scripts/spelling.txt: add "followings" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 files changed, 15 insertions, 15 deletions

diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index d7fcdc5a4379..0320910b866d 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -1020,7 +1020,7 @@ and other resources, etc.
 	</itemizedlist>
 
 	<para>
-	Of errors detected as above, the followings are not ATA/ATAPI
+	Of errors detected as above, the following are not ATA/ATAPI
 	device errors but ATA bus errors and should be handled
 	according to <xref linkend="excatATAbusErr"/>.
 	</para>
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
index c2505eefc878..0aba14c8f459 100644
--- a/Documentation/acpi/method-tracing.txt
+++ b/Documentation/acpi/method-tracing.txt
@@ -152,7 +152,7 @@ tracing facility.
 	Users can enable/disable this debug tracing feature by executing
 	the following command:
 	    # echo string > /sys/module/acpi/parameters/trace_state
-	Where "string" should be one of the followings:
+	Where "string" should be one of the following:
 	"disable"
 	    Disable the method tracing feature.
 	"enable"
diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt
index 1f610ecf698a..f7e050551487 100644
--- a/Documentation/blockdev/mflash.txt
+++ b/Documentation/blockdev/mflash.txt
@@ -17,7 +17,7 @@ driver and currently works well under standard IDE subsystem. Actually it's
 one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
 IDE interface.
 
-Followings are brief descriptions about IO mode.
+Following are brief descriptions about IO mode.
 A. IO mode based on ATA protocol and uses some custom command. (read confirm,
 write confirm)
 B. IO mode uses SRAM bus interface.
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index 7aa840c8768d..ae4234ca4ee4 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -1,7 +1,7 @@
 * Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
 
 Required properties:
-- compatible: could be one of the followings
+- compatible: could be one of the following:
 	"marvell,armada-370-neta"
 	"marvell,armada-xp-neta"
 	"marvell,armada-3700-neta"
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 7c85dca4221a..2fd688c8dbdb 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on
 the pins includes drive strength and pull-up.
 
 Required properties:
-- compatible: Should be one of the followings (depending on you SoC):
+- compatible: Should be one of the following (depending on your SoC):
   "allwinner,sun4i-a10-pinctrl"
   "allwinner,sun5i-a10s-pinctrl"
   "allwinner,sun5i-a13-pinctrl"
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
index c6e62cb30712..a0685c209218 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
@@ -10,7 +10,7 @@ From RK3368 SoCs, the GRF is divided into two sections,
 
 Required Properties:
 
-- compatible: GRF should be one of the followings
+- compatible: GRF should be one of the following:
    - "rockchip,rk3036-grf", "syscon": for rk3036
    - "rockchip,rk3066-grf", "syscon": for rk3066
    - "rockchip,rk3188-grf", "syscon": for rk3188
@@ -18,7 +18,7 @@ Required Properties:
    - "rockchip,rk3288-grf", "syscon": for rk3288
    - "rockchip,rk3368-grf", "syscon": for rk3368
    - "rockchip,rk3399-grf", "syscon": for rk3399
-- compatible: PMUGRF should be one of the followings
+- compatible: PMUGRF should be one of the following:
    - "rockchip,rk3368-pmugrf", "syscon": for rk3368
    - "rockchip,rk3399-pmugrf", "syscon": for rk3399
 - compatible: SGRF should be one of the following
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 4ea29aa9af59..a6600f6dea64 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
 
 Required properties:
 
-- compatible: should be one of the followings
+- compatible: should be one of the following:
    - "rockchip,rk3066-i2s": for rk3066
    - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
    - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
@@ -17,7 +17,7 @@ Required properties:
 	Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: should include "tx" and "rx".
 - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
    - "i2s_hclk": clock for I2S BUS
    - "i2s_clk" : clock for I2S controller
 - rockchip,playback-channels: max playback channels, if not set, 8 channels default.
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 3033bd8aab0f..3863531d1e6d 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,7 +14,7 @@ Required properties:
 - dma-names: should include "tx" and "rx".
 - clocks: a list of phandle + clock-specifer pairs, one for each entry
   in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
 
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index f4adc58f82ba..ee21da865771 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
 
 Required properties:
 
-- compatible: should be one of the followings
+- compatible: should be one of the following:
    - "allwinner,sun4i-a10-i2s"
    - "allwinner,sun6i-a31-i2s"
 - reg: physical base address of the controller and length of memory mapped
@@ -15,7 +15,7 @@ Required properties:
 	Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: should include "tx" and "rx".
 - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
    - "apb" : clock for the I2S bus interface
    - "mod" : module clock for the I2S controller
 - #sound-dai-cells : Must be equal to 0
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 5de846d3ecc0..670f3ded0802 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -114,11 +114,11 @@ config options.
     Memory model -> Sparse Memory  (CONFIG_SPARSEMEM)
     Allow for memory hot-add       (CONFIG_MEMORY_HOTPLUG)
 
-- To enable memory removal, the followings are also necessary
+- To enable memory removal, the following are also necessary
     Allow for memory hot remove    (CONFIG_MEMORY_HOTREMOVE)
     Page Migration                 (CONFIG_MIGRATION)
 
-- For ACPI memory hotplug, the followings are also necessary
+- For ACPI memory hotplug, the following are also necessary
     Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
     This option can be kernel module.
 
diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst
index 168d0cfab1ce..9eeb9b468706 100644
--- a/Documentation/sound/hd-audio/notes.rst
+++ b/Documentation/sound/hd-audio/notes.rst
@@ -697,7 +697,7 @@ If it's a regression, at best, send alsa-info outputs of both working
 and non-working kernels.  This is really helpful because we can
 compare the codec registers directly.
 
-Send a bug report either the followings:
+Send a bug report either the following:
 
 kernel-bugzilla
     https://bugzilla.kernel.org/