diff options
author | David S. Miller <davem@davemloft.net> | 2014-11-01 14:53:27 -0400 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2014-11-01 14:53:27 -0400 |
commit | 55b42b5ca2dcf143465968697fe6c6503b05fca1 (patch) | |
tree | 91878cd53efc44ba67244d4d3897020828c87c01 /arch/arm | |
parent | 10738eeaf4ab3de092586cefcc082e7d43ca0044 (diff) | |
parent | ec1f1276022e4e3ca40871810217d513e39ff250 (diff) | |
download | linux-stable-55b42b5ca2dcf143465968697fe6c6503b05fca1.tar.gz linux-stable-55b42b5ca2dcf143465968697fe6c6503b05fca1.tar.bz2 linux-stable-55b42b5ca2dcf143465968697fe6c6503b05fca1.zip |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
drivers/net/phy/marvell.c
Simple overlapping changes in drivers/net/phy/marvell.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'arch/arm')
37 files changed, 280 insertions, 58 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7c80af906897..38c89cafa1ab 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -354,13 +354,15 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb + qcom-msm8960-cdp.dtb \ + qcom-msm8974-sony-xperia-honami.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-bqcurie2.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d68b3c4862bc..51416c7d0625 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -122,9 +122,10 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 5000000>; + atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; mck: masterck { diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 99b26df8dbc7..0865a2e33f97 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -675,7 +675,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <4>; - samsung,pin-pud = <4>; + samsung,pin-pud = <3>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 4f2df61c1cfc..aa7a7d727a7e 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -368,3 +368,7 @@ }; }; }; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9a233828539c..82cdb74484cc 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -838,6 +838,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index bfe056d9148c..8617a031cbc0 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -815,7 +815,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_0: dwc3 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; @@ -841,7 +841,7 @@ #size-cells = <1>; ranges; - dwc3 { + usbdrd_dwc3_1: dwc3 { compatible = "snps,dwc3"; reg = <0x12400000 0x10000>; interrupts = <0 73 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 1d31c8132558..7bb1c8dd42dd 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -826,6 +826,14 @@ status = "okay"; }; +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; + &usbdrd_phy0 { vbus-supply = <&usb300_vbus_reg>; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 09664fcf5afb..0e13b4b10a92 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -193,7 +193,6 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; - clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 9b0494a8ab45..bc82a12d4c2c 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -659,12 +659,17 @@ ethernet@gpmc { compatible = "smsc,lan91c94"; + + status = "disabled"; + interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; + power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */ + reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */ gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts new file mode 100644 index 000000000000..5d75666f7f6c --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -0,0 +1,59 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "CompuLab CM-QS600"; + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + + soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <32>; + }; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 95e64955fb8e..55b2910efd87 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -81,5 +81,13 @@ }; }; }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 244f857f0e6f..63b2146f563b 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -234,6 +234,39 @@ }; }; + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts new file mode 100644 index 000000000000..cccc21b7c8fd --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -0,0 +1,17 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1"; + compatible = "sony,xperia-honami", "qcom,msm8974"; + + memory@0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial@f991e000 { + status = "ok"; + }; +}; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 45fce2cf6fed..4472fd92685c 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -547,7 +547,7 @@ status = "disabled"; }; - gpio@ff708000 { + gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -555,7 +555,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio0: gpio-controller@0 { + porta: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -567,7 +567,7 @@ }; }; - gpio@ff709000 { + gpio1: gpio@ff709000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -575,7 +575,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio1: gpio-controller@0 { + portb: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; @@ -587,7 +587,7 @@ }; }; - gpio@ff70a000 { + gpio2: gpio@ff70a000 { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dw-apb-gpio"; @@ -595,7 +595,7 @@ clocks = <&per_base_clk>; status = "disabled"; - gpio2: gpio-controller@0 { + portc: gpio-controller@0 { compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 03e8268ae219..1907cc600452 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -29,7 +29,7 @@ }; }; - dwmmc0@ff704000 { + mmc0: dwmmc0@ff704000 { num-slots = <1>; broken-cd; bus-width = <4>; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 27d551c384d0..ccaf41742fc3 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -68,6 +75,11 @@ }; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index d7296a5f750c..258865da8f6a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,10 @@ rxc-skew-ps = <2000>; }; +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -69,7 +80,9 @@ }; &mmc0 { - cd-gpios = <&gpio1 18 0>; + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; }; &usb1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index d26f155f5fd9..16ea6f5f2ab8 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -37,6 +37,13 @@ */ ethernet0 = &gmac1; }; + + regulator_3_3v: vcc3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; &gmac1 { @@ -53,6 +60,11 @@ rxc-skew-ps = <2000>; }; +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + &usb1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 24036c440440..ce2ef5bec4f2 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -30,7 +30,6 @@ /* kHz uV */ 666667 1000000 333334 1000000 - 222223 1000000 >; }; @@ -65,7 +64,7 @@ interrupt-parent = <&intc>; ranges; - adc@f8007100 { + adc: adc@f8007100 { compatible = "xlnx,zynq-xadc-1.00.a"; reg = <0xf8007100 0x20>; interrupts = <0 7 4>; @@ -137,7 +136,7 @@ <0xF8F00100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; arm,data-latency = <3 2 2>; @@ -146,10 +145,10 @@ cache-level = <2>; }; - memory-controller@f8006000 { + mc: memory-controller@f8006000 { compatible = "xlnx,zynq-ddrc-a05"; reg = <0xf8006000 0x1000>; - } ; + }; uart0: serial@e0000000 { compatible = "xlnx,xuartps", "cdns,uart-r1p8"; @@ -195,7 +194,7 @@ gem0: ethernet@e000b000 { compatible = "cdns,gem"; - reg = <0xe000b000 0x4000>; + reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; @@ -206,7 +205,7 @@ gem1: ethernet@e000c000 { compatible = "cdns,gem"; - reg = <0xe000c000 0x4000>; + reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; @@ -315,5 +314,16 @@ reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; }; + + watchdog0: watchdog@f8005000 { + clocks = <&clkc 45>; + compatible = "xlnx,zynq-wdt-r1p2"; + device_type = "watchdog"; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset = <0>; + timeout-sec = <10>; + }; }; }; diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index fc7d1683bf67..72058b8a6f4d 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,6 +1,7 @@ CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y @@ -54,12 +55,14 @@ CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_GADGET=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y # CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ATMEL_MXT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y @@ -68,15 +71,18 @@ CONFIG_HW_RANDOM=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_S3C64XX=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y # CONFIG_HWMON is not set CONFIG_THERMAL=y @@ -88,6 +94,7 @@ CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8997=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y @@ -96,6 +103,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_MAX77802=y +CONFIG_REGULATOR_MAX77693=y CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -115,6 +124,7 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SNOW=y CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_EXYNOS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 491b7d5523bf..f1dc7fc668f3 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -261,6 +261,7 @@ CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_MESON_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y @@ -353,6 +354,7 @@ CONFIG_MMC_MVSDIO=y CONFIG_MMC_SUNXI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_ROCKCHIP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 69c7bed3c634..16e719c268dd 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -51,6 +51,7 @@ CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y +CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_CMA=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index c1a4ca4f6e6d..f7ac0379850f 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -75,6 +75,8 @@ CONFIG_POWER_RESET_SUN6I=y CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AXP20X=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 713e807621d2..2d2d6087b9b1 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/compiler.h> #include <linux/sched.h> #include <linux/mm.h> #include <linux/dma-mapping.h> @@ -39,10 +40,19 @@ * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c * (http://gcc.gnu.org/PR8896) and incorrect structure * initialisation in fs/jffs2/erase.c + * GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854 + * miscompiles find_get_entry(), and can result in EXT3 and EXT4 + * filesystem corruption (possibly other FS too). */ +#ifdef __GNUC__ #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) #error Your compiler is too buggy; it is known to miscompile kernels. -#error Known good compilers: 3.3 +#error Known good compilers: 3.3, 4.x +#endif +#if GCC_VERSION >= 40800 && GCC_VERSION < 40803 +#error Your compiler is too buggy; it is known to miscompile kernels +#error and result in filesystem corruption and oopses. +#endif #endif int main(void) diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5e772a21ab97..ef9119f7462e 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -949,8 +949,8 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, scno); - audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, - regs->ARM_r2, regs->ARM_r3); + audit_syscall_entry(scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, + regs->ARM_r3); return scno; } diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index b89e5f35db84..6b283eb3202e 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -161,7 +161,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd) static struct platform_device exynos_cpuidle = { .name = "exynos_cpuidle", +#ifdef CONFIG_ARM_EXYNOS_CPUIDLE .dev.platform_data = exynos_enter_aftr, +#endif .id = -1, }; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8c35ae4ff176..07a09570175d 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -20,7 +20,7 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/irqchip.h> -#include <linux/mailbox.h> +#include <linux/pl320-ipc.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 1412daf4a714..4e79da7c5e30 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -50,8 +50,8 @@ static const char *pcie_axi_sels[] = { "axi", "ahb", }; static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; -static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; +static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *vdo_axi_sels[] = { "axi", "ahb", }; static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", @@ -302,8 +302,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); - clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup); clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); @@ -354,8 +354,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); - clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); + clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); @@ -456,7 +456,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); - clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10); + clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c95346c94829..cec9d6c6442c 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -252,9 +252,6 @@ static void __init nokia_n900_legacy_init(void) platform_device_register(&omap3_rom_rng_device); } - - /* Only on some development boards */ - gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset"); } static void __init omap3_tao3530_legacy_init(void) diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index 572b8f719ffb..60c443dadb58 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -40,7 +40,7 @@ extern void __iomem *rst_manager_base_addr; extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; -extern unsigned long cpu1start_addr; +extern unsigned long socfpga_cpu1start_addr; #define SOCFPGA_SCU_VIRT_BASE 0xfffec000 diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index 95c115d8b5ee..f65ea0af4af3 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -9,21 +9,26 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/memory.h> .arch armv7-a ENTRY(secondary_trampoline) - movw r2, #:lower16:cpu1start_addr - movt r2, #:upper16:cpu1start_addr - - /* The socfpga VT cannot handle a 0xC0000000 page offset when loading - the cpu1start_addr, we bit clear it. Tested on HW and VT. */ - bic r2, r2, #0x40000000 - - ldr r0, [r2] - ldr r1, [r0] - bx r1 + /* CPU1 will always fetch from 0x0 when it is brought out of reset. + * Thus, we can just subtract the PAGE_OFFSET to get the physical + * address of &cpu1start_addr. This would not work for platforms + * where the physical memory does not start at 0x0. + */ + adr r0, 1f + ldmia r0, {r1, r2} + sub r2, r2, #PAGE_OFFSET + ldr r3, [r2] + ldr r4, [r3] + bx r4 + .align +1: .long . + .long socfpga_cpu1start_addr ENTRY(secondary_trampoline_end) ENTRY(socfpga_secondary_startup) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index 5356a72bc8ce..16ca97b039f9 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -33,11 +33,11 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) { int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; - if (cpu1start_addr) { + if (socfpga_cpu1start_addr) { memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); __raw_writel(virt_to_phys(socfpga_secondary_startup), - (sys_manager_base_addr + (cpu1start_addr & 0x000000ff))); + (sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff))); flush_cache_all(); smp_wmb(); diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index adbf38314ca8..383d61e138af 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -29,7 +29,7 @@ void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; -unsigned long cpu1start_addr; +unsigned long socfpga_cpu1start_addr; static struct map_desc scu_io_desc __initdata = { .virtual = SOCFPGA_SCU_VIRT_BASE, @@ -70,7 +70,7 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr"); if (of_property_read_u32(np, "cpu1-start-addr", - (u32 *) &cpu1start_addr)) + (u32 *) &socfpga_cpu1start_addr)) pr_err("SMP: Need cpu1-start-addr in device tree.\n"); sys_manager_base_addr = of_iomap(np, 0); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 92bba32d9230..9481f85c56e6 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -559,10 +559,10 @@ void __init mem_init(void) #ifdef CONFIG_MODULES " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif - " .text : 0x%p" " - 0x%p" " (%4d kB)\n" - " .init : 0x%p" " - 0x%p" " (%4d kB)\n" - " .data : 0x%p" " - 0x%p" " (%4d kB)\n" - " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", + " .text : 0x%p" " - 0x%p" " (%4td kB)\n" + " .init : 0x%p" " - 0x%p" " (%4td kB)\n" + " .data : 0x%p" " - 0x%p" " (%4td kB)\n" + " .bss : 0x%p" " - 0x%p" " (%4td kB)\n", MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index ee1d80593958..ba1196c968d8 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -279,7 +279,7 @@ ENTRY(\name\()_processor_functions) .if \suspend .word cpu_\name\()_suspend_size -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND .word cpu_\name\()_do_suspend .word cpu_\name\()_do_resume #else diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index c87aefbf3a13..9bd2776e7d05 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -268,8 +268,9 @@ config S5P_DEV_MFC comment "Power management" config SAMSUNG_PM_DEBUG - bool "S3C2410 PM Suspend debug" - depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART + bool "Samsung PM Suspend debug" + depends on PM && DEBUG_KERNEL + depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> diff --git a/arch/arm/plat-samsung/pm-debug.c b/arch/arm/plat-samsung/pm-debug.c index 8f19f66388dd..39609601f407 100644 --- a/arch/arm/plat-samsung/pm-debug.c +++ b/arch/arm/plat-samsung/pm-debug.c @@ -14,6 +14,7 @@ */ #include <linux/serial_core.h> +#include <linux/serial_s3c.h> #include <linux/io.h> #include <asm/mach/map.h> |