phy: Add driver to support individual USB PHYs on sun9i

Unlike previous Allwinner SoCs, there is no central PHY control block
on the A80. Also, OTG support is completely split off into a different
controller.

This adds a new driver to support the regular USB PHYs.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
new file mode 100644
index 000000000000..1cca85c709d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt
@@ -0,0 +1,38 @@
+Allwinner sun9i USB PHY
+-----------------------
+
+Required properties:
+- compatible : should be one of
+  * allwinner,sun9i-a80-usb-phy
+- reg : a list of offset + length pairs
+- #phy-cells : from the generic phy bindings, must be 0
+- phy_type : "hsic" for HSIC usage;
+	     other values or absence of this property indicates normal USB
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names : depending on the "phy_type" property,
+  * "phy" for normal USB
+  * "hsic_480M", "hsic_12M" for HSIC
+- resets : a list of phandle + reset specifier pairs
+- reset-names : depending on the "phy_type" property,
+  * "phy" for normal USB
+  * "hsic" for HSIC
+
+Optional Properties:
+- phy-supply : from the generic phy bindings, a phandle to a regulator that
+	       provides power to VBUS.
+
+It is recommended to list all clocks and resets available.
+The driver will only use those matching the phy_type.
+
+Example:
+	usbphy1: phy@00a01800 {
+		compatible = "allwinner,sun9i-a80-usb-phy";
+		reg = <0x00a01800 0x4>;
+		clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+		       <&usb_phy_clk 3>;
+		clock-names = "hsic_480M", "hsic_12M", "phy";
+		resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+		reset-names = "hsic", "phy";
+		status = "disabled";
+		#phy-cells = <0>;
+	};