Merge tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 5.7-rc1.

  We again end up deleting more code than we added here, thanks to
  finally getting rid of the old and obsolete wireless USB stuff, and
  the exfat code (which is coming in again through the vfs tree in a
  much cleaner version).

  But some code does come back, with the octeon drivers being found to
  actually be used in the wild, so those deletions are now reverted.

  Other than those major things, just loads and loads of tiny checkpatch
  cleanups all over the place, along with new IIO drivers and fixes.

  All have been in linux-next with no reported issues"

[ Stephen Rothwell points out some reported issues due to merge conflicts ]

* tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits)
  staging: vt6656: Use DIV_ROUND_UP macro instead of specific code
  staging: remove hp100 driver
  staging: wilc1000: Use crc7 in lib/ rather than a private copy
  Staging: rtl8192u: ieee80211: Use netdev_alert().
  Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.
  Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.
  Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.
  staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
  staging: rtl8723bs: hal: Remove NULL check before kfree
  staging: rtl8723bs: hal: Correct typos in comments
  staging: rtl8723bs: os_dep: Correct typos in comments
  staging: rtl8723bs: core: Correct typos in comments
  staging: rtl8723bs: hal: Remove unnecessary cast on void pointer
  staging: rtl8188eu: cleanup long line in odm.c
  staging: rtl8723bs: hal: Compress return logic
  staging: rtl8723bs: rtw_cmd: Compress lines for immediate return
  staging: rtl8723bs: rtw_efuse: Compress lines for immediate return
  staging: wilc1000: remove label from examples in DT binding documentation
  staging: rtl8723bs: Remove blank line before '}' brace
  Staging: rtl8188eu: hal: Add space around operators
  ...

4 files changed, 534 insertions, 6 deletions

diff --git a/Documentation/ABI/testing/configfs-most b/Documentation/ABI/testing/configfs-most
new file mode 100644
index 000000000000..ed67a4d9f6d6
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-most
@@ -0,0 +1,196 @@
+What: 		/sys/kernel/config/most_<component>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description: 	Interface is used to configure and connect device channels
+		to component drivers.
+
+		Attributes are visible only when configfs is mounted. To mount
+		configfs in /sys/kernel/config directory use:
+		# mount -t configfs none /sys/kernel/config/
+
+
+What: 		/sys/kernel/config/most_cdev/<link>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description:
+		The attributes:
+
+		buffer_size	configure the buffer size for this channel
+
+		subbuffer_size	configure the sub-buffer size for this channel
+				(needed for synchronous and isochrnous data)
+
+
+		num_buffers	configure number of buffers used for this
+				channel
+
+		datatype	configure type of data that will travel over
+				this channel
+
+		direction	configure whether this link will be an input
+				or output
+
+		dbr_size	configure DBR data buffer size (this is used
+				for MediaLB communication only)
+
+		packets_per_xact
+				configure the number of packets that will be
+				collected from the network before being
+				transmitted via USB (this is used for USB
+				communication only)
+
+		device		name of the device the link is to be attached to
+
+		channel		name of the channel the link is to be attached to
+
+		comp_params	pass parameters needed by some components
+
+		create_link	write '1' to this attribute to trigger the
+				creation of the link. In case of speculative
+				configuration, the creation is post-poned until
+				a physical device is being attached to the bus.
+
+		destroy_link	write '1' to this attribute to destroy an
+				active link
+
+What: 		/sys/kernel/config/most_video/<link>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description:
+		The attributes:
+
+		buffer_size	configure the buffer size for this channel
+
+		subbuffer_size	configure the sub-buffer size for this channel
+				(needed for synchronous and isochrnous data)
+
+
+		num_buffers	configure number of buffers used for this
+				channel
+
+		datatype	configure type of data that will travel over
+				this channel
+
+		direction	configure whether this link will be an input
+				or output
+
+		dbr_size	configure DBR data buffer size (this is used
+				for MediaLB communication only)
+
+		packets_per_xact
+				configure the number of packets that will be
+				collected from the network before being
+				transmitted via USB (this is used for USB
+				communication only)
+
+		device		name of the device the link is to be attached to
+
+		channel		name of the channel the link is to be attached to
+
+		comp_params	pass parameters needed by some components
+
+		create_link	write '1' to this attribute to trigger the
+				creation of the link. In case of speculative
+				configuration, the creation is post-poned until
+				a physical device is being attached to the bus.
+
+		destroy_link	write '1' to this attribute to destroy an
+				active link
+
+What: 		/sys/kernel/config/most_net/<link>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description:
+		The attributes:
+
+		buffer_size	configure the buffer size for this channel
+
+		subbuffer_size	configure the sub-buffer size for this channel
+				(needed for synchronous and isochrnous data)
+
+
+		num_buffers	configure number of buffers used for this
+				channel
+
+		datatype	configure type of data that will travel over
+				this channel
+
+		direction	configure whether this link will be an input
+				or output
+
+		dbr_size	configure DBR data buffer size (this is used
+				for MediaLB communication only)
+
+		packets_per_xact
+				configure the number of packets that will be
+				collected from the network before being
+				transmitted via USB (this is used for USB
+				communication only)
+
+		device		name of the device the link is to be attached to
+
+		channel		name of the channel the link is to be attached to
+
+		comp_params	pass parameters needed by some components
+
+		create_link	write '1' to this attribute to trigger the
+				creation of the link. In case of speculative
+				configuration, the creation is post-poned until
+				a physical device is being attached to the bus.
+
+		destroy_link	write '1' to this attribute to destroy an
+				active link
+
+What: 		/sys/kernel/config/most_sound/<card>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description:
+		The attributes:
+
+		create_card	write '1' to this attribute to trigger the
+                                registration of the sound card with the ALSA
+				subsystem.
+
+What: 		/sys/kernel/config/most_sound/<card>/<link>
+Date: 		March 8, 2019
+KernelVersion:  5.2
+Description:
+		The attributes:
+
+		buffer_size	configure the buffer size for this channel
+
+		subbuffer_size	configure the sub-buffer size for this channel
+				(needed for synchronous and isochrnous data)
+
+
+		num_buffers	configure number of buffers used for this
+				channel
+
+		datatype	configure type of data that will travel over
+				this channel
+
+		direction	configure whether this link will be an input
+				or output
+
+		dbr_size	configure DBR data buffer size (this is used
+				for MediaLB communication only)
+
+		packets_per_xact
+				configure the number of packets that will be
+				collected from the network before being
+				transmitted via USB (this is used for USB
+				communication only)
+
+		device		name of the device the link is to be attached to
+
+		channel		name of the channel the link is to be attached to
+
+		comp_params	pass parameters needed by some components
+
+		create_link	write '1' to this attribute to trigger the
+				creation of the link. In case of speculative
+				configuration, the creation is post-poned until
+				a physical device is being attached to the bus.
+
+		destroy_link	write '1' to this attribute to destroy an
+				active link
diff --git a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
index 46b1f33b2fce..eac32180c40d 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
+++ b/Documentation/ABI/testing/sysfs-bus-counter-104-quad-8
@@ -1,3 +1,28 @@
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates whether a differential
+		encoder cable fault (not connected or loose wires) is detected
+		for the respective channel of Signal Y. Valid attribute values
+		are boolean. Detection must first be enabled via the
+		corresponding cable_fault_enable attribute.
+
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Whether detection of differential encoder cable faults for the
+		respective channel of Signal Y is enabled. Valid attribute
+		values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler
+KernelVersion:	5.7
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Filter clock factor for input Signal Y. This prescaler value
+		affects the inputs of both quadrature pair signals.
+
 What:		/sys/bus/counter/devices/counterX/signalY/index_polarity
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
index 7627d3be08f5..f8315202c8f0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
@@ -2,17 +2,22 @@ What:		/sys/bus/iio/devices/iio:deviceX/ac_excitation_en
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Reading gives the state of AC excitation.
-		Writing '1' enables AC excitation.
+		This attribute, if available, is used to enable the AC
+		excitation mode found on some converters. In ac excitation mode,
+		the polarity of the excitation voltage is reversed on
+		alternate cycles, to eliminate DC errors.
 
 What:		/sys/bus/iio/devices/iio:deviceX/bridge_switch_en
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
-		This bridge switch is used to disconnect it when there is a
-		need to minimize the system current consumption.
-		Reading gives the state of the bridge switch.
-		Writing '1' enables the bridge switch.
+		This attribute, if available, is used to close or open the
+		bridge power down switch found on some converters.
+		In bridge applications, such as strain gauges and load cells,
+		the bridge itself consumes the majority of the current in the
+		system. To minimize the current consumption of the system,
+		the bridge can be disconnected (when it is not being used
+		using the bridge_switch_en attribute.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
 KernelVersion:
@@ -21,6 +26,13 @@ Description:
 		Initiates the system calibration procedure. This is done on a
 		single channel at a time. Write '1' to start the calibration.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Measure voltage from AIN2 pin connected to AIN(+)
+		and AIN(-) shorted.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most
new file mode 100644
index 000000000000..6b1d06e3285e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-most
@@ -0,0 +1,295 @@
+What:		/sys/bus/most/devices/.../description
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Provides information about the interface type and the physical
+		location of the device. Hardware attached via USB, for instance,
+		might return <1-1.1:1.0>
+Users:
+
+What:		/sys/bus/most/devices/.../interface
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the type of peripheral interface the device uses.
+Users:
+
+What:		/sys/bus/most/devices/.../dci
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		If the network interface controller is attached via USB, a dci
+		directory is created that allows applications to read and
+		write the controller's DCI registers.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/arb_address
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to set an arbitrary DCI register address an
+		application wants to read from or write to.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/arb_value
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to read and write the DCI register whose address
+		is stored in arb_address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_eui48_hi
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MAC address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_eui48_lo
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MAC address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_eui48_mi
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MAC address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_filter
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MEP filter address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_hash0
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MEP hash table.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_hash1
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MEP hash table.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_hash2
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MEP hash table.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/mep_hash3
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to check and configure the MEP hash table.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/ni_state
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the current network interface state.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/node_address
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the current node address.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/node_position
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the current node position.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/packet_bandwidth
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the configured packet bandwidth.
+Users:
+
+What:		/sys/bus/most/devices/.../dci/sync_ep
+Date:		June 2016
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Triggers the controller's synchronization process for a certain
+		endpoint.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		For every channel of the device a directory is created, whose
+		name is dictated by the HDM. This enables an application to
+		collect information about the channel's capabilities and
+		configure it.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/available_datatypes
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the data types the current channel can transport.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/available_directions
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the directions the current channel is capable of.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/number_of_packet_buffers
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the number of packet buffers the current channel can
+		handle.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/number_of_stream_buffers
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the number of streaming buffers the current channel can
+		handle.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/size_of_packet_buffer
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the size of a packet buffer the current channel can
+		handle.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/size_of_stream_buffer
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates the size of a streaming buffer the current channel can
+		handle.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_number_of_buffers
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the number of buffers of the current channel.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_buffer_size
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the size of a buffer of the current channel.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_direction
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the direction of the current channel.
+		The following strings will be accepted:
+			'dir_tx',
+			'dir_rx'
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_datatype
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the data type of the current channel.
+		The following strings will be accepted:
+			'control',
+			'async',
+			'sync',
+			'isoc_avp'
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_subbuffer_size
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the subbuffer size of the current channel.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/set_packets_per_xact
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is to configure the number of packets per transaction of
+		the current channel. This is only needed network interface
+		controller is attached via USB.
+Users:
+
+What:		/sys/bus/most/devices/.../<channel>/channel_starving
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		Indicates whether current channel ran out of buffers.
+Users:
+
+What:		/sys/bus/most/drivers/most_core/components
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to retrieve a list of registered components.
+Users:
+
+What:		/sys/bus/most/drivers/most_core/links
+Date:		March 2017
+KernelVersion:	4.15
+Contact:	Christian Gromm <christian.gromm@microchip.com>
+Description:
+		This is used to retrieve a list of established links.
+Users: