diff options
author | Magnus Damm <damm+renesas@opensource.se> | 2014-12-03 21:18:03 +0900 |
---|---|---|
committer | Thomas Gleixner <tglx@linutronix.de> | 2015-01-26 11:38:22 +0100 |
commit | e03f9088e22ca7e2b0de826466540e2527518e52 (patch) | |
tree | 78e192dab008ea8852d9fb57836338d160ed96af /drivers/irqchip | |
parent | 64c96a57b73397415eafa4ac2020ea7d99d7168c (diff) | |
download | linux-stable-e03f9088e22ca7e2b0de826466540e2527518e52.tar.gz linux-stable-e03f9088e22ca7e2b0de826466540e2527518e52.tar.bz2 linux-stable-e03f9088e22ca7e2b0de826466540e2527518e52.zip |
irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support
Add r8a7779 specific support for IRLM bit configuration
in the INTC-IRQPIN driver. Without this code we need
special workaround code in arch/arm/mach-shmobile.
The IRLM bit for the INTC hardware exists on various
older SH-based SoCs and is used to select between two
modes for the external interrupt pins IRQ0 to IRQ3:
IRLM = 0: (default from reset on r8a7779)
In this mode the pins IRQ0 to IRQ3 are used together
to give a value between 0 and 15 to the SoC. External
logic is required for masking. This mode is not
supported by the INTC-IRQPIN driver.
IRLM = 1: (needs this patch or configuration elsewhere)
In this mode IRQ0 to IRQ3 operate as 4 individual
external interrupt pins. In this mode the SMSC ethernet
chip can be used via IRQ1 on r8a7779 Marzen. This mode
is the only supported mode by the INTC-IRQPIN driver.
For this patch to work the r8a7779 DTS needs to pass
the ICR0 register as the last register bank.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: horms@verge.net.au
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/irqchip')
-rw-r--r-- | drivers/irqchip/irq-renesas-intc-irqpin.c | 50 |
1 files changed, 41 insertions, 9 deletions
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c index 078cac5e2d08..9a0767b9c89d 100644 --- a/drivers/irqchip/irq-renesas-intc-irqpin.c +++ b/drivers/irqchip/irq-renesas-intc-irqpin.c @@ -30,6 +30,7 @@ #include <linux/err.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_data/irq-renesas-intc-irqpin.h> #include <linux/pm_runtime.h> @@ -40,7 +41,9 @@ #define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */ #define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */ #define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */ -#define INTC_IRQPIN_REG_NR 5 +#define INTC_IRQPIN_REG_NR_MANDATORY 5 +#define INTC_IRQPIN_REG_IRLM 5 /* ICR0 with IRLM bit (optional) */ +#define INTC_IRQPIN_REG_NR 6 /* INTC external IRQ PIN hardware register access: * @@ -82,6 +85,10 @@ struct intc_irqpin_priv { u8 shared_irq_mask; }; +struct intc_irqpin_irlm_config { + unsigned int irlm_bit; +}; + static unsigned long intc_irqpin_read32(void __iomem *iomem) { return ioread32(iomem); @@ -345,10 +352,23 @@ static struct irq_domain_ops intc_irqpin_irq_domain_ops = { .xlate = irq_domain_xlate_twocell, }; +static const struct intc_irqpin_irlm_config intc_irqpin_irlm_r8a7779 = { + .irlm_bit = 23, /* ICR0.IRLM0 */ +}; + +static const struct of_device_id intc_irqpin_dt_ids[] = { + { .compatible = "renesas,intc-irqpin", }, + { .compatible = "renesas,intc-irqpin-r8a7779", + .data = &intc_irqpin_irlm_r8a7779 }, + {}, +}; +MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids); + static int intc_irqpin_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct renesas_intc_irqpin_config *pdata = dev->platform_data; + const struct of_device_id *of_id; struct intc_irqpin_priv *p; struct intc_irqpin_iomem *i; struct resource *io[INTC_IRQPIN_REG_NR]; @@ -391,10 +411,11 @@ static int intc_irqpin_probe(struct platform_device *pdev) pm_runtime_enable(dev); pm_runtime_get_sync(dev); - /* get hold of manadatory IOMEM */ + /* get hold of register banks */ + memset(io, 0, sizeof(io)); for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k); - if (!io[k]) { + if (!io[k] && k < INTC_IRQPIN_REG_NR_MANDATORY) { dev_err(dev, "not enough IOMEM resources\n"); ret = -EINVAL; goto err0; @@ -422,6 +443,10 @@ static int intc_irqpin_probe(struct platform_device *pdev) for (k = 0; k < INTC_IRQPIN_REG_NR; k++) { i = &p->iomem[k]; + /* handle optional registers */ + if (!io[k]) + continue; + switch (resource_size(io[k])) { case 1: i->width = 8; @@ -448,6 +473,19 @@ static int intc_irqpin_probe(struct platform_device *pdev) } } + /* configure "individual IRQ mode" where needed */ + of_id = of_match_device(intc_irqpin_dt_ids, dev); + if (of_id && of_id->data) { + const struct intc_irqpin_irlm_config *irlm_config = of_id->data; + + if (io[INTC_IRQPIN_REG_IRLM]) + intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_IRLM, + irlm_config->irlm_bit, + 1, 1); + else + dev_warn(dev, "unable to select IRLM mode\n"); + } + /* mask all interrupts using priority */ for (k = 0; k < p->number_of_irqs; k++) intc_irqpin_mask_unmask_prio(p, k, 1); @@ -550,12 +588,6 @@ static int intc_irqpin_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id intc_irqpin_dt_ids[] = { - { .compatible = "renesas,intc-irqpin", }, - {}, -}; -MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids); - static struct platform_driver intc_irqpin_device_driver = { .probe = intc_irqpin_probe, .remove = intc_irqpin_remove, |