Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "From the number of commits perspective, the biggest items are ACPICA
  and cpufreq changes with the latter taking the lead (over 50 commits).

  On the cpufreq front, there are many cleanups and minor fixes in the
  core and governors, driver updates etc.  We also have a new cpufreq
  driver for Mediatek MT8173 chips.

  ACPICA mostly updates its debug infrastructure and adds a number of
  fixes and cleanups for a good measure.

  The Operating Performance Points (OPP) framework is updated with new
  DT bindings and support for them among other things.

  We have a few updates of the generic power domains framework and a
  reorganization of the ACPI device enumeration code and bus type
  operations.

  And a lot of fixes and cleanups all over.

  Included is one branch from the MFD tree as it contains some
  PM-related driver core and ACPI PM changes a few other commits are
  based on.

  Specifics:

   - ACPICA update to upstream revision 20150818 including method
     tracing extensions to allow more in-depth AML debugging in the
     kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
     Zheng, Markus Elfring).

   - ACPI sysfs code updates and a documentation update related to AML
     method tracing (Lv Zheng).

   - ACPI EC driver fix related to serialized evaluations of _Qxx
     methods and ACPI tools updates allowing the EC userspace tool to be
     built from the kernel source (Lv Zheng).

   - ACPI processor driver updates preparing it for future introduction
     of CPPC support and ACPI PCC mailbox driver updates (Ashwin
     Chaugule).

   - ACPI interrupts enumeration fix for a regression related to the
     handling of IRQ attribute conflicts between MADT and the ACPI
     namespace (Jiang Liu).

   - Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
     Kasagar).

   - ACPI device registration code reorganization to separate the
     sysfs-related code and bus type operations from the rest (Rafael J
     Wysocki).

   - Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
     Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).

   - ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
     Xinhui, Rafael J Wysocki).

   - cpufreq core cleanups on top of the previous changes allowing it to
     preseve its sysfs directories over system suspend/resume (Viresh
     Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).

   - cpufreq fixes and cleanups related to governors (Viresh Kumar).

   - cpufreq updates (core and the cpufreq-dt driver) related to the
     turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).

   - New DT bindings for Operating Performance Points (OPP), support for
     them in the OPP framework and in the cpufreq-dt driver plus related
     OPP framework fixes and cleanups (Viresh Kumar).

   - cpufreq powernv driver updates (Shilpasri G Bhat).

   - New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).

   - Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
     and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).

   - intel_pstate driver updates including Skylake-S support, support
     for enabling HW P-states per CPU and an additional vendor bypass
     list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).

   - cpuidle core fixes related to the handling of coupled idle states
     (Xunlei Pang).

   - intel_idle driver updates including Skylake Client support and
     support for freeze-mode-specific idle states (Len Brown).

   - Driver core updates related to power management (Andy Shevchenko,
     Rafael J Wysocki).

   - Generic power domains framework fixes and cleanups (Jon Hunter,
     Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).

   - Device PM QoS framework update to allow the latency tolerance
     setting to be exposed to user space via sysfs (Mika Westerberg).

   - devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
     exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).

   - System sleep support updates (Alan Stern, Len Brown, SungEun Kim).

   - rockchip-io AVS support updates (Heiko Stuebner).

   - PM core clocks support fixup (Colin Ian King).

   - Power capping RAPL driver update including support for Skylake H/S
     and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).

   - Generic device properties framework fixes related to the handling
     of static (driver-provided) property sets (Andy Shevchenko).

   - turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
     Shreyas B Prabhu)"

* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
  cpufreq: speedstep-lib: Use monotonic clock
  cpufreq: powernv: Increase the verbosity of OCC console messages
  cpufreq: sfi: use kmemdup rather than duplicating its implementation
  cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
  cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
  cpufreq: remove redundant 'policy' field from user_policy
  cpufreq: remove redundant 'governor' field from user_policy
  cpufreq: update user_policy.* on success
  cpufreq: use memcpy() to copy policy
  cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
  cpufreq: mediatek: Add MT8173 cpufreq driver
  dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
  PM / Domains: Fix typo in description of genpd_dev_pm_detach()
  PM / Domains: Remove unusable governor dummies
  PM / Domains: Make pm_genpd_init() available to modules
  PM / domains: Align column headers and data in pm_genpd_summary output
  powercap / RAPL: disable the 2nd power limit properly
  tools: cpupower: Fix error when running cpupower monitor
  PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
  PM / OPP: Fix static checker warning (broken 64bit big endian systems)
  ...

9 files changed, 352 insertions, 52 deletions

diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
index f6efb1ea559a..c2505eefc878 100644
--- a/Documentation/acpi/method-tracing.txt
+++ b/Documentation/acpi/method-tracing.txt
@@ -1,26 +1,192 @@
-/sys/module/acpi/parameters/:
+ACPICA Trace Facility
 
-trace_method_name
-	The AML method name that the user wants to trace
+Copyright (C) 2015, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
 
-trace_debug_layer
-	The temporary debug_layer used when tracing the method.
-	Using 0xffffffff by default if it is 0.
 
-trace_debug_level
-	The temporary debug_level used when tracing the method.
-	Using 0x00ffffff by default if it is 0.
+Abstract:
 
-trace_state
-	The status of the tracing feature.
+This document describes the functions and the interfaces of the method
+tracing facility.
+
+1. Functionalities and usage examples:
+
+   ACPICA provides method tracing capability. And two functions are
+   currently implemented using this capability.
+
+   A. Log reducer
+   ACPICA subsystem provides debugging outputs when CONFIG_ACPI_DEBUG is
+   enabled. The debugging messages which are deployed via
+   ACPI_DEBUG_PRINT() macro can be reduced at 2 levels - per-component
+   level (known as debug layer, configured via
+   /sys/module/acpi/parameters/debug_layer) and per-type level (known as
+   debug level, configured via /sys/module/acpi/parameters/debug_level).
+
+   But when the particular layer/level is applied to the control method
+   evaluations, the quantity of the debugging outputs may still be too
+   large to be put into the kernel log buffer. The idea thus is worked out
+   to only enable the particular debug layer/level (normally more detailed)
+   logs when the control method evaluation is started, and disable the
+   detailed logging when the control method evaluation is stopped.
+
+   The following command examples illustrate the usage of the "log reducer"
+   functionality:
+   a. Filter out the debug layer/level matched logs when control methods
+      are being evaluated:
+      # cd /sys/module/acpi/parameters
+      # echo "0xXXXXXXXX" > trace_debug_layer
+      # echo "0xYYYYYYYY" > trace_debug_level
+      # echo "enable" > trace_state
+   b. Filter out the debug layer/level matched logs when the specified
+      control method is being evaluated:
+      # cd /sys/module/acpi/parameters
+      # echo "0xXXXXXXXX" > trace_debug_layer
+      # echo "0xYYYYYYYY" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "method" > /sys/module/acpi/parameters/trace_state
+   c. Filter out the debug layer/level matched logs when the specified
+      control method is being evaluated for the first time:
+      # cd /sys/module/acpi/parameters
+      # echo "0xXXXXXXXX" > trace_debug_layer
+      # echo "0xYYYYYYYY" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "method-once" > /sys/module/acpi/parameters/trace_state
+   Where:
+      0xXXXXXXXX/0xYYYYYYYY: Refer to Documentation/acpi/debug.txt for
+			     possible debug layer/level masking values.
+      \PPPP.AAAA.TTTT.HHHH: Full path of a control method that can be found
+			    in the ACPI namespace. It needn't be an entry
+			    of a control method evaluation.
+
+   B. AML tracer
+
+   There are special log entries added by the method tracing facility at
+   the "trace points" the AML interpreter starts/stops to execute a control
+   method, or an AML opcode. Note that the format of the log entries are
+   subject to change:
+     [    0.186427]   exdebug-0398 ex_trace_point        : Method Begin [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
+     [    0.186630]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905c88:If] execution.
+     [    0.186820]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905cc0:LEqual] execution.
+     [    0.187010]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905a20:-NamePath-] execution.
+     [    0.187214]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905a20:-NamePath-] execution.
+     [    0.187407]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905f60:One] execution.
+     [    0.187594]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905f60:One] execution.
+     [    0.187789]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905cc0:LEqual] execution.
+     [    0.187980]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905cc0:Return] execution.
+     [    0.188146]   exdebug-0398 ex_trace_point        : Opcode Begin [0xf5905f60:One] execution.
+     [    0.188334]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905f60:One] execution.
+     [    0.188524]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905cc0:Return] execution.
+     [    0.188712]   exdebug-0398 ex_trace_point        : Opcode End [0xf5905c88:If] execution.
+     [    0.188903]   exdebug-0398 ex_trace_point        : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution.
 
-	"enabled" means this feature is enabled
-	and the AML method is traced every time it's executed.
+   Developers can utilize these special log entries to track the AML
+   interpretion, thus can aid issue debugging and performance tuning. Note
+   that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT()
+   macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling
+   "AML tracer" logs.
 
-	"1" means this feature is enabled and the AML method
-	will only be traced during the next execution.
+   The following command examples illustrate the usage of the "AML tracer"
+   functionality:
+   a. Filter out the method start/stop "AML tracer" logs when control
+      methods are being evaluated:
+      # cd /sys/module/acpi/parameters
+      # echo "0x80" > trace_debug_layer
+      # echo "0x10" > trace_debug_level
+      # echo "enable" > trace_state
+   b. Filter out the method start/stop "AML tracer" when the specified
+      control method is being evaluated:
+      # cd /sys/module/acpi/parameters
+      # echo "0x80" > trace_debug_layer
+      # echo "0x10" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "method" > trace_state
+   c. Filter out the method start/stop "AML tracer" logs when the specified
+      control method is being evaluated for the first time:
+      # cd /sys/module/acpi/parameters
+      # echo "0x80" > trace_debug_layer
+      # echo "0x10" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "method-once" > trace_state
+   d. Filter out the method/opcode start/stop "AML tracer" when the
+      specified control method is being evaluated:
+      # cd /sys/module/acpi/parameters
+      # echo "0x80" > trace_debug_layer
+      # echo "0x10" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "opcode" > trace_state
+   e. Filter out the method/opcode start/stop "AML tracer" when the
+      specified control method is being evaluated for the first time:
+      # cd /sys/module/acpi/parameters
+      # echo "0x80" > trace_debug_layer
+      # echo "0x10" > trace_debug_level
+      # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name
+      # echo "opcode-opcode" > trace_state
 
-	"disabled" means this feature is disabled.
-	Users can enable/disable this debug tracing feature by
-	"echo string > /sys/module/acpi/parameters/trace_state".
-	"string" should be one of "enable", "disable" and "1".
+  Note that all above method tracing facility related module parameters can
+  be used as the boot parameters, for example:
+      acpi.trace_debug_layer=0x80 acpi.trace_debug_level=0x10 \
+      acpi.trace_method_name=\_SB.LID0._LID acpi.trace_state=opcode-once
+
+2. Interface descriptions:
+
+   All method tracing functions can be configured via ACPI module
+   parameters that are accessible at /sys/module/acpi/parameters/:
+
+   trace_method_name
+	The full path of the AML method that the user wants to trace.
+	Note that the full path shouldn't contain the trailing "_"s in its
+	name segments but may contain "\" to form an absolute path.
+
+   trace_debug_layer
+	The temporary debug_layer used when the tracing feature is enabled.
+	Using ACPI_EXECUTER (0x80) by default, which is the debug_layer
+	used to match all "AML tracer" logs.
+
+   trace_debug_level
+	The temporary debug_level used when the tracing feature is enabled.
+	Using ACPI_LV_TRACE_POINT (0x10) by default, which is the
+	debug_level used to match all "AML tracer" logs.
+
+   trace_state
+	The status of the tracing feature.
+	Users can enable/disable this debug tracing feature by executing
+	the following command:
+	    # echo string > /sys/module/acpi/parameters/trace_state
+	Where "string" should be one of the followings:
+	"disable"
+	    Disable the method tracing feature.
+	"enable"
+	    Enable the method tracing feature.
+	    ACPICA debugging messages matching
+	    "trace_debug_layer/trace_debug_level" during any method
+	    execution will be logged.
+	"method"
+	    Enable the method tracing feature.
+	    ACPICA debugging messages matching
+	    "trace_debug_layer/trace_debug_level" during method execution
+	    of "trace_method_name" will be logged.
+	"method-once"
+	    Enable the method tracing feature.
+	    ACPICA debugging messages matching
+	    "trace_debug_layer/trace_debug_level" during method execution
+	    of "trace_method_name" will be logged only once.
+	"opcode"
+	    Enable the method tracing feature.
+	    ACPICA debugging messages matching
+	    "trace_debug_layer/trace_debug_level" during method/opcode
+	    execution of "trace_method_name" will be logged.
+	"opcode-once"
+	    Enable the method tracing feature.
+	    ACPICA debugging messages matching
+	    "trace_debug_layer/trace_debug_level" during method/opcode
+	    execution of "trace_method_name" will be logged only once.
+	Note that, the difference between the "enable" and other feature
+        enabling options are:
+	1. When "enable" is specified, since
+	   "trace_debug_layer/trace_debug_level" shall apply to all control
+	   method evaluations, after configuring "trace_state" to "enable",
+	   "trace_method_name" will be reset to NULL.
+	2. When "method/opcode" is specified, if
+	   "trace_method_name" is NULL when "trace_state" is configured to
+	   these options, the "trace_debug_layer/trace_debug_level" will
+	   apply to all control method evaluations.
diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
index 70933eadc308..ba78e7c2a069 100644
--- a/Documentation/cpu-freq/core.txt
+++ b/Documentation/cpu-freq/core.txt
@@ -55,16 +55,13 @@ transition notifiers.
 ----------------------------
 
 These are notified when a new policy is intended to be set. Each
-CPUFreq policy notifier is called three times for a policy transition:
+CPUFreq policy notifier is called twice for a policy transition:
 
 1.) During CPUFREQ_ADJUST all CPUFreq notifiers may change the limit if
     they see a need for this - may it be thermal considerations or
     hardware limitations.
 
-2.) During CPUFREQ_INCOMPATIBLE only changes may be done in order to avoid
-    hardware failure.
-
-3.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
+2.) And during CPUFREQ_NOTIFY all notifiers are informed of the new policy
    - if two hardware drivers failed to agree on a new policy before this
    stage, the incompatible hardware shall be shut down, and the user
    informed of this.
diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
new file mode 100644
index 000000000000..52b457c23eed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
@@ -0,0 +1,83 @@
+Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+
+Example:
+--------
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
index b54bf3a2ff57..3e36c1d11386 100644
--- a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -11,15 +11,14 @@ to various devfreq devices. The devfreq devices would use the event data when
 derterming the current state of each IP.
 
 Required properties:
-- compatible: Should be "samsung,exynos-ppmu".
+- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
 - reg: physical base address of each PPMU and length of memory mapped region.
 
 Optional properties:
 - clock-names : the name of clock used by the PPMU, "ppmu"
 - clocks : phandles for clock specified in "clock-names" property
-- #clock-cells: should be 1.
 
-Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
 
 		ppmu_dmc0: ppmu_dmc0@106a0000 {
 			compatible = "samsung,exynos-ppmu";
@@ -108,3 +107,41 @@ Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
 			};
 		};
 	};
+
+Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
+
+		ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10480000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d0_general: ppmu_d0_general@10490000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10490000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d0_rt: ppmu_d0_rt@104a0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_general: ppmu_d1_general@104c0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_rt: ppmu_d1_rt@104d0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104d0000 0x2000>;
+			status = "disabled";
+		};
diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 0d5e7c978121..0cb44dc21f97 100644
--- a/Documentation/devicetree/bindings/power/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -88,7 +88,7 @@ This defines voltage-current-frequency combinations along with other related
 properties.
 
 Required properties:
-- opp-hz: Frequency in Hz
+- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer.
 
 Optional properties:
 - opp-microvolt: voltage in micro Volts.
@@ -158,20 +158,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 		opp-shared;
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp01 {
-			opp-hz = <1100000000>;
+			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
 		opp02 {
-			opp-hz = <1200000000>;
+			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			clock-latency-ns = <290000>;
 			turbo-mode;
@@ -237,20 +237,20 @@ independently.
 		 */
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp01 {
-			opp-hz = <1100000000>;
+			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
 		opp02 {
-			opp-hz = <1200000000>;
+			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000;
 			lock-latency-ns = <290000>;
@@ -313,20 +313,20 @@ DVFS state together.
 		opp-shared;
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
 		opp01 {
-			opp-hz = <1100000000>;
+			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
 		opp02 {
-			opp-hz = <1200000000>;
+			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000>;
 			clock-latency-ns = <290000>;
@@ -339,20 +339,20 @@ DVFS state together.
 		opp-shared;
 
 		opp10 {
-			opp-hz = <1300000000>;
+			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1045000 1050000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
 		};
 		opp11 {
-			opp-hz = <1400000000>;
+			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1075000>;
 			opp-microamp = <100000>;
 			clock-latency-ns = <400000>;
 		};
 		opp12 {
-			opp-hz = <1500000000>;
+			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1010000 1100000 1110000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
@@ -379,7 +379,7 @@ Example 4: Handling multiple regulators
 		opp-shared;
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000>, /* Supply 0 */
 					<960000>, /* Supply 1 */
 					<960000>; /* Supply 2 */
@@ -392,7 +392,7 @@ Example 4: Handling multiple regulators
 		/* OR */
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
 					<960000 965000 975000>; /* Supply 2 */
@@ -405,7 +405,7 @@ Example 4: Handling multiple regulators
 		/* OR */
 
 		opp00 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
 					<960000 965000 975000>; /* Supply 2 */
@@ -437,12 +437,12 @@ Example 5: Multiple OPP tables
 		opp-shared;
 
 		opp00 {
-			opp-hz = <600000000>;
+			opp-hz = /bits/ 64 <600000000>;
 			...
 		};
 
 		opp01 {
-			opp-hz = <800000000>;
+			opp-hz = /bits/ 64 <800000000>;
 			...
 		};
 	};
@@ -453,12 +453,12 @@ Example 5: Multiple OPP tables
 		opp-shared;
 
 		opp10 {
-			opp-hz = <1000000000>;
+			opp-hz = /bits/ 64 <1000000000>;
 			...
 		};
 
 		opp11 {
-			opp-hz = <1100000000>;
+			opp-hz = /bits/ 64 <1100000000>;
 			...
 		};
 	};
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 0f8ed3710c66..025b5e7df61c 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -48,7 +48,7 @@ Example 2:
 		#power-domain-cells = <1>;
 	};
 
-	child: power-controller@12340000 {
+	child: power-controller@12341000 {
 		compatible = "foo,power-controller";
 		reg = <0x12341000 0x1000>;
 		power-domains = <&parent 0>;
diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 8b70db103ca7..b8627e763dba 100644
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -33,6 +33,8 @@ Required properties:
 - compatible: should be one of:
   - "rockchip,rk3188-io-voltage-domain" for rk3188
   - "rockchip,rk3288-io-voltage-domain" for rk3288
+  - "rockchip,rk3368-io-voltage-domain" for rk3368
+  - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
 - rockchip,grf: phandle to the syscon managing the "general register files"
 
 
@@ -64,6 +66,18 @@ Possible supplies for rk3288:
 - sdcard-supply: The supply connected to SDMMC0_VDD.
 - wifi-supply:   The supply connected to APIO3_VDD.  Also known as SDIO0.
 
+Possible supplies for rk3368:
+- audio-supply:  The supply connected to APIO3_VDD.
+- dvp-supply:    The supply connected to DVPIO_VDD.
+- flash0-supply: The supply connected to FLASH0_VDD.  Typically for eMMC
+- gpio30-supply: The supply connected to APIO1_VDD.
+- gpio1830       The supply connected to APIO4_VDD.
+- sdcard-supply: The supply connected to SDMMC0_VDD.
+- wifi-supply:   The supply connected to APIO2_VDD.  Also known as SDIO0.
+
+Possible supplies for rk3368 pmu-domains:
+- pmu-supply:    The supply connected to PMUIO_VDD.
+- vop-supply:    The supply connected to LCDC_VDD.
 
 Example:
 
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index d172bce0fd49..8ba6625fdd63 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -341,6 +341,13 @@ the phases are:
 	and is entirely responsible for bringing the device back to the
 	functional state as appropriate.
 
+	Note that this direct-complete procedure applies even if the device is
+	disabled for runtime PM; only the runtime-PM status matters.  It follows
+	that if a device has system-sleep callbacks but does not support runtime
+	PM, then its prepare callback must never return a positive value.  This
+	is because all devices are initially set to runtime-suspended with
+	runtime PM disabled.
+
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the
 	appropriate low-power state, depending on the bus type the device is on,
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index e76dc0ad4d2b..0784bc3a2ab5 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -445,10 +445,6 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
   bool pm_runtime_status_suspended(struct device *dev);
     - return true if the device's runtime PM status is 'suspended'
 
-  bool pm_runtime_suspended_if_enabled(struct device *dev);
-    - return true if the device's runtime PM status is 'suspended' and its
-      'power.disable_depth' field is equal to 1
-
   void pm_runtime_allow(struct device *dev);
     - set the power.runtime_auto flag for the device and decrease its usage
       counter (used by the /sys/devices/.../power/control interface to