diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2019-08-23 11:47:28 +0200 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2019-09-19 10:43:32 +0200 |
commit | 7cca9b8b7c5bcc56d627851550840586a25aaa1b (patch) | |
tree | 822845323a4631d5b6d20a7b90924bf4814a274e /arch | |
parent | 1c62ed908363e249f3b0e1879d9d982e8431fb3f (diff) | |
download | linux-stable-7cca9b8b7c5bcc56d627851550840586a25aaa1b.tar.gz linux-stable-7cca9b8b7c5bcc56d627851550840586a25aaa1b.tar.bz2 linux-stable-7cca9b8b7c5bcc56d627851550840586a25aaa1b.zip |
microblaze: Switch to standard restart handler
The microblaze uses the legacy APIs to dig out a GPIO pin
defined in the root of the device tree to issue a hard
reset of the platform.
Asserting a hard reset should be done using the standard
DT-enabled and fully GPIO descriptor aware driver in
drivers/power/reset/gpio-restart.c using the bindings
from Documentation/devicetree/bindings/power/reset/gpio-restart.txt
To achieve this, first make sure microblaze makes use of
the standard kernel restart path utilizing do_kernel_restart()
from <linux/reboot.h>. Put in some grace time and an
emergency print if the restart does not properly assert.
As this is basic platform functionality we patch the DTS
file and defconfig in one go for a lockstep change.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[ Michal: Move machine_restart back to reset.c ]
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/microblaze/boot/dts/system.dts | 16 | ||||
-rw-r--r-- | arch/microblaze/configs/mmu_defconfig | 2 | ||||
-rw-r--r-- | arch/microblaze/configs/nommu_defconfig | 2 | ||||
-rw-r--r-- | arch/microblaze/kernel/reset.c | 87 |
4 files changed, 30 insertions, 77 deletions
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts index 5a8a9d090c37..5b236527176e 100644 --- a/arch/microblaze/boot/dts/system.dts +++ b/arch/microblaze/boot/dts/system.dts @@ -18,7 +18,6 @@ #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,microblaze"; - hard-reset-gpios = <&LEDs_8Bit 2 1>; model = "testing"; DDR2_SDRAM: memory@90000000 { device_type = "memory"; @@ -281,6 +280,21 @@ gpios = <&LEDs_8Bit 7 1>; }; } ; + + gpio-restart { + compatible = "gpio-restart"; + /* + * FIXME: is this active low or active high? + * the current flag (1) indicates active low. + * delay measures are templates, should be adjusted + * to datasheet or trial-and-error with real hardware. + */ + gpios = <&LEDs_8Bit 2 1>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + }; + RS232_Uart_1: serial@84000000 { clock-frequency = <125000000>; compatible = "xlnx,xps-uartlite-1.00.a"; diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index b83aff1e86cd..654edfdc7867 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -60,6 +60,8 @@ CONFIG_SPI_XILINX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_XILINX=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO_RESTART=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index dc102eb65fca..377de39ccb8c 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -62,6 +62,8 @@ CONFIG_SPI_XILINX=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_XILINX=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO_RESTART=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index fcbe1daf6316..5f4722908164 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -8,83 +8,9 @@ */ #include <linux/init.h> +#include <linux/delay.h> #include <linux/of_platform.h> - -/* Trigger specific functions */ -#ifdef CONFIG_GPIOLIB - -#include <linux/of_gpio.h> - -static int handle; /* reset pin handle */ -static unsigned int reset_val; - -static int of_platform_reset_gpio_probe(void) -{ - int ret; - handle = of_get_named_gpio(of_find_node_by_path("/"), - "hard-reset-gpios", 0); - - if (!gpio_is_valid(handle)) { - pr_info("Skipping unavailable RESET gpio %d (%s)\n", - handle, "reset"); - return -ENODEV; - } - - ret = gpio_request(handle, "reset"); - if (ret < 0) { - pr_info("GPIO pin is already allocated\n"); - return ret; - } - - /* get current setup value */ - reset_val = gpio_get_value(handle); - /* FIXME maybe worth to perform any action */ - pr_debug("Reset: Gpio output state: 0x%x\n", reset_val); - - /* Setup GPIO as output */ - ret = gpio_direction_output(handle, 0); - if (ret < 0) - goto err; - - /* Setup output direction */ - gpio_set_value(handle, 0); - - pr_info("RESET: Registered gpio device: %d, current val: %d\n", - handle, reset_val); - return 0; -err: - gpio_free(handle); - return ret; -} -device_initcall(of_platform_reset_gpio_probe); - - -static void gpio_system_reset(void) -{ - if (gpio_is_valid(handle)) - gpio_set_value(handle, 1 - reset_val); - else - pr_notice("Reset GPIO unavailable - halting!\n"); -} -#else -static void gpio_system_reset(void) -{ - pr_notice("No reset GPIO present - halting!\n"); -} - -void of_platform_reset_gpio_probe(void) -{ - return; -} -#endif - -void machine_restart(char *cmd) -{ - pr_notice("Machine restart...\n"); - gpio_system_reset(); - while (1) - ; -} +#include <linux/reboot.h> void machine_shutdown(void) { @@ -106,3 +32,12 @@ void machine_power_off(void) while (1) ; } + +void machine_restart(char *cmd) +{ + do_kernel_restart(cmd); + /* Give the restart hook 1 s to take us down */ + mdelay(1000); + pr_emerg("Reboot failed -- System halted\n"); + while (1); +} |