Merge tag 'iio-for-4.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

2nd round of new IIO device support, features and cleanups for the 4.6 cycle.

New Device Support
* Apex stx104 DAC
  - new driver for this PC104 board. Right now DAC support only.
* ADI ad5064
  - Add support for ad5625, ad5627, ad5645, ad5665, ad5667 DACs.
  - Add support for Linear Technology ltc2606, ltc2607, ltc2609, ltc2616,
    ltc2617, ltc2619, ltc2626, ltc2627 and ltc2629.
* ADI ad7192
  - add support for the ad7193
* Invensense mpu6050
  - substantial rework of driver to use regmap allowing SPI support extending
    the now split driver to cover the MPU6000.
* TI adc0832
  - new driver supporting ADC0831, ADC0832, ADC0834 and ADC0838 ADCs.
* TI ads1015
  - new driver, note that there is an existing hwmon driver. The long term
    intention is to probably remove the hwmon driver but for now we just have
    guards in place to ensure this driver is not built if that one is enabled.
* TI afe4403
  - new driver for this heart rate monitor / pulse oximeter front end chip.
* TI afe4404
  - new driver for this heart rate monitor / pulse oximeter front end chip.

Staging Graduations
* mxs-lradc
  - A combined general purpose and touch screen (input) device driver.
    Originally held in staging to allow reworking into and MFD but as
    that wasn't happening and isn't an absolute requirement we are moving
    it out of staging.

Driver new features
* ms5611
  - triggered buffer support
  - IIO_CHAN_INFO_SCALE to aid the triggered buffer support.

Driver cleanups / reworks / fixes
* ad5064
  - Use an enum for the register map layout to allow support of additional
    chips (precursor to the new support listed above).
  - Structural driver changes to allow support of the slightly different
    handling for the ltc parts above.
* ad5933
  - drop an exceptional & unnecessary for a function pointer.
* ad7606
  - Cleanup the repeated copies of pm ops.
  - consolidate the various channels specs via a sport of rearranging so only
    one version is needed.
* atlas ph sensor
  - add select IRQ_WORK
* hmc8543 (soon to move out of staging)
  - Comment style fixes
  - functionality of suspend and resume was swapped.
* spear-adc
  - use devm_clk_dev instead of managing the clk lifetime by hand.

Core
* Use new dmaengine_terminate_sync call to avoid a theoretical race.
* Fix docs for mlock in struct iio_dev as it is correctly taken in some
  drivers (docs used to say for core only).
* Add a helper function for calculating the scan index storage size within
  the core cutting out some cut and paste versions of the same code.

5 files changed, 2715 insertions, 0 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index b12abe16ce9d..932de1f9d1e7 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -297,6 +297,20 @@ config MEN_Z188_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called men_z188_adc.
 
+config MXS_LRADC
+        tristate "Freescale i.MX23/i.MX28 LRADC"
+        depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
+        depends on INPUT
+        select STMP_DEVICE
+        select IIO_BUFFER
+        select IIO_TRIGGERED_BUFFER
+        help
+          Say yes here to build support for i.MX23/i.MX28 LRADC convertor
+          built into these chips.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mxs-lradc.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C
@@ -362,6 +376,16 @@ config TI_ADC081C
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc081c.
 
+config TI_ADC0832
+	tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838"
+	depends on SPI
+	help
+	  If you say yes here you get support for Texas Instruments ADC0831,
+	  ADC0832, ADC0834, ADC0838 ADC chips.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-adc0832.
+
 config TI_ADC128S052
 	tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
 	depends on SPI
@@ -372,6 +396,19 @@ config TI_ADC128S052
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc128s052.
 
+config TI_ADS1015
+	tristate "Texas Instruments ADS1015 ADC"
+	depends on I2C && !SENSORS_ADS1015
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for Texas Instruments ADS1015
+	  ADC chip.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads1015.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index fb57e12dbde2..b1aa456e6af3 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -29,13 +29,16 @@ obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
+obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
+obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
+obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c
new file mode 100644
index 000000000000..33051b87aac2
--- /dev/null
+++ b/drivers/iio/adc/mxs-lradc.c
@@ -0,0 +1,1775 @@
+/*
+ * Freescale MXS LRADC driver
+ *
+ * Copyright (c) 2012 DENX Software Engineering, GmbH.
+ * Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/sysfs.h>
+
+#define DRIVER_NAME		"mxs-lradc"
+
+#define LRADC_MAX_DELAY_CHANS	4
+#define LRADC_MAX_MAPPED_CHANS	8
+#define LRADC_MAX_TOTAL_CHANS	16
+
+#define LRADC_DELAY_TIMER_HZ	2000
+
+/*
+ * Make this runtime configurable if necessary. Currently, if the buffered mode
+ * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before
+ * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000)
+ * seconds. The result is that the samples arrive every 500mS.
+ */
+#define LRADC_DELAY_TIMER_PER	200
+#define LRADC_DELAY_TIMER_LOOP	5
+
+/*
+ * Once the pen touches the touchscreen, the touchscreen switches from
+ * IRQ-driven mode to polling mode to prevent interrupt storm. The polling
+ * is realized by worker thread, which is called every 20 or so milliseconds.
+ * This gives the touchscreen enough fluency and does not strain the system
+ * too much.
+ */
+#define LRADC_TS_SAMPLE_DELAY_MS	5
+
+/*
+ * The LRADC reads the following amount of samples from each touchscreen
+ * channel and the driver then computes average of these.
+ */
+#define LRADC_TS_SAMPLE_AMOUNT		4
+
+enum mxs_lradc_id {
+	IMX23_LRADC,
+	IMX28_LRADC,
+};
+
+static const char * const mx23_lradc_irq_names[] = {
+	"mxs-lradc-touchscreen",
+	"mxs-lradc-channel0",
+	"mxs-lradc-channel1",
+	"mxs-lradc-channel2",
+	"mxs-lradc-channel3",
+	"mxs-lradc-channel4",
+	"mxs-lradc-channel5",
+	"mxs-lradc-channel6",
+	"mxs-lradc-channel7",
+};
+
+static const char * const mx28_lradc_irq_names[] = {
+	"mxs-lradc-touchscreen",
+	"mxs-lradc-thresh0",
+	"mxs-lradc-thresh1",
+	"mxs-lradc-channel0",
+	"mxs-lradc-channel1",
+	"mxs-lradc-channel2",
+	"mxs-lradc-channel3",
+	"mxs-lradc-channel4",
+	"mxs-lradc-channel5",
+	"mxs-lradc-channel6",
+	"mxs-lradc-channel7",
+	"mxs-lradc-button0",
+	"mxs-lradc-button1",
+};
+
+struct mxs_lradc_of_config {
+	const int		irq_count;
+	const char * const	*irq_name;
+	const u32		*vref_mv;
+};
+
+#define VREF_MV_BASE 1850
+
+static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
+	VREF_MV_BASE,		/* CH0 */
+	VREF_MV_BASE,		/* CH1 */
+	VREF_MV_BASE,		/* CH2 */
+	VREF_MV_BASE,		/* CH3 */
+	VREF_MV_BASE,		/* CH4 */
+	VREF_MV_BASE,		/* CH5 */
+	VREF_MV_BASE * 2,	/* CH6 VDDIO */
+	VREF_MV_BASE * 4,	/* CH7 VBATT */
+	VREF_MV_BASE,		/* CH8 Temp sense 0 */
+	VREF_MV_BASE,		/* CH9 Temp sense 1 */
+	VREF_MV_BASE,		/* CH10 */
+	VREF_MV_BASE,		/* CH11 */
+	VREF_MV_BASE,		/* CH12 USB_DP */
+	VREF_MV_BASE,		/* CH13 USB_DN */
+	VREF_MV_BASE,		/* CH14 VBG */
+	VREF_MV_BASE * 4,	/* CH15 VDD5V */
+};
+
+static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
+	VREF_MV_BASE,		/* CH0 */
+	VREF_MV_BASE,		/* CH1 */
+	VREF_MV_BASE,		/* CH2 */
+	VREF_MV_BASE,		/* CH3 */
+	VREF_MV_BASE,		/* CH4 */
+	VREF_MV_BASE,		/* CH5 */
+	VREF_MV_BASE,		/* CH6 */
+	VREF_MV_BASE * 4,	/* CH7 VBATT */
+	VREF_MV_BASE,		/* CH8 Temp sense 0 */
+	VREF_MV_BASE,		/* CH9 Temp sense 1 */
+	VREF_MV_BASE * 2,	/* CH10 VDDIO */
+	VREF_MV_BASE,		/* CH11 VTH */
+	VREF_MV_BASE * 2,	/* CH12 VDDA */
+	VREF_MV_BASE,		/* CH13 VDDD */
+	VREF_MV_BASE,		/* CH14 VBG */
+	VREF_MV_BASE * 4,	/* CH15 VDD5V */
+};
+
+static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
+	[IMX23_LRADC] = {
+		.irq_count	= ARRAY_SIZE(mx23_lradc_irq_names),
+		.irq_name	= mx23_lradc_irq_names,
+		.vref_mv	= mx23_vref_mv,
+	},
+	[IMX28_LRADC] = {
+		.irq_count	= ARRAY_SIZE(mx28_lradc_irq_names),
+		.irq_name	= mx28_lradc_irq_names,
+		.vref_mv	= mx28_vref_mv,
+	},
+};
+
+enum mxs_lradc_ts {
+	MXS_LRADC_TOUCHSCREEN_NONE = 0,
+	MXS_LRADC_TOUCHSCREEN_4WIRE,
+	MXS_LRADC_TOUCHSCREEN_5WIRE,
+};
+
+/*
+ * Touchscreen handling
+ */
+enum lradc_ts_plate {
+	LRADC_TOUCH = 0,
+	LRADC_SAMPLE_X,
+	LRADC_SAMPLE_Y,
+	LRADC_SAMPLE_PRESSURE,
+	LRADC_SAMPLE_VALID,
+};
+
+enum mxs_lradc_divbytwo {
+	MXS_LRADC_DIV_DISABLED = 0,
+	MXS_LRADC_DIV_ENABLED,
+};
+
+struct mxs_lradc_scale {
+	unsigned int		integer;
+	unsigned int		nano;
+};
+
+struct mxs_lradc {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq[13];
+
+	struct clk		*clk;
+
+	u32			*buffer;
+	struct iio_trigger	*trig;
+
+	struct mutex		lock;
+
+	struct completion	completion;
+
+	const u32		*vref_mv;
+	struct mxs_lradc_scale	scale_avail[LRADC_MAX_TOTAL_CHANS][2];
+	unsigned long		is_divided;
+
+	/*
+	 * When the touchscreen is enabled, we give it two private virtual
+	 * channels: #6 and #7. This means that only 6 virtual channels (instead
+	 * of 8) will be available for buffered capture.
+	 */
+#define TOUCHSCREEN_VCHANNEL1		7
+#define TOUCHSCREEN_VCHANNEL2		6
+#define BUFFER_VCHANS_LIMITED		0x3f
+#define BUFFER_VCHANS_ALL		0xff
+	u8			buffer_vchans;
+
+	/*
+	 * Furthermore, certain LRADC channels are shared between touchscreen
+	 * and/or touch-buttons and generic LRADC block. Therefore when using
+	 * either of these, these channels are not available for the regular
+	 * sampling. The shared channels are as follows:
+	 *
+	 * CH0 -- Touch button #0
+	 * CH1 -- Touch button #1
+	 * CH2 -- Touch screen XPUL
+	 * CH3 -- Touch screen YPLL
+	 * CH4 -- Touch screen XNUL
+	 * CH5 -- Touch screen YNLR
+	 * CH6 -- Touch screen WIPER (5-wire only)
+	 *
+	 * The bit fields below represents which parts of the LRADC block are
+	 * switched into special mode of operation. These channels can not
+	 * be sampled as regular LRADC channels. The driver will refuse any
+	 * attempt to sample these channels.
+	 */
+#define CHAN_MASK_TOUCHBUTTON		(BIT(1) | BIT(0))
+#define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 2)
+#define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 2)
+	enum mxs_lradc_ts	use_touchscreen;
+	bool			use_touchbutton;
+
+	struct input_dev	*ts_input;
+
+	enum mxs_lradc_id	soc;
+	enum lradc_ts_plate	cur_plate; /* state machine */
+	bool			ts_valid;
+	unsigned		ts_x_pos;
+	unsigned		ts_y_pos;
+	unsigned		ts_pressure;
+
+	/* handle touchscreen's physical behaviour */
+	/* samples per coordinate */
+	unsigned		over_sample_cnt;
+	/* time clocks between samples */
+	unsigned		over_sample_delay;
+	/* time in clocks to wait after the plates where switched */
+	unsigned		settling_delay;
+};
+
+#define	LRADC_CTRL0				0x00
+# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	BIT(23)
+# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	BIT(22)
+# define LRADC_CTRL0_MX28_YNNSW	/* YM */	BIT(21)
+# define LRADC_CTRL0_MX28_YPNSW	/* YP */	BIT(20)
+# define LRADC_CTRL0_MX28_YPPSW	/* YP */	BIT(19)
+# define LRADC_CTRL0_MX28_XNNSW	/* XM */	BIT(18)
+# define LRADC_CTRL0_MX28_XNPSW	/* XM */	BIT(17)
+# define LRADC_CTRL0_MX28_XPPSW	/* XP */	BIT(16)
+
+# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	BIT(20)
+# define LRADC_CTRL0_MX23_YM			BIT(19)
+# define LRADC_CTRL0_MX23_XM			BIT(18)
+# define LRADC_CTRL0_MX23_YP			BIT(17)
+# define LRADC_CTRL0_MX23_XP			BIT(16)
+
+# define LRADC_CTRL0_MX28_PLATE_MASK \
+		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
+		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
+		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
+
+# define LRADC_CTRL0_MX23_PLATE_MASK \
+		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
+		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
+
+#define	LRADC_CTRL1				0x10
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		BIT(24)
+#define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
+#define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ		BIT(8)
+#define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
+#define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
+
+#define	LRADC_CTRL2				0x20
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET	24
+#define	LRADC_CTRL2_TEMPSENSE_PWD		BIT(15)
+
+#define	LRADC_STATUS				0x40
+#define	LRADC_STATUS_TOUCH_DETECT_RAW		BIT(0)
+
+#define	LRADC_CH(n)				(0x50 + (0x10 * (n)))
+#define	LRADC_CH_ACCUMULATE			BIT(29)
+#define	LRADC_CH_NUM_SAMPLES_MASK		(0x1f << 24)
+#define	LRADC_CH_NUM_SAMPLES_OFFSET		24
+#define	LRADC_CH_NUM_SAMPLES(x) \
+				((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
+#define	LRADC_CH_VALUE_MASK			0x3ffff
+#define	LRADC_CH_VALUE_OFFSET			0
+
+#define	LRADC_DELAY(n)				(0xd0 + (0x10 * (n)))
+#define	LRADC_DELAY_TRIGGER_LRADCS_MASK		(0xffUL << 24)
+#define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET	24
+#define	LRADC_DELAY_TRIGGER(x) \
+				(((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_LRADCS_MASK)
+#define	LRADC_DELAY_KICK			BIT(20)
+#define	LRADC_DELAY_TRIGGER_DELAYS_MASK		(0xf << 16)
+#define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET	16
+#define	LRADC_DELAY_TRIGGER_DELAYS(x) \
+				(((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_DELAYS_MASK)
+#define	LRADC_DELAY_LOOP_COUNT_MASK		(0x1f << 11)
+#define	LRADC_DELAY_LOOP_COUNT_OFFSET		11
+#define	LRADC_DELAY_LOOP(x) \
+				(((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
+				LRADC_DELAY_LOOP_COUNT_MASK)
+#define	LRADC_DELAY_DELAY_MASK			0x7ff
+#define	LRADC_DELAY_DELAY_OFFSET		0
+#define	LRADC_DELAY_DELAY(x) \
+				(((x) << LRADC_DELAY_DELAY_OFFSET) & \
+				LRADC_DELAY_DELAY_MASK)
+
+#define	LRADC_CTRL4				0x140
+#define	LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
+#define	LRADC_CTRL4_LRADCSELECT_OFFSET(n)	((n) * 4)
+#define	LRADC_CTRL4_LRADCSELECT(n, x) \
+				(((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
+				LRADC_CTRL4_LRADCSELECT_MASK(n))
+
+#define LRADC_RESOLUTION			12
+#define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
+
+static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_SET);
+}
+
+static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR);
+}
+
+static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg);
+}
+
+static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_PLATE_MASK;
+	return LRADC_CTRL0_MX28_PLATE_MASK;
+}
+
+static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
+	return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
+}
+
+static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
+	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
+}
+
+static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
+	return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
+}
+
+static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
+	return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
+	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
+}
+
+static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
+	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
+{
+	return !!(readl(lradc->base + LRADC_STATUS) &
+					LRADC_STATUS_TOUCH_DETECT_RAW);
+}
+
+static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch,
+				  unsigned ch)
+{
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
+			    LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
+}
+
+static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
+{
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE |
+			  LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1),
+			  LRADC_CH(ch));
+
+	/*
+	 * from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
+
+	/*
+	 * prepare the delay/loop unit according to the oversampling count
+	 *
+	 * from the datasheet:
+	 * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
+	 * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
+	 * the LRADC will not trigger the delay group."
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
+			  LRADC_DELAY_TRIGGER_DELAYS(0) |
+			  LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+			  LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+			  LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
+
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(
+		lradc,
+		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay),
+		LRADC_DELAY(2));
+}
+
+/*
+ * Pressure detection is special:
+ * We want to do both required measurements for the pressure detection in
+ * one turn. Use the hardware features to chain both conversions and let the
+ * hardware report one interrupt if both conversions are done
+ */
+static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
+					unsigned ch2)
+{
+	u32 reg;
+
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	reg = LRADC_CH_ACCUMULATE |
+		LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1);
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
+
+	/*
+	 * from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1));
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2));
+
+	/* prepare the delay/loop unit according to the oversampling count */
+	mxs_lradc_reg_wrt(
+		    lradc,
+		    LRADC_DELAY_TRIGGER(1 << ch1) |
+		    LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */
+		    LRADC_DELAY_TRIGGER_DELAYS(0) |
+		    LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+		    LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+		    LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
+
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(
+		lradc,
+		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
+}
+
+static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc,
+					   unsigned channel)
+{
+	u32 reg;
+	unsigned num_samples, val;
+
+	reg = readl(lradc->base + LRADC_CH(channel));
+	if (reg & LRADC_CH_ACCUMULATE)
+		num_samples = lradc->over_sample_cnt;
+	else
+		num_samples = 1;
+
+	val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
+	return val / num_samples;
+}
+
+static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
+					   unsigned ch1, unsigned ch2)
+{
+	u32 reg, mask;
+	unsigned pressure, m1, m2;
+
+	mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
+	reg = readl(lradc->base + LRADC_CTRL1) & mask;
+
+	while (reg != mask) {
+		reg = readl(lradc->base + LRADC_CTRL1) & mask;
+		dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg);
+	}
+
+	m1 = mxs_lradc_read_raw_channel(lradc, ch1);
+	m2 = mxs_lradc_read_raw_channel(lradc, ch2);
+
+	if (m2 == 0) {
+		dev_warn(lradc->dev, "Cannot calculate pressure\n");
+		return 1 << (LRADC_RESOLUTION - 1);
+	}
+
+	/* simply scale the value from 0 ... max ADC resolution */
+	pressure = m1;
+	pressure *= (1 << LRADC_RESOLUTION);
+	pressure /= m2;
+
+	dev_dbg(lradc->dev, "Pressure = %u\n", pressure);
+	return pressure;
+}
+
+#define TS_CH_XP 2
+#define TS_CH_YP 3
+#define TS_CH_XM 4
+#define TS_CH_YM 5
+
+/*
+ * YP(open)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ *    YM(-)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *         XP(weak+)        XM(open)
+ *
+ * "weak+" means 200k Ohm VDDIO
+ * (-) means GND
+ */
+static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc)
+{
+	/*
+	 * In order to detect a touch event the 'touch detect enable' bit
+	 * enables:
+	 *  - a weak pullup to the X+ connector
+	 *  - a strong ground at the Y- connector
+	 */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
+			  LRADC_CTRL0);
+}
+
+/*
+ * YP(meas)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(open)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *           XP(+)          XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_X;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
+}
+
+/*
+ *   YP(+)--+-------------+
+ *          |             |--+
+ *          |             |  |
+ *   YM(-)--+-------------+  |
+ *            +--------------+
+ *            |              |
+ *         XP(open)        XM(meas)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_Y;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
+}
+
+/*
+ *    YP(+)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(meas)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *          XP(meas)        XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
+	mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2,
+				    TOUCHSCREEN_VCHANNEL1);
+}
+
+static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+
+	lradc->cur_plate = LRADC_TOUCH;
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
+			    LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc,
+			  LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1),
+			  LRADC_CTRL1);
+	/*
+	 * start with the Y-pos, because it uses nearly the same plate
+	 * settings like the touch detection
+	 */
+	mxs_lradc_prepare_y_pos(lradc);
+}
+
+static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
+{
+	input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
+	input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos);
+	input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure);
+	input_report_key(lradc->ts_input, BTN_TOUCH, 1);
+	input_sync(lradc->ts_input);
+}
+
+static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+	lradc->cur_plate = LRADC_SAMPLE_VALID;
+	/*
+	 * start a dummy conversion to burn time to settle the signals
+	 * note: we are not interested in the conversion's value
+	 */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2),
+			    LRADC_CTRL1);
+	mxs_lradc_reg_wrt(
+		    lradc,
+		    LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
+		    LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
+		    LRADC_DELAY(2));
+}
+
+/*
+ * in order to avoid false measurements, report only samples where
+ * the surface is still touched after the position measurement
+ */
+static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
+{
+	/* if it is still touched, report the sample */
+	if (valid && mxs_lradc_check_touch_event(lradc)) {
+		lradc->ts_valid = true;
+		mxs_lradc_report_ts_event(lradc);
+	}
+
+	/* if it is even still touched, continue with the next measurement */
+	if (mxs_lradc_check_touch_event(lradc)) {
+		mxs_lradc_prepare_y_pos(lradc);
+		return;
+	}
+
+	if (lradc->ts_valid) {
+		/* signal the release */
+		lradc->ts_valid = false;
+		input_report_key(lradc->ts_input, BTN_TOUCH, 0);
+		input_sync(lradc->ts_input);
+	}
+
+	/* if it is released, wait for the next touch via IRQ */
+	lradc->cur_plate = LRADC_TOUCH;
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ |
+			    LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1),
+			    LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+/* touchscreen's state machine */
+static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
+{
+	switch (lradc->cur_plate) {
+	case LRADC_TOUCH:
+		if (mxs_lradc_check_touch_event(lradc))
+			mxs_lradc_start_touch_event(lradc);
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
+				    LRADC_CTRL1);
+		return;
+
+	case LRADC_SAMPLE_Y:
+		lradc->ts_y_pos =
+		    mxs_lradc_read_raw_channel(lradc,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_prepare_x_pos(lradc);
+		return;
+
+	case LRADC_SAMPLE_X:
+		lradc->ts_x_pos =
+		    mxs_lradc_read_raw_channel(lradc,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_prepare_pressure(lradc);
+		return;
+
+	case LRADC_SAMPLE_PRESSURE:
+		lradc->ts_pressure =
+		    mxs_lradc_read_ts_pressure(lradc,
+					       TOUCHSCREEN_VCHANNEL2,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_complete_touch_event(lradc);
+		return;
+
+	case LRADC_SAMPLE_VALID:
+		mxs_lradc_finish_touch_event(lradc, 1);
+		break;
+	}
+}
+
+/*
+ * Raw I/O operations
+ */
+static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+	int ret;
+
+	/*
+	 * See if there is no buffered operation in progress. If there is, simply
+	 * bail out. This can be improved to support both buffered and raw IO at
+	 * the same time, yet the code becomes horribly complicated. Therefore I
+	 * applied KISS principle here.
+	 */
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	reinit_completion(&lradc->completion);
+
+	/*
+	 * No buffered operation in progress, map the channel and trigger it.
+	 * Virtual channel 0 is always used here as the others are always not
+	 * used if doing raw sampling.
+	 */
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
+				    LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);
+
+	/* Enable / disable the divider per requirement */
+	if (test_bit(chan, &lradc->is_divided))
+		mxs_lradc_reg_set(lradc,
+				  1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+				  LRADC_CTRL2);
+	else
+		mxs_lradc_reg_clear(lradc,
+				    1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+				    LRADC_CTRL2);
+
+	/* Clean the slot's previous content, then set new one. */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0),
+			    LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4);
+
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0));
+
+	/* Enable the IRQ and start sampling the channel. */
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0);
+
+	/* Wait for completion on the channel, 1 second max. */
+	ret = wait_for_completion_killable_timeout(&lradc->completion, HZ);
+	if (!ret)
+		ret = -ETIMEDOUT;
+	if (ret < 0)
+		goto err;
+
+	/* Read the data. */
+	*val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK;
+	ret = IIO_VAL_INT;
+
+err:
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
+
+	mutex_unlock(&lradc->lock);
+
+	return ret;
+}
+
+static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val)
+{
+	int ret, min, max;
+
+	ret = mxs_lradc_read_single(iio_dev, 8, &min);
+	if (ret != IIO_VAL_INT)
+		return ret;
+
+	ret = mxs_lradc_read_single(iio_dev, 9, &max);
+	if (ret != IIO_VAL_INT)
+		return ret;
+
+	*val = max - min;
+
+	return IIO_VAL_INT;
+}
+
+static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
+			      const struct iio_chan_spec *chan,
+			      int *val, int *val2, long m)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_TEMP)
+			return mxs_lradc_read_temp(iio_dev, val);
+
+		return mxs_lradc_read_single(iio_dev, chan->channel, val);
+
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP) {
+			/*
+			 * From the datasheet, we have to multiply by 1.012 and
+			 * divide by 4
+			 */
+			*val = 0;
+			*val2 = 253000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+
+		*val = lradc->vref_mv[chan->channel];
+		*val2 = chan->scan_type.realbits -
+			test_bit(chan->channel, &lradc->is_divided);
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			/*
+			 * The calculated value from the ADC is in Kelvin, we
+			 * want Celsius for hwmon so the offset is -273.15
+			 * The offset is applied before scaling so it is
+			 * actually -213.15 * 4 / 1.012 = -1079.644268
+			 */
+			*val = -1079;
+			*val2 = 644268;
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+
+		return -EINVAL;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int mxs_lradc_write_raw(struct iio_dev *iio_dev,
+			       const struct iio_chan_spec *chan,
+			       int val, int val2, long m)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+	struct mxs_lradc_scale *scale_avail =
+			lradc->scale_avail[chan->channel];
+	int ret;
+
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = -EINVAL;
+		if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer &&
+		    val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) {
+			/* divider by two disabled */
+			clear_bit(chan->channel, &lradc->is_divided);
+			ret = 0;
+		} else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer &&
+			   val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) {
+			/* divider by two enabled */
+			set_bit(chan->channel, &lradc->is_divided);
+			ret = 0;
+		}
+
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&lradc->lock);
+
+	return ret;
+}
+
+static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev,
+				       const struct iio_chan_spec *chan,
+				       long m)
+{
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf,
+						 int ch)
+{
+	struct iio_dev *iio = dev_to_iio_dev(dev);
+	struct mxs_lradc *lradc = iio_priv(iio);
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++)
+		len += sprintf(buf + len, "%u.%09u ",
+			       lradc->scale_avail[ch][i].integer,
+			       lradc->scale_avail[ch][i].nano);
+
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t mxs_lradc_show_scale_available(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr);
+
+	return mxs_lradc_show_scale_available_ch(dev, attr, buf,
+						 iio_attr->address);
+}
+
+#define SHOW_SCALE_AVAILABLE_ATTR(ch)					\
+static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO,	\
+		       mxs_lradc_show_scale_available, NULL, ch)
+
+SHOW_SCALE_AVAILABLE_ATTR(0);
+SHOW_SCALE_AVAILABLE_ATTR(1);
+SHOW_SCALE_AVAILABLE_ATTR(2);
+SHOW_SCALE_AVAILABLE_ATTR(3);
+SHOW_SCALE_AVAILABLE_ATTR(4);
+SHOW_SCALE_AVAILABLE_ATTR(5);
+SHOW_SCALE_AVAILABLE_ATTR(6);
+SHOW_SCALE_AVAILABLE_ATTR(7);
+SHOW_SCALE_AVAILABLE_ATTR(10);
+SHOW_SCALE_AVAILABLE_ATTR(11);
+SHOW_SCALE_AVAILABLE_ATTR(12);
+SHOW_SCALE_AVAILABLE_ATTR(13);
+SHOW_SCALE_AVAILABLE_ATTR(14);
+SHOW_SCALE_AVAILABLE_ATTR(15);
+
+static struct attribute *mxs_lradc_attributes[] = {
+	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage1_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage2_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage3_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage4_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage13_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage14_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage15_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mxs_lradc_attribute_group = {
+	.attrs = mxs_lradc_attributes,
+};
+
+static const struct iio_info mxs_lradc_iio_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= mxs_lradc_read_raw,
+	.write_raw		= mxs_lradc_write_raw,
+	.write_raw_get_fmt	= mxs_lradc_write_raw_get_fmt,
+	.attrs			= &mxs_lradc_attribute_group,
+};
+
+static int mxs_lradc_ts_open(struct input_dev *dev)
+{
+	struct mxs_lradc *lradc = input_get_drvdata(dev);
+
+	/* Enable the touch-detect circuitry. */
+	mxs_lradc_enable_touch_detection(lradc);
+
+	return 0;
+}
+
+static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
+{
+	/* stop all interrupts from firing */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
+
+	/* Power-down touchscreen touch-detect circuitry. */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+}
+
+static void mxs_lradc_ts_close(struct input_dev *dev)
+{
+	struct mxs_lradc *lradc = input_get_drvdata(dev);
+
+	mxs_lradc_disable_ts(lradc);
+}
+
+static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
+{
+	struct input_dev *input;
+	struct device *dev = lradc->dev;
+	int ret;
+
+	if (!lradc->use_touchscreen)
+		return 0;
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	input->name = DRIVER_NAME;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input->open = mxs_lradc_ts_open;
+	input->close = mxs_lradc_ts_close;
+
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
+			     0, 0);
+
+	lradc->ts_input = input;
+	input_set_drvdata(input, lradc);
+	ret = input_register_device(input);
+	if (ret)
+		input_free_device(lradc->ts_input);
+
+	return ret;
+}
+
+static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc)
+{
+	if (!lradc->use_touchscreen)
+		return;
+
+	mxs_lradc_disable_ts(lradc);
+	input_unregister_device(lradc->ts_input);
+}
+
+/*
+ * IRQ Handling
+ */
+static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
+{
+	struct iio_dev *iio = data;
+	struct mxs_lradc *lradc = iio_priv(iio);
+	unsigned long reg = readl(lradc->base + LRADC_CTRL1);
+	u32 clr_irq = mxs_lradc_irq_mask(lradc);
+	const u32 ts_irq_mask =
+		LRADC_CTRL1_TOUCH_DETECT_IRQ |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
+
+	if (!(reg & mxs_lradc_irq_mask(lradc)))
+		return IRQ_NONE;
+
+	if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
+		mxs_lradc_handle_touch(lradc);
+
+		/* Make sure we don't clear the next conversion's interrupt. */
+		clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+				LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
+	}
+
+	if (iio_buffer_enabled(iio)) {
+		if (reg & lradc->buffer_vchans)
+			iio_trigger_poll(iio->trig);
+	} else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) {
+		complete(&lradc->completion);
+	}
+
+	mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Trigger handling
+ */
+static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio = pf->indio_dev;
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const u32 chan_value = LRADC_CH_ACCUMULATE |
+		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
+	unsigned int i, j = 0;
+
+	for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
+		lradc->buffer[j] = readl(lradc->base + LRADC_CH(j));
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j));
+		lradc->buffer[j] &= LRADC_CH_VALUE_MASK;
+		lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP;
+		j++;
+	}
+
+	iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp);
+
+	iio_trigger_notify_done(iio->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *iio = iio_trigger_get_drvdata(trig);
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR;
+
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops mxs_lradc_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &mxs_lradc_configure_trigger,
+};
+
+static int mxs_lradc_trigger_init(struct iio_dev *iio)
+{
+	int ret;
+	struct iio_trigger *trig;
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id);
+	if (!trig)
+		return -ENOMEM;
+
+	trig->dev.parent = lradc->dev;
+	iio_trigger_set_drvdata(trig, iio);
+	trig->ops = &mxs_lradc_trigger_ops;
+
+	ret = iio_trigger_register(trig);
+	if (ret) {
+		iio_trigger_free(trig);
+		return ret;
+	}
+
+	lradc->trig = trig;
+
+	return 0;
+}
+
+static void mxs_lradc_trigger_remove(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	iio_trigger_unregister(lradc->trig);
+	iio_trigger_free(lradc->trig);
+}
+
+static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+	int ret = 0, chan, ofs = 0;
+	unsigned long enable = 0;
+	u32 ctrl4_set = 0;
+	u32 ctrl4_clr = 0;
+	u32 ctrl1_irq = 0;
+	const u32 chan_value = LRADC_CH_ACCUMULATE |
+		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
+	const int len = bitmap_weight(iio->active_scan_mask,
+			LRADC_MAX_TOTAL_CHANS);
+
+	if (!len)
+		return -EINVAL;
+
+	/*
+	 * Lock the driver so raw access can not be done during buffered
+	 * operation. This simplifies the code a lot.
+	 */
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL);
+	if (!lradc->buffer) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(
+			lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+			LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
+
+	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
+		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
+		ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
+		ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs));
+		bitmap_set(&enable, ofs, 1);
+		ofs++;
+	}
+
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+			    LRADC_DELAY_KICK, LRADC_DELAY(0));
+	mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET,
+			  LRADC_DELAY(0));
+
+	return 0;
+
+err_mem:
+	mutex_unlock(&lradc->lock);
+	return ret;
+}
+
+static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+			    LRADC_DELAY_KICK, LRADC_DELAY(0));
+
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(
+			lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+			LRADC_CTRL1);
+
+	kfree(lradc->buffer);
+	mutex_unlock(&lradc->lock);
+
+	return 0;
+}
+
+static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio,
+					 const unsigned long *mask)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS);
+	int rsvd_chans = 0;
+	unsigned long rsvd_mask = 0;
+
+	if (lradc->use_touchbutton)
+		rsvd_mask |= CHAN_MASK_TOUCHBUTTON;
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE)
+		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE;
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE;
+
+	if (lradc->use_touchbutton)
+		rsvd_chans++;
+	if (lradc->use_touchscreen)
+		rsvd_chans += 2;
+
+	/* Test for attempts to map channels with special mode of operation. */
+	if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS))
+		return false;
+
+	/* Test for attempts to map more channels then available slots. */
+	if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS)
+		return false;
+
+	return true;
+}
+
+static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = {
+	.preenable = &mxs_lradc_buffer_preenable,
+	.postenable = &iio_triggered_buffer_postenable,
+	.predisable = &iio_triggered_buffer_predisable,
+	.postdisable = &mxs_lradc_buffer_postdisable,
+	.validate_scan_mask = &mxs_lradc_validate_scan_mask,
+};
+
+/*
+ * Driver initialization
+ */
+
+#define MXS_ADC_CHAN(idx, chan_type, name) {			\
+	.type = (chan_type),					\
+	.indexed = 1,						\
+	.scan_index = (idx),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			      BIT(IIO_CHAN_INFO_SCALE),		\
+	.channel = (idx),					\
+	.address = (idx),					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = LRADC_RESOLUTION,			\
+		.storagebits = 32,				\
+	},							\
+	.datasheet_name = (name),				\
+}
+
+static const struct iio_chan_spec mx23_lradc_chan_spec[] = {
+	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
+	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
+	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
+	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
+	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
+	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
+	MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"),
+	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
+	/* Combined Temperature sensors */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = 8,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_OFFSET) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.channel = 8,
+		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
+		.datasheet_name = "TEMP_DIE",
+	},
+	/* Hidden channel to keep indexes */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = -1,
+		.channel = 9,
+	},
+	MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL),
+	MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL),
+	MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"),
+	MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"),
+	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
+	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
+};
+
+static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
+	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
+	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
+	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
+	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
+	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
+	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
+	MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"),
+	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
+	/* Combined Temperature sensors */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = 8,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_OFFSET) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.channel = 8,
+		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
+		.datasheet_name = "TEMP_DIE",
+	},
+	/* Hidden channel to keep indexes */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = -1,
+		.channel = 9,
+	},
+	MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"),
+	MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"),
+	MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"),
+	MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"),
+	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
+	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
+};
+
+static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
+{
+	/* The ADC always uses DELAY CHANNEL 0. */
+	const u32 adc_cfg =
+		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
+		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
+
+	int ret = stmp_reset_block(lradc->base);
+
+	if (ret)
+		return ret;
+
+	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
+	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
+
+	/* Disable remaining DELAY CHANNELs */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+
+	/* Configure the touchscreen type */
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				    LRADC_CTRL0);
+
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				  LRADC_CTRL0);
+	}
+
+	/* Start internal temperature sensing. */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
+
+	return 0;
+}
+
+static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
+{
+	int i;
+
+	mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1);
+
+	for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
+		mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i));
+}
+
+static const struct of_device_id mxs_lradc_dt_ids[] = {
+	{ .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
+	{ .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
+
+static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
+				       struct device_node *lradc_node)
+{
+	int ret;
+	u32 ts_wires = 0, adapt;
+
+	ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires",
+				   &ts_wires);
+	if (ret)
+		return -ENODEV; /* touchscreen feature disabled */
+
+	switch (ts_wires) {
+	case 4:
+		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
+		break;
+	case 5:
+		if (lradc->soc == IMX28_LRADC) {
+			lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
+			break;
+		}
+		/* fall through an error message for i.MX23 */
+	default:
+		dev_err(lradc->dev,
+			"Unsupported number of touchscreen wires (%d)\n",
+			ts_wires);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) {
+		lradc->over_sample_cnt = 4;
+	} else {
+		if (adapt < 1 || adapt > 32) {
+			dev_err(lradc->dev, "Invalid sample count (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->over_sample_cnt = adapt;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) {
+		lradc->over_sample_delay = 2;
+	} else {
+		if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) {
+			dev_err(lradc->dev, "Invalid sample delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->over_sample_delay = adapt;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) {
+		lradc->settling_delay = 10;
+	} else {
+		if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) {
+			dev_err(lradc->dev, "Invalid settling delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->settling_delay = adapt;
+	}
+
+	return 0;
+}
+
+static int mxs_lradc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+		of_match_device(mxs_lradc_dt_ids, &pdev->dev);
+	const struct mxs_lradc_of_config *of_cfg =
+		&mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct mxs_lradc *lradc;
+	struct iio_dev *iio;
+	struct resource *iores;
+	int ret = 0, touch_ret;
+	int i, s;
+	u64 scale_uv;
+
+	/* Allocate the IIO device. */
+	iio = devm_iio_device_alloc(dev, sizeof(*lradc));
+	if (!iio) {
+		dev_err(dev, "Failed to allocate IIO device\n");
+		return -ENOMEM;
+	}
+
+	lradc = iio_priv(iio);
+	lradc->soc = (enum mxs_lradc_id)of_id->data;
+
+	/* Grab the memory area */
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lradc->dev = &pdev->dev;
+	lradc->base = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(lradc->base))
+		return PTR_ERR(lradc->base);
+
+	lradc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lradc->clk)) {
+		dev_err(dev, "Failed to get the delay unit clock\n");
+		return PTR_ERR(lradc->clk);
+	}
+	ret = clk_prepare_enable(lradc->clk);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable the delay unit clock\n");
+		return ret;
+	}
+
+	touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
+
+	if (touch_ret == 0)
+		lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
+	else
+		lradc->buffer_vchans = BUFFER_VCHANS_ALL;
+
+	/* Grab all IRQ sources */
+	for (i = 0; i < of_cfg->irq_count; i++) {
+		lradc->irq[i] = platform_get_irq(pdev, i);
+		if (lradc->irq[i] < 0) {
+			ret = lradc->irq[i];
+			goto err_clk;
+		}
+
+		ret = devm_request_irq(dev, lradc->irq[i],
+				       mxs_lradc_handle_irq, 0,
+				       of_cfg->irq_name[i], iio);
+		if (ret)
+			goto err_clk;
+	}
+
+	lradc->vref_mv = of_cfg->vref_mv;
+
+	platform_set_drvdata(pdev, iio);
+
+	init_completion(&lradc->completion);
+	mutex_init(&lradc->lock);
+
+	iio->name = pdev->name;
+	iio->dev.parent = &pdev->dev;
+	iio->info = &mxs_lradc_iio_info;
+	iio->modes = INDIO_DIRECT_MODE;
+	iio->masklength = LRADC_MAX_TOTAL_CHANS;
+
+	if (lradc->soc == IMX23_LRADC) {
+		iio->channels = mx23_lradc_chan_spec;
+		iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec);
+	} else {
+		iio->channels = mx28_lradc_chan_spec;
+		iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec);
+	}
+
+	ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time,
+					 &mxs_lradc_trigger_handler,
+					 &mxs_lradc_buffer_ops);
+	if (ret)
+		goto err_clk;
+
+	ret = mxs_lradc_trigger_init(iio);
+	if (ret)
+		goto err_trig;
+
+	/* Populate available ADC input ranges */
+	for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) {
+		for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) {
+			/*
+			 * [s=0] = optional divider by two disabled (default)
+			 * [s=1] = optional divider by two enabled
+			 *
+			 * The scale is calculated by doing:
+			 *   Vref >> (realbits - s)
+			 * which multiplies by two on the second component
+			 * of the array.
+			 */
+			scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
+				   (LRADC_RESOLUTION - s);
+			lradc->scale_avail[i][s].nano =
+					do_div(scale_uv, 100000000) * 10;
+			lradc->scale_avail[i][s].integer = scale_uv;
+		}
+	}
+
+	/* Configure the hardware. */
+	ret = mxs_lradc_hw_init(lradc);
+	if (ret)
+		goto err_dev;
+
+	/* Register the touchscreen input device. */
+	if (touch_ret == 0) {
+		ret = mxs_lradc_ts_register(lradc);
+		if (ret)
+			goto err_ts_register;
+	}
+
+	/* Register IIO device. */
+	ret = iio_device_register(iio);
+	if (ret) {
+		dev_err(dev, "Failed to register IIO device\n");
+		goto err_ts;
+	}
+
+	return 0;
+
+err_ts:
+	mxs_lradc_ts_unregister(lradc);
+err_ts_register:
+	mxs_lradc_hw_stop(lradc);
+err_dev:
+	mxs_lradc_trigger_remove(iio);
+err_trig:
+	iio_triggered_buffer_cleanup(iio);
+err_clk:
+	clk_disable_unprepare(lradc->clk);
+	return ret;
+}
+
+static int mxs_lradc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *iio = platform_get_drvdata(pdev);
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	iio_device_unregister(iio);
+	mxs_lradc_ts_unregister(lradc);
+	mxs_lradc_hw_stop(lradc);
+	mxs_lradc_trigger_remove(iio);
+	iio_triggered_buffer_cleanup(iio);
+
+	clk_disable_unprepare(lradc->clk);
+
+	return 0;
+}
+
+static struct platform_driver mxs_lradc_driver = {
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.of_match_table = mxs_lradc_dt_ids,
+	},
+	.probe	= mxs_lradc_probe,
+	.remove	= mxs_lradc_remove,
+};
+
+module_platform_driver(mxs_lradc_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Freescale MXS LRADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/iio/adc/ti-adc0832.c b/drivers/iio/adc/ti-adc0832.c
new file mode 100644
index 000000000000..0afeac0c9bad
--- /dev/null
+++ b/drivers/iio/adc/ti-adc0832.c
@@ -0,0 +1,288 @@
+/*
+ * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+enum {
+	adc0831,
+	adc0832,
+	adc0834,
+	adc0838,
+};
+
+struct adc0832 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	struct mutex lock;
+	u8 mux_bits;
+
+	u8 tx_buf[2] ____cacheline_aligned;
+	u8 rx_buf[2];
+};
+
+#define ADC0832_VOLTAGE_CHANNEL(chan)					\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+	}
+
+#define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+	}
+
+static const struct iio_chan_spec adc0831_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+};
+
+static const struct iio_chan_spec adc0832_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+};
+
+static const struct iio_chan_spec adc0834_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL(2),
+	ADC0832_VOLTAGE_CHANNEL(3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2),
+};
+
+static const struct iio_chan_spec adc0838_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL(2),
+	ADC0832_VOLTAGE_CHANNEL(3),
+	ADC0832_VOLTAGE_CHANNEL(4),
+	ADC0832_VOLTAGE_CHANNEL(5),
+	ADC0832_VOLTAGE_CHANNEL(6),
+	ADC0832_VOLTAGE_CHANNEL(7),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6),
+};
+
+static int adc0831_adc_conversion(struct adc0832 *adc)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	/*
+	 * Skip TRI-STATE and a leading zero
+	 */
+	return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6);
+}
+
+static int adc0832_adc_conversion(struct adc0832 *adc, int channel,
+				bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	struct spi_transfer xfer = {
+		.tx_buf = adc->tx_buf,
+		.rx_buf = adc->rx_buf,
+		.len = 2,
+	};
+	int ret;
+
+	if (!adc->mux_bits)
+		return adc0831_adc_conversion(adc);
+
+	/* start bit */
+	adc->tx_buf[0] = 1 << (adc->mux_bits + 1);
+	/* single-ended or differential */
+	adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits);
+	/* odd / sign */
+	adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1);
+	/* select */
+	if (adc->mux_bits > 1)
+		adc->tx_buf[0] |= channel / 2;
+
+	/* align Data output BIT7 (MSB) to 8-bit boundary */
+	adc->tx_buf[0] <<= 1;
+
+	ret = spi_sync_transfer(spi, &xfer, 1);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf[1];
+}
+
+static int adc0832_read_raw(struct iio_dev *iio,
+			struct iio_chan_spec const *channel, int *value,
+			int *shift, long mask)
+{
+	struct adc0832 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = adc0832_adc_conversion(adc, channel->channel,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 8;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info adc0832_info = {
+	.read_raw = adc0832_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int adc0832_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adc0832 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->info = &adc0832_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	switch (spi_get_device_id(spi)->driver_data) {
+	case adc0831:
+		adc->mux_bits = 0;
+		indio_dev->channels = adc0831_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0831_channels);
+		break;
+	case adc0832:
+		adc->mux_bits = 1;
+		indio_dev->channels = adc0832_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0832_channels);
+		break;
+	case adc0834:
+		adc->mux_bits = 2;
+		indio_dev->channels = adc0834_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0834_channels);
+		break;
+	case adc0838:
+		adc->mux_bits = 3;
+		indio_dev->channels = adc0838_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0838_channels);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		regulator_disable(adc->reg);
+
+	return ret;
+}
+
+static int adc0832_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct adc0832 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+
+static const struct of_device_id adc0832_dt_ids[] = {
+	{ .compatible = "ti,adc0831", },
+	{ .compatible = "ti,adc0832", },
+	{ .compatible = "ti,adc0834", },
+	{ .compatible = "ti,adc0838", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adc0832_dt_ids);
+
+#endif
+
+static const struct spi_device_id adc0832_id[] = {
+	{ "adc0831", adc0831 },
+	{ "adc0832", adc0832 },
+	{ "adc0834", adc0834 },
+	{ "adc0838", adc0838 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adc0832_id);
+
+static struct spi_driver adc0832_driver = {
+	.driver = {
+		.name = "adc0832",
+		.of_match_table = of_match_ptr(adc0832_dt_ids),
+	},
+	.probe = adc0832_probe,
+	.remove = adc0832_remove,
+	.id_table = adc0832_id,
+};
+module_spi_driver(adc0832_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
new file mode 100644
index 000000000000..73cbf0b54e54
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -0,0 +1,612 @@
+/*
+ * ADS1015 - Texas Instruments Analog-to-Digital Converter
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for ADS1015 ADC 7-bit I2C slave address:
+ *	* 0x48 - ADDR connected to Ground
+ *	* 0x49 - ADDR connected to Vdd
+ *	* 0x4A - ADDR connected to SDA
+ *	* 0x4B - ADDR connected to SCL
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <linux/i2c/ads1015.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define ADS1015_DRV_NAME "ads1015"
+
+#define ADS1015_CONV_REG	0x00
+#define ADS1015_CFG_REG		0x01
+
+#define ADS1015_CFG_DR_SHIFT	5
+#define ADS1015_CFG_MOD_SHIFT	8
+#define ADS1015_CFG_PGA_SHIFT	9
+#define ADS1015_CFG_MUX_SHIFT	12
+
+#define ADS1015_CFG_DR_MASK	GENMASK(7, 5)
+#define ADS1015_CFG_MOD_MASK	BIT(8)
+#define ADS1015_CFG_PGA_MASK	GENMASK(11, 9)
+#define ADS1015_CFG_MUX_MASK	GENMASK(14, 12)
+
+/* device operating modes */
+#define ADS1015_CONTINUOUS	0
+#define ADS1015_SINGLESHOT	1
+
+#define ADS1015_SLEEP_DELAY_MS		2000
+#define ADS1015_DEFAULT_PGA		2
+#define ADS1015_DEFAULT_DATA_RATE	4
+#define ADS1015_DEFAULT_CHAN		0
+
+enum ads1015_channels {
+	ADS1015_AIN0_AIN1 = 0,
+	ADS1015_AIN0_AIN3,
+	ADS1015_AIN1_AIN3,
+	ADS1015_AIN2_AIN3,
+	ADS1015_AIN0,
+	ADS1015_AIN1,
+	ADS1015_AIN2,
+	ADS1015_AIN3,
+	ADS1015_TIMESTAMP,
+};
+
+static const unsigned int ads1015_data_rate[] = {
+	128, 250, 490, 920, 1600, 2400, 3300, 3300
+};
+
+static const struct {
+	int scale;
+	int uscale;
+} ads1015_scale[] = {
+	{3, 0},
+	{2, 0},
+	{1, 0},
+	{0, 500000},
+	{0, 250000},
+	{0, 125000},
+	{0, 125000},
+	{0, 125000},
+};
+
+#define ADS1015_V_CHAN(_chan, _addr) {				\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.address = _addr,					\
+	.channel = _chan,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = _addr,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 12,					\
+		.storagebits = 16,				\
+		.shift = 4,					\
+		.endianness = IIO_CPU,				\
+	},							\
+}
+
+#define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) {		\
+	.type = IIO_VOLTAGE,					\
+	.differential = 1,					\
+	.indexed = 1,						\
+	.address = _addr,					\
+	.channel = _chan,					\
+	.channel2 = _chan2,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = _addr,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 12,					\
+		.storagebits = 16,				\
+		.shift = 4,					\
+		.endianness = IIO_CPU,				\
+	},							\
+}
+
+struct ads1015_data {
+	struct regmap *regmap;
+	/*
+	 * Protects ADC ops, e.g: concurrent sysfs/buffered
+	 * data reads, configuration updates
+	 */
+	struct mutex lock;
+	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
+};
+
+static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg == ADS1015_CFG_REG);
+}
+
+static const struct regmap_config ads1015_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = ADS1015_CFG_REG,
+	.writeable_reg = ads1015_is_writeable_reg,
+};
+
+static const struct iio_chan_spec ads1015_channels[] = {
+	ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1),
+	ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3),
+	ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3),
+	ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3),
+	ADS1015_V_CHAN(0, ADS1015_AIN0),
+	ADS1015_V_CHAN(1, ADS1015_AIN1),
+	ADS1015_V_CHAN(2, ADS1015_AIN2),
+	ADS1015_V_CHAN(3, ADS1015_AIN3),
+	IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
+};
+
+static int ads1015_set_power_state(struct ads1015_data *data, bool on)
+{
+	int ret;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (on) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			pm_runtime_put_noidle(dev);
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
+}
+
+static
+int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
+{
+	int ret, pga, dr, conv_time;
+	bool change;
+
+	if (chan < 0 || chan >= ADS1015_CHANNELS)
+		return -EINVAL;
+
+	pga = data->channel_data[chan].pga;
+	dr = data->channel_data[chan].data_rate;
+
+	ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG,
+				       ADS1015_CFG_MUX_MASK |
+				       ADS1015_CFG_PGA_MASK,
+				       chan << ADS1015_CFG_MUX_SHIFT |
+				       pga << ADS1015_CFG_PGA_SHIFT,
+				       &change);
+	if (ret < 0)
+		return ret;
+
+	if (change) {
+		conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]);
+		usleep_range(conv_time, conv_time + 1);
+	}
+
+	return regmap_read(data->regmap, ADS1015_CONV_REG, val);
+}
+
+static irqreturn_t ads1015_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ads1015_data *data = iio_priv(indio_dev);
+	s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding +  4x s16 timestamp */
+	int chan, ret, res;
+
+	memset(buf, 0, sizeof(buf));
+
+	mutex_lock(&data->lock);
+	chan = find_first_bit(indio_dev->active_scan_mask,
+			      indio_dev->masklength);
+	ret = ads1015_get_adc_result(data, chan, &res);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		goto err;
+	}
+
+	buf[0] = res;
+	mutex_unlock(&data->lock);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ads1015_set_scale(struct ads1015_data *data, int chan,
+			     int scale, int uscale)
+{
+	int i, ret, rindex = -1;
+
+	for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++)
+		if (ads1015_scale[i].scale == scale &&
+		    ads1015_scale[i].uscale == uscale) {
+			rindex = i;
+			break;
+		}
+	if (rindex < 0)
+		return -EINVAL;
+
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				 ADS1015_CFG_PGA_MASK,
+				 rindex << ADS1015_CFG_PGA_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	data->channel_data[chan].pga = rindex;
+
+	return 0;
+}
+
+static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
+{
+	int i, ret, rindex = -1;
+
+	for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++)
+		if (ads1015_data_rate[i] == rate) {
+			rindex = i;
+			break;
+		}
+	if (rindex < 0)
+		return -EINVAL;
+
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				 ADS1015_CFG_DR_MASK,
+				 rindex << ADS1015_CFG_DR_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	data->channel_data[chan].data_rate = rindex;
+
+	return 0;
+}
+
+static int ads1015_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	int ret, idx;
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&data->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev)) {
+			ret = -EBUSY;
+			break;
+		}
+
+		ret = ads1015_set_power_state(data, true);
+		if (ret < 0)
+			break;
+
+		ret = ads1015_get_adc_result(data, chan->address, val);
+		if (ret < 0) {
+			ads1015_set_power_state(data, false);
+			break;
+		}
+
+		/* 12 bit res, D0 is bit 4 in conversion register */
+		*val = sign_extend32(*val >> 4, 11);
+
+		ret = ads1015_set_power_state(data, false);
+		if (ret < 0)
+			break;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		idx = data->channel_data[chan->address].pga;
+		*val = ads1015_scale[idx].scale;
+		*val2 = ads1015_scale[idx].uscale;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		idx = data->channel_data[chan->address].data_rate;
+		*val = ads1015_data_rate[idx];
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	mutex_unlock(&data->lock);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ads1015_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int val,
+			     int val2, long mask)
+{
+	struct ads1015_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = ads1015_set_scale(data, chan->address, val, val2);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = ads1015_set_data_rate(data, chan->address, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int ads1015_buffer_preenable(struct iio_dev *indio_dev)
+{
+	return ads1015_set_power_state(iio_priv(indio_dev), true);
+}
+
+static int ads1015_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	return ads1015_set_power_state(iio_priv(indio_dev), false);
+}
+
+static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = {
+	.preenable	= ads1015_buffer_preenable,
+	.postenable	= iio_triggered_buffer_postenable,
+	.predisable	= iio_triggered_buffer_predisable,
+	.postdisable	= ads1015_buffer_postdisable,
+	.validate_scan_mask = &iio_validate_scan_mask_onehot,
+};
+
+static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125");
+static IIO_CONST_ATTR(sampling_frequency_available,
+		      "128 250 490 920 1600 2400 3300");
+
+static struct attribute *ads1015_attributes[] = {
+	&iio_const_attr_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ads1015_attribute_group = {
+	.attrs = ads1015_attributes,
+};
+
+static const struct iio_info ads1015_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= ads1015_read_raw,
+	.write_raw	= ads1015_write_raw,
+	.attrs		= &ads1015_attribute_group,
+};
+
+#ifdef CONFIG_OF
+static int ads1015_get_channels_config_of(struct i2c_client *client)
+{
+	struct ads1015_data *data = i2c_get_clientdata(client);
+	struct device_node *node;
+
+	if (!client->dev.of_node ||
+	    !of_get_next_child(client->dev.of_node, NULL))
+		return -EINVAL;
+
+	for_each_child_of_node(client->dev.of_node, node) {
+		u32 pval;
+		unsigned int channel;
+		unsigned int pga = ADS1015_DEFAULT_PGA;
+		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
+
+		if (of_property_read_u32(node, "reg", &pval)) {
+			dev_err(&client->dev, "invalid reg on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		channel = pval;
+		if (channel >= ADS1015_CHANNELS) {
+			dev_err(&client->dev,
+				"invalid channel index %d on %s\n",
+				channel, node->full_name);
+			continue;
+		}
+
+		if (!of_property_read_u32(node, "ti,gain", &pval)) {
+			pga = pval;
+			if (pga > 6) {
+				dev_err(&client->dev, "invalid gain on %s\n",
+					node->full_name);
+				return -EINVAL;
+			}
+		}
+
+		if (!of_property_read_u32(node, "ti,datarate", &pval)) {
+			data_rate = pval;
+			if (data_rate > 7) {
+				dev_err(&client->dev,
+					"invalid data_rate on %s\n",
+					node->full_name);
+				return -EINVAL;
+			}
+		}
+
+		data->channel_data[channel].pga = pga;
+		data->channel_data[channel].data_rate = data_rate;
+	}
+
+	return 0;
+}
+#endif
+
+static void ads1015_get_channels_config(struct i2c_client *client)
+{
+	unsigned int k;
+
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
+	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
+
+	/* prefer platform data */
+	if (pdata) {
+		memcpy(data->channel_data, pdata->channel_data,
+		       sizeof(data->channel_data));
+		return;
+	}
+
+#ifdef CONFIG_OF
+	if (!ads1015_get_channels_config_of(client))
+		return;
+#endif
+	/* fallback on default configuration */
+	for (k = 0; k < ADS1015_CHANNELS; ++k) {
+		data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
+		data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
+	}
+}
+
+static int ads1015_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct ads1015_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ads1015_info;
+	indio_dev->name = ADS1015_DRV_NAME;
+	indio_dev->channels = ads1015_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads1015_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* we need to keep this ABI the same as used by hwmon ADS1015 driver */
+	ads1015_get_channels_config(client);
+
+	data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "Failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ads1015_trigger_handler,
+					 &ads1015_buffer_setup_ops);
+	if (ret < 0) {
+		dev_err(&client->dev, "iio triggered buffer setup failed\n");
+		return ret;
+	}
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto err_buffer_cleanup;
+	pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+	pm_runtime_enable(&client->dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register IIO device\n");
+		goto err_buffer_cleanup;
+	}
+
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static int ads1015_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	/* power down single shot mode */
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+}
+
+#ifdef CONFIG_PM
+static int ads1015_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+}
+
+static int ads1015_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
+}
+#endif
+
+static const struct dev_pm_ops ads1015_pm_ops = {
+	SET_RUNTIME_PM_OPS(ads1015_runtime_suspend,
+			   ads1015_runtime_resume, NULL)
+};
+
+static const struct i2c_device_id ads1015_id[] = {
+	{"ads1015", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ads1015_id);
+
+static struct i2c_driver ads1015_driver = {
+	.driver = {
+		.name = ADS1015_DRV_NAME,
+		.pm = &ads1015_pm_ops,
+	},
+	.probe		= ads1015_probe,
+	.remove		= ads1015_remove,
+	.id_table	= ads1015_id,
+};
+
+module_i2c_driver(ads1015_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver");
+MODULE_LICENSE("GPL v2");