drm/i915: Reorganize plane register writes to make them more atomic

Some observations about the plane registers:
- the control register will self-arm if the plane is not already
  enabled, thus we want to write it as close to (or ideally after)
  the surface register
- tileoff/linoff/offset/aux_offset are self-arming as well so we want
  them close to the surface register as well
- color keying registers we maybe self arming before SKL. Not 100%
  sure but we can try to keep them near to the surface register
  as well
- chv pipe b csc register are double buffered but self arming so
  moving them down a bit
- the rest should be mostly armed by the surface register so we can
  safely write them first, and to just for some consistency let's try
  to follow keep them in order based on the register offset

None of this will have any effect of course unless the vblank evasion
fails (which it still does sometimes). Another potential future benefit
might be pulling the non-self armings registers outside the vblank
evasion since they won't latch until the arming register has been
written. This would make the critical section a bit lighter and thus
less likely to exceed the deadline.

v2: Rebase due to input CSC
v3: Swap LINOFF/TILEOFF and KEYMSK/KEYMAX to actually follow
    the last rule above (Matt)
    Add a bit more rationale to the commit message (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181114210729.16185-2-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

1 files changed, 64 insertions, 44 deletions

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index abe193815ccc..6cefe5f7a374 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -508,28 +508,12 @@ skl_program_plane(struct intel_plane *plane,
 
 	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
 
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
-		I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
-			      plane_state->color_ctl);
-
-	if (fb->format->is_yuv && icl_is_hdr_plane(plane))
-		icl_program_input_csc_coeff(crtc_state, plane_state);
-
-	I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
-	I915_WRITE_FW(PLANE_KEYMAX(pipe, plane_id), keymax);
-	I915_WRITE_FW(PLANE_KEYMSK(pipe, plane_id), keymsk);
-
-	I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
 	I915_WRITE_FW(PLANE_STRIDE(pipe, plane_id), stride);
+	I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x);
 	I915_WRITE_FW(PLANE_SIZE(pipe, plane_id), (src_h << 16) | src_w);
 	I915_WRITE_FW(PLANE_AUX_DIST(pipe, plane_id),
 		      (plane_state->color_plane[1].offset - surf_addr) | aux_stride);
 
-	if (INTEL_GEN(dev_priv) < 11)
-		I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
-			      (plane_state->color_plane[1].y << 16) |
-			       plane_state->color_plane[1].x);
-
 	if (icl_is_hdr_plane(plane)) {
 		u32 cus_ctl = 0;
 
@@ -551,15 +535,36 @@ skl_program_plane(struct intel_plane *plane,
 		I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl);
 	}
 
-	if (!slave && plane_state->scaler_id >= 0)
-		skl_program_scaler(plane, crtc_state, plane_state);
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+		I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
+			      plane_state->color_ctl);
 
-	I915_WRITE_FW(PLANE_POS(pipe, plane_id), (crtc_y << 16) | crtc_x);
+	if (fb->format->is_yuv && icl_is_hdr_plane(plane))
+		icl_program_input_csc_coeff(crtc_state, plane_state);
+
+	I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
+	I915_WRITE_FW(PLANE_KEYMSK(pipe, plane_id), keymsk);
+	I915_WRITE_FW(PLANE_KEYMAX(pipe, plane_id), keymax);
+
+	I915_WRITE_FW(PLANE_OFFSET(pipe, plane_id), (y << 16) | x);
+
+	if (INTEL_GEN(dev_priv) < 11)
+		I915_WRITE_FW(PLANE_AUX_OFFSET(pipe, plane_id),
+			      (plane_state->color_plane[1].y << 16) |
+			      plane_state->color_plane[1].x);
 
+	/*
+	 * The control register self-arms if the plane was previously
+	 * disabled. Try to make the plane enable atomic by writing
+	 * the control register just before the surface register.
+	 */
 	I915_WRITE_FW(PLANE_CTL(pipe, plane_id), plane_ctl);
 	I915_WRITE_FW(PLANE_SURF(pipe, plane_id),
 		      intel_plane_ggtt_offset(plane_state) + surf_addr);
 
+	if (!slave && plane_state->scaler_id >= 0)
+		skl_program_scaler(plane, crtc_state, plane_state);
+
 	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
 }
 
@@ -821,24 +826,29 @@ vlv_update_plane(struct intel_plane *plane,
 
 	vlv_update_clrc(plane_state);
 
+	I915_WRITE_FW(SPSTRIDE(pipe, plane_id),
+		      plane_state->color_plane[0].stride);
+	I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
+	I915_WRITE_FW(SPSIZE(pipe, plane_id), (crtc_h << 16) | crtc_w);
+	I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
+
 	if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B)
 		chv_update_csc(plane_state);
 
 	if (key->flags) {
 		I915_WRITE_FW(SPKEYMINVAL(pipe, plane_id), key->min_value);
-		I915_WRITE_FW(SPKEYMAXVAL(pipe, plane_id), key->max_value);
 		I915_WRITE_FW(SPKEYMSK(pipe, plane_id), key->channel_mask);
+		I915_WRITE_FW(SPKEYMAXVAL(pipe, plane_id), key->max_value);
 	}
-	I915_WRITE_FW(SPSTRIDE(pipe, plane_id),
-		      plane_state->color_plane[0].stride);
-	I915_WRITE_FW(SPPOS(pipe, plane_id), (crtc_y << 16) | crtc_x);
 
-	I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
 	I915_WRITE_FW(SPLINOFF(pipe, plane_id), linear_offset);
+	I915_WRITE_FW(SPTILEOFF(pipe, plane_id), (y << 16) | x);
 
-	I915_WRITE_FW(SPCONSTALPHA(pipe, plane_id), 0);
-
-	I915_WRITE_FW(SPSIZE(pipe, plane_id), (crtc_h << 16) | crtc_w);
+	/*
+	 * The control register self-arms if the plane was previously
+	 * disabled. Try to make the plane enable atomic by writing
+	 * the control register just before the surface register.
+	 */
 	I915_WRITE_FW(SPCNTR(pipe, plane_id), sprctl);
 	I915_WRITE_FW(SPSURF(pipe, plane_id),
 		      intel_plane_ggtt_offset(plane_state) + sprsurf_offset);
@@ -980,27 +990,32 @@ ivb_update_plane(struct intel_plane *plane,
 
 	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
 
+	I915_WRITE_FW(SPRSTRIDE(pipe), plane_state->color_plane[0].stride);
+	I915_WRITE_FW(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
+	I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
+	if (IS_IVYBRIDGE(dev_priv))
+		I915_WRITE_FW(SPRSCALE(pipe), sprscale);
+
 	if (key->flags) {
 		I915_WRITE_FW(SPRKEYVAL(pipe), key->min_value);
-		I915_WRITE_FW(SPRKEYMAX(pipe), key->max_value);
 		I915_WRITE_FW(SPRKEYMSK(pipe), key->channel_mask);
+		I915_WRITE_FW(SPRKEYMAX(pipe), key->max_value);
 	}
 
-	I915_WRITE_FW(SPRSTRIDE(pipe), plane_state->color_plane[0].stride);
-	I915_WRITE_FW(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
-
 	/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
 	 * register */
 	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
 		I915_WRITE_FW(SPROFFSET(pipe), (y << 16) | x);
 	} else {
-		I915_WRITE_FW(SPRTILEOFF(pipe), (y << 16) | x);
 		I915_WRITE_FW(SPRLINOFF(pipe), linear_offset);
+		I915_WRITE_FW(SPRTILEOFF(pipe), (y << 16) | x);
 	}
 
-	I915_WRITE_FW(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
-	if (IS_IVYBRIDGE(dev_priv))
-		I915_WRITE_FW(SPRSCALE(pipe), sprscale);
+	/*
+	 * The control register self-arms if the plane was previously
+	 * disabled. Try to make the plane enable atomic by writing
+	 * the control register just before the surface register.
+	 */
 	I915_WRITE_FW(SPRCTL(pipe), sprctl);
 	I915_WRITE_FW(SPRSURF(pipe),
 		      intel_plane_ggtt_offset(plane_state) + sprsurf_offset);
@@ -1018,7 +1033,7 @@ ivb_disable_plane(struct intel_plane *plane, struct intel_crtc *crtc)
 	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
 
 	I915_WRITE_FW(SPRCTL(pipe), 0);
-	/* Can't leave the scaler enabled... */
+	/* Disable the scaler */
 	if (IS_IVYBRIDGE(dev_priv))
 		I915_WRITE_FW(SPRSCALE(pipe), 0);
 	I915_WRITE_FW(SPRSURF(pipe), 0);
@@ -1148,20 +1163,25 @@ g4x_update_plane(struct intel_plane *plane,
 
 	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
 
+	I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
+	I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
+	I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
+	I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
+
 	if (key->flags) {
 		I915_WRITE_FW(DVSKEYVAL(pipe), key->min_value);
-		I915_WRITE_FW(DVSKEYMAX(pipe), key->max_value);
 		I915_WRITE_FW(DVSKEYMSK(pipe), key->channel_mask);
+		I915_WRITE_FW(DVSKEYMAX(pipe), key->max_value);
 	}
 
-	I915_WRITE_FW(DVSSTRIDE(pipe), plane_state->color_plane[0].stride);
-	I915_WRITE_FW(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
-
-	I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
 	I915_WRITE_FW(DVSLINOFF(pipe), linear_offset);
+	I915_WRITE_FW(DVSTILEOFF(pipe), (y << 16) | x);
 
-	I915_WRITE_FW(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
-	I915_WRITE_FW(DVSSCALE(pipe), dvsscale);
+	/*
+	 * The control register self-arms if the plane was previously
+	 * disabled. Try to make the plane enable atomic by writing
+	 * the control register just before the surface register.
+	 */
 	I915_WRITE_FW(DVSCNTR(pipe), dvscntr);
 	I915_WRITE_FW(DVSSURF(pipe),
 		      intel_plane_ggtt_offset(plane_state) + dvssurf_offset);