[S390] Whitespace cleanup.

Huge s390 assembly files whitespace cleanup.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 216 insertions, 216 deletions

diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index a8bdd96494c7..48998d50b00a 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -15,232 +15,232 @@
 # this is called either by the ipl loader or directly by PSW restart
 # or linload or SALIPL
 #
-	.org  0x10000
-startup:basr  %r13,0			 # get base
-.LPG0:	l     %r13,0f-.LPG0(%r13)
-	b     0(%r13)
-0:	.long startup_continue
+	.org	0x10000
+startup:basr	%r13,0			# get base
+.LPG0:	l	%r13,0f-.LPG0(%r13)
+	b	0(%r13)
+0:	.long	startup_continue
 
 #
 # params at 10400 (setup.h)
 #
-	.org   PARMAREA
-	.quad  0			# IPL_DEVICE
-	.quad  0			# INITRD_START
-	.quad  0			# INITRD_SIZE
+	.org	PARMAREA
+	.quad	0			# IPL_DEVICE
+	.quad	0			# INITRD_START
+	.quad	0			# INITRD_SIZE
 
-	.org   COMMAND_LINE
-	.byte  "root=/dev/ram0 ro"
-	.byte  0
+	.org	COMMAND_LINE
+	.byte	"root=/dev/ram0 ro"
+	.byte	0
 
-	.org   0x11000
+	.org	0x11000
 
 startup_continue:
-	basr  %r13,0			 # get base
-.LPG1:  sll   %r13,1                     # remove high order bit
-        srl   %r13,1
-        lhi   %r1,1                      # mode 1 = esame
-	mvi   __LC_AR_MODE_ID,1		 # set esame flag
-        slr   %r0,%r0                    # set cpuid to zero
-        sigp  %r1,%r0,0x12               # switch to esame mode
-	sam64				 # switch to 64 bit mode
-	lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
-	lg    %r12,.Lparmaddr-.LPG1(%r13)# pointer to parameter area
-					 # move IPL device to lowcore
-        mvc   __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
+	basr	%r13,0			# get base
+.LPG1:	sll	%r13,1			# remove high order bit
+	srl	%r13,1
+	lhi	%r1,1			# mode 1 = esame
+	mvi	__LC_AR_MODE_ID,1	# set esame flag
+	slr	%r0,%r0 		# set cpuid to zero
+	sigp	%r1,%r0,0x12		# switch to esame mode
+	sam64				# switch to 64 bit mode
+	lctlg	%c0,%c15,.Lctl-.LPG1(%r13)	# load control registers
+	lg	%r12,.Lparmaddr-.LPG1(%r13)	# pointer to parameter area
+					# move IPL device to lowcore
+	mvc	__LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
 #
 # Setup stack
 #
-	larl  %r15,init_thread_union
-	lg    %r14,__TI_task(%r15)	# cache current in lowcore
-	stg   %r14,__LC_CURRENT
-	aghi  %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
-	stg   %r15,__LC_KERNEL_STACK	# set end of kernel stack
-	aghi  %r15,-160
-	xc    __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
+	larl	%r15,init_thread_union
+	lg	%r14,__TI_task(%r15)	# cache current in lowcore
+	stg	%r14,__LC_CURRENT
+	aghi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
+	stg	%r15,__LC_KERNEL_STACK	# set end of kernel stack
+	aghi	%r15,-160
+	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
 
-	brasl %r14,ipl_save_parameters
+	brasl	%r14,ipl_save_parameters
 #
 # clear bss memory
 #
-	larl  %r2,__bss_start           # start of bss segment
-        larl  %r3,_end                  # end of bss segment
-        sgr   %r3,%r2                   # length of bss
-        sgr   %r4,%r4                   #
-        sgr   %r5,%r5                   # set src,length and pad to zero
-        mvcle %r2,%r4,0                 # clear mem
-        jo    .-4                       # branch back, if not finish
+	larl	%r2,__bss_start 	# start of bss segment
+	larl	%r3,_end		# end of bss segment
+	sgr	%r3,%r2 		# length of bss
+	sgr	%r4,%r4 		#
+	sgr	%r5,%r5 		# set src,length and pad to zero
+	mvcle	%r2,%r4,0		# clear mem
+	jo	.-4			# branch back, if not finish
 
-	l     %r2,.Lrcp-.LPG1(%r13)	# Read SCP forced command word
+	l	%r2,.Lrcp-.LPG1(%r13)	# Read SCP forced command word
 .Lservicecall:
-	stosm .Lpmask-.LPG1(%r13),0x01	# authorize ext interrupts
+	stosm	.Lpmask-.LPG1(%r13),0x01	# authorize ext interrupts
 
-	stctg %r0,%r0,.Lcr-.LPG1(%r13)	# get cr0
-	la    %r1,0x200			# set bit 22
-	og    %r1,.Lcr-.LPG1(%r13)	# or old cr0 with r1
-	stg   %r1,.Lcr-.LPG1(%r13)
-	lctlg %r0,%r0,.Lcr-.LPG1(%r13)	# load modified cr0
+	stctg	%r0,%r0,.Lcr-.LPG1(%r13)	# get cr0
+	la	%r1,0x200		# set bit 22
+	og	%r1,.Lcr-.LPG1(%r13)	# or old cr0 with r1
+	stg	%r1,.Lcr-.LPG1(%r13)
+	lctlg	%r0,%r0,.Lcr-.LPG1(%r13)	# load modified cr0
 
-	mvc   __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
-	larl  %r1,.Lsclph
-	stg   %r1,__LC_EXT_NEW_PSW+8	# set handler
+	mvc	__LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
+	larl	%r1,.Lsclph
+	stg	%r1,__LC_EXT_NEW_PSW+8	# set handler
 
-	larl  %r4,.Lsccb		# %r4 is our index for sccb stuff
-	lgr   %r1,%r4			# our sccb
-	.insn rre,0xb2200000,%r2,%r1	# service call
-	ipm   %r1
-	srl   %r1,28			# get cc code
-	xr    %r3,%r3
-	chi   %r1,3
-	be    .Lfchunk-.LPG1(%r13)	# leave
-	chi   %r1,2
-	be    .Lservicecall-.LPG1(%r13)
-	lpswe .Lwaitsclp-.LPG1(%r13)
+	larl	%r4,.Lsccb		# %r4 is our index for sccb stuff
+	lgr	%r1,%r4			# our sccb
+	.insn	rre,0xb2200000,%r2,%r1	# service call
+	ipm	%r1
+	srl	%r1,28			# get cc code
+	xr	%r3,%r3
+	chi	%r1,3
+	be	.Lfchunk-.LPG1(%r13)	# leave
+	chi	%r1,2
+	be	.Lservicecall-.LPG1(%r13)
+	lpswe	.Lwaitsclp-.LPG1(%r13)
 .Lsclph:
-	lh    %r1,.Lsccbr-.Lsccb(%r4)
-	chi   %r1,0x10			# 0x0010 is the sucess code
-	je    .Lprocsccb		# let's process the sccb
-	chi   %r1,0x1f0
-	bne   .Lfchunk-.LPG1(%r13)	# unhandled error code
-	c     %r2,.Lrcp-.LPG1(%r13)	# Did we try Read SCP forced
-	bne   .Lfchunk-.LPG1(%r13)	# if no, give up
-	l     %r2,.Lrcp2-.LPG1(%r13)	# try with Read SCP
-	b     .Lservicecall-.LPG1(%r13)
+	lh	%r1,.Lsccbr-.Lsccb(%r4)
+	chi	%r1,0x10		# 0x0010 is the sucess code
+	je	.Lprocsccb		# let's process the sccb
+	chi	%r1,0x1f0
+	bne	.Lfchunk-.LPG1(%r13)	# unhandled error code
+	c	%r2,.Lrcp-.LPG1(%r13)	# Did we try Read SCP forced
+	bne	.Lfchunk-.LPG1(%r13)	# if no, give up
+	l	%r2,.Lrcp2-.LPG1(%r13)	# try with Read SCP
+	b	.Lservicecall-.LPG1(%r13)
 .Lprocsccb:
-	lghi  %r1,0
-	icm   %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
-	jnz   .Lscnd
-	lg    %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
+	lghi	%r1,0
+	icm	%r1,3,.Lscpincr1-.Lsccb(%r4)	# use this one if != 0
+	jnz	.Lscnd
+	lg	%r1,.Lscpincr2-.Lsccb(%r4)	# otherwise use this one
 .Lscnd:
-	xr    %r3,%r3			# same logic
-	ic    %r3,.Lscpa1-.Lsccb(%r4)
-	chi   %r3,0x00
-	jne   .Lcompmem
-	l     %r3,.Lscpa2-.Lsccb(%r4)
+	xr	%r3,%r3			# same logic
+	ic	%r3,.Lscpa1-.Lsccb(%r4)
+	chi	%r3,0x00
+	jne	.Lcompmem
+	l	%r3,.Lscpa2-.Lsccb(%r4)
 .Lcompmem:
-	mlgr  %r2,%r1			# mem in MB on 128-bit
-	l     %r1,.Lonemb-.LPG1(%r13)
-	mlgr  %r2,%r1			# mem size in bytes in %r3
-	b     .Lfchunk-.LPG1(%r13)
+	mlgr	%r2,%r1			# mem in MB on 128-bit
+	l	%r1,.Lonemb-.LPG1(%r13)
+	mlgr	%r2,%r1			# mem size in bytes in %r3
+	b	.Lfchunk-.LPG1(%r13)
 
-	.align 4
+	.align	4
 .Lpmask:
-	.byte 0
-	.align 8
+	.byte	0
+	.align	8
 .Lcr:
-	.quad 0x00  # place holder for cr0
+	.quad	0x00  # place holder for cr0
 .Lwaitsclp:
-	.quad  0x0102000180000000,.Lsclph
+	.quad	0x0102000180000000,.Lsclph
 .Lrcp:
-	.int 0x00120001 # Read SCP forced code
+	.int	0x00120001 # Read SCP forced code
 .Lrcp2:
-	.int 0x00020001 # Read SCP code
+	.int	0x00020001 # Read SCP code
 .Lonemb:
-	.int 0x100000
+	.int	0x100000
 
 .Lfchunk:
-					 # set program check new psw mask
-	mvc   __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
+					# set program check new psw mask
+	mvc	__LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
 
 #
 # find memory chunks.
 #
-	lgr   %r9,%r3			 # end of mem
-	larl  %r1,.Lchkmem               # set program check address
-	stg   %r1,__LC_PGM_NEW_PSW+8
-	la    %r1,1                      # test in increments of 128KB
-	sllg  %r1,%r1,17
-	larl  %r3,memory_chunk
-	slgr  %r4,%r4                    # set start of chunk to zero
-	slgr  %r5,%r5                    # set end of chunk to zero
-	slr  %r6,%r6			 # set access code to zero
-	la    %r10,MEMORY_CHUNKS	 # number of chunks
+	lgr	%r9,%r3			# end of mem
+	larl	%r1,.Lchkmem		# set program check address
+	stg	%r1,__LC_PGM_NEW_PSW+8
+	la	%r1,1			# test in increments of 128KB
+	sllg	%r1,%r1,17
+	larl	%r3,memory_chunk
+	slgr	%r4,%r4 		# set start of chunk to zero
+	slgr	%r5,%r5 		# set end of chunk to zero
+	slr	%r6,%r6			# set access code to zero
+	la	%r10,MEMORY_CHUNKS	# number of chunks
 .Lloop:
-	tprot 0(%r5),0			 # test protection of first byte
-	ipm   %r7
-	srl   %r7,28
-	clr   %r6,%r7			 # compare cc with last access code
-	je    .Lsame
-	j     .Lchkmem
+	tprot	0(%r5),0		# test protection of first byte
+	ipm	%r7
+	srl	%r7,28
+	clr	%r6,%r7			# compare cc with last access code
+	je	.Lsame
+	j	.Lchkmem
 .Lsame:
-	algr  %r5,%r1			 # add 128KB to end of chunk
-					 # no need to check here,
-	brc   12,.Lloop			 # this is the same chunk
-.Lchkmem:				 # > 16EB or tprot got a program check
-	clgr  %r4,%r5			 # chunk size > 0?
-	je    .Lchkloop
-	stg   %r4,0(%r3)		 # store start address of chunk
-	lgr   %r0,%r5
-	slgr  %r0,%r4
-	stg   %r0,8(%r3)		 # store size of chunk
-	st    %r6,20(%r3)		 # store type of chunk
-	la    %r3,24(%r3)
-	larl  %r8,memory_size
-	stg   %r5,0(%r8)                 # store memory size
-	ahi   %r10,-1			 # update chunk number
+	algr	%r5,%r1			# add 128KB to end of chunk
+					# no need to check here,
+	brc	12,.Lloop		# this is the same chunk
+.Lchkmem:				# > 16EB or tprot got a program check
+	clgr	%r4,%r5			# chunk size > 0?
+	je	.Lchkloop
+	stg	%r4,0(%r3)		# store start address of chunk
+	lgr	%r0,%r5
+	slgr	%r0,%r4
+	stg	%r0,8(%r3)		# store size of chunk
+	st	%r6,20(%r3)		# store type of chunk
+	la	%r3,24(%r3)
+	larl	%r8,memory_size
+	stg	%r5,0(%r8)		# store memory size
+	ahi	%r10,-1			# update chunk number
 .Lchkloop:
-	lr    %r6,%r7			 # set access code to last cc
+	lr	%r6,%r7			# set access code to last cc
 	# we got an exception or we're starting a new
 	# chunk , we must check if we should
 	# still try to find valid memory (if we detected
 	# the amount of available storage), and if we
 	# have chunks left
-	lghi  %r4,1
-	sllg  %r4,%r4,31
-	clgr  %r5,%r4
-	je    .Lhsaskip
-	xr    %r0, %r0
-	clgr  %r0, %r9			 # did we detect memory?
-	je    .Ldonemem			 # if not, leave
-	chi   %r10, 0			 # do we have chunks left?
-	je    .Ldonemem
+	lghi	%r4,1
+	sllg	%r4,%r4,31
+	clgr	%r5,%r4
+	je	.Lhsaskip
+	xr	%r0, %r0
+	clgr	%r0, %r9		# did we detect memory?
+	je	.Ldonemem		# if not, leave
+	chi	%r10, 0			# do we have chunks left?
+	je	.Ldonemem
 .Lhsaskip:
-	algr  %r5,%r1			 # add 128KB to end of chunk
-	lgr   %r4,%r5			 # potential new chunk
-	clgr  %r5,%r9			 # should we go on?
-	jl    .Lloop
-.Ldonemem:		
+	algr	%r5,%r1			# add 128KB to end of chunk
+	lgr	%r4,%r5			# potential new chunk
+	clgr	%r5,%r9			# should we go on?
+	jl	.Lloop
+.Ldonemem:
 
-	larl  %r12,machine_flags
+	larl	%r12,machine_flags
 #
 # find out if we are running under VM
 #
-        stidp  __LC_CPUID               # store cpuid
-	tm     __LC_CPUID,0xff          # running under VM ?
-	bno    0f-.LPG1(%r13)
-        oi     7(%r12),1                # set VM flag
-0:      lh     %r0,__LC_CPUID+4         # get cpu version
-        chi    %r0,0x7490               # running on a P/390 ?
-        bne    1f-.LPG1(%r13)
-        oi     7(%r12),4                # set P/390 flag
+	stidp	__LC_CPUID		# store cpuid
+	tm	__LC_CPUID,0xff 	# running under VM ?
+	bno	0f-.LPG1(%r13)
+	oi	7(%r12),1		# set VM flag
+0:	lh	%r0,__LC_CPUID+4	# get cpu version
+	chi	%r0,0x7490		# running on a P/390 ?
+	bne	1f-.LPG1(%r13)
+	oi	7(%r12),4		# set P/390 flag
 1:
 
 #
 # find out if we have the MVPG instruction
 #
-	la     %r1,0f-.LPG1(%r13)       # set program check address
-	stg    %r1,__LC_PGM_NEW_PSW+8
-	sgr    %r0,%r0
-	lghi   %r1,0
-	lghi   %r2,0
-	mvpg   %r1,%r2                  # test MVPG instruction
-	oi     7(%r12),16               # set MVPG flag
+	la	%r1,0f-.LPG1(%r13)	# set program check address
+	stg	%r1,__LC_PGM_NEW_PSW+8
+	sgr	%r0,%r0
+	lghi	%r1,0
+	lghi	%r2,0
+	mvpg	%r1,%r2 		# test MVPG instruction
+	oi	7(%r12),16		# set MVPG flag
 0:
 
 #
 # find out if the diag 0x44 works in 64 bit mode
 #
-	la     %r1,0f-.LPG1(%r13)	# set program check address
-	stg    %r1,__LC_PGM_NEW_PSW+8
-	diag   0,0,0x44			# test diag 0x44
-	oi     7(%r12),32		# set diag44 flag
-0:	
+	la	%r1,0f-.LPG1(%r13)	# set program check address
+	stg	%r1,__LC_PGM_NEW_PSW+8
+	diag	0,0,0x44		# test diag 0x44
+	oi	7(%r12),32		# set diag44 flag
+0:
 
 #
 # find out if we have the IDTE instruction
 #
-	la     %r1,0f-.LPG1(%r13)	# set program check address
-	stg    %r1,__LC_PGM_NEW_PSW+8
+	la	%r1,0f-.LPG1(%r13)	# set program check address
+	stg	%r1,__LC_PGM_NEW_PSW+8
 	.long	0xb2b10000		# store facility list
 	tm	0xc8,0x08		# check bit for clearing-by-ASCE
 	bno	0f-.LPG1(%r13)
@@ -263,45 +263,45 @@ startup_continue:
 	oi	6(%r12),2		# set MVCOS flag
 1:
 
-        lpswe .Lentry-.LPG1(13)         # jump to _stext in primary-space,
-                                        # virtual and never return ...
-        .align 16
-.Lentry:.quad  0x0000000180000000,_stext
-.Lctl:  .quad  0x04b50002               # cr0: various things
-        .quad  0                        # cr1: primary space segment table
-        .quad  .Lduct                   # cr2: dispatchable unit control table
-        .quad  0                        # cr3: instruction authorization
-        .quad  0                        # cr4: instruction authorization
-        .quad  0xffffffffffffffff       # cr5: primary-aste origin
-        .quad  0                        # cr6:  I/O interrupts
-        .quad  0                        # cr7:  secondary space segment table
-        .quad  0                        # cr8:  access registers translation
-        .quad  0                        # cr9:  tracing off
-        .quad  0                        # cr10: tracing off
-        .quad  0                        # cr11: tracing off
-        .quad  0                        # cr12: tracing off
-        .quad  0                        # cr13: home space segment table
-        .quad  0xc0000000               # cr14: machine check handling off
-        .quad  0                        # cr15: linkage stack operations
-.Lduct: .long 0,0,0,0,0,0,0,0
-	.long 0,0,0,0,0,0,0,0
-.Lpcmsk:.quad  0x0000000180000000
+	lpswe	.Lentry-.LPG1(13)	# jump to _stext in primary-space,
+					# virtual and never return ...
+	.align	16
+.Lentry:.quad	0x0000000180000000,_stext
+.Lctl:	.quad	0x04b50002		# cr0: various things
+	.quad	0			# cr1: primary space segment table
+	.quad	.Lduct			# cr2: dispatchable unit control table
+	.quad	0			# cr3: instruction authorization
+	.quad	0			# cr4: instruction authorization
+	.quad	0xffffffffffffffff	# cr5: primary-aste origin
+	.quad	0			# cr6:	I/O interrupts
+	.quad	0			# cr7:	secondary space segment table
+	.quad	0			# cr8:	access registers translation
+	.quad	0			# cr9:	tracing off
+	.quad	0			# cr10: tracing off
+	.quad	0			# cr11: tracing off
+	.quad	0			# cr12: tracing off
+	.quad	0			# cr13: home space segment table
+	.quad	0xc0000000		# cr14: machine check handling off
+	.quad	0			# cr15: linkage stack operations
+.Lduct: .long	0,0,0,0,0,0,0,0
+	.long	0,0,0,0,0,0,0,0
+.Lpcmsk:.quad	0x0000000180000000
 .L4malign:.quad 0xffffffffffc00000
-.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
-.Lnop:	.long  0x07000700
+.Lscan2g:.quad	0x80000000 + 0x20000 - 8	# 2GB + 128K - 8
+.Lnop:	.long	0x07000700
 .Lparmaddr:
 	.quad	PARMAREA
 
-	.globl ipl_schib
+	.globl	ipl_schib
 ipl_schib:
 	.rept 13
 	.long 0
 	.endr
 
-	.globl ipl_flags
+	.globl	ipl_flags
 ipl_flags:
-	.long 0
-	.globl ipl_devno
+	.long	0
+	.globl	ipl_devno
 ipl_devno:
 	.word 0
 
@@ -309,47 +309,47 @@ ipl_devno:
 .globl s390_readinfo_sccb
 s390_readinfo_sccb:
 .Lsccb:
-	.hword 0x1000			# length, one page
-	.byte 0x00,0x00,0x00
-	.byte 0x80			# variable response bit set
+	.hword	0x1000			# length, one page
+	.byte	0x00,0x00,0x00
+	.byte	0x80			# variable response bit set
 .Lsccbr:
-	.hword 0x00			# response code
+	.hword	0x00			# response code
 .Lscpincr1:
-	.hword 0x00
+	.hword	0x00
 .Lscpa1:
-	.byte 0x00
-	.fill 89,1,0
+	.byte	0x00
+	.fill	89,1,0
 .Lscpa2:
-	.int 0x00
+	.int	0x00
 .Lscpincr2:
-	.quad 0x00
-	.fill 3984,1,0
+	.quad	0x00
+	.fill	3984,1,0
 	.org	0x13000
 
 #ifdef CONFIG_SHARED_KERNEL
-	.org   0x100000
+	.org	0x100000
 #endif
-	
+
 #
 # startup-code, running in absolute addressing mode
 #
-        .globl _stext
-_stext:	basr  %r13,0                    # get base
+	.globl	_stext
+_stext:	basr	%r13,0			# get base
 .LPG3:
 # check control registers
-        stctg  %c0,%c15,0(%r15)
-	oi     6(%r15),0x40             # enable sigp emergency signal
-	oi     4(%r15),0x10             # switch on low address proctection
-        lctlg  %c0,%c15,0(%r15)
+	stctg	%c0,%c15,0(%r15)
+	oi	6(%r15),0x40		# enable sigp emergency signal
+	oi	4(%r15),0x10		# switch on low address proctection
+	lctlg	%c0,%c15,0(%r15)
 
-        lam    0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
-        brasl  %r14,start_kernel        # go to C code
+	lam	0,15,.Laregs-.LPG3(%r13)	# load acrs needed by uaccess
+	brasl	%r14,start_kernel	# go to C code
 #
 # We returned from start_kernel ?!? PANIK
 #
-        basr  %r13,0
-	lpswe .Ldw-.(%r13)           # load disabled wait psw
+	basr	%r13,0
+	lpswe	.Ldw-.(%r13)		# load disabled wait psw
 
-            .align 8
-.Ldw:       .quad  0x0002000180000000,0x0000000000000000
-.Laregs:    .long  0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
+	.align	8
+.Ldw:	.quad	0x0002000180000000,0x0000000000000000
+.Laregs:.long	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0