[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 285 insertions, 0 deletions

diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
new file mode 100644
index 000000000000..7dd6ea3a21e4
--- /dev/null
+++ b/drivers/ata/pata_triflex.c
@@ -0,0 +1,285 @@
+/*
+ * pata_triflex.c 	- Compaq PATA for new ATA layer
+ *			  (C) 2005 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ * based upon
+ *
+ * triflex.c
+ *
+ * IDE Chipset driver for the Compaq TriFlex IDE controller.
+ *
+ * Known to work with the Compaq Workstation 5x00 series.
+ *
+ * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
+ * Author: Torben Mathiasen <torben.mathiasen@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Loosely based on the piix & svwks drivers.
+ *
+ * Documentation:
+ *	Not publically available.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_triflex"
+#define DRV_VERSION "0.2.5"
+
+/**
+ *	triflex_probe_init		-	probe begin
+ *	@ap: ATA port
+ *
+ *	Set up cable type and use generic probe init
+ */
+
+static int triflex_probe_init(struct ata_port *ap)
+{
+	static const struct pci_bits triflex_enable_bits[] = {
+		{ 0x80, 1, 0x01, 0x01 },
+		{ 0x80, 1, 0x02, 0x02 }
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	
+	if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) {
+		ata_port_disable(ap);
+		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		return 0;
+	}
+	ap->cbl = ATA_CBL_PATA40;
+	return ata_std_prereset(ap);
+}
+
+
+
+static void triflex_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, triflex_probe_init, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ *	triflex_load_timing		-	timing configuration
+ *	@ap: ATA interface
+ *	@adev: Device on the bus
+ *	@speed: speed to configure
+ *
+ *	The Triflex has one set of timings per device per channel. This
+ *	means we must do some switching. As the PIO and DMA timings don't
+ *	match we have to do some reloading unlike PIIX devices where tuning
+ *	tricks can avoid it.
+ */
+
+static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 timing = 0;
+	u32 triflex_timing, old_triflex_timing;
+	int channel_offset = ap->port_no ? 0x74: 0x70;
+	unsigned int is_slave	= (adev->devno != 0);
+
+
+	pci_read_config_dword(pdev, channel_offset, &old_triflex_timing);
+	triflex_timing = old_triflex_timing;
+
+	switch(speed)
+	{
+		case XFER_MW_DMA_2:
+			timing = 0x0103;break;
+		case XFER_MW_DMA_1:
+			timing = 0x0203;break;
+		case XFER_MW_DMA_0:
+			timing = 0x0808;break;
+		case XFER_SW_DMA_2:
+		case XFER_SW_DMA_1:
+		case XFER_SW_DMA_0:
+			timing = 0x0F0F;break;
+		case XFER_PIO_4:
+			timing = 0x0202;break;
+		case XFER_PIO_3:
+			timing = 0x0204;break;
+		case XFER_PIO_2:
+			timing = 0x0404;break;
+		case XFER_PIO_1:
+			timing = 0x0508;break;
+		case XFER_PIO_0:
+			timing = 0x0808;break;
+		default:
+			BUG();
+	}
+	triflex_timing &= ~ (0xFFFF << (16 * is_slave));
+	triflex_timing |= (timing << (16 * is_slave));
+
+	if (triflex_timing != old_triflex_timing)
+		pci_write_config_dword(pdev, channel_offset, triflex_timing);
+}
+
+/**
+ *	triflex_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Use the timing loader to set up the PIO mode. We have to do this
+ *	because DMA start/stop will only be called once DMA occurs. If there
+ *	has been no DMA then the PIO timings are still needed.
+ */
+static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	triflex_load_timing(ap, adev, adev->pio_mode);
+}
+
+/**
+ *	triflex_dma_start	-	DMA start callback
+ *	@qc: Command in progress
+ *
+ *	Usually drivers set the DMA timing at the point the set_dmamode call
+ *	is made. Triflex however requires we load new timings on the
+ *	transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc).
+ *	We load the DMA timings just before starting DMA and then restore
+ *	the PIO timing when the DMA is finished.
+ */
+
+static void triflex_bmdma_start(struct ata_queued_cmd *qc)
+{
+	triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode);
+	ata_bmdma_start(qc);
+}
+
+/**
+ *	triflex_dma_stop	-	DMA stop callback
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	We loaded new timings in dma_start, as a result we need to restore
+ *	the PIO timings in dma_stop so that the next command issue gets the
+ *	right clock values.
+ */
+
+static void triflex_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	ata_bmdma_stop(qc);
+	triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode);
+}
+
+static struct scsi_host_template triflex_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations triflex_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= triflex_set_piomode,
+	.mode_filter	= ata_pci_default_filter,
+
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= triflex_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= triflex_bmdma_start,
+	.bmdma_stop	= triflex_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info = {
+		.sht = &triflex_sht,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.port_ops = &triflex_port_ops
+	};
+	static struct ata_port_info *port_info[2] = { &info, &info };
+	static int printed_version;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
+
+	return ata_pci_init_one(dev, port_info, 2);
+}
+
+static const struct pci_device_id triflex[] = {
+	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+				  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0, },
+};
+
+static struct pci_driver triflex_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= triflex,
+	.probe 		= triflex_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init triflex_init(void)
+{
+	return pci_register_driver(&triflex_pci_driver);
+}
+
+
+static void __exit triflex_exit(void)
+{
+	pci_unregister_driver(&triflex_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Compaq Triflex");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, triflex);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(triflex_init);
+module_exit(triflex_exit);