md/r5cache: caching phase of r5cache

As described in previous patch, write back cache operates in two
phases: caching and writing-out. The caching phase works as:
1. write data to journal
   (r5c_handle_stripe_dirtying, r5c_cache_data)
2. call bio_endio
   (r5c_handle_data_cached, r5c_return_dev_pending_writes).

Then the writing-out phase is as:
1. Mark the stripe as write-out (r5c_make_stripe_write_out)
2. Calcualte parity (reconstruct or RMW)
3. Write parity (and maybe some other data) to journal device
4. Write data and parity to RAID disks

This patch implements caching phase. The cache is integrated with
stripe cache of raid456. It leverages code of r5l_log to write
data to journal device.

Writing-out phase of the cache is implemented in the next patch.

With r5cache, write operation does not wait for parity calculation
and write out, so the write latency is lower (1 write to journal
device vs. read and then write to raid disks). Also, r5cache will
reduce RAID overhead (multipile IO due to read-modify-write of
parity) and provide more opportunities of full stripe writes.

This patch adds 2 flags to stripe_head.state:
 - STRIPE_R5C_PARTIAL_STRIPE,
 - STRIPE_R5C_FULL_STRIPE,

Instead of inactive_list, stripes with cached data are tracked in
r5conf->r5c_full_stripe_list and r5conf->r5c_partial_stripe_list.
STRIPE_R5C_FULL_STRIPE and STRIPE_R5C_PARTIAL_STRIPE are flags for
stripes in these lists. Note: stripes in r5c_full/partial_stripe_list
are not considered as "active".

For RMW, the code allocates an extra page for each data block
being updated.  This is stored in r5dev->orig_page and the old data
is read into it.  Then the prexor calculation subtracts ->orig_page
from the parity block, and the reconstruct calculation adds the
->page data back into the parity block.

r5cache naturally excludes SkipCopy. When the array has write back
cache, async_copy_data() will not skip copy.

There are some known limitations of the cache implementation:

1. Write cache only covers full page writes (R5_OVERWRITE). Writes
   of smaller granularity are write through.
2. Only one log io (sh->log_io) for each stripe at anytime. Later
   writes for the same stripe have to wait. This can be improved by
   moving log_io to r5dev.
3. With writeback cache, read path must enter state machine, which
   is a significant bottleneck for some workloads.
4. There is no per stripe checkpoint (with r5l_payload_flush) in
   the log, so recovery code has to replay more than necessary data
   (sometimes all the log from last_checkpoint). This reduces
   availability of the array.

This patch includes a fix proposed by ZhengYuan Liu
<liuzhengyuan@kylinos.cn>

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>

1 files changed, 233 insertions, 9 deletions

diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c
index 02a554434747..19c5af91bd1b 100644
--- a/drivers/md/raid5-cache.c
+++ b/drivers/md/raid5-cache.c
@@ -20,6 +20,7 @@
 #include <linux/random.h>
 #include "md.h"
 #include "raid5.h"
+#include "bitmap.h"
 
 /*
  * metadata/data stored in disk with 4k size unit (a block) regardless
@@ -218,6 +219,43 @@ static void __r5l_set_io_unit_state(struct r5l_io_unit *io,
 	io->state = state;
 }
 
+static void
+r5c_return_dev_pending_writes(struct r5conf *conf, struct r5dev *dev,
+			      struct bio_list *return_bi)
+{
+	struct bio *wbi, *wbi2;
+
+	wbi = dev->written;
+	dev->written = NULL;
+	while (wbi && wbi->bi_iter.bi_sector <
+	       dev->sector + STRIPE_SECTORS) {
+		wbi2 = r5_next_bio(wbi, dev->sector);
+		if (!raid5_dec_bi_active_stripes(wbi)) {
+			md_write_end(conf->mddev);
+			bio_list_add(return_bi, wbi);
+		}
+		wbi = wbi2;
+	}
+}
+
+void r5c_handle_cached_data_endio(struct r5conf *conf,
+	  struct stripe_head *sh, int disks, struct bio_list *return_bi)
+{
+	int i;
+
+	for (i = sh->disks; i--; ) {
+		if (sh->dev[i].written) {
+			set_bit(R5_UPTODATE, &sh->dev[i].flags);
+			r5c_return_dev_pending_writes(conf, &sh->dev[i],
+						      return_bi);
+			bitmap_endwrite(conf->mddev->bitmap, sh->sector,
+					STRIPE_SECTORS,
+					!test_bit(STRIPE_DEGRADED, &sh->state),
+					0);
+		}
+	}
+}
+
 /*
  * Put the stripe into writing-out phase by clearing STRIPE_R5C_CACHING.
  * This function should only be called in write-back mode.
@@ -231,6 +269,44 @@ static void r5c_make_stripe_write_out(struct stripe_head *sh)
 
 	WARN_ON(!test_bit(STRIPE_R5C_CACHING, &sh->state));
 	clear_bit(STRIPE_R5C_CACHING, &sh->state);
+
+	if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+		atomic_inc(&conf->preread_active_stripes);
+
+	if (test_and_clear_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state)) {
+		BUG_ON(atomic_read(&conf->r5c_cached_partial_stripes) == 0);
+		atomic_dec(&conf->r5c_cached_partial_stripes);
+	}
+
+	if (test_and_clear_bit(STRIPE_R5C_FULL_STRIPE, &sh->state)) {
+		BUG_ON(atomic_read(&conf->r5c_cached_full_stripes) == 0);
+		atomic_dec(&conf->r5c_cached_full_stripes);
+	}
+}
+
+static void r5c_handle_data_cached(struct stripe_head *sh)
+{
+	int i;
+
+	for (i = sh->disks; i--; )
+		if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) {
+			set_bit(R5_InJournal, &sh->dev[i].flags);
+			clear_bit(R5_LOCKED, &sh->dev[i].flags);
+		}
+	clear_bit(STRIPE_LOG_TRAPPED, &sh->state);
+}
+
+/*
+ * this journal write must contain full parity,
+ * it may also contain some data pages
+ */
+static void r5c_handle_parity_cached(struct stripe_head *sh)
+{
+	int i;
+
+	for (i = sh->disks; i--; )
+		if (test_bit(R5_InJournal, &sh->dev[i].flags))
+			set_bit(R5_Wantwrite, &sh->dev[i].flags);
 }
 
 /*
@@ -250,8 +326,12 @@ static void r5c_finish_cache_stripe(struct stripe_head *sh)
 		 * two parities are written out together.
 		 */
 		set_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags);
-	} else
-		BUG(); /* write-back logic in next patch */
+	} else if (test_bit(STRIPE_R5C_CACHING, &sh->state)) {
+		r5c_handle_data_cached(sh);
+	} else {
+		r5c_handle_parity_cached(sh);
+		set_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags);
+	}
 }
 
 static void r5l_io_run_stripes(struct r5l_io_unit *io)
@@ -491,7 +571,8 @@ static int r5l_log_stripe(struct r5l_log *log, struct stripe_head *sh,
 	io = log->current_io;
 
 	for (i = 0; i < sh->disks; i++) {
-		if (!test_bit(R5_Wantwrite, &sh->dev[i].flags))
+		if (!test_bit(R5_Wantwrite, &sh->dev[i].flags) ||
+		    test_bit(R5_InJournal, &sh->dev[i].flags))
 			continue;
 		if (i == sh->pd_idx || i == sh->qd_idx)
 			continue;
@@ -550,8 +631,10 @@ int r5l_write_stripe(struct r5l_log *log, struct stripe_head *sh)
 	for (i = 0; i < sh->disks; i++) {
 		void *addr;
 
-		if (!test_bit(R5_Wantwrite, &sh->dev[i].flags))
+		if (!test_bit(R5_Wantwrite, &sh->dev[i].flags) ||
+		    test_bit(R5_InJournal, &sh->dev[i].flags))
 			continue;
+
 		write_disks++;
 		/* checksum is already calculated in last run */
 		if (test_bit(STRIPE_LOG_TRAPPED, &sh->state))
@@ -817,7 +900,6 @@ static void r5l_write_super_and_discard_space(struct r5l_log *log,
 	}
 }
 
-
 static void r5l_do_reclaim(struct r5l_log *log)
 {
 	sector_t reclaim_target = xchg(&log->reclaim_target, 0);
@@ -1218,12 +1300,80 @@ int r5c_try_caching_write(struct r5conf *conf,
 			  int disks)
 {
 	struct r5l_log *log = conf->log;
+	int i;
+	struct r5dev *dev;
+	int to_cache = 0;
 
 	BUG_ON(!r5c_is_writeback(log));
 
-	/* more write-back logic in next patches */
-	r5c_make_stripe_write_out(sh);
-	return -EAGAIN;
+	if (!test_bit(STRIPE_R5C_CACHING, &sh->state)) {
+		/*
+		 * There are two different scenarios here:
+		 *  1. The stripe has some data cached, and it is sent to
+		 *     write-out phase for reclaim
+		 *  2. The stripe is clean, and this is the first write
+		 *
+		 * For 1, return -EAGAIN, so we continue with
+		 * handle_stripe_dirtying().
+		 *
+		 * For 2, set STRIPE_R5C_CACHING and continue with caching
+		 * write.
+		 */
+
+		/* case 1: anything injournal or anything in written */
+		if (s->injournal > 0 || s->written > 0)
+			return -EAGAIN;
+		/* case 2 */
+		set_bit(STRIPE_R5C_CACHING, &sh->state);
+	}
+
+	for (i = disks; i--; ) {
+		dev = &sh->dev[i];
+		/* if non-overwrite, use writing-out phase */
+		if (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags) &&
+		    !test_bit(R5_InJournal, &dev->flags)) {
+			r5c_make_stripe_write_out(sh);
+			return -EAGAIN;
+		}
+	}
+
+	for (i = disks; i--; ) {
+		dev = &sh->dev[i];
+		if (dev->towrite) {
+			set_bit(R5_Wantwrite, &dev->flags);
+			set_bit(R5_Wantdrain, &dev->flags);
+			set_bit(R5_LOCKED, &dev->flags);
+			to_cache++;
+		}
+	}
+
+	if (to_cache) {
+		set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+		/*
+		 * set STRIPE_LOG_TRAPPED, which triggers r5c_cache_data()
+		 * in ops_run_io(). STRIPE_LOG_TRAPPED will be cleared in
+		 * r5c_handle_data_cached()
+		 */
+		set_bit(STRIPE_LOG_TRAPPED, &sh->state);
+	}
+
+	return 0;
+}
+
+/*
+ * free extra pages (orig_page) we allocated for prexor
+ */
+void r5c_release_extra_page(struct stripe_head *sh)
+{
+	int i;
+
+	for (i = sh->disks; i--; )
+		if (sh->dev[i].page != sh->dev[i].orig_page) {
+			struct page *p = sh->dev[i].orig_page;
+
+			sh->dev[i].orig_page = sh->dev[i].page;
+			put_page(p);
+		}
 }
 
 /*
@@ -1234,6 +1384,9 @@ void r5c_finish_stripe_write_out(struct r5conf *conf,
 				 struct stripe_head *sh,
 				 struct stripe_head_state *s)
 {
+	int i;
+	int do_wakeup = 0;
+
 	if (!conf->log ||
 	    !test_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags))
 		return;
@@ -1243,7 +1396,78 @@ void r5c_finish_stripe_write_out(struct r5conf *conf,
 
 	if (conf->log->r5c_journal_mode == R5C_JOURNAL_MODE_WRITE_THROUGH)
 		return;
-	BUG();  /* write-back logic in following patches */
+
+	for (i = sh->disks; i--; ) {
+		clear_bit(R5_InJournal, &sh->dev[i].flags);
+		if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
+			do_wakeup = 1;
+	}
+
+	/*
+	 * analyse_stripe() runs before r5c_finish_stripe_write_out(),
+	 * We updated R5_InJournal, so we also update s->injournal.
+	 */
+	s->injournal = 0;
+
+	if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
+		if (atomic_dec_and_test(&conf->pending_full_writes))
+			md_wakeup_thread(conf->mddev->thread);
+
+	if (do_wakeup)
+		wake_up(&conf->wait_for_overlap);
+}
+
+int
+r5c_cache_data(struct r5l_log *log, struct stripe_head *sh,
+	       struct stripe_head_state *s)
+{
+	int pages = 0;
+	int reserve;
+	int i;
+	int ret = 0;
+
+	BUG_ON(!log);
+
+	for (i = 0; i < sh->disks; i++) {
+		void *addr;
+
+		if (!test_bit(R5_Wantwrite, &sh->dev[i].flags))
+			continue;
+		addr = kmap_atomic(sh->dev[i].page);
+		sh->dev[i].log_checksum = crc32c_le(log->uuid_checksum,
+						    addr, PAGE_SIZE);
+		kunmap_atomic(addr);
+		pages++;
+	}
+	WARN_ON(pages == 0);
+
+	/*
+	 * The stripe must enter state machine again to call endio, so
+	 * don't delay.
+	 */
+	clear_bit(STRIPE_DELAYED, &sh->state);
+	atomic_inc(&sh->count);
+
+	mutex_lock(&log->io_mutex);
+	/* meta + data */
+	reserve = (1 + pages) << (PAGE_SHIFT - 9);
+	if (!r5l_has_free_space(log, reserve)) {
+		spin_lock(&log->no_space_stripes_lock);
+		list_add_tail(&sh->log_list, &log->no_space_stripes);
+		spin_unlock(&log->no_space_stripes_lock);
+
+		r5l_wake_reclaim(log, reserve);
+	} else {
+		ret = r5l_log_stripe(log, sh, pages, 0);
+		if (ret) {
+			spin_lock_irq(&log->io_list_lock);
+			list_add_tail(&sh->log_list, &log->no_mem_stripes);
+			spin_unlock_irq(&log->io_list_lock);
+		}
+	}
+
+	mutex_unlock(&log->io_mutex);
+	return 0;
 }