Merge branch 'smp' into misc

Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/mm/ioremap.c

1 files changed, 1069 insertions, 0 deletions

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
new file mode 100644
index 000000000000..0cc4ead2fd8b
--- /dev/null
+++ b/drivers/leds/leds-lp5523.c
@@ -0,0 +1,1069 @@
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE		0x00
+#define LP5523_REG_OP_MODE		0x01
+#define LP5523_REG_RATIOMETRIC_MSB	0x02
+#define LP5523_REG_RATIOMETRIC_LSB	0x03
+#define LP5523_REG_ENABLE_LEDS_MSB	0x04
+#define LP5523_REG_ENABLE_LEDS_LSB	0x05
+#define LP5523_REG_LED_CNTRL_BASE	0x06
+#define LP5523_REG_LED_PWM_BASE		0x16
+#define LP5523_REG_LED_CURRENT_BASE	0x26
+#define LP5523_REG_CONFIG		0x36
+#define LP5523_REG_CHANNEL1_PC		0x37
+#define LP5523_REG_CHANNEL2_PC		0x38
+#define LP5523_REG_CHANNEL3_PC		0x39
+#define LP5523_REG_STATUS		0x3a
+#define LP5523_REG_GPO			0x3b
+#define LP5523_REG_VARIABLE		0x3c
+#define LP5523_REG_RESET		0x3d
+#define LP5523_REG_TEMP_CTRL		0x3e
+#define LP5523_REG_TEMP_READ		0x3f
+#define LP5523_REG_TEMP_WRITE		0x40
+#define LP5523_REG_LED_TEST_CTRL	0x41
+#define LP5523_REG_LED_TEST_ADC		0x42
+#define LP5523_REG_ENG1_VARIABLE	0x45
+#define LP5523_REG_ENG2_VARIABLE	0x46
+#define LP5523_REG_ENG3_VARIABLE	0x47
+#define LP5523_REG_MASTER_FADER1	0x48
+#define LP5523_REG_MASTER_FADER2	0x49
+#define LP5523_REG_MASTER_FADER3	0x4a
+#define LP5523_REG_CH1_PROG_START	0x4c
+#define LP5523_REG_CH2_PROG_START	0x4d
+#define LP5523_REG_CH3_PROG_START	0x4e
+#define LP5523_REG_PROG_PAGE_SEL	0x4f
+#define LP5523_REG_PROG_MEM		0x50
+
+#define LP5523_CMD_LOAD			0x15 /* 00010101 */
+#define LP5523_CMD_RUN			0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED		0x00 /* 00000000 */
+
+#define LP5523_ENABLE			0x40
+#define LP5523_AUTO_INC			0x40
+#define LP5523_PWR_SAVE			0x20
+#define LP5523_PWM_PWR_SAVE		0x04
+#define LP5523_CP_1			0x08
+#define LP5523_CP_1_5			0x10
+#define LP5523_CP_AUTO			0x18
+#define LP5523_INT_CLK			0x01
+#define LP5523_AUTO_CLK			0x02
+#define LP5523_EN_LEDTEST		0x80
+#define LP5523_LEDTEST_DONE		0x80
+
+#define LP5523_DEFAULT_CURRENT		50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH		32 /* in bytes */
+#define LP5523_PROGRAM_PAGES		6
+#define LP5523_ADC_SHORTCIRC_LIM	80
+
+#define LP5523_LEDS			9
+#define LP5523_ENGINES			3
+
+#define LP5523_ENG_MASK_BASE		0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK          0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS                IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED		0x08
+
+#define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id)			(((id) - 1) * 2)
+
+struct lp5523_engine {
+	const struct attribute_group *attributes;
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		mux_page;
+	u16		led_mux;
+	u8		engine_mask;
+};
+
+struct lp5523_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev     cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5523_chip {
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5523_engine	engines[LP5523_ENGINES];
+	struct lp5523_led	leds[LP5523_LEDS];
+	struct lp5523_platform_data *pdata;
+	u8			num_channels;
+	u8			num_leds;
+};
+
+static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5523_led, cdev);
+}
+
+static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+	return container_of(engine, struct lp5523_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+	return container_of(led, struct lp5523_chip,
+			    leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+	if (ret)
+		return ret;
+	ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf == 0x40)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int ret = 0;
+	u8 status;
+
+	/* one pattern per engine setting led mux start and stop addresses */
+	u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
+		{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+	};
+
+	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+	usleep_range(1000, 2000);
+
+	ret |= lp5523_write(client, LP5523_REG_CONFIG,
+			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
+			    LP5523_CP_AUTO | LP5523_AUTO_CLK |
+			    LP5523_PWM_PWR_SAVE);
+
+	/* turn on all leds */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+	/* hardcode 32 bytes of memory for each engine from program memory */
+	ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+	ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+	ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+	/* write led mux address space for each channel */
+	ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+	ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+	ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+	if (ret) {
+		dev_err(&client->dev, "could not load mux programs\n");
+		return -1;
+	}
+
+	/* set all engines exec state and mode to run 00101010 */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE,
+			    (LP5523_CMD_RUN | LP5523_ENABLE));
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+	if (ret) {
+		dev_err(&client->dev, "could not start mux programs\n");
+		return -1;
+	}
+
+	/* Let the programs run for couple of ms and check the engine status */
+	usleep_range(3000, 6000);
+	lp5523_read(client, LP5523_REG_STATUS, &status);
+	status &= LP5523_ENG_STATUS_MASK;
+
+	if (status == LP5523_ENG_STATUS_MASK) {
+		dev_dbg(&client->dev, "all engines configured\n");
+	} else {
+		dev_info(&client->dev, "status == %x\n", status);
+		dev_err(&client->dev, "cound not configure LED engine\n");
+		return -1;
+	}
+
+	dev_info(&client->dev, "disabling engines\n");
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+	return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+	if (ret)
+		goto fail;
+
+	engine_state &= ~(engine->engine_mask);
+
+	/* set mode only for this engine */
+	mode &= engine->engine_mask;
+
+	engine_state |= mode;
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+	return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+			    (u8)(mux >> 8));
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+	engine->led_mux = mux;
+
+	return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+			    engine->prog_page);
+	ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+					      LP5523_PROGRAM_LENGTH, pattern);
+
+	return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE,
+					LP5523_CMD_RUN | LP5523_ENABLE);
+	if (ret)
+		goto fail;
+
+	ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+	return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+	int i;
+	u16 tmp_mux = 0;
+	len = len < LP5523_LEDS ? len : LP5523_LEDS;
+	for (i = 0; i < len; i++) {
+		switch (buf[i]) {
+		case '1':
+			tmp_mux |= (1 << i);
+			break;
+		case '0':
+			break;
+		case '\n':
+			i = len;
+			break;
+		default:
+			return -1;
+		}
+	}
+	*mux = tmp_mux;
+
+	return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+	int i, pos = 0;
+	for (i = 0; i < LP5523_LEDS; i++)
+		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+	array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/*			Sysfs interface				*/
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	char mux[LP5523_LEDS + 1];
+
+	lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+	return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr)							\
+static ssize_t show_engine##nr##_leds(struct device *dev,		\
+			    struct device_attribute *attr,		\
+			    char *buf)					\
+{									\
+	return show_engine_leds(dev, attr, buf, nr);			\
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	u16 mux = 0;
+
+	if (lp5523_mux_parse(buf, &mux, len))
+		return -EINVAL;
+
+	if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+		return -EINVAL;
+
+	return len;
+}
+
+#define store_leds(nr)						\
+static ssize_t store_engine##nr##_leds(struct device *dev,	\
+			     struct device_attribute *attr,	\
+			     const char *buf, size_t len)	\
+{								\
+	return store_engine_leds(dev, attr, buf, len, nr);	\
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i, ret, pos = 0;
+	int led = 0;
+	u8 status, adc, vdd;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (ret < 0)
+		goto fail;
+
+	/* Check that ext clock is really in use if requested */
+	if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+		if  ((status & LP5523_EXT_CLK_USED) == 0)
+			goto fail;
+
+	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+				    LP5523_EN_LEDTEST | 16);
+	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (!(status & LP5523_LEDTEST_DONE))
+		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
+
+	ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+	vdd--;	/* There may be some fluctuation in measurement */
+
+	for (i = 0; i < LP5523_LEDS; i++) {
+		/* Skip non-existing channels */
+		if (chip->pdata->led_config[i].led_current == 0)
+			continue;
+
+		/* Set default current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->pdata->led_config[i].led_current);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+		/* let current stabilize 2 - 4ms before measurements start */
+		usleep_range(2000, 4000);
+		lp5523_write(chip->client,
+			     LP5523_REG_LED_TEST_CTRL,
+			     LP5523_EN_LEDTEST | i);
+		/* ADC conversion time is 2.7 ms typically */
+		usleep_range(3000, 6000);
+		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+		if (!(status & LP5523_LEDTEST_DONE))
+			usleep_range(3000, 6000);/* Was not ready. Wait. */
+		ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+			pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+		/* Restore current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->leds[led].led_current);
+		led++;
+	}
+	if (pos == 0)
+		pos = sprintf(buf, "OK\n");
+	goto release_lock;
+fail:
+	pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+	mutex_unlock(&chip->lock);
+
+	return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5523_led *led = cdev_to_led(cdev);
+
+	led->brightness = (u8)brightness;
+
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+	struct lp5523_led *led = container_of(work,
+					      struct lp5523_led,
+					      brightness_work);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+
+	lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+		     led->brightness);
+
+	mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_load_program(engine, pattern);
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5523_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5523_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5523_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct lp5523_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5523_set_mode(engine, LP5523_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5523_set_mode(engine, LP5523_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (strict_strtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+			(u8)curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+	.attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+		   show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+		   show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+		   show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+	&dev_attr_engine1_load.attr,
+	&dev_attr_engine1_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+	&dev_attr_engine2_load.attr,
+	&dev_attr_engine2_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+	&dev_attr_engine3_load.attr,
+	&dev_attr_engine3_leds.attr,
+	NULL
+};
+
+static const struct attribute_group lp5523_group = {
+	.attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+	{.attrs = lp5523_engine1_attributes },
+	{.attrs = lp5523_engine2_attributes },
+	{.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int ret;
+
+	ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+		if (chip->engines[i].mode == LP5523_CMD_LOAD)
+			sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/*			Set chip operating mode			*/
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+	/*  engine to chip */
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	struct device *dev = &client->dev;
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5523_CMD_RUN)
+		return 0;
+
+	if (mode == LP5523_CMD_RUN) {
+		ret = lp5523_run_program(engine);
+	} else if (mode == LP5523_CMD_LOAD) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+		lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+		ret = sysfs_create_group(&dev->kobj, engine->attributes);
+		if (ret)
+			return ret;
+	} else if (mode == LP5523_CMD_DISABLED) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+	}
+
+	/* remove load attribute from sysfs if not in load mode */
+	if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+		sysfs_remove_group(&dev->kobj, engine->attributes);
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+/*--------------------------------------------------------------*/
+/*			Probe, Attach, Remove			*/
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+	if (id < 1 || id > LP5523_ENGINES)
+		return -1;
+	engine->id = id;
+	engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+	engine->prog_page = id - 1;
+	engine->mux_page = id + 2;
+	engine->attributes = &lp5523_engine_group[id - 1];
+
+	return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+			   int chan, struct lp5523_platform_data *pdata)
+{
+	char name[32];
+	int res;
+
+	if (chan >= LP5523_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current) {
+		led->led_current = pdata->led_config[chan].led_current;
+		led->max_current = pdata->led_config[chan].max_current;
+		led->chan_nr = pdata->led_config[chan].chan_nr;
+
+		if (led->chan_nr >= LP5523_LEDS) {
+			dev_err(dev, "Use channel numbers between 0 and %d\n",
+				LP5523_LEDS - 1);
+			return -EINVAL;
+		}
+
+		snprintf(name, 32, "lp5523:channel%d", chan);
+
+		led->cdev.name = name;
+		led->cdev.brightness_set = lp5523_set_brightness;
+		res = led_classdev_register(dev, &led->cdev);
+		if (res < 0) {
+			dev_err(dev, "couldn't register led on channel %d\n",
+				chan);
+			return res;
+		}
+		res = sysfs_create_group(&led->cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+		if (res < 0) {
+			dev_err(dev, "couldn't register current attribute\n");
+			led_classdev_unregister(&led->cdev);
+			return res;
+		}
+	} else {
+		led->led_current = 0;
+	}
+	return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5523_chip		*chip;
+	struct lp5523_platform_data	*pdata;
+	int ret, i, led;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
+	ret = lp5523_detect(client);
+	if (ret)
+		goto fail2;
+
+	dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+	/* Initialize engines */
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		ret = lp5523_init_engine(&chip->engines[i], i + 1);
+		if (ret) {
+			dev_err(&client->dev, "error initializing engine\n");
+			goto fail2;
+		}
+	}
+	ret = lp5523_configure(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set LED current */
+		lp5523_write(client,
+			  LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+			  chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5523_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5523_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5523_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+	{ "lp5523", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+	.driver = {
+		.name	= "lp5523",
+	},
+	.probe		= lp5523_probe,
+	.remove		= lp5523_remove,
+	.id_table	= lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lp5523_driver);
+
+	if (ret < 0)
+		printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+	return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+	i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");