Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Unified UDP encapsulation offload methods for drivers, from
    Alexander Duyck.

 2) Make DSA binding more sane, from Andrew Lunn.

 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.

 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.

 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
    packets as soon as the device sees them, with the option to mirror
    the packet on TX via the same interface.  From Brenden Blanco and
    others.

 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.

 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.

 8) Simplify netlink conntrack entry layout, from Florian Westphal.

 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
    Schimmel, Yotam Gigi, and Jiri Pirko.

10) Add SKB array infrastructure and convert tun and macvtap over to it.
    From Michael S Tsirkin and Jason Wang.

11) Support qdisc packet injection in pktgen, from John Fastabend.

12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.

13) Add NV congestion control support to TCP, from Lawrence Brakmo.

14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.

15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.

16) Support MPLS over IPV4, from Simon Horman.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  xgene: Fix build warning with ACPI disabled.
  be2net: perform temperature query in adapter regardless of its interface state
  l2tp: Correctly return -EBADF from pppol2tp_getname.
  net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
  net: ipmr/ip6mr: update lastuse on entry change
  macsec: ensure rx_sa is set when validation is disabled
  tipc: dump monitor attributes
  tipc: add a function to get the bearer name
  tipc: get monitor threshold for the cluster
  tipc: make cluster size threshold for monitoring configurable
  tipc: introduce constants for tipc address validation
  net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
  MAINTAINERS: xgene: Add driver and documentation path
  Documentation: dtb: xgene: Add MDIO node
  dtb: xgene: Add MDIO node
  drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
  drivers: net: xgene: Use exported functions
  drivers: net: xgene: Enable MDIO driver
  drivers: net: xgene: Add backward compatibility
  drivers: net: phy: xgene: Add MDIO driver
  ...

1 files changed, 276 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index 9f4807f90c31..9bbbe7f87d67 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -1,5 +1,279 @@
-Marvell Distributed Switch Architecture Device Tree Bindings
-------------------------------------------------------------
+Distributed Switch Architecture Device Tree Bindings
+----------------------------------------------------
+
+Two bindings exist, one of which has been deprecated due to
+limitations.
+
+Current Binding
+---------------
+
+Switches are true Linux devices and can be probes by any means. Once
+probed, they register to the DSA framework, passing a node
+pointer. This node is expected to fulfil the following binding, and
+may contain additional properties as required by the device it is
+embedded within.
+
+Required properties:
+
+- ports		: A container for child nodes representing switch ports.
+
+Optional properties:
+
+- dsa,member	: A two element list indicates which DSA cluster, and position
+		  within the cluster a switch takes. <0 0> is cluster 0,
+		  switch 0. <0 1> is cluster 0, switch 1. <1 0> is cluster 1,
+		  switch 0. A switch not part of any cluster (single device
+		  hanging off a CPU port) must not specify this property
+
+The ports container has the following properties
+
+Required properties:
+
+- #address-cells	: Must be 1
+- #size-cells		: Must be 0
+
+Each port children node must have the following mandatory properties:
+- reg			: Describes the port address in the switch
+- label			: Describes the label associated with this port, which
+                          will become the netdev name. Special labels are
+			  "cpu" to indicate a CPU port and "dsa" to
+			  indicate an uplink/downlink port between switches in
+			  the cluster.
+
+A port labelled "dsa" has the following mandatory property:
+
+- link			: Should be a list of phandles to other switch's DSA
+			  port. This port is used as the outgoing port
+			  towards the phandle ports. The full routing
+			  information must be given, not just the one hop
+			  routes to neighbouring switches.
+
+A port labelled "cpu" has the following mandatory property:
+
+- ethernet		: Should be a phandle to a valid Ethernet device node.
+                          This host device is what the switch port is
+			  connected to.
+
+Port child nodes may also contain the following optional standardised
+properties, described in binding documents:
+
+- phy-handle		: Phandle to a PHY on an MDIO bus. See
+			  Documentation/devicetree/bindings/net/ethernet.txt
+			  for details.
+
+- phy-mode		: See
+			  Documentation/devicetree/bindings/net/ethernet.txt
+			  for details.
+
+- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
+			  managed entity. See
+			  Documentation/devicetree/bindings/net/fixed-link.txt
+			  for details.
+
+Example
+
+The following example shows three switches on three MDIO busses,
+linked into one DSA cluster.
+
+&mdio1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	switch0: switch0@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				label = "dsa";
+				phy-mode = "rgmii-txid";
+				link = <&switch1port6
+					&switch2port9>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&fec1>;
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&mdio2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	switch1: switch1@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		dsa,member = <0 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&switch1phy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&switch1phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan5";
+				phy-handle = <&switch1phy2>;
+			};
+
+			switch1port5: port@5 {
+				reg = <5>;
+				label = "dsa";
+				link = <&switch2port9>;
+				phy-mode = "rgmii-txid";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			switch1port6: port@6 {
+				reg = <6>;
+				label = "dsa";
+				phy-mode = "rgmii-txid";
+				link = <&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			switch1phy0: switch1phy0@0 {
+				reg = <0>;
+			};
+			switch1phy1: switch1phy0@1 {
+				reg = <1>;
+			};
+			switch1phy2: switch1phy0@2 {
+				reg = <2>;
+			};
+		};
+	 };
+};
+
+&mdio4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	switch2: switch2@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		dsa,member = <0 2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				label = "lan6";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan7";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan8";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "optical3";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					link-gpios = <&gpio6 2
+					      GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "optical4";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					link-gpios = <&gpio6 3
+					      GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			switch2port9: port@9 {
+				reg = <9>;
+				label = "dsa";
+				phy-mode = "rgmii-txid";
+				link = <&switch1port5
+					&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+Deprecated Binding
+------------------
+
+The deprecated binding makes use of a platform device to represent the
+switches. The switches themselves are not Linux devices, and make use
+of an MDIO bus for management.
 
 Required properties:
 - compatible		: Should be "marvell,dsa"