diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/DocBook/mtdnand.tmpl | |
download | linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 linux-stable-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/DocBook/mtdnand.tmpl')
-rw-r--r-- | Documentation/DocBook/mtdnand.tmpl | 1320 |
1 files changed, 1320 insertions, 0 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl new file mode 100644 index 000000000000..6e463d0db266 --- /dev/null +++ b/Documentation/DocBook/mtdnand.tmpl @@ -0,0 +1,1320 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="MTD-NAND-Guide"> + <bookinfo> + <title>MTD NAND Driver Programming Interface</title> + + <authorgroup> + <author> + <firstname>Thomas</firstname> + <surname>Gleixner</surname> + <affiliation> + <address> + <email>tglx@linutronix.de</email> + </address> + </affiliation> + </author> + </authorgroup> + + <copyright> + <year>2004</year> + <holder>Thomas Gleixner</holder> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="intro"> + <title>Introduction</title> + <para> + The generic NAND driver supports almost all NAND and AG-AND based + chips and connects them to the Memory Technology Devices (MTD) + subsystem of the Linux Kernel. + </para> + <para> + This documentation is provided for developers who want to implement + board drivers or filesystem drivers suitable for NAND devices. + </para> + </chapter> + + <chapter id="bugs"> + <title>Known Bugs And Assumptions</title> + <para> + None. + </para> + </chapter> + + <chapter id="dochints"> + <title>Documentation hints</title> + <para> + The function and structure docs are autogenerated. Each function and + struct member has a short description which is marked with an [XXX] identifier. + The following chapters explain the meaning of those identifiers. + </para> + <sect1> + <title>Function identifiers [XXX]</title> + <para> + The functions are marked with [XXX] identifiers in the short + comment. The identifiers explain the usage and scope of the + functions. Following identifiers are used: + </para> + <itemizedlist> + <listitem><para> + [MTD Interface]</para><para> + These functions provide the interface to the MTD kernel API. + They are not replacable and provide functionality + which is complete hardware independent. + </para></listitem> + <listitem><para> + [NAND Interface]</para><para> + These functions are exported and provide the interface to the NAND kernel API. + </para></listitem> + <listitem><para> + [GENERIC]</para><para> + Generic functions are not replacable and provide functionality + which is complete hardware independent. + </para></listitem> + <listitem><para> + [DEFAULT]</para><para> + Default functions provide hardware related functionality which is suitable + for most of the implementations. These functions can be replaced by the + board driver if neccecary. Those functions are called via pointers in the + NAND chip description structure. The board driver can set the functions which + should be replaced by board dependend functions before calling nand_scan(). + If the function pointer is NULL on entry to nand_scan() then the pointer + is set to the default function which is suitable for the detected chip type. + </para></listitem> + </itemizedlist> + </sect1> + <sect1> + <title>Struct member identifiers [XXX]</title> + <para> + The struct members are marked with [XXX] identifiers in the + comment. The identifiers explain the usage and scope of the + members. Following identifiers are used: + </para> + <itemizedlist> + <listitem><para> + [INTERN]</para><para> + These members are for NAND driver internal use only and must not be + modified. Most of these values are calculated from the chip geometry + information which is evaluated during nand_scan(). + </para></listitem> + <listitem><para> + [REPLACEABLE]</para><para> + Replaceable members hold hardware related functions which can be + provided by the board driver. The board driver can set the functions which + should be replaced by board dependend functions before calling nand_scan(). + If the function pointer is NULL on entry to nand_scan() then the pointer + is set to the default function which is suitable for the detected chip type. + </para></listitem> + <listitem><para> + [BOARDSPECIFIC]</para><para> + Board specific members hold hardware related information which must + be provided by the board driver. The board driver must set the function + pointers and datafields before calling nand_scan(). + </para></listitem> + <listitem><para> + [OPTIONAL]</para><para> + Optional members can hold information relevant for the board driver. The + generic NAND driver code does not use this information. + </para></listitem> + </itemizedlist> + </sect1> + </chapter> + + <chapter id="basicboarddriver"> + <title>Basic board driver</title> + <para> + For most boards it will be sufficient to provide just the + basic functions and fill out some really board dependend + members in the nand chip description structure. + See drivers/mtd/nand/skeleton for reference. + </para> + <sect1> + <title>Basic defines</title> + <para> + At least you have to provide a mtd structure and + a storage for the ioremap'ed chip address. + You can allocate the mtd structure using kmalloc + or you can allocate it statically. + In case of static allocation you have to allocate + a nand_chip structure too. + </para> + <para> + Kmalloc based example + </para> + <programlisting> +static struct mtd_info *board_mtd; +static unsigned long baseaddr; + </programlisting> + <para> + Static example + </para> + <programlisting> +static struct mtd_info board_mtd; +static struct nand_chip board_chip; +static unsigned long baseaddr; + </programlisting> + </sect1> + <sect1> + <title>Partition defines</title> + <para> + If you want to divide your device into parititions, then + enable the configuration switch CONFIG_MTD_PARITIONS and define + a paritioning scheme suitable to your board. + </para> + <programlisting> +#define NUM_PARTITIONS 2 +static struct mtd_partition partition_info[] = { + { .name = "Flash partition 1", + .offset = 0, + .size = 8 * 1024 * 1024 }, + { .name = "Flash partition 2", + .offset = MTDPART_OFS_NEXT, + .size = MTDPART_SIZ_FULL }, +}; + </programlisting> + </sect1> + <sect1> + <title>Hardware control function</title> + <para> + The hardware control function provides access to the + control pins of the NAND chip(s). + The access can be done by GPIO pins or by address lines. + If you use address lines, make sure that the timing + requirements are met. + </para> + <para> + <emphasis>GPIO based example</emphasis> + </para> + <programlisting> +static void board_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch(cmd){ + case NAND_CTL_SETCLE: /* Set CLE pin high */ break; + case NAND_CTL_CLRCLE: /* Set CLE pin low */ break; + case NAND_CTL_SETALE: /* Set ALE pin high */ break; + case NAND_CTL_CLRALE: /* Set ALE pin low */ break; + case NAND_CTL_SETNCE: /* Set nCE pin low */ break; + case NAND_CTL_CLRNCE: /* Set nCE pin high */ break; + } +} + </programlisting> + <para> + <emphasis>Address lines based example.</emphasis> It's assumed that the + nCE pin is driven by a chip select decoder. + </para> + <programlisting> +static void board_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = (struct nand_chip *) mtd->priv; + switch(cmd){ + case NAND_CTL_SETCLE: this->IO_ADDR_W |= CLE_ADRR_BIT; break; + case NAND_CTL_CLRCLE: this->IO_ADDR_W &= ~CLE_ADRR_BIT; break; + case NAND_CTL_SETALE: this->IO_ADDR_W |= ALE_ADRR_BIT; break; + case NAND_CTL_CLRALE: this->IO_ADDR_W &= ~ALE_ADRR_BIT; break; + } +} + </programlisting> + </sect1> + <sect1> + <title>Device ready function</title> + <para> + If the hardware interface has the ready busy pin of the NAND chip connected to a + GPIO or other accesible I/O pin, this function is used to read back the state of the + pin. The function has no arguments and should return 0, if the device is busy (R/B pin + is low) and 1, if the device is ready (R/B pin is high). + If the hardware interface does not give access to the ready busy pin, then + the function must not be defined and the function pointer this->dev_ready is set to NULL. + </para> + </sect1> + <sect1> + <title>Init function</title> + <para> + The init function allocates memory and sets up all the board + specific parameters and function pointers. When everything + is set up nand_scan() is called. This function tries to + detect and identify then chip. If a chip is found all the + internal data fields are initialized accordingly. + The structure(s) have to be zeroed out first and then filled with the neccecary + information about the device. + </para> + <programlisting> +int __init board_init (void) +{ + struct nand_chip *this; + int err = 0; + + /* Allocate memory for MTD device structure and private data */ + board_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct nand_chip), GFP_KERNEL); + if (!board_mtd) { + printk ("Unable to allocate NAND MTD device structure.\n"); + err = -ENOMEM; + goto out; + } + + /* Initialize structures */ + memset ((char *) board_mtd, 0, sizeof(struct mtd_info) + sizeof(struct nand_chip)); + + /* map physical adress */ + baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024); + if(!baseaddr){ + printk("Ioremap to access NAND chip failed\n"); + err = -EIO; + goto out_mtd; + } + + /* Get pointer to private data */ + this = (struct nand_chip *) (); + /* Link the private data with the MTD structure */ + board_mtd->priv = this; + + /* Set address of NAND IO lines */ + this->IO_ADDR_R = baseaddr; + this->IO_ADDR_W = baseaddr; + /* Reference hardware control function */ + this->hwcontrol = board_hwcontrol; + /* Set command delay time, see datasheet for correct value */ + this->chip_delay = CHIP_DEPENDEND_COMMAND_DELAY; + /* Assign the device ready function, if available */ + this->dev_ready = board_dev_ready; + this->eccmode = NAND_ECC_SOFT; + + /* Scan to find existance of the device */ + if (nand_scan (board_mtd, 1)) { + err = -ENXIO; + goto out_ior; + } + + add_mtd_partitions(board_mtd, partition_info, NUM_PARTITIONS); + goto out; + +out_ior: + iounmap((void *)baseaddr); +out_mtd: + kfree (board_mtd); +out: + return err; +} +module_init(board_init); + </programlisting> + </sect1> + <sect1> + <title>Exit function</title> + <para> + The exit function is only neccecary if the driver is + compiled as a module. It releases all resources which + are held by the chip driver and unregisters the partitions + in the MTD layer. + </para> + <programlisting> +#ifdef MODULE +static void __exit board_cleanup (void) +{ + /* Release resources, unregister device */ + nand_release (board_mtd); + + /* unmap physical adress */ + iounmap((void *)baseaddr); + + /* Free the MTD device structure */ + kfree (board_mtd); +} +module_exit(board_cleanup); +#endif + </programlisting> + </sect1> + </chapter> + + <chapter id="boarddriversadvanced"> + <title>Advanced board driver functions</title> + <para> + This chapter describes the advanced functionality of the NAND + driver. For a list of functions which can be overridden by the board + driver see the documentation of the nand_chip structure. + </para> + <sect1> + <title>Multiple chip control</title> + <para> + The nand driver can control chip arrays. Therefor the + board driver must provide an own select_chip function. This + function must (de)select the requested chip. + The function pointer in the nand_chip structure must + be set before calling nand_scan(). The maxchip parameter + of nand_scan() defines the maximum number of chips to + scan for. Make sure that the select_chip function can + handle the requested number of chips. + </para> + <para> + The nand driver concatenates the chips to one virtual + chip and provides this virtual chip to the MTD layer. + </para> + <para> + <emphasis>Note: The driver can only handle linear chip arrays + of equally sized chips. There is no support for + parallel arrays which extend the buswidth.</emphasis> + </para> + <para> + <emphasis>GPIO based example</emphasis> + </para> + <programlisting> +static void board_select_chip (struct mtd_info *mtd, int chip) +{ + /* Deselect all chips, set all nCE pins high */ + GPIO(BOARD_NAND_NCE) |= 0xff; + if (chip >= 0) + GPIO(BOARD_NAND_NCE) &= ~ (1 << chip); +} + </programlisting> + <para> + <emphasis>Address lines based example.</emphasis> + Its assumed that the nCE pins are connected to an + address decoder. + </para> + <programlisting> +static void board_select_chip (struct mtd_info *mtd, int chip) +{ + struct nand_chip *this = (struct nand_chip *) mtd->priv; + + /* Deselect all chips */ + this->IO_ADDR_R &= ~BOARD_NAND_ADDR_MASK; + this->IO_ADDR_W &= ~BOARD_NAND_ADDR_MASK; + switch (chip) { + case 0: + this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIP0; + this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIP0; + break; + .... + case n: + this->IO_ADDR_R |= BOARD_NAND_ADDR_CHIPn; + this->IO_ADDR_W |= BOARD_NAND_ADDR_CHIPn; + break; + } +} + </programlisting> + </sect1> + <sect1> + <title>Hardware ECC support</title> + <sect2> + <title>Functions and constants</title> + <para> + The nand driver supports three different types of + hardware ECC. + <itemizedlist> + <listitem><para>NAND_ECC_HW3_256</para><para> + Hardware ECC generator providing 3 bytes ECC per + 256 byte. + </para> </listitem> + <listitem><para>NAND_ECC_HW3_512</para><para> + Hardware ECC generator providing 3 bytes ECC per + 512 byte. + </para> </listitem> + <listitem><para>NAND_ECC_HW6_512</para><para> + Hardware ECC generator providing 6 bytes ECC per + 512 byte. + </para> </listitem> + <listitem><para>NAND_ECC_HW8_512</para><para> + Hardware ECC generator providing 6 bytes ECC per + 512 byte. + </para> </listitem> + </itemizedlist> + If your hardware generator has a different functionality + add it at the appropriate place in nand_base.c + </para> + <para> + The board driver must provide following functions: + <itemizedlist> + <listitem><para>enable_hwecc</para><para> + This function is called before reading / writing to + the chip. Reset or initialize the hardware generator + in this function. The function is called with an + argument which let you distinguish between read + and write operations. + </para> </listitem> + <listitem><para>calculate_ecc</para><para> + This function is called after read / write from / to + the chip. Transfer the ECC from the hardware to + the buffer. If the option NAND_HWECC_SYNDROME is set + then the function is only called on write. See below. + </para> </listitem> + <listitem><para>correct_data</para><para> + In case of an ECC error this function is called for + error detection and correction. Return 1 respectively 2 + in case the error can be corrected. If the error is + not correctable return -1. If your hardware generator + matches the default algorithm of the nand_ecc software + generator then use the correction function provided + by nand_ecc instead of implementing duplicated code. + </para> </listitem> + </itemizedlist> + </para> + </sect2> + <sect2> + <title>Hardware ECC with syndrome calculation</title> + <para> + Many hardware ECC implementations provide Reed-Solomon + codes and calculate an error syndrome on read. The syndrome + must be converted to a standard Reed-Solomon syndrome + before calling the error correction code in the generic + Reed-Solomon library. + </para> + <para> + The ECC bytes must be placed immidiately after the data + bytes in order to make the syndrome generator work. This + is contrary to the usual layout used by software ECC. The + seperation of data and out of band area is not longer + possible. The nand driver code handles this layout and + the remaining free bytes in the oob area are managed by + the autoplacement code. Provide a matching oob-layout + in this case. See rts_from4.c and diskonchip.c for + implementation reference. In those cases we must also + use bad block tables on FLASH, because the ECC layout is + interferring with the bad block marker positions. + See bad block table support for details. + </para> + </sect2> + </sect1> + <sect1> + <title>Bad block table support</title> + <para> + Most NAND chips mark the bad blocks at a defined + position in the spare area. Those blocks must + not be erased under any circumstances as the bad + block information would be lost. + It is possible to check the bad block mark each + time when the blocks are accessed by reading the + spare area of the first page in the block. This + is time consuming so a bad block table is used. + </para> + <para> + The nand driver supports various types of bad block + tables. + <itemizedlist> + <listitem><para>Per device</para><para> + The bad block table contains all bad block information + of the device which can consist of multiple chips. + </para> </listitem> + <listitem><para>Per chip</para><para> + A bad block table is used per chip and contains the + bad block information for this particular chip. + </para> </listitem> + <listitem><para>Fixed offset</para><para> + The bad block table is located at a fixed offset + in the chip (device). This applies to various + DiskOnChip devices. + </para> </listitem> + <listitem><para>Automatic placed</para><para> + The bad block table is automatically placed and + detected either at the end or at the beginning + of a chip (device) + </para> </listitem> + <listitem><para>Mirrored tables</para><para> + The bad block table is mirrored on the chip (device) to + allow updates of the bad block table without data loss. + </para> </listitem> + </itemizedlist> + </para> + <para> + nand_scan() calls the function nand_default_bbt(). + nand_default_bbt() selects appropriate default + bad block table desriptors depending on the chip information + which was retrieved by nand_scan(). + </para> + <para> + The standard policy is scanning the device for bad + blocks and build a ram based bad block table which + allows faster access than always checking the + bad block information on the flash chip itself. + </para> + <sect2> + <title>Flash based tables</title> + <para> + It may be desired or neccecary to keep a bad block table in FLASH. + For AG-AND chips this is mandatory, as they have no factory marked + bad blocks. They have factory marked good blocks. The marker pattern + is erased when the block is erased to be reused. So in case of + powerloss before writing the pattern back to the chip this block + would be lost and added to the bad blocks. Therefor we scan the + chip(s) when we detect them the first time for good blocks and + store this information in a bad block table before erasing any + of the blocks. + </para> + <para> + The blocks in which the tables are stored are procteted against + accidental access by marking them bad in the memory bad block + table. The bad block table managment functions are allowed + to circumvernt this protection. + </para> + <para> + The simplest way to activate the FLASH based bad block table support + is to set the option NAND_USE_FLASH_BBT in the option field of + the nand chip structure before calling nand_scan(). For AG-AND + chips is this done by default. + This activates the default FLASH based bad block table functionality + of the NAND driver. The default bad block table options are + <itemizedlist> + <listitem><para>Store bad block table per chip</para></listitem> + <listitem><para>Use 2 bits per block</para></listitem> + <listitem><para>Automatic placement at the end of the chip</para></listitem> + <listitem><para>Use mirrored tables with version numbers</para></listitem> + <listitem><para>Reserve 4 blocks at the end of the chip</para></listitem> + </itemizedlist> + </para> + </sect2> + <sect2> + <title>User defined tables</title> + <para> + User defined tables are created by filling out a + nand_bbt_descr structure and storing the pointer in the + nand_chip structure member bbt_td before calling nand_scan(). + If a mirror table is neccecary a second structure must be + created and a pointer to this structure must be stored + in bbt_md inside the nand_chip structure. If the bbt_md + member is set to NULL then only the main table is used + and no scan for the mirrored table is performed. + </para> + <para> + The most important field in the nand_bbt_descr structure + is the options field. The options define most of the + table properties. Use the predefined constants from + nand.h to define the options. + <itemizedlist> + <listitem><para>Number of bits per block</para> + <para>The supported number of bits is 1, 2, 4, 8.</para></listitem> + <listitem><para>Table per chip</para> + <para>Setting the constant NAND_BBT_PERCHIP selects that + a bad block table is managed for each chip in a chip array. + If this option is not set then a per device bad block table + is used.</para></listitem> + <listitem><para>Table location is absolute</para> + <para>Use the option constant NAND_BBT_ABSPAGE and + define the absolute page number where the bad block + table starts in the field pages. If you have selected bad block + tables per chip and you have a multi chip array then the start page + must be given for each chip in the chip array. Note: there is no scan + for a table ident pattern performed, so the fields + pattern, veroffs, offs, len can be left uninitialized</para></listitem> + <listitem><para>Table location is automatically detected</para> + <para>The table can either be located in the first or the last good + blocks of the chip (device). Set NAND_BBT_LASTBLOCK to place + the bad block table at the end of the chip (device). The + bad block tables are marked and identified by a pattern which + is stored in the spare area of the first page in the block which + holds the bad block table. Store a pointer to the pattern + in the pattern field. Further the length of the pattern has to be + stored in len and the offset in the spare area must be given + in the offs member of the nand_bbt_descr stucture. For mirrored + bad block tables different patterns are mandatory.</para></listitem> + <listitem><para>Table creation</para> + <para>Set the option NAND_BBT_CREATE to enable the table creation + if no table can be found during the scan. Usually this is done only + once if a new chip is found. </para></listitem> + <listitem><para>Table write support</para> + <para>Set the option NAND_BBT_WRITE to enable the table write support. + This allows the update of the bad block table(s) in case a block has + to be marked bad due to wear. The MTD interface function block_markbad + is calling the update function of the bad block table. If the write + support is enabled then the table is updated on FLASH.</para> + <para> + Note: Write support should only be enabled for mirrored tables with + version control. + </para></listitem> + <listitem><para>Table version control</para> + <para>Set the option NAND_BBT_VERSION to enable the table version control. + It's highly recommended to enable this for mirrored tables with write + support. It makes sure that the risk of loosing the bad block + table information is reduced to the loss of the information about the + one worn out block which should be marked bad. The version is stored in + 4 consecutive bytes in the spare area of the device. The position of + the version number is defined by the member veroffs in the bad block table + descriptor.</para></listitem> + <listitem><para>Save block contents on write</para> + <para> + In case that the block which holds the bad block table does contain + other useful information, set the option NAND_BBT_SAVECONTENT. When + the bad block table is written then the whole block is read the bad + block table is updated and the block is erased and everything is + written back. If this option is not set only the bad block table + is written and everything else in the block is ignored and erased. + </para></listitem> + <listitem><para>Number of reserved blocks</para> + <para> + For automatic placement some blocks must be reserved for + bad block table storage. The number of reserved blocks is defined + in the maxblocks member of the babd block table description structure. + Reserving 4 blocks for mirrored tables should be a reasonable number. + This also limits the number of blocks which are scanned for the bad + block table ident pattern. + </para></listitem> + </itemizedlist> + </para> + </sect2> + </sect1> + <sect1> + <title>Spare area (auto)placement</title> + <para> + The nand driver implements different possibilities for + placement of filesystem data in the spare area, + <itemizedlist> + <listitem><para>Placement defined by fs driver</para></listitem> + <listitem><para>Automatic placement</para></listitem> + </itemizedlist> + The default placement function is automatic placement. The + nand driver has built in default placement schemes for the + various chiptypes. If due to hardware ECC functionality the + default placement does not fit then the board driver can + provide a own placement scheme. + </para> + <para> + File system drivers can provide a own placement scheme which + is used instead of the default placement scheme. + </para> + <para> + Placement schemes are defined by a nand_oobinfo structure + <programlisting> +struct nand_oobinfo { + int useecc; + int eccbytes; + int eccpos[24]; + int oobfree[8][2]; +}; + </programlisting> + <itemizedlist> + <listitem><para>useecc</para><para> + The useecc member controls the ecc and placement function. The header + file include/mtd/mtd-abi.h contains constants to select ecc and + placement. MTD_NANDECC_OFF switches off the ecc complete. This is + not recommended and available for testing and diagnosis only. + MTD_NANDECC_PLACE selects caller defined placement, MTD_NANDECC_AUTOPLACE + selects automatic placement. + </para></listitem> + <listitem><para>eccbytes</para><para> + The eccbytes member defines the number of ecc bytes per page. + </para></listitem> + <listitem><para>eccpos</para><para> + The eccpos array holds the byte offsets in the spare area where + the ecc codes are placed. + </para></listitem> + <listitem><para>oobfree</para><para> + The oobfree array defines the areas in the spare area which can be + used for automatic placement. The information is given in the format + {offset, size}. offset defines the start of the usable area, size the + length in bytes. More than one area can be defined. The list is terminated + by an {0, 0} entry. + </para></listitem> + </itemizedlist> + </para> + <sect2> + <title>Placement defined by fs driver</title> + <para> + The calling function provides a pointer to a nand_oobinfo + structure which defines the ecc placement. For writes the + caller must provide a spare area buffer along with the + data buffer. The spare area buffer size is (number of pages) * + (size of spare area). For reads the buffer size is + (number of pages) * ((size of spare area) + (number of ecc + steps per page) * sizeof (int)). The driver stores the + result of the ecc check for each tuple in the spare buffer. + The storage sequence is + </para> + <para> + <spare data page 0><ecc result 0>...<ecc result n> + </para> + <para> + ... + </para> + <para> + <spare data page n><ecc result 0>...<ecc result n> + </para> + <para> + This is a legacy mode used by YAFFS1. + </para> + <para> + If the spare area buffer is NULL then only the ECC placement is + done according to the given scheme in the nand_oobinfo structure. + </para> + </sect2> + <sect2> + <title>Automatic placement</title> + <para> + Automatic placement uses the built in defaults to place the + ecc bytes in the spare area. If filesystem data have to be stored / + read into the spare area then the calling function must provide a + buffer. The buffer size per page is determined by the oobfree array in + the nand_oobinfo structure. + </para> + <para> + If the spare area buffer is NULL then only the ECC placement is + done according to the default builtin scheme. + </para> + </sect2> + <sect2> + <title>User space placement selection</title> + <para> + All non ecc functions like mtd->read and mtd->write use an internal + structure, which can be set by an ioctl. This structure is preset + to the autoplacement default. + <programlisting> + ioctl (fd, MEMSETOOBSEL, oobsel); + </programlisting> + oobsel is a pointer to a user supplied structure of type + nand_oobconfig. The contents of this structure must match the + criteria of the filesystem, which will be used. See an example in utils/nandwrite.c. + </para> + </sect2> + </sect1> + <sect1> + <title>Spare area autoplacement default schemes</title> + <sect2> + <title>256 byte pagesize</title> +<informaltable><tgroup cols="3"><tbody> +<row> +<entry>Offset</entry> +<entry>Content</entry> +<entry>Comment</entry> +</row> +<row> +<entry>0x00</entry> +<entry>ECC byte 0</entry> +<entry>Error correction code byte 0</entry> +</row> +<row> +<entry>0x01</entry> +<entry>ECC byte 1</entry> +<entry>Error correction code byte 1</entry> +</row> +<row> +<entry>0x02</entry> +<entry>ECC byte 2</entry> +<entry>Error correction code byte 2</entry> +</row> +<row> +<entry>0x03</entry> +<entry>Autoplace 0</entry> +<entry></entry> +</row> +<row> +<entry>0x04</entry> +<entry>Autoplace 1</entry> +<entry></entry> +</row> +<row> +<entry>0x05</entry> +<entry>Bad block marker</entry> +<entry>If any bit in this byte is zero, then this block is bad. +This applies only to the first page in a block. In the remaining +pages this byte is reserved</entry> +</row> +<row> +<entry>0x06</entry> +<entry>Autoplace 2</entry> +<entry></entry> +</row> +<row> +<entry>0x07</entry> +<entry>Autoplace 3</entry> +<entry></entry> +</row> +</tbody></tgroup></informaltable> + </sect2> + <sect2> + <title>512 byte pagesize</title> +<informaltable><tgroup cols="3"><tbody> +<row> +<entry>Offset</entry> +<entry>Content</entry> +<entry>Comment</entry> +</row> +<row> +<entry>0x00</entry> +<entry>ECC byte 0</entry> +<entry>Error correction code byte 0 of the lower 256 Byte data in +this page</entry> +</row> +<row> +<entry>0x01</entry> +<entry>ECC byte 1</entry> +<entry>Error correction code byte 1 of the lower 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x02</entry> +<entry>ECC byte 2</entry> +<entry>Error correction code byte 2 of the lower 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x03</entry> +<entry>ECC byte 3</entry> +<entry>Error correction code byte 0 of the upper 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x04</entry> +<entry>reserved</entry> +<entry>reserved</entry> +</row> +<row> +<entry>0x05</entry> +<entry>Bad block marker</entry> +<entry>If any bit in this byte is zero, then this block is bad. +This applies only to the first page in a block. In the remaining +pages this byte is reserved</entry> +</row> +<row> +<entry>0x06</entry> +<entry>ECC byte 4</entry> +<entry>Error correction code byte 1 of the upper 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x07</entry> +<entry>ECC byte 5</entry> +<entry>Error correction code byte 2 of the upper 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x08 - 0x0F</entry> +<entry>Autoplace 0 - 7</entry> +<entry></entry> +</row> +</tbody></tgroup></informaltable> + </sect2> + <sect2> + <title>2048 byte pagesize</title> +<informaltable><tgroup cols="3"><tbody> +<row> +<entry>Offset</entry> +<entry>Content</entry> +<entry>Comment</entry> +</row> +<row> +<entry>0x00</entry> +<entry>Bad block marker</entry> +<entry>If any bit in this byte is zero, then this block is bad. +This applies only to the first page in a block. In the remaining +pages this byte is reserved</entry> +</row> +<row> +<entry>0x01</entry> +<entry>Reserved</entry> +<entry>Reserved</entry> +</row> +<row> +<entry>0x02-0x27</entry> +<entry>Autoplace 0 - 37</entry> +<entry></entry> +</row> +<row> +<entry>0x28</entry> +<entry>ECC byte 0</entry> +<entry>Error correction code byte 0 of the first 256 Byte data in +this page</entry> +</row> +<row> +<entry>0x29</entry> +<entry>ECC byte 1</entry> +<entry>Error correction code byte 1 of the first 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x2A</entry> +<entry>ECC byte 2</entry> +<entry>Error correction code byte 2 of the first 256 Bytes data in +this page</entry> +</row> +<row> +<entry>0x2B</entry> +<entry>ECC byte 3</entry> +<entry>Error correction code byte 0 of the second 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x2C</entry> +<entry>ECC byte 4</entry> +<entry>Error correction code byte 1 of the second 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x2D</entry> +<entry>ECC byte 5</entry> +<entry>Error correction code byte 2 of the second 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x2E</entry> +<entry>ECC byte 6</entry> +<entry>Error correction code byte 0 of the third 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x2F</entry> +<entry>ECC byte 7</entry> +<entry>Error correction code byte 1 of the third 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x30</entry> +<entry>ECC byte 8</entry> +<entry>Error correction code byte 2 of the third 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x31</entry> +<entry>ECC byte 9</entry> +<entry>Error correction code byte 0 of the fourth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x32</entry> +<entry>ECC byte 10</entry> +<entry>Error correction code byte 1 of the fourth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x33</entry> +<entry>ECC byte 11</entry> +<entry>Error correction code byte 2 of the fourth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x34</entry> +<entry>ECC byte 12</entry> +<entry>Error correction code byte 0 of the fifth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x35</entry> +<entry>ECC byte 13</entry> +<entry>Error correction code byte 1 of the fifth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x36</entry> +<entry>ECC byte 14</entry> +<entry>Error correction code byte 2 of the fifth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x37</entry> +<entry>ECC byte 15</entry> +<entry>Error correction code byte 0 of the sixt 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x38</entry> +<entry>ECC byte 16</entry> +<entry>Error correction code byte 1 of the sixt 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x39</entry> +<entry>ECC byte 17</entry> +<entry>Error correction code byte 2 of the sixt 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x3A</entry> +<entry>ECC byte 18</entry> +<entry>Error correction code byte 0 of the seventh 256 Bytes of +data in this page</entry> +</row> +<row> +<entry>0x3B</entry> +<entry>ECC byte 19</entry> +<entry>Error correction code byte 1 of the seventh 256 Bytes of +data in this page</entry> +</row> +<row> +<entry>0x3C</entry> +<entry>ECC byte 20</entry> +<entry>Error correction code byte 2 of the seventh 256 Bytes of +data in this page</entry> +</row> +<row> +<entry>0x3D</entry> +<entry>ECC byte 21</entry> +<entry>Error correction code byte 0 of the eigth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x3E</entry> +<entry>ECC byte 22</entry> +<entry>Error correction code byte 1 of the eigth 256 Bytes of data +in this page</entry> +</row> +<row> +<entry>0x3F</entry> +<entry>ECC byte 23</entry> +<entry>Error correction code byte 2 of the eigth 256 Bytes of data +in this page</entry> +</row> +</tbody></tgroup></informaltable> + </sect2> + </sect1> + </chapter> + + <chapter id="filesystems"> + <title>Filesystem support</title> + <para> + The NAND driver provides all neccecary functions for a + filesystem via the MTD interface. + </para> + <para> + Filesystems must be aware of the NAND pecularities and + restrictions. One major restrictions of NAND Flash is, that you cannot + write as often as you want to a page. The consecutive writes to a page, + before erasing it again, are restricted to 1-3 writes, depending on the + manufacturers specifications. This applies similar to the spare area. + </para> + <para> + Therefor NAND aware filesystems must either write in page size chunks + or hold a writebuffer to collect smaller writes until they sum up to + pagesize. Available NAND aware filesystems: JFFS2, YAFFS. + </para> + <para> + The spare area usage to store filesystem data is controlled by + the spare area placement functionality which is described in one + of the earlier chapters. + </para> + </chapter> + <chapter id="tools"> + <title>Tools</title> + <para> + The MTD project provides a couple of helpful tools to handle NAND Flash. + <itemizedlist> + <listitem><para>flasherase, flasheraseall: Erase and format FLASH partitions</para></listitem> + <listitem><para>nandwrite: write filesystem images to NAND FLASH</para></listitem> + <listitem><para>nanddump: dump the contents of a NAND FLASH partitions</para></listitem> + </itemizedlist> + </para> + <para> + These tools are aware of the NAND restrictions. Please use those tools + instead of complaining about errors which are caused by non NAND aware + access methods. + </para> + </chapter> + + <chapter id="defines"> + <title>Constants</title> + <para> + This chapter describes the constants which might be relevant for a driver developer. + </para> + <sect1> + <title>Chip option constants</title> + <sect2> + <title>Constants for chip id table</title> + <para> + These constants are defined in nand.h. They are ored together to describe + the chip functionality. + <programlisting> +/* Chip can not auto increment pages */ +#define NAND_NO_AUTOINCR 0x00000001 +/* Buswitdh is 16 bit */ +#define NAND_BUSWIDTH_16 0x00000002 +/* Device supports partial programming without padding */ +#define NAND_NO_PADDING 0x00000004 +/* Chip has cache program function */ +#define NAND_CACHEPRG 0x00000008 +/* Chip has copy back function */ +#define NAND_COPYBACK 0x00000010 +/* AND Chip which has 4 banks and a confusing page / block + * assignment. See Renesas datasheet for further information */ +#define NAND_IS_AND 0x00000020 +/* Chip has a array of 4 pages which can be read without + * additional ready /busy waits */ +#define NAND_4PAGE_ARRAY 0x00000040 + </programlisting> + </para> + </sect2> + <sect2> + <title>Constants for runtime options</title> + <para> + These constants are defined in nand.h. They are ored together to describe + the functionality. + <programlisting> +/* Use a flash based bad block table. This option is parsed by the + * default bad block table function (nand_default_bbt). */ +#define NAND_USE_FLASH_BBT 0x00010000 +/* The hw ecc generator provides a syndrome instead a ecc value on read + * This can only work if we have the ecc bytes directly behind the + * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ +#define NAND_HWECC_SYNDROME 0x00020000 + </programlisting> + </para> + </sect2> + </sect1> + + <sect1> + <title>ECC selection constants</title> + <para> + Use these constants to select the ECC algorithm. + <programlisting> +/* No ECC. Usage is not recommended ! */ +#define NAND_ECC_NONE 0 +/* Software ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_SOFT 1 +/* Hardware ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_HW3_256 2 +/* Hardware ECC 3 byte ECC per 512 Byte data */ +#define NAND_ECC_HW3_512 3 +/* Hardware ECC 6 byte ECC per 512 Byte data */ +#define NAND_ECC_HW6_512 4 +/* Hardware ECC 6 byte ECC per 512 Byte data */ +#define NAND_ECC_HW8_512 6 + </programlisting> + </para> + </sect1> + + <sect1> + <title>Hardware control related constants</title> + <para> + These constants describe the requested hardware access function when + the boardspecific hardware control function is called + <programlisting> +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 +/* Set write protection by setting WP to high. Not used! */ +#define NAND_CTL_SETWP 7 +/* Clear write protection by setting WP to low. Not used! */ +#define NAND_CTL_CLRWP 8 + </programlisting> + </para> + </sect1> + + <sect1> + <title>Bad block table related constants</title> + <para> + These constants describe the options used for bad block + table descriptors. + <programlisting> +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_SEARCH 0x00000040 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none axists */ +#define NAND_BBT_CREATE 0x00000200 +/* Search good / bad pattern through all pages of a block */ +#define NAND_BBT_SCANALLPAGES 0x00000400 +/* Scan block empty during good / bad block scan */ +#define NAND_BBT_SCANEMPTY 0x00000800 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00001000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00002000 + </programlisting> + </para> + </sect1> + + </chapter> + + <chapter id="structs"> + <title>Structures</title> + <para> + This chapter contains the autogenerated documentation of the structures which are + used in the NAND driver and might be relevant for a driver developer. Each + struct member has a short description which is marked with an [XXX] identifier. + See the chapter "Documentation hints" for an explanation. + </para> +!Iinclude/linux/mtd/nand.h + </chapter> + + <chapter id="pubfunctions"> + <title>Public Functions Provided</title> + <para> + This chapter contains the autogenerated documentation of the NAND kernel API functions + which are exported. Each function has a short description which is marked with an [XXX] identifier. + See the chapter "Documentation hints" for an explanation. + </para> +!Edrivers/mtd/nand/nand_base.c +!Edrivers/mtd/nand/nand_bbt.c +!Edrivers/mtd/nand/nand_ecc.c + </chapter> + + <chapter id="intfunctions"> + <title>Internal Functions Provided</title> + <para> + This chapter contains the autogenerated documentation of the NAND driver internal functions. + Each function has a short description which is marked with an [XXX] identifier. + See the chapter "Documentation hints" for an explanation. + The functions marked with [DEFAULT] might be relevant for a board driver developer. + </para> +!Idrivers/mtd/nand/nand_base.c +!Idrivers/mtd/nand/nand_bbt.c +!Idrivers/mtd/nand/nand_ecc.c + </chapter> + + <chapter id="credits"> + <title>Credits</title> + <para> + The following people have contributed to the NAND driver: + <orderedlist> + <listitem><para>Steven J. Hill<email>sjhill@realitydiluted.com</email></para></listitem> + <listitem><para>David Woodhouse<email>dwmw2@infradead.org</email></para></listitem> + <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem> + </orderedlist> + A lot of users have provided bugfixes, improvements and helping hands for testing. + Thanks a lot. + </para> + <para> + The following people have contributed to this document: + <orderedlist> + <listitem><para>Thomas Gleixner<email>tglx@linutronix.de</email></para></listitem> + </orderedlist> + </para> + </chapter> +</book> |