Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
 "Business as usual -- the bulk of our changes are to devicetree files
  with new hardware support, new SoCs and platforms, and new board
  types.

  New SoCs/platforms:
   - Raspberry Pi Compute Module (CM1) and IO board
   - i.MX6SSL from NXP
   - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
     and PLC interfaces
   - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
     controllers, communication and PRU subsystem and lots of other
     interfaces (PCIe, USB3, etc).

  New boards and systems:
   - Several Atmel at91-based boards from Laird
   - Marvell Armada388-based Helios4 board from SolidRun
   - Samsung Aires-based phones (s5pv210)
   - Allwinner A64-based Pinebook laptop

  In addition to the above, there's the usual amount of new devices
  described on existing platforms, fixes and tweaks and new minor
  variants of boards/platforms"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
  arm64: dts: sdm845: Add tsens nodes
  arm64: dts: msm8996: thermal: Initialise via DT and add second controller
  arm64: dts: sprd: Add one suspend timer
  arm64: dts: sprd: Add SC27XX ADC device
  arm64: dts: sprd: Add SC27XX eFuse device
  arm64: dts: sprd: Add SC27XX vibrator device
  arm64: dts: sprd: Add SC27XX breathing light controller device
  arm64: dts: meson-axg: add spdif-dit codec
  arm64: dts: meson-axg: add lineout codec
  arm64: dts: meson-axg: add linein codec
  arm64: dts: meson-axg: add tdm interfaces
  arm64: dts: meson-axg: add tdmout formatters
  arm64: dts: meson-axg: add tdmin formatters
  arm64: dts: meson-axg: add spdifout
  arm64: dts: rockchip: add led support for Firefly-RK3399
  arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
  arm64: dts: rockchip: add power button support for Firefly-RK3399
  ARM: dts: aspeed: Add coprocessor interrupt controller
  arm64: dts: meson-axg: add audio arb reset controller
  arm64: dts: meson-axg: add usb power regulator
  ...

175 files changed, 6473 insertions, 2778 deletions

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index f34cd1b42d69..35f2e6e1be23 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -71,6 +71,13 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
+config ARCH_K3
+	bool "Texas Instruments Inc. K3 multicore SoC architecture"
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for Texas Instruments' K3 multicore SoC
+	  architecture.
+
 config ARCH_LAYERSCAPE
 	bool "ARMv8 based Freescale Layerscape SoC family"
 	select EDAC_SUPPORT
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 3543bc324553..4690364d584b 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -23,5 +23,6 @@ subdir-y += rockchip
 subdir-y += socionext
 subdir-y += sprd
 subdir-y += synaptics
+subdir-y += ti
 subdir-y += xilinx
 subdir-y += zte
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index c31f90a49481..9ffa7a038791 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,9 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
new file mode 100644
index 000000000000..eac4793c8502
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Amarula A64-Relic";
+	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	/*
+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
+	 */
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 0716b1441187..094cfed13df9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -296,6 +296,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index e2dce48fa29a..98dbff19f5cc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -195,6 +195,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3b3081b10ecb..3f531393eaee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -214,6 +214,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index bf42690a3361..1221764f5719 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -191,6 +191,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index a75825798a71..1b9b92e541d2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -229,6 +229,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 /* On Euler connector */
 &spdif {
 	status = "disabled";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
new file mode 100644
index 000000000000..897e60cbe38d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Pinebook";
+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		framebuffer-lcd {
+			panel-supply = <&reg_dc1sw>;
+			dvdd25-supply = <&reg_dldo2>;
+			dvdd12-supply = <&reg_fldo1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		lid_switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&ehci0 {
+	phys = <&usbphy 0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	phys = <&usbphy 0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* The ANX6345 eDP-bridge is on r_i2c */
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pins_a>;
+	status = "okay";
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-edp";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_ldo_io0>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index abe179de35d7..c21f2331add6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -134,6 +134,10 @@
 	regulator-name = "vcc-wifi";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 43418bd881d8..6723b8695e0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,6 +45,8 @@
 
 #include "sun50i-a64.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -52,6 +54,7 @@
 	non-removable;
 	disable-wp;
 	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
@@ -66,6 +69,18 @@
 	};
 };
 
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 #include "axp803.dtsi"
 
 &reg_aldo2 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index d9baab3dc96b..81f8e0098699 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -38,6 +38,7 @@
 			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
+			wakeup-source;
 		};
 	};
 
@@ -210,7 +211,7 @@
 &reg_dldo3 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-	regulator-name = "eDP12";
+	regulator-name = "vdd-edp";
 };
 
 &reg_dldo4 {
@@ -253,6 +254,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1b2ef28c42bd..d3daf90a8715 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -43,9 +43,12 @@
  */
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -57,17 +60,21 @@
 		#size-cells = <1>;
 		ranges;
 
-/*
- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
- * However there is no support for this clock on A64 yet, so we depend
- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
- */
 		simplefb_lcd: framebuffer-lcd {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "mixer0-lcd0";
 			clocks = <&ccu CLK_TCON0>,
-				 <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
+				 <&display_clocks CLK_MIXER0>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-hdmi";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
 			status = "disabled";
 		};
 	};
@@ -168,10 +175,46 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x100000>;
+				clocks = <&ccu CLK_DE>,
+					 <&ccu CLK_BUS_DE>;
+				clock-names = "mod",
+					      "bus";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
 		syscon: syscon@1c00000 {
-			compatible = "allwinner,sun50i-a64-system-controller",
-				"syscon";
+			compatible = "allwinner,sun50i-a64-system-control";
 			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x28000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x28000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x28000>;
+				};
+			};
 		};
 
 		dma: dma-controller@1c02000 {
@@ -364,6 +407,11 @@
 				bias-pull-up;
 			};
 
+			pwm_pin: pwm_pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
 			rmii_pins: rmii_pins {
 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
 				       "PD18", "PD19", "PD20", "PD22", "PD23";
@@ -608,8 +656,6 @@
 			clocks = <&ccu CLK_BUS_EMAC>;
 			clock-names = "stmmaceth";
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			mdio: mdio {
 				compatible = "snps,dwmac-mdio";
@@ -629,11 +675,25 @@
 			#interrupt-cells = <3>;
 		};
 
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
 		};
 
 		r_intc: interrupt-controller@1f00c00 {
@@ -655,6 +715,29 @@
 			#reset-cells = <1>;
 		};
 
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun50i-a64-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -666,6 +749,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			r_i2c_pins_a: i2c-a {
+				pins = "PL8", "PL9";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: pwm {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
 			r_rsb_pins: rsb {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 98862c7c7258..3e0d5a9c096d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -207,6 +207,18 @@
 	status = "okay";
 };
 
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index b6f2d6b2ecae..ceffc40810ee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -20,11 +20,157 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "pine-h64:green:heartbeat";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		link {
+			label = "pine-h64:white:link";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+		};
+
+		status {
+			label = "pine-h64:blue:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
 };
 
 &r_i2c {
 	status = "okay";
 
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+			};
+
+			reg_aldo3: aldo3 {
+				/* This regulator is connected with CLDO1 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* This regulator is connected with ALDO3 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-2";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
 	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c72da8cd9ef5..cfa5fffcf62b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -5,7 +5,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -124,12 +126,71 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC4", "PC5", "PC6",
+				       "PC7", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			uart0_ph_pins: uart0-ph {
 				pins = "PH0", "PH1";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h6-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -198,7 +259,7 @@
 			reg = <0x07022000 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -215,8 +276,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 8>;
-			resets = <&r_ccu 4>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_i2c_pins>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 67dac595dc72..d033da401c26 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -119,6 +119,12 @@
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
 			};
+
+			qspi_clk: qspi-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <200000000>;
+			};
 		};
 
 		gmac0: ethernet@ff800000 {
@@ -127,8 +133,8 @@
 			interrupts = <0 90 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC0_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -140,8 +146,8 @@
 			interrupts = <0 91 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC1_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -153,8 +159,8 @@
 			interrupts = <0 92 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC2_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -310,6 +316,7 @@
 			resets = <&rst SPIM0_RESET>;
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -322,6 +329,7 @@
 			resets = <&rst SPIM1_RESET>;
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -407,6 +415,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -418,6 +427,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -426,6 +436,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 117 4>;
 			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -434,6 +445,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 118 4>;
 			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -442,6 +454,7 @@
 			reg = <0xffd00400 0x100>;
 			interrupts = <0 125 4>;
 			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -450,6 +463,7 @@
 			reg = <0xffd00500 0x100>;
 			interrupts = <0 126 4>;
 			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -464,5 +478,20 @@
 				interrupts = <16 4>, <48 4>;
 			};
 		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index f9b1ef12db48..6edc4fa9fd42 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -147,3 +147,38 @@
 		reg = <0x68>;
 	};
 };
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x4000000>;
+			};
+
+			qspi_rootfs: partition@4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x4000000 0x4000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 34dd0e9b5cbb..a97c0e2d7bc6 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -17,6 +17,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index dff9b15eb3c0..d5c01427a5ca 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -6,21 +6,75 @@
 /dts-v1/;
 
 #include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
 	model = "Amlogic Meson AXG S400 Development Board";
 
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-next {
+			label = "Next";
+			linux,code = <KEY_NEXT>;
+			press-threshold-microvolt = <1116000>; /* 62% */
+		};
+
+		button-prev {
+			label = "Previous";
+			linux,code = <KEY_PREVIOUS>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-wifi {
+			label = "Wifi";
+			linux,code = <KEY_WLAN>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-voice {
+			label = "Voice";
+			linux,code = <KEY_VOICECOMMAND>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+
 	aliases {
 		serial0 = &uart_AO;
 		serial1 = &uart_A;
 	};
 
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
 	};
 
 	vddao_3v3: regulator-vddao_3v3 {
@@ -28,6 +82,8 @@
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
 	};
 
 	vddio_ao18: regulator-vddio_ao18 {
@@ -35,6 +91,8 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -42,6 +100,30 @@
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -62,6 +144,66 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
 	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
+
+	linein: audio-codec@0 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7241";
+		VDDA-supply = <&vcc_3v3>;
+		VDDP-supply = <&vcc_3v3>;
+		VDDD-supply = <&vcc_3v3>;
+		status = "okay";
+		sound-name-prefix = "Linein";
+	};
+
+	lineout: audio-codec@1 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7154";
+		VDD-supply = <&vcc_3v3>;
+		PVDD-supply = <&vcc_5v>;
+		status = "okay";
+		sound-name-prefix = "Lineout";
+	};
+
+	spdif_dit: audio-codec@2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
 };
 
 &ethmac {
@@ -106,12 +248,33 @@
 	status = "okay";
 	pinctrl-0 = <&i2c1_z_pins>;
 	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+	};
 };
 
 &i2c_AO {
 	status = "okay";
 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
 	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
 };
 
 &pwm_ab {
@@ -166,3 +329,8 @@
 		compatible = "brcm,bcm4329-fmac";
 	};
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 67d7115e4eff..c518130e5ce7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
 #include <dt-bindings/clock/axg-clkc.h>
 #include <dt-bindings/clock/axg-aoclkc.h>
 #include <dt-bindings/gpio/meson-axg-gpio.h>
@@ -91,6 +92,39 @@
 		method = "smc";
 	};
 
+	tdmif_a: audio-controller@0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller@1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller@2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -155,6 +189,157 @@
 			};
 		};
 
+		audio: bus@ff642000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff642000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+			clkc_audio: clock-controller@0 {
+				compatible = "amlogic,axg-audio-clkc";
+				reg = <0x0 0x0 0x0 0xb4>;
+				#clock-cells = <1>;
+
+				clocks = <&clkc CLKID_AUDIO>,
+					 <&clkc CLKID_MPLL0>,
+					 <&clkc CLKID_MPLL1>,
+					 <&clkc CLKID_MPLL2>,
+					 <&clkc CLKID_MPLL3>,
+					 <&clkc CLKID_HIFI_PLL>,
+					 <&clkc CLKID_FCLK_DIV3>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_GP0_PLL>;
+				clock-names = "pclk",
+					      "mst_in0",
+					      "mst_in1",
+					      "mst_in2",
+					      "mst_in3",
+					      "mst_in4",
+					      "mst_in5",
+					      "mst_in6",
+					      "mst_in7";
+
+				resets = <&reset RESET_AUDIO>;
+			};
+
+			arb: reset-controller@280 {
+				compatible = "amlogic,meson-axg-audio-arb";
+				reg = <0x0 0x280 0x0 0x4>;
+				#reset-cells = <1>;
+				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+			};
+
+			tdmin_a: audio-controller@300 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x300 0x0 0x40>;
+				sound-name-prefix = "TDMIN_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_b: audio-controller@340 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x340 0x0 0x40>;
+				sound-name-prefix = "TDMIN_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_c: audio-controller@380 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x380 0x0 0x40>;
+				sound-name-prefix = "TDMIN_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_lb: audio-controller@3c0 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x3c0 0x0 0x40>;
+				sound-name-prefix = "TDMIN_LB";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			spdifout: audio-controller@480 {
+				compatible = "amlogic,axg-spdifout";
+				reg = <0x0 0x480 0x0 0x50>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFOUT";
+				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+				clock-names = "pclk", "mclk";
+				status = "disabled";
+			};
+
+			tdmout_a: audio-controller@500 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x500 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_b: audio-controller@540 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x540 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_c: audio-controller@580 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x580 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+		};
+
 		cbus: bus@ffd00000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xffd00000 0x0 0x25000>;
@@ -477,6 +662,48 @@
 					};
 				};
 
+				pdm_dclk_a14_pins: pdm_dclk_a14 {
+					mux {
+						groups = "pdm_dclk_a14";
+						function = "pdm";
+					};
+				};
+
+				pdm_dclk_a19_pins: pdm_dclk_a19 {
+					mux {
+						groups = "pdm_dclk_a19";
+						function = "pdm";
+					};
+				};
+
+				pdm_din0_pins: pdm_din0 {
+					mux {
+						groups = "pdm_din0";
+						function = "pdm";
+					};
+				};
+
+				pdm_din1_pins: pdm_din1 {
+					mux {
+						groups = "pdm_din1";
+						function = "pdm";
+					};
+				};
+
+				pdm_din2_pins: pdm_din2 {
+					mux {
+						groups = "pdm_din2";
+						function = "pdm";
+					};
+				};
+
+				pdm_din3_pins: pdm_din3 {
+					mux {
+						groups = "pdm_din3";
+						function = "pdm";
+					};
+				};
+
 				pwm_a_a_pins: pwm_a_a {
 					mux {
 						groups = "pwm_a_a";
@@ -561,6 +788,76 @@
 					};
 				};
 
+				spdif_in_z_pins: spdif_in_z {
+					mux {
+						groups = "spdif_in_z";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a1_pins: spdif_in_a1 {
+					mux {
+						groups = "spdif_in_a1";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a7_pins: spdif_in_a7 {
+					mux {
+						groups = "spdif_in_a7";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a19_pins: spdif_in_a19 {
+					mux {
+						groups = "spdif_in_a19";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a20_pins: spdif_in_a20 {
+					mux {
+						groups = "spdif_in_a20";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_out_z_pins: spdif_out_z {
+					mux {
+						groups = "spdif_out_z";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a1_pins: spdif_out_a1 {
+					mux {
+						groups = "spdif_out_a1";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a11_pins: spdif_out_a11 {
+					mux {
+						groups = "spdif_out_a11";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a19_pins: spdif_out_a19 {
+					mux {
+						groups = "spdif_out_a19";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a20_pins: spdif_out_a20 {
+					mux {
+						groups = "spdif_out_a20";
+						function = "spdif_out";
+					};
+				};
+
 				spi0_pins: spi0 {
 					mux {
 						groups = "spi0_miso",
@@ -1194,6 +1491,20 @@
 				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-axg-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x38>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					<&clkc_AO CLKID_AO_SAR_ADC>,
+					<&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					<&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 88e712ea757a..765247bc4f24 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -35,6 +35,13 @@
 		regulator-always-on;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
@@ -140,6 +147,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -160,11 +172,6 @@
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 7d5709c37e95..cbe99bd4e06d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -106,6 +106,42 @@
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
+
+	/* CVBS is available on CON1 pin 36, disabled by default */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -137,6 +173,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
new file mode 100644
index 000000000000..70433e023fda
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S805X) P241 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index a9f9bb90a877..15014faa2ab2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -41,13 +41,6 @@
 		};
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -108,7 +101,9 @@
 	};
 };
 
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 80a231476b80..92c425d0259c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -19,3 +19,10 @@
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;
 };
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
new file mode 100644
index 000000000000..6509c4950950
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905W) P281 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
new file mode 100644
index 000000000000..789c819c99c4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Oranth Tanix TX3 Mini";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 0868da476e41..313f88f8759e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -209,10 +209,34 @@
 	#cooling-cells = <2>;
 };
 
+&cpu1 {
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	#cooling-cells = <2>;
+};
+
 &cpu4 {
 	#cooling-cells = <2>;
 };
 
+&cpu5 {
+	#cooling-cells = <2>;
+};
+
+&cpu6 {
+	#cooling-cells = <2>;
+};
+
+&cpu7 {
+	#cooling-cells = <2>;
+};
+
 &ethmac {
 	pinctrl-0 = <&eth_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index 101417298a1d..73d656e4aade 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -40,13 +40,6 @@
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
 };
 
 /* Q200 has exclusive choice between internal or external PHY */
@@ -79,7 +72,9 @@
 	};
 };
 
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index 8d132b17514a..d02b80d77378 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -19,3 +19,10 @@
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;
 };
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
index c4d06cffcb11..20c7d0aa6cb7 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/Makefile
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 8862ec907fd8..bc299c3d9068 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -30,20 +30,9 @@
  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include "stingray.dtsi"
+#include "stingray-board-base.dtsi"
 
 / {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart0;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
 	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
 		compatible = "regulator-gpio";
 		regulator-name = "sdio0_vddo_ctrl_reg";
@@ -67,11 +56,6 @@
 	};
 };
 
-&memory { /* Default DRAM banks */
-	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
-	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
-};
-
 &sata0 {
 	status = "okay";
 };
@@ -136,18 +120,6 @@
 	status = "okay";
 };
 
-&mdio_mux_iproc {
-	mdio@10 {
-		gphy0: eth-phy@10 {
-			reg = <0x10>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
 &pwm {
 	status = "okay";
 };
@@ -175,8 +147,6 @@
 };
 
 &enet {
-	phy-mode = "rgmii-id";
-	phy-handle = <&gphy0>;
 	status = "okay";
 };
 
@@ -197,13 +167,10 @@
 
 &sdio0 {
 	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
-	non-removable;
-	full-pwr-cycle;
 	status = "okay";
 };
 
 &sdio1 {
 	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
-	full-pwr-cycle;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
new file mode 100644
index 000000000000..a41facd7d79b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+/dts-v1/;
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958802a802x", "brcm,stingray";
+	model = "Stingray PS225xx (BCM958802A802x)";
+};
+
+&enet {
+	status = "disabled";
+};
+
+&sdio0 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
new file mode 100644
index 000000000000..82a24711d0d8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *  Copyright(c) 2016-2018 Broadcom
+ */
+
+#include "stingray.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdio0 {
+	non-removable;
+	full-pwr-cycle;
+};
+
+&sdio1 {
+	full-pwr-cycle;
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d4524b5ed..10a106aca229 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
 			reg = <0x0001d104 0x32>,
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll0", "clk_125", "clk_scr",
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
 					     "clk_250", "clk_pcie_axi",
 					     "clk_paxc_axi_x2",
 					     "clk_paxc_axi";
 		};
 
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
 		genpll3: genpll3@1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
 			clock-output-names = "genpll4", "clk_ccn",
-					     "clk_tpiu_pll", "noc_clk",
-					     "pll_chclk_fs4",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
 					     "clk_bridge_fscpu";
 		};
 
@@ -86,8 +98,8 @@
 			reg = <0x0001d248 0x32>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll5", "fs4_hf_clk",
-					     "crypto_ae_clk", "raid_ae_clk";
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
 		};
 
 		lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@
 			reg = <0x0001d138 0x3c>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "lcpll1", "clk_wanpn",
+			clock-output-names = "lcpll1", "clk_wan",
 					     "clk_usb_ref",
-					     "timesync_evt_clk";
+					     "clk_crmu_ts";
 		};
 
 		hsls_clk: hsls_clk {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
new file mode 100644
index 000000000000..33a472ab17e8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+pcie8: pcie@60400000 {
+	compatible = "brcm,iproc-pcie-paxc-v2";
+	reg = <0 0x60400000 0 0x1000>;
+	linux,pci-domain = <8>;
+
+	bus-range = <0x0 0x1>;
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+	device_type = "pci";
+	ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>;
+
+	dma-coherent;
+
+	msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */
+		  <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */
+		  <0x101 &gic_its 0x2080 0x1>, /* PF1 */
+		  <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */
+		  <0x102 &gic_its 0x2100 0x1>, /* PF2 */
+		  <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */
+		  <0x103 &gic_its 0x2180 0x1>, /* PF3 */
+		  <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */
+		  <0x104 &gic_its 0x2200 0x1>, /* PF4 */
+		  <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */
+		  <0x105 &gic_its 0x2280 0x1>, /* PF5 */
+		  <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */
+		  <0x106 &gic_its 0x2300 0x1>, /* PF6 */
+		  <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */
+		  <0x107 &gic_its 0x2380 0x1>, /* PF7 */
+		  <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */
+
+	phys = <&pcie_phy 8>;
+	phy-names = "pcie-phy";
+};
+
+pcie-ss {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x40000000 0x800>;
+
+	pcie_phy: phy@0 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0x0 0x200>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index a70e8ddbd66f..e283480bfc7e 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -146,6 +146,11 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
 	scr {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -258,6 +263,18 @@
 
 		#include "stingray-clock.dtsi"
 
+		otp: otp@1c400 {
+			compatible = "brcm,ocotp-v2";
+			reg = <0x0001c400 0x68>;
+			brcm,ocotp-size = <2048>;
+			status = "okay";
+		};
+
+		cdru: syscon@1d000 {
+			compatible = "brcm,sr-cdru", "syscon";
+			reg = <0x0001d000 0x400>;
+		};
+
 		gpio_crmu: gpio@24800 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x00024800 0x4c>;
@@ -269,6 +286,7 @@
 
 	#include "stingray-fs4.dtsi"
 	#include "stingray-sata.dtsi"
+	#include "stingray-pcie.dtsi"
 
 	hsls {
 		compatible = "simple-bus";
@@ -420,6 +438,7 @@
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
 			clock-names = "wdogclk", "apb_pclk";
+			timeout-sec = <60>;
 		};
 
 		gpio_hsls: gpio@d0000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
deleted file mode 100644
index f0803575fd9f..000000000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <23>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_mux_addr = <6>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
deleted file mode 100644
index cccae662228a..000000000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 038c99792ccb..2131f12364cb 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -630,7 +630,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU0>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -641,7 +641,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU0>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -652,7 +652,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -663,7 +663,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -674,7 +674,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -1171,7 +1171,7 @@
 			power-domains = <&pd_gscl>;
 		};
 
-		sysmmu_scaler_0: sysmmu@0x15040000 {
+		sysmmu_scaler_0: sysmmu@15040000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x15040000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -1182,7 +1182,7 @@
 			power-domains = <&pd_mscl>;
 		};
 
-		sysmmu_scaler_1: sysmmu@0x15050000 {
+		sysmmu_scaler_1: sysmmu@15050000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x15050000 0x1000>;
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
deleted file mode 100644
index 48494710b7b2..000000000000
--- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos7 TMU sensor configuration
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <9>;
-samsung,tmu_reference_voltage = <17>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <15>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 93a84338938a..75ad724c487e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -589,7 +589,7 @@
 			clocks = <&clock_peris PCLK_TMU>,
 				 <&clock_peris SCLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos7-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		thermal-zones {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 7286b1ebfd7a..f90c040fd5e8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A Freedom Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index cdc4aee75227..2fb1cb1f7d8f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A QDS Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index c1a119effa61..5edb1e137a52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A RDB Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4c5df0..4c558a2133e2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1012A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 169e171407a6..6082ae022136 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree nodes for ls1043
  *
  * Copyright 2015-2016 Freescale Semiconductor Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &soc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 6341281485cf..c7b8d2c009cd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 3dc0c8e9663d..7b01ba8d3b7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22bda5e..b9f5d2ff4ff2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/thermal/thermal.h>
@@ -80,8 +43,8 @@
 			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
-			#cooling-cells = <2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -91,6 +54,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -100,6 +64,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -109,6 +74,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
index f5017dba0f17..d6caaea57d90 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree nodes for ls1046
  *
  * Copyright 2015-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &soc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 434383bade0e..e69306e6b0b1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Shaohui Xie <Shaohui.Xie@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 5dc2782e2a58..440e111651d5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa9b333..65ce1c3cb568 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -87,6 +50,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -96,6 +60,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -105,6 +70,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 30128051d0c0..6f48d21b97c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NXP LS1088A QDS Board.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 4f17601b919c..8e925df6c01c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NXP LS1088A RDB Board.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556bcfddf..a07f612ab56b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for NXP Layerscape-1088A family SoC.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -76,6 +40,7 @@
 			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -84,6 +49,7 @@
 			reg = <0x2>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -92,6 +58,7 @@
 			reg = <0x3>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@100 {
@@ -109,6 +76,7 @@
 			reg = <0x101>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -117,6 +85,7 @@
 			reg = <0x102>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -125,6 +94,7 @@
 			reg = <0x103>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		CPU_PH20: cpu-ph20 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 3c99608b9b45..f6c3ee78ace0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a QDS Board.
  *
@@ -7,43 +8,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index a4e7de9f70d8..44894356059c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a RDB Board.
  *
@@ -7,43 +8,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index fbbb73e571c0..5517305039a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a software Simulator model
  *
@@ -5,43 +6,6 @@
  *
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 8d739301e7b8..f9c1d30cf4a7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
@@ -6,43 +7,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "fsl-ls208xa.dtsi"
@@ -65,6 +29,7 @@
 		clocks = <&clockgen 1 0>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu2: cpu@100 {
@@ -84,6 +49,7 @@
 		clocks = <&clockgen 1 1>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu4: cpu@200 {
@@ -103,6 +69,7 @@
 		clocks = <&clockgen 1 2>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu6: cpu@300 {
@@ -122,6 +89,7 @@
 		clocks = <&clockgen 1 3>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cluster0_l2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index eaee5b1c3a44..7c17b1bd4529 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2088A QDS Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index c411442cac62..f6b4d75a258b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2088A RDB Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 0884e1a77901..7c882da3f6b0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2088A family SoC.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "fsl-ls208xa.dtsi"
@@ -65,6 +29,7 @@
 		clocks = <&clockgen 1 0>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu2: cpu@100 {
@@ -84,6 +49,7 @@
 		clocks = <&clockgen 1 1>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu4: cpu@200 {
@@ -103,6 +69,7 @@
 		clocks = <&clockgen 1 2>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu6: cpu@300 {
@@ -122,6 +89,7 @@
 		clocks = <&clockgen 1 3>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cluster0_l2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 1de618801c73..c11f52e7ae9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080A QDS Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 061647bd97b8..6fd7f63085c9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080A RDB Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4dfc3e9..8cb78dd99672 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
index ae15307f6e8b..ff1aba5fae7f 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ BMan Portals device tree
  *
  * Copyright 2011-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &bportals {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index ecdffe731b98..dbd2fc3ba790 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 10g port #0 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index a7f6af56b6a5..6fc5d2560057 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 10g port #1 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index d600786719fb..4e02276fcf99 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #0 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 3c0b76d43043..0312fa43fa77 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #1 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index 89633afca26a..af2df07971dd 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #2 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 87c2b705b1f9..4ac98dc8b227 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #3 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index 8f4d74b96b67..bd932d8b0160 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #4 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index d534f770f729..7de1c5203f3e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #5 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 4664c33e0763..263b972a6d1e 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman0: fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
index 6a93a4a9be0e..e3bec08b110d 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ QMan Portals device tree
  *
  * Copyright 2011-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &qportals {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 68c5a6c819ae..c98bcbc8dfba 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -574,21 +574,35 @@
 };
 
 &dwmmc1 {
+	bus-width = <0x4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	cd-inverted;
+	cd-gpios = <&gpio25 3 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
 	vmmc-supply = <&ldo16>;
 	vqmmc-supply = <&ldo9>;
 	status = "okay";
 };
 
 &dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
 	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
 	/* WL_EN */
 	vmmc-supply = <&wlan_en>;
-	ti,non-removable;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	#address-cells = <0x1>;
-	#size-cells = <0x0>;
 	status = "ok";
 
 	wlcore: wlcore@2 {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 851190a719ea..f432b0a88c65 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -61,7 +61,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -75,7 +75,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -87,7 +87,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -99,7 +99,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -111,7 +111,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -125,7 +125,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -137,7 +137,7 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -149,7 +149,7 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -158,31 +158,40 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP: cpu-sleep {
+			CPU_SLEEP_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <40>;
-				exit-latency-us = <70>;
-				min-residency-us = <3000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <650>;
+				min-residency-us = <1500>;
 			};
-
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x1010000>;
 				entry-latency-us = <500>;
-				exit-latency-us = <5000>;
-				min-residency-us = <20000>;
+				exit-latency-us = <1600>;
+				min-residency-us = <3500>;
+			};
+
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <550>;
+				min-residency-us = <1500>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x1010000>;
-				entry-latency-us = <1000>;
-				exit-latency-us = <5000>;
-				min-residency-us = <20000>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2900>;
+				min-residency-us = <3500>;
 			};
 		};
 
@@ -1020,16 +1029,10 @@
 
 		/* SD */
 		dwmmc1: dwmmc1@ff37f000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cd-inverted;
 			compatible = "hisilicon,hi3660-dw-mshc";
-			bus-width = <0x4>;
-			disable-wp;
-			cap-sd-highspeed;
-			supports-highspeed;
-			card-detect-delay = <200>;
 			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
 				<&crg_ctrl HI3660_HCLK_GATE_SD>;
@@ -1037,29 +1040,17 @@
 			clock-frequency = <3200000>;
 			resets = <&crg_rst 0x94 18>;
 			reset-names = "reset";
-			cd-gpios = <&gpio25 3 0>;
 			hisilicon,peripheral-syscon = <&sctrl>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd_pmx_func
-				     &sd_clk_cfg_func
-				     &sd_cfg_func>;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
+			card-detect-delay = <200>;
 			status = "disabled";
-
-			slot@0 {
-				reg = <0x0>;
-				bus-width = <4>;
-				disable-wp;
-			};
 		};
 
 		/* SDIO */
 		dwmmc2: dwmmc2@ff3ff000 {
 			compatible = "hisilicon,hi3660-dw-mshc";
 			reg = <0x0 0xff3ff000 0x0 0x1000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
 				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
@@ -1067,12 +1058,6 @@
 			resets = <&crg_rst 0x94 20>;
 			reset-names = "reset";
 			card-detect-delay = <200>;
-			supports-highspeed;
-			keep-power-in-suspend;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdio_pmx_func
-				     &sdio_clk_cfg_func
-				     &sdio_cfg_func>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 7f12624f6c8e..f4964bee6a1a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -323,7 +323,6 @@
 			bus-width = <0x4>;
 			non-removable;
 			cap-power-off-card;
-			keep-power-in-suspend;
 			vmmc-supply = <&reg_vdd_3v3>;
 			mmc-pwrseq = <&wl1835_pwrseq>;
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 586b281cd531..247024df714f 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -88,8 +88,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <311>;
 		};
 
@@ -101,6 +101,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu2: cpu@2 {
@@ -111,6 +113,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu3: cpu@3 {
@@ -121,6 +125,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu4: cpu@100 {
@@ -131,6 +137,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu5: cpu@101 {
@@ -141,6 +149,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu6: cpu@102 {
@@ -151,6 +161,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu7: cpu@103 {
@@ -161,6 +173,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		CLUSTER0_L2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 3353252d78a0..d9531e242eb4 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -22,6 +22,21 @@
 		serial1 = &uart1;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -98,6 +113,12 @@
 				status = "disabled";
 			};
 
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x200>;
@@ -287,7 +308,7 @@
 			};
 
 			crypto: crypto@90000 {
-				compatible = "inside-secure,safexcel-eip97";
+				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index a66958ff4de6..56fa44860909 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -91,7 +91,7 @@
 	};
 
 	sfp_eth3: sfp-eth3 {
-		/* CON3,4 - CPS lane 5 */
+		/* CON13,14 - CPS lane 5 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfp_1g_i2c>;
 		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 1c6ff8197a88..840c8454d03e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -398,7 +398,7 @@
 		};
 
 		CP110_LABEL(crypto): crypto@800000 {
-			compatible = "inside-secure,safexcel-eip197";
+			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
 			interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
 				<ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index ac17f60f998c..5b7fd6ad96e4 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
new file mode 100644
index 000000000000..742938a1a548
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for MediaTek X20 Development Board
+ *
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "mt6797.dtsi"
+
+/ {
+	model = "Mediatek X20 Development Board";
+	compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index b7837642c33a..a747b7bf132d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -18,7 +18,7 @@
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
 	chosen {
-		bootargs = "console=ttyS0,115200n1 swiotlb=512";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
 	};
 
 	cpus {
@@ -34,7 +34,7 @@
 	};
 
 	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		poll-interval = <100>;
 
 		factory {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9213c966c224..de2c47bdbe64 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -89,6 +89,7 @@
 				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			enable-method = "psci";
 			clock-frequency = <1300000000>;
 		};
@@ -286,9 +287,16 @@
 
 	pio: pinctrl@10211000 {
 		compatible = "mediatek,mt7622-pinctrl";
-		reg = <0 0x10211000 0 0x1000>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10005000 0 0x1000>;
+		reg-names = "base", "eint";
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 103>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
 	};
 
 	watchdog: watchdog@10212000 {
@@ -331,7 +339,7 @@
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_UART_SEL>,
-			 <&pericfg CLK_PERI_UART1_PD>;
+			 <&pericfg CLK_PERI_UART0_PD>;
 		clock-names = "baud", "bus";
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 94597e33c806..abd2f15a544b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -168,6 +168,7 @@
 			reg = <0x001>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -193,6 +194,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 			clocks = <&infracfg CLK_INFRA_CA57SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index ecb034177fc2..57d3f00464ce 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -27,15 +27,33 @@
 	};
 
 	cbb {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
 
 		/* SDMMC1 (SD/MMC) */
 		sdhci@3400000 {
-/*
 			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
-*/
 		};
 
 		/* SDMMC4 (eMMC) */
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6322ef265c2f..a4dfcd19b9e8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -18,6 +18,45 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra194-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x2200000 0x10000>,
+			      <0x2210000 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		ethernet@2490000 {
+			compatible = "nvidia,tegra186-eqos",
+				     "snps,dwc-qos-ethernet-4.10";
+			reg = <0x02490000 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_AXI_CBB>,
+				 <&bpmp TEGRA194_CLK_EQOS_AXI>,
+				 <&bpmp TEGRA194_CLK_EQOS_RX>,
+				 <&bpmp TEGRA194_CLK_EQOS_TX>,
+				 <&bpmp TEGRA194_CLK_EQOS_PTP_REF>;
+			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+			resets = <&bpmp TEGRA194_RESET_EQOS>;
+			reset-names = "eqos";
+			status = "disabled";
+
+			snps,write-requests = <1>;
+			snps,read-requests = <3>;
+			snps,burst-map = <0x7>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <8>;
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;
@@ -329,6 +368,73 @@
 		};
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10001>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+
+		cpu@6 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu@7 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10301>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 9ff848792712..78ce3979ef09 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -338,7 +338,7 @@
 			led@6 {
 				label = "apq8016-sbc:blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bt";
+				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 4d5ef01f43a3..0ef90c6554a9 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -19,6 +19,33 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
 / {
 	aliases {
 		serial0 = &blsp2_uart1;
@@ -130,6 +157,218 @@
 			status = "okay";
 		};
 
+		pinctrl@1010000 {
+			gpio-line-names =
+				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+				"TP93", /* GPIO_9 */
+				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+				"NC", /* GPIO_12 */
+				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+				"TP99", /* GPIO_16 */
+				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+				"GPIO-D", /* GPIO_24, LSEC pin 26 */
+				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+				"BLSP6_I2C_SDA", /* GPIO_27 */
+				"BLSP6_I2C_SCL", /* GPIO_28 */
+				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+				"GPIO30", /* GPIO_30, S HSEC pin 4 */
+				"HDMI_CEC", /* GPIO_31 */
+				"HDMI_DDC_CLOCK", /* GPIO_32 */
+				"HDMI_DDC_DATA", /* GPIO_33 */
+				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+				"PCIE0_RST_N", /* GPIO_35 */
+				"PCIE0_CLKREQ_N", /* GPIO_36 */
+				"PCIE0_WAKE", /* GPIO_37 */
+				"SD_CARD_DET_N", /* GPIO_38 */
+				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+				"W_DISABLE_N", /* GPIO_40 */
+				"[BLSP9_UART_TX]", /* GPIO_41 */
+				"[BLSP9_UART_RX]", /* GPIO_42 */
+				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+				"[BLSP3_UART_TX]", /* GPIO_45 */
+				"[BLSP3_UART_RX]", /* GPIO_46 */
+				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+				"[CODEC_INT1_N]", /* GPIO_53 */
+				"[CODEC_INT2_N]", /* GPIO_54 */
+				"[BLSP7_I2C_SDA]", /* GPIO_55 */
+				"[BLSP7_I2C_SCL]", /* GPIO_56 */
+				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+				"GPIO-E", /* GPIO_62, LSEC pin 27 */
+				"TP87", /* GPIO_63 */
+				"[CODEC_RST_N]", /* GPIO_64 */
+				"[PCM1_CLK]", /* GPIO_65 */
+				"[PCM1_SYNC]", /* GPIO_66 */
+				"[PCM1_DIN]", /* GPIO_67 */
+				"[PCM1_DOUT]", /* GPIO_68 */
+				"AUDIO_REF_CLK", /* GPIO_69 */
+				"SLIMBUS_CLK", /* GPIO_70 */
+				"SLIMBUS_DATA0", /* GPIO_71 */
+				"SLIMBUS_DATA1", /* GPIO_72 */
+				"NC", /* GPIO_73 */
+				"NC", /* GPIO_74 */
+				"NC", /* GPIO_75 */
+				"NC", /* GPIO_76 */
+				"TP94", /* GPIO_77 */
+				"NC", /* GPIO_78 */
+				"TP95", /* GPIO_79 */
+				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+				"TP88", /* GPIO_81 */
+				"TP89", /* GPIO_82 */
+				"TP90", /* GPIO_83 */
+				"TP91", /* GPIO_84 */
+				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+				"NC", /* GPIO_92 */
+				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+				"NC", /* GPIO_97 */
+				"CAM1_STANDBY_N", /* GPIO_98 */
+				"NC", /* GPIO_99 */
+				"NC", /* GPIO_100 */
+				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+				"BOOT_CONFIG1", /* GPIO_102 */
+				"USB_HUB_RESET", /* GPIO_103 */
+				"CAM1_RST_N", /* GPIO_104 */
+				"NC", /* GPIO_105 */
+				"NC", /* GPIO_106 */
+				"NC", /* GPIO_107 */
+				"NC", /* GPIO_108 */
+				"NC", /* GPIO_109 */
+				"NC", /* GPIO_110 */
+				"NC", /* GPIO_111 */
+				"NC", /* GPIO_112 */
+				"PMI8994_BUA", /* GPIO_113 */
+				"PCIE2_RST_N", /* GPIO_114 */
+				"PCIE2_CLKREQ_N", /* GPIO_115 */
+				"PCIE2_WAKE", /* GPIO_116 */
+				"SSC_IRQ_0", /* GPIO_117 */
+				"SSC_IRQ_1", /* GPIO_118 */
+				"SSC_IRQ_2", /* GPIO_119 */
+				"NC", /* GPIO_120 */
+				"GPIO121", /* GPIO_121, S HSEC pin 2 */
+				"NC", /* GPIO_122 */
+				"SSC_IRQ_6", /* GPIO_123 */
+				"SSC_IRQ_7", /* GPIO_124 */
+				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+				"BOOT_CONFIG5", /* GPIO_126 */
+				"NC", /* GPIO_127 */
+				"NC", /* GPIO_128 */
+				"BOOT_CONFIG7", /* GPIO_129 */
+				"PCIE1_RST_N", /* GPIO_130 */
+				"PCIE1_CLKREQ_N", /* GPIO_131 */
+				"PCIE1_WAKE", /* GPIO_132 */
+				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+				"NC", /* GPIO_134 */
+				"NC", /* GPIO_135 */
+				"BOOT_CONFIG8", /* GPIO_136 */
+				"NC", /* GPIO_137 */
+				"NC", /* GPIO_138 */
+				"GPS_SSBI2", /* GPIO_139 */
+				"GPS_SSBI1", /* GPIO_140 */
+				"NC", /* GPIO_141 */
+				"NC", /* GPIO_142 */
+				"NC", /* GPIO_143 */
+				"BOOT_CONFIG6", /* GPIO_144 */
+				"NC", /* GPIO_145 */
+				"NC", /* GPIO_146 */
+				"NC", /* GPIO_147 */
+				"NC", /* GPIO_148 */
+				"NC"; /* GPIO_149 */
+		};
+
+		qcom,spmi@400f000 {
+			pmic@0 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"KEY_VOLP_N",
+						"NC",
+						"BL1_PWM",
+						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+						"BL1_EN",
+						"NC",
+						"WLAN_EN",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"DIVCLK1",
+						"DIVCLK2",
+						"DIVCLK3",
+						"DIVCLK4",
+						"BT_EN",
+						"PMIC_SLB",
+						"PMIC_BUA",
+						"USB_VBUS_DET";
+				};
+
+				mpps@a000 {
+					gpio-line-names =
+						"VDDPX_BIAS",
+						"WIFI_LED",
+						"NC",
+						"BT_LED",
+						"PM_MPP05",
+						"PM_MPP06",
+						"PM_MPP07",
+						"NC";
+				};
+			};
+
+			pmic@2 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"SPKR_AMP_EN1",
+						"SPKR_AMP_EN2",
+						"TP61",
+						"NC",
+						"USB2_VBUS_DET",
+						"NC",
+						"NC",
+						"NC",
+						"NC";
+				};
+			};
+		};
+
 		phy@34000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index c2625d15a8c0..7b32b8990d62 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -858,9 +858,9 @@
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface_clk",
-				      "bus_clk",
-				      "vsync_clk";
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
 
 			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -883,10 +883,10 @@
 					 <&gcc GCC_MDSS_AXI_CLK>,
 					 <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_VSYNC_CLK>;
-				clock-names = "iface_clk",
-					      "bus_clk",
-					      "core_clk",
-					      "vsync_clk";
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
 
 				iommus = <&apps_iommu 4>;
 
@@ -922,12 +922,12 @@
 					 <&gcc GCC_MDSS_BYTE0_CLK>,
 					 <&gcc GCC_MDSS_PCLK0_CLK>,
 					 <&gcc GCC_MDSS_ESC0_CLK>;
-				clock-names = "mdp_core_clk",
-					      "iface_clk",
-					      "bus_clk",
-					      "byte_clk",
-					      "pixel_clk",
-					      "core_clk";
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
 				phys = <&dsi_phy0>;
 				phy-names = "dsi-phy";
 
@@ -963,7 +963,7 @@
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>;
-				clock-names = "iface_clk";
+				clock-names = "iface";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c7f9ca25b53..cd3865e7a270 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -377,6 +377,22 @@
 			reg = <0x740000 0x20000>;
 		};
 
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@4ad000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4ad000 0x1000>, /* TM */
+			      <0x4ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tcsr: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
 			reg = <0x7a0000 0x18000>;
@@ -459,12 +475,6 @@
 			status = "disabled";
 		};
 
-		tsens0: thermal-sensor@4a8000 {
-			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a8000 0x2000>;
-			#thermal-sensor-cells = <1>;
-		};
-
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
new file mode 100644
index 000000000000..4d5aca3eeb69
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8005_lsid0: pmic@4 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_gpio: gpios@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>;
+		};
+
+	};
+
+	pm8005_lsid1: pmic@5 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
new file mode 100644
index 000000000000..92bed1e7d4bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8998_lsid0: pmic@0 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8998_gpio: gpios@c000 {
+			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>,
+				     <0 0xd6 0 IRQ_TYPE_NONE>,
+				     <0 0xd7 0 IRQ_TYPE_NONE>,
+				     <0 0xd8 0 IRQ_TYPE_NONE>,
+				     <0 0xd9 0 IRQ_TYPE_NONE>;
+		};
+
+	};
+
+	pm8998_lsid1: pmic@1 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 979ab49913f1..6d651f314193 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -12,4 +12,49 @@
 / {
 	model = "Qualcomm Technologies, Inc. SDM845 MTP";
 	compatible = "qcom,sdm845-mtp";
+
+	aliases {
+		serial0 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_uart9_default {
+	pinconf-tx {
+		pins = "gpio4";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio5";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb3c995..0c9a2aa6a1b5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,7 +5,10 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -13,6 +16,41 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
 	chosen { };
 
 	memory@80000000 {
@@ -152,6 +190,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
@@ -206,6 +249,457 @@
 			#power-domain-cells = <1>;
 		};
 
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x8c0000 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x880000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x880000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x884000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x884000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x888000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x888000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x88c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x88c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x890000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x890000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x894000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x894000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x898000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x898000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x89c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x89c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0xac0000 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa98000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa98000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa9c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa9c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x40000>;
@@ -219,6 +713,269 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default {
+				pinmux {
+					pins = "gpio0", "gpio1";
+					function = "qup0";
+				};
+			};
+
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio17", "gpio18";
+					function = "qup1";
+				};
+			};
+
+			qup_i2c2_default: qup-i2c2-default {
+				pinmux {
+					pins = "gpio27", "gpio28";
+					function = "qup2";
+				};
+			};
+
+			qup_i2c3_default: qup-i2c3-default {
+				pinmux {
+					pins = "gpio41", "gpio42";
+					function = "qup3";
+				};
+			};
+
+			qup_i2c4_default: qup-i2c4-default {
+				pinmux {
+					pins = "gpio89", "gpio90";
+					function = "qup4";
+				};
+			};
+
+			qup_i2c5_default: qup-i2c5-default {
+				pinmux {
+					pins = "gpio85", "gpio86";
+					function = "qup5";
+				};
+			};
+
+			qup_i2c6_default: qup-i2c6-default {
+				pinmux {
+					pins = "gpio45", "gpio46";
+					function = "qup6";
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				pinmux {
+					pins = "gpio93", "gpio94";
+					function = "qup7";
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				pinmux {
+					pins = "gpio65", "gpio66";
+					function = "qup8";
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup9";
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				pinmux {
+					pins = "gpio55", "gpio56";
+					function = "qup10";
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				pinmux {
+					pins = "gpio31", "gpio32";
+					function = "qup11";
+				};
+			};
+
+			qup_i2c12_default: qup-i2c12-default {
+				pinmux {
+					pins = "gpio49", "gpio50";
+					function = "qup12";
+				};
+			};
+
+			qup_i2c13_default: qup-i2c13-default {
+				pinmux {
+					pins = "gpio105", "gpio106";
+					function = "qup13";
+				};
+			};
+
+			qup_i2c14_default: qup-i2c14-default {
+				pinmux {
+					pins = "gpio33", "gpio34";
+					function = "qup14";
+				};
+			};
+
+			qup_i2c15_default: qup-i2c15-default {
+				pinmux {
+					pins = "gpio81", "gpio82";
+					function = "qup15";
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup0";
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				pinmux {
+					pins = "gpio17", "gpio18",
+					       "gpio19", "gpio20";
+					function = "qup1";
+				};
+			};
+
+			qup_spi2_default: qup-spi2-default {
+				pinmux {
+					pins = "gpio27", "gpio28",
+					       "gpio29", "gpio30";
+					function = "qup2";
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				pinmux {
+					pins = "gpio41", "gpio42",
+					       "gpio43", "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_spi4_default: qup-spi4-default {
+				pinmux {
+					pins = "gpio89", "gpio90",
+					       "gpio91", "gpio92";
+					function = "qup4";
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				pinmux {
+					pins = "gpio85", "gpio86",
+					       "gpio87", "gpio88";
+					function = "qup5";
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				pinmux {
+					pins = "gpio45", "gpio46",
+					       "gpio47", "gpio48";
+					function = "qup6";
+				};
+			};
+
+			qup_spi7_default: qup-spi7-default {
+				pinmux {
+					pins = "gpio93", "gpio94",
+					       "gpio95", "gpio96";
+					function = "qup7";
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				pinmux {
+					pins = "gpio65", "gpio66",
+					       "gpio67", "gpio68";
+					function = "qup8";
+				};
+			};
+
+			qup_spi9_default: qup-spi9-default {
+				pinmux {
+					pins = "gpio6", "gpio7",
+					       "gpio4", "gpio5";
+					function = "qup9";
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				pinmux {
+					pins = "gpio55", "gpio56",
+					       "gpio53", "gpio54";
+					function = "qup10";
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				pinmux {
+					pins = "gpio31", "gpio32",
+					       "gpio33", "gpio34";
+					function = "qup11";
+				};
+			};
+
+			qup_spi12_default: qup-spi12-default {
+				pinmux {
+					pins = "gpio49", "gpio50",
+					       "gpio51", "gpio52";
+					function = "qup12";
+				};
+			};
+
+			qup_spi13_default: qup-spi13-default {
+				pinmux {
+					pins = "gpio105", "gpio106",
+					       "gpio107", "gpio108";
+					function = "qup13";
+				};
+			};
+
+			qup_spi14_default: qup-spi14-default {
+				pinmux {
+					pins = "gpio33", "gpio34",
+					       "gpio31", "gpio32";
+					function = "qup14";
+				};
+			};
+
+			qup_spi15_default: qup-spi15-default {
+				pinmux {
+					pins = "gpio81", "gpio82",
+					       "gpio83", "gpio84";
+					function = "qup15";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default {
+				pinmux {
+					pins = "gpio4", "gpio5";
+					function = "qup9";
+				};
+			};
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -246,6 +1003,29 @@
 			#mbox-cells = <1>;
 		};
 
+		apps_rsc: rsc@179c0000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x179c0000 0x10000>,
+			      <0x179d0000 0x10000>,
+			      <0x179e0000 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm845-rpmh-clk";
+				#clock-cells = <1>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
index 009cb1cb0dde..2f24dfc45617 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-es1-h3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
index dd4f9b6a4254..598b98168559 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index 3f46345a4644..6b5fa91f1d5d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index e19dcd6cb767..7b2fbaec9aef 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 ES1.x SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795.dtsi"
@@ -80,7 +77,7 @@
 
 	vspd3: vsp@fea38000 {
 		compatible = "renesas,vsp2";
-		reg = <0 0xfea38000 0 0x8000>;
+		reg = <0 0xfea38000 0 0x5000>;
 		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 620>;
 		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
index 4403227c0f97..80791ed27539 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-h3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 0afe777973de..df50bf46406e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 0efbef5ea9b7..446822f5751c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index e231b5a7cbab..8ded64d0a4d5 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index d842940b2f43..fb9d08ad7659 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
@@ -291,7 +288,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
@@ -528,6 +525,15 @@
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
 		i2c3: i2c@e66d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -2530,7 +2536,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2541,7 +2547,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2552,7 +2558,7 @@
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
index de2390f009e7..2df50eb11f16 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7796-m3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index daee1f1a3f68..cbd8acbf537e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 90cca09b9a5e..052d72acc862 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car M3-W
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
index ddf35d4cd5e5..8860be65342e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 7c25be6b5af3..cbd35c00b4af 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7796 SoC
  *
- * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
  */
 
 #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
@@ -269,7 +266,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7796-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
@@ -2108,13 +2105,57 @@
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		imr-lx4@fe860000 {
@@ -2212,7 +2253,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2223,7 +2264,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2234,7 +2275,7 @@
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 486aecacb22a..0cd44461a0bd 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -138,9 +138,14 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@e6050000 {
@@ -451,6 +456,94 @@
 			status = "disabled";
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
 		hsusb: usb@e6590000 {
 			compatible = "renesas,usbhs-r8a7796",
 				     "renesas,rcar-gen3-usbhs";
@@ -611,6 +704,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77965_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77965",
 				     "renesas,etheravb-rcar-gen3";
@@ -732,7 +914,7 @@
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 207>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
@@ -749,7 +931,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 206>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
@@ -766,7 +948,7 @@
 			reg = <0 0xe6e88000 0 64>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 310>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -780,7 +962,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 204>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
@@ -796,7 +978,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 203>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
@@ -812,7 +994,7 @@
 			reg = <0 0xe6f30000 0 64>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 202>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
@@ -1176,6 +1358,9 @@
 				port@0 {
 					reg = <0>;
 				};
+				port@1 {
+					reg = <1>;
+				};
 			};
 		};
 
@@ -1340,13 +1525,57 @@
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		fcpf0: fcp@fe950000 {
@@ -1397,7 +1626,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -1416,7 +1645,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 21f9cf5c6e84..b6d53321576b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Eagle board
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 9fce031a596f..8eac8ca6550b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the V3M Starter Kit board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 98a2317a16c4..954168858fed 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77970 SoC
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
@@ -776,7 +773,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 0b93a7d76585..9f25c407dfd7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -59,6 +59,8 @@
 	phy0: ethernet-phy@0 {
 		rxc-skew-ps = <1500>;
 		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -80,6 +82,28 @@
 	clock-frequency = <32768>;
 };
 
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &mmc0 {
 	pinctrl-0 = <&mmc_pins>;
 	pinctrl-1 = <&mmc_pins_uhs>;
@@ -104,6 +128,11 @@
 		function = "canfd0";
 	};
 
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
 	mmc_pins: mmc {
 		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
 		function = "mmc";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index c9680994555d..9dac42f8f804 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &scif0;
+		ethernet0 = &gether;
 	};
 
 	chosen {
@@ -36,7 +37,29 @@
 	clock-frequency = <32768>;
 };
 
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 4c40f9f0ebc9..b8c9a56562f2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -16,6 +16,15 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -30,6 +39,36 @@
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <2>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <3>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller {
 			compatible = "cache";
 			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
@@ -79,6 +118,96 @@
 		#size-cells = <2>;
 		ranges;
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
 		pfc: pin-controller@e6060000 {
 			compatible = "renesas,pfc-r8a77980";
 			reg = <0 0xe6060000 0 0x50c>;
@@ -105,6 +234,118 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+			       <&dmac2 0x9b>, <&dmac2 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a77980",
 				     "renesas,rcar-gen3-hscif",
@@ -202,6 +443,69 @@
 			};
 		};
 
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: mmu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: mmu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77980",
 				     "renesas,etheravb-rcar-gen3";
@@ -387,6 +691,18 @@
 			dma-channels = <16>;
 		};
 
+		gether: ethernet@e7400000 {
+			compatible = "renesas,gether-r8a77980";
+			reg = <0 0xe7400000 0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		mmc0: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77980",
 				     "renesas,rcar-gen3-sdhi";
@@ -408,7 +724,7 @@
 			      <0x0 0xf1020000 0 0x20000>,
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
-			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(1) |
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(4) |
 				      IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
@@ -416,6 +732,83 @@
 			resets = <&cpg 408>;
 		};
 
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
@@ -424,13 +817,13 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 7a09d0524f9b..2bc3a4884b00 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -47,10 +47,18 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pfc {
 	avb_pins: avb {
 		mux {
@@ -58,8 +66,37 @@
 			function = "avb";
 		};
 	};
+
+	usb0_pins: usb {
+		groups = "usb0_b";
+		function = "usb0";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
 };
 
 &scif2 {
 	status = "okay";
 };
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index be4f519711a1..ae89260baad9 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/renesas-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
 
 / {
 	compatible = "renesas,r8a77990";
@@ -17,16 +18,24 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* 1 core only at this point */
 		a53_0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0>;
+			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc 5>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc 6>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller-0 {
 			compatible = "cache";
 			power-domains = <&sysc 21>;
@@ -44,8 +53,9 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&a53_0>;
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
 	psci {
@@ -60,6 +70,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77990",
 				     "renesas,rcar-gen3-gpio";
@@ -191,10 +211,91 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
@@ -248,6 +349,54 @@
 			status = "disabled";
 		};
 
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -258,7 +407,7 @@
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc 32>;
@@ -273,9 +422,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 9d73de8bc94d..a8e8f2669d4c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Draak board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -59,6 +56,27 @@
 		};
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -82,6 +100,12 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -142,6 +166,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
 &i2c0 {
@@ -154,6 +183,77 @@
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -167,6 +267,11 @@
 	pinctrl-names = "default";
 	status = "okay";
 
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
 	ports {
 		port@0 {
 			endpoint {
@@ -246,3 +351,23 @@
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 2506f46293e8..fe77bc43c447 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77995 SoC
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77995-cpg-mssr.h>
@@ -88,8 +85,7 @@
 
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6050000 0 0x50>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -104,8 +100,7 @@
 
 		gpio1: gpio@e6051000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6051000 0 0x50>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -120,8 +115,7 @@
 
 		gpio2: gpio@e6052000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -136,8 +130,7 @@
 
 		gpio3: gpio@e6053000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -152,8 +145,7 @@
 
 		gpio4: gpio@e6054000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -168,8 +160,7 @@
 
 		gpio5: gpio@e6055000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -184,8 +175,7 @@
 
 		gpio6: gpio@e6055400 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -224,6 +214,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -240,6 +242,41 @@
 			resets = <&cpg 407>;
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -408,6 +445,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -415,6 +453,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -422,6 +461,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -430,6 +470,7 @@
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -437,6 +478,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -444,6 +486,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -451,6 +494,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -458,6 +502,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -465,6 +510,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -472,6 +518,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -593,6 +640,40 @@
 			status = "disabled";
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial@e6e88000 {
 			compatible = "renesas,scif-r8a77995",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -610,6 +691,117 @@
 			status = "disabled";
 		};
 
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		vin4: video@e6ef4000 {
 			compatible = "renesas,vin-r8a77995";
 			reg = <0 0xe6ef4000 0 0x1000>;
@@ -699,7 +891,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -709,7 +901,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -785,6 +977,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 9256fbaaab7f..7d3d866a0063 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for common parts of Salvator-X board variants
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
@@ -36,7 +33,7 @@
 / {
 	aliases {
 		serial0 = &scif2;
-		serial1 = &scif1;
+		serial1 = &hscif1;
 		ethernet0 = &avb;
 	};
 
@@ -341,6 +338,15 @@
 	clock-frequency = <32768>;
 };
 
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	status = "okay";
+};
+
 &hsusb {
 	dr_mode = "otg";
 	status = "okay";
@@ -440,7 +446,7 @@
 			};
 		};
 
-		port@10 {
+		port@a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -450,7 +456,7 @@
 			};
 		};
 
-		port@11 {
+		port@b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
@@ -546,6 +552,11 @@
 		function = "du";
 	};
 
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_a";
 		function = "i2c2";
@@ -589,13 +600,13 @@
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -711,7 +722,8 @@
 	pinctrl-names = "default";
 
 	uart-has-rtscts;
-	status = "okay";
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
 };
 
 &scif2 {
@@ -838,7 +850,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
index 468868c8ed9f..ddee50e64632 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock5: clock-generator@6a {
 		compatible = "idt,5p49v5923";
 		reg = <0x6a>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
index bf4d200fb546..717d42758cbc 100644
--- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock6: clock-generator@6a {
 		compatible = "idt,5p49v6901";
 		reg = <0x6a>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index a4e715cbde87..8bf3091a899c 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Kingfisher (ULCB extension) board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0edb16e6b372..0ead552d7eae 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the R-Car Gen3 ULCB board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -330,13 +327,13 @@
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -447,7 +444,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 48a83f882947..b0092d95b574 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,7 +9,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 3d551e3e6c23..8302d86d35c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 28257724a56e..5272e887a434 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 PINE64
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b8e9da15e00c..3f5a2944300f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3328-cru.h>
@@ -89,6 +52,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -100,6 +64,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -111,6 +76,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -331,7 +297,7 @@
 		reg = <0x0 0xff120000 0x0 0x100>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		clock-names = "sclk_uart", "pclk_uart";
+		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 4>, <&dmac 5>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
index 8a5275f0539b..160f2c7e9559 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index a37220a9387c..4de089149c50 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 5e4d3a7015f5..6b9b1ac1994c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index d3f6c8e0d206..96147d93dd1d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 13a9e22f5d2d..fc1bf078a41f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index b3510d56517a..7452bedf1a7e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index ad91ced78649..9c24de1ba43c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3368-cru.h>
@@ -113,7 +76,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -122,6 +84,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l2: cpu@2 {
@@ -129,6 +92,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l3: cpu@3 {
@@ -136,6 +100,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b0: cpu@100 {
@@ -143,7 +108,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -152,6 +116,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b2: cpu@102 {
@@ -159,6 +124,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b3: cpu@103 {
@@ -166,6 +132,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 56533c344ef2..959ddc3c7df5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
new file mode 100644
index 000000000000..8978d924eb83
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "96boards RK3399 Ficus";
+	compatible = "vamrs,ficus", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 0>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_sys>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		status = "okay";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 15 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins =
+				<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins =
+				<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins =
+				<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <100000 100000000>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc_sd>;
+	card-detect-delay = <800>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 2a352763c848..38336ab57cc4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -1,46 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
@@ -109,6 +73,39 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	rt5640-sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "rockchip,rt5640-codec";
@@ -529,19 +526,16 @@
 &i2s0 {
 	rockchip,playback-channels = <8>;
 	rockchip,capture-channels = <8>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
 &i2s2 {
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
@@ -627,6 +621,16 @@
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
new file mode 100644
index 000000000000..1ee0dc0d9f10
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Bob Rev 4+ board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+
+/ {
+	model = "Google Bob";
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv101wxmn51", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		ports {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ap_i2c_tp {
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		wakeup-source;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&pinctrl {
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
new file mode 100644
index 000000000000..ff81dfda3b95
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Chromebook shared properties
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/ {
+	pp900_ap: pp900-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_ap";
+
+		/* EC turns on w/ pp900_ap_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* EC turns on w/ pp900_usb_en */
+	pp900_usb: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pcie_en */
+	pp900_pcie: pp900-ap {
+	};
+
+	pp3000: pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3000_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_centerlogic_pwm";
+
+		pwms = <&pwm3 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	/* Schematics call this PPVAR even though it's fixed */
+	ppvar_logic: ppvar-logic {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_logic";
+
+		/* EC turns on w/ ppvar_logic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_audio: pp1800-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_audio_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* gpio is shared with pp3300_wifi_bt */
+	pp1800_pcie: pp1800-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_pcie";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_pd_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
+		 * This has been approximated as 8ms total.
+		 */
+		regulator-enable-ramp-delay = <8000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* Always on; plain and simple */
+	pp3000_ap: pp3000_emmc: pp3000 {
+	};
+
+	pp1500_ap_io: pp1500-ap-io {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1500_ap_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1500_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	pp3300_disp: pp3300-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_disp_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <2000>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on w/ pp3300_usb_en_l */
+	pp3300_usb: pp3300 {
+	};
+
+	/* gpio is shared with pp1800_pcie and pinctrl is set there */
+	pp3300_wifi_bt: pp3300-wifi-bt {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wifi_bt";
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3300>;
+	};
+
+	/*
+	 * This is a bit of a hack. The WiFi module should be reset at least
+	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+	 * With some stretching of the imagination, we can call the 1.8V
+	 * regulator a supply.
+	 */
+	wlan_pd_n: wlan-pd-n {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
+
+		enable-active-high;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp1800_pcie>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
+				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
+				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
+				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
+				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
+				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
+		default-brightness-level = <51>;
+		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		power-supply = <&pp3300_disp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwm-delay-us = <10000>;
+	};
+};
+
+&ppvar_bigcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_litcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_gpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+ap_i2c_mic: &i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	headsetcodec: rt5514@57 {
+		compatible = "realtek,rt5514";
+		reg = <0x57>;
+		realtek,dmic-init-delay-ms = <20>;
+	};
+};
+
+ap_i2c_tp: &i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/*
+	 * Note strange pullup enable.  Apparently this avoids leakage but
+	 * still allows us to get nice 4.7K pullups for high speed i2c
+	 * transfers.  Basically we want the pullup on whenever the ap is
+	 * alive, so the "en" pin just gets set to output high.
+	 */
+	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+&cros_ec {
+	cros_ec_pwm: ec-pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+	};
+
+	usbc_extcon1: extcon@1 {
+		compatible = "google,extcon-usbc-cros-ec";
+		google,usb-port-id = <1>;
+
+		#extcon-cells = <0>;
+	};
+};
+
+&sound {
+	rockchip,codec = <&max98357a &headsetcodec
+			  &codec &wacky_spi_audio &cdn_dp>;
+};
+
+&spi2 {
+	wacky_spi_audio: spi2@0 {
+		compatible = "realtek,rt5514";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+		wakeup-source;
+	};
+};
+
+&pci_rootport {
+	mvl_wifi: wifi@0,0 {
+		compatible = "pci1b4b,2b42";
+		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
+		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake_l>;
+		wakeup-source;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pinctrl {
+	discrete-regulators {
+		pp1500_en: pp1500-en {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp1800_audio_en: pp1800-audio-en {
+			rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+
+		pp3000_en: pp3000-en {
+			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp3300_disp_en: pp3300-disp-en {
+			rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		wlan_module_pd_l: wlan-module-pd-l {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+	};
+};
+
+&wifi {
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 82179125bfb7..2cc7c47d6a85 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -1,49 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Gru-Kevin Rev 6+ board device tree source
  *
  * Copyright 2016-2017 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "rk3399-gru.dtsi"
+#include "rk3399-gru-chromebook.dtsi"
 #include <dt-bindings/input/linux-event-codes.h>
 
 /*
@@ -75,24 +38,6 @@
 		vin-supply = <&pp3300>;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&cros_ec_pwm 1>;
-		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
-				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
-				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
-				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
-				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
-				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
-		default-brightness-level = <51>;
-		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		power-supply = <&pp3300_disp>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en>;
-		pwm-delay-us = <10000>;
-	};
-
 	edp_panel: edp-panel {
 		compatible = "sharp,lq123p1jx31", "simple-panel";
 		backlight = <&backlight>;
@@ -124,6 +69,10 @@
 	};
 };
 
+&backlight {
+	pwms = <&cros_ec_pwm 1>;
+};
+
 &gpio_keys {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
@@ -280,23 +229,6 @@ ap_i2c_dig: &i2c2 {
 	};
 };
 
-&edp {
-	status = "okay";
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
 &ppvar_bigcpu_pwm {
 	regulator-min-microvolt = <798674>;
 	regulator-max-microvolt = <1302172>;
@@ -374,10 +306,4 @@ ap_i2c_dig: &i2c2 {
 			rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
-	wifi {
-		wlan_host_wake_l: wlan-host-wake-l {
-			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index f49bfab75dd0..ca07f6032200 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Gru (and derivatives) board device tree source
  *
  * Copyright 2016-2017 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
@@ -82,19 +45,6 @@
 		regulator-boot-on;
 	};
 
-	pp900_ap: pp900-ap {
-		compatible = "regulator-fixed";
-		regulator-name = "pp900_ap";
-
-		/* EC turns on w/ pp900_ap_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
 	pp1200_lpddr: pp1200-lpddr {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1200_lpddr";
@@ -121,23 +71,6 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
-	pp3000: pp3000 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3000_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
 	pp3300: pp3300 {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300";
@@ -191,8 +124,6 @@
 		ctrl-voltage-range = <800107 1302232>;
 
 		regulator-settling-time-up-us = <322>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
 	};
 
 	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
@@ -222,8 +153,6 @@
 		ctrl-voltage-range = <797743 1307837>;
 
 		regulator-settling-time-up-us = <384>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
 	};
 
 	ppvar_gpu_pwm: ppvar-gpu-pwm {
@@ -253,63 +182,12 @@
 		ctrl-voltage-range = <786384 1217747>;
 
 		regulator-settling-time-up-us = <390>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-
-	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_centerlogic_pwm";
-
-		pwms = <&pwm3 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-	};
-
-	ppvar_centerlogic: ppvar-centerlogic {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_centerlogic";
-
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-
-		ctrl-supply = <&ppvar_centerlogic_pwm>;
-		ctrl-voltage-range = <799434 1049925>;
-
-		regulator-settling-time-up-us = <378>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-
-	/* Schematics call this PPVAR even though it's fixed */
-	ppvar_logic: ppvar-logic {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_logic";
-
-		/* EC turns on w/ ppvar_logic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
 	};
 
 	/* EC turns on w/ pp900_ddrpll_en */
 	pp900_ddrpll: pp900-ap {
 	};
 
-	/* EC turns on w/ pp900_pcie_en */
-	pp900_pcie: pp900-ap {
-	};
-
 	/* EC turns on w/ pp900_pll_en */
 	pp900_pll: pp900-ap {
 	};
@@ -318,10 +196,6 @@
 	pp900_pmu: pp900-ap {
 	};
 
-	/* EC turns on w/ pp900_usb_en */
-	pp900_usb: pp900-ap {
-	};
-
 	/* EC turns on w/ pp1800_s0_en_l */
 	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
 	};
@@ -346,79 +220,6 @@
 	pp1800_usb: pp1800 {
 	};
 
-	pp1500_ap_io: pp1500-ap-io {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1500_ap_io";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1500_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	pp1800_audio: pp1800-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_audio_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/* gpio is shared with pp3300_wifi_bt */
-	pp1800_pcie: pp1800-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_pcie";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_pd_l>;
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		/*
-		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
-		 * This has been approximated as 8ms total.
-		 */
-		regulator-enable-ramp-delay = <8000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/*
-	 * This is a bit of a hack. The WiFi module should be reset at least
-	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
-	 * With some stretching of the imagination, we can call the 1.8V
-	 * regulator a supply.
-	 */
-	wlan_pd_n: wlan-pd-n {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_pd_n";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_reset_l>;
-
-		enable-active-high;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp1800_pcie>;
-	};
-
-	/* Always on; plain and simple */
-	pp3000_ap: pp3000_emmc: pp3000 {
-	};
-
 	pp3000_sd_slot: pp3000-sd-slot {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3000_sd_slot";
@@ -457,34 +258,6 @@
 	pp3300_trackpad: pp3300-trackpad {
 	};
 
-	/* EC turns on w/ pp3300_usb_en_l */
-	pp3300_usb: pp3300 {
-	};
-
-	pp3300_disp: pp3300-disp {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_disp";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3300_disp_en>;
-
-		enable-active-high;
-		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-
-		startup-delay-us = <2000>;
-		vin-supply = <&pp3300>;
-	};
-
-	/* gpio is shared with pp1800_pcie and pinctrl is set there */
-	pp3300_wifi_bt: pp3300-wifi-bt {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_wifi_bt";
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp3300>;
-	};
-
 	/* EC turns on w/ usb_a_en */
 	pp5000_usb_a_vbus: pp5000 {
 	};
@@ -494,7 +267,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l>;
 
-		wake-on-bt {
+		wake_on_bt: wake-on-bt {
 			label = "Wake-on-Bluetooth";
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -512,17 +285,14 @@
 		status = "okay";
 	};
 
-	sound {
+	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
 		rockchip,cpu = <&i2s0 &i2s2>;
-		rockchip,codec = <&max98357a &headsetcodec
-				  &codec &wacky_spi_audio &cdn_dp>;
 	};
 };
 
 &cdn_dp {
 	status = "okay";
-	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
 };
 
 /*
@@ -613,22 +383,6 @@
 	status = "okay";
 };
 
-ap_i2c_mic: &i2c1 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	headsetcodec: rt5514@57 {
-		compatible = "realtek,rt5514";
-		reg = <0x57>;
-		realtek,dmic-init-delay-ms = <20>;
-	};
-};
-
 ap_i2c_ts: &i2c3 {
 	status = "okay";
 
@@ -639,24 +393,6 @@ ap_i2c_ts: &i2c3 {
 	i2c-scl-rising-time-ns = <300>;
 };
 
-ap_i2c_tp: &i2c5 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	/*
-	 * Note strange pullup enable.  Apparently this avoids leakage but
-	 * still allows us to get nice 4.7K pullups for high speed i2c
-	 * transfers.  Basically we want the pullup on whenever the ap is
-	 * alive, so the "en" pin just gets set to output high.
-	 */
-	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
-};
-
 ap_i2c_audio: &i2c8 {
 	status = "okay";
 
@@ -730,17 +466,6 @@ ap_i2c_audio: &i2c8 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
-
-		mvl_wifi: wifi@0,0 {
-			compatible = "pci1b4b,2b42";
-			reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
-			       0x83010000 0x0 0x00100000 0x0 0x00100000>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_host_wake_l>;
-			wakeup-source;
-		};
 	};
 };
 
@@ -830,18 +555,6 @@ ap_i2c_audio: &i2c8 {
 
 &spi2 {
 	status = "okay";
-
-	wacky_spi_audio: spi2@0 {
-		compatible = "realtek,rt5514";
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mic_int>;
-		/* May run faster once verified. */
-		spi-max-frequency = <10000000>;
-		wakeup-source;
-	};
 };
 
 &spi5 {
@@ -863,24 +576,12 @@ ap_i2c_audio: &i2c8 {
 			#size-cells = <0>;
 		};
 
-		cros_ec_pwm: ec-pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-
 		usbc_extcon0: extcon@0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
 
 			#extcon-cells = <0>;
 		};
-
-		usbc_extcon1: extcon@1 {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <1>;
-
-			#extcon-cells = <0>;
-		};
 	};
 };
 
@@ -896,19 +597,10 @@ ap_i2c_audio: &i2c8 {
 	extcon = <&usbc_extcon0>;
 };
 
-&tcphy1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
 &u2phy0 {
 	status = "okay";
 };
 
-&u2phy1 {
-	status = "okay";
-};
-
 &u2phy0_host {
 	status = "okay";
 };
@@ -929,22 +621,10 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
 &usb_host0_ohci {
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usbdrd3_0 {
 	status = "okay";
 	extcon = <&usbc_extcon0>;
@@ -955,16 +635,6 @@ ap_i2c_audio: &i2c8 {
 	dr_mode = "host";
 };
 
-&usbdrd3_1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
 &vopb {
 	status = "okay";
 };
@@ -1023,26 +693,6 @@ ap_i2c_audio: &i2c8 {
 	};
 
 	discrete-regulators {
-		pp1500_en: pp1500-en {
-			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp1800_audio_en: pp1800-audio-en {
-			rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
-
-		pp3300_disp_en: pp3300-disp-en {
-			rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp3000_en: pp3000-en {
-			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
 		sd_io_pwr_en: sd-io-pwr-en {
 			rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
@@ -1057,11 +707,6 @@ ap_i2c_audio: &i2c8 {
 			rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
-
-		wlan_module_pd_l: wlan-module-pd-l {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
 	};
 
 	codec {
@@ -1168,11 +813,7 @@ ap_i2c_audio: &i2c8 {
 		};
 	};
 
-	wifi {
-		wifi_perst_l: wifi-perst-l {
-			rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
+	wifi: wifi {
 		wlan_module_reset_l: wlan-module-reset-l {
 			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index d8a120f945c8..69cc9b05baa5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index 81617bcf2522..d6f1095abb04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index e0afdd8b62bd..e0d64f862322 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 14a0f1998639..0130b9f98c9d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/pwm/pwm.h>
@@ -439,7 +402,6 @@
 	pinctrl-0 = <&i2s0_2ch_bus>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index ad7548d3b93d..fef2c0608999 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -186,7 +149,6 @@
 &i2s0 {
 	rockchip,playback-channels = <8>;
 	rockchip,capture-channels = <8>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
@@ -235,6 +197,5 @@
 &spdif {
 	i2c-scl-rising-time-ns = <450>;
 	i2c-scl-falling-time-ns = <15>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 941b627094d7..36b60791c156 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "dt-bindings/pwm/pwm.h"
@@ -227,6 +190,10 @@
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -458,7 +425,6 @@
 };
 
 &i2s2 {
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e0040b648f43..c88e603396f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3399-cru.h>
@@ -108,8 +71,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -119,6 +82,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -128,6 +92,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -137,6 +102,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -145,8 +111,8 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 		};
 
@@ -156,6 +122,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 		};
 	};
@@ -1446,10 +1413,6 @@
 			 <&cru SRST_P_UPHY0_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
-		rockchip,typec-conn-dir = <0xe580 0 16>;
-		rockchip,usb3tousb2-en = <0xe580 3 19>;
-		rockchip,external-psm = <0xe588 14 30>;
-		rockchip,pipe-status = <0xe5c0 0 0>;
 		status = "disabled";
 
 		tcphy0_dp: dp-port {
@@ -1475,10 +1438,6 @@
 			 <&cru SRST_P_UPHY1_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
-		rockchip,typec-conn-dir = <0xe58c 0 16>;
-		rockchip,usb3tousb2-en = <0xe58c 3 19>;
-		rockchip,external-psm = <0xe594 14 30>;
-		rockchip,pipe-status = <0xe5c0 16 16>;
 		status = "disabled";
 
 		tcphy1_dp: dp-port {
@@ -1516,6 +1475,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1531,6 +1491,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_8ch_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1545,6 +1506,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_2ch_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1557,6 +1519,7 @@
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1698,6 +1661,21 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "hdmi-sound";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
@@ -1711,6 +1689,7 @@
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -1936,19 +1915,49 @@
 			drive-strength = <12>;
 		};
 
+		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+			bias-disable;
+			drive-strength = <13>;
+		};
+
+		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+			bias-disable;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+			bias-disable;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
 		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
 			bias-pull-up;
 			drive-strength = <8>;
 		};
 
+		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+			bias-pull-up;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+			bias-pull-up;
+			drive-strength = <20>;
+		};
+
 		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
 			bias-pull-down;
 			drive-strength = <4>;
 		};
 
-		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
-			bias-pull-up;
-			drive-strength = <2>;
+		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+			bias-pull-down;
+			drive-strength = <8>;
 		};
 
 		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
@@ -1956,9 +1965,22 @@
 			drive-strength = <12>;
 		};
 
-		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
-			bias-disable;
-			drive-strength = <13>;
+		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+			bias-pull-down;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+			bias-pull-down;
+			drive-strength = <20>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
 		};
 
 		clock {
@@ -2481,45 +2503,60 @@
 		pwm0 {
 			pwm0_pin: pwm0-pin {
 				rockchip,pins =
-					<4 18 RK_FUNC_1 &pcfg_pull_none>;
+					<4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>;
 			};
 
 			vop0_pwm_pin: vop0-pwm-pin {
 				rockchip,pins =
-					<4 18 RK_FUNC_2 &pcfg_pull_none>;
+					<4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			vop1_pwm_pin: vop1-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
 			};
 		};
 
 		pwm1 {
 			pwm1_pin: pwm1-pin {
 				rockchip,pins =
-					<4 22 RK_FUNC_1 &pcfg_pull_none>;
+					<4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 
-			vop1_pwm_pin: vop1-pwm-pin {
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
 				rockchip,pins =
-					<4 18 RK_FUNC_3 &pcfg_pull_none>;
+					<4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>;
 			};
 		};
 
 		pwm2 {
 			pwm2_pin: pwm2-pin {
 				rockchip,pins =
-					<1 19 RK_FUNC_1 &pcfg_pull_none>;
+					<1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
 			};
 		};
 
 		pwm3a {
 			pwm3a_pin: pwm3a-pin {
 				rockchip,pins =
-					<0 6 RK_FUNC_1 &pcfg_pull_none>;
+					<0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
 
 		pwm3b {
 			pwm3b_pin: pwm3b-pin {
 				rockchip,pins =
-					<1 14 RK_FUNC_1 &pcfg_pull_none>;
+					<1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index ae3b5adf32df..7968d524351b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -60,6 +60,7 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 7919233c9ce2..1a5e7c24b901 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -60,6 +60,7 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 0298bd0d0e1a..caf112629caa 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -58,6 +58,7 @@
 			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@100 {
@@ -77,6 +78,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 98d3b4fdb9ad..82bd642d770b 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -17,6 +17,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		led-controller@200 {
+			compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc";
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				label = "red";
+				reg = <0x0>;
+			};
+
+			led@1 {
+				label = "green";
+				reg = <0x1>;
+			};
+
+			led@2 {
+				label = "blue";
+				reg = <0x2>;
+			};
+		};
+
 		rtc@280 {
 			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
 			reg = <0x280>;
@@ -35,6 +57,28 @@
 			#interrupt-cells = <2>;
 		};
 
+		efuse@380 {
+			compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+		};
+
+		pmic_adc: adc@480 {
+			compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
+			reg = <0x480>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			#io-channel-cells = <1>;
+			hwlocks = <&hwlock 4>;
+		};
+
+		vibrator@ec8 {
+			compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator";
+			reg = <0xec8>;
+		};
+
 		regulators {
 			compatible = "sprd,sc27xx-regulator";
 
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index e9db9108f3c0..eb6be5675f79 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -146,6 +146,12 @@
 				clocks = <&ext_32k>;
 			};
 
+			timer@40050020 {
+				compatible = "sprd,sc9860-suspend-timer";
+				reg = <0 0x40050020 0 0x20>;
+				clocks = <&ext_32k>;
+			};
+
 			hwlock: hwspinlock@40500000 {
 				compatible = "sprd,hwspinlock-r3p0";
 				reg = <0 0x40500000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
new file mode 100644
index 000000000000..63e619d0b5b8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Make file to build device tree binaries for boards based on
+# Texas Instruments Inc processors
+#
+# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+#
+
+dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
new file mode 100644
index 000000000000..2409344df4fa
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_main {
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x01800000 0x10000>,	/* GICD */
+		      <0x01880000 0x90000>;	/* GICR */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: gic-its@18200000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x01820000 0x10000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
new file mode 100644
index 000000000000..cede1fa0983c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Texas Instruments K3 AM654 SoC";
+	compatible = "ti,am654";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: interconnect@100000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
+			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
+			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
+			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
+			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+			 /* MCUSS Range */
+			 <0x28380000 0x00 0x28380000 0x03880000>,
+			 <0x40200000 0x00 0x40200000 0x00900100>,
+			 <0x42040000 0x00 0x42040000 0x03ac2400>,
+			 <0x45100000 0x00 0x45100000 0x00c24000>,
+			 <0x46000000 0x00 0x46000000 0x00200000>,
+			 <0x47000000 0x00 0x47000000 0x00068400>;
+
+		cbass_mcu: interconnect@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
+				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
+				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
+				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
+				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+
+			cbass_wakeup: interconnect@42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am65-main.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
new file mode 100644
index 000000000000..af6956fdc13f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+
+/ {
+	compatible =  "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 Base Board";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		secure_ddr: secure_ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
new file mode 100644
index 000000000000..2affa6f6617e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC family in Quad core configuration
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@100 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu3: cpu@101 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index c2a0c00272e2..60f5443f3ef4 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
new file mode 100644
index 000000000000..88aa06fa78a8
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
deleted file mode 100644
index 9f5eedbc2139..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
-	misc_clk: misc_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	i2c_clk: i2c_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <111111111>;
-	};
-
-	sata_clk: sata_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-};
-
-&can0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
-	clocks = <&misc_clk>;
-};
-
-&i2c0 {
-	clocks = <&i2c_clk>;
-};
-
-&i2c1 {
-	clocks = <&i2c_clk>;
-};
-
-&sata {
-	clocks = <&sata_clk>;
-};
-
-&sdhci0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
-	clocks= <&misc_clk>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
deleted file mode 100644
index 4b0684911626..000000000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
-	model = "ZynqMP EP108";
-
-	aliases {
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	phy0: phy@0 {
-		reg = <0>;
-		max-speed = <100>;
-	};
-};
-
-&gpio {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&sata {
-	status = "okay";
-	ceva,broken-gen2;
-	/* SATA Phy OOB timing settings */
-	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-};
-
-&sdhci1 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <1>;
-	spi0_flash0: spi0_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi0_flash0@0 {
-			label = "spi0_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <1>;
-	spi1_flash0: spi1_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi1_flash0@0 {
-			label = "spi1_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	maximum-speed = "high-speed";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-	maximum-speed = "high-speed";
-};
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 3e862a9faf26..eb5e8bddb610 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -44,8 +44,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw4 {
 			label = "sw4";
@@ -89,12 +87,6 @@
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-
-		bt_power {
-			label = "bt_power";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
 	};
 
 	wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +259,10 @@
 
 &uart0 {
 	status = "okay";
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 5b4ffe646a9b..25dd57485323 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 668f7f26716a..259f21b0c001 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 9a9dd6a0142b..a61b3cc6f4c9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";