powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 689 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
new file mode 100644
index 000000000000..0966899d974b
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -0,0 +1,689 @@
+/*
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ */
+#ifndef _ASM_POWERPC_PPC_ASM_H
+#define _ASM_POWERPC_PPC_ASM_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#error __FILE__ should only be used in assembler files
+#else
+
+#define SZL			(BITS_PER_LONG/8)
+
+/*
+ * Stuff for accurate CPU time accounting.
+ * These macros handle transitions between user and system state
+ * in exception entry and exit and accumulate time to the
+ * user_time and system_time fields in the paca.
+ */
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)
+#else
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
+	beq	2f;			/* if from kernel mode */	\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_USER_TIME(r13);					\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_USER_TIME(r13);					\
+2:
+
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_SYSTEM_TIME(r13);				\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_SYSTEM_TIME(r13);
+#endif
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#ifdef __powerpc64__
+#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
+#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
+#else
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+				SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
+				REST_10GPRS(22, base)
+#endif
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
+				 ((rb) << 11) | (((xs) >> 5)))
+
+#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
+#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
+
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
+#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
+#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
+#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
+#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
+#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
+#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
+#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
+#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
+
+#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVRS(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVRS(n,s,base)	SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
+#define SAVE_8EVRS(n,s,base)	SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
+#define SAVE_16EVRS(n,s,base)	SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
+#define SAVE_32EVRS(n,s,base)	SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
+#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVRS(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVRS(n,s,base)	REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
+#define REST_8EVRS(n,s,base)	REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
+#define REST_16EVRS(n,s,base)	REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
+#define REST_32EVRS(n,s,base)	REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
+
+/* Macros to adjust thread priority for hardware multithreading */
+#define HMT_VERY_LOW	or	31,31,31	# very low priority
+#define HMT_LOW		or	1,1,1
+#define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
+#define HMT_MEDIUM	or	2,2,2
+#define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
+#define HMT_HIGH	or	3,3,3
+
+/* handle instructions that older assemblers may not know */
+#define RFCI		.long 0x4c000066	/* rfci instruction */
+#define RFDI		.long 0x4c00004e	/* rfdi instruction */
+#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+#define _GLOBAL(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_GLOBAL(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _STATIC(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_STATIC(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#else /* 32-bit */
+
+#define _ENTRY(n)	\
+	.globl n;	\
+n:
+
+#define _GLOBAL(n)	\
+	.text;		\
+	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
+	.globl n;	\
+n:
+
+#define _KPROBE(n)	\
+	.section ".kprobes.text","a";	\
+	.globl	n;	\
+n:
+
+#endif
+
+/* 
+ * LOAD_REG_IMMEDIATE(rn, expr)
+ *   Loads the value of the constant expression 'expr' into register 'rn'
+ *   using immediate instructions only.  Use this when it's important not
+ *   to reference other data (i.e. on ppc64 when the TOC pointer is not
+ *   valid).
+ *
+ * LOAD_REG_ADDR(rn, name)
+ *   Loads the address of label 'name' into register 'rn'.  Use this when
+ *   you don't particularly need immediate instructions only, but you need
+ *   the whole address in one register (e.g. it's a structure address and
+ *   you want to access various offsets within it).  On ppc32 this is
+ *   identical to LOAD_REG_IMMEDIATE.
+ *
+ * LOAD_REG_ADDRBASE(rn, name)
+ * ADDROFF(name)
+ *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
+ *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
+ *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
+ *   in size, so is suitable for use directly as an offset in load and store
+ *   instructions.  Use this when loading/storing a single word or less as:
+ *      LOAD_REG_ADDRBASE(rX, name)
+ *      ld	rY,ADDROFF(name)(rX)
+ */
+#ifdef __powerpc64__
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis     (reg),(expr)@highest;		\
+	ori     (reg),(reg),(expr)@higher;	\
+	rldicr  (reg),(reg),32,31;		\
+	oris    (reg),(reg),(expr)@h;		\
+	ori     (reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)			\
+	ld	(reg),name@got(r2)
+
+#define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
+#define ADDROFF(name)			0
+
+/* offsets for stack frame layout */
+#define LRSAVE	16
+
+#else /* 32-bit */
+
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis	(reg),(expr)@ha;		\
+	addi	(reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
+
+#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
+#define ADDROFF(name)			name@l
+
+/* offsets for stack frame layout */
+#define LRSAVE	4
+
+#endif
+
+/* various errata or part fixups */
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifdef CONFIG_PPC_CELL
+#define MFTB(dest)			\
+90:	mftb  dest;			\
+BEGIN_FTR_SECTION_NESTED(96);		\
+	cmpwi dest,0;			\
+	beq-  90b;			\
+END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#else
+#define MFTB(dest)			mftb dest
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+	
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
+
+#if defined(CONFIG_BOOKE)
+#define toreal(rd)
+#define fromreal(rd)
+
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
+#define tophys(rd,rs)				\
+	addis	rd,rs,0
+
+#define tovirt(rd,rs)				\
+	addis	rd,rs,0
+
+#elif defined(CONFIG_PPC64)
+#define toreal(rd)		/* we can access c000... in real mode */
+#define fromreal(rd)
+
+#define tophys(rd,rs)                           \
+	clrldi	rd,rs,2
+
+#define tovirt(rd,rs)                           \
+	rotldi	rd,rs,16;			\
+	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
+	rotldi	rd,rd,48
+#else
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define toreal(rd)	tophys(rd,rd)
+#define fromreal(rd)	tovirt(rd,rd)
+
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+#endif
+
+#ifdef CONFIG_PPC64
+#define RFI		rfid
+#define MTMSRD(r)	mtmsrd	r
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define	RFI		rfi
+#else
+#define RFI		rfi; b .	/* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif
+
+#endif /* __KERNEL__ */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+/* AltiVec Registers (VPRs) */
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+/* VSX Registers (VSRs) */
+
+#define	vsr0	0
+#define	vsr1	1
+#define	vsr2	2
+#define	vsr3	3
+#define	vsr4	4
+#define	vsr5	5
+#define	vsr6	6
+#define	vsr7	7
+#define	vsr8	8
+#define	vsr9	9
+#define	vsr10	10
+#define	vsr11	11
+#define	vsr12	12
+#define	vsr13	13
+#define	vsr14	14
+#define	vsr15	15
+#define	vsr16	16
+#define	vsr17	17
+#define	vsr18	18
+#define	vsr19	19
+#define	vsr20	20
+#define	vsr21	21
+#define	vsr22	22
+#define	vsr23	23
+#define	vsr24	24
+#define	vsr25	25
+#define	vsr26	26
+#define	vsr27	27
+#define	vsr28	28
+#define	vsr29	29
+#define	vsr30	30
+#define	vsr31	31
+#define	vsr32	32
+#define	vsr33	33
+#define	vsr34	34
+#define	vsr35	35
+#define	vsr36	36
+#define	vsr37	37
+#define	vsr38	38
+#define	vsr39	39
+#define	vsr40	40
+#define	vsr41	41
+#define	vsr42	42
+#define	vsr43	43
+#define	vsr44	44
+#define	vsr45	45
+#define	vsr46	46
+#define	vsr47	47
+#define	vsr48	48
+#define	vsr49	49
+#define	vsr50	50
+#define	vsr51	51
+#define	vsr52	52
+#define	vsr53	53
+#define	vsr54	54
+#define	vsr55	55
+#define	vsr56	56
+#define	vsr57	57
+#define	vsr58	58
+#define	vsr59	59
+#define	vsr60	60
+#define	vsr61	61
+#define	vsr62	62
+#define	vsr63	63
+
+/* SPE Registers (EVPRs) */
+
+#define	evr0	0
+#define	evr1	1
+#define	evr2	2
+#define	evr3	3
+#define	evr4	4
+#define	evr5	5
+#define	evr6	6
+#define	evr7	7
+#define	evr8	8
+#define	evr9	9
+#define	evr10	10
+#define	evr11	11
+#define	evr12	12
+#define	evr13	13
+#define	evr14	14
+#define	evr15	15
+#define	evr16	16
+#define	evr17	17
+#define	evr18	18
+#define	evr19	19
+#define	evr20	20
+#define	evr21	21
+#define	evr22	22
+#define	evr23	23
+#define	evr24	24
+#define	evr25	25
+#define	evr26	26
+#define	evr27	27
+#define	evr28	28
+#define	evr29	29
+#define	evr30	30
+#define	evr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PPC_ASM_H */