drm/arm: Add support for Mali Display Processors

Add support for the new family of Display Processors from ARM Ltd.
This commit adds basic support for Mali DP500, DP550 and DP650
parts, with only the display engine being supported at the moment.

Cc: David Brown <David.Brown@arm.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

1 files changed, 172 insertions, 0 deletions

diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h
new file mode 100644
index 000000000000..73fecb38f955
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_regs.h
@@ -0,0 +1,172 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 registers definition.
+ */
+
+#ifndef __MALIDP_REGS_H__
+#define __MALIDP_REGS_H__
+
+/*
+ * abbreviations used:
+ *    - DC - display core (general settings)
+ *    - DE - display engine
+ *    - SE - scaling engine
+ */
+
+/* interrupt bit masks */
+#define MALIDP_DE_IRQ_UNDERRUN			(1 << 0)
+
+#define MALIDP500_DE_IRQ_AXI_ERR		(1 << 4)
+#define MALIDP500_DE_IRQ_VSYNC			(1 << 5)
+#define MALIDP500_DE_IRQ_PROG_LINE		(1 << 6)
+#define MALIDP500_DE_IRQ_SATURATION		(1 << 7)
+#define MALIDP500_DE_IRQ_CONF_VALID		(1 << 8)
+#define MALIDP500_DE_IRQ_CONF_MODE		(1 << 11)
+#define MALIDP500_DE_IRQ_CONF_ACTIVE		(1 << 17)
+#define MALIDP500_DE_IRQ_PM_ACTIVE		(1 << 18)
+#define MALIDP500_DE_IRQ_TESTMODE_ACTIVE	(1 << 19)
+#define MALIDP500_DE_IRQ_FORCE_BLNK_ACTIVE	(1 << 24)
+#define MALIDP500_DE_IRQ_AXI_BUSY		(1 << 28)
+#define MALIDP500_DE_IRQ_GLOBAL			(1 << 31)
+#define MALIDP500_SE_IRQ_CONF_MODE		(1 << 0)
+#define MALIDP500_SE_IRQ_CONF_VALID		(1 << 4)
+#define MALIDP500_SE_IRQ_INIT_BUSY		(1 << 5)
+#define MALIDP500_SE_IRQ_AXI_ERROR		(1 << 8)
+#define MALIDP500_SE_IRQ_OVERRUN		(1 << 9)
+#define MALIDP500_SE_IRQ_PROG_LINE1		(1 << 12)
+#define MALIDP500_SE_IRQ_PROG_LINE2		(1 << 13)
+#define MALIDP500_SE_IRQ_CONF_ACTIVE		(1 << 17)
+#define MALIDP500_SE_IRQ_PM_ACTIVE		(1 << 18)
+#define MALIDP500_SE_IRQ_AXI_BUSY		(1 << 28)
+#define MALIDP500_SE_IRQ_GLOBAL			(1 << 31)
+
+#define MALIDP550_DE_IRQ_SATURATION		(1 << 8)
+#define MALIDP550_DE_IRQ_VSYNC			(1 << 12)
+#define MALIDP550_DE_IRQ_PROG_LINE		(1 << 13)
+#define MALIDP550_DE_IRQ_AXI_ERR		(1 << 16)
+#define MALIDP550_SE_IRQ_EOW			(1 << 0)
+#define MALIDP550_SE_IRQ_AXI_ERR		(1 << 16)
+#define MALIDP550_DC_IRQ_CONF_VALID		(1 << 0)
+#define MALIDP550_DC_IRQ_CONF_MODE		(1 << 4)
+#define MALIDP550_DC_IRQ_CONF_ACTIVE		(1 << 16)
+#define MALIDP550_DC_IRQ_DE			(1 << 20)
+#define MALIDP550_DC_IRQ_SE			(1 << 24)
+
+#define MALIDP650_DE_IRQ_DRIFT			(1 << 4)
+
+/* bit masks that are common between products */
+#define   MALIDP_CFG_VALID		(1 << 0)
+#define   MALIDP_DISP_FUNC_ILACED	(1 << 8)
+
+/* register offsets for IRQ management */
+#define MALIDP_REG_STATUS		0x00000
+#define MALIDP_REG_SETIRQ		0x00004
+#define MALIDP_REG_MASKIRQ		0x00008
+#define MALIDP_REG_CLEARIRQ		0x0000c
+
+/* register offsets */
+#define MALIDP_DE_CORE_ID		0x00018
+#define MALIDP_DE_DISPLAY_FUNC		0x00020
+
+/* these offsets are relative to MALIDP5x0_TIMINGS_BASE */
+#define MALIDP_DE_H_TIMINGS		0x0
+#define MALIDP_DE_V_TIMINGS		0x4
+#define MALIDP_DE_SYNC_WIDTH		0x8
+#define MALIDP_DE_HV_ACTIVE		0xc
+
+/* macros to set values into registers */
+#define MALIDP_DE_H_FRONTPORCH(x)	(((x) & 0xfff) << 0)
+#define MALIDP_DE_H_BACKPORCH(x)	(((x) & 0x3ff) << 16)
+#define MALIDP500_DE_V_FRONTPORCH(x)	(((x) & 0xff) << 0)
+#define MALIDP550_DE_V_FRONTPORCH(x)	(((x) & 0xfff) << 0)
+#define MALIDP_DE_V_BACKPORCH(x)	(((x) & 0xff) << 16)
+#define MALIDP_DE_H_SYNCWIDTH(x)	(((x) & 0x3ff) << 0)
+#define MALIDP_DE_V_SYNCWIDTH(x)	(((x) & 0xff) << 16)
+#define MALIDP_DE_H_ACTIVE(x)		(((x) & 0x1fff) << 0)
+#define MALIDP_DE_V_ACTIVE(x)		(((x) & 0x1fff) << 16)
+
+/* register offsets and bits specific to DP500 */
+#define MALIDP500_DC_BASE		0x00000
+#define MALIDP500_DC_CONTROL		0x0000c
+#define   MALIDP500_DC_CONFIG_REQ	(1 << 17)
+#define   MALIDP500_HSYNCPOL		(1 << 20)
+#define   MALIDP500_VSYNCPOL		(1 << 21)
+#define   MALIDP500_DC_CLEAR_MASK	0x300fff
+#define MALIDP500_DE_LINE_COUNTER	0x00010
+#define MALIDP500_DE_AXI_CONTROL	0x00014
+#define MALIDP500_DE_SECURE_CTRL	0x0001c
+#define MALIDP500_DE_CHROMA_KEY		0x00024
+#define MALIDP500_TIMINGS_BASE		0x00028
+
+#define MALIDP500_CONFIG_3D		0x00038
+#define MALIDP500_BGND_COLOR		0x0003c
+#define MALIDP500_OUTPUT_DEPTH		0x00044
+#define MALIDP500_YUV_RGB_COEF		0x00048
+#define MALIDP500_COLOR_ADJ_COEF	0x00078
+#define MALIDP500_COEF_TABLE_ADDR	0x000a8
+#define MALIDP500_COEF_TABLE_DATA	0x000ac
+#define MALIDP500_DE_LV_BASE		0x00100
+#define MALIDP500_DE_LV_PTR_BASE	0x00124
+#define MALIDP500_DE_LG1_BASE		0x00200
+#define MALIDP500_DE_LG1_PTR_BASE	0x0021c
+#define MALIDP500_DE_LG2_BASE		0x00300
+#define MALIDP500_DE_LG2_PTR_BASE	0x0031c
+#define MALIDP500_SE_BASE		0x00c00
+#define MALIDP500_SE_PTR_BASE		0x00e0c
+#define MALIDP500_DC_IRQ_BASE		0x00f00
+#define MALIDP500_CONFIG_VALID		0x00f00
+#define MALIDP500_CONFIG_ID		0x00fd4
+
+/* register offsets and bits specific to DP550/DP650 */
+#define MALIDP550_DE_CONTROL		0x00010
+#define MALIDP550_DE_LINE_COUNTER	0x00014
+#define MALIDP550_DE_AXI_CONTROL	0x00018
+#define MALIDP550_DE_QOS		0x0001c
+#define MALIDP550_TIMINGS_BASE		0x00030
+#define MALIDP550_HSYNCPOL		(1 << 12)
+#define MALIDP550_VSYNCPOL		(1 << 28)
+
+#define MALIDP550_DE_DISP_SIDEBAND	0x00040
+#define MALIDP550_DE_BGND_COLOR		0x00044
+#define MALIDP550_DE_OUTPUT_DEPTH	0x0004c
+#define MALIDP550_DE_COLOR_COEF		0x00050
+#define MALIDP550_DE_COEF_TABLE_ADDR	0x00080
+#define MALIDP550_DE_COEF_TABLE_DATA	0x00084
+#define MALIDP550_DE_LV1_BASE		0x00100
+#define MALIDP550_DE_LV1_PTR_BASE	0x00124
+#define MALIDP550_DE_LV2_BASE		0x00200
+#define MALIDP550_DE_LV2_PTR_BASE	0x00224
+#define MALIDP550_DE_LG_BASE		0x00300
+#define MALIDP550_DE_LG_PTR_BASE	0x0031c
+#define MALIDP550_DE_LS_BASE		0x00400
+#define MALIDP550_DE_LS_PTR_BASE	0x0042c
+#define MALIDP550_DE_PERF_BASE		0x00500
+#define MALIDP550_SE_BASE		0x08000
+#define MALIDP550_DC_BASE		0x0c000
+#define MALIDP550_DC_CONTROL		0x0c010
+#define   MALIDP550_DC_CONFIG_REQ	(1 << 16)
+#define MALIDP550_CONFIG_VALID		0x0c014
+#define MALIDP550_CONFIG_ID		0x0ffd4
+
+/*
+ * Starting with DP550 the register map blocks has been standardised to the
+ * following layout:
+ *
+ *   Offset            Block registers
+ *  0x00000            Display Engine
+ *  0x08000            Scaling Engine
+ *  0x0c000            Display Core
+ *  0x10000            Secure control
+ *
+ * The old DP500 IP mixes some DC with the DE registers, hence the need
+ * for a mapping structure.
+ */
+
+#endif /* __MALIDP_REGS_H__ */