Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 259 insertions, 0 deletions

diff --git a/Documentation/isdn/README.concap b/Documentation/isdn/README.concap
new file mode 100644
index 000000000000..2f114babe4b6
--- /dev/null
+++ b/Documentation/isdn/README.concap
@@ -0,0 +1,259 @@
+Description of the "concap" encapsulation protocol interface
+============================================================
+
+The "concap" interface is intended to be used by network device
+drivers that need to process an encapsulation protocol. 
+It is assumed that the protocol interacts with a linux network device by
+- data transmission
+- connection control (establish, release)
+Thus, the mnemonic: "CONnection CONtrolling eNCAPsulation Protocol".
+
+This is currently only used inside the isdn subsystem. But it might
+also be useful to other kinds of network devices. Thus, if you want
+to suggest changes that improve usability or performance of the
+interface, please let me know. I'm willing to include them in future
+releases (even if I needed to adapt the current isdn code to the
+changed interface).
+
+
+Why is this useful?
+===================
+
+The encapsulation protocol used on top of WAN connections or permanent
+point-to-point links are frequently chosen upon bilateral agreement.
+Thus, a device driver for a certain type of hardware must support
+several different encapsulation protocols at once.
+
+The isdn device driver did already support several different
+encapsulation protocols. The encapsulation protocol is configured by a
+user space utility (isdnctrl). The isdn network interface code then
+uses several case statements which select appropriate actions
+depending on the currently configured encapsulation protocol.
+
+In contrast, LAN network interfaces always used a single encapsulation
+protocol which is unique to the hardware type of the interface. The LAN
+encapsulation is usually done by just sticking a header on the data. Thus,
+traditional linux network device drivers used to process the
+encapsulation protocol directly (usually by just providing a hard_header()
+method in the device structure) using some hardware type specific support
+functions. This is simple, direct and efficient. But it doesn't fit all
+the requirements for complex WAN encapsulations. 
+
+
+   The configurability of the encapsulation protocol to be used
+   makes isdn network interfaces more flexible, but also much more
+   complex than traditional lan network interfaces.
+
+
+Many Encapsulation protocols used on top of WAN connections will not just
+stick a header on the data. They also might need to set up or release
+the WAN connection. They also might want to send other data for their
+private purpose over the wire, e.g. ppp does a lot of link level
+negotiation before the first piece of user data can be transmitted.
+Such encapsulation protocols for WAN devices are typically more complex
+than encapsulation protocols for lan devices. Thus, network interface
+code for typical WAN devices also tends to be more complex.
+
+
+In order to support Linux' x25 PLP implementation on top of
+isdn network interfaces I could have introduced yet another branch to
+the various case statements inside drivers/isdn/isdn_net.c.
+This eventually made isdn_net.c even more complex. In addition, it made
+isdn_net.c harder to maintain. Thus, by identifying an abstract
+interface between the network interface code and the encapsulation
+protocol, complexity could be reduced and maintainability could be
+increased.
+
+
+Likewise, a similar encapsulation protocol will frequently be needed by
+several different interfaces of even different hardware type, e.g. the
+synchronous ppp implementation used by the isdn driver and the
+asynchronous ppp implementation used by the ppp driver have a lot of
+similar code in them. By cleanly separating the encapsulation protocol
+from the hardware specific interface stuff such code could be shared
+better in future.
+
+
+When operating over dial-up-connections (e.g. telephone lines via modem,
+non-permanent virtual circuits of wide area networks, ISDN) many
+encapsulation protocols will need to control the connection. Therefore,
+some basic connection control primitives are supported. The type and
+semantics of the connection (i.e the ISO layer where connection service
+is provided) is outside our scope and might be different depending on
+the encapsulation protocol used, e.g. for a ppp module using our service
+on top of a modem connection a connect_request will result in dialing
+a (somewhere else configured) remote phone number. For an X25-interface
+module (LAPB semantics, as defined in Documentation/networking/x25-iface.txt)
+a connect_request will ask for establishing a reliable lapb
+datalink connection.
+
+
+The encapsulation protocol currently provides the following
+service primitives to the network device.
+
+- create a new encapsulation protocol instance
+- delete encapsulation protocol instance and free all its resources
+- initialize (open) the encapsulation protocol instance for use.
+- deactivate (close) an encapsulation protocol instance.
+- process (xmit) data handed down by upper protocol layer
+- receive data from lower (hardware) layer
+- process connect indication from lower (hardware) layer
+- process disconnect indication from lower (hardware) layer
+
+
+The network interface driver accesses those primitives via callbacks
+provided by the encapsulation protocol instance within a
+struct concap_proto_ops.
+
+struct concap_proto_ops{
+
+	/* create a new encapsulation protocol instance of same type */
+	struct concap_proto *  (*proto_new) (void);
+
+	/* delete encapsulation protocol instance and free all its resources.
+	   cprot may no loger be referenced after calling this */
+	void (*proto_del)(struct concap_proto *cprot);
+
+	/* initialize the protocol's data. To be called at interface startup
+	   or when the device driver resets the interface. All services of the
+	   encapsulation protocol may be used after this*/
+	int (*restart)(struct concap_proto *cprot, 
+		       struct net_device *ndev,
+		       struct concap_device_ops *dops);
+
+	/* deactivate an encapsulation protocol instance. The encapsulation
+	   protocol may not call any *dops methods after this. */
+	int (*close)(struct concap_proto *cprot);
+
+	/* process a frame handed down to us by upper layer */
+	int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called for each data entity received from lower layer*/ 
+	int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb);
+
+	/* to be called when a connection was set up/down.
+	   Protocols that don't process these primitives might fill in
+	   dummy methods here */
+	int (*connect_ind)(struct concap_proto *cprot);
+	int (*disconn_ind)(struct concap_proto *cprot);
+};
+
+
+The data structures are defined in the header file include/linux/concap.h.
+
+
+A Network interface using encapsulation protocols must also provide
+some service primitives to the encapsulation protocol:
+
+- request data being submitted by lower layer (device hardware) 
+- request a connection being set up by lower layer 
+- request a connection being released by lower layer
+
+The encapsulation protocol accesses those primitives via callbacks
+provided by the network interface within a struct concap_device_ops.
+
+struct concap_device_ops{
+
+	/* to request data be submitted by device */ 
+	int (*data_req)(struct concap_proto *, struct sk_buff *);
+
+	/* Control methods must be set to NULL by devices which do not
+	   support connection control. */
+	/* to request a connection be set up */ 
+	int (*connect_req)(struct concap_proto *);
+
+	/* to request a connection be released */
+	int (*disconn_req)(struct concap_proto *);	
+};
+
+The network interface does not explicitly provide a receive service
+because the encapsulation protocol directly calls netif_rx(). 
+
+
+
+
+An encapsulation protocol itself is actually the
+struct concap_proto{
+	struct net_device *net_dev;		/* net device using our service  */
+	struct concap_device_ops *dops; /* callbacks provided by device */
+ 	struct concap_proto_ops  *pops; /* callbacks provided by us */
+	int flags;
+	void *proto_data;               /* protocol specific private data, to
+					   be accessed via *pops methods only*/
+	/*
+	  :
+	  whatever 
+	  :
+	  */
+};
+
+Most of this is filled in when the device requests the protocol to 
+be reset (opend). The network interface must provide the net_dev and
+dops pointers. Other concap_proto members should be considered private
+data that are only accessed by the pops callback functions. Likewise,
+a concap proto should access the network device's private data
+only by means of the callbacks referred to by the dops pointer.
+
+
+A possible extended device structure which uses the connection controlling
+encapsulation services could look like this:
+
+struct concap_device{
+	struct net_device net_dev;
+	struct my_priv  /* device->local stuff */
+			/* the my_priv struct might contain a 
+			   struct concap_device_ops *dops;
+	                   to provide the device specific callbacks
+			*/
+	struct concap_proto *cprot;        /* callbacks provided by protocol */
+};
+
+
+
+Misc Thoughts
+=============
+
+The concept of the concap proto might help to reuse protocol code and
+reduce the complexity of certain network interface implementations.
+The trade off is that it introduces yet another procedure call layer
+when processing the protocol. This has of course some impact on
+performance. However, typically the concap interface will be used by
+devices attached to slow lines (like telephone, isdn, leased synchronous
+lines). For such slow lines, the overhead is probably negligible.
+This might no longer hold for certain high speed WAN links (like
+ATM).
+
+
+If general linux network interfaces explicitly supported concap
+protocols (e.g. by a member struct concap_proto* in struct net_device)
+then the interface of the service function could be changed
+by passing a pointer of type (struct net_device*) instead of
+type (struct concap_proto*). Doing so would make many of the service
+functions compatible to network device support functions.
+
+e.g. instead of the concap protocol's service function
+
+  int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb);
+
+we could have
+
+  int (*encap_and_xmit)(struct net_device *ndev, struct sk_buff *skb);
+
+As this is compatible to the dev->hard_start_xmit() method, the device
+driver could directly register the concap protocol's encap_and_xmit()
+function as its hard_start_xmit() method. This would eliminate one
+procedure call layer.
+
+
+The device's data request function could also be defined as
+ 
+  int (*data_req)(struct net_device *ndev, struct sk_buff *skb);
+
+This might even allow for some protocol stacking. And the network
+interface might even register the same data_req() function directly
+as its hard_start_xmit() method when a zero layer encapsulation
+protocol is configured. Thus, eliminating the performance penalty
+of the concap interface when a trivial concap protocol is used.
+Nevertheless, the device remains able to support encapsulation
+protocol configuration.
+