fpga: dfl: add basic support for DFHv1

Version 1 of the Device Feature Header (DFH) definition adds
functionality to the Device Feature List (DFL) bus.

A DFHv1 header may have one or more parameter blocks that
further describes the HW to SW. Add support to the DFL bus
to parse the MSI-X parameter.

The location of a feature's register set is explicitly
described in DFHv1 and can be relative to the base of the DFHv1
or an absolute address. Parse the location and pass the information
to DFL driver.

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230115151447.1353428-4-matthew.gerlach@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 194 insertions, 51 deletions

diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index b9aae85ba930..0a4227bc9462 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -13,6 +13,7 @@
 #include <linux/dfl.h>
 #include <linux/fpga-dfl.h>
 #include <linux/module.h>
+#include <linux/overflow.h>
 #include <linux/uaccess.h>
 
 #include "dfl.h"
@@ -342,6 +343,8 @@ static void release_dfl_dev(struct device *dev)
 	if (ddev->mmio_res.parent)
 		release_resource(&ddev->mmio_res);
 
+	kfree(ddev->params);
+
 	ida_free(&dfl_device_ida, ddev->id);
 	kfree(ddev->irqs);
 	kfree(ddev);
@@ -380,7 +383,16 @@ dfl_dev_add(struct dfl_feature_platform_data *pdata,
 	ddev->type = feature_dev_id_type(pdev);
 	ddev->feature_id = feature->id;
 	ddev->revision = feature->revision;
+	ddev->dfh_version = feature->dfh_version;
 	ddev->cdev = pdata->dfl_cdev;
+	if (feature->param_size) {
+		ddev->params = kmemdup(feature->params, feature->param_size, GFP_KERNEL);
+		if (!ddev->params) {
+			ret = -ENOMEM;
+			goto put_dev;
+		}
+		ddev->param_size = feature->param_size;
+	}
 
 	/* add mmio resource */
 	parent_res = &pdev->resource[feature->resource_index];
@@ -708,20 +720,27 @@ struct build_feature_devs_info {
  * struct dfl_feature_info - sub feature info collected during feature dev build
  *
  * @fid: id of this sub feature.
+ * @revision: revision of this sub feature
+ * @dfh_version: version of Device Feature Header (DFH)
  * @mmio_res: mmio resource of this sub feature.
  * @ioaddr: mapped base address of mmio resource.
  * @node: node in sub_features linked list.
  * @irq_base: start of irq index in this sub feature.
  * @nr_irqs: number of irqs of this sub feature.
+ * @param_size: size DFH parameters.
+ * @params: DFH parameter data.
  */
 struct dfl_feature_info {
 	u16 fid;
 	u8 revision;
+	u8 dfh_version;
 	struct resource mmio_res;
 	void __iomem *ioaddr;
 	struct list_head node;
 	unsigned int irq_base;
 	unsigned int nr_irqs;
+	unsigned int param_size;
+	u64 params[];
 };
 
 static void dfl_fpga_cdev_add_port_dev(struct dfl_fpga_cdev *cdev,
@@ -797,7 +816,17 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
 		feature->dev = fdev;
 		feature->id = finfo->fid;
 		feature->revision = finfo->revision;
+		feature->dfh_version = finfo->dfh_version;
 
+		if (finfo->param_size) {
+			feature->params = devm_kmemdup(binfo->dev,
+						       finfo->params, finfo->param_size,
+						       GFP_KERNEL);
+			if (!feature->params)
+				return -ENOMEM;
+
+			feature->param_size = finfo->param_size;
+		}
 		/*
 		 * the FIU header feature has some fundamental functions (sriov
 		 * set, port enable/disable) needed for the dfl bus device and
@@ -934,56 +963,115 @@ static u16 feature_id(u64 value)
 	return 0;
 }
 
+static u64 *find_param(u64 *params, resource_size_t max, int param_id)
+{
+	u64 *end = params + max / sizeof(u64);
+	u64 v, next;
+
+	while (params < end) {
+		v = *params;
+		if (param_id == FIELD_GET(DFHv1_PARAM_HDR_ID, v))
+			return params;
+
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			break;
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		params += next;
+	}
+
+	return NULL;
+}
+
+/**
+ * dfh_find_param() - find parameter block for the given parameter id
+ * @dfl_dev: dfl device
+ * @param_id: id of dfl parameter
+ * @psize: destination to store size of parameter data in bytes
+ *
+ * Return: pointer to start of parameter data, PTR_ERR otherwise.
+ */
+void *dfh_find_param(struct dfl_device *dfl_dev, int param_id, size_t *psize)
+{
+	u64 *phdr = find_param(dfl_dev->params, dfl_dev->param_size, param_id);
+
+	if (!phdr)
+		return ERR_PTR(-ENOENT);
+
+	if (psize)
+		*psize = (FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, *phdr) - 1) * sizeof(u64);
+
+	return phdr + 1;
+}
+EXPORT_SYMBOL_GPL(dfh_find_param);
+
 static int parse_feature_irqs(struct build_feature_devs_info *binfo,
-			      resource_size_t ofst, u16 fid,
-			      unsigned int *irq_base, unsigned int *nr_irqs)
+			      resource_size_t ofst, struct dfl_feature_info *finfo)
 {
 	void __iomem *base = binfo->ioaddr + ofst;
 	unsigned int i, ibase, inr = 0;
+	void *params = finfo->params;
 	enum dfl_id_type type;
+	u16 fid = finfo->fid;
 	int virq;
+	u64 *p;
 	u64 v;
 
-	type = feature_dev_id_type(binfo->feature_dev);
+	switch (finfo->dfh_version) {
+	case 0:
+		/*
+		 * DFHv0 only provides MMIO resource information for each feature
+		 * in the DFL header.  There is no generic interrupt information.
+		 * Instead, features with interrupt functionality provide
+		 * the information in feature specific registers.
+		 */
+		type = feature_dev_id_type(binfo->feature_dev);
+		if (type == PORT_ID) {
+			switch (fid) {
+			case PORT_FEATURE_ID_UINT:
+				v = readq(base + PORT_UINT_CAP);
+				ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+				inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+				break;
+			case PORT_FEATURE_ID_ERROR:
+				v = readq(base + PORT_ERROR_CAP);
+				ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		} else if (type == FME_ID) {
+			switch (fid) {
+			case FME_FEATURE_ID_GLOBAL_ERR:
+				v = readq(base + FME_ERROR_CAP);
+				ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+				inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+				break;
+			}
+		}
+		break;
 
-	/*
-	 * Ideally DFL framework should only read info from DFL header, but
-	 * current version DFL only provides mmio resources information for
-	 * each feature in DFL Header, no field for interrupt resources.
-	 * Interrupt resource information is provided by specific mmio
-	 * registers of each private feature which supports interrupt. So in
-	 * order to parse and assign irq resources, DFL framework has to look
-	 * into specific capability registers of these private features.
-	 *
-	 * Once future DFL version supports generic interrupt resource
-	 * information in common DFL headers, the generic interrupt parsing
-	 * code will be added. But in order to be compatible to old version
-	 * DFL, the driver may still fall back to these quirks.
-	 */
-	if (type == PORT_ID) {
-		switch (fid) {
-		case PORT_FEATURE_ID_UINT:
-			v = readq(base + PORT_UINT_CAP);
-			ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
-			inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
-			break;
-		case PORT_FEATURE_ID_ERROR:
-			v = readq(base + PORT_ERROR_CAP);
-			ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+	case 1:
+		/*
+		 * DFHv1 provides interrupt resource information in DFHv1
+		 * parameter blocks.
+		 */
+		p = find_param(params, finfo->param_size, DFHv1_PARAM_ID_MSI_X);
+		if (!p)
 			break;
-		}
-	} else if (type == FME_ID) {
-		if (fid == FME_FEATURE_ID_GLOBAL_ERR) {
-			v = readq(base + FME_ERROR_CAP);
-			ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
-			inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
-		}
+
+		p++;
+		ibase = FIELD_GET(DFHv1_PARAM_MSI_X_STARTV, *p);
+		inr = FIELD_GET(DFHv1_PARAM_MSI_X_NUMV, *p);
+		break;
+
+	default:
+		dev_warn(binfo->dev, "unexpected DFH version %d\n", finfo->dfh_version);
+		break;
 	}
 
 	if (!inr) {
-		*irq_base = 0;
-		*nr_irqs = 0;
+		finfo->irq_base = 0;
+		finfo->nr_irqs = 0;
 		return 0;
 	}
 
@@ -1006,12 +1094,37 @@ static int parse_feature_irqs(struct build_feature_devs_info *binfo,
 		}
 	}
 
-	*irq_base = ibase;
-	*nr_irqs = inr;
+	finfo->irq_base = ibase;
+	finfo->nr_irqs = inr;
 
 	return 0;
 }
 
+static int dfh_get_param_size(void __iomem *dfh_base, resource_size_t max)
+{
+	int size = 0;
+	u64 v, next;
+
+	if (!FIELD_GET(DFHv1_CSR_SIZE_GRP_HAS_PARAMS,
+		       readq(dfh_base + DFHv1_CSR_SIZE_GRP)))
+		return 0;
+
+	while (size + DFHv1_PARAM_HDR < max) {
+		v = readq(dfh_base + DFHv1_PARAM_HDR + size);
+
+		next = FIELD_GET(DFHv1_PARAM_HDR_NEXT_OFFSET, v);
+		if (!next)
+			return -EINVAL;
+
+		size += next * sizeof(u64);
+
+		if (FIELD_GET(DFHv1_PARAM_HDR_NEXT_EOP, v))
+			return size;
+	}
+
+	return -ENOENT;
+}
+
 /*
  * when create sub feature instances, for private features, it doesn't need
  * to provide resource size and feature id as they could be read from DFH
@@ -1023,39 +1136,69 @@ static int
 create_feature_instance(struct build_feature_devs_info *binfo,
 			resource_size_t ofst, resource_size_t size, u16 fid)
 {
-	unsigned int irq_base, nr_irqs;
 	struct dfl_feature_info *finfo;
+	resource_size_t start, end;
+	int dfh_psize = 0;
 	u8 revision = 0;
+	u64 v, addr_off;
+	u8 dfh_ver = 0;
 	int ret;
-	u64 v;
 
 	if (fid != FEATURE_ID_AFU) {
 		v = readq(binfo->ioaddr + ofst);
 		revision = FIELD_GET(DFH_REVISION, v);
-
+		dfh_ver = FIELD_GET(DFH_VERSION, v);
 		/* read feature size and id if inputs are invalid */
 		size = size ? size : feature_size(v);
 		fid = fid ? fid : feature_id(v);
+		if (dfh_ver == 1) {
+			dfh_psize = dfh_get_param_size(binfo->ioaddr + ofst, size);
+			if (dfh_psize < 0) {
+				dev_err(binfo->dev,
+					"failed to read size of DFHv1 parameters %d\n",
+					dfh_psize);
+				return dfh_psize;
+			}
+			dev_dbg(binfo->dev, "dfhv1_psize %d\n", dfh_psize);
+		}
 	}
 
 	if (binfo->len - ofst < size)
 		return -EINVAL;
 
-	ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
-	if (ret)
-		return ret;
-
-	finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
+	finfo = kzalloc(struct_size(finfo, params, dfh_psize / sizeof(u64)), GFP_KERNEL);
 	if (!finfo)
 		return -ENOMEM;
 
+	memcpy_fromio(finfo->params, binfo->ioaddr + ofst + DFHv1_PARAM_HDR, dfh_psize);
+	finfo->param_size = dfh_psize;
+
 	finfo->fid = fid;
 	finfo->revision = revision;
-	finfo->mmio_res.start = binfo->start + ofst;
-	finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
+	finfo->dfh_version = dfh_ver;
+	if (dfh_ver == 1) {
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_ADDR);
+		addr_off = FIELD_GET(DFHv1_CSR_ADDR_MASK, v);
+		if (FIELD_GET(DFHv1_CSR_ADDR_REL, v))
+			start = addr_off << 1;
+		else
+			start = binfo->start + ofst + addr_off;
+
+		v = readq(binfo->ioaddr + ofst + DFHv1_CSR_SIZE_GRP);
+		end = start + FIELD_GET(DFHv1_CSR_SIZE_GRP_SIZE, v) - 1;
+	} else {
+		start = binfo->start + ofst;
+		end = start + size - 1;
+	}
 	finfo->mmio_res.flags = IORESOURCE_MEM;
-	finfo->irq_base = irq_base;
-	finfo->nr_irqs = nr_irqs;
+	finfo->mmio_res.start = start;
+	finfo->mmio_res.end = end;
+
+	ret = parse_feature_irqs(binfo, ofst, finfo);
+	if (ret) {
+		kfree(finfo);
+		return ret;
+	}
 
 	list_add_tail(&finfo->node, &binfo->sub_features);
 	binfo->feature_num++;