Documentation: tracing/probes: Add fprobe event tracing document

Add a documentation about fprobe event tracing including
tracepoint probe event and BTF argument.

Link: https://lore.kernel.org/all/168507479345.913472.2804569685436422001.stgit@mhiramat.roam.corp.google.com/

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>

3 files changed, 191 insertions, 0 deletions

diff --git a/Documentation/trace/fprobetrace.rst b/Documentation/trace/fprobetrace.rst
new file mode 100644
index 000000000000..e949bc0cff05
--- /dev/null
+++ b/Documentation/trace/fprobetrace.rst
@@ -0,0 +1,188 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Fprobe-based Event Tracing
+==========================
+
+.. Author: Masami Hiramatsu <mhiramat@kernel.org>
+
+Overview
+--------
+
+Fprobe event is similar to the kprobe event, but limited to probe on
+the function entry and exit only. It is good enough for many use cases
+which only traces some specific functions.
+
+This document also covers tracepoint probe events (tprobe) since this
+is also works only on the tracepoint entry. User can trace a part of
+tracepoint argument, or the tracepoint without trace-event, which is
+not exposed on tracefs.
+
+As same as other dynamic events, fprobe events and tracepoint probe
+events are defined via `dynamic_events` interface file on tracefs.
+
+Synopsis of fprobe-events
+-------------------------
+::
+
+  f[:[GRP1/][EVENT1]] SYM [FETCHARGS]                       : Probe on function entry
+  f[MAXACTIVE][:[GRP1/][EVENT1]] SYM%return [FETCHARGS]     : Probe on function exit
+  t[:[GRP2/][EVENT2]] TRACEPOINT [FETCHARGS]                : Probe on tracepoint
+
+ GRP1           : Group name for fprobe. If omitted, use "fprobes" for it.
+ GRP2           : Group name for tprobe. If omitted, use "tracepoints" for it.
+ EVENT1         : Event name for fprobe. If omitted, the event name is
+                  "SYM__entry" or "SYM__exit".
+ EVENT2         : Event name for tprobe. If omitted, the event name is
+                  the same as "TRACEPOINT", but if the "TRACEPOINT" starts
+                  with a digit character, "_TRACEPOINT" is used.
+ MAXACTIVE      : Maximum number of instances of the specified function that
+                  can be probed simultaneously, or 0 for the default value
+                  as defined in Documentation/trace/fprobes.rst
+
+ FETCHARGS      : Arguments. Each probe can have up to 128 args.
+  ARG           : Fetch "ARG" function argument using BTF (only for function
+                  entry or tracepoint.) (\*1)
+  @ADDR         : Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN       : Fetch Nth entry of stack (N >= 0)
+  $stack        : Fetch stack address.
+  $argN         : Fetch the Nth function argument. (N >= 1) (\*2)
+  $retval       : Fetch return value.(\*3)
+  $comm         : Fetch current task comm.
+  +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*4)(\*5)
+  \IMM          : Store an immediate value to the argument.
+  NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
+  FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
+                  (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types
+                  (x8/x16/x32/x64), "char", "string", "ustring", "symbol", "symstr"
+                  and bitfield are supported.
+
+  (\*1) This is available only when BTF is enabled.
+  (\*2) only for the probe on function entry (offs == 0).
+  (\*3) only for return probe.
+  (\*4) this is useful for fetching a field of data structures.
+  (\*5) "u" means user-space dereference.
+
+For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`.
+
+BTF arguments
+-------------
+BTF (BPF Type Format) argument allows user to trace function and tracepoint
+parameters by its name instead of ``$argN``. This feature is available if the
+kernel is configured with CONFIG_BPF_SYSCALL and CONFIG_DEBUG_INFO_BTF.
+If user only specify the BTF argument, the event's argument name is also
+automatically set by the given name. ::
+
+ # echo 'f:myprobe vfs_read count pos' >> dynamic_events
+ # cat dynamic_events
+ f:fprobes/myprobe vfs_read count=count pos=pos
+
+It also chooses the fetch type from BTF information. For example, in the above
+example, the ``count`` is unsigned long, and the ``pos`` is a pointer. Thus, both
+are converted to 64bit unsigned long, but only ``pos`` has "%Lx" print-format as
+below ::
+
+ # cat events/fprobes/myprobe/format
+ name: myprobe
+ ID: 1313
+ format:
+	field:unsigned short common_type;	offset:0;	size:2;	signed:0;
+	field:unsigned char common_flags;	offset:2;	size:1;	signed:0;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;	signed:0;
+	field:int common_pid;	offset:4;	size:4;	signed:1;
+
+	field:unsigned long __probe_ip;	offset:8;	size:8;	signed:0;
+	field:u64 count;	offset:16;	size:8;	signed:0;
+	field:u64 pos;	offset:24;	size:8;	signed:0;
+
+ print fmt: "(%lx) count=%Lu pos=0x%Lx", REC->__probe_ip, REC->count, REC->pos
+
+If user unsures the name of arguments, ``$arg*`` will be helpful. The ``$arg*``
+is expanded to all function arguments of the function or the tracepoint. ::
+
+ # echo 'f:myprobe vfs_read $arg*' >> dynamic_events
+ # cat dynamic_events
+ f:fprobes/myprobe vfs_read file=file buf=buf count=count pos=pos
+
+BTF also affects the ``$retval``. If user doesn't set any type, the retval type is
+automatically picked from the BTF. If the function returns ``void``, ``$retval``
+is rejected.
+
+Usage examples
+--------------
+Here is an example to add fprobe events on ``vfs_read()`` function entry
+and exit, with BTF arguments.
+::
+
+  # echo 'f vfs_read $arg*' >> dynamic_events
+  # echo 'f vfs_read%return $retval' >> dynamic_events
+  # cat dynamic_events
+ f:fprobes/vfs_read__entry vfs_read file=file buf=buf count=count pos=pos
+ f:fprobes/vfs_read__exit vfs_read%return arg1=$retval
+  # echo 1 > events/fprobes/enable
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] ...1.   335.883195: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883208: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   335.883220: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883224: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   335.883232: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c687a count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   335.883237: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+               sh-70      [000] ...1.   336.050329: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08
+               sh-70      [000] .....   336.050343: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1
+
+You can see all function arguments and return values are recorded as signed int.
+
+Also, here is an example of tracepoint events on ``sched_switch`` tracepoint.
+To compare the result, this also enables the ``sched_switch`` traceevent too.
+::
+
+  # echo 't sched_switch $arg*' >> dynamic_events
+  # echo 1 > events/sched/sched_switch/enable
+  # echo 1 > events/tracepoints/sched_switch/enable
+  # echo > trace
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] d..2.  3912.083993: sched_switch: prev_comm=sh prev_pid=70 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120
+               sh-70      [000] d..3.  3912.083995: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff88800664e100 next=0xffffffff828229c0 prev_state=1
+           <idle>-0       [000] d..2.  3912.084183: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120
+           <idle>-0       [000] d..3.  3912.084184: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0
+      rcu_preempt-16      [000] d..2.  3912.084196: sched_switch: prev_comm=rcu_preempt prev_pid=16 prev_prio=120 prev_state=I ==> next_comm=swapper/0 next_pid=0 next_prio=120
+      rcu_preempt-16      [000] d..3.  3912.084196: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff888004208000 next=0xffffffff828229c0 prev_state=1026
+           <idle>-0       [000] d..2.  3912.085191: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120
+           <idle>-0       [000] d..3.  3912.085191: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0
+
+As you can see, the ``sched_switch`` trace-event shows *cooked* parameters, on
+the other hand, the ``sched_switch`` tracepoint probe event shows *raw*
+parameters. This means you can access any field values in the task
+structure pointed by the ``prev`` and ``next`` arguments.
+
+For example, usually ``task_struct::start_time`` is not traced, but with this
+traceprobe event, you can trace it as below.
+::
+
+  # echo 't sched_switch comm=+1896(next):string start_time=+1728(next):u64' > dynamic_events
+  # head -n 20 trace | tail
+ #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
+ #              | |         |   |||||     |         |
+               sh-70      [000] d..3.  5606.686577: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000
+      rcu_preempt-16      [000] d..3.  5606.686602: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="sh" usage=1 start_time=1596095526
+               sh-70      [000] d..3.  5606.686637: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.687190: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000
+      rcu_preempt-16      [000] d..3.  5606.687202: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
+      kworker/0:1-14      [000] d..3.  5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0
+           <idle>-0       [000] d..3.  5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000
+
+Currently, to find the offset of a specific field in the data structure,
+you need to build kernel with debuginfo and run `perf probe` command with
+`-D` option. e.g.
+::
+
+ # perf probe -D "__probestub_sched_switch next->comm:string next->start_time"
+ p:probe/__probestub_sched_switch __probestub_sched_switch+0 comm=+1896(%cx):string start_time=+1728(%cx):u64
+
+And replace the ``%cx`` with the ``next``.
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index ea25a9220f92..5092d6c13af5 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -13,6 +13,7 @@ Linux Tracing Technologies
    kprobes
    kprobetrace
    uprobetracer
+   fprobetrace
    tracepoints
    events
    events-kmem
diff --git a/Documentation/trace/kprobetrace.rst b/Documentation/trace/kprobetrace.rst
index 651f9ab53f3e..8a2dfee38145 100644
--- a/Documentation/trace/kprobetrace.rst
+++ b/Documentation/trace/kprobetrace.rst
@@ -66,6 +66,8 @@ Synopsis of kprobe_events
   (\*3) this is useful for fetching a field of data structures.
   (\*4) "u" means user-space dereference. See :ref:`user_mem_access`.
 
+.. _kprobetrace_types:
+
 Types
 -----
 Several types are supported for fetchargs. Kprobe tracer will access memory