diff options
author | Timur Tabi <timur@freescale.com> | 2007-10-03 11:34:59 -0500 |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2007-10-08 08:38:15 -0500 |
commit | 6b0b594bb81f86dbc7b0829ee5102abaab242913 (patch) | |
tree | 707463987ab05d04596763afa9db1c63cbde4c4a /arch/powerpc/sysdev/qe_lib | |
parent | 6039680705906f270411435c05c869ac4f59ef10 (diff) | |
download | linux-stable-6b0b594bb81f86dbc7b0829ee5102abaab242913.tar.gz linux-stable-6b0b594bb81f86dbc7b0829ee5102abaab242913.tar.bz2 linux-stable-6b0b594bb81f86dbc7b0829ee5102abaab242913.zip |
[POWERPC] qe: miscellaneous code improvements and fixes to the QE library
This patch makes numerous miscellaneous code improvements to the QE library.
1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
(every caller of ucc_init_guemr() also calls ucc_set_type()). Modify all
callers of ucc_set_type() accordingly.
2. Remove the unused enum ucc_pram_initial_offset.
3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.
4. Several printk() calls were missing the terminating \n.
5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
appropriate.
6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
with the wrong value.
7. Add the protocol type to struct us_info and updated ucc_slow_init() to
use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.
8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()
9. Add several macros in qe.h (mostly for slow UCC support, but also to
standardize some naming convention) and remove several unused macros.
10. Update ucc_geth.c to use the new macros.
11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
to use when initializing the UCC in ucc_slow_init().
12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
these are the real names of the registers.
13. Use the setbits, clrbits, and clrsetbits where appropriate.
14. Refactor ucc_set_qe_mux_rxtx().
15. Remove all instances of 'volatile'.
16. Simplify get_cmxucr_reg();
17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].
18. Updated struct ucc_geth because struct ucc_fast is not padded any more.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/sysdev/qe_lib')
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe.c | 36 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/qe_io.c | 35 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/ucc.c | 270 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/ucc_fast.c | 127 | ||||
-rw-r--r-- | arch/powerpc/sysdev/qe_lib/ucc_slow.c | 48 |
6 files changed, 236 insertions, 282 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 90f87408b5d5..3d57d3835b04 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd); * 16 BRGs, which can be connected to the QE channels or output * as clocks. The BRGs are in two different block of internal * memory mapped space. - * The baud rate clock is the system clock divided by something. + * The BRG clock is the QE clock divided by 2. * It was set up long ago during the initial boot phase and is * is given to us. * Baud rate clocks are zero-based in the driver code (as that maps @@ -165,28 +165,38 @@ unsigned int get_brg_clk(void) return brg_clk; } -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, 1-16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + * + * Also note that the value programmed into the BRGC register must be even. */ -void qe_setbrg(u32 brg, u32 rate) +void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier) { - volatile u32 *bp; u32 divisor, tempval; - int div16 = 0; + u32 div16 = 0; - bp = &qe_immr->brg.brgc[brg]; + divisor = get_brg_clk() / (rate * multiplier); - divisor = (get_brg_clk() / rate); if (divisor > QE_BRGC_DIVISOR_MAX + 1) { - div16 = 1; + div16 = QE_BRGC_DIV16; divisor /= 16; } - tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE; - if (div16) - tempval |= QE_BRGC_DIV16; + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (!div16 && (divisor & 1)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; - out_be32(bp, tempval); + out_be32(&qe_immr->brg.brgc[brg - 1], tempval); } /* Initialize SNUMs (thread serial numbers) according to diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 55e6f394af82..9a2d1edd050e 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -405,8 +405,6 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags) set_irq_data(qe_ic->virq_high, qe_ic); set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high); } - - printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs); } void qe_ic_set_highest_priority(unsigned int virq, int high) diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index e32b45bf9ff5..a114cb0c572f 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config); #ifdef DEBUG static void dump_par_io(void) { - int i; + unsigned int i; - printk(KERN_INFO "PAR IO registars:\n"); - printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io); + printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io); for (i = 0; i < num_par_io_ports; i++) { - printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpodr, - in_be32(&par_io[i].cpodr)); - printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdata, - in_be32(&par_io[i].cpdata)); - printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdir1, - in_be32(&par_io[i].cpdir1)); - printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cpdir2, - in_be32(&par_io[i].cpdir2)); - printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cppar1, - in_be32(&par_io[i].cppar1)); - printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n", - i, (u32) & par_io[i].cppar2, - in_be32(&par_io[i].cppar2)); + printk(KERN_INFO " cpodr[%u]=%08x\n", i, + in_be32(&par_io[i].cpodr)); + printk(KERN_INFO " cpdata[%u]=%08x\n", i, + in_be32(&par_io[i].cpdata)); + printk(KERN_INFO " cpdir1[%u]=%08x\n", i, + in_be32(&par_io[i].cpdir1)); + printk(KERN_INFO " cpdir2[%u]=%08x\n", i, + in_be32(&par_io[i].cpdir2)); + printk(KERN_INFO " cppar1[%u]=%08x\n", i, + in_be32(&par_io[i].cppar1)); + printk(KERN_INFO " cppar2[%u]=%08x\n", i, + in_be32(&par_io[i].cppar2)); } } diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c index f970e5415ac0..0e348d9af8a6 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc.c +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -28,228 +28,188 @@ static DEFINE_SPINLOCK(ucc_lock); -int ucc_set_qe_mux_mii_mng(int ucc_num) +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) { unsigned long flags; + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + spin_lock_irqsave(&ucc_lock, flags); - out_be32(&qe_immr->qmx.cmxgcr, - ((in_be32(&qe_immr->qmx.cmxgcr) & - ~QE_CMXGCR_MII_ENET_MNG) | - (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT))); + clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG, + ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT); spin_unlock_irqrestore(&ucc_lock, flags); return 0; } EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng); -int ucc_set_type(int ucc_num, struct ucc_common *regs, - enum ucc_speed_type speed) -{ - u8 guemr = 0; - - /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) - return -EINVAL; - - guemr = regs->guemr; - guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX); - switch (speed) { - case UCC_SPEED_TYPE_SLOW: - guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX); - break; - case UCC_SPEED_TYPE_FAST: - guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX); - break; - default: - return -EINVAL; - } - regs->guemr = guemr; - - return 0; -} - -int ucc_init_guemr(struct ucc_common *regs) +/* Configure the UCC to either Slow or Fast. + * + * A given UCC can be figured to support either "slow" devices (e.g. UART) + * or "fast" devices (e.g. Ethernet). + * + * 'ucc_num' is the UCC number, from 0 - 7. + * + * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit + * must always be set to 1. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed) { - u8 guemr = 0; - - if (!regs) - return -EINVAL; - - /* Set bit 3 (which is reserved in the GUEMR register) to 1 */ - guemr = UCC_GUEMR_SET_RESERVED3; - - regs->guemr = guemr; - - return 0; -} + u8 __iomem *guemr; -static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num, - u8 * shift) -{ + /* The GUEMR register is at the same location for both slow and fast + devices, so we just use uccX.slow.guemr. */ switch (ucc_num) { - case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1); - *reg_num = 1; - *shift = 16; + case 0: guemr = &qe_immr->ucc1.slow.guemr; break; - case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1); - *reg_num = 1; - *shift = 0; + case 1: guemr = &qe_immr->ucc2.slow.guemr; break; - case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2); - *reg_num = 2; - *shift = 16; + case 2: guemr = &qe_immr->ucc3.slow.guemr; break; - case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2); - *reg_num = 2; - *shift = 0; + case 3: guemr = &qe_immr->ucc4.slow.guemr; break; - case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3); - *reg_num = 3; - *shift = 16; + case 4: guemr = &qe_immr->ucc5.slow.guemr; break; - case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3); - *reg_num = 3; - *shift = 0; + case 5: guemr = &qe_immr->ucc6.slow.guemr; break; - case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4); - *reg_num = 4; - *shift = 16; + case 6: guemr = &qe_immr->ucc7.slow.guemr; break; - case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4); - *reg_num = 4; - *shift = 0; + case 7: guemr = &qe_immr->ucc8.slow.guemr; break; default: - break; + return -EINVAL; } + + clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK, + UCC_GUEMR_SET_RESERVED3 | speed); + + return 0; +} + +static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr, + unsigned int *reg_num, unsigned int *shift) +{ + unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3); + + *reg_num = cmx + 1; + *cmxucr = &qe_immr->qmx.cmxucr[cmx]; + *shift = 16 - 8 * (ucc_num & 2); } -int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask) +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask) { - volatile u32 *p_cmxucr; - u8 reg_num; - u8 shift; + __be32 *cmxucr; + unsigned int reg_num; + unsigned int shift; /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + if (ucc_num > UCC_MAX_NUM - 1) return -EINVAL; - get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); if (set) - out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift)); + setbits32(cmxucr, mask << shift); else - out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift)); + clrbits32(cmxucr, mask << shift); return 0; } -int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode) { - volatile u32 *p_cmxucr; - u8 reg_num; - u8 shift; - u32 clock_bits; - u32 clock_mask; - int source = -1; + __be32 *cmxucr; + unsigned int reg_num; + unsigned int shift; + u32 clock_bits = 0; /* check if the UCC number is in range. */ - if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) + if (ucc_num > UCC_MAX_NUM - 1) return -EINVAL; - if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { - printk(KERN_ERR - "ucc_set_qe_mux_rxtx: bad comm mode type passed."); + /* The communications direction must be RX or TX */ + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) return -EINVAL; - } - get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); switch (reg_num) { case 1: switch (clock) { - case QE_BRG1: source = 1; break; - case QE_BRG2: source = 2; break; - case QE_BRG7: source = 3; break; - case QE_BRG8: source = 4; break; - case QE_CLK9: source = 5; break; - case QE_CLK10: source = 6; break; - case QE_CLK11: source = 7; break; - case QE_CLK12: source = 8; break; - case QE_CLK15: source = 9; break; - case QE_CLK16: source = 10; break; - default: source = -1; break; + case QE_BRG1: clock_bits = 1; break; + case QE_BRG2: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK9: clock_bits = 5; break; + case QE_CLK10: clock_bits = 6; break; + case QE_CLK11: clock_bits = 7; break; + case QE_CLK12: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; } break; case 2: switch (clock) { - case QE_BRG5: source = 1; break; - case QE_BRG6: source = 2; break; - case QE_BRG7: source = 3; break; - case QE_BRG8: source = 4; break; - case QE_CLK13: source = 5; break; - case QE_CLK14: source = 6; break; - case QE_CLK19: source = 7; break; - case QE_CLK20: source = 8; break; - case QE_CLK15: source = 9; break; - case QE_CLK16: source = 10; break; - default: source = -1; break; + case QE_BRG5: clock_bits = 1; break; + case QE_BRG6: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK13: clock_bits = 5; break; + case QE_CLK14: clock_bits = 6; break; + case QE_CLK19: clock_bits = 7; break; + case QE_CLK20: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; } break; case 3: switch (clock) { - case QE_BRG9: source = 1; break; - case QE_BRG10: source = 2; break; - case QE_BRG15: source = 3; break; - case QE_BRG16: source = 4; break; - case QE_CLK3: source = 5; break; - case QE_CLK4: source = 6; break; - case QE_CLK17: source = 7; break; - case QE_CLK18: source = 8; break; - case QE_CLK7: source = 9; break; - case QE_CLK8: source = 10; break; - case QE_CLK16: source = 11; break; - default: source = -1; break; + case QE_BRG9: clock_bits = 1; break; + case QE_BRG10: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK3: clock_bits = 5; break; + case QE_CLK4: clock_bits = 6; break; + case QE_CLK17: clock_bits = 7; break; + case QE_CLK18: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; } break; case 4: switch (clock) { - case QE_BRG13: source = 1; break; - case QE_BRG14: source = 2; break; - case QE_BRG15: source = 3; break; - case QE_BRG16: source = 4; break; - case QE_CLK5: source = 5; break; - case QE_CLK6: source = 6; break; - case QE_CLK21: source = 7; break; - case QE_CLK22: source = 8; break; - case QE_CLK7: source = 9; break; - case QE_CLK8: source = 10; break; - case QE_CLK16: source = 11; break; - default: source = -1; break; + case QE_BRG13: clock_bits = 1; break; + case QE_BRG14: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK5: clock_bits = 5; break; + case QE_CLK6: clock_bits = 6; break; + case QE_CLK21: clock_bits = 7; break; + case QE_CLK22: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; } break; - default: - source = -1; - break; + default: break; } - if (source == -1) { - printk(KERN_ERR - "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC."); + /* Check for invalid combination of clock and UCC number */ + if (!clock_bits) return -ENOENT; - } - clock_bits = (u32) source; - clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK; - if (mode == COMM_DIR_RX) { - clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */ - clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */ - } - clock_bits <<= shift; - clock_mask <<= shift; + if (mode == COMM_DIR_RX) + shift += 4; - out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits); + clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift, + clock_bits << shift); return 0; } diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index 3df202e8d332..3223acbc39e5 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -30,46 +30,45 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf) { - printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num); - printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs); - - printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); - printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); - printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); - printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); - printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); - printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); - printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x", - (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs); - printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); - printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); - printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); - printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->urfset, - in_be16(&uccf->uf_regs->urfset)); - printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); - printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); - printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); - printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); - printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x", - (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); - printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x", - (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); - printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x", - (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr); + printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); + + printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->uccs, uccf->uf_regs->uccs); + printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); + printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->guemr, uccf->uf_regs->guemr); } EXPORT_SYMBOL(ucc_fast_dump_regs); @@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); return -EINVAL; } /* Check that 'max_rx_buf_length' is properly aligned (4). */ if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__); + printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", + __FUNCTION__); return -EINVAL; } /* Validate Virtual Fifo register values */ if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { - printk(KERN_ERR "%s: urfs is too small", __FUNCTION__); + printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__); + printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__); return -EINVAL; } if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__); return -EINVAL; } if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { - printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__); + printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__); return -EINVAL; } uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); if (!uccf) { - printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); + printk(KERN_ERR "%s: Cannot allocate private data\n", + __FUNCTION__); return -ENOMEM; } @@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* Set the PHY base address */ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); if (uccf->uf_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); return -ENOMEM; } @@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->rx_discarded = 0; #endif /* STATISTICS */ - /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) { - printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); - ucc_fast_free(uccf); - return ret; - } - /* Set UCC to fast type */ - if ((ret = ucc_set_type(uf_info->ucc_num, - (struct ucc_common *) (uf_regs), - UCC_SPEED_TYPE_FAST))) { - printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); + ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__); ucc_fast_free(uccf); return ret; } @@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc uccf->ucc_fast_tx_virtual_fifo_base_offset = qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", + __FUNCTION__); uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { - printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", + __FUNCTION__); uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; ucc_fast_free(uccf); return -ENOMEM; @@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((uf_info->rx_clock != QE_CLK_NONE) && ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, COMM_DIR_RX)) { - printk(KERN_ERR "%s: illegal value for RX clock", + printk(KERN_ERR "%s: illegal value for RX clock\n", __FUNCTION__); ucc_fast_free(uccf); return -EINVAL; @@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc if ((uf_info->tx_clock != QE_CLK_NONE) && ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, COMM_DIR_TX)) { - printk(KERN_ERR "%s: illegal value for TX clock", + printk(KERN_ERR "%s: illegal value for TX clock\n", __FUNCTION__); ucc_fast_free(uccf); return -EINVAL; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 1f65c26ce63f..0174b3aeef8f 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) out_be32(&us_regs->gumr_l, gumr_l); } +/* Initialize the UCC for Slow operations + * + * The caller should initialize the following us_info + */ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) { struct ucc_slow_private *uccs; u32 i; - struct ucc_slow *us_regs; + struct ucc_slow __iomem *us_regs; u32 gumr; struct qe_bd *bd; u32 id; @@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__); + printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__); return -EINVAL; } @@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc */ if ((!us_info->rfw) && (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { - printk(KERN_ERR "max_rx_buf_length not aligned."); + printk(KERN_ERR "max_rx_buf_length not aligned.\n"); return -EINVAL; } uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); if (!uccs) { - printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__); + printk(KERN_ERR "%s: Cannot allocate private data\n", + __FUNCTION__); return -ENOMEM; } @@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set the PHY base address */ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); if (uccs->us_regs == NULL) { - printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__); + printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__); return -ENOMEM; } @@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc return -ENOMEM; } id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); - qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED, + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol, uccs->us_pram_offset); uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); - /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) { - printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); - ucc_slow_free(uccs); - return ret; - } - /* Set UCC to slow type */ - if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) us_regs, - UCC_SPEED_TYPE_SLOW))) { + ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); + if (ret) { printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_slow_free(uccs); return ret; @@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), QE_ALIGNMENT_OF_BD); if (IS_ERR_VALUE(uccs->rx_base_offset)) { - printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__); + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__, + us_info->rx_bd_ring_len); uccs->rx_base_offset = 0; ucc_slow_free(uccs); return -ENOMEM; @@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* if the data is in cachable memory, the 'global' */ /* in the function code should be set. */ - uccs->us_pram->tfcr = uccs->us_pram->rfcr = - us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT; + uccs->us_pram->tbmr = UCC_BMR_BO_BE; + uccs->us_pram->rbmr = UCC_BMR_BO_BE; /* rbase, tbase are offsets from MURAM base */ - out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset); - out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset); + out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset); + out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset); /* Mux clocking */ /* Grant Support */ @@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Rx clock routing */ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) { - printk(KERN_ERR "%s: illegal value for RX clock", + printk(KERN_ERR "%s: illegal value for RX clock\n", __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; @@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Tx clock routing */ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, COMM_DIR_TX)) { - printk(KERN_ERR "%s: illegal value for TX clock", + printk(KERN_ERR "%s: illegal value for TX clock\n", __FUNCTION__); ucc_slow_free(uccs); return -EINVAL; @@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc command = QE_INIT_TX; else command = QE_INIT_RX; /* We know at least one is TRUE */ - id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); - qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); + + qe_issue_cmd(command, id, us_info->protocol, 0); *uccs_ret = uccs; return 0; |