ARM: ixp4xx: Delete Gateway WG302v2 boardfiles

This board is replaced with the corresponding device tree.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 0 insertions, 184 deletions

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4f233c509f6d..04165bffa27a 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -49,14 +49,6 @@ config MACH_GATEWAY7001
 	  7001 Access Point. For more information on this platform,
 	  see http://openwrt.org
 
-config MACH_WG302V2
-	bool "Netgear WG302 v2 / WAG302 v2"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support Netgear's
-	  WG302 v2 or WAG302 v2 Access Points. For more information
-	  on this platform, see http://openwrt.org
-
 config ARCH_IXDP425
 	bool "IXDP425"
 	depends on IXP4XX_PCI_LEGACY
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 4ef8629579ef..738a37ccc7a1 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -15,7 +15,6 @@ obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
 obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
 obj-pci-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-pci.o
 
@@ -27,7 +26,6 @@ obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
 obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
deleted file mode 100644
index 1247e7c67bc0..000000000000
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/wg302v2-pci.c
- *
- * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Software, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init wg302v2_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO8;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO9;
-	else return -1;
-}
-
-struct hw_pci wg302v2_pci __initdata = {
-	.nr_controllers = 1,
-	.ops = &ixp4xx_ops,
-	.preinit =        wg302v2_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        wg302v2_map_irq,
-};
-
-int __init wg302v2_pci_init(void)
-{
-	if (machine_is_wg302v2())
-		pci_common_init(&wg302v2_pci);
-	return 0;
-}
-
-subsys_initcall(wg302v2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
deleted file mode 100644
index 8711e299229b..000000000000
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/wg302-setup.c
- *
- * Board setup for the Netgear WG302 v2 and WAG302 v2
- *
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <kaloz@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data wg302v2_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource wg302v2_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device wg302v2_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &wg302v2_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_flash_resource,
-};
-
-static struct resource wg302v2_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port wg302v2_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device wg302v2_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= wg302v2_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &wg302v2_uart_resource,
-};
-
-static struct platform_device *wg302v2_devices[] __initdata = {
-	&wg302v2_flash,
-	&wg302v2_uart,
-};
-
-static void __init wg302v2_init(void)
-{
-	ixp4xx_sys_init();
-
-	wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
-}
-
-#ifdef CONFIG_MACH_WG302V2
-MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= wg302v2_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif