manual merge for pm-hwmod-uart due to conflicts

13 files changed, 1210 insertions, 279 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1c4b2377862b..91dd215d05f0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select PM_RUNTIME
 	select VFP
 	select NEON if ARCH_OMAP3 || ARCH_OMAP4
-	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
-	select SERIAL_8250_CONSOLE
+	select SERIAL_OMAP
+	select SERIAL_OMAP_CONSOLE
 	select I2C
 	select I2C_OMAP
 	select MFD
@@ -222,12 +221,18 @@ config MACH_OMAP_ZOOM2
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBP
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index b359c3f7bb39..d5104519ab03 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -208,7 +208,6 @@ static struct flash_partitions sdp_flash_partitions[] = {
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index e5eac46bbac9..35066b355bd5 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -283,4 +283,5 @@ void __init zoom_peripherals_init(void)
 	omap_i2c_init();
 	usb_musb_init(&musb_board_data);
 	enable_board_wakeup_source();
+	omap_serial_init();
 }
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index c73906d17458..ba01ec0cae45 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -2465,6 +2465,16 @@ static struct clk uart3_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk uart4_fck = {
+	.name		= "uart4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -2715,6 +2725,16 @@ static struct clk uart3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk uart4_ick = {
+	.name		= "uart4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3630_EN_UART4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk gpt9_ick = {
 	.name		= "gpt9_ick",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -3349,6 +3369,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
+	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
 	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
 	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
 	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
@@ -3372,6 +3393,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_3XXX),
 	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_3XXX),
+	CLK(NULL,	"uart4_ick",	&uart4_ick,	CK_36XX),
 	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_3XXX),
 	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_3XXX),
 	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index fe82b79d5f3b..4f959a7d881c 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -649,6 +649,8 @@
 #define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
+#define OMAP3630_AUTO_UART4_MASK			(1 << 18)
+#define OMAP3630_AUTO_UART4_SHIFT			18
 #define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
 #define OMAP3430_AUTO_GPIO6_SHIFT			17
 #define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index 66678d98ad96..adf6e3632a2b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -15,6 +15,7 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -73,6 +74,9 @@ static struct omap_hwmod omap2420_l3_main_hwmod = {
 };
 
 static struct omap_hwmod omap2420_l4_wkup_hwmod;
+static struct omap_hwmod omap2420_uart1_hwmod;
+static struct omap_hwmod omap2420_uart2_hwmod;
+static struct omap_hwmod omap2420_uart3_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
@@ -81,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART1_BASE,
+		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap2420_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART2_BASE,
+		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap2420_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART3_BASE,
+		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap2420_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
 	&omap2420_l3_main__l4_core,
@@ -89,6 +147,9 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
 /* Master interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
 	&omap2420_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
 };
 
 /* L4 CORE */
@@ -228,6 +289,135 @@ static struct omap_hwmod omap2420_wd_timer2_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
+/* UART */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
+	&omap2_l4_core__uart1,
+};
+
+static struct omap_hwmod omap2420_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
+	&omap2_l4_core__uart2,
+};
+
+static struct omap_hwmod omap2420_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
+	&omap2_l4_core__uart3,
+};
+
+static struct omap_hwmod omap2420_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 2,
+			.module_bit = OMAP24XX_EN_UART3_SHIFT,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap2420_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_l3_main_hwmod,
 	&omap2420_l4_core_hwmod,
@@ -235,6 +425,9 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_mpu_hwmod,
 	&omap2420_iva_hwmod,
 	&omap2420_wd_timer2_hwmod,
+	&omap2420_uart1_hwmod,
+	&omap2420_uart2_hwmod,
+	&omap2420_uart3_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 7ec927aa23de..12d939e456cf 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -15,6 +15,7 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -73,6 +74,9 @@ static struct omap_hwmod omap2430_l3_main_hwmod = {
 };
 
 static struct omap_hwmod omap2430_l4_wkup_hwmod;
+static struct omap_hwmod omap2430_uart1_hwmod;
+static struct omap_hwmod omap2430_uart2_hwmod;
+static struct omap_hwmod omap2430_uart3_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@@ -81,6 +85,60 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART1_BASE,
+		.pa_end		= OMAP2_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap2430_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART2_BASE,
+		.pa_end		= OMAP2_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap2430_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP2_UART3_BASE,
+		.pa_end		= OMAP2_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap2430_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
 	&omap2430_l3_main__l4_core,
@@ -106,6 +164,9 @@ static struct omap_hwmod omap2430_l4_core_hwmod = {
 /* Slave interfaces on the L4_WKUP interconnect */
 static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
 	&omap2430_l4_core__l4_wkup,
+	&omap2_l4_core__uart1,
+	&omap2_l4_core__uart2,
+	&omap2_l4_core__uart3,
 };
 
 /* Master interfaces on the L4_WKUP interconnect */
@@ -228,6 +289,135 @@ static struct omap_hwmod omap2430_wd_timer2_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/* UART */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
+	&omap2_l4_core__uart1,
+};
+
+static struct omap_hwmod omap2430_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
+	&omap2_l4_core__uart2,
+};
+
+static struct omap_hwmod omap2430_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
+	&omap2_l4_core__uart3,
+};
+
+static struct omap_hwmod omap2430_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 2,
+			.module_bit = OMAP24XX_EN_UART3_SHIFT,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap2430_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
@@ -235,6 +425,9 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_mpu_hwmod,
 	&omap2430_iva_hwmod,
 	&omap2430_wd_timer2_hwmod,
+	&omap2430_uart1_hwmod,
+	&omap2430_uart2_hwmod,
+	&omap2430_uart3_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5bfe9c933144..cb97ecf0a3f6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -17,6 +17,7 @@
 #include <mach/irqs.h>
 #include <plat/cpu.h>
 #include <plat/dma.h>
+#include <plat/serial.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -84,6 +85,10 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod = {
 };
 
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
+static struct omap_hwmod omap3xxx_uart1_hwmod;
+static struct omap_hwmod omap3xxx_uart2_hwmod;
+static struct omap_hwmod omap3xxx_uart3_hwmod;
+static struct omap_hwmod omap3xxx_uart4_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
@@ -92,6 +97,78 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART1_BASE,
+		.pa_end		= OMAP3_UART1_BASE + SZ_8K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart1_hwmod,
+	.clk		= "uart1_ick",
+	.addr		= omap3xxx_uart1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART2_BASE,
+		.pa_end		= OMAP3_UART2_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_uart2_hwmod,
+	.clk		= "uart2_ick",
+	.addr		= omap3xxx_uart2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART3_BASE,
+		.pa_end		= OMAP3_UART3_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_uart3_hwmod,
+	.clk		= "uart3_ick",
+	.addr		= omap3xxx_uart3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART4 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
+	{
+		.pa_start	= OMAP3_UART4_BASE,
+		.pa_end		= OMAP3_UART4_BASE + SZ_1K - 1,
+		.flags		= ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_uart4_hwmod,
+	.clk		= "uart4_ick",
+	.addr		= omap3xxx_uart4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_uart4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
 	&omap3xxx_l3_main__l4_core,
@@ -100,6 +177,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
 /* Master interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
 	&omap3xxx_l4_core__l4_wkup,
+	&omap3_l4_core__uart1,
+	&omap3_l4_core__uart2,
 };
 
 /* L4 CORE */
@@ -121,6 +200,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
 
 /* Master interfaces on the L4_PER interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
+	&omap3_l4_per__uart3,
+	&omap3_l4_per__uart4,
 };
 
 /* L4 PER */
@@ -262,6 +343,172 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/* UART common */
+
+static struct omap_hwmod_class_sysconfig uart_sysc = {
+	.rev_offs	= 0x50,
+	.sysc_offs	= 0x54,
+	.syss_offs	= 0x58,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class uart_class = {
+	.name = "uart",
+	.sysc = &uart_sysc,
+};
+
+/* UART1 */
+
+static struct omap_hwmod_irq_info uart1_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart1_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART1_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART1_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
+	&omap3_l4_core__uart1,
+};
+
+static struct omap_hwmod omap3xxx_uart1_hwmod = {
+	.name		= "uart1",
+	.mpu_irqs	= uart1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart1_mpu_irqs),
+	.sdma_reqs	= uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart1_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART2 */
+
+static struct omap_hwmod_irq_info uart2_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart2_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART2_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART2_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
+	&omap3_l4_core__uart2,
+};
+
+static struct omap_hwmod omap3xxx_uart2_hwmod = {
+	.name		= "uart2",
+	.mpu_irqs	= uart2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart2_mpu_irqs),
+	.sdma_reqs	= uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart2_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART3 */
+
+static struct omap_hwmod_irq_info uart3_mpu_irqs[] = {
+	{ .irq = INT_24XX_UART3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart3_sdma_reqs[] = {
+	{ .name = "tx",	.dma_req = OMAP24XX_DMA_UART3_TX, },
+	{ .name = "rx",	.dma_req = OMAP24XX_DMA_UART3_RX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
+	&omap3_l4_per__uart3,
+};
+
+static struct omap_hwmod omap3xxx_uart3_hwmod = {
+	.name		= "uart3",
+	.mpu_irqs	= uart3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart3_mpu_irqs),
+	.sdma_reqs	= uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = OMAP3430_PER_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART3_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart3_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* UART4 */
+
+static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
+	{ .irq = INT_36XX_UART4_IRQ, },
+};
+
+static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
+	{ .name = "rx",	.dma_req = OMAP36XX_DMA_UART4_RX, },
+	{ .name = "tx",	.dma_req = OMAP36XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
+	&omap3_l4_per__uart4,
+};
+
+static struct omap_hwmod omap3xxx_uart4_hwmod = {
+	.name		= "uart4",
+	.mpu_irqs	= uart4_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(uart4_mpu_irqs),
+	.sdma_reqs	= uart4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(uart4_sdma_reqs),
+	.main_clk	= "uart4_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = OMAP3430_PER_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3630_EN_UART4_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_uart4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_uart4_slaves),
+	.class		= &uart_class,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
@@ -270,6 +517,10 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_mpu_hwmod,
 	&omap3xxx_iva_hwmod,
 	&omap3xxx_wd_timer2_hwmod,
+	&omap3xxx_uart1_hwmod,
+	&omap3xxx_uart2_hwmod,
+	&omap3xxx_uart3_hwmod,
+	&omap3xxx_uart4_hwmod,
 	NULL,
 };
 
@@ -277,5 +528,3 @@ int __init omap3xxx_hwmod_init(void)
 {
 	return omap_hwmod_init(omap3xxx_hwmods);
 }
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 9523b4c9537f..7274db4de487 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -468,6 +468,21 @@ static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
+/*
+ * 'uart' class
+ * universal asynchronous receiver/transmitter (uart)
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
 	.name = "wd_timer",
 	.sysc = &omap44xx_wd_timer_sysc,
@@ -487,6 +502,82 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
 	},
 };
 
+static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
+	.name = "uart",
+	.sysc = &omap44xx_uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod omap44xx_uart1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
+	{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
+	{
+		.pa_start	= 0x4806a000,
+		.pa_end		= 0x4806a0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
+	&omap44xx_l4_per__uart1,
+};
+
+static struct omap_hwmod omap44xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart1_irqs),
+	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart2 */
+static struct omap_hwmod omap44xx_uart2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
+	{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
+	{
+		.pa_start	= 0x4806c000,
+		.pa_end		= 0x4806c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
 /* l4_wkup -> wd_timer2 */
 static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
 	.master		= &omap44xx_l4_wkup_hwmod,
@@ -532,6 +623,58 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
 	},
 };
 
+/* l4_per -> uart2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
+	&omap44xx_l4_per__uart2,
+};
+
+static struct omap_hwmod omap44xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart2_irqs),
+	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart3 */
+static struct omap_hwmod omap44xx_uart3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
+	{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
+	{
+		.pa_start	= 0x48020000,
+		.pa_end		= 0x480200ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
 /* l4_abe -> wd_timer3 */
 static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
 	.master		= &omap44xx_l4_abe_hwmod,
@@ -551,6 +694,59 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
 	},
 };
 
+/* l4_per -> uart3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
+	&omap44xx_l4_per__uart3,
+};
+
+static struct omap_hwmod omap44xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &omap44xx_uart_hwmod_class,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= omap44xx_uart3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart3_irqs),
+	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart4 */
+static struct omap_hwmod omap44xx_uart4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
+	{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
+	{
+		.pa_start	= 0x4806e000,
+		.pa_end		= 0x4806e0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
 static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
 	.master		= &omap44xx_l4_abe_hwmod,
 	.slave		= &omap44xx_wd_timer3_hwmod,
@@ -582,6 +778,39 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/* l4_per -> uart4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
+	&omap44xx_l4_per__uart4,
+};
+
+static struct omap_hwmod omap44xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart4_irqs),
+	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart4_sdma_reqs),
+	.main_clk	= "uart4_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* dmm class */
 	&omap44xx_dmm_hwmod,
@@ -605,6 +834,12 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* wd_timer class */
 	&omap44xx_wd_timer2_hwmod,
 	&omap44xx_wd_timer3_hwmod,
+
+	/* uart class */
+	&omap44xx_uart1_hwmod,
+	&omap44xx_uart2_hwmod,
+	&omap44xx_uart3_hwmod,
+	&omap44xx_uart4_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index d2b940c7215d..60baffa27cb3 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -388,6 +388,7 @@ void omap_sram_idle(void)
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
+		omap_uart_prepare_idle(3);
 		omap2_gpio_prepare_for_idle(per_next_state);
 		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
@@ -459,6 +460,7 @@ void omap_sram_idle(void)
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
 		omap_uart_resume_idle(2);
+		omap_uart_resume_idle(3);
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -676,6 +678,14 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
+	u32 omap3630_auto_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_AUTO_UART4_MASK : 0;
+	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_EN_UART4_MASK : 0;
+	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
+					OMAP3630_GRPSEL_UART4_MASK : 0;
+
+
 	/* XXX Reset all wkdeps. This should be done when initializing
 	 * powerdomains */
 	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
@@ -762,6 +772,7 @@ static void __init prcm_setup_regs(void)
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
+		omap3630_auto_uart4_mask |
 		OMAP3430_AUTO_GPIO6_MASK |
 		OMAP3430_AUTO_GPIO5_MASK |
 		OMAP3430_AUTO_GPIO4_MASK |
@@ -838,14 +849,16 @@ static void __init prcm_setup_regs(void)
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+	prm_write_mod_reg(omap3630_en_uart4_mask |
+			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
 			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
 			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
 			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
 			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+	prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+			  OMAP3430_GRPSEL_GPIO2_MASK |
 			  OMAP3430_GRPSEL_GPIO3_MASK |
 			  OMAP3430_GRPSEL_GPIO4_MASK |
 			  OMAP3430_GRPSEL_GPIO5_MASK |
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 995b7edbf18d..298a22a754e2 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -382,6 +382,9 @@
 #define OMAP3430_EN_MPU_SHIFT				1
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+
+#define OMAP3630_EN_UART4_MASK				(1 << 18)
+#define OMAP3630_EN_UART4_SHIFT				18
 #define OMAP3430_EN_GPIO6_MASK				(1 << 17)
 #define OMAP3430_EN_GPIO6_SHIFT				17
 #define OMAP3430_EN_GPIO5_MASK				(1 << 16)
@@ -422,6 +425,8 @@
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3630_ST_UART4_SHIFT				18
+#define OMAP3630_ST_UART4_MASK				(1 << 18)
 #define OMAP3430_ST_GPIO6_SHIFT				17
 #define OMAP3430_ST_GPIO6_MASK				(1 << 17)
 #define OMAP3430_ST_GPIO5_SHIFT				16
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 7fd6023edf96..9e63cb743a97 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -122,6 +122,7 @@
 #define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
 
 /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3630_GRPSEL_UART4_MASK			(1 << 18)
 #define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
 #define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
 #define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 566e991ede81..0bcc9df0c034 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -19,19 +19,30 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/pm_runtime.h>
+
+#ifdef CONFIG_SERIAL_OMAP
+#include <plat/omap-serial.h>
+#endif
 
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/clock.h>
 #include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 
 #include "prm.h"
 #include "pm.h"
+#include "cm.h"
 #include "prm-regbits-34xx.h"
 
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
@@ -48,6 +59,8 @@
  */
 #define DEFAULT_TIMEOUT 0
 
+#define MAX_UART_HWMOD_NAME_LEN		16
+
 struct omap_uart_state {
 	int num;
 	int can_sleep;
@@ -58,14 +71,21 @@ struct omap_uart_state {
 	void __iomem *wk_en;
 	u32 wk_mask;
 	u32 padconf;
+	u32 dma_enabled;
 
 	struct clk *ick;
 	struct clk *fck;
 	int clocked;
 
-	struct plat_serial8250_port *p;
+	int irq;
+	int regshift;
+	int irqflags;
+	void __iomem *membase;
+	resource_size_t mapbase;
+
 	struct list_head node;
-	struct platform_device pdev;
+	struct omap_hwmod *oh;
+	struct platform_device *pdev;
 
 	u32 errata;
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@@ -83,75 +103,47 @@ struct omap_uart_state {
 };
 
 static LIST_HEAD(uart_list);
+static u8 num_uarts;
 
-static struct plat_serial8250_port serial_platform_data0[] = {
-	{
-		.irq		= 72,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+/*
+ * Since these idle/enable hooks are used in the idle path itself
+ * which has interrupts disabled, use the non-locking versions of
+ * the hwmod enable/disable functions.
+ */
+static int uart_idle_hwmod(struct omap_device *od)
+{
+	_omap_hwmod_idle(od->hwmods[0]);
 
-static struct plat_serial8250_port serial_platform_data1[] = {
-	{
-		.irq		= 73,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+	return 0;
+}
 
-static struct plat_serial8250_port serial_platform_data2[] = {
-	{
-		.irq		= 74,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
-};
+static int uart_enable_hwmod(struct omap_device *od)
+{
+	_omap_hwmod_enable(od->hwmods[0]);
+
+	return 0;
+}
 
-static struct plat_serial8250_port serial_platform_data3[] = {
+static struct omap_device_pm_latency omap_uart_latency[] = {
 	{
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-		.flags		= 0
-	}
+		.deactivate_func = uart_idle_hwmod,
+		.activate_func	 = uart_enable_hwmod,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
 };
 
-void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
-{
-	serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
-	serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
-	serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
-	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-
 static inline unsigned int __serial_read_reg(struct uart_port *up,
-					   int offset)
+					     int offset)
 {
 	offset <<= up->regshift;
 	return (unsigned int)__raw_readb(up->membase + offset);
 }
 
-static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
 					   int offset)
 {
-	offset <<= up->regshift;
-	return (unsigned int)__raw_readb(up->membase + offset);
+	offset <<= uart->regshift;
+	return (unsigned int)__raw_readb(uart->membase + offset);
 }
 
 static inline void __serial_write_reg(struct uart_port *up, int offset,
@@ -161,11 +153,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset,
 	__raw_writeb(value, up->membase + offset);
 }
 
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
 				    int value)
 {
-	offset <<= p->regshift;
-	__raw_writeb(value, p->membase + offset);
+	offset <<= uart->regshift;
+	__raw_writeb(value, uart->membase + offset);
 }
 
 /*
@@ -173,14 +165,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
  * properly. Note that the TX watermark initialization may not be needed
  * once the 8250.c watermark handling code is merged.
  */
+
 static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
-	struct plat_serial8250_port *p = uart->p;
-
-	serial_write_reg(p, UART_OMAP_MDR1, 0x07);
-	serial_write_reg(p, UART_OMAP_SCR, 0x08);
-	serial_write_reg(p, UART_OMAP_MDR1, 0x00);
-	serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
+	serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(uart, UART_OMAP_SCR, 0x08);
+	serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
 }
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -197,24 +187,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
 		u8 fcr_val)
 {
-	struct plat_serial8250_port *p = uart->p;
 	u8 timeout = 255;
 
-	serial_write_reg(p, UART_OMAP_MDR1, mdr1_val);
+	serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
 	udelay(2);
-	serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
+	serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
 			UART_FCR_CLEAR_RCVR);
 	/*
 	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
 	 * TX_FIFO_E bit is 1.
 	 */
-	while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) &
+	while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
 				(UART_LSR_THRE | UART_LSR_DR))) {
 		timeout--;
 		if (!timeout) {
 			/* Should *never* happen. we warn and carry on */
-			dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n",
-				serial_read_reg(p, UART_LSR));
+			dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
+			serial_read_reg(uart, UART_LSR));
 			break;
 		}
 		udelay(1);
@@ -224,23 +213,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
-	struct plat_serial8250_port *p = uart->p;
 
 	if (!enable_off_mode)
 		return;
 
-	lcr = serial_read_reg(p, UART_LCR);
-	serial_write_reg(p, UART_LCR, 0xBF);
-	uart->dll = serial_read_reg(p, UART_DLL);
-	uart->dlh = serial_read_reg(p, UART_DLM);
-	serial_write_reg(p, UART_LCR, lcr);
-	uart->ier = serial_read_reg(p, UART_IER);
-	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
-	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
-	uart->wer = serial_read_reg(p, UART_OMAP_WER);
-	serial_write_reg(p, UART_LCR, 0x80);
-	uart->mcr = serial_read_reg(p, UART_MCR);
-	serial_write_reg(p, UART_LCR, lcr);
+	lcr = serial_read_reg(uart, UART_LCR);
+	serial_write_reg(uart, UART_LCR, 0xBF);
+	uart->dll = serial_read_reg(uart, UART_DLL);
+	uart->dlh = serial_read_reg(uart, UART_DLM);
+	serial_write_reg(uart, UART_LCR, lcr);
+	uart->ier = serial_read_reg(uart, UART_IER);
+	uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
+	uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
+	uart->wer = serial_read_reg(uart, UART_OMAP_WER);
+	serial_write_reg(uart, UART_LCR, 0x80);
+	uart->mcr = serial_read_reg(uart, UART_MCR);
+	serial_write_reg(uart, UART_LCR, lcr);
 
 	uart->context_valid = 1;
 }
@@ -248,7 +236,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
 static void omap_uart_restore_context(struct omap_uart_state *uart)
 {
 	u16 efr = 0;
-	struct plat_serial8250_port *p = uart->p;
 
 	if (!enable_off_mode)
 		return;
@@ -261,29 +248,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
 		omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
 	else
-		serial_write_reg(p, UART_OMAP_MDR1, 0x7);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	efr = serial_read_reg(p, UART_EFR);
-	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
-	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
-	serial_write_reg(p, UART_IER, 0x0);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	serial_write_reg(p, UART_DLL, uart->dll);
-	serial_write_reg(p, UART_DLM, uart->dlh);
-	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
-	serial_write_reg(p, UART_IER, uart->ier);
-	serial_write_reg(p, UART_LCR, 0x80);
-	serial_write_reg(p, UART_MCR, uart->mcr);
-	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
-	serial_write_reg(p, UART_EFR, efr);
-	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
-	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
-	serial_write_reg(p, UART_OMAP_WER, uart->wer);
-	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+		serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	efr = serial_read_reg(uart, UART_EFR);
+	serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
+	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(uart, UART_IER, 0x0);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_DLL, uart->dll);
+	serial_write_reg(uart, UART_DLM, uart->dlh);
+	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
+	serial_write_reg(uart, UART_IER, uart->ier);
+	serial_write_reg(uart, UART_LCR, 0x80);
+	serial_write_reg(uart, UART_MCR, uart->mcr);
+	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_EFR, efr);
+	serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
+	serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
+	serial_write_reg(uart, UART_OMAP_WER, uart->wer);
+	serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
 		omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
 	else
-		serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+		/* UART 16x mode */
+		serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -295,8 +283,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
 	if (uart->clocked)
 		return;
 
-	clk_enable(uart->ick);
-	clk_enable(uart->fck);
+	omap_device_enable(uart->pdev);
 	uart->clocked = 1;
 	omap_uart_restore_context(uart);
 }
@@ -310,8 +297,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 
 	omap_uart_save_context(uart);
 	uart->clocked = 0;
-	clk_disable(uart->ick);
-	clk_disable(uart->fck);
+	omap_device_idle(uart->pdev);
 }
 
 static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@@ -349,18 +335,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
 }
 
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
-					  int enable)
+					       int enable)
 {
-	struct plat_serial8250_port *p = uart->p;
-	u16 sysc;
+	u8 idlemode;
 
-	sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
-	if (enable)
-		sysc |= 0x2 << 3;
-	else
-		sysc |= 0x1 << 3;
+	if (enable) {
+		/**
+		 * Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
+		 * in Smartidle Mode When Configured for DMA Operations.
+		 */
+		if (uart->dma_enabled)
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
+	} else {
+		idlemode = HWMOD_IDLEMODE_NO;
+	}
 
-	serial_write_reg(p, UART_OMAP_SYSC, sysc);
+	omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
 }
 
 static void omap_uart_block_sleep(struct omap_uart_state *uart)
@@ -377,7 +369,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
-	if (device_may_wakeup(&uart->pdev.dev))
+	if (device_may_wakeup(&uart->pdev->dev))
 		omap_uart_enable_wakeup(uart);
 	else
 		omap_uart_disable_wakeup(uart);
@@ -472,6 +464,7 @@ int omap_uart_can_sleep(void)
  * UART will not idle or sleep for its timeout period.
  *
  **/
+/* static int first_interrupt; */
 static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 {
 	struct omap_uart_state *uart = dev_id;
@@ -483,7 +476,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
@@ -495,7 +487,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
-		u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+		u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
 		u32 wk_mask = 0;
 		u32 padconf = 0;
 
@@ -514,6 +506,10 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 			wk_mask = OMAP3430_ST_UART3_MASK;
 			padconf = 0x19e;
 			break;
+		case 3:
+			wk_mask = OMAP3630_ST_UART4_MASK;
+			padconf = 0x0d2;
+			break;
 		}
 		uart->wk_mask = wk_mask;
 		uart->padconf = padconf;
@@ -546,9 +542,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	p->irqflags |= IRQF_SHARED;
-	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
-			  "serial idle", (void *)uart);
+	uart->irqflags |= IRQF_SHARED;
+	ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
+				   IRQF_SHARED, "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
@@ -558,11 +554,17 @@ void omap_uart_enable_irqs(int enable)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (enable)
-			ret = request_irq(uart->p->irq, omap_uart_interrupt,
-				IRQF_SHARED, "serial idle", (void *)uart);
-		else
-			free_irq(uart->p->irq, (void *)uart);
+		if (enable) {
+			pm_runtime_put_sync(&uart->pdev->dev);
+			ret = request_threaded_irq(uart->irq, NULL,
+						   omap_uart_interrupt,
+						   IRQF_SHARED,
+						   "serial idle",
+						   (void *)uart);
+		} else {
+			pm_runtime_get_noresume(&uart->pdev->dev);
+			free_irq(uart->irq, (void *)uart);
+		}
 	}
 }
 
@@ -570,10 +572,9 @@ static ssize_t sleep_timeout_show(struct device *dev,
 				  struct device_attribute *attr,
 				  char *buf)
 {
-	struct platform_device *pdev = container_of(dev,
-					struct platform_device, dev);
-	struct omap_uart_state *uart = container_of(pdev,
-					struct omap_uart_state, pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *odev = to_omap_device(pdev);
+	struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
 
 	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
@@ -582,10 +583,9 @@ static ssize_t sleep_timeout_store(struct device *dev,
 				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct platform_device *pdev = container_of(dev,
-					struct platform_device, dev);
-	struct omap_uart_state *uart = container_of(pdev,
-					struct omap_uart_state, pdev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *odev = to_omap_device(pdev);
+	struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
@@ -608,48 +608,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
 #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+static void omap_uart_block_sleep(struct omap_uart_state *uart) {}
 #define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct omap_uart_state omap_uart[] = {
-	{
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM,
-			.dev			= {
-				.platform_data	= serial_platform_data0,
-			},
-		},
-	}, {
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM1,
-			.dev			= {
-				.platform_data	= serial_platform_data1,
-			},
-		},
-	}, {
-		.pdev = {
-			.name			= "serial8250",
-			.id			= PLAT8250_DEV_PLATFORM2,
-			.dev			= {
-				.platform_data	= serial_platform_data2,
-			},
-		},
-	},
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	{
-		.pdev = {
-			.name			= "serial8250",
-			.id			= 3,
-			.dev			= {
-				.platform_data	= serial_platform_data3,
-			},
-		},
-	},
-#endif
-};
-
+#ifndef CONFIG_SERIAL_OMAP
 /*
  * Override the default 8250 read handler: mem_serial_in()
  * Empty RX fifo read causes an abort on omap3630 and omap4
@@ -682,71 +645,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 	}
 	__serial_write_reg(up, offset, value);
 }
+#endif
+
 void __init omap_serial_early_init(void)
 {
-	int i, nr_ports;
-	char name[16];
+	int i = 0;
 
-	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
-		nr_ports = 3;
-	else
-		nr_ports = ARRAY_SIZE(omap_uart);
+	do {
+		char oh_name[MAX_UART_HWMOD_NAME_LEN];
+		struct omap_hwmod *oh;
+		struct omap_uart_state *uart;
 
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on
-	 * if not needed.
-	 */
+		snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
+			 "uart%d", i + 1);
+		oh = omap_hwmod_lookup(oh_name);
+		if (!oh)
+			break;
 
-	for (i = 0; i < nr_ports; i++) {
-		struct omap_uart_state *uart = &omap_uart[i];
-		struct platform_device *pdev = &uart->pdev;
-		struct device *dev = &pdev->dev;
-		struct plat_serial8250_port *p = dev->platform_data;
+		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
+		if (WARN_ON(!uart))
+			return;
+
+		uart->oh = oh;
+		uart->num = i++;
+		list_add_tail(&uart->node, &uart_list);
+		num_uarts++;
 
-		/* Don't map zero-based physical address */
-		if (p->mapbase == 0) {
-			dev_warn(dev, "no physical address for uart#%d,"
-				 " so skipping early_init...\n", i);
-			continue;
-		}
 		/*
-		 * Module 4KB + L4 interconnect 4KB
-		 * Static mapping, never released
+		 * NOTE: omap_hwmod_init() has not yet been called,
+		 *       so no hwmod functions will work yet.
 		 */
-		p->membase = ioremap(p->mapbase, SZ_8K);
-		if (!p->membase) {
-			dev_err(dev, "ioremap failed for uart%i\n", i + 1);
-			continue;
-		}
-
-		sprintf(name, "uart%d_ick", i + 1);
-		uart->ick = clk_get(NULL, name);
-		if (IS_ERR(uart->ick)) {
-			dev_err(dev, "Could not get uart%d_ick\n", i + 1);
-			uart->ick = NULL;
-		}
-
-		sprintf(name, "uart%d_fck", i+1);
-		uart->fck = clk_get(NULL, name);
-		if (IS_ERR(uart->fck)) {
-			dev_err(dev, "Could not get uart%d_fck\n", i + 1);
-			uart->fck = NULL;
-		}
-
-		/* FIXME: Remove this once the clkdev is ready */
-		if (!cpu_is_omap44xx()) {
-			if (!uart->ick || !uart->fck)
-				continue;
-		}
-
-		uart->num = i;
-		p->private_data = uart;
-		uart->p = p;
 
-		if (cpu_is_omap44xx())
-			p->irq += 32;
-	}
+		/*
+		 * During UART early init, device need to be probed
+		 * to determine SoC specific init before omap_device
+		 * is ready.  Therefore, don't allow idle here
+		 */
+		uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
+	} while (1);
 }
 
 /**
@@ -763,53 +699,135 @@ void __init omap_serial_early_init(void)
 void __init omap_serial_init_port(int port)
 {
 	struct omap_uart_state *uart;
-	struct platform_device *pdev;
-	struct device *dev;
-
-	BUG_ON(port < 0);
-	BUG_ON(port >= ARRAY_SIZE(omap_uart));
-
-	uart = &omap_uart[port];
-	pdev = &uart->pdev;
-	dev = &pdev->dev;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	void *pdata = NULL;
+	u32 pdata_size = 0;
+	char *name;
+#ifndef CONFIG_SERIAL_OMAP
+	struct plat_serial8250_port ports[2] = {
+		{},
+		{.flags = 0},
+	};
+	struct plat_serial8250_port *p = &ports[0];
+#else
+	struct omap_uart_port_info omap_up;
+#endif
 
-	/* Don't proceed if there's no clocks available */
-	if (unlikely(!uart->ick || !uart->fck)) {
-		WARN(1, "%s: can't init uart%d, no clocks available\n",
-		     kobject_name(&dev->kobj), port);
+	if (WARN_ON(port < 0))
+		return;
+	if (WARN_ON(port >= num_uarts))
 		return;
-	}
-
-	omap_uart_enable_clocks(uart);
-
-	omap_uart_reset(uart);
-	omap_uart_idle_init(uart);
 
-	list_add_tail(&uart->node, &uart_list);
+	list_for_each_entry(uart, &uart_list, node)
+		if (port == uart->num)
+			break;
 
-	if (WARN_ON(platform_device_register(pdev)))
-		return;
+	oh = uart->oh;
+	uart->dma_enabled = 0;
+#ifndef CONFIG_SERIAL_OMAP
+	name = "serial8250";
 
-	if ((cpu_is_omap34xx() && uart->padconf) ||
-	    (uart->wk_en && uart->wk_mask)) {
-		device_init_wakeup(dev, true);
-		DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
-	}
+	/*
+	 * !! 8250 driver does not use standard IORESOURCE* It
+	 * has it's own custom pdata that can be taken from
+	 * the hwmod resource data.  But, this needs to be
+	 * done after the build.
+	 *
+	 * ?? does it have to be done before the register ??
+	 * YES, because platform_device_data_add() copies
+	 * pdata, it does not use a pointer.
+	 */
+	p->flags = UPF_BOOT_AUTOCONF;
+	p->iotype = UPIO_MEM;
+	p->regshift = 2;
+	p->uartclk = OMAP24XX_BASE_BAUD * 16;
+	p->irq = oh->mpu_irqs[0].irq;
+	p->mapbase = oh->slaves[0]->addr->pa_start;
+	p->membase = omap_hwmod_get_mpu_rt_va(oh);
+	p->irqflags = IRQF_SHARED;
+	p->private_data = uart;
 
 	/*
 	 * omap44xx: Never read empty UART fifo
 	 * omap3xxx: Never read empty UART fifo on UARTs
 	 * with IP rev >=0x52
 	 */
+	uart->regshift = p->regshift;
+	uart->membase = p->membase;
 	if (cpu_is_omap44xx())
 		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
-	else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+	else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
 			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
 		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
 
 	if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
-		uart->p->serial_in = serial_in_override;
-		uart->p->serial_out = serial_out_override;
+		p->serial_in = serial_in_override;
+		p->serial_out = serial_out_override;
+	}
+
+	pdata = &ports[0];
+	pdata_size = 2 * sizeof(struct plat_serial8250_port);
+#else
+
+	name = DRIVER_NAME;
+
+	omap_up.dma_enabled = uart->dma_enabled;
+	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
+	omap_up.mapbase = oh->slaves[0]->addr->pa_start;
+	omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
+	omap_up.irqflags = IRQF_SHARED;
+	omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+
+	pdata = &omap_up;
+	pdata_size = sizeof(struct omap_uart_port_info);
+#endif
+
+	if (WARN_ON(!oh))
+		return;
+
+	od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+			       omap_uart_latency,
+			       ARRAY_SIZE(omap_uart_latency), false);
+	WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+	     name, oh->name);
+
+	uart->irq = oh->mpu_irqs[0].irq;
+	uart->regshift = 2;
+	uart->mapbase = oh->slaves[0]->addr->pa_start;
+	uart->membase = omap_hwmod_get_mpu_rt_va(oh);
+	uart->pdev = &od->pdev;
+
+	oh->dev_attr = uart;
+
+	/*
+	 * Because of early UART probing, UART did not get idled
+	 * on init.  Now that omap_device is ready, ensure full idle
+	 * before doing omap_device_enable().
+	 */
+	omap_hwmod_idle(uart->oh);
+
+	omap_device_enable(uart->pdev);
+	omap_uart_idle_init(uart);
+	omap_uart_reset(uart);
+	omap_hwmod_enable_wakeup(uart->oh);
+	omap_device_idle(uart->pdev);
+
+	/*
+	 * Need to block sleep long enough for interrupt driven
+	 * driver to start.  Console driver is in polling mode
+	 * so device needs to be kept enabled while polling driver
+	 * is in use.
+	 */
+	if (uart->timeout)
+		uart->timeout = (30 * HZ);
+	omap_uart_block_sleep(uart);
+	uart->timeout = DEFAULT_TIMEOUT;
+
+	if ((cpu_is_omap34xx() && uart->padconf) ||
+	    (uart->wk_en && uart->wk_mask)) {
+		device_init_wakeup(&od->pdev.dev, true);
+		DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
 	}
 
 	/* Enable the MDR1 errata for OMAP3 */
@@ -826,13 +844,8 @@ void __init omap_serial_init_port(int port)
  */
 void __init omap_serial_init(void)
 {
-	int i, nr_ports;
-
-	if (!(cpu_is_omap3630() || cpu_is_omap4430()))
-		nr_ports = 3;
-	else
-		nr_ports = ARRAY_SIZE(omap_uart);
+	struct omap_uart_state *uart;
 
-	for (i = 0; i < nr_ports; i++)
-		omap_serial_init_port(i);
+	list_for_each_entry(uart, &uart_list, node)
+		omap_serial_init_port(uart->num);
 }