drm/i915: Kill sink_crc for good

It was originally introduced following the VESA spec in order to validate PSR.

However we found so many issues around sink_crc that instead of helping PSR
development it only brought another layer of trouble to the table.

So, sink_crc has been a black whole for us in question of time, effort and hope.

First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behind sink_crc is
already compromised.

For a while we had hope on the aux-mutex could workaround this problem on SKL+
platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.

Also, nor source, nor sink designed and implemented the sink_crc to be used like
we are trying to use here.

Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.

So, for all the time we lost on trying to ducktape all these different issues
I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for this sink_crc, but at least more
reliable.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com

1 files changed, 0 insertions, 81 deletions

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 54509e44a856..b3aefd623557 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2767,86 +2767,6 @@ DEFINE_SIMPLE_ATTRIBUTE(i915_edp_psr_debug_fops,
 			i915_edp_psr_debug_get, i915_edp_psr_debug_set,
 			"%llu\n");
 
-static int i915_sink_crc(struct seq_file *m, void *data)
-{
-	struct drm_i915_private *dev_priv = node_to_i915(m->private);
-	struct drm_device *dev = &dev_priv->drm;
-	struct intel_connector *connector;
-	struct drm_connector_list_iter conn_iter;
-	struct intel_dp *intel_dp = NULL;
-	struct drm_modeset_acquire_ctx ctx;
-	int ret;
-	u8 crc[6];
-
-	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
-
-	drm_connector_list_iter_begin(dev, &conn_iter);
-
-	for_each_intel_connector_iter(connector, &conn_iter) {
-		struct drm_crtc *crtc;
-		struct drm_connector_state *state;
-		struct intel_crtc_state *crtc_state;
-
-		if (connector->base.connector_type != DRM_MODE_CONNECTOR_eDP)
-			continue;
-
-retry:
-		ret = drm_modeset_lock(&dev->mode_config.connection_mutex, &ctx);
-		if (ret)
-			goto err;
-
-		state = connector->base.state;
-		if (!state->best_encoder)
-			continue;
-
-		crtc = state->crtc;
-		ret = drm_modeset_lock(&crtc->mutex, &ctx);
-		if (ret)
-			goto err;
-
-		crtc_state = to_intel_crtc_state(crtc->state);
-		if (!crtc_state->base.active)
-			continue;
-
-		/*
-		 * We need to wait for all crtc updates to complete, to make
-		 * sure any pending modesets and plane updates are completed.
-		 */
-		if (crtc_state->base.commit) {
-			ret = wait_for_completion_interruptible(&crtc_state->base.commit->hw_done);
-
-			if (ret)
-				goto err;
-		}
-
-		intel_dp = enc_to_intel_dp(state->best_encoder);
-
-		ret = intel_dp_sink_crc(intel_dp, crtc_state, crc);
-		if (ret)
-			goto err;
-
-		seq_printf(m, "%02x%02x%02x%02x%02x%02x\n",
-			   crc[0], crc[1], crc[2],
-			   crc[3], crc[4], crc[5]);
-		goto out;
-
-err:
-		if (ret == -EDEADLK) {
-			ret = drm_modeset_backoff(&ctx);
-			if (!ret)
-				goto retry;
-		}
-		goto out;
-	}
-	ret = -ENODEV;
-out:
-	drm_connector_list_iter_end(&conn_iter);
-	drm_modeset_drop_locks(&ctx);
-	drm_modeset_acquire_fini(&ctx);
-
-	return ret;
-}
-
 static int i915_energy_uJ(struct seq_file *m, void *data)
 {
 	struct drm_i915_private *dev_priv = node_to_i915(m->private);
@@ -4792,7 +4712,6 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_ppgtt_info", i915_ppgtt_info, 0},
 	{"i915_llc", i915_llc, 0},
 	{"i915_edp_psr_status", i915_edp_psr_status, 0},
-	{"i915_sink_crc_eDP1", i915_sink_crc, 0},
 	{"i915_energy_uJ", i915_energy_uJ, 0},
 	{"i915_runtime_pm_status", i915_runtime_pm_status, 0},
 	{"i915_power_domain_info", i915_power_domain_info, 0},