ENDADDR);
+			}
+		}
+	}
+
+	switch (command) {
+	case NAND_CMD_CACHEDPROG:
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_RNDIN:
+	case NAND_CMD_STATUS:
+	case NAND_CMD_DEPLETE1:
+		return;
+
+	case NAND_CMD_STATUS_ERROR:
+	case NAND_CMD_STATUS_ERROR0:
+	case NAND_CMD_STATUS_ERROR1:
+	case NAND_CMD_STATUS_ERROR2:
+	case NAND_CMD_STATUS_ERROR3:
+		udelay(chip->chip_delay);
+		return;
+
+	case NAND_CMD_RESET:
+		if (chip->dev_ready)
+			break;
+		udelay(chip->chip_delay);
+
+		write_cmd_reg(nand, NAND_CMD_STATUS);
+		write_cmd_reg(nand, command);
+
+		while (!w90p910_check_rb(nand))
+			;
+
+		return;
+
+	case NAND_CMD_RNDOUT:
+		write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
+		return;
+
+	case NAND_CMD_READ0:
+
+		write_cmd_reg(nand, NAND_CMD_READSTART);
+	default:
+
+		if (!chip->dev_ready) {
+			udelay(chip->chip_delay);
+			return;
+		}
+	}
+
+	/* Apply this short delay always to ensure that we do wait tWB in
+	 * any case on any machine. */
+	ndelay(100);
+
+	while (!chip->dev_ready(mtd))
+		;
+}
+
+
+static void w90p910_nand_enable(struct w90p910_nand *nand)
+{
+	unsigned int val;
+	spin_lock(&nand->lock);
+	__raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
+
+	val = __raw_readl(nand->reg + REG_FMICSR);
+
+	if (!(val & NAND_EN))
+		__raw_writel(val | NAND_EN, REG_FMICSR);
+
+	val = __raw_readl(nand->reg + REG_SMCSR);
+
+	val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
+	val |= WP;
+
+	__raw_writel(val, nand->reg + REG_SMCSR);
+
+	spin_unlock(&nand->lock);
+}
+
+static int __devinit w90p910_nand_probe(struct platform_device *pdev)
+{
+	struct w90p910_nand *w90p910_nand;
+	struct nand_chip *chip;
+	int retval;
+	struct resource *res;
+
+	retval = 0;
+
+	w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL);
+	if (!w90p910_nand)
+		return -ENOMEM;
+	chip = &(w90p910_nand->chip);
+
+	w90p910_nand->mtd.priv	= chip;
+	w90p910_nand->mtd.owner	= THIS_MODULE;
+	spin_lock_init(&w90p910_nand->lock);
+
+	w90p910_nand->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(w90p910_nand->clk)) {
+		retval = -ENOENT;
+		goto fail1;
+	}
+	clk_enable(w90p910_nand->clk);
+
+	chip->cmdfunc		= w90p910_nand_command_lp;
+	chip->dev_ready		= w90p910_nand_devready;
+	chip->read_byte		= w90p910_nand_read_byte;
+	chip->write_buf		= w90p910_nand_write_buf;
+	chip->read_buf		= w90p910_nand_read_buf;
+	chip->verify_buf	= w90p910_verify_buf;
+	chip->chip_delay	= 50;
+	chip->options		= 0;
+	chip->ecc.mode		= NAND_ECC_SOFT;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENXIO;
+		goto fail1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		retval = -EBUSY;
+		goto fail1;
+	}
+
+	w90p910_nand->reg = ioremap(res->start, resource_size(res));
+	if (!w90p910_nand->reg) {
+		retval = -ENOMEM;
+		goto fail2;
+	}
+
+	w90p910_nand_enable(w90p910_nand);
+
+	if (nand_scan(&(w90p910_nand->mtd), 1)) {
+		retval = -ENXIO;
+		goto fail3;
+	}
+
+	add_mtd_partitions(&(w90p910_nand->mtd), partitions,
+						ARRAY_SIZE(partitions));
+
+	platform_set_drvdata(pdev, w90p910_nand);
+
+	return retval;
+
+fail3:	iounmap(w90p910_nand->reg);
+fail2:	release_mem_region(res->start, resource_size(res));
+fail1:	kfree(w90p910_nand);
+	return retval;
+}
+
+static int __devexit w90p910_nand_remove(struct platform_device *pdev)
+{
+	struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	iounmap(w90p910_nand->reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	clk_disable(w90p910_nand->clk);
+	clk_put(w90p910_nand->clk);
+
+	kfree(w90p910_nand);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver w90p910_nand_driver = {
+	.probe		= w90p910_nand_probe,
+	.remove		= __devexit_p(w90p910_nand_remove),
+	.driver		= {
+		.name	= "w90p910-fmi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init w90p910_nand_init(void)
+{
+	return platform_driver_register(&w90p910_nand_driver);
+}
+
+static void __exit w90p910_nand_exit(void)
+{
+	platform_driver_unregister(&w90p910_nand_driver);
+}
+
+module_init(w90p910_nand_init);
+module_exit(w90p910_nand_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 nand driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-fmi");
diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c
index 3e164f0c9295..62d6a78c4eee 100644
--- a/drivers/mtd/ofpart.c
+++ b/drivers/mtd/ofpart.c
@@ -46,21 +46,12 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
 		const u32 *reg;
 		int len;
 
-		/* check if this is a partition node */
-		partname = of_get_property(pp, "name", &len);
-		if (strcmp(partname, "partition") != 0) {
+		reg = of_get_property(pp, "reg", &len);
+		if (!reg) {
 			nr_parts--;
 			continue;
 		}
 
-		reg = of_get_property(pp, "reg", &len);
-		if (!reg || (len != 2 * sizeof(u32))) {
-			of_node_put(pp);
-			dev_err(dev, "Invalid 'reg' on %s\n", node->full_name);
-			kfree(*pparts);
-			*pparts = NULL;
-			return -EINVAL;
-		}
 		(*pparts)[i].offset = reg[0];
 		(*pparts)[i].size = reg[1];
 
@@ -75,6 +66,14 @@ int __devinit of_mtd_parse_partitions(struct device *dev,
 		i++;
 	}
 
+	if (!i) {
+		of_node_put(pp);
+		dev_err(dev, "No valid partition found on %s\n", node->full_name);
+		kfree(*pparts);
+		*pparts = NULL;
+		return -EINVAL;
+	}
+
 	return nr_parts;
 }
 EXPORT_SYMBOL(of_mtd_parse_partitions);
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index 79fa79e8f8de..a38f580c2bb3 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -5,6 +5,7 @@
 menuconfig MTD_ONENAND
 	tristate "OneNAND Device Support"
 	depends on MTD
+	select MTD_PARTITIONS
 	help
 	  This enables support for accessing all type of OneNAND flash
 	  devices. For further information see
@@ -23,7 +24,6 @@ config MTD_ONENAND_VERIFY_WRITE
 
 config MTD_ONENAND_GENERIC
 	tristate "OneNAND Flash device via platform device driver"
-	depends on ARM
 	help
 	  Support for OneNAND flash via platform device driver.
 
@@ -66,7 +66,6 @@ config MTD_ONENAND_2X_PROGRAM
 
 config MTD_ONENAND_SIM
 	tristate "OneNAND simulator support"
-	depends on MTD_PARTITIONS
 	help
 	  The simulator may simulate various OneNAND flash chips for the
 	  OneNAND MTD layer.
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3a496c33fb52..e78914938c5c 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -19,12 +19,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
-
 #include <asm/io.h>
-#include <asm/mach/flash.h>
-
-#define DRIVER_NAME	"onenand"
 
+/*
+ * Note: Driver name and platform data format have been updated!
+ *
+ * This version of the driver is named "onenand-flash" and takes struct
+ * onenand_platform_data as platform data. The old ARM-specific version
+ * with the name "onenand" used to take struct flash_platform_data.
+ */
+#define DRIVER_NAME	"onenand-flash"
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { "cmdlinepart", NULL,  };
@@ -39,16 +43,16 @@ struct onenand_info {
 static int __devinit generic_onenand_probe(struct platform_device *pdev)
 {
 	struct onenand_info *info;
-	struct flash_platform_data *pdata = pdev->dev.platform_data;
+	struct onenand_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *res = pdev->resource;
-	unsigned long size = res->end - res->start + 1;
+	unsigned long size = resource_size(res);
 	int err;
 
 	info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 
-	if (!request_mem_region(res->start, size, pdev->dev.driver->name)) {
+	if (!request_mem_region(res->start, size, dev_name(&pdev->dev))) {
 		err = -EBUSY;
 		goto out_free_info;
 	}
@@ -59,7 +63,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
 		goto out_release_mem_region;
 	}
 
-	info->onenand.mmcontrol = pdata->mmcontrol;
+	info->onenand.mmcontrol = pdata ? pdata->mmcontrol : 0;
 	info->onenand.irq = platform_get_irq(pdev, 0);
 
 	info->mtd.name = dev_name(&pdev->dev);
@@ -75,7 +79,7 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev)
 	err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)
 		add_mtd_partitions(&info->mtd, info->parts, err);
-	else if (err <= 0 && pdata->parts)
+	else if (err <= 0 && pdata && pdata->parts)
 		add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
 	else
 #endif
@@ -99,7 +103,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev)
 {
 	struct onenand_info *info = platform_get_drvdata(pdev);
 	struct resource *res = pdev->resource;
-	unsigned long size = res->end - res->start + 1;
+	unsigned long size = resource_size(res);
 
 	platform_set_drvdata(pdev, NULL);
 
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 6e829095ea9d..ff66e4330aa7 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1191,7 +1191,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
  			/*
  			 * Chip boundary handling in DDP
  			 * Now we issued chip 1 read and pointed chip 1
- 			 * bufferam so we have to point chip 0 bufferam.
+			 * bufferram so we have to point chip 0 bufferram.
  			 */
  			if (ONENAND_IS_DDP(this) &&
  			    unlikely(from == (this->chipsize >> 1))) {
@@ -1867,8 +1867,8 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			ONENAND_SET_NEXT_BUFFERRAM(this);
 
 		/*
-		 * 2 PLANE, MLC, and Flex-OneNAND doesn't support
-		 * write-while-programe feature.
+		 * 2 PLANE, MLC, and Flex-OneNAND do not support
+		 * write-while-program feature.
 		 */
 		if (!ONENAND_IS_2PLANE(this) && !first) {
 			ONENAND_SET_PREV_BUFFERRAM(this);
@@ -1879,7 +1879,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
 			if (ret) {
 				written -= prevlen;
-				printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+				printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
 				break;
 			}
 
@@ -1905,7 +1905,7 @@ static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
 			/* In partial page write we don't update bufferram */
 			onenand_update_bufferram(mtd, to, !ret && !subpage);
 			if (ret) {
-				printk(KERN_ERR "onenand_write_ops_nolock: write filaed %d\n", ret);
+				printk(KERN_ERR "onenand_write_ops_nolock: write failed %d\n", ret);
 				break;
 			}
 
@@ -2201,7 +2201,7 @@ static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
 	/* Grab the lock and see if the device is available */
 	onenand_get_device(mtd, FL_ERASING);
 
-	/* Loop throught the pages */
+	/* Loop through the blocks */
 	instr->state = MTD_ERASING;
 
 	while (len) {
@@ -2328,7 +2328,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
         if (bbm->bbt)
                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
 
-        /* We write two bytes, so we dont have to mess with 16 bit access */
+        /* We write two bytes, so we don't have to mess with 16-bit access */
         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
 	/* FIXME : What to do when marking SLC block in partition
 	 * 	   with MLC erasesize? For now, it is not advisable to
@@ -2557,7 +2557,7 @@ static void onenand_unlock_all(struct mtd_info *mtd)
 
 #ifdef CONFIG_MTD_ONENAND_OTP
 
-/* Interal OTP operation */
+/* Internal OTP operation */
 typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
 		size_t *retlen, u_char *buf);
 
@@ -2921,7 +2921,7 @@ static void onenand_check_features(struct mtd_info *mtd)
 		this->options |= ONENAND_HAS_2PLANE;
 
 	case ONENAND_DEVICE_DENSITY_2Gb:
-		/* 2Gb DDP don't have 2 plane */
+		/* 2Gb DDP does not have 2 plane */
 		if (!ONENAND_IS_DDP(this))
 			this->options |= ONENAND_HAS_2PLANE;
 		this->options |= ONENAND_HAS_UNLOCK_ALL;
@@ -3364,7 +3364,7 @@ static int onenand_probe(struct mtd_info *mtd)
 	/* It's real page size */
 	this->writesize = mtd->writesize;
 
-	/* REVIST: Multichip handling */
+	/* REVISIT: Multichip handling */
 
 	if (FLEXONENAND(this))
 		flexonenand_get_size(mtd);
diff --git a/drivers/mtd/tests/mtd_oobtest.c b/drivers/mtd/tests/mtd_oobtest.c
index a18e8d2f2557..5553cd4eab20 100644
--- a/drivers/mtd/tests/mtd_oobtest.c
+++ b/drivers/mtd/tests/mtd_oobtest.c
@@ -512,7 +512,7 @@ static int __init mtd_oobtest_init(void)
 		goto out;
 
 	addr0 = 0;
-	for (i = 0; bbt[i] && i < ebcnt; ++i)
+	for (i = 0; i < ebcnt && bbt[i]; ++i)
 		addr0 += mtd->erasesize;
 
 	/* Attempt to write off end of OOB */
diff --git a/drivers/mtd/tests/mtd_pagetest.c b/drivers/mtd/tests/mtd_pagetest.c
index 9648818b9e2c..103cac480fee 100644
--- a/drivers/mtd/tests/mtd_pagetest.c
+++ b/drivers/mtd/tests/mtd_pagetest.c
@@ -116,11 +116,11 @@ static int verify_eraseblock(int ebnum)
 	loff_t addr = ebnum * mtd->erasesize;
 
 	addr0 = 0;
-	for (i = 0; bbt[i] && i < ebcnt; ++i)
+	for (i = 0; i < ebcnt && bbt[i]; ++i)
 		addr0 += mtd->erasesize;
 
 	addrn = mtd->size;
-	for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
 		addrn -= mtd->erasesize;
 
 	set_random_data(writebuf, mtd->erasesize);
@@ -219,11 +219,11 @@ static int crosstest(void)
 	memset(pp1, 0, pgsize * 4);
 
 	addr0 = 0;
-	for (i = 0; bbt[i] && i < ebcnt; ++i)
+	for (i = 0; i < ebcnt && bbt[i]; ++i)
 		addr0 += mtd->erasesize;
 
 	addrn = mtd->size;
-	for (i = 0; bbt[ebcnt - i - 1] && i < ebcnt; ++i)
+	for (i = 0; i < ebcnt && bbt[ebcnt - i - 1]; ++i)
 		addrn -= mtd->erasesize;
 
 	/* Read 2nd-to-last page to pp1 */
@@ -317,7 +317,7 @@ static int erasecrosstest(void)
 
 	ebnum = 0;
 	addr0 = 0;
-	for (i = 0; bbt[i] && i < ebcnt; ++i) {
+	for (i = 0; i < ebcnt && bbt[i]; ++i) {
 		addr0 += mtd->erasesize;
 		ebnum += 1;
 	}
@@ -413,7 +413,7 @@ static int erasetest(void)
 
 	ebnum = 0;
 	addr0 = 0;
-	for (i = 0; bbt[i] && i < ebcnt; ++i) {
+	for (i = 0; i < ebcnt && bbt[i]; ++i) {
 		addr0 += mtd->erasesize;
 		ebnum += 1;
 	}
diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c
index e9580104b6ba..3ff50da94789 100644
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
@@ -15,6 +15,7 @@
 #include <linux/completion.h>
 #include <linux/sched.h>
 #include <linux/freezer.h>
+#include <linux/kthread.h>
 #include "nodelist.h"
 
 
@@ -31,7 +32,7 @@ void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c)
 /* This must only ever be called when no GC thread is currently running */
 int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
 {
-	pid_t pid;
+	struct task_struct *tsk;
 	int ret = 0;
 
 	BUG_ON(c->gc_task);
@@ -39,15 +40,16 @@ int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c)
 	init_completion(&c->gc_thread_start);
 	init_completion(&c->gc_thread_exit);
 
-	pid = kernel_thread(jffs2_garbage_collect_thread, c, CLONE_FS|CLONE_FILES);
-	if (pid < 0) {
-		printk(KERN_WARNING "fork failed for JFFS2 garbage collect thread: %d\n", -pid);
+	tsk = kthread_run(jffs2_garbage_collect_thread, c, "jffs2_gcd_mtd%d", c->mtd->index);
+	if (IS_ERR(tsk)) {
+		printk(KERN_WARNING "fork failed for JFFS2 garbage collect thread: %ld\n", -PTR_ERR(tsk));
 		complete(&c->gc_thread_exit);
-		ret = pid;
+		ret = PTR_ERR(tsk);
 	} else {
 		/* Wait for it... */
-		D1(printk(KERN_DEBUG "JFFS2: Garbage collect thread is pid %d\n", pid));
+		D1(printk(KERN_DEBUG "JFFS2: Garbage collect thread is pid %d\n", tsk->pid));
 		wait_for_completion(&c->gc_thread_start);
+		ret = tsk->pid;
 	}
 
 	return ret;
@@ -71,7 +73,6 @@ static int jffs2_garbage_collect_thread(void *_c)
 {
 	struct jffs2_sb_info *c = _c;
 
-	daemonize("jffs2_gcd_mtd%d", c->mtd->index);
 	allow_signal(SIGKILL);
 	allow_signal(SIGSTOP);
 	allow_signal(SIGCONT);
@@ -107,6 +108,11 @@ static int jffs2_garbage_collect_thread(void *_c)
 		 * the GC thread get there first. */
 		schedule_timeout_interruptible(msecs_to_jiffies(50));
 
+		if (kthread_should_stop()) {
+			D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread():  kthread_stop() called.\n"));
+			goto die;
+		}
+
 		/* Put_super will send a SIGKILL and then wait on the sem.
 		 */
 		while (signal_pending(current) || freezing(current)) {
diff --git a/fs/jffs2/malloc.c b/fs/jffs2/malloc.c
index 9eff2bdae8a7..c082868910f2 100644
--- a/fs/jffs2/malloc.c
+++ b/fs/jffs2/malloc.c
@@ -39,13 +39,13 @@ int __init jffs2_create_slab_caches(void)
 
 	raw_dirent_slab = kmem_cache_create("jffs2_raw_dirent",
 					    sizeof(struct jffs2_raw_dirent),
-					    0, 0, NULL);
+					    0, SLAB_HWCACHE_ALIGN, NULL);
 	if (!raw_dirent_slab)
 		goto err;
 
 	raw_inode_slab = kmem_cache_create("jffs2_raw_inode",
 					   sizeof(struct jffs2_raw_inode),
-					   0, 0, NULL);
+					   0, SLAB_HWCACHE_ALIGN, NULL);
 	if (!raw_inode_slab)
 		goto err;
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4030ebada49e..7a232a9bdd62 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -121,6 +121,7 @@ typedef enum {
 	NAND_ECC_SOFT,
 	NAND_ECC_HW,
 	NAND_ECC_HW_SYNDROME,
+	NAND_ECC_HW_OOB_FIRST,
 } nand_ecc_modes_t;
 
 /*
@@ -271,13 +272,13 @@ struct nand_ecc_ctrl {
 					   uint8_t *calc_ecc);
 	int			(*read_page_raw)(struct mtd_info *mtd,
 						 struct nand_chip *chip,
-						 uint8_t *buf);
+						 uint8_t *buf, int page);
 	void			(*write_page_raw)(struct mtd_info *mtd,
 						  struct nand_chip *chip,
 						  const uint8_t *buf);
 	int			(*read_page)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
-					     uint8_t *buf);
+					     uint8_t *buf, int page);
 	int			(*read_subpage)(struct mtd_info *mtd,
 					     struct nand_chip *chip,
 					     uint32_t offs, uint32_t len,
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 090da505425d..052ea8ca2434 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -21,6 +21,12 @@ struct mtd_info;
 int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
 
 /*
+ * Detect and correct a 1 bit error for eccsize byte block
+ */
+int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
+			unsigned int eccsize);
+
+/*
  * Detect and correct a 1 bit error for 256 byte block
  */
 int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 8ed873374381..4e49f3350678 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -214,4 +214,12 @@ unsigned onenand_block(struct onenand_chip *this, loff_t addr);
 loff_t onenand_addr(struct onenand_chip *this, int block);
 int flexonenand_region(struct mtd_info *mtd, loff_t addr);
 
+struct mtd_partition;
+
+struct onenand_platform_data {
+	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
 #endif	/* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index 86a6bbef6465..acadbf53a69f 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -207,6 +207,9 @@
 #define ONENAND_ECC_2BIT		(1 << 1)
 #define ONENAND_ECC_2BIT_ALL		(0xAAAA)
 #define FLEXONENAND_UNCORRECTABLE_ERROR	(0x1010)
+#define ONENAND_ECC_3BIT		(1 << 2)
+#define ONENAND_ECC_4BIT		(1 << 3)
+#define ONENAND_ECC_4BIT_UNCORRECTABLE	(0x1010)
 
 /*
  * One-Time Programmable (OTP)