diff options
author | Hans Verkuil <hans.verkuil@cisco.com> | 2013-05-29 06:59:51 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-06-17 08:52:10 -0300 |
commit | e12771100c93e101a7a8b302b6c5d57cff7b1551 (patch) | |
tree | a831f1d64d92142e5ce4cbcdfcd5a6f623db04e9 /drivers/media/i2c/saa7115.c | |
parent | 6be89daa03a4c99b0d22a59a660b225a592ed0a9 (diff) | |
download | linux-stable-e12771100c93e101a7a8b302b6c5d57cff7b1551.tar.gz linux-stable-e12771100c93e101a7a8b302b6c5d57cff7b1551.tar.bz2 linux-stable-e12771100c93e101a7a8b302b6c5d57cff7b1551.zip |
[media] media/i2c: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/i2c/saa7115.c')
-rw-r--r-- | drivers/media/i2c/saa7115.c | 105 |
1 files changed, 48 insertions, 57 deletions
diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index 4daa81c55a82..90c43f3fb0f1 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -46,7 +46,6 @@ #include <linux/videodev2.h> #include <media/v4l2-device.h> #include <media/v4l2-ctrls.h> -#include <media/v4l2-chip-ident.h> #include <media/saa7115.h> #include <asm/div64.h> @@ -63,6 +62,16 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Debug level (0-1)"); +enum saa711x_model { + SAA7111A, + SAA7111, + SAA7113, + GM7113C, + SAA7114, + SAA7115, + SAA7118, +}; + struct saa711x_state { struct v4l2_subdev sd; struct v4l2_ctrl_handler hdl; @@ -80,7 +89,7 @@ struct saa711x_state { int radio; int width; int height; - u32 ident; + enum saa711x_model ident; u32 audclk_freq; u32 crystal_freq; bool ucgc; @@ -111,10 +120,10 @@ static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) /* Sanity routine to check if a register is present */ static int saa711x_has_reg(const int id, const u8 reg) { - if (id == V4L2_IDENT_SAA7111) + if (id == SAA7111) return reg < 0x20 && reg != 0x01 && reg != 0x0f && (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; - if (id == V4L2_IDENT_SAA7111A) + if (id == SAA7111A) return reg < 0x20 && reg != 0x01 && reg != 0x0f && reg != 0x14 && reg != 0x18 && reg != 0x19 && reg != 0x1d && reg != 0x1e; @@ -127,18 +136,18 @@ static int saa711x_has_reg(const int id, const u8 reg) return 0; switch (id) { - case V4L2_IDENT_GM7113C: + case GM7113C: return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20; - case V4L2_IDENT_SAA7113: + case SAA7113: return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && reg != 0x5d && reg < 0x63; - case V4L2_IDENT_SAA7114: + case SAA7114: return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && reg != 0x81 && reg < 0xf0; - case V4L2_IDENT_SAA7115: + case SAA7115: return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); - case V4L2_IDENT_SAA7118: + case SAA7118: return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; @@ -955,14 +964,14 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. if (std & V4L2_STD_525_60) { v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); - if (state->ident == V4L2_IDENT_GM7113C) + if (state->ident == GM7113C) saa711x_writeregs(sd, gm7113c_cfg_60hz_video); else saa711x_writeregs(sd, saa7115_cfg_60hz_video); saa711x_set_size(sd, 720, 480); } else { v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); - if (state->ident == V4L2_IDENT_GM7113C) + if (state->ident == GM7113C) saa711x_writeregs(sd, gm7113c_cfg_50hz_video); else saa711x_writeregs(sd, saa7115_cfg_50hz_video); @@ -978,8 +987,8 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) 011 NTSC N (3.58MHz) PAL M (3.58MHz) 100 reserved NTSC-Japan (3.58MHz) */ - if (state->ident <= V4L2_IDENT_SAA7113 || - state->ident == V4L2_IDENT_GM7113C) { + if (state->ident <= SAA7113 || + state->ident == GM7113C) { u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; if (std == V4L2_STD_PAL_M) { @@ -998,9 +1007,8 @@ static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) /* restart task B if needed */ int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; - if (taskb && state->ident == V4L2_IDENT_SAA7114) { + if (taskb && state->ident == SAA7114) saa711x_writeregs(sd, saa7115_cfg_vbi_on); - } /* switch audio mode too! */ saa711x_s_clock_freq(sd, state->audclk_freq); @@ -1022,7 +1030,7 @@ static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_forma #else /* SAA7113 and SAA7118 also should support VBI - Need testing */ - if (state->ident != V4L2_IDENT_SAA7115) + if (state->ident != SAA7115) return; #endif @@ -1244,14 +1252,14 @@ static int saa711x_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, u32 config) { struct saa711x_state *state = to_state(sd); - u8 mask = (state->ident <= V4L2_IDENT_SAA7111A) ? 0xf8 : 0xf0; + u8 mask = (state->ident <= SAA7111A) ? 0xf8 : 0xf0; v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", input, output); /* saa7111/3 does not have these inputs */ - if ((state->ident <= V4L2_IDENT_SAA7113 || - state->ident == V4L2_IDENT_GM7113C) && + if ((state->ident <= SAA7113 || + state->ident == GM7113C) && (input == SAA7115_COMPOSITE4 || input == SAA7115_COMPOSITE5)) { return -EINVAL; @@ -1266,7 +1274,7 @@ static int saa711x_s_routing(struct v4l2_subdev *sd, state->input = input; /* saa7111 has slightly different input numbering */ - if (state->ident <= V4L2_IDENT_SAA7111A) { + if (state->ident <= SAA7111A) { if (input >= SAA7115_COMPOSITE4) input -= 2; /* saa7111 specific */ @@ -1289,13 +1297,13 @@ static int saa711x_s_routing(struct v4l2_subdev *sd, (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); state->output = output; - if (state->ident == V4L2_IDENT_SAA7114 || - state->ident == V4L2_IDENT_SAA7115) { + if (state->ident == SAA7114 || + state->ident == SAA7115) { saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | (state->output & 0x01)); } - if (state->ident > V4L2_IDENT_SAA7111A) { + if (state->ident > SAA7111A) { if (config & SAA7115_IDQ_IS_DEFAULT) saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20); else @@ -1308,7 +1316,7 @@ static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) { struct saa711x_state *state = to_state(sd); - if (state->ident > V4L2_IDENT_SAA7111A) + if (state->ident > SAA7111A) return -EINVAL; saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | (val ? 0x80 : 0)); @@ -1398,7 +1406,7 @@ static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); - if (state->ident == V4L2_IDENT_SAA7115) { + if (state->ident == SAA7115) { reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); @@ -1449,7 +1457,7 @@ static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) int reg1f; *status = V4L2_IN_ST_NO_SIGNAL; - if (state->ident == V4L2_IDENT_SAA7115) + if (state->ident == SAA7115) reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) @@ -1460,10 +1468,6 @@ static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) #ifdef CONFIG_VIDEO_ADV_DEBUG static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (!v4l2_chip_match_i2c_client(client, ®->match)) - return -EINVAL; reg->val = saa711x_read(sd, reg->reg & 0xff); reg->size = 1; return 0; @@ -1471,23 +1475,11 @@ static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register * static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) { - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (!v4l2_chip_match_i2c_client(client, ®->match)) - return -EINVAL; saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); return 0; } #endif -static int saa711x_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) -{ - struct saa711x_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0); -} - static int saa711x_log_status(struct v4l2_subdev *sd) { struct saa711x_state *state = to_state(sd); @@ -1496,7 +1488,7 @@ static int saa711x_log_status(struct v4l2_subdev *sd) int vcr; v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); - if (state->ident != V4L2_IDENT_SAA7115) { + if (state->ident != SAA7115) { /* status for the saa7114 */ reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); signalOk = (reg1f & 0xc1) == 0x81; @@ -1547,7 +1539,6 @@ static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { static const struct v4l2_subdev_core_ops saa711x_core_ops = { .log_status = saa711x_log_status, - .g_chip_ident = saa711x_g_chip_ident, .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, @@ -1650,21 +1641,21 @@ static int saa711x_detect_chip(struct i2c_client *client, if (chip_ver[0] & 0xf0) { snprintf(name, CHIP_VER_SIZE, "saa711%ca", chip_id); v4l_info(client, "saa7111a variant found\n"); - return V4L2_IDENT_SAA7111A; + return SAA7111A; } - return V4L2_IDENT_SAA7111; + return SAA7111; case '3': - return V4L2_IDENT_SAA7113; + return SAA7113; case '4': - return V4L2_IDENT_SAA7114; + return SAA7114; case '5': - return V4L2_IDENT_SAA7115; + return SAA7115; case '8': - return V4L2_IDENT_SAA7118; + return SAA7118; default: v4l2_info(client, "WARNING: Philips/NXP chip unknown - Falling back to saa7111\n"); - return V4L2_IDENT_SAA7111; + return SAA7111; } } @@ -1695,7 +1686,7 @@ static int saa711x_detect_chip(struct i2c_client *client, "It seems to be a %s chip (%*ph) @ 0x%x.\n", name, 16, chip_ver, client->addr << 1); - return V4L2_IDENT_GM7113C; + return GM7113C; } /* Chip was not discovered. Return its ID and don't bind */ @@ -1774,19 +1765,19 @@ static int saa711x_probe(struct i2c_client *client, /* init to 60hz/48khz */ state->crystal_freq = SAA7115_FREQ_24_576_MHZ; switch (state->ident) { - case V4L2_IDENT_SAA7111: - case V4L2_IDENT_SAA7111A: + case SAA7111: + case SAA7111A: saa711x_writeregs(sd, saa7111_init); break; - case V4L2_IDENT_GM7113C: - case V4L2_IDENT_SAA7113: + case GM7113C: + case SAA7113: saa711x_writeregs(sd, saa7113_init); break; default: state->crystal_freq = SAA7115_FREQ_32_11_MHZ; saa711x_writeregs(sd, saa7115_init_auto_input); } - if (state->ident > V4L2_IDENT_SAA7111A) + if (state->ident > SAA7111A) saa711x_writeregs(sd, saa7115_init_misc); saa711x_set_v4lstd(sd, V4L2_STD_NTSC); v4l2_ctrl_handler_setup(hdl); |